Zaibatsu: Shadowraiders
Zaibatsu: Shadowraiders Rulebook
Table of Contents
Table of Contents
- How to Use This Manual
- Shadowraiders Mode
- New Concepts to Zaibatsu Shadowraiders
- Shadowraiders Mode Game Setup
- Cybernet Preparation
- Information Blocks
- New Pawn Attributes
- Stealth Movement Ability
- Mission Cards
- Types of Mission Cards
- Reward
- Threats
- Attacking a Threat
- Combat Against a Threat
- Combat Against Multiple Threats
- Chaos Mode
- Chaos Mode Game Setup
- The Player's Turn in Chaos Mode
- Chaos' Turn
- Chaos
- The Chaos Megacard
- Black ICE Tokens
- Outbreak Mode
- Outbreak Mode Game Setup
- The Player's Turn in Outbreak Mode
- Outbreak Turn
- Total War Mode
- Total War Mode Game Setup
- Alternate Rule Sets
- Symbology
How to Use This Manual
Zaibatsu Shadowraiders is an expansion to Zaibatsu Speedrunners.
All of the basic rules for original Zaibatsu apply to Zaibatsu Shadowraiders.
If you are not already familiar with Zaibatsu, please refer to that game's manual for instructions on how to play.
This manual only addresses the new features introduced in Zaibatsu Shadowraiders.
This manual includes rules for four distinct modes of play.
Game Modes
Each game mode indicates which elements from Zaibatsu Speedrunners or Zaibatsu Shadowraiders are required for play.
Each mode indicates the following:
- Number of players.
- Approximate play time.
- Which elements from Zaibatsu Speedrunners or Zaibatsu Shadowraiders, or additional pieces (such as six-sided dice) are required to play.
- Game end requirements: Conditions necessary to win or lose the game.
Shadowraiders mode (p.04): Designed for 2, 3, or 4 players; does not use any elements from Zaibatsu Speedrunners (except the manual).
Chaos mode (p.26): Designed for solitaire play; does not use any elements from Zaibatsu Speedrunners (except the manual).
Outbreak mode (p.35): Designed for solitaire play; uses elements from Zaibatsu Speedrunners and some elements from Zaibatsu Shadowraiders.
Total War mode (p.39): Designed for 2 to 8 players; uses elements from Zaibatsu Speedrunners and Zaibatsu Shadowraiders.
Shadowraiders Mode
Players: 2-4
Playing Time: 60 - 120 min
Components
- 24 Information blocks (23 blocks and one Central Core 02)
- 24 Threat tokens
- 18 Control cards
- 54 Action cards
- 16 Pawn pieces
- 32 Control markers
- 16 Start-of-turn markers
You will also need a few six-sided dice to play.
Winning the Game
The first player to assign all of his or her control markers to information blocks and/or Mission cards wins the game.
New Concepts to Zaibatsu Shadowraiders
Threat Tokens
Threat tokens replace bonus counters from the original Zaibatsu (Zaibatsu Speedrunners p.18).
Threat tokens are used in the following game modes: Shadowraiders mode (p.04), and Chaos mode (p.26).
In Total War mode, threat tokens and bonus counters are interchangeable (p.39).
New Beginning of Turn Step
Remove all start-of-turn markers from the Cybernet.
Medals
Earn medals by completing mission cards. Each medal you earn allows you to assign one Control marker.
Once you complete a mission card, place one control marker on it for each medal in the reward.
Completed missions stay in front of you for the remainder of the game. They should remain visible to all players.
Shadowraiders Mode Game Setup
Setup is the same as Zaibatsu Speedrunners with the following changes:
Each player starts with a Shadowraider instead of a Speedrunner.
- Find the four Shadowraider control cards and shuffle them face down. Beginning with player one, each player takes a card at random.
Any remaining Shadowraider cards are removed from the game.
- Each player takes the Shadowraider pawn that matches his or her Speedrunner control card.
Any remaining Shadowraider pawns are removed from the game.
- Each player takes the eight control markers that correspond to his or her Speedrunner.
Threat Token Preparation
Shuffle all of the threat tokens face down and place them in a pile off to one side of the play area.
Cybernet Preparation
-
Place the Central Core 02 in the center of the table.
-
Each player places his or her Shadowraider pawn on the Central Core 02.
-
Randomly place the first four information blocks face up on the table, starting with player one.
Players alternate turns until all four blocks have been placed.
Place the First Four Blocks in the Cybernet
-
Roll a six-sided die.
-
Find the side that matches the direction dice printed on Central Core 02.
-
Draw an information block from the pile.
-
Place the block face up at the edge of the Cybernet in the direction that matches the die roll.
-
Position the block in a way that complies with the following rules:
A. It must be placed so that a side with a space on the new block connects to a side with a space on the block at the edge of the Cybernet.
B. It must be placed so that the far edge of the block has a space.
-
If the block has a block in Cybernet effect, the effect activates (Zaibatsu Speedrunners p.12).
Information Blocks
Information blocks in Zaibatsu Shadowraiders retain all of the elements of original Zaibatsu with the addition of two new types of spaces:
- Drone threat spaces.
- Event spaces.
Note: The Shadowraiders game mode does not use the bonus part.
Any effect that can target the Central Core can also affect the Central Core 02.
Event Space
When an information block with event spaces is placed in the Cybernet, draw one threat token from the pile for each event space on the block.
Place these tokens face up, one per threat space.
Placing Threat Tokens in Event Spaces
-
You must draw a random threat token from the reserve area.
-
Threat tokens are placed face up, in the event space.
The threat token is considered deactivated.
Note: An event space can never contain more than one threat token.
A pawn can end its move on a space containing a threat token.
A threat token remains on the board until a player deactivates it and collects it as a bonus counter (p.21).
Once a threat token has been collected, the event space is considered a normal space.
Drone Threat Spaces
Drone threat spaces are a special type of double space (p.21).
Controlling a Block
In Zaibatsu Shadowraiders, each control marker you assign earns you one medal.
Direction Dice
Determine a random direction by referring to the Central Core 02.
New Pawn Attributes
Zaibatsu Shadowraiders introduces a few new attributes that can be found on pawn control cards and action cards.
Pawn Black ICE Value
You can use a pawn's Ice-breaker ability to gain control of any pawn that has an Black ICE value (Zaibatsu Speedrunners p.28).
If a pawn fails an Icebreaker attempt against a target with Black ICE value, the pawn is eliminated.
Hand Size Modifiers
Increase the maximum number of cards you can keep in your hand during the recycle actions phase (Zaibatsu Speedrunners p.08).
Mission Slots
A mission slot allows a pawn to attach a mission card.
Pawns with a Bonus Counters Cost
Mercenary pawns have a bonus counter cost. Mercs are loyal to no one and will only work for the highest bidder.
You can gain control of a mercenary who is free of player control by doing the following:
- Move a pawn under your control to the same block as the mercenary you wish to target (Zaibatsu Speedrunners p.22).
- Pay the bonus counter cost.
- Place the mercenary's control card in front of you.
- Place the bonus counter you paid on the card.
When bonus counters are removed from a card, they are not lost. They are always returned to their original owner.
In the event that any of the bonus counters being used to pay for a pawn are lost, discard all cards attached to the pawn and place the pawn's control card in the common area. The pawn is now free from Zaibatsu control.
You can steal control of a mercenary who is under another player's control by doing the following:
- Move a pawn under your control to the same block as the mercenary you wish to target (Zaibatsu Speedrunners p.22).
- Pay the number of bonus counters on the mercenary's control card plus one.
- Place the mercenary's control card in front of you.
- Return the previous owner's bonus counters.
- Place the bonus counters you paid on the card.
If you gain control of a mercenary through other means (for example, by using an Icebreaker action), you do not have to pay the bonus counter cost.
Note: Each time a mercenary changes control, its cost increases.
ICE Value Double-Modifiers
Adds a two fixed number to the ICE value of the target.
Defense Dice Modifier
Increases or decreases the defense dice of the pawn.
Stealth Movement Ability
The stealth movement ability allows a pawn to move through a block without drawing the attention of the threats in that block.
The stealth movement ability can be activated in any of the following ways:
- Movement is activated by assigning a stealth movement action with cards from your hand.
- Movement is activated once per turn as a free action.
- Stealth movement cannot be activated.
Activating Stealth Movement Using Action Cards
Pawns that have the card-activated movement symbol can:
- Move normally using standard movement cards.
- Move normally using stealth movement cards.
Pawns that have the card-activated stealth movement symbol can:
- Move normally using standard movement cards.
- Use stealth movement using stealth movement cards.
Activating Stealth Movement Once Per Turn
- Pawns with this ability move up to three stealth steps each turn as a free action.
- Pawns with this ability move a number of stealth steps equal to a two die roll each turn as a free action.
- Pawns with this ability move a number of stealth steps equal to a one die roll each turn as a free action.
Stealth Movement Modifiers
Movement modifiers add or subtract one stealth step each time a pawn activates its movement ability.
For card-activated movement (card-activated movement symbol), add one additional stealth step for each movement card played.
In the case of movement activated once per turn (once-per-turn movement symbol), add one additional stealth step to the total steps each time a pawn activates its movement ability.
The stealth movement symbol with a cross prevents the pawn from activating any kind of stealth movement, although normal movement can still be used.
Example of Stealth Movement
In the following example we see a pawn move using a combination of normal movement and Stealth movement.
- The first card is used to activate the pawn's Stealth movement so that it can take one step into a block containing a threat token without activating it.
- Another card is used to activate the pawn's Stealth movement a second time, so that it can take one more step inside the block without activating the threat's attack die.
- Finally, a normal two-step movement card is used to move the pawn out of the block without activating the threat's attack die.
This next example shows how activating a threat's attack die cancels remaining movement steps.
- The first card used gives the pawn one step of Stealth movement, allowing the pawn to move into a block containing a threat token without activating it.
- The next card assigns the first step of normal movement. This activates the threat token's attack die and immediately ends the pawn's movement.
Note that once a threat's attack die is activated, any remaining movement steps are lost.
Mission Cards
Zaibatsu Shadowraiders has a new type of action card: Mission cards.
Mission cards represent special missions entrusted to Shadowraider pawns.
Mission cards can only be attached to pawns that have a mission slot.
Mission cards can only be attached during your action phase.
Mission cards are attached to the left side of a pawn's control card.
If a pawn is deleted, any mission cards attached to it are discarded (placed in the discard pile).
Completing a mission card allows you to earn medals or gain control of certain pawns.
If you complete a mission's requirement, place the card in front of you after collecting the reward indicated on the card (p.19).
Location-Based Missions
Some Mission cards require a specific location in order to be completed.
Location-based mission cards can be assigned in any location, but they can only be activated when the attached pawn moves to the block specified on the Mission card.
Missions with Cost
These mission cards can only be attached after paying a number of bonus counters equal to the mission's cost.
When this type of mission is completed, or if the card is discarded, any bonus counters used to pay for the mission are returned to their owner.
Mission Tags
Mark Tag
The Mark tag is used to show a hostile Mark (p.17) is active in the Cybernet.
A hostile Mark represents an objective that must be eliminated before the pawn can attach the Mission card.
The Mark is only considered active if the attached pawn moves to the block specified on the mission card.
Once the Mark is activated, the mission card must be moved so that the Mark tag is aligned with the pawn's mission slot.
The Mark remains active until the Mission card is completed or discarded.
Cargo Tag
When activated, the cargo tag shows that the attached pawn is holding cargo.
Cargo represents a companion or special object carried by the pawn attached to the mission card.
Once the cargo is activated, the mission card must be moved so that the cargo tag is aligned with the pawn's mission slot.
As long as the cargo is active, the attached pawn gains the attributes listed in the cargo tag and the class-type of the cargo.
The cargo remains active until the Mission is completed or discarded.
Other Tags
Some mission cards require the player to keep track of turns or number of targets eliminated.
These items can be tracked using the mission card's special tags.
The mission card's tags should be aligned with the pawn's mission slot in order to track the current state of the mission.
In the following example we can see how the "Terminator" mission card is used to track the number of other Shadowraiders you have eliminated.
-
Attach the mission card so that the first tag is aligned to your pawn's mission slot.
-
After completing the objective you can choose to collect the reward (in this case, a medal) or continue the mission and attempt to eliminate another Shadowraider. If you choose to continue the mission (eliminate another Shadowraider), move the mission card down so that the second tag aligns with your pawn's mission slot. After you complete the next objective the process is repeated. You can choose to collect the reward (two medals) or continue the mission and attempt to defeat another Shadowraider.
-
If you choose to continue the mission (eliminate another Shadowraider), move the mission card down so that the third tag aligns with your pawn's mission slot.
Note: If your Shadowraider pawn is eliminated before you complete the second or third objective, you must discard the mission card without earning any rewards.
It is important to use the mission tags properly because they remind all players of the current status of each mission.
Types of Mission Cards
There are several types of mission cards. What follows is an explanation of the more common types.
Elimination Missions
To complete this card's requirements and collect the reward, the attached pawn must do the following:
- Activate the Mark tag (find the target) by moving your pawn to the block specified on the mission card. 2a. Eliminate the Mark in the block specified. 2b. Eliminate the Mark and all other threats in the block specified.
If the Mark survives the attack roll, it responds with its attack die (p.20).
Mark Threat Type
A Mark is a type of threat that must be eliminated as a requirement for a mission card.
A Mark has an attack die and defence dice and can sometimes have a class-type.
Note: when the Mark tag is active, the Mark is considered to be in the Cybernet in the same block as the attached pawn but it is not considered to occupy any specific space in the block.
Escort Missions
To complete this card's requirement and collect the reward, the attached pawn must do the following:
- Activate the cargo tag: move your pawn to the block specified on the mission card.
- Move the cargo: move your pawn with the active cargo to the destination block specified on the mission card.
Note: the reward is only obtained by ending a movement action in the destination block.
Runner Missions
This type of Mission card provides the following attributes to the attached pawn:
- Icebreaker skill.
- Gadget slot.
- Maximum hand size modifier.
Bot Missions
This type of mission card provides the following cargo attributes:
- Icebreaker skill.
- Icebreaker skill modifier.
The Bot can only be activated like cargo, by moving the attached pawn to the block specified on the mission card.
Reward
After completing the requirements listed on a mission card, you may collect one of two types of rewards:
- Medals
- Control of a pawn
Medals as a Reward
After completing the requirements listed on a mission card showing medals as a reward, do the following:
- Place the mission card in front of you.
- Place control markers on the mission card equal to the number of medals you earned for completing the Mission.
Control of a Pawn as a Reward
After completing the requirements listed on a mission card showing control of a pawn as a reward, do the following:
- Place the mission card in front of you.
- Place control markers on the mission card equal to the number of medals you earned for completing the mission.
- Place the pawn's control card in front of you.
- Place the pawn into the Cybernet on the space marked with the pawn's icon.
Threats
A threat is any element in the Cybernet with an attack die.
There are four types of threats in Zaibatsu Shadowraiders:
- Drone threats.
- Threat tokens.
- Mark threats (p.17).
- Chaos (when playing the Chaos game mode only, p.26).
Attack Dice
One of the new elements included in Zaibatsu Shadowraiders is the attack die.
Attack dice indicate fixed attack values (4, 5 or 6).
When the value of an attack die matches a pawn's unshielded (white) defense die, the pawn being attacked is defeated.
In this example, the value of the attack die is four. Compare the attack die to the defending pawn's defence dice.
Since the defending pawn's matching defence die is unshielded, the attack succeeds and the pawn is defeated.
Activating a Threat
An inactive threat can be activated in the following ways:
- When a player activates the pawn's movement into or within a block where the threat is located.
- When a player activates a pawn's Delete ability in the block where the threat is located.
Attacking a Threat
A pawn can choose to attack any threat.
To attack a threat, both the pawn and the threat must be in the same block.
Eliminating Drone Threats
When a Drone threat is eliminated place a Start-of-turn marker on the space.
At the beginning of each player's turn, all Start-of-turn markers are removed from the Cybernet.
Drone threats without Start-of-turn markers return to the inactive state.
Eliminating Threat Tokens
When a threat token is eliminated place a Start-of-turn marker on the space.
At the beginning of each player's turn, all Start-of-turn markers are removed from the Cybernet.
Threat tokens without Start-of-turn markers return to the inactive state.
Collecting Threat Tokens
Any player controlled pawn can collect a threat token during his or her action phase as long as the following is true:
- The threat token is eliminated.
- There are no other threats in the block.
After taking a threat token, place it in front of you. It can now be used as a bonus counter.
Combat Against a Threat
The following example shows a pawn attempting to eliminate a threat.
- The player uses a card to move his pawn into a block containing a drone threat.
- The drone threat activates and combat begins.
- The player assigns a delete action to try and eliminate the drone. 4a. If the result of the die matches one of the drone's unshielded defense dice, the drone is deactivated before it can activate its attack die. 4b. If the result of the die matches one of the drone's shielded defence dice, the attack fails and the drone activates its attack die. 5b. The drone threat activates its attack die (value 5). 6b. Because the value of the drone's attack die matches one of the Shadowraider's unshielded defense dice, the Shadowraider is eliminated.
Combat Against Multiple Threats
There are two ways to fight multiple threats:
- By assigning a delete action to a pawn with more than one skull icon.
- By assigning a delete action to multiple pawns in the same block with skull icons.
Pawns with Multiple Skull Icons
A pawn with more than one skull icon may make a single attack roll against multiple targets in the same block.
The following example shows a player controlled pawn (the Cyberninja) and three threats (two threat tokens and one drone threat) which are all located in the same block.
The player controlling the Cyberninja assigns a delete action, allowing him to attack with three dice, one for each of the Cyberninja's skull icons.
After rolling the attack dice, the player controlling Cyberninja decides how to divide the three attack dice between the threats in the block.
If any active threats remain after assigning the attack dice, those threats initiate their attack dice.
Multiple Pawns with Skull Icons in the Same Block
If you control more than one pawn with a skull icon in the same block, you can choose to either:
- Make a single attack roll against a single threat.
- Make a single attack roll against multiple threats in the same block.
The following example shows an information block containing:
- Two pawns with skull icons controlled by a single player: one Shadowraider and one Merc C.
- Two threats: one threat token and one drone threat.
The player only needs to assign a delete action to one of the pawns he controls (either the Shadowraider or the Merc) to make all of his pawns with skull icons in the same block perform a joint attack.
The player makes only one attack roll, in this case a roll with two dice (one die for every skull icon on the attacking pawns).
After rolling the attack dice, the attacking player decides which die result will be assigned to which threat.
If any active threats remain after assigning the attack dice, those threats initiate their attack dice.
Assigning Threat Attacks
The player who activated a threat assigns that threat's attack using the following rules:
- If possible, you must assign at least one attack die to every player controlled pawn.
- Attacking pawns get priority over non-attacking pawns.
The following example shows a block containing two threats (a threat token and a drone threat), a pawn controlled by another player (Deviser D), and a Shadowraider under the current player's control.
The Shadowraider who activated the threats in the block has decided to assign the threats' attacks as follows:
- The threat token's attack die goes to the Shadowraider, who survives the attack.
- The drone's attack die goes to the Deviser. Deviser D is eliminated.
Chaos Mode
From the bowels of the Cybernet has emerged a powerful social-virus called Chaos, a rapidly mutating threat moving from system to system, spreading throughout the Cybernet to end the status quo.
As one of the mightiest Zaibatsu, you depend on your control of the Cybernet to maintain your powerful position. To win, you must prove your dominance before Chaos achieves total control of the Cybernet. If you manage to defeat Chaos, you will achieve absolute victory!
In the Chaos solitaire game mode you play as a powerful Zaibatsu facing the deadly social-virus known as Chaos.
Players: 1
Playing Time: 60 min
Components
Zaibatsu Shadowraiders components:
- 24 Information blocks (23 blocks and one Central Core 02)
- 24 Threat tokens
- 18 Control cards
- 54 Action cards
- 16 Pawn pieces
- 6 Control markers
- 16 Start-of-turn markers
Chaos mode also uses:
- 1 Chaos megacard
- 1 Chaos pawn piece
- 6 Black ICE tokens
- 6 Outbreak markers
You will also need a few six-sided dice to play.
Winning the Game
The game ends when one of the contestants (either you or Chaos) assigns all six control markers to the Cybernet and/or mission cards. That player is declared the winner.
Chaos Mode Game Setup
Set up is the same as original Zaibatsu (Zaibatsu Speedrunners p.05) with the following differences:
Player Preparations
- Choose a Shadowraider.
- Place your Shadowraider's card in front of you.
- Place six control markers corresponding to the Shadowraider you selected in front of you.
Chaos Preparations
- Place the Chaos megacard beside the Cybernet area.
- Place the Chaos pawn on its megacard, and at the beginning of your first turn, place the Chaos pawn on the Central Core 02.
- Shuffle all six Black ICE tokens facedown and place them near the Chaos megacard.
- Place the six outbreak markers next to the Chaos megacard.
Deal the Action Cards
- Draw five action cards to form your starting hand.
- Deal five action cards face down to a pile next to the Chaos megacard. These face down cards represent Chaos hand of action cards.
Cybernet Preparation in Chaos Mode
- Place the Central Core 02 in the center of the table.
- Place your Shadowraider pawn on the Central Core 02.
- Place the first four information blocks face up into the Cybernet as directed at the beginning of the game (p.07).
- Complete the rest of the Cybernet using face down blocks as indicated below.
- Stack the remaining face down blocks to form the information block draw pile.
The Player's Turn in Chaos Mode
The game is played as normal with the following additions:
- You cannot move a pawn onto a face down information block.
- You can use the Search action in two ways:
- To place new blocks at the edge of the Cybernet as usual (Zaibatsu Speedrunners p.15).
- To flip an adjacent face down information block.
After flipping over a face down block, follow these steps:
- Keep the block in the same location but rotate it however you like.
- If the block has any event spaces, place threat tokens on them.
- If the block has an effect from entering the Cybernet, resolve that effect.
End of Player's Turn
After you have finished your turn, Chaos takes its turn.
Chaos' Turn
Chaos' turn consisted of the following phases:
- Chaos action phase.
- Chaos action recycling phase (p.31).
- Remove Black ICE counters from Chaos (p.31).
- End of Chaos' turn (p.31).
Chaos Action Phase
During its action phase, Chaos can move through the Cybernet and activate abilities using its hand of action cards.
The Chaos action phase is carried out in the following manner:
- Activate Chaos movement one time (p.30).
- Turn one card from Chaos' hand of action cards face up and activate one of Chaos' abilities (p.30).
Repeat these two steps until all five cards in Chaos' hand of action cards have been used.
Note: During Chaos's action phase, Chaos will move five times and attempt to activate its abilities five times.
When you have finished resolving Chaos' five cards, begin the action recycling phase (p.31).
Moving Chaos
Move Chaos to a random block (roll a die to determine direction).
Chaos can move freely on all blocks, ignoring spaces and the effects of spaces, and can even move onto facedown blocks.
If Chaos would move outside the Cybernet, place Chaos on the Central Core instead.
Activating Chaos' Abilities
Each time you turn one of Chaos' action cards face up, activate one of Chaos' abilities.
Chaos has three abilities:
- Delete.
- Icebreaker.
- Reboot.
Chaos abilities work differently than a normal pawn.
Chaos Icebreaker Ability
Chaos takes control of the information block she is occupying (even if it is face down).
Place an outbreak marker on the block.
Chaos can gain control of any block in the Cybernet except the Central Core.
Do not activate the block under control effect when Chaos takes control of a block.
Chaos Delete Ability
- When activating its Delete ability, Chaos attacks all Zaibatsu-controlled pawns in the same block as Chaos with four Skull icons.
Note: Chaos cannot carry out attacks using the Delete ability as long as there is a counter in the "C" Black ICE space on its megacard.
Chaos Reboot Ability
Reactivate the information block occupied by Chaos by performing the following actions:
- If the block has any event spaces, place a new threat token on each of those spaces.
- If the block has an effect when entering the Cybernet, activate that effect.
Chaos Action Recycling Phase
The Chaos action recycling phase is carried out in the following manner:
Take 5 action cards face down and place them next to Chaos' megacard without looking at them.
These face down cards make up Chaos' new hand of action cards.
Remove Black ICE Counters From Chaos
During the Chaos action recycling phase, remove one Black ICE token (if any) from the Chaos megacard.
If the Chaos megacard has more than one Black ICE token on it, remove the tokens in alphabetical order (order of priority: A, B, C, D).
Return the Black ICE token to the pile face down and shuffle the pile.
End of Chaos' Turn
After finishing Chaos' turn, the Zaibatsu turn begins.
Play passes back and forth between the player and Chaos until one of the two assigns all six of his or her control markers onto the Cybernet and/or mission cards.
Chaos
Chaos is represented by a special pawn and megacard.
Chaos growing control of the Cybernet is represented by outbreak markers.
Chaos vulnerabilities are represented by Black ICE tokens.
Outbreak Markers
These indicate which information blocks are under Chaos control. Outbreak markers count as control markers.
The Chaos Pawn Piece
Moves from block to block, ignoring spaces.
Has direction dice.
When placing the Chaos pawn piece, ensure that Chaos' six direction dice match the direction dice on the Central Core 02.
The Chaos Megacard
The Chaos megacard is a special control card. It has no slots and cannot have cards attached to it.
Defence Dice Sections
Chaos has four defence dice sections, each linked to a Black ICE space.
Each section counts as a separate target.
Black ICE Space
Chaos has four Black ICE spaces. Each space has one attribute:
- Space A: Attack die.
- Space B: Attack die.
- Space C: Skull icon.
- Space D: Movement attribute.
Chaos Attack Die
Chaos attack die is activated according to the threat attack rules (p.20).
The attack only applies to the block where Chaos is located.
Reward
If you gain control of Chaos, you immediately earn six medals.
Black ICE Tokens
Begin the game face down and shuffled.
When one of Chaos defence dice sections is eliminated, draw a Black ICE token and place it on top of the corresponding Black ICE space on the Chaos megacard.
A Black ICE token on the Chaos megacard serves two functions:
- Disables one Chaos attribute.
- Opens up a vulnerability in Chaos cyber defenses as a random ICE value (depending on the value shown on the Black ICE token).
Attacking Chaos
When attacking Chaos, each defense dice section represents a separate target and may be attacked individually as outlined in the "Fighting Multiple Targets" section (p.23).
You decide which defence dice section you want to attack.
Using Area Attacks Against Chaos
When an area attack is activated (Zaibatsu Speedrunners p.23), the result of the attack roll affects every defense dice section on Chaos.
Gaining Control of Chaos
If the Chaos megacard has at least one Black ICE token on it, you may use a pawn with the icebreaker ability to attempt to gain control of Chaos.
To attempt this, your pawn must be in the same block as Chaos.
If you fail to gain control of Chaos, your pawn is eliminated by the effect of Black ICE.
If you manage to gain control of Chaos, place the Chaos megacard in front of you and place six control markers on it to represent the six medals you earned.
Outbreak Mode
From the outermost edges of the Cybernet comes reports of the deadly social-virus known as Outbreak. The infection slowly and inexorably threatens to wind its way to the very heart of the Cybernet.
As one of the largest Zaibatsu, you rely heavily on the Cybernet to maintain your power. If you manage to secure control of the Cybernet before Outbreak reaches the Central Core, victory will be yours.
In the Outbreak solitaire game mode you represent a powerful Zaibatsu using a single Speedrunner to stop the spread of the social-virus known as Outbreak.
Players: 1
Playing Time: 60 min
Components
Zaibatsu Speedrunners components:
- 23 Information blocks (the Central Core is not used)
- 24 Bonus counters
- 18 Control cards
- 54 Action cards
- 16 Pawn pieces
- 6 Control markers
- 16 Start-of-turn markers
Zaibatsu Shadowraiders components:
- 1 Information block (the Central Core 02)
- 6 Black ICE tokens
- 6 Outbreak markers
You will also need a few six-sided dice to play.
Winning the Game
The game ends as a win as soon as you assign all of your control markers to the Cybernet.
The game ends as a loss as soon as an Outbreak marker reaches the Central Core 02.
Outbreak Mode Game Setup
Set up is the same as original Zaibatsu (Zaibatsu Speedrunners p.05) with the following differences:
Player Preparations
- Choose a Speedrunner.
- Place your Speedrunner's card in front of you.
- Place six control markers corresponding to the Speedrunner you selected in front of you.
Cybernet Preparation in Outbreak Mode
- Place the Central Core 02 in the center of the table.
- Place your Speedrunner pawn on the Central Core 02.
- Build the Cybernet by placing information blocks face down as shown.
- Stack the remaining face down blocks to form the information block draw pile.
- Place the six Black ICE tokens at the six edges of the Cybernet, ensuring that the die showing on each Black ICE token matches the direction dice on the Central Core 02.
- Place one Outbreak marker on each Black ICE token.
Deal the Action Cards
- Draw five action cards to form your starting hand.
- Take 5 action cards face down and place them beside the Cybernet without looking at them. These face down cards make up the Outbreak's hand of action cards.
The Player's Turn in Outbreak Mode
The player's turn plays exactly as described in the Chaos game mode (p.29).
After you have finished your turn, the Outbreak turn begins.
Outbreak Turn
The Outbreak turn is composed of the following phases:
- Reveal Outbreak's action cards phase.
- Outbreak movement phase.
- Recycle Outbreak action cards phase.
- End of Outbreak turn.
Reveal Outbreak's Action Cards Phase
During this phase:
- Turn the Outbreak's hand of action cards face up.
- Count the number of action cards showing Icebreaker.
- If there is at least one Icebreaker action card, roll a number of dice equal to the number of Icebreaker cards in the Outbreak's hand.
Note: Delete and Reboot action cards have no effect on Outbreak and are ignored.
With three Icebreaker cards, roll three dice.
Advancing the Outbreak
After rolling the dice during the revelation phase, move the Outbreak counters as follows:
For each die result, move one Outbreak counter one block towards the Central Core.
The Outbreak marker moves without taking into account whether the block is face up or face down.
The Outbreak marker ignores spaces.
3a. If an Outbreak marker moves onto a block under your control, you lose control of that block and your control marker is removed from the Cybernet.
3b. If an Outbreak marker arrives on Central Core 02, the game ends and you lose.
It is important to mention that Outbreak markers are not pawns and are not affected by any effect that targets pawns.
This example shows a roll of three dice.
- and 2. The Outbreak counter at number six advances two blocks (one block per die).
- The Outbreak counter at number two advances one block.
Fighting Back the Outbreak
You can push back the Outbreak in the following way:
- Gain control of a block containing an Outbreak marker.
- Move the Outbreak marker back to the Black ICE token it began the game on.
Total War Mode
The Cybernet is at war! With the constant advancement of new technologies, Zaibatsu all over the world have begun to recognize that now is the time to assert dominance over their rivals by using all manner of unscrupulous and underhanded strategies.
As an ambitious Zaibatsu, you currently have the opportunity to triumph over your opponents using the many pawns under your control: genius-level cybersystem prodigies known as Speedrunners or highly trained black ops agents who operate under the codename Shadowraiders.
In the Total War game mode players will use the components from both original Zaibatsu and Zaibatsu Shadowraiders together.
Players: 2-8
Playing Time: ? min
Components
Zaibatsu Speedrunners components:
- 24 Information blocks (23 blocks and one Central Core)
- 24 Bonus counters
- 18 Control cards
- 54 Action cards
- 16 Pawn pieces
- 32 Control markers
- 16 Start-of-turn markers
Zaibatsu Shadowraiders components:
- 24 Information blocks (23 blocks and one Central Core 02)
- 24 Threat tokens
- 18 Control cards
- 54 Action cards
- 16 Pawn pieces
- 32 Control markers
- 16 Start-of-turn markers
You will also need a few six-sided dice to play.
Winning the Game
The first player to assign all of his or her control markers to information blocks and/or mission cards wins the game.
Total War Mode Game Setup
Each player rolls a die to determine the starting player.
The player seated to the left of the starting player is the second player and so on.
Starting Components for Each Player
Shuffle the four Speedrunner and four Shadowraider control cards face down and deal one to each player.
Each player takes the pawn and control markers that match his or her card.
The number of control markers each player uses depends on the number of players:
- 2-3-4 players: 8 control markers.
- 5-6-7-8 players: 6 control markers.
Return any unused control cards, pawns, and control markers to the box; they won't be used this game.
Prepare the Action Cards
Shuffle together all of the action cards from original Zaibatsu and Zaibatsu Shadowraiders and place them at one end of the table to form the draw pile.
Note: when you finish the game, the cards can be easily separated into their original decks by looking for the Shadowraiders expansion symbol.
Prepare the Bonus Counters
Place the bonus counters at one end of the table near the players.
Prepare the Threat Tokens
Shuffle all of the threat tokens face down and place them in a pile at one end of the table near the players.
Prepare the Information Blocks
Take out the Central Core from original Zaibatsu and the Central Core 02 from Zaibatsu Shadowraiders.
Shuffle together all of the information blocks from both games and place them face down into a single stack.
Note: when you finish the game, the blocks can be easily separated by looking for the Shadowraiders expansion symbol.
Prepare the Cybernet
- Set aside the Central Core and the Central Core 02.
- Take the first block from the pile and place it face down on the table without looking at it.
- Take two more blocks and place them face down on either side of the first block.
- Place the Central Core on one side of the Cybernet and Central Core 02 on the other side.
- Place the pawns into the Cybernet as follows:
- Place all Speedrunners on the Central Core block.
- Place all Shadowraiders on the Central Core 02 block.
- Place the first four blocks around Central Core 02 according to the Cybernet Preparation rules (p.07). If you are required to place a block where there is a face down block, turn that block face up instead of placing a new block.
The Game Table
Having such a large number of elements on the table may limit the growth of the Cybernet under the following situations:
A new consideration when using the search ability:
You can only place a new block into the Cybernet if there is space for that block on the table. In other words, a new block may only be placed if it does not extend off of the edge of the table or into space used by other game components.
Bonus Counters
Bonus counters are placed in the Cybernet when the corners of three information blocks form a complete Bonus icon (Zaibatsu Speedrunners p.16).
Threat Tokens in Total War
Threat tokens are placed as described in "Placing Threat Tokens in Event Spaces" (p.09).
They are collected as described in "Collecting Threat Tokens" (p.21).
Alternate Rule Sets
The Total War game mode has several alternative rule sets. These rule sets are listed below along with the changes they bring to the normal game rules.
Strategic Alliance
- 2 to 4 players.
- 8 Control tokens per player.
- Each player uses a Speedrunner and Shadowraider.
Cyber-Revolution
- Players 2, 4, 6 or 8.
- 8 Control tokens per team.
- Players are divided into two equal teams. One team controls only Speedrunners and the other Shadowraiders.
Total War - Chaos
- Players 1 to 8.
- The Cybernet begins with new configuration.
Prepare the Cybernet as normal for the Total War game mode (p.41) with the following additional step:
- Lay out the Cybernet with additional face down blocks as shown in the diagram.
At the end of each player's turn, Chaos takes her turn (p.29).
Symbology
Stealth Movement Ability (p.12)
- Allows moving in a block without activating hostiles (p.12).
- Can activate stealth movement by assigning action cards (p.12).
- Can move up to three steps with stealth movement each turn as a free action.
- Can move a number of steps with stealth movement equal to a one die roll each turn as a free action.
- Can move a number of steps with stealth movement equal to a two die roll each turn as a free action.
- Cannot perform stealth movement.
Modifiers (p.12)
- Add one stealth step.
Reward (p.19)
- Gain one medal as a reward.
- Gain two medals as a reward.
- Gain three medals as a reward.
- Gain six medals as a reward.
- Gain control of Deviser A as a reward.
- Gain control of Deviser B as a reward.
- Gain control of Deviser C as a reward.
- Gain control of Deviser D as a reward.
Event Spaces Indicator
- Threat tokens are placed in this space (p.09).
Attack Dice (p.20)
- Indicates a fixed attack value of four.
- Indicates a fixed attack value of five.
- Indicates a fixed attack value of six.
Pawn with a Bonus Counters Cost (p.11)
- Pawn with a bonus counters cost.
Direction Dice
- Determine a random direction (p.09).
ICE Value Double-Modifiers (p.11)
- Adds a two fixed number to the ICE value of the target.
Defense Dice Modifiers (p.11)
- Removes the shield of a shielded die.
- Removes the shield of a two shielded die.
- Add shield to an unshielded die.
Class-Types
- Razorblade.
- Sniper.
- Pawn Black ICE value (p.10).
Operative Insignia
- Operative insignia.