RulesPal
Chat
Rulebook
XIII: Le Complot thumbnail

XIII: Le Complot

XIII: Le Complot Rulebook

Table of Contents

Table of Contents

  • 1. Object of the Game
  • 2. Length of a Game
  • 3. Components
  • 4. Game Setup
    • 4.1. The "Character" Cards
    • 4.2. Components Received by Each Player
    • 4.3. Components Placed by Each Player
    • 4.4. "Mission" Cards
    • 4.5. "Action" Cards
    • 4.6. The "Order of Play" Board
    • 4.7. Other Elements
  • 5. Description of the Components
    • 5.1. The Game Board
    • 5.2. The "Order of Play" Board
    • 5.3. The "Turn" Board of Each Player
    • 5.4. The "Character" Cards
    • 5.5. "Combat Units"
    • 5.6. "Mission" Cards
    • 5.7. "Action" Cards
  • 6. Phases of the Game
    • 6.1. Random Draw for the Turn Order
    • 6.2. Draw of Missions
    • 6.3. Discarding and Receiving Cards
    • 6.4. Receiving Autonomy Points
    • 6.5. Recruiting Characters and Buying Units
    • 6.6. Movement
    • 6.7. Combat
    • 6.8. Resolution of Missions

1. Object of the Game

The player who wins the game is the one who has accumulated the most investigation points. In the case of a tie between two players, the player who has completed the greater number of primary missions wins the game.

Investigation points are gained:

  • By completing primary missions.
  • By killing enemy characters.
  • By completing secondary missions.

2. Length of a Game

A normal game lasts 5 turns; a long game lasts 8 turns. The players agree on the number of turns for the game (between 5 and 8).

3. Components

  • 1 game board
  • 20 primary mission cards
  • 110 cards, including 13 "Secondary Mission" cards, 29 "Character" cards (2 of them duplicates) and 68 "Action" cards
  • 27 character miniatures
  • 15 miniature bases (3 per player)
  • 55 unit tokens (11 per player)
  • 24 neutral unit tokens
  • 10 player pawns (2 per player)
  • 5 player tokens (1 per player)
  • 8 "Turn" tokens numbered 1 to 8
  • 1 "Order of Play" board
  • 2 "Results Table" boards
  • 5 "Turn" boards (1 per player)
  • 8 markers (gold for combat missions, silver for plots, black for secondary missions, and white for blocked locations)
  • 20 wound markers
  • 8 six-sided dice

4. Game Setup

4.1. The "Character" Cards

Sort the "Character" cards: separate the cards with a light background (secondary characters) from those with a brown background (main characters).

With 5 players: keep all the main characters, and remove from the game the light-background characters General Carrington and President Sheridan.

With 4 players: remove from the game the brown-background General Carrington and the light-background President Sheridan.

With 2 or 3 players: remove from the game the brown-background characters: General Carrington and President Sheridan.

Once the sorting and removal are done, the main characters are dealt at random to the players: each player receives one character, which they place face up in front of them. The remaining main characters are set aside.

The other "Character" cards are shuffled and placed face down beside the game board.

4.2. Components Received by Each Player

Each player receives:

  • 1 "Turn" board.
  • 1 player token in their colour.
  • 2 pawns (1 for investigation points and 1 for autonomy points).
  • 3 miniature bases.
  • The miniature corresponding to their character.
  • 11 combat units.

4.3. Components Placed by Each Player

Each player places:

  • 1 pawn at the start of the "Investigation Point Track" on the game board.
  • 1 pawn on their "Turn" board, on the "Autonomy Point Track", in the sixth space.
  • The miniature of their character on its base at "Location No. 1" on the game board, accompanied by 2 agents.
  • The remaining combat units in front of them, together with their character card.

4.4. "Mission" Cards

The "Mission" cards are shuffled and placed in 2 equal piles beside the game board.

4.5. "Action" Cards

The "Action" cards are shuffled and placed face down beside the game board.

4.6. The "Order of Play" Board

The "Order of Play" board is placed beside the board, and the "Turn" tokens are stacked in ascending order (1 on top) in the space provided. One is removed at the start of each turn. The players' tokens will be placed later on the numbered tabs.

4.7. Other Elements

The other elements: neutral units, wound markers, mission markers, character miniatures, blocking, delivery and retreat markers, and the dice are placed beside the game board.

5. Description of the Components

5.1. The Game Board

The game board consists of 33 locations, each with a name and a number. These names and numbers also appear on the primary and secondary mission cards.

On this board, the players move their characters and combat units along the paths drawn between the locations.

The different types of location:

  • Locations circled in blue are recruitment locations. They allow a player to gain a new character when, at the start of a turn, one of their characters is on the location. You may recruit only one new character per location, regardless of how many of your characters are present on it.

  • Locations circled in red are hospitals. They allow a player to heal a wounded character when, at the start of a turn, one of their characters is on the location. For each player, only one character may be healed per hospital.

  • Locations circled in green are action locations. They allow a player to gain an additional "Action" card. The player who has a character on this location at the start of the turn receives two "Action" cards and chooses one to add to their hand; the other is placed back under the draw pile.

  • Locations circled in yellow are autonomy locations. They allow a character on this location at the start of the turn to receive 2 additional autonomy points. You may receive only one autonomy bonus of 2 points even if several of your characters are on this location.

5.2. The "Order of Play" Board

The "Order of Play" board shows which turn is currently being played, and the order of play for the current turn (given by the order of the players' tokens).

5.3. The "Turn" Board of Each Player

The "Turn" board of each player is used to keep track of the autonomy points available to the player. It contains a reminder of the different phases of the game, and the value of purchasing units.

5.4. The "Character" Cards

There are 27 characters in the game, each with its own special skills and powers. Each card shows:

  • The character's name.
  • Their special ability (assassination, capture, corruption, financier, infiltration, recruitment, seduction).
  • Their combat skill (2 to 6) and plot skill (2 to 6).
  • Their hit point(s) (1 to 3).
  • Their value when eliminated by another player (1 to 3).

When a character receives a number of wounds equal to their hit points, they are permanently eliminated from the game.

A player may not have more than 3 characters at the same time, but may discard a character to replace them with another.

The characters Sheridan and Carrington exist in two versions (with different values) to account for the number of players (see the section on game setup).

The special abilities of the characters are as follows:

Seduction Used in Phase 3. Allows the player to receive one additional "Action" card during the card-receiving phase. You draw 2 additional "Action" cards, keep the one of your choice, and put the other back under the "Action" deck.

Financier Used in Phase 4. Allows the player to receive 2 additional autonomy points.

Recruitment Used in Phase 5. Roll a die and check the result:

  • 1 to 2: failure.
  • 3 to 4: receive an agent.
  • 5: receive a commando.
  • 6: draw a new character.

Assassination Used in Phase 6. After moving, the player may attempt a special attack when they are on a location adjacent to, or on the same location as, another enemy character. Roll a die and check the value:

  • 1 to 4: failure.
  • 5 to 6: wound.

If the assassination succeeds, the character hit suffers a wound. The assassin never suffers a counterattack.

Infiltration Used in Phase 6. Allows a character, once per turn, to pass through an occupied location without having to stop there. The power also allows the character to prevent infiltrations on the location where the character is.

Capture Used in Phase 7. During a combat, the player may attempt to capture an enemy character who is on the same location. Roll a die and check the value:

  • 1 to 4: failure.
  • 5 to 6: capture.

If the capture succeeds, the captured character goes to interrogation. Roll a die and check the result:

  • 1: the character betrays, and you may add them to your characters (you may have to discard one of your characters). The captured character may immediately fight.
  • 2 to 6: you gain investigation points equal to the character's value if the character is eliminated, and you return the character to its owner.

Corruption Used in Phase 7. During a combat, you may attempt to make an enemy unit betray its side (except neutral units). Roll a die and check the result:

  • 1 to 3: failure.
  • 4 to 6: the unit betrays and comes to fight at your side without respecting the maximum concentration rule.

At the end of the combat, the player must eliminate any surplus units and respect the maximum concentration rule.

5.5. "Combat Units"

"Combat Units" are purchased in Phase 5. All units have one hit point, which means a single wound is enough to eliminate them. Each unit shows its combat value: this is the value that must be reached or exceeded to inflict a wound on an opponent.

Special units have specific abilities:

Assassin During a combat, it can always target the unit or character of its choice. The player controlling the assassin therefore chooses which unit or character receives the wound.

Sapper Allows 2 dice rolls instead of one during a combat.

Saboteur The saboteur is a unit that prevents any infiltration on the location where it is. In addition, during combats, each time an opposing player rolls a die and obtains a 1, that player receives an additional wound, which affects their characters or units present on the location.

5.6. "Mission" Cards

There are 5 types of "Mission" cards: Combat, Plot, Defence, Combat/Delivery and Plot/Delivery. These mission types are indicated on the back of the "Mission" cards.

Each "Mission" card shows:

  • The location of the mission.
  • The type of mission.
  • A description.
  • The objective of the mission.
  • The (neutral) enemies, if any.
  • Possibly, the action to take in case of failure.
  • The number of investigation points to gain if the mission is successful.

The types of mission are as follows:

"Plot" missions To carry out the mission, the player must go to the location indicated on the card with at least one character and attempt to foil the plot. A plot value is shown on the card: 0, -1 or -2. It is subtracted from the player's die result. If the result obtained is lower than the plot skill of the character, the mission is not successful.

"Combat" missions To complete the mission, the player must go to the location of the mission and kill the neutral units present on the location. If the player manages to eliminate the neutral units, the mission is successful.

"Defence" missions To complete the mission, the player must go to the location of the mission and hold the location for 2 turns, preventing the other players from seizing it. Some defence missions require the player to face neutral units before seizing the location.

"Delivery" missions To complete the mission, the player must go and fetch a character or an object from one location and bring it to another location. The mission may take several turns to complete. "Delivery" missions are linked either to a "Combat" mission or to a "Plot" mission, and it is not necessarily the same player who completes both parts of the mission; in that case the investigation points are shared between the two players.

5.7. "Action" Cards

There are 21 types of "Action" card. Each card shows the game phase in which it may be played, and a description of the action it allows.

The "Action" cards comprise:

Accusation (2 cards) Played at any time. Causes the opponent of your choice to lose 3 investigation points.

Spy (2 cards) Played at any time. Allows you to draw 2 cards at random from another player's hand. The player chooses one of the 2 cards and adds it to their hand; they return the other to its owner.

Innocent (1 card) Played at any time. Cancels an accusation or a spy. This card must be played in response.

Intelligence (1 card) Played at any time. Allows you to secretly look at the next 2 missions. Only the top card of each pile may be looked at.

Support (3 cards) Played at any time. Allows you to re-roll the die of your choice: your own or an opponent's, when you are directly concerned, for example during a combat or for the success of a mission. It cannot be used when another player is attempting a mission.

Care (4 cards) Played at any time. Allows you to remove one wound from a character. A player may play several "Care" cards on the same character or unit. This card may be played at any time, including during a combat, to immediately eliminate a wound.

Scoop (2 cards) Played in Phase 1. Choose the order of play of the players. This card may be played before or after the player's draw for order of play.

New Mission (1 card) Played in Phase 2. Allows you to add one primary mission in addition to those already present.

Change of Mission (1 card) Played in Phase 2. Replace a mission of your choice with a new one that you draw from the top of one of the 2 mission piles. The replaced mission is placed under the pile of your choice.

Recruitment (4 cards) Played in Phase 5. Allows you to draw a new character. You may have to discard one of your characters if you have more than 3.

Helicopter (4 cards) Played in Phase 6. Allows the player to move 2 additional locations.

Plane (3 cards) Played in Phase 6. Allows you to transport one character and 3 units to any location that is not an active primary mission or a location occupied by enemies.

Tip-off (2 cards) Played in Phase 6. Allows you to prevent an infiltration. The player attempting the infiltration must stop. They will have to fight in Phase 7. This card must be played at the precise moment the player attempts to infiltrate; it is no longer valid if the player continues their movement afterwards. The player attempting the infiltration must announce it aloud.

Blockade (3 cards) Played in Phase 6. Allows you to close a location for one turn: no character or unit may pass through it. Only an empty location may be blocked; place a white marker on it. A helicopter may not fly over a blocked location.

Incognito (2 cards) Played in Phase 6. Allows you to pass through any location occupied by enemy units or characters. This card is the equivalent of the infiltration power; it can only be countered by a "Tip-off" card.

Attack (2 cards) Played in Phase 6. A bomb explodes on the location of your choice that is not an active primary mission. Roll the die and check the result: on 4 to 6, the bomb inflicts a wound on the target of your choice.

Secondary Missions (13 cards) Played in Phase 6. The player who uses this card must place it during their movement turn. The player who controls the location at the end of the turn wins the investigation points.

Alliance (3 cards) Played in Phase 7. You prevent any combat on the current mission. This card must be played before the players have placed their "Combat" cards. The first player present on the location must complete the mission. If the mission is completed, you share the investigation points (rounded down) with the player who completed the mission. On the following turn, all players benefit from the infiltration power to withdraw from the location without leaving units or characters behind to fight; they are considered to coexist peacefully. If units or characters of at least 2 players are still on the location at the end of the movement phase, then there will be combat.

Evasion (3 cards) Played in Phase 7. Allows a character alone or accompanied by units to escape before the first round of combat without suffering wounds. The card must be played before the players have placed their combat cards.

Combat (14 cards) Played in Phase 7 or 8. These cards improve the combat skills of a character or a unit by +1 to +3. Once played, they are permanently assigned to a character or unit. A character or unit may hold only one card. If the character or unit is killed, the card is immediately discarded. At the end of the combat, or in the event of a retreat, all cards are discarded.

Plot / Combat (10 cards) Played in Phase 7 or 8. These cards improve a character's combat and plot skills by +1 to +3 when carrying out a primary mission.

6. Phases of the Game

A turn of the game consists of 8 phases:

  • Phase 1: random draw for the turn order.
  • Phase 2: draw of missions.
  • Phase 3: discarding and receiving cards.
  • Phase 4: receiving autonomy points.
  • Phase 5: recruiting characters and buying combat units.
  • Phase 6: movement.
  • Phase 7: combat.
  • Phase 8: resolution of missions.

6.1. Random Draw for the Turn Order

On the first turn, each player rolls a die to determine which player will carry out the draw for the Order of Play: the player with the highest score carries out this draw. For subsequent turns, the player who was in last position on the previous turn carries out the draw.

Draw for the Order of Play: the player tokens are turned over and shuffled, then drawn at random to determine the order of play. The first token drawn indicates the first player for the turn; it is placed on tab 1 of the "Order of Play" board, and so on.

All the following phases of the turn are resolved in this order, unless a "Scoop" card is played.

6.2. Draw of Missions

A mission is drawn by a player who chooses a card from the top of one of the two piles.

On the first turn, it is the first player who reveals the primary missions.

On subsequent turns, the player with the fewest investigation points chooses the first mission to be renewed, with a die roll in case of a tie. If a second primary mission must be renewed, it is the second player with the fewest investigation points who chooses a mission.

The number of primary missions is determined by the number of players:

  • 2 when playing with 2, 3 or 4 players.
  • 3 when playing with 5 players.

When a pile of primary mission cards is exhausted, play continues with the remaining pile.

6.3. Discarding and Receiving Cards

Discarding During this phase, each player may discard all or part of their hand.

Receiving At the start of their turn, each player must complete their hand so as to have 5 cards. If the player has a character with the Seduction power and/or a character on a green-circled location, they draw 2 additional cards, keep one of their choice, and put the other under the pile.

When the "Action" card pile is empty, the discarded cards are taken back, shuffled, and form a new pile.

6.4. Receiving Autonomy Points

Each player receives 6 autonomy points, plus 2 points for each living character on the board who has the Financier power, and/or plus 2 points for a character present on a yellow-circled location. Only one character may claim an autonomy bonus per autonomy location.

No autonomy point may be kept from turn to turn (except when playing the variant).

Autonomy points are used to make movements and to purchase units.

6.5. Recruiting Characters and Buying Units

Recruiting characters To draw a new character, it is enough to:

  • Have a character on a blue-circled location.
  • Play a "Recruitment" card.

If you have the possibility of making several recruitments in the same turn, you draw them all and then choose which ones to keep. The others are placed back under the "Character" card pile.

A player may not have more than 3 active characters on the board.

Buying units At the start of their turn, each player may buy new units at the following prices:

  • 1 autonomy point for an agent.
  • 2 autonomy points for a commando.
  • 3 autonomy points for a special unit (assassin, sapper, saboteur).

Placing new units and new characters Units and characters may only be placed on a location that already contains units or characters of the player. If the player no longer has any units or characters, they may be placed on an empty location that is not an active primary mission. If the player has all of their units and characters on the same location and the addition of a new unit causes the maximum concentration to be exceeded, the player may decide to eliminate the unit of their choice. This is a method of changing the type of unit on a location. The exchanged unit is returned to the player's reserve.

A player may discard one of their characters in play to replace it with one of the characters they have just drawn. This new character must be placed on a location containing at least one unit or character of the player. The card of the replaced character is placed back under the "Character" card pile, and its wounds are removed.

6.6. Movement

Characters and units move from one location to another following the existing paths on the board. For each move from one location to another, the player spends one autonomy point.

A player may move their units or characters:

  • Alone: one autonomy point allows you to move one unit or character by one location.
  • As a group: units or characters may move as a group for a single autonomy point, be picked up or dropped off during the same move, and all may retrace their steps.

The movement capacity given by autonomy points may be increased by certain cards.

Each time a unit or character arrives on a location containing a unit or character of another player, it must stop, unless the moving player:

  • Has a character with the Infiltration power.
  • Or leaves behind as many units or characters as there are enemy units or characters on the location. In this case, the remaining elements may pass through a location occupied by enemies.

A player who has not yet moved and who is attacked may leave the location if they have a character with the Infiltration power or an "Incognito" card; otherwise they must leave on the location as many elements as their attacker has elements, so that the rest of their units and/or characters can move on.

Example: the attacked player had 2 characters and 2 units on a location; the attacker moves 1 character and 2 units onto this location. The attacked player must leave 3 elements on the location: 2 units and 1 character, or 2 characters and 1 unit.

Combats will take place in Phase 7.

Maximum concentration On a location, a single player may not have more than 3 characters and 3 units. However, this maximum concentration may be exceeded during a movement, but it must be respected at the end of the movement.

Infiltration This ability allows a character and the units accompanying them to pass through a location occupied by enemy elements without stopping (and therefore without fighting). A character with the Infiltration power may use it only once per turn. A player attempting an infiltration must announce it clearly and aloud, so that it may be countered by a "Tip-off" card. Infiltration is impossible if the location passed through contains:

  • An enemy character with the Infiltration ability.
  • An opposing "Saboteur" unit.

Placing secondary missions On their turn, each player may place one or more secondary missions, displayed where everyone can see them. They may be resolved by another player.

6.7. Combat

Combats are resolved one after another following the Order of Play. The first player therefore carries out all of their combats first, whether as attacker or defender. The defender is always the first player present on a location. The attacker is the player who arrived second.

Multi-player combats If there are more than 2 players on a location, the first player to arrive on the location decides which player they will fight first. The survivor of this first combat then chooses which player to fight next, and so on.

Combat values Each unit or character has a combat value:

  • Agent, saboteur, sapper and assassin: 5 or 6.
  • Commando: 4 to 6.
  • Character: 3 to 6.

Course of a combat In all the steps that follow, the attacker performs the actions first, then the defender:

  1. Use of powers (capture or corruption). These powers may be used only once, at the start of the combat.
  2. Placing combat cards and assigning them to units or characters (this assignment cannot be changed afterwards).
  3. First round: the attacker rolls the dice for all of their elements. The dice may be rolled simultaneously if the elements have the same combat value; otherwise they are rolled independently, and the player specifies for which element each die is rolled. Bonuses are added together, and the wounds inflicted on the opponent are recorded. The defender does the same.
  4. Each player chooses which elements receive the wounds they inflict (unless the opponent has an assassin, which chooses who receives a wound). Eliminated elements are removed from the combat.
  5. The attacker, then the defender, declares whether they make a "Retreat" or not.
  6. If neither makes a "Retreat", a new round begins. Return to step 3.

Retreat A retreat is possible only after the first round of combat and does not consume any autonomy point. The retreat is global: it concerns both the character and the units. The retreat is made as a group: the character and the units must finish the retreat together. A retreat is possible to an adjacent location, occupied or not by enemy units, but in that case the player automatically suffers 1 wound and must continue the retreat to the next location. If the retreat ends on a location occupied by one's own units and this creates a contradiction with the maximum concentration rule, the player must retreat again. A player who has retreated receives a retreat marker, which they place beside their character or units. This means that they may not carry out any primary or secondary mission during this turn with the elements that retreated. When retreating to a bonus location, the player benefits from its advantages on the following turn.

6.8. Resolution of Missions

Following the Order of Play, the first player resolves their primary and/or secondary missions in the order they wish. They fight the neutral units if needed. If successful, the investigation point marker is advanced by the number of investigation points gained.

Then it is the second player's turn to proceed in the same way, and so on until all players have attempted to resolve their missions.

Once this phase has been played, the primary and secondary missions that have been resolved are permanently removed from the game; the players keep them in front of them.

Failure of a primary mission Some cards state what happens if the mission fails. These failure instructions must be carried out, and then the player retreats, subject to the same retreat rules as in combat.

If the primary mission is not successful, there must be no unit or character on the location.

Validity of a primary mission Once the failure instructions have been carried out, the validity of the mission is checked.

The player who failed rolls the die and checks the result:

  • 1, 2 or 3: the mission remains in place.
  • 4, 5 or 6: the mission card is placed under a pile, and a new mission will be drawn in the next turn.

Examples of plot:

  • Plot 0 and a character with plot skill 4, 5 and 6: the player rolls the die; if they roll less than 4, the mission is not successful; if they roll 4, 5 or 6, the mission is successful.
  • Plot -1 and a character with plot skill 4, 5 and 6: the player rolls the die; if they roll less than 5, the mission is not successful; if they roll 5 or 6, the mission is successful.

Example of combat:

Neutral units: 1 agent with combat values 5 and 6, and 1 commando with combat value 4, 5 or 6. A character with combat value 3, 4, 5 or 6, accompanied by 2 agents with values 5 or 6. The player rolls the die for their character; if they roll 3 or more, it inflicts a wound; if they roll less than 3, it inflicts no wound.

The player then rolls 2 dice simultaneously for these 2 agents; they must obtain at least 5 or 6 on each die to inflict a wound per die.

Another player rolls the die for the neutral units: one die for the agent and one die for the commando. If they roll 5 or 6 for the agent, it inflicts a wound. If they roll 4, 5 or 6 for the commando, it inflicts a wound.

The player distributes their wounds among their characters and combat units. The player who rolled the dice for the neutral units does the same.

Units or characters that are killed are removed from the location.