World War II: Battle for Moscow, 1941
World War II: Battle for Moscow, 1941 Rulebook
Table of Contents
Table of Contents
- Introduction
- Historical Note: The Invasion of the USSR
- Preparation
- Components
- Unit Card
- Course of the Game
- General Rules
- Line of Sight
- Fire Test
- Infantry Cover
- Close Combat
- Historical note: birth of the Soviet Guards
- Orders
- Special unit properties and abilities
- Headquarters and command
- Engineering structures
- Additional elements
- Terrain
- Winter terrain
- Settlements
- Hill
Introduction
Each unit in the game is represented by a personal card that lists every order that can be given to that unit and every special property and status it can have. A unit cannot receive an order whose symbol is not on its card. For example, if the card has no "Fire on the move" order symbol, that unit cannot receive the "Fire on the move" order.
The game is built on realistic depiction of combat on the tabletop. It is impossible for a board game to capture every nuance and subtlety. But in this game, as in a real battle, the basic rules that apply to any commander apply, and they can be considered tactical advice for players:
- Try to anticipate the enemy's actions.
- Bluff, and try to mislead your opponent.
- Conduct reconnaissance.
- Make skilful use of the features of the terrain.
- Concentrate fire and attacks on the main targets and objectives.
- Preserve your troops; do not expose them to enemy fire.
The Great Patriotic War game is an expandable game system. The starter sets contain the units needed to learn the rules and play several simple scenarios. The system is constantly being supplemented with new sets of infantry, artillery, tanks and aircraft, which are sold separately. Each set includes a unit card with that unit's unique properties and possible orders. Information about all additional sets and game expansions can be found on the website www.art-of-tactic.com, which is updated regularly.
You can create your own scenarios or download new scenarios from the website www.art-of-tactic.com. The scenario library is constantly updated, and you can take part in adding to it.
How to use this rulebook
This rulebook is written for players who have already studied the Commander's Basic Course. If you are picking up the rules for the first time, set this book aside and take up the Commander's Basic Course, which shows the first steps in the game and covers only the basic points of the rules. After you have studied the Commander's Basic Course and fought your first battle, return to this rulebook, and you will learn about the additional possibilities of the game. If you downloaded these rules from www.art-of-tactic.com, download the Commander's Basic Course from the same site too; it is better to start with it. Players who downloaded the rules from the site should note that it is best to learn them with the game components from the starter set at hand.
So, set these rules aside and take up the Commander's Basic Course. We will come back to this book later.
Historical Note: The Invasion of the USSR
On 22 June 1941, at 4 a.m., German forces attacked the Soviet Union without declaring war. Air raids were carried out on Kiev, Sevastopol, Zhytomyr, Kaunas and several other cities. This began the war between Germany and the Soviet Union, which later came to be called the Great Patriotic War.
As a result of the surprise attack delivered by the army groups "North", "Centre" and "South", a large quantity of Soviet military equipment, as well as ammunition and fuel, was captured or destroyed on the first day of the war. In the first days of the war Soviet troops made several attempts to counterattack the enemy, but these attempts were unsuccessful.
On the same days, Germany's allies declared war on the USSR: Italy and Romania on 22 June, Slovakia on 23 June, Finland on 26 June, and Hungary on 27 June.
By 10 July the main forces of the Soviet Western Front had suffered defeat in the Battle of Białystok–Minsk. Latvia, Lithuania, Belarus, and part of the territory of Ukraine, Moldavia and Estonia were captured by German troops.
The North-Western Front also suffered defeat and was thrown back. Nevertheless, on 14–18 June the troops of the 11th Army delivered a counterattack at Soltsy, which became one of the first successful Soviet counterattacks and held back the German advance on Leningrad for almost a month.
Preparation
Before you start the game, you will need to carry out several actions. Try not to break the order of the actions, so that nothing is missed or forgotten.
-
Decide with your opponent, by any convenient method, who will command which army.
-
Choose a scenario from the scenario book that comes with the starter set.
You can also download a scenario from the website www.art-of-tactic.com, or devise your own scenario.
-
If you have decided to play a scenario of your own, agree with your opponent on the number of points each side will spend on recruiting units into its formations.
-
Choose the units you will play with and take all the necessary unit models and their cards. The unit models must be assembled beforehand, using the assembly diagram.
-
Assemble the game board on the table or on any other convenient flat surface, as shown in the scenario.
-
Determine the wind direction and make the corresponding entry on the turn card (pages 12–13).
-
Determine the direction of the river current and make the corresponding entry on the turn card (page 13).
-
Place the units as the scenario's conditions require. Remember that, besides the space for the game board, you will also need free space around it for the cards and for the dice roll.
-
Prepare the dice. They should lie on the table where both players can conveniently reach them.
-
Take two markers. Keep one yourself and give the other to your opponent, so that they do not ask you for it every turn and distract you from important matters.
-
One of the players must keep the turn card and make the necessary marks on it.
Components
The components needed for play are: the game boards; additional hexes; unit cards; the turn card; additional cards; the unit models; two markers for the cards; and six-sided dice.
The original illustrates the components with numbered callouts: 1 unit cards; 2 markers for cards; 3 six-sided dice; 4 turn card; 5 game boards; 6 unit models.
Unit Card
A unit is the basic element of the game. It is represented by a model on the game board and by a card listing its characteristics, properties and the orders available to it. The same number must be written on the unit's card and on its flag.
Front side of the unit card
The front side shows all of the unit's characteristics and properties.
Unit strength. The maximum strength of the unit. For each damage received, one symbol is crossed out. When the last symbol is crossed out, the unit is removed from the game board.
Unit symbol. The symbol that matches the card to the unit's model.
Unit type. The unit's membership in a particular type. The same number as on the unit model's flag must be written in this box. The game features the following unit types:
- Infantry
- Artillery
- Transport
- Armoured vehicles
- Light tanks
- Medium tanks
- Heavy tanks
- Light aircraft
- Heavy aircraft
Stamina. Stamina is the combined measure of the fighting spirit of the soldiers, the training and experience of the command staff, and the cooperation and mutual understanding between soldiers and commanders. It determines how the unit acts in critical situations.
- Stamina Test passing rule: the rule for passing the Stamina Test, shown on the card.
- Starting value of unit Stamina: the unit's starting Stamina is written in the box provided.
- Reduction of Stamina for each damage taken: the unit's Stamina decreases as shown in its table, and the new Stamina value must be written in the box.
When a Stamina Test is taken, the unit's Stamina is the value after all damage received is taken into account. A unit's Stamina is increased if it is inside the command zone of a Headquarters unit (see Raising Morale, page 35).
Defense. Defense is the combined measure of the unit's protective equipment (armour, in the case of tanks) and the level of training of its soldiers (crew). For example, a unit of T-34 tanks with an ordinary crew has less Defense than an identical unit of tanks with a Guards crew.
- Own Defense value of the unit: the box in which the unit's new Defense value is to be written.
Some orders, engineering structures and terrain types increase (or decrease) a unit's Defense. All Defense values are summed. For each hit received during the turn, the Defense value decreases by one point. Hits received by the unit during a turn are added together. If Defense becomes 0, each new hit counts as damage. At the start of each turn the unit's Defense is reset to its starting value.
Example. In one turn, a platoon of T-34 tanks with Defense 3 was the target of "Fire" orders from a platoon of Pz.IV tanks and two platoons of Pz.III tanks. The T-34 platoon carries out the "Defence" order and is in light woodland, so it has an additional +1 Defense from the order and +1 from the terrain. The total Defense of the T-34 platoon this turn is 5. Write the current Defense value as shown in the illustration.
The Pz.IV platoon's fire scores two hits. The T-34 platoon's Defense becomes 3. The fire of the first Pz.III platoon scores one hit, and the T-34 platoon's Defense becomes 2. The fire of the second Pz.III platoon scores three hits. The first two hits reduce the T-34 platoon's Defense to 0. The third hit, since the T-34 platoon no longer has any Defense, counts as damage and reduces the unit's strength by one. Thus, after fire from three enemy units during one turn, the T-34 platoon has strength 2 and no Defense.
Because the T-34 platoon has lost strength, it must now pass a Stamina Test. The test is failed, and the unit is in the state Suppressive Fire.
Special abilities and unit properties. A unit must follow, during play, the special rules described by the properties listed on its card. A unit cannot use a property or ability that is not listed on its card. The rules for all properties are described on pages 34–35.
Unit status. The states the unit may enter. When the unit enters one of these states, a mark must be made in the corresponding box. The unit may remain in an adopted state into the next turn.
Ammunition. The unit's maximum ammunition. One unit of ammunition is represented by the image of one clip.
When some orders are carried out, the number of ammunition units stated in the description of the order must be crossed out. When ammunition is replenished, the marks are erased.
Some units must choose a type of ammunition before the start of the game. Any ammunition type that will not be used must be crossed out.
Cost. Used when forming armies before the start of the game and when counting victory points in certain scenarios.
Firepower. The firepower block of the card contains:
- Target type;
- Fire intensity;
- Range and accuracy;
- Army colour.
Target type. The types of unit against which this unit can inflict damage. A unit cannot designate as its target an enemy unit whose type is not listed on its card.
Fire intensity. Each target type has its own fire intensity scale. In each box of the scale, depending on the unit's strength, the number of dice for the Fire Test is given. As a unit's strength decreases, its fire intensity decreases.
Example. When a full-strength unit (2 figures) fires at infantry, 10 dice are rolled; a reduced unit (1 figure) rolls 6 dice.
Army colour. A target type shown in red indicates that the target can be hit only in Close Combat.
Range and accuracy. The first hex is the hex on which the player's own unit stands. The value in the first hex is used only in Close Combat. The remaining hexes show the distance at which an enemy unit can be hit. In each hex the maximum value is given that must come up on a die for a hit during a Fire Test. The symbol shown on the card for Close Combat indicates that in Close Combat this unit's fire intensity is 1 (one die is rolled).
Example. For this unit, every die value above the stated accuracy is a miss. When firing from heights the range is increased (page 43).
Reverse side of the unit card
The reverse side of the card shows the symbols of the orders the unit may carry out. A unit cannot, under any circumstances, carry out an order whose symbol is not shown on the reverse side of its card. The detailed description of each order is given in the section "Orders" (pages 14–33).
Course of the Game
The game lasts several turns according to the scenario. One turn of the game consists of four phases:
- Giving orders;
- Recovery tests;
- Radio interception;
- Execution of orders.
A phase is considered complete when all players have finished their actions. Until the first phase is finished, nobody may begin the actions of the second phase.
Phase 1: Planning and giving orders to units
Players must give orders to all their units secretly from the opponent. In this phase the players must not see which orders are being given to the enemy's units. A single unit cannot receive several orders at once. To give an order to a unit, put marks in the corresponding order boxes. If a player, for whatever reason, has not given an order to one of their units, that unit is considered to be carrying out the Wait order for this turn (see page 32). After a unit has been given an order, its card is placed face up. When the players have given orders to all their units, the turn moves on to the next phase.
Phase 2: Recovery tests
Units that were in the state Suppressive Fire in the previous turn must pass a Stamina Test. If the Stamina Test is passed, the unit acts normally and may carry out the order it received. If the Stamina Test is not passed, the unit remains in the state Suppressive Fire for the whole turn and must take the Recovery Test again in Phase 2 of the next turn.
Phase 3: Radio interception
A unit may intercept the orders assigned to enemy units. To do so, roll one die for each enemy unit that is located in the listening zone assigned by the order. For each enemy unit in the listening zone the interception test is taken separately. For the test to be passed, the value rolled on the die must not exceed the value given for the chosen listening range.
Example. For a listening zone three hexes in range, the value 2 is given. The interception test is considered passed if 1 or 2 is rolled on the die. On a 3, 4, 5 or 6 the test is considered failed.
If the radio interception test is failed, the turn immediately moves on to the next phase, Execution of orders. If the radio interception test is passed, the opponent must turn over the card of the unit whose order was intercepted, to show the order given to it.
Coordination with headquarters
A player may change the orders given to any of their units (no more than six). To determine how many units may have their orders changed, roll one die. The value rolled corresponds to the number of units whose orders may be changed.
The headquarters must be in play and must not be in the state Close Combat or Suppressive Fire.
After coordination with headquarters has been carried out, the turn moves on to the next phase, Execution of orders.
Phase 4: Execution of orders
Players must turn over the cards of all their units to their reverse side, so that the opponents can see each other's orders. After this, no order may be cancelled or replaced by another. Orders are carried out by the players in strict sequence, according to the order of execution of the order types.
Orders of one type are carried out simultaneously. When orders of one type are carried out, the players perform the necessary actions one after another, but in the game situation these actions are considered simultaneous.
Interrupting the execution of a prolonged order. If a unit is executing a prolonged order, one that takes more than one turn to complete, the player may interrupt that order. At the start of the turn, instead of the mark for continuing the order, the player may give a new order. Marks in the interrupted order are not erased. At any turn, the player may resume the interrupted order.
Order of execution of orders:
- Defence order
- Suppressive Fire order
- Fire order
- Aviation actions
- Attack order
- Ambush order
- Special orders
- Movement orders
At the end of the turn, make a mark on the turn card to record the completion of the turn.
General Rules
Stamina Test
If, at the moment the Stamina Test is taken, the unit is inside the command zone of a Headquarters, its Stamina value is increased as shown on the Headquarters card (see Raising Morale, page 35).
The Stamina Test is taken immediately if:
- the unit was the target of a Suppressive Fire order;
- the unit received damage;
- a unit with the property "Fear of tanks" became the target of an Attack order by Light, Medium or Heavy tank units;
- the unit became the target of an aviation unit;
- the unit became the target of an Attack order and was attacked from the flank or rear;
- the unit became the target of a Powerful attack order, for example by Soviet naval infantry or cavalry units;
- the unit became the target of a unit with the "Sniper" property;
- the unit takes a Recovery Test.
To take a Stamina Test, roll two dice. For the test to be passed, the sum of the values rolled must not exceed the unit's Stamina value at the moment the test is taken.
For each damage received, the unit's Stamina decreases as shown in its Stamina table.
Record the new Stamina value in the corresponding box.
When a Stamina Test is taken, the unit's Stamina value is taken with account of the damage it has received.
Suppressive Fire state
If the Stamina Test is failed, the unit enters the state Suppressive Fire.
- A mark is made in the Suppressive Fire box in the unit's status section on the front of the card.
- All orders that have not yet been carried out this turn are cancelled.
- The unit can only return fire in Close Combat. Its accuracy in return fire is the value given in the Suppressive Fire box of the card.
- The unit's sight range is 1 hex.
- The unit does not receive the additional Defense from terrain.
- If an infantry unit was in a trench, it is no longer considered to be in a trench. The mark in the "In trench" status box must be erased.
- If a Light, Medium or Heavy tank unit was in a tank trench, it continues to be in it and continues to receive the additional protection from the trench.
After a unit has entered the state Suppressive Fire, in the next turn it must receive an order in Phase 1 like the other units, but in Phase 2 ("Recovery tests") it must pass a repeat Stamina Test. If the repeat Stamina Test is passed, the unit ceases to be in the state Suppressive Fire and may carry out the order it received. If the repeat Stamina Test is failed, the unit remains in Suppressive Fire and cannot carry out the order it received. In the next turn the unit must again receive an order in Phase 1, and after that again attempt to pass the Stamina Test in Phase 2.
Line of Sight
The game uses the concept of a Line of sight. This is a line drawn mentally between the centre of the hex on which the player's unit stands and the centre of the hex on which its target stands. For the target to be visible, there must be no hexes on this line with terrain that forms a barrier to line of sight. Which terrain types are barriers to line of sight is stated in the terrain descriptions (pages 39–43). Players' own units and enemy units are not barriers to line of sight. When determining line of sight it is recommended to use a thread stretched between the centres of the hexes.
A diagram in the original shows "No line of sight" and "Line of sight present".
The line of sight for all unit types is no more than 6 hexes. A target that is more than 6 hexes away is considered invisible to the unit.
Units with the property Concealed state have a sight range of 8 hexes.
Units standing on a hill have their line of sight increased by +1 for each level of height (see Hill, page 43), but by no more than 2 hexes, even for 3 or more levels of height.
Units in the state Suppressive Fire have a sight range of 1 hex. Units in Close Combat have a sight range of 1 hex (see Close Combat, page 14).
Fire Test
- Determine the current Defense value of the target (the sum of its base Defense, the additional Defense from terrain, engineering structures and the order the target is carrying out). Record the current Defense value on the target's card.
- Determine the line of sight and the distance to the target.
- Determine the type of the target.
- Using the Fire intensity scale, determine the number of dice to roll, according to the strength of the firing unit.
- Roll the dice.
- Compare the values rolled with the firing unit's accuracy for the given distance to the target.
- Remove the dice whose values exceed the firing unit's accuracy at that distance.
- The dice with the remaining values count as hits.
- Remove a number of hits equal to the target's current Defense value. Record the target's new Defense value on its card.
- The remaining hits count as damage.
- For each damage received, one unit of the target's strength is removed. One strength symbol must be crossed out. If several units fire at one target, all their hits are added together.
Group
If several of a player's units stand on the same hex, for convenience of placement on the game board they may be designated as a Group. A player may remove from the game board the units that stand on one hex and place them on their cards instead.
Instead of the units, the player places a Group flag on the game board. On the Group card the player must write all the numbers of the units that were removed and designated as a group.
A Group has only one purpose: convenience of placing units on the board. A Group cannot be designated as a target. Each unit in a Group receives and carries out its order independently of the other units in the group.
The Group card is divided into categories:
- Heavy category (armoured vehicles, transport, and tanks): numbers of up to 3 units.
- Light category (infantry and artillery): numbers of up to 6 units.
If an enemy unit carries out an Attack order on one of the player's units that is in a Group, then all the units of the Group take part in the Close Combat. Units in a Group take part in one Close Combat not because they are a Group, but because they stand on the same hex. The enemy must inflict damage only on the unit named in its order, while in return all the units of the Group will inflict damage on it.
Only one Group may be on one hex. If a hex already holds the maximum number of units of one category that may be in a Group, then another unit of the same category may neither stop on that hex nor move through it.
Example. On one hex there are 3 armoured vehicle units and 4 infantry units. The player wants to move 1 more armoured vehicle unit and 1 more infantry unit onto this hex. Since the hex already holds the maximum number of units of the heavy category, the armoured vehicle unit cannot move onto it and stops its movement on the neighbouring hex. The infantry unit moves freely, because it does not exceed the maximum number of units of its category.
Fire at a group of units
If on one hex there are three or more enemy units of one category, including units in Ambush, then because of the dense grouping of units, not only the unit that is the target of the fire but also the other units of the same type come under fire.
- Carry out a Fire Test against the unit that is the target of the order.
- Half of the dice whose values exceeded the firing unit's accuracy, rounded up, are used instead of the Fire intensity when firing at the next unit.
- Carry out a Fire Test.
- As in the first case, half of the dice whose values exceeded the firing unit's accuracy, rounded up, are used instead of the Fire intensity when firing at the next unit.
Fire at a group of units continues until all units of the same type as the target have been fired upon, or until the player has no dice left whose values exceeded the accuracy.
If a player rolls one die for one of their units, then whatever the result, this roll is the last for that unit when firing at enemy units on one hex.
Firing sector
For all units that have a firing sector, the sector differs only in firing range.
These units may fire at an enemy unit only if it falls within the firing sector. In other directions these units cannot fire.
Flanks and rear
A firing sector can point only towards one of the sides of the hex. All other sides of the hex are considered the flanks and rear of the unit. A unit that does not have a firing sector also has no flanks and rear.
If a unit was designated as the target of an Attack on flank or rear order, then before Close Combat is carried out, this unit must pass a Stamina Test. If the unit does not pass the Stamina Test, it must immediately enter the state Suppressive Fire. In Close Combat the value of its accuracy is used, as stated on the card in the Suppressive Fire status box. When a unit is attacked on the flank or rear, the additional Defense from a trench is not taken into account.
If on one hex with a unit that has flanks there is a unit that does not have flanks and rear, then the flanks and rear are considered covered, and no Stamina Test need be taken when attacking that hex.
Strong Wind
The game may be played according to the scenario or by agreement of the players using the Strong Wind rule. Strong wind is one of the weather conditions for a battle. Rules for other weather conditions will appear later, with the release of new unit types.
If a battle is played using the Strong Wind rule, the wind direction must be determined before the start of the game.
Determining the wind direction:
- Choose any hex on the game board.
- Place a die showing 1 on one side of the hex.
- Place dice showing 2 to 6, in order, on the remaining sides of the hex, clockwise.
- Roll a die.
- The value rolled indicates the direction of the wind from the chosen hex (step 1).
The chosen wind direction applies until the end of the game and is used as necessary when carrying out some orders, for example: Landing; Air supply of ground troops; Arson; Smoke screen. The specific cases in which the wind direction is used are stated in the individual orders.
To indicate the wind direction, the numbers of the hexes showing the wind direction may be written on the turn card.
Calm. By the scenario's conditions, the game may be played under the "Calm" rule. In this case there is no strong wind and smoke will not spread.
River current
According to the scenario, or by agreement of the players, a river current must be assigned.
To indicate the river current, write the numbers of the hexes showing the direction in the "River" box of the Turn card.
Water units moving with the river current have their movement range increased by 1 hex. When moving against the river current, their movement range is decreased by one hex.
Collision
If, when carrying out any movement orders, the movement routes of enemy units cross, the units must stop on hexes adjacent to the hex where the routes cross. The rule of unit movement "hex by hex" must be taken into account.
If the movement routes of units are directed towards each other, the units must stop on adjacent hexes.
If the final hexes of enemy units' movement routes coincide, then to determine which unit moves onto that hex, each player must roll one die for each of their units. To each value rolled, add the unit's current Stamina value. The player whose result is higher continues carrying out the order with their unit and moves it onto the specified hex.
If a player has several units moving onto the same hex as the enemy's units, a die roll is made for each unit.
Only those units whose value is greater than the opponent's move onto the specified hex. Units whose values are lower than the opponent's stop the movement order on the neighbouring hex.
If the values are equal, the enemy units remain on neighbouring hexes. The rule of unit movement "hex by hex" must be taken into account.
Example. Two Soviet Army units and three Wehrmacht units have the same final hex in their movement routes. All the units must roll one die each and compare the results with their Stamina added. The Soviet units' values, with Stamina added, come to 5+7=12 and 3+7=10. The Wehrmacht units' values come to 2+8=10; 3+5=8 and 4+7=11. Only one Soviet unit, with the value 12, moves onto the final hex. The Soviet unit with value 10 does not move onto the hex, because the enemy has a unit with value 11. All the Wehrmacht units have values lower than the Soviet unit's, so none of their units moves onto the final hex of the route.
Transport
Transport units that carry infantry, tow artillery or carry ammunition may be loaded with no more than they can carry according to their strength. Each strength unit of the transported units occupies one strength unit of the transport unit. Six units of ammunition also occupy one strength unit of the transport unit. One unit of mines or explosives counts as two units of ammunition.
Infantry Cover
If an infantry unit and an armoured vehicle, Light, Medium or Heavy tank unit carry out a Defence order on the same hex (the units must carry out the same order and be directed towards the same hex), the infantry unit receives +1 Defense and +1 Stamina.
If an infantry unit and an armoured vehicle, Light, Medium or Heavy tank unit carry out an Attack or Combat movement order and their movement routes that turn fully coincide, the infantry unit receives +1 Defense and +1 Stamina.
Close Combat
One unit of ammunition is spent by all units taking part in Close Combat.
Units in Close Combat may be the target of an Attack order.
Infantry units that are in a transport unit disembark when the transport unit is attacked, if the transport unit does not enter the state Suppressive Fire after the attack. The infantry unit's model must be placed on the game board, on the hex where the transport unit was attacked. A disembarked infantry unit is also considered engaged in combat and must take part in Close Combat in the next turn.
Close Combat does not take place between ground units and aviation units. However, they may fire at each other if the aviation unit is on a hex with a ground unit. In this case the units are not considered to be in Close Combat. Aviation and ground units may carry out any order; a "withdrawal from combat" is not required.
If at the end of a turn enemy units remain on one hex, then all the units taking part in that Close Combat may not receive new orders in the next turn, except the order to withdraw from combat, and must continue the Close Combat. In this case the units are considered engaged in combat. Instead of giving an order, each unit must write in the card's Attack order box the number of the enemy unit that will be attacked. Units in Close Combat have a line of sight of 1 hex.
Withdrawal from Close Combat
Units may withdraw from Close Combat. The unit must receive a Movement order. A unit may withdraw only onto an adjacent hex (the number of the hex must be stated in the movement route). A unit cannot withdraw onto a hex occupied by the enemy or onto a hex where Close Combat is also taking place. Hits by the enemy on a unit that is withdrawing from Close Combat are applied as normal. A unit that is withdrawing from Close Combat does not fire at the enemy and does not spend ammunition.
Withdrawal from Close Combat takes place simultaneously with the execution of other movement orders. If damage was received during withdrawal and the Stamina Test was not passed, the unit does not move onto the adjacent hex and immediately enters the state Suppressive Fire.
Lack of ammunition
If a unit in Close Combat has no ammunition at all at the start of the turn, that unit must receive an order to withdraw from combat. If the unit has no possibility of withdrawing from combat, for example because it is completely surrounded by enemy units or by impassable terrain, the unit is considered captured. The unit's model is removed from the game board. A withdrawing unit cannot be captured if in this Close Combat there is another friendly unit with at least one unit of ammunition.
Forced withdrawal from combat
If a unit that is in the state Suppressive Fire becomes the target of an Attack order, then after the attacking enemy has fired, regardless of its results, the unit must leave Close Combat (according to the rules for "Withdrawal from Close Combat") and withdraw onto an adjacent hex in the direction opposite to the attack by the enemy unit. If withdrawal onto the hex opposite the direction of the attack is impossible, the unit must withdraw onto either of the two hexes adjacent to it. If withdrawal onto all three hexes is impossible, the unit surrenders.
Historical note: birth of the Soviet Guards
The Soviet Guards appeared on 18 September 1941. After the fighting at Yelnya, by decision of the Stavka of the Supreme High Command (No. 308), four Soviet rifle divisions were awarded the honorary title of "Guards".
The 100th Rifle Division became the 1st Guards Rifle Division; it had taken part in the successful assault on the Mannerheim Line during the Soviet–Finnish War of 1940, and in 1941 fought for a month in defensive battles in the Minsk area.
The 127th Rifle Division became the 2nd Guards Rifle Division. Within the 19th Army of the Reserve Front of the Supreme High Command, the division took part in the Smolensk battle. Following the results of the fighting on the Taman Peninsula on 9 October 1943, the division received the name "Taman", by which it is known today.
The 153rd Rifle Division became the 3rd Guards Rifle Division. In July 1941, within the 19th Army of the Reserve Front of the Supreme High Command, the division fought stubborn defensive battles in the Vitebsk area.
The 161st Rifle Division became the 4th Guards Rifle Division; it took part in the defence of Minsk jointly with the 100th Rifle Division.
The first Guards tank formation was the 4th Tank Brigade, converted by People's Commissariat of Defence Order No. 337 of 11 November 1941 into the 1st Guards Tank Brigade; in October–November 1941 it fought stubborn battles against superior enemy forces in the Orel–Mtsensk area.
From May 1942 a breast badge "Guards" was instituted for the personnel of the Guards units.
Orders
Legend of order symbols
Each order is shown on the reverse of the unit card by a symbol. The symbols carry the following information:
- Sequence. This symbol shows at which point in the order of execution of orders the particular order is carried out.
- Target. Depending on the order, the player must state either the number of an enemy unit, the number of a hex, the range of the area of effect, or the number of a friendly unit.
- Duration of the order. The figure in the symbol shows how many turns the order must be carried out.
- Increase in the number of dice when firing. When the order Suppressive Fire is carried out, half of the Fire intensity value for the same target type at which the Suppressive Fire is directed must be added to the unit's Fire intensity, rounded up. For example, if a normal shot requires rolling 9 dice, then a Suppressive Fire shot (an order with this symbol) requires rolling 14 dice.
- Direction. The number of an adjacent hex must be written to show the direction the unit will face when the order is carried out.
- Unit strength. The figure in the symbol shows the minimum strength the unit needs to carry out the order.
- Change in Defense. When the order is carried out, the unit's Defense increases or decreases as shown in the symbol.
- Movement range. The figure in the symbol shows the maximum number of hexes the unit may move.
- Unit position. The number of the hex on which the unit stands must be written.
1. Defence
Firing is carried out only once per turn.
The fire zone of the unit must be at least 1 hex. The fire zone cannot have a range of 0.
A unit must begin firing at the enemy if, within its fire zone and in its line of sight, the enemy carries out any Movement order (except the Wait order) or an Attack order, even if the enemy unit is only beginning its movement from a hex that lies within the fire zone.
If several enemy units in the fire zone carry out Movement orders, the player whose unit is on Defence chooses which enemy unit to fire at.
If the enemy has suffered losses, it must take a Stamina Test. If the test is passed, the enemy unit must continue carrying out its order. If the enemy unit does not pass the Stamina Test, it immediately enters the state Suppressive Fire and cannot continue carrying out its order.
A unit on Defence has a firing sector, flanks and rear.
- Sequence. The order Defence is carried out first.
- Change in Defense. The unit's Defense is increased by +1.
- Fire zone. The range of the fire zone must be stated (in hexes). The range of the fire zone cannot be less than 1 hex and cannot exceed the unit's maximum firing range.
- Direction. The number of an adjacent hex must be written to show the direction the unit faces when the order is carried out.
2. Suppressive Fire
The order may be given only if the enemy is in line of sight and within firing range.
After firing, the enemy unit must take a Stamina Test, even if it received no damage.
If the enemy, after being fired on with Suppressive Fire, does not pass the Stamina Test, it cannot carry out the order it was given in this turn, except the order Suppressive Fire.
Units with the property Area fire may direct Suppressive Fire at hexes on which no enemy units are visible, for example a unit in Ambush.
Suppressive Fire by all units takes place simultaneously. Losses are removed from the game only after all Suppressive Fire orders of all players have been carried out.
- Sequence. The order Suppressive Fire is carried out second, after the order Defence.
- Increase in the number of dice when firing. See the legend above. For example, a normal shot requiring 9 dice becomes 14 dice when fired as Suppressive Fire.
- Target. State the number of the enemy unit to be fired upon.
3. Fire
The order may be given only if the enemy is in line of sight and within firing range.
Fire by all units takes place simultaneously. Losses are removed from the game only after all Fire orders of all players have been carried out.
- Sequence. The order Fire is carried out third, after the order Suppressive Fire.
- Target. State the number of the enemy unit to be fired upon.
3. Smoke screen
A smoke screen is a barrier to line of sight.
- Sequence. The order Smoke screen is carried out third, after the order Suppressive Fire.
- Target. State the number of the hex on which the smoke screen will be placed.
The order may be given only if the hex lies in line of sight and within firing range of the unit carrying out the order, or of another friendly unit.
When the order is carried out, a Smoke model is placed on the stated hex.
All units that find themselves on a hex with a smoke screen cannot receive or carry out the orders Attack, Ambush, Special orders and Movement orders that were given in this turn.
A movement route cannot pass through a hex on which a smoke screen has been placed. If units have already been assigned a movement route, they must interrupt the movement order on the hex adjacent to the smoke screen. A unit on a hex with a smoke screen is considered invisible and cannot be designated as the target of orders.
If the game is played with the Strong Wind rule (see Strong Wind, page 12), the smoke screen spreads in the direction of the wind according to the following rule:
- Turn 1: the smoke screen is on the hex at which the shot was fired (a Smoke model must be placed).
- Turn 2: at the start of the turn, a new smoke screen appears on the adjacent hex in the direction of the wind (the second hex) (a Smoke model must be placed).
- Turn 3: at the start of the turn, a new smoke screen appears on the adjacent hex in the direction of the wind (the third hex) (a Smoke model must be placed).
- Turn 4: the smoke screen is removed from the game from all three hexes before the start of the turn.
If the game is played without the Strong Wind rule, the smoke screen is removed from the game board at the end of the third turn after the shot.
3. Artillery fire adjustment
A selected artillery unit may re-roll, once per turn, the dice on which unsuccessful values came up when carrying out the order Fire.
- Sequence. The order Artillery fire adjustment is carried out third, simultaneously with the order Fire.
- Target. State the number of the friendly unit for which fire adjustment will be carried out.
The target of the artillery unit must be in the line of sight of the unit for which it carries out the fire adjustment.
Fire adjustment does not apply to anti-aircraft artillery firing at aviation units. For anti-aircraft artillery firing at ground targets, fire adjustment applies as normal.
Fire adjustment is possible only for one target stated in the order of the artillery unit.
Fire adjustment is not possible when the artillery unit is carrying out the order Suppressive Fire.
Fire adjustment is possible only for one artillery unit and only for one target.
4. Aviation actions
Aviation at the start of the game
At the start of the game all aviation units are off the game board, on their cards. All aviation unit cards are considered a single airfield, where each aviation unit's card is its parking place on the airfield. Airfield cards will appear in later expansions to the game. At the start of the game all aviation units are in the state of readiness for take-off, unless the scenario states otherwise.
Airfield and preparation for take-off
On the reverse of an aviation unit's card there are boxes for the state of the unit's take-off preparation, marked with the Roman numerals I, II, III and IV. The reverse of the card also carries the symbols of the orders the aviation unit may carry out. An aviation unit cannot carry out under any circumstances an order whose symbol is not shown on the reverse of its card.
In the turn in which an aviation unit must return to its airfield, its model is removed from the game board and placed on its card. In the same turn a mark must be made on the unit's card in the box Landing (I).
Each following turn, a mark must be made on the reverse of the unit's card in the state of take-off preparation. No more than one mark may be made per turn, and in the sequence shown on the unit's card. The last mark is made in the box Readiness for take-off.
Merging damaged units
Several incomplete identical units may be merged into one unit. Only units that have identical cards may be merged. The total strength of the units to be merged must not exceed the strength of one complete unit. No special order is required for merging.
Take-off
A take-off order may be given only if:
- the aviation unit is in the state Readiness for take-off;
- the player's headquarters is on the game board. The headquarters must not be in Close Combat and must not be in the state Suppressive Fire.
A mark must be made in the unit's status box for Take-off. At the start of the Execution of orders phase the unit is placed on the edge of the game board, on any of the empty hexes in the take-off zone.
The unit's card is placed face up next to the board.
A take-off order given cannot be changed or cancelled and must be carried out in the following turn.
In the following turn, the player must draw, mentally, a straight line from the centre of the empty hex on which the aviation unit stands to the centre of the hex on which the target of the sortie stands, or to the centre of the hex which is itself the target of the sortie.
Flight route
The straight line drawn from the centre of the hex of departure is called the Flight route.
If the Flight route passes through the fire zone of an enemy anti-aircraft artillery unit that is on Defence or in Ambush, the enemy must carry out fire at the aviation unit. Anti-aircraft fire is carried out at the far boundary of the fire zone.
If the anti-aircraft artillery, or the hex on which it stands, is the target of the sortie, then the aviation unit is fired upon in its fire zone at the far boundary and on the hex where the artillery stands. Thus, if an aviation unit attacks anti-aircraft artillery that is carrying out the order Defence, it will be fired upon twice in one turn. In this case the anti-aircraft artillery spends 2 units of ammunition.
If the Flight route does not pass through a hex that is part of the fire zone or the patrol zone, but only along its side, it is considered that the Flight route nevertheless passes through the fire zone or patrol zone.
Diagram in the original: "Flight route passes through the fire zone" and "Flight route passes outside the fire zone".
If an aviation unit has suffered losses, then for that unit to continue carrying out its order, the player must pass a Stamina Test for that unit (page 10). If the Stamina Test is not passed, the player's aviation unit interrupts the execution of its order and immediately returns to the airfield, regardless of the Flight route.
After an aviation unit has carried out its order, it remains on the game board until the next turn. In the next turn, at the end of the aviation phase, the aviation unit must return to the airfield, regardless of the flight route.
Orders for aviation
Bombing
The target of the order must be visible to one of the friendly units.
The target of the order may be a hex on which there are no visible enemy units.
If the target of the order was designated as a hex, the aviation unit flies along the Flight route to the stated hex. All units and engineering structures on the hex are considered attacked.
If the target of the order was designated as an enemy unit, the aviation unit flies along the Flight route to the hex on which its target stands. If the target has moved, it will be attacked on the other hex. If the target has entered Close Combat, all units on the hex, including friendly ones, will be attacked.
Attacked are not only the unit designated as the target of the sortie, but also all other units and engineering structures on the same hex. Even if none of the units has suffered losses, all units on the attacked hex must pass a Stamina Test.
- Mark of the order given. A mark is made in the box for the order given to the unit.
- Number of the hex or enemy unit to be attacked. The number of the hex or of the enemy unit to be attacked is written.
Return fire
Return fire against aviation units may be carried out only by units that are the target of the bombing (strafing) or that stand on the target hex of the bombing (strafing).
For return fire, these units may carry out any order, except units with the property Firing sector that are in the folded state.
Aviation units and ground units that carry out return fire inflict hits simultaneously. Losses are removed after all units have carried out their hit tests.
Interception
Air combat lasts until victory or defeat, but no more than the permitted number of turns in air combat for each aviation unit. (The air combat rules are given under "Air combat" below.)
- Marks of the duration of stay in air combat.
- Number of the enemy aviation unit being attacked.
Air reconnaissance
The target of the order need not be in the line of sight of a friendly unit.
When the order is given, a mark is made for the issuing of this order, the number of the hex that is the centre of the reconnaissance zone is stated, the radius of the reconnaissance zone is stated, and the duration of the reconnaissance flight is stated.
The order Air reconnaissance may be given for two purposes:
-
Reconnaissance of concealed enemy targets (those in the state Ambush or in the concealed state). Each turn, in the aviation action phase, the player takes a reconnaissance test: a die is rolled to determine whether the air reconnaissance succeeds. The maximum values, for different radii, at which the reconnaissance counts as successful, are given in the table next to the order's symbol. If the reconnaissance test is passed, the opponent must place on the game board the units that were in the state Ambush. Units that were in the concealed state are considered detected. When reconnoitring concealed targets, an automatic survey of the terrain is carried out. The range of the terrain survey zone is stated in the order's box.
-
Terrain survey. Enemy units that are outside the line of sight of the player's ground units, but within the survey zone of the aviation (stated on the aviation unit's card), may be designated as targets for units with the property Fire at covered positions, provided a headquarters is on the game board that is not in the state Suppressive Fire or in Close Combat.
- Mark of the duration of the reconnaissance flight.
- Reconnaissance zone: number of the centre hex; radius of the reconnaissance zone.
- Maximum value on the die for the reconnaissance to succeed.
- Duration of the reconnaissance flight.
Patrol
The target of the order need not be in the line of sight of a friendly unit.
In the Target of the sortie box, the number of the hex around which the patrol will be carried out is written. The order box states the maximum distance that may be designated for the patrol.
In the order box the player must state the range of the Patrol zone and the duration of the patrol. For the Patrol zone the player must state a distance in hexes that does not exceed the distance stated in the order box. The duration of the patrol is chosen by the player, but no longer than the duration stated in the order box. The order is carried out over several turns, as stated on the unit's card.
- Mark of the duration of the patrol.
- Mark of receipt of the order.
- Number of the hex – centre of the patrol zone.
- Radius of the patrol zone.
- Duration of the patrol.
- Maximum radius of the patrol zone.
Escort of a friendly aviation unit
The escorting fighter unit follows the same route as the aviation unit it escorts.
If the escorted unit enters the fire zone of an enemy anti-aircraft artillery unit that is on Defence or in Ambush, both the escort fighter and the escorted aviation unit come under fire, and the anti-aircraft artillery spends one unit of ammunition.
If the escorted unit must enter air combat, the escort fighter takes part in the combat instead of it. The escorted unit may evade air combat and continue carrying out its order, but only if all enemy aviation units are engaged in combat with the escort fighters.
The flight duration of the escort fighter must not be greater than the flight duration of the escorted unit. When the maximum flight duration is reached, the escort fighter must return to the airfield at the end of the aviation-action phase of the turn in which the maximum flight duration was reached.
- Mark of the duration of flight.
- Number of the escorted aviation unit.
- Mark of the order given.
Airborne landing
The target of the order need not be in the line of sight of a friendly unit.
Units that have the property Airborne landing on their card may be landed. Aviation units that have the Airborne landing orders may carry out a landing.
An airborne landing is carried out over several turns.
Turn 1: Take-off
Aviation unit: a transport aviation unit must be in the state Readiness for take-off. In the order Airborne landing, the number of the landing unit and the number of the hex where the landing will be made are stated. A mark is made in the status box for Take-off. The aviation unit's model is placed on an incomplete hex on the edge of the game board in the take-off zone.
Landing unit: in the state box of the landing unit, a mark must be made in the box "boarding the aircraft". The unit's model must be off the game board, on its card. If the strength of the landing unit is greater than the strength of the air transport (for example, if the air transport suffered losses in strength on a previous sortie), then when loading into the transport the strength of the landing unit is reduced to the strength of the transport unit. On the landing unit's card, the surplus strength units must be crossed out.
Turn 2: Landing
If on the way to the landing hex the aviation unit receives damage, the landing unit must lose the same number of strength units as the transport unit.
Aviation unit: the unit carries out a take-off to the stated hex (see Take-off, page 17).
Landing unit: if the game is played with the Strong Wind rule (see Strong Wind, page 12), then on landing the unit must pass a Drift test. To pass the test, roll one die.
- On a result of 1, 2 or 3, the unit is displaced 1, 2 or 3 hexes respectively in the direction of the wind, relative to the hex stated in the order.
- On a result of 4, 5 or 6, the unit lands on the stated hex.
If, during the drift test, the landing unit is displaced beyond the edge of the game board, the unit is considered destroyed (lost, scattered, or engaged in looting).
If the game is played without the Strong Wind rule, no drift test is taken, and the unit lands on the stated hex.
The landing unit's model is placed on the game board. The mark in the box "Boarding the aircraft" must be erased.
If the landing unit lands on a hex with difficult terrain, it must pass a Landing test.
Landing test
The Landing test is taken in the Aviation take-off phase.
When landing, the terrain (see pages 39–43) is considered in three types:
- Light: Plain; Scrub; Ploughed field. No Landing test is required for the unit.
- Medium: Light woodland; Village; City; Ravine; Ford; Stones. Roll one die. On a result of 1, the unit loses one strength unit. The unit's Defense is not taken into account. No Stamina Test is required.
- Heavy: Forest; Swamp; River; Lake. Heavy terrain also includes these engineering structures: Bridge; Destroyed bridge; Pontoon bridge; Railway bridge; Destroyed railway bridge. Roll one die. On a result of 1 or 2, the unit loses one or two strength units respectively. The unit's Defense is not taken into account. No Stamina Test is required.
When landing on the hexes River, Swamp or Lake, the unit, after it has carried out Equipping, may on the next turn receive only the Combat movement order.
Landing on a hex occupied by the enemy. If a unit lands on a hex on which an enemy stands, Close Combat takes place between the units in that turn, in the Attack order phase. The Defense and Fire intensity of the landed unit are used at half values, rounded up. In the next turn the unit must carry out Equipping (if its card lists the property Equipping), even if it continues the Close Combat. When carrying out Equipping in Close Combat, the unit may make attacks at half values of Fire intensity and Defense.
Turn 3: Equipping
Aviation unit: at the end of the aviation take-off phase the unit must return to the airfield, regardless of the movement route. A mark is made on the unit's card in the box Landing.
Landing unit (if the unit's card has an Equipping box in its status): a mark must be made in the status box Equipping on the landing unit's card.
In this turn no order may be given to the unit. During the turn, while the unit is in the state Equipping, its Defense and Fire intensity are used at half values, rounded up.
Example. A unit has Defense 2 and Fire intensity 8 when firing at full-strength infantry. After landing the unit is in the state Equipping for the turn. If during that turn the unit is fired upon or attacked by the enemy, its Defense will be 1, and its Fire intensity in Close Combat 4. In the next turn the unit ceases to be in the state Equipping, and its Defense and Fire intensity are used as stated on its card.
If the landing unit's card has no Equipping box in its status, an order may be given to that unit at the start of the turn as normal. Its Defense and Fire intensity are used as stated on the card.
Supply to ground troops by air
- Mark of the order given.
- Number of the hex on which the supply drop will be made.
The target of the order must be in the line of sight of a friendly unit.
Supply is provided in the game at the end of the aviation take-off phase.
If the game is played with the Strong Wind rule, a drift test must be passed when dropping supplies. To pass the test, roll one die.
- On a result of 1, 2 or 3, the supply landing zone is displaced 1, 2 or 3 hexes respectively in the direction of the wind.
- On a result of 4, 5 or 6, the supply drop takes place on the stated hex.
If the supply drop lands on one of the hexes with terrain: Swamp; River; Stones; Bridge; Ford or Lake, the supply load is considered completely destroyed.
If, during the drift test, the supply is displaced beyond the edge of the game board, the load (the depot) is considered destroyed.
If the game is played without the Strong Wind rule, no drift test is taken, and the supply drop takes place on the stated hex.
After the drop, the number of the hex where the drop took place, and where the depot will be located, must be written on the depot card. The depot card must be placed on the table so that it is visible to all players. The rules for using a depot are given on page 36.
Air combat
Air combat takes place at the end of the aviation take-off phase, before the aviation units must return to their airfield.
If an aviation unit was forced to take part in air combat, it interrupts the execution of the order given to it.
Air combat takes place:
- When the order Interception is carried out. The unit that received the order and the enemy unit stated as the target of the Interception order take part in the air combat. The air combat takes place on the hex where the target of the sortie stood.
- When the flight routes of enemy aviation units cross. All units whose flight routes crossed take part in the air combat. If one of the units has escort fighters, it may, at the player's choice, not take part in this air combat, but only if all enemy aviation units have become engaged in combat. The air combat takes place on the hex on which the flight routes crossed.
- When a flight route passes through the patrol zone of an enemy unit, or when a patrol zone passes through an enemy patrol zone. The air combat takes place on the far hex of the enemy unit's patrol zone. If more than two aviation units take part in an air combat, it is recommended, for the players' convenience, to remove the aviation unit models from the board and to place a small piece of paper marked "Air combat" on the hex where the air combat takes place. Air combats take place after anti-aircraft artillery fire has been carried out by both players.
Rules of air combat
- Fire by all units is carried out simultaneously. Losses are counted after all units have carried out their Fire tests.
- The Fire test is carried out by the general rules, but without taking into account the firing range and line of sight (see page 11).
- Each unit in an air combat must designate fire at an enemy unit. A unit that has already designated fire, and its target, are considered engaged in combat. Fire cannot be designated at an enemy unit that is already engaged in combat with one of the units, for as long as the enemy still has units not engaged in combat. That is, two or more of the player's units may designate fire at one enemy unit only when the enemy has no units left that are not engaged in combat.
- Fire is designated by both players in turn, in descending order of the Stamina values of all the units taking part in the air combat. If Stamina values are equal, the right of choice is decided by a die roll.
- A Stamina Test is taken when damage is received, but without the additional value, if the units are in the command zone of a headquarters. If a unit does not pass the Stamina Test, at the end of the aviation take-off phase, after all air combats have been carried out, it returns to the airfield, regardless of the flight route.
- If at the end of a turn enemy units remain in an air combat, all units remain in the state of Air combat for the next turn. A mark must be made in the appropriate box on the units' cards. Fire by both players is designated anew (see point 4).
- Marks of the duration of the Air combat.
- Mark of the state of the Air combat.
- Number of the enemy unit.
- Number of the hex on which the Air combat takes place.
The total duration of the Air combat plus the duration of the flight preceding the Air combat (patrol, escort, reconnaissance) must not exceed the flight duration stated in the characteristics of the aviation unit. When the maximum flight duration is reached, the aviation unit must leave combat and return to the airfield at the end of the turn in which it reached the maximum flight duration.
5. Attack
Close Combat is carried out using the Fire test rule.
In Close Combat, units of one type (except units in the state Suppressive Fire) have the same influence of terrain, regardless of when and from which hex they entered the Close Combat.
Counter-attack. If enemy units have been given Attack orders and must attack each other, then to determine which unit moves onto the enemy's hex, the players must each roll one die. The player who rolls the higher value moves their unit onto the enemy's hex.
- Sequence. The order Attack is carried out fifth, after aviation actions.
- Target. State the number of the enemy unit to be attacked.
- Movement range. The figure in the symbol shows the maximum number of hexes the unit may move.
5. Powerful attack
- Sequence. The order Powerful attack is carried out fifth, after aviation actions.
- It is carried out instead of the order Attack.
- Enemy infantry and artillery units must pass a Stamina Test before Close Combat.
- Target. State the number of the enemy unit to be attacked.
- Movement range. The figure in the symbol shows the maximum number of hexes the unit may move.
6. Ambush
Unit in ambush
- A unit that receives the order Ambush is removed from the game board and placed on its card, but it remains in the game. The unit is considered to be in Ambush.
- A unit may remain in Ambush for several turns, at the player's discretion, until it receives a new order or until it is detected. If the unit remains in Ambush into the next turn, no order need be given to it; the previously given order is considered in force.
- A unit in Ambush cannot be designated as the target of the orders Fire, Suppressive Fire, Attack, Bombing and Firing on the move.
- If Fire or Suppressive Fire is directed at a hex on which a unit is in Ambush by artillery units with the property Area fire (see page 17), then the unit in Ambush must take a Fire test. The Ambush is considered detected only if the unit enters the state Suppressive Fire.
- Units that have the property Firing sector may carry out the order Ambush only if they are in the deployed state.
- The accuracy of fire from Ambush is increased by +1.
- Sequence. The order Ambush is carried out sixth, after the orders Attack and Powerful attack.
- Change in Defense. The unit's Defense is increased by +1.
- Fire zone. State the range of the fire zone (in hexes). The range of the fire zone cannot exceed the unit's maximum firing range. The fire zone range of a unit in Ambush may be 0.
- Direction. The number of an adjacent hex must be written to show the direction the unit faces when the order is carried out.
- Unit position. The number of the hex on which the unit stands must be written.
- Duration of the order. The order Ambush carried out by armoured vehicle, Light, Medium or Heavy tank units takes two turns. The unit enters the state Ambush on the second turn of carrying out the order, in the phase of execution of Special orders.
Orders possible for a unit in Ambush
- Change of firing sector. The unit changes its firing sector as normal (see the order Change of firing sector, page 24), but it remains in Ambush. The range of its fire zone remains unchanged.
- Change of fire zone range. In the order Ambush a new range of the fire zone must be stated. The unit remains in Ambush.
Detection of an ambush
When detected, a unit ceases to be considered in Ambush. The unit's model is placed back from its card onto the game board, on the hex where the Ambush was set up.
A unit in Ambush may be detected in several ways:
- If an aviation unit carries out reconnaissance of concealed enemy targets when carrying out the order Air reconnaissance (see Air reconnaissance, page 18).
- If the movement route of an enemy unit passes through the hex on which the unit is in Ambush. The enemy unit interrupts its movement order on the hex where the Ambush was set up. The unit that was in Ambush and the unit that was moving enter Close Combat. Although the Ambush is considered detected, in Close Combat the unit in Ambush has additional protection, as stated in the order. If the unit in Ambush has its fire zone stated as 0, then +1 must be added to the value that must come up on the dice, as in firing from Ambush. If the enemy entered the hex on which the Ambush is set up not from the fire zone side, then for the unit in Ambush this counts as an attack on the flank (see page 12). In this case the +1 to the value on the dice is not added.
- If the hex on which the unit is in Ambush is subjected to non-aimed Area fire (see page 34), for example when BM-13 fires at a neighbouring hex, as a result of which the unit suffers losses and does not pass the Stamina Test.
- If a unit in Ambush fires at an enemy unit that is carrying out a movement order within its fire zone.
- If enemy special units carrying out the order Reconnaissance enter the reconnaissance zone.
- If a unit carrying out the order Ambush comes under Suppressive Fire by area, it takes a Fire test, but remains in Ambush. The unit will be considered detected only if it fails the Stamina Test. Area fire on a hex on which a unit is in Ambush is possible only when the order Suppressive Fire is carried out.
Firing from Ambush
When a unit fires from Ambush, +1 must be added to the value that must come up on the dice.
The unit must begin firing at the enemy if, within its fire zone, the enemy carries out any of the Movement orders (except the Wait order) or the Attack order, even if the unit is only beginning its movement from a hex that lies within the fire zone. The target must be in the line of sight of the unit in Ambush.
If several enemy units in the fire zone carry out Movement orders, the player whose unit is in Ambush chooses at their discretion which enemy unit to fire at.
If the enemy has suffered losses from fire from Ambush, it must immediately take a Stamina Test. If the test is passed, the enemy unit must continue carrying out its order. If the enemy unit does not pass the Stamina Test, it immediately enters the state Suppressive Fire and cannot continue carrying out its order (see page 11).
If the fire zone is stated as distance 0, the unit in Ambush does not fire at the enemy; it may only take part in Close Combat. The +1 to the value that must come up on the dice is added in the same way as when firing from Ambush.
7. Folding
- Sequence. The order Folding is carried out seventh, after the order Ambush.
- The possibility of moving onto an adjacent hex is available only to some units.
Units that are in the deployed position must carry out the order Folding before they receive any of the Movement orders or the order Tow.
The hex number is not erased from the card until the firing sector is changed or the unit carries out the order Folding. This is necessary to show the unit's firing sector.
After the order is carried out, the unit has flanks and rear.
7. Deployment
Units that are in the folded state must carry out the order Deployment before they receive any order other than a Movement order.
- Sequence. The order Deployment is carried out seventh, after the order Ambush.
- Direction. The number of an adjacent hex must be written to show the direction the unit faces when the order is carried out.
7. Change of firing sector
- Sequence. The order Change of firing sector is carried out seventh, after the order Ambush.
- It is possible only for units in the deployed position. The order Folding does not need to be carried out.
A unit in the deployed position that is in Ambush may carry out this order. When the order Change of firing sector is carried out, the unit in Ambush is not considered detected.
Units in the deployed position that are in a trench cannot carry out the order Change of firing sector.
- Direction. The number of an adjacent hex must be written to show the direction the unit faces when the order is carried out.
7. Gathering
Several incomplete identical units may be merged into one unit.
Only units that have identical cards may be merged.
When merging, all units to be merged must be given the order Gathering.
All the units must stand on the same hex.
The total strength of the units to be merged must not exceed the strength of one complete unit.
The ammunition of the new unit becomes equal to the ammunition of the unit with the largest number of ammunition units.
Only the model of one unit remains on the game board.
The new unit uses the card and number of one of the units that carried out the order Gathering.
When gathering, the Stamina value for the new unit must be calculated, according to its strength, and written on the card.
- Sequence. The order Gathering is carried out seventh, after the order Ambush.
7. Mining
False mining
No ammunition is spent.
A sapper unit may carry out false mining. False mining is carried out in order to conceal from the enemy the true minefield.
False mining may be carried out an unlimited number of times per game.
A detonation does not occur on a hex that has been mined with false mines.
When a hex is mined, a mark must be made on the minefield card in the box for false mines, as one of the mine types.
Minefield card: used when forming an army before the start of the game. It records the mine type (anti-personnel or anti-tank), offers a dummy (blank) marker option, and carries a box for false mines. For false mining, the number of the mined hex is stated. The mining order is carried out over 2 turns and marks are made on the card at its end.
Mining is carried out on the hex on which the sapper unit stands. The order Mining lasts 2 turns.
- Sequence. The order Mining is carried out seventh, after the order Ambush.
At the end of the last turn of mining, marks must be made on the minefield card.
Detonation on a minefield
If any unit other than a sapper unit carrying out the order Combat movement moves through a mined hex, the enemy must stop that unit's order on the hex that was mined.
After the unit has stopped on the minefield, the enemy must turn the minefield card over to its reverse side, to confirm the mining of this hex and show the mine type.
The unit is considered to have detonated the minefield and must pass a Detonation test.
The Detonation test on a minefield is carried out by the rules of the Fire test (see Fire test, page 11).
A unit that begins its movement on a mined hex, regardless of the movement order it received, moves only one hex and must pass a Detonation test.
On a hex mined by a player, both enemy units and the player's own units are detonated.
After detonation the minefield remains in the game.
Detonation on a minefield that has not been cleared may occur an unlimited number of times per game.
Ammunition is crossed out only after detonation.
Minefield card detail: the target types that may be damaged, the maximum value on the dice for a hit in the Fire test, the Fire intensity scale for each target type, and the mine type.
Historical note: the Soviet tank platoon
The tank platoon of the Soviet armoured troops was the smallest independent tactical unit. The composition of a platoon depended on the equipment: two or three tank platoons together with a command section made up a tank company. A platoon in a company of light and medium tanks consisted of five vehicles; a platoon in a company of heavy, chemical and amphibious tanks consisted of three vehicles.
In 1941 the Soviet army had on strength the light tanks BT, T-26 and T-60, medium tanks T-28 and T-34, heavy tanks T-35, KV-1 and KV-2, amphibious tanks T-37/38 and T-40, and flamethrower versions of the T-26 light tank.
Some Soviet tank formations in 1941 had mixed equipment (for example, T-34 and BT tanks within one battalion).
Until full radio equipment of the tank units had been achieved, the platoon commanders' vehicles differed from line tanks by having an on-board radio set. On early versions of the BT and T-26 tanks with whip antennas, this led to the commanders' vehicles being easily detected by the enemy in battle.
7. Mine clearance
To give the order Mine clearance, the minefield must have been detected.
A minefield may be detected without detonating on it either by a sapper unit carrying out the order Combat movement, or by a tank unit equipped with a mine roller, when carrying out a special order.
When carrying out other movement orders, a sapper unit receives damage from a minefield by the same rules as all other units.
If a sapper unit, carrying out the order Combat movement, moves through a hex that is mined by the enemy, the enemy must stop the sapper unit's order on the hex that was mined, and turn the minefield card over to its reverse side to confirm the mining of this hex and show the mine type. The minefield is considered detected.
If a sapper unit carrying out the order Combat movement passes through a hex that was mined by a friendly unit, then for the enemy the minefield is not considered detected.
After mine clearance the minefield is removed from the game.
- Sequence. The order Mine clearance is carried out seventh, after the order Ambush.
- Duration of the order. The order Mine clearance is carried out over 2 turns.
7. Demolition of structures
Structures in the game include:
- Bridges;
- Pontoon bridges;
- Pillboxes;
- Railways;
- Railway bridges;
- Ammunition depots.
To demolish a structure, the unit must stand on a hex adjacent to the hex on which the structure to be demolished is located.
On the last turn of carrying out the order, at the end of the Special orders execution phase, the structure is considered destroyed.
All units that were inside the structure at the moment of demolition are also considered destroyed and must be removed from the game.
After demolition the structure is removed from the game board or replaced by a destroyed one.
The unit that demolished the structure receives no damage.
- Sequence. The order Demolition of structures is carried out seventh, after the order Ambush.
- Duration of the order. The order Demolition of structures is carried out over 2 turns.
- One unit of explosives ammunition is spent. If the demolition is carried out by a sapper unit, one unit of mine ammunition is spent instead of explosives.
7. Removal of anti-tank obstacles
The unit must stand on the same hex as, or on a hex adjacent to, the hex with which the anti-tank obstacles share a common side.
At the end of the Special orders execution phase, the model of the anti-tank obstacle must be removed from the game board.
- Sequence. The order Removal of anti-tank obstacles is carried out seventh, after the order Ambush.
- Duration of the order. The order Removal of anti-tank obstacles is carried out over 2 turns.
7. Arson
A fire in a settlement is possible in the following cases:
- Arson by sappers or flamethrower tanks.
- Aviation bombing with incendiary bombs.
- When carrying out Close Combat with flamethrower tanks.
Arson by a sapper unit. Arson is possible only on hexes with a settlement (City, Railway station or Village). When carrying out the order, the unit must stand on the hex where the arson will be carried out.
A fire in a settlement lasts several turns, depending on the type of settlement. In the Special orders execution phase, two counters are placed on the hex: a Fire counter and a Smoke counter.
A fire in a settlement proceeds by the following rules:
Fire in a village or at a railway station (lasts 6 turns):
- Turn 1. In the Special orders execution phase a Fire counter with three fire markers is placed on the hex.
- Turn 2. The sapper unit must receive one of the Movement orders and withdraw from the hex on which the fire is burning. A Smoke counter is placed on the hex with the fire.
- Turn 3. One of the three markers is removed from the Fire counter. A Smoke counter is placed on the adjacent hex (the second) in the direction of the wind.
- Turn 4. One of the two remaining markers is removed from the Fire counter. A Smoke counter is placed on the hex adjacent to the second hex in the direction of the wind.
- Turn 5. The last marker is removed from the Fire counter.
- Turn 6. In the Special orders execution phase, the Fire counter and the three Smoke counters are removed from the game board. The settlement is considered completely destroyed.
Fire in a city (lasts 9 turns):
- Turn 1. In the Special orders execution phase a Fire counter with six fire markers is placed on the hex.
- Turn 2. The sapper unit must receive one of the Movement orders and withdraw from the hex on which the fire is burning. A Smoke counter is placed on the hex with the fire.
- Turn 3. One of the six markers is removed from the Fire counter. A Smoke counter is placed on the adjacent hex (the second) in the direction of the wind.
- Turn 4. One of the five remaining markers is removed from the Fire counter. A Smoke counter is placed on the hex adjacent to the second hex in the direction of the wind.
- Turn 5. One of the four remaining markers is removed from the Fire counter.
- Turn 6. One of the three remaining markers is removed from the Fire counter.
- Turn 7. One of the two remaining markers is removed from the Fire counter.
- Turn 8. The last marker is removed from the Fire counter.
- Turn 9. In the Special orders execution phase, the Fire counter and the three Smoke counters are removed from the game board. The settlement is considered completely destroyed.
Smoke is a barrier to line of sight. All units that find themselves on a hex with Smoke cannot receive or carry out the orders Attack, Ambush, Special orders and Movement orders that were given in that turn. A unit on a hex with smoke is considered invisible and cannot be designated as the target of orders.
A movement route cannot pass through a hex with Smoke. If units have already been assigned a movement route, they must interrupt the movement order on the hex adjacent to the Smoke.
Units cannot enter settlements in which a fire is burning.
Infantry, artillery and vehicle units that stand on a hex with a burning settlement automatically receive damage of 1 unit of strength per turn, without a casualty test. Stamina Tests are taken as normal. When a unit passes the Stamina Test, it automatically receives an order to leave the burning settlement, in the direction of the following priorities:
- to a hex where there is no fire;
- to a hex away from the enemy;
- to the nearest friendly unit;
- towards the edge of the board on the player's side.
7. Tow
Some artillery units may move across the game board by being towed by transport units.
When towing, only the transport unit receives a movement order. The unit being towed receives no orders.
Towing is possible only if the unit is in the folded state.
The unit to be towed and the transport unit must stand on the same hex, and both must receive the order Tow.
The unit being towed is removed from the game board and placed on its card.
A transport unit carrying out a tow cannot receive the order Road march.
To finish towing, the unit must receive the order Deployment.
- Sequence. The order Tow is carried out seventh, after the order Ambush.
Firing at transport and towed units. If the transport unit receives damage from fire, the towed unit must lose the same number of strength units as the transport unit.
The towed unit receives damage even if the strength of the transport unit is greater.
The Defense of the towed unit is not taken into account.
The Stamina Test after receiving damage is taken only for the transport unit, but the result of the test also applies to the towed units.
Example. A Soviet lorry with strength 5 is transporting a battery of 45 mm guns with strength 2. The motor column comes under fire and receives one damage. The strength of the motor column is reduced by 1 unit. Since the motor column received 1 damage, the battery of guns it transports also receives 1 damage. Although the 45 mm battery has Defense 1, it loses one strength unit, as the transport unit does. Although both units have suffered losses, the Stamina Test is taken only for the transport unit. The motor column fails the Stamina Test and enters the state Suppressive Fire. The 45 mm battery also enters the state Suppressive Fire and is no longer considered transported. Further Stamina Tests for each unit are taken separately.
7. Laying a bridge
A unit lays a pontoon bridge over a river.
When receiving the order, the unit must stand on a hex adjacent to the river.
In the Special orders execution phase, the unit moves onto the river hex on which the bridge will be laid.
The model of the pontoon bridge is placed on the river hex, one section per turn.
On the last turn of carrying out the order, at the end of the Special orders execution phase, the last section of the pontoon bridge is placed on the river hex. The pontoon bridge is considered fully laid.
- Sequence. The order Laying a bridge is carried out seventh, after the order Ambush.
- Duration of the order. The order Laying a bridge is carried out over 4 turns.
- Strength. This order may be carried out only by a unit of strength not less than 2.
7. Clearing a lane
A sapper unit may cut a lane through a forest for the passage of other units that cannot move through forest.
When receiving the order, the unit must stand on a forest hex in which the lane will be cut.
On the last turn of carrying out the order, at the end of the Special orders execution phase, an additional forest-clearing hex (see the terrain description, page 41) is placed on the forest hex.
- Sequence. The order Clearing a lane is carried out seventh, after the order Ambush.
- Duration of the order. The order Clearing a lane is carried out over 3 turns.
7. Receiving supplies
From a transport unit.
- Sequence. The order Receiving supplies is carried out seventh, after the order Ambush.
- Duration of the order. The order Receiving supplies is carried out over 2 turns.
To replenish ammunition, the unit must stand on the same hex as the transport unit.
The player must give the order Receiving supplies to the unit that is to receive new ammunition, and to the transport unit that is to issue the ammunition.
If during the game a unit of the player has replenished its ammunition, the player must erase from the unit's card as many marks as it decided to take from the transport unit.
On the transport unit's card the player must cross out as many ammunition units as were transferred to the unit.
The player is not obliged to take the whole of the ammunition.
A unit cannot receive more ammunition units than are stated on its card.
Several units may receive the order Receiving supplies from one transport unit at the same time, if they stand on the same hex.
From a depot. A unit may receive supplies not only from a transport unit but also from a depot.
To receive ammunition, the unit must stand on the hex where the depot is located.
The player is not obliged to load the full quantity of ammunition.
Marks from the expended ammunition are erased according to the number of ammunition units received.
A unit cannot receive more ammunition units than are stated on its card.
On the depot card the player must cross out as many ammunition units as were received by the unit.
7. Loading supplies
If a transport unit has run out of ammunition which it may pass on to other units, the player may load the transport unit again from a depot (see page 36).
To load ammunition, the transport unit must stand on the hex where the depot is located.
The player is not obliged to load the full quantity of ammunition.
- Sequence. The order Loading supplies is carried out seventh, after the order Ambush.
- Duration of the order. The order Loading supplies is carried out over 2 turns.
Marks from expended ammunition are erased according to the number of ammunition units loaded.
A unit cannot receive more ammunition units than are stated on its card.
On the depot card the player must cross out as many ammunition units as were loaded into the transport unit.
When a transport unit that is loaded with ammunition suffers losses, six ammunition units must be removed for each loss.
7. Digging in
The player may place a trench on the game board.
When receiving the order, the unit must stand on the hex on which the trench will be placed.
On the last turn of carrying out the order, at the end of the Special orders execution phase, the trench model is placed on the hex.
When the order is carried out, the unit's Defense is reduced to 0, regardless of its own Defense and the terrain.
- Sequence. The order Digging in is carried out seventh, after the order Ambush.
- Duration of the order. The order Digging in is carried out according to the figure shown on the order's symbol.
- Direction. The number of an adjacent hex must be written to show the direction in which the trench will face.
- Strength. This order may be carried out only by a unit of strength not less than 3.
7. Reconnaissance
When carrying out this order, the unit may detect enemy Ambush units that are in line of sight and within the range of the order's execution set by the player.
To give the order Reconnaissance, the player must make a mark on the order's symbol to show it has been given, and must also state the range (radius) of the order's execution.
To determine whether the reconnaissance was successful, a Reconnaissance success test is taken, for which one die is rolled. If the value rolled is less than or equal to the value corresponding to the range of the order's execution, the test is considered passed and the order Reconnaissance is successfully carried out.
If the order Reconnaissance is carried out successfully, then at the end of the Special orders execution phase, all enemy concealed units that are in line of sight and within the range of the order's execution are considered detected. The player whose units have been detected must turn over the cards of those units and put the unit models back onto the game board.
- Sequence. The order Reconnaissance is carried out seventh, after the order Ambush.
7. Railway repair
The unit repairs a railway. The unit must stand on a hex with a destroyed railway. On the last turn of carrying out the order, at the end of the Special orders execution phase, an undamaged railway in the same direction is placed in place of the destroyed railway.
- Sequence. The order Railway repair is carried out seventh, after the order Ambush.
- Duration of the order. The order Railway repair is carried out over 4 turns.
7. Treatment
A unit that is to receive additional protection must stand on the same hex as, or on a hex adjacent to, the hex on which the medics stand.
- Sequence. The order Treatment is carried out seventh, after the order Ambush.
- Additional protection. All friendly infantry and artillery units receive additional Defense, as stated in the property box.
7. Removal of barbed wire
The unit must stand on the same hex as, or on a hex adjacent to, the hex with which the barbed wire shares a common side.
At the end of the Special orders execution phase the barbed-wire model must be removed from the game board.
- Sequence. The order Removal of barbed wire is carried out seventh, after the order Ambush.
7. Disembarking from transport
For a unit to leave a transport vehicle, the player must give the corresponding order to the transport unit and to the unit that is to disembark.
The player must place the unit's model back from its card onto the game board, on the same hex on which the transport unit stands.
- Sequence. The order Disembarking from transport is carried out seventh, after the order Ambush.
7. Boarding transport
Some units may move across the game board in transport, using a transport unit for movement.
The order may be given only if the unit stands on the same hex as the transport unit.
For infantry units, transport units are armoured vehicle units, as well as railway or water transport, that have the order Boarding transport on their card.
- Sequence. The order Boarding transport is carried out seventh, after the order Ambush.
- Target. State the number of the friendly transport unit.
When carrying out the order Boarding transport, the player must give the corresponding orders to the transport unit and to the unit that is to be placed in it. Units that move in transport do not receive orders. Only the transport unit receives an order.
The model of the unit that is to move in transport is removed from the game board and placed on its card.
A mark must be made in the corresponding box in the unit's status.
One transport unit may carry several units. The total strength of the transported units must not exceed the strength of the transport unit.
If units are transported by rail transport, their strength must not exceed the number of railway carriages.
Firing at transport and transported units. If the transport unit receives damage from fire, the transported unit must receive as many casualties as the transport unit. The transported unit receives damage even if the strength of the transport unit is greater. The player chooses which of the transported units suffer the strength losses. The Defense of the transported unit is not taken into account. The Stamina Test after receiving damage is taken separately for the transport unit and for the transported unit.
Example. A Soviet lorry with strength 4 is transporting a mortar platoon and a machine-gun platoon. The mortar platoon has strength 2, and the machine-gun platoon also has strength 2. When the Soviet lorry receives damage it suffers 2 units of loss. Since the motor column loses 2 strength units, the player must also cross out 2 units from the total of the transported units. The player must choose which unit or units among the transported ones will receive damage. The player decides to remove one strength unit from the mortar platoon and one from the machine-gun platoon.
Historical note: restrictions of the Treaty of Versailles
Under the terms of the Treaty of Versailles, concluded as a result of Germany's defeat in the First World War, the strength and the equipment of the German army were strictly limited. In particular, the total personnel strength of the land army could not exceed 100,000 men, and Germany was forbidden to have certain types of weapons, such as armoured vehicles and aircraft.
Nevertheless, several ways were found to get round these restrictions. One was to develop civil equipment that was permitted under the agreement in such a way that, if necessary, it could be used for military purposes. For example, the Junkers-52 passenger aircraft could also be used as a transport aircraft (which in the end is what happened).
In the 1920s some German designers went to work in neutral countries. Thus the German aircraft designer Dornier built aircraft (including military ones) first in Italy and then in Switzerland, until in the 1930s he moved back to Germany.
Finally, there were a number of cases of banned military equipment being developed in Germany itself, naturally in secret.
After Hitler came to power, Germany refused altogether to carry out the conditions of the Treaty of Versailles.
8. Combat movement
- Sequence. The order Combat movement is carried out eighth, after all other orders.
- In the Movement route the player must state the hexes along which the unit will move.
- Movement range. The figure in the symbol shows the maximum number of hexes the unit may move.
- Change in Defense. The unit's Defense is increased by +1 if this symbol is shown in the order box.
8. Road march
- Sequence. The order Road march is carried out eighth, after all other orders.
- In the Movement route the player must state the hexes along which the unit will move.
- Movement range. The figure in the symbol shows the maximum number of hexes the unit may move.
8. Wait
The unit may remain for the turn on the same hex on which it stood when it received its orders, without carrying out any actions.
- Sequence. The order Wait is carried out eighth, after all other orders.
This order may be carried out by absolutely any unit in the game, even if the order is not shown on its card. If the card does not show this order, no action is needed to assign it to the card.
If the player has not given an order to a unit for any reason, that unit is considered to be carrying out the order Wait for that turn.
8. Firing on the move
When the order Firing on the move is given, the target of the fire must be in line of sight.
Firing is carried out by the general rules, but in the phase of execution of Movement orders. If the unit that is the target of the order Firing on the move entered Close Combat during the execution of Attack orders, then the unit carrying out the order Firing on the move carries out its movement but does not fire.
Firing at units in Close Combat is not possible. If the target of the order was destroyed during the execution of the orders Suppressive Fire or Fire, then the unit carrying out the order Firing on the move carries out its movement and spends one unit of ammunition.
- Sequence. The order Firing on the move is carried out eighth, after all other orders.
- Target. State the number of the enemy unit to be fired upon.
- Movement range. The figure in the symbol shows the maximum number of hexes the unit may move.
In the Movement route the player must state the hexes along which the unit will move. The number of the hex from which the fire will be carried out must be underlined.
When firing on the move, the unit's Fire intensity is reduced as shown on the front of the unit's card in the box Firing on the move.
8. Loading onto platforms
The transport unit for armoured vehicle, and for any type of tank units, is railway transport whose card has the order Loading onto platforms.
When carrying out the order, the railway unit and the transported unit must stand on the same hex.
The transported unit must receive a movement order.
The model of the unit that is to move in transport is removed from the game board and placed on its card.
Units that move in transport do not receive orders. Only the transport unit receives an order.
One transport unit may carry several units. The total strength of the transported units must not exceed the number of transport platforms of the railway unit.
- Sequence. The order Loading onto platforms is carried out eighth, after all other orders.
- Target. State the number of the transport railway unit.
- Duration of the order. The order Loading onto platforms is carried out over 2 turns.
The number of the railway unit must be stated.
8. Unloading from platforms
The transported unit must receive a movement order.
The railway unit must receive the order Unloading from platforms.
The player must place the unit's model back from its card onto the game board, on the same hex on which the transport unit stands.
- Sequence. The order Unloading from platforms is carried out eighth, after all other orders.
- Duration of the order. The order Unloading from platforms is carried out over 2 turns. On a hex with a railway station the order takes half as many turns.
Firing at railway transport
When railway transport is fired upon, the Fire test is taken once for the whole train.
The Fire intensity when firing at it is used as when firing at armoured vehicles.
When damage is received, the player distributes the damage among the train, the transport carriages and the platforms themselves:
- The train (railway unit): cannot receive movement orders.
- Transport carriages: the transported infantry unit must receive as many strength losses as the damage.
- Transport platforms: the transported vehicle unit must receive as many strength losses as the damage.
The Defense of the transported units is not taken into account. Only the transported units take Stamina Tests for their losses.
Example. Railway transport carrying 4 units of infantry and two units of armoured vehicles is the target of the order Fire by a full-strength unit of German Pz. III tanks. Firing is carried out from a distance of three hexes. The value 1 must come up on the dice. The Fire intensity is used as for armoured vehicles. The Fire intensity against armoured vehicles of the Pz. III is 11.
In the Fire test the following values came up: 2; 5; 3; 4; 1; 4; 5; 3; 1; 2; 4.
The player for the Soviet army decides that the damage was received by the transport carriages.
Two damages are inflicted on the transport carriages. The player loses two strength units of infantry. A Stamina Test is taken for the infantry unit.
Special unit properties and abilities
A unit may use only the special properties and abilities listed on its card.
Wire destruction. If a unit with this ability fires at a hex on whose boundary barbed wire is placed, the wire is considered destroyed and must be removed from the game board. All barbed wire on the boundaries of that hex is considered destroyed.
Breaking through barbed wire. If a unit with this ability passes through a side of a hex on which barbed wire is placed, the wire is considered destroyed and must be removed from the game board. The unit's movement is not slowed.
Area fire. The target of the fire may be a hex rather than a unit. The hex to be fired on must be in line of sight and within the range of the unit, or within the sight of a friendly unit. In the order box Fire, the number of the hex to be fired on must be stated. The Fire test is carried out separately for each unit that stands on the attacked hex.
Placing a smoke screen. The unit may fire smoke shells over an area. A Smoke counter is placed on the hex (see Fire. Smoke screen, page 16).
Fear of tanks. If a unit of tanks of any type attacks a unit that has the property Fear of tanks, then before Close Combat that unit must pass a Stamina Test.
Firing sector. The unit may fire only within its firing sector (see Firing sector, page 12).
Firing at covered targets. If the enemy is not in line of sight, but is within the firing sector and the firing range, it may nevertheless be designated as the target of an order by a unit that has this ability. The Fire intensity of the unit when firing at a covered target is reduced, as shown on the card.
The target must be in the line of sight of one of the player's units that can carry out target designation. Target designation may be carried out by all units except lorries and goods trains.
Carrying out this order is possible only when a headquarters is on the game board that is not in Close Combat or in the state Suppressive Fire.
Airborne landing. The unit may be landed by aviation units (see Airborne landing, page 19).
Movement through a swamp. The unit may move through a hex with a swamp. Movement is possible only one hex per turn.
Mountain terrain. The unit may move along a steep slope. When moving up or down, the unit may pass only 1 hex.
Concealed state. In the game, a unit with this property is in the concealed state. For the enemy to be able to designate a concealed player unit as the target of an order, the enemy must do one of the following:
- detect it, as described in the Ambush detection rules (page 23);
- bring any of its units onto an adjacent hex.
In that case the unit loses the concealed state. If a unit with this property was detected but moved onto another hex, then, starting from the next turn, it is again considered concealed. If a unit with the property Concealed state carries out the order Road march, then at the start of the next turn the unit is not considered to be in the concealed state.
If units that stand on the same hex as a unit in the concealed state are fired on, the unit in the concealed state receives hits by the rules of Fire at a group of units (see page 12). If area fire is directed at the hex on which a unit in the concealed state stands, a Fire test is carried out for that unit. The model of a unit in the concealed state is always on the game board, except when the unit carries out the order Ambush.
Crossing a water obstacle. The unit may move through a hex with a river or lake. Movement is possible only one hex per turn.
Fire adjustment. An artillery unit that carries out the order Fire may once per turn re-roll the dice on which unsuccessful values came up in the Fire test.
Fire adjustment is possible only for one target stated in the artillery unit's order. The target of the artillery unit must be in the firing sector of the unit with the property Fire adjustment, in its line of sight within a range of not more than 8 hexes.
Fire adjustment is possible only if the unit with this property carries out the order Defence. Fire adjustment when carrying out any other order is not possible.
Fire adjustment is not possible when the artillery unit is carrying out the order Suppressive Fire.
Fire adjustment does not apply to anti-aircraft artillery units firing at aviation units. For anti-aircraft artillery units firing at ground targets, this rule applies without change.
Headquarters and command
Command zone. Each headquarters unit has its own Command zone. All of the player's units that are in the Command zone have special command properties.
Raising morale. All units that are in the Command zone and in the line of sight of the headquarters receive an additional value for Stamina, as stated in the property box on the unit's card.
Calling aviation. Take-off of aviation units is possible only when a headquarters is on the game board. The headquarters must not be in Close Combat or in the state Suppressive Fire. If during the game the headquarters has been destroyed, aviation units can no longer receive the order Take-off.
Firing on the move. When firing on the move, the unit's Fire intensity is reduced as shown on the front of the unit's card.
Railway unit. A unit with this property may move only on hexes with a railway. The unit moves along the railway forward or backward.
Up to two anti-aircraft artillery units may be included in any railway unit. The anti-aircraft artillery is considered to be mounted on additional railway platforms. The Fire intensity when firing at the platforms of anti-aircraft artillery is used as when firing at armoured vehicles. The strength of the railway platforms with anti-aircraft artillery is the same as the strength of the anti-aircraft artillery itself.
When a railway unit is fired on, the platforms with anti-aircraft artillery also come under fire. Unit models must be kept on their cards off the game board. Anti-aircraft artillery units may carry out only the orders Suppressive Fire, Fire and Defence. The order Defence against ground targets is possible only if the railway unit is not carrying out a movement order. The order Defence against aviation units is possible even if the railway unit is carrying out a movement order.
When carrying out the order Railway repair, a railway unit may simultaneously carry out any other order except a movement order.
Water unit. A unit with this property may move only on hexes with a river, except hexes with a ford, a destroyed bridge, or a fully completed pontoon bridge. The unit may cross hexes with a bridge and with a railway bridge as in normal movement. When carrying out the orders Receiving supplies and Boarding transport, the transported unit and the ammunition must stand on a hex adjacent to the water unit.
Skiers. A unit with this property does not slow its movement when moving across hexes with winter terrain. On snow-covered plains, skiers move a distance of up to 3 hexes.
Sniper. A unit with this property does not inflict damage on the enemy. Instead, if at least one damage has been inflicted, the enemy must immediately pass a Stamina Test. If the test is not passed, the enemy unit enters the state Suppressive Fire and does not carry out the order it received.
Engineering structures
Depot
A depot does not block line of sight.
A depot may be destroyed by demolition, or by fire from units that have the engineering-structure symbol among their target types.
Fire at engineering structures is carried out by the general rules of fire. One hit is enough to destroy the target.
The number of the hex where the depot is located must be stated on the depot card. The depot card must be placed on the table so that it is visible to all players. A depot may hold ammunition for only one army. A depot cannot be captured and used by the enemy.
Replenishing ammunition. Standing on a hex where a depot is located, units may replenish their ammunition when carrying out the order Receiving supplies. The player must erase from the unit's card as many marks as the player has decided to receive from the depot.
On the depot card the player must cross out as many ammunition units as were transferred to the unit. The player is not obliged to replenish all of the ammunition.
A unit cannot receive more ammunition units than are stated on its card. Several units may receive the order Receiving supplies from one depot at the same time, if they stand on the same hex.
Replenishing supplies at a depot. Transport units that carry ammunition may replenish ammunition at a depot. For this, the transport units, standing on the same hex as the depot, must receive the order Receiving supplies. The player must cross out on the transport unit's card as many ammunition units as the player has decided to deliver to the depot.
On the depot card the player must erase as many marks of ammunition as were received at the depot.
Storing ammunition. A transport unit may store the ammunition it carries in any location. For this, the transport unit must receive the order Receiving supplies. A depot is placed on the hex where the transport unit stands. The number of the hex where the depot will be located must be stated on the depot card. The player must cross out on the transport unit's card as many ammunition units as the player has decided to deliver to the depot. On the depot card the excess ammunition must be crossed out. No more than one depot may be on one hex.
Pontoon bridge
A pontoon bridge is a crossing over a hex with a river.
It does not block line of sight.
Water units cannot cross a hex with a pontoon bridge. Water units may cross a hex with a pontoon bridge that is being built or is not yet completed. A unit of any type may cross the river by a pontoon bridge.
A pontoon bridge may be built during the game by a sapper unit carrying out the order Laying a bridge.
It may be destroyed by demolition, or by fire from units that have the engineering-structure symbol among their target types.
Fire at engineering structures is carried out by the general rules of fire. One hit is enough to destroy the target.
Bridge
In the game a bridge may be of two types. Each type of bridge has a particular Defense and carrying capacity. A bridge is a crossing over a hex with a river.
Diagram features in the original: the bridge's damage example; the Defense of this type of bridge; the number of the hex on which the bridge stands; the unit types that may cross this type of bridge; the bridge's strength; the carrying capacity of this type of bridge. Example in the original: after the first damage, heavy tanks can no longer cross the bridge; after the second damage, light tanks and armoured vehicles can no longer cross it either.
A bridge does not block line of sight. Units move on the bridge by the rules for roads. A pillbox cannot be set up on it, and a trench cannot be set up. Ambush is not possible for any unit type on a bridge. It may be fired on by units that have the engineering-structure symbol among their target types. Fire at engineering structures is carried out by the general rules of fire.
For each damage received, one symbol of the bridge must be crossed out. The carrying capacity of the bridge is reduced accordingly. When one damage is received, one column must be crossed out. When the last column is crossed out, the bridge is considered destroyed. When a bridge is destroyed, the additional hex with a bridge must be turned over to show the destroyed bridge on the game board. All units on the bridge when it is destroyed are considered destroyed.
Destroyed bridge
A destroyed bridge is not a crossing over a hex with a river.
It does not block line of sight.
Water units cannot cross a hex with a destroyed bridge.
It may be restored by a sapper unit. The number of turns and the rule for restoring it are the same as for building a pontoon bridge.
Railway bridge
A railway bridge is a crossing over a hex with a river.
It does not block line of sight.
Water units may cross a hex with a railway bridge.
When carrying out any of the movement orders across a hex with a railway, armoured vehicle, Light, Medium or Heavy tank units move one hex less.
A pillbox cannot be set up on it. A trench cannot be set up. Ambush is not possible for any unit type.
Artillery units cannot receive the order Deployment.
Railway units cannot receive the orders Loading onto platforms and Unloading from platforms.
It may be destroyed by demolition, or by fire from units that have the engineering-structure symbol among their target types. Fire at engineering structures is carried out by the general rules of fire, and one hit is enough to destroy the target.
When a railway bridge is destroyed, the additional hex with a bridge must be turned over to show the destroyed bridge on the game board. All units on the bridge when it is destroyed are considered destroyed.
Destroyed railway bridge
A destroyed railway bridge is not a crossing over a hex with a river.
It does not block line of sight.
It cannot be restored.
Water units cannot cross a hex with a destroyed railway bridge.
Railway
A railway does not block line of sight.
When carrying out any of the movement orders across a hex with a railway, armoured vehicle, Light, Medium or Heavy tank units move one hex less.
Railway units move along the railway forward or backward without slowing.
A railway may be destroyed only by demolition, or by bombing by a bomber unit that has the special order Destruction of railway.
When a railway is destroyed, an additional hex with a destroyed railway must be placed to show the destroyed railway on the game board.
Destroyed railway
A destroyed railway does not block line of sight.
Armoured vehicle, Light, Medium or Heavy tank units, when carrying out any movement order along a railway, move one hex less. Railway units cannot move through a hex with a destroyed railway.
It may be restored when a special unit that has the order Railway restoration on its card carries it out (for example, an armoured train).
Pillbox
Cost: 20 (when set up at the start of the game as an addition to the army).
It does not block line of sight.
Units in a pillbox have +3 Defense.
A pillbox cannot be set up on the hexes: Forest; Swamp; River; Lake; Ravine; Ford; Railway.
It may be destroyed by demolition, or by fire from units that have the engineering-structure symbol among their target types. Fire at engineering structures is carried out by the general rules of fire.
Two damages must be inflicted to destroy a pillbox.
- When the first damage is received, the flag is removed from the pillbox.
- When the second damage is received, the pillbox is considered destroyed and is removed from the game.
Fire tests against the pillbox and against the infantry units are taken separately.
Only 2 infantry units that do not have the order Folding or Deployment may occupy a pillbox, not counting machine-gun platoons. Infantry units that are machine-gun platoons may occupy a pillbox by the general rules.
Units that stand in a pillbox receive a firing sector. The firing sector of units in a pillbox is directed to three sides of the hex, as shown on the diagram.
No more than one pillbox may be placed on one hex.
When a pillbox is destroyed by demolition carried out by a sapper unit, all units in the pillbox are considered destroyed.
For destroying a pillbox by demolition, one damage is sufficient.
Additional elements
Infantry trench
Cost: 5 (when set up at the start of the game, as an addition to the army).
Unit status: a mark of the unit's status is made.
Units in a trench have +2 Defense. This rule applies to all units that can stand in a trench.
To occupy a trench the player must give the order Defence. To occupy a trench with an artillery unit, that unit must be in the deployed position.
A trench cannot be placed on the hexes: River; Swamp; Lake; Ford; Stones; Bridge; Railway bridge.
When occupying a trench, a mark must be made in the unit's status. A unit that carries out the order Defence and is in a trench receives +3 Defense: (+2 for the trench and +1 for the order Defence). The trench must be placed along one of the sides of the hex. A unit in a trench has a firing sector and flanks.
A trench cannot be removed from the game. Leaving a trench is possible only when carrying out one of the movement orders. Removing artillery from a trench is possible only when carrying out the order Folding. A trench may be placed on the game board when carrying out the order Digging in.
Tank trench
Cost: 15.
Light, Medium and Heavy tank units have +2 Defense in a trench. The trench must be oriented towards one of the sides of the hex.
To occupy a trench the player must give the order Defence. When occupying a trench, a mark must be made in the unit's status. A unit that carries out the order Defence and is in a trench receives +3 Defense: (+2 for the trench and +1 for the order Defence). A unit in a trench has a firing sector and flanks.
A trench cannot be removed from the game. Leaving a trench is possible only when carrying out one of the movement orders.
Anti-tank ditch
Cost: 10.
Armoured vehicle, Light, Medium and Heavy tank units cannot pass through the side of the hex towards which the anti-tank ditch is directed.
It does not block line of sight.
An infantry trench cannot be set up.
A tank trench cannot be set up.
The order Ambush is not possible for any unit type.
A pillbox may be set up.
Barriers
Barbed wire
Cost: 6 (when set up at the start of the game, as an addition to the army).
Barbed wire must be placed along one of the sides of the hex.
Armoured vehicle and infantry units cannot pass through the side of the hex on which barbed wire is placed.
Barbed wire may be destroyed and removed from the game board in three ways:
- If a unit that has the property Destruction of barbed wire on its card fires at a hex on which barbed wire is placed, the wire is considered destroyed. It must be removed from the game board. All barbed wire on the hex is considered destroyed.
- If a unit that has the property Breaking through barbed wire on its card passes through the side of the hex on which barbed wire is placed, the wire is considered destroyed. It must be removed from the game board. The unit's movement is not slowed.
- If a unit carries out the order Removal of barbed wire (see page 26).
Anti-tank obstacles
Cost: 7 (when set up at the start of the game, as an addition to the army).
Anti-tank obstacles must be placed along one of the sides of the hex.
Only infantry units may pass through the side of the hex on which anti-tank obstacles are placed.
Anti-tank obstacles may be destroyed and removed from the game only if a unit carries out the order Removal of anti-tank obstacles (see page 26). The unit must stand on the same hex as, or on a hex adjacent to, the hex along whose common side the anti-tank obstacles are placed.
Terrain
Terrain affects the movement of units only at the moment of entering a hex. Leaving a hex does not affect a unit's movement. When carrying out the order Road march, units may pass an additional number of hexes along a road and bridge only if the whole movement route runs along those hexes.
Plain
It does not block line of sight.
The order Ambush is not possible for any unit type.
An infantry trench may be set up.
A tank trench may be set up.
A pillbox may be set up.
Scrub
It blocks line of sight.
The order Ambush is possible only for infantry units.
An infantry trench may be set up.
A tank trench may be set up.
A pillbox may be set up.
Swamp
It does not block line of sight.
A pillbox cannot be set up.
A trench cannot be set up.
The order Ambush is not possible for any unit type.
Movement is possible only for units that have the property Movement through a swamp on their card, and only one hex.
River
It does not block line of sight.
An infantry trench cannot be set up.
A tank trench cannot be set up.
A pillbox cannot be set up.
Movement through a hex with a river is possible only for water units and for units that have the property Crossing a water obstacle on their card.
The line of sight from a river hex towards the banks is 1 hex. A river hex can be seen only from neighbouring bank hexes.
Road
Road is an additional terrain element. The road lies on one of the types of terrain, whose properties are retained.
If, when carrying out the order Movement, the movement route runs strictly along the road, units may pass an additional number of hexes: Transport +3, Armoured vehicles +2, Light tanks +1, Heavy tanks +1.
Road through forest and light woodland. Movement along a road through forest or light woodland is possible for Transport, Armoured vehicle, Light, Medium and Heavy tank units only towards the sides of the hex into which the road leads.
The firing sector for all units, except infantry, is possible only towards the sides of the hex into which the road leads.
The line of sight for all units can be drawn only towards the sides of the hex into which the road leads.
Diagram in the original: "Line of sight is present for all units"; "Firing sector is possible for all units"; "Line of sight and firing sector are impossible for all units except infantry."
Ploughed field
It does not block line of sight.
The order Ambush is not possible for any unit type.
An infantry trench may be set up.
A tank trench may be set up.
A pillbox may be set up.
When carrying out any movement order, the number of hexes units can move is reduced: Infantry −1, Transport −2, Armoured vehicles −1, Light tanks −1, Medium tanks −2, Heavy tanks −2.
The minimum distance a unit can move across a ploughed field is 1 hex.
Ford
It does not block line of sight.
The order Ambush is not possible for any unit type.
An infantry trench cannot be set up.
A tank trench cannot be set up.
A pillbox cannot be set up.
Water units and units with the property Crossing a water obstacle move along the river. Movement through a ford takes several turns:
- Turn 1: the unit must stop on the ford hex.
- Turn 2: the unit moves onto the adjacent hex through the ford.
- Turn 3: the unit may receive a movement order and move as normal.
The line of sight from a river hex towards the banks is 1 hex. A river hex can be seen only from neighbouring bank hexes (see River visibility).
Lake
It does not block line of sight.
An infantry trench cannot be set up.
A tank trench cannot be set up.
A pillbox cannot be set up.
The order Ambush is not possible for any unit type. Only units that have the property Crossing a water obstacle on their card may move through a hex with a lake.
Stones
It does not block line of sight.
The order Ambush is not possible for any unit type.
An infantry trench cannot be set up.
A tank trench cannot be set up.
A pillbox may be set up.
When carrying out any movement order, the number of hexes units can move is reduced: Transport −2, Armoured vehicles −1.
The minimum distance a unit can move across stones is 1 hex.
Ravine
Diagram in the original shows the steep slope, the sheer slope and the gentle slope.
It does not block line of sight.
An infantry trench cannot be set up.
A tank trench cannot be set up.
A pillbox cannot be set up.
The order Ambush is not possible for any unit type.
Movement through a ravine for all unit types that can cross a ravine is possible only one hex per turn.
Armoured vehicle and Transport units cannot cross a ravine.
Movement along a ravine without a penalty to movement range is possible for all unit types only towards the sides of the hex into which the ravine leads.
Units standing on a hex with a ravine are not considered to be in line of sight. Units standing on a hex with a ravine are considered visible only from a neighbouring hex or by aviation units. Units standing on a hex with a ravine also have no line of sight.
If a neighbouring hex to a ravine holds a hill with a gentle slope relative to the plain, then relative to the ravine the hill is considered a steep slope.
If a neighbouring hex to a ravine holds a hill with a steep slope relative to the plain, then relative to the ravine the hill is considered a sheer slope.
The terrain rules for a summer ravine and a snow-covered ravine are the same.
Light woodland
It blocks line of sight.
An infantry trench may be set up.
A tank trench cannot be set up.
A pillbox may be set up.
The order Ambush is possible for all unit types. Defense +1 for all unit types.
Movement of Transport and Armoured vehicle units is not possible. Light or Heavy tank units, when carrying out any movement order through light woodland, move one hex less, but may always move 1 hex.
A forest clearing may be cut when a unit carries out the order Clearing a forest lane.
Forest
It blocks line of sight.
An infantry trench may be set up.
A tank trench cannot be set up.
A pillbox cannot be set up.
The order Ambush is possible.
Defense +2.
Only infantry units may move through and stand in a forest. Movement through a forest is possible only one hex per turn.
Firing at aviation units is not possible. A forest clearing may be cut when a unit carries out the order Clearing a forest lane.
The terrain rules for a summer forest and a snow-covered forest are the same.
Forest clearing
It blocks line of sight.
A pillbox cannot be set up.
Defense +2 for all unit types in a forest.
Defense +1 for all unit types in light woodland.
The order Ambush is possible for all unit types except artillery units.
Artillery units cannot receive the order Deployment.
Movement along a forest clearing is possible for all unit types towards the sides of the hex into which the clearing leads.
The firing sector for all units except infantry is possible only towards the sides of the hex into which the clearing leads.
The line of sight for all units except infantry can be drawn only towards the sides of the hex into which the clearing leads.
Firing is not possible for units that have the property Firing at covered targets on their card.
Diagram in the original: "Line of sight is present for all units"; "Firing sector is possible for all units"; "Line of sight and firing sector are impossible for all units except infantry."
Winter terrain
Plain (winter)
It does not block line of sight.
The order Ambush is not possible for any unit type.
An infantry trench may be set up.
A tank trench may be set up.
A pillbox may be set up.
On snow-covered plain, a unit with the property Skiers moves a distance of up to 3 hexes.
When carrying out the order Attack or any of the movement orders, the number of hexes units can move is reduced: Infantry −1; Transport −1; Armoured vehicles −1; Light tanks −1; Medium tanks −1; Heavy tanks −1.
Scrub (winter)
It blocks line of sight.
The order Ambush is possible only for infantry units.
An infantry trench may be set up.
A tank trench may be set up.
A pillbox may be set up.
When carrying out the order Attack or any of the movement orders, the number of hexes units can move is reduced: Infantry −1; Transport −2; Armoured vehicles −1; Light tanks −1; Medium tanks −1; Heavy tanks −1.
River. Ice
It does not block line of sight.
An infantry trench cannot be set up.
A tank trench cannot be set up.
A pillbox cannot be set up.
Movement through a hex with a river is possible only for infantry units, in any direction.
The line of sight from a river hex towards the banks is 1 hex (page 40). A river hex can be seen only from neighbouring bank hexes.
A hex with river ice may be fired upon by units that have the property Area fire. The number of the hex is stated as the target.
One hit is enough to break the ice on the river. When the ice is broken, a hex with broken ice is placed. All units standing on the ice at the moment of breaking are considered destroyed.
River. Broken ice
It does not block line of sight.
An infantry trench cannot be set up.
A tank trench cannot be set up.
A pillbox cannot be set up.
Movement through a hex with broken ice is impossible for any unit type.
Settlements
All possible settlements in the game are presented on one card. Each settlement on the card has its own number, the same as on the game board. Settlements may receive damage. Engineering structure is used as the target type. The Defense of a settlement is stated on its card. Each damage received reduces the additional Defense that a unit can receive while standing on a hex with a settlement.
If, when firing at a unit located in a settlement, the shots that missed (dice values above accuracy) are obtained, and the firing unit has engineering structures among its target types, then these misses are used instead of the Fire intensity, but no more than the number stated on the firing unit's card when firing at a settlement.
Firing at a settlement. Units that have the corresponding symbol in the firing-power table may fire at a settlement. Firing may be carried out directly at a settlement in order to destroy it. An ambush set up in a settlement is considered detected when the settlement is completely destroyed.
When firing at a unit that is in a settlement, the dice whose values exceeded the accuracy (the misses) are re-rolled for the Fire test against the settlement. Their number must not exceed the Fire intensity against structures.
City
Settlements block line of sight. The order Ambush is possible for all unit types. A pillbox may be set up.
Movement follows the road rules. Infantry receives +2 to the value that must come up on the dice when firing in Close Combat at Transport, Armoured vehicles and any type of tank.
Arson by a sapper unit is possible (see page 27).
Village
Settlements block line of sight. The order Ambush is possible for all unit types. A pillbox may be set up.
Movement follows the road rules. Infantry receives +2 to the value that must come up on the dice when firing in Close Combat at Transport, Armoured vehicles and any type of tank.
Arson by a sapper unit is possible (see page 27).
Railway station
The full rules for using a railway station and for applying its card will be published in new expansion sets.
It blocks line of sight. The order Ambush is possible for all unit types.
Defense +1 for all unit types except infantry. Defense +2 for infantry units.
Armoured vehicle, Transport, Light, Medium or Heavy tank units, when carrying out any of the movement orders along a railway, move one hex less. Infantry receives +1 to the value that must come up on the dice when firing in Close Combat at Transport, Armoured vehicles and any type of tank.
The orders Loading onto platforms and Unloading from platforms take half as many turns.
Hill
Gentle slope
A hex 1 level higher or lower.
When moving up, a unit may pass only 1 hex.
Line of sight is increased by 1 hex.
Steep slope
A hex 2 levels higher or lower. Only infantry units may move on a steep slope.
When moving up or down, a unit may pass only 1 hex.
Line of sight is increased by 2 hexes.
Sheer slope
A hex 3 or more levels higher or lower. Movement is possible only for units that have the property Mountain terrain.
When moving up or down, a unit may pass only 1 hex.
Line of sight is increased by 2 hexes.
The line of sight cannot be increased by more than two hexes.
When determining line of sight, a unit does not see only the hex that lies behind the hex that forms the barrier. Units that were attacked on a hill in Close Combat receive +1 Defense.
Units that attack a unit on a hill in Close Combat receive −1 to their accuracy value.
The command zone of a headquarters that stands on a hill is increased by 1, regardless of the height level. The firing range is increased by 1, regardless of the height level.
Firing from a hill
When firing from a hill, the firing range is increased by one hex. The accuracy of fire changes as shown in the diagram.
Diagram in the original compares the range and accuracy table on the unit card (1) with the table for firing from a hill (2); its legend reads "same values" and "values are equal".