RulesPal
Chat
Rulebook
The Walking Dead: All Out War – Prelude to Woodbury Solo Starter Set thumbnail

The Walking Dead: All Out War – Prelude to Woodbury Solo Starter Set

Expansion for The Walking Dead: All Out War

The Walking Dead: All Out War – Prelude to Woodbury Solo Starter Set Rulebook

Table of Contents

Table of Contents

  • Components
  • Quick Start Rules
  • The Prelude to Woodbury – Part 1
    • Setup
    • Playing the Game
    • 1. Action Phase
      • Move
      • NOISE
      • Tutorial – Action Phase 1
    • 2. Event Phase
      • 1. Check Kill Zones
      • 2. Draw an Event Card
      • Tutorial – Event Phase 1
    • 3. Melee Phase
      • Tutorial – Melee Phase 1
  • Turn 2
    • Search
    • Equipment
    • Attacking Prone Models
      • Tutorial – Turn 2
  • The Prelude to Woodbury – Part 2
    • Setup
    • Scenery
    • Events
    • New Action – Shoot
    • MAYHEM
    • New Action – Hold Nerve
    • Victory
      • New Rules – Example
  • The Prelude to Woodbury – Part 3
    • Setup
    • New Rules
      • Equipment Slots
      • New Action – Make NOISE
      • Bites
      • Scenario Special Rules
  • Solo Play Quick Reference
    • Turn Sequence
    • Panic
    • Actions
    • Move
    • Shoot
    • Noise and Mayhem
    • Other Actions
    • Moving Walkers
    • Resolving Melee
    • Melee Roll

Components

  • Rulebook
  • Survivor card (Brian Blake)
  • Walker Reference Card
  • Threat Tracker with plastic spinner
  • Kill Zone template
  • Range Ruler
  • 2 Cars
  • 3 Barriers
  • 11 Dice
  • Brian Blake model
  • 5 Walker models
  • 4 Captured Walker counters
  • Health counter
  • 5 Supply counters
  • 15 Event cards
  • 4 Equipment cards
  • 8 Supply cards

Assembly: punch out all of the counters and scenery from the card sheets. Insert the plastic spinner into the Threat Tracker, as shown.

The card faces on the components page are printed as small, overlapping stacks and are not legible in the print, so the card text is not reproduced here. The rules needed to play are in the booklet body below.

Quick Start Rules

The first part of this booklet will take you through the basic rules of the game and allow you to get playing in dead-quick time.

To do this, some of these rules may be slightly different to the main rulebook. While you're learning, ignore anything that is not specifically mentioned – you can learn the rest of the rules later once you've mastered the art of killing Walkers!

There is also a small chance that you will come across situations not covered by this booklet. If this happens, think about what Brian would do. Make a judgement on the most sensible solution, and do that!

The Prelude to Woodbury – Part 1

The dead have begun to rise, and Brian needs a place to hide. He decides to make his way to his parent's empty townhouse to wait for rescue. He stops to scavenge for food on the way, but he's not the only one who's hungry!

Setup

You will need to set up the game as follows:

  1. Define a 10" x 10" playing area on a flat surface.
  2. Gather the components in the diagram above.
  3. Place the supply counters, Brian model and Walker models onto the playing area in the positions shown.
  4. Shuffle the Event and Supply card decks and place them face-down at the side of the gaming area. Only use the cards from the deck with the SOLO symbol.
  5. Put the Walker Reference Card, Threat Tracker, Range Ruler, Kill Zone template and dice within easy reach.
  6. Turn the dial on the Threat Tracker to position 1.

Once you've read the rules and played through the game once or twice, the back page of this book has a handy summary of all the rules for quick reference.

Playing the Game

The Walking Dead: All Out War is played in a series of turns, each of which is broken down into the following phases:

  1. Action Phase – in this phase, players will activate their Survivor models and move them around the table. Sometimes, the Walkers will react to their movement.
  2. Event Phase – in this phase, the Walkers will be activated and move toward your Survivors.
  3. Melee Phase – in this phase, all hand-to-hand fighting is resolved.
  4. End Phase – in this phase, 'dead' Walkers can rise again, and you check to see if you've done enough to win!

We will now play through turn 1, going through the phases one by one. Each phase will finish with an example – for your first game simply follow this step by step.

1. Action Phase

Survivors are activated one at a time, each making two different Actions – they may not make the same Action twice. There will be more options later, but for your first turn we will talk about how to Move.

Move

The Move Action allows Survivors to travel around the gaming area. When moving, each model must choose to either Sneak or Run, using the distances below.

ActionMax DistanceAdditional Effects
SneakUp to 4"None
RunUp to 8"Creates NOISE

The range ruler has these distances marked on it. Choose a direction, and place one end of the ruler in contact with the model's base. Pick up the model and move it, placing it behind the marker for the distance you want to move.

This is an important choice to make, as NOISE will draw the Walkers towards you, but Sneaking to stay quiet will take longer to cross the table.

Survivors do not have to move in straight lines – they can move in any direction up to the distance listed in the table.

Survivors may not move through other models. If a Survivor comes into contact with an enemy at any point it will immediately stop and make no further Actions.

NOISE

Staying silent is an essential skill when trying to avoid the Walkers, but it is not always possible!

When NOISE is caused:

  • Measure 10" from the NOISE.
  • Pick the closest, standing Walker not in base contact with a Survivor that is at least partially within range (note: this is referred to as an eligible Walker).
  • It immediately Shambles 6" in a straight line directly towards the NOISE.
  • If the movement brings it into contact with a Survivor, it will stop. Walkers will move through other Walkers.
  • This is done immediately after the NOISE is caused, so it can stop Survivors from making a second Action.

The red side of the ruler has these distances marked for your convenience.

Tutorial – Action Phase 1

Try taking your first Action phase now. Give both Sneaking and Running a try and see how the effects work differently. Follow our example:

Brian decides to Run towards the counter on the far left so that he can get there quickly. However, this causes NOISE. Walker A is the closest, and so it will move up to 6" towards Brian. This is enough for the Walker to move into base contact, and it will fight him in the Melee phase later.

Once you've decided where to move, it's time for the Event phase.

2. Event Phase

In the Event phase, all manner of dangerous things can happen as the Walkers shamble around the table. The phase has two parts:

  1. Check Kill Zones
  2. Draw an Event Card

1. Check Kill Zones

Each Walker on the table has a Kill Zone – an area in which no matter how quiet you are, you will still be attacked! The Kill Zone template is used for this.

Take the template and hold it over each eligible Walker on the table so that the Walker itself is fully visible through the hole in the middle.

If there are any Survivors at least partially beneath the template, the Walker is immediately moved into contact with the nearest one.

If there are no Survivors under the Kill Zone template, the Walker does not move.

Moving Walkers – Key Points

  • Walkers always move at a Shamble (6").
  • They always move in straight lines.
  • Walkers may move directly through other Walkers and supply counters, but may not stop on top of them.
  • Walkers will stop if they come into contact with a Survivor.
  • When moving Walkers into base contact with a Survivor, it is always considered reasonable to 'shuffle' models around slightly to allow additional Walkers to attack, as long as there is room.
  • Each Walker may only move once for each Event card drawn, and this includes Walkers entering play.
  • If there are not enough standing, unengaged Walkers on the table to fulfill the card's instructions, any surplus Walkers will enter play from the edges.

2. Draw an Event Card

Next, draw a card from the Event deck. This will affect the movement of the Walkers on the table, and this is also where the Threat Tracker will come into play – the cards will have different effects depending on the current Threat.

Read the card, and apply the results that relate to the current Threat Level.

In this game, the Threat Level started at position 1 – All Quiet, so you would apply the result following the 'All Quiet' heading in the first turn.

Some Event cards require you to increase the Threat Level before resolving the event. This may result in the Threat Level increasing to the next band, meaning that the card's rules will become deadlier.

Moving Walkers

Event cards usually require you to move Walkers around the table. The number of Walkers is often determined by the roll of a die. For example, if a card said "Each player rolls a blue die and moves that many eligible Walkers", you would roll a blue die, and pick a number of Walkers to move equal to the number of success symbols rolled.

Walkers Entering Play

If for example a card says "[white die] Walkers enter play", you would roll a white die in the same way as if you were moving Walkers. However, instead of moving those already on the table, you must take extra Walkers from the game box and place them anywhere on the edge of the gaming area. They may not be placed within the Kill Zone of a Survivor.

If you run out of Walker models to place, add 1 to the Threat Level instead.

Tutorial – Event Phase 1

Take your first Event phase now. When you draw an Event card, have a look through the deck at the different results, and how dangerous they can get at higher Threat Levels. Follow our example Event phase:

1. Check Kill Zones

The Kill Zone template is placed over the two standing Walkers who are not currently engaged – B and C. Walker C has no prey within reach, but Walker B's template overlaps Brian. It is moved into contact with him.

The situation looks dire, but conveniently this has moved the Walker away from the supply counter in the middle, leaving it free for Brian to collect later.

2. Draw an Event Card

Then, an Event card is drawn from the deck – 'The Hunger'. This card increases the Threat before it is resolved, so the dial is turned to position 2. The Threat Level is still All Quiet, so the All Quiet result from the card is resolved, which has no effect at this early stage of the game.

3. Melee Phase

In the Melee phase, all models in base contact with an enemy will fight. As this is so dangerous, if there are any models engaged in melee the Threat Level is increased by 1 at the start of the phase.

The first step is to work out which dice to roll. Every model has a set of values on their card. The two that we are looking for here are Melee and Defense.

These values are shown as a number of dice. Each model will roll this many dice and compare to their opponent's roll to see who wins.

Before rolling any dice, players must decide whether their models will attack or defend, which will determine which value they use.

  • Attacking is the only way to damage an enemy model.
  • Defending can give you a better chance of surviving an attack, but you cannot harm your opponent.

All models on one side of a melee must do the same thing, and they roll their dice together. Walkers can only attack in melee – they cannot defend.

Walker Outnumbering

When there are multiple Walkers on one side of a melee, they roll a number of dice shown in the table below:

WalkersDice
11
23
36
410
515

As you can see, getting swamped by a herd can spell death for your characters – better to take the Walkers on one at a time!

The Melee Roll

Once you have chosen to attack or defend, take the number of dice shown on your card and roll them. If there are multiple models on one side of a melee, their dice are rolled together. You will also need to roll for the Walkers, although in two-player games your opponent will do this for you.

All of the dice rolled will show a number of success symbols – add these up to get a total score for each side.

The side with the highest total is the winner. If the result is a draw, Survivors will always beat Walkers.

Don't put the dice aside just yet – you'll need to refer to the results in a minute.

Push Back

Any models that lose a melee are immediately pushed 1" directly away from all of the models they had been fighting.

If a model cannot be pushed back due to the proximity of other nearby miniatures or the board edge, the winning models are pushed back instead.

Resolve Damage

Compare the dice totals from the previous step. The difference in these scores is the damage done to the loser. For example, if the winning roll had 4 successes, and the losing roll had 2 successes, the loser would take 2 damage (4-2=2). If a defending model wins a melee, it does not cause any damage.

If there are multiple models on the losing side, the attacker chooses how to distribute the damage.

When a Walker takes any damage, it is laid prone. Put the model on its side. It may be able to stand up again later.

For each point of damage on a Survivor, move the Survivor's health counter one space to the right. If the counter reaches 0, the Survivor is dead. Replace the Survivor with a prone Walker. If you have no Survivors left, it's game over!

Headshots (!)

You will see that the dice also have a Headshot (!) symbol on some faces. These symbols do not add to your total, but are the only way to permanently kill a Walker.

Walkers that suffer any damage from an attack that rolls a ! are removed from play.

If a Survivor is killed as a result of an attack that rolled a !, no prone Walker model is placed – there's no coming back from a headshot!

If you roll multiple Headshots as part of your melee attack, you can only allocate one Headshot to each enemy model.

Tutorial – Melee Phase 1

Take your first Melee phase now. Try rolling the dice for each melee a couple of times to see what different results you can get. Here's how our example Melee phase turned out:

Brian is engaged in melee, and so the Threat Level is raised by 1 point.

Brian decides to defend, as he is fighting two Walkers and has a better chance of success with his Defense value of [two red dice]. He rolls the dice and gets a score of 2, along with a Headshot (!). However, he is outnumbered by 2 Walkers, rolling 3 dice. This results in a total of 3 successes. This unfortunately beats Brian's roll, despite his lucky headshot, so Brian is the loser and is moved back 1". The difference in the scores is 1, so Brian's health counter is moved one place to the right.

4. End Phase

In this last phase of the turn, it's time to see if you have done enough to win! However, first you need to see if you've done enough to keep the Walkers down.

For each prone Walker on the board, roll a black die. If you roll a skull, the Walker model is placed upright again, and will be free to act next turn. On a blank, it stays prone.

Now you can check for victory. In this starter game, victory is achieved when Brian is holding all three of the supply counters at the end of the turn. If he is killed, the game is over.

Tutorial – End Phase 1

Your first End phase should be very quick, as you won't have had time to win yet. All you need to do is roll for any prone Walkers.

In our example game, there are no prone Walkers, so there are no dice to roll. Brian also hasn't been able to collect the supply counters yet, so he'll have to play another turn to get closer to victory.

Turn 2

In this turn you will be able to reach the Supplies, so you'll need to learn about a new Action type – Search.

Search

The Search Action allows a Survivor to collect a single supply counter, and find any useful resources that might be hidden there. To Search,

  • The Searching model must be in contact with the counter.
  • Neither the Searching model nor the counter can be touching an enemy.

When a Survivor searches a counter, take it and place it on their Survivor card to show that they are carrying it.

Then, draw the top card from the Supply Deck to see what else you've found. Most cards in this deck represent equipment that can be used by the Survivor in the game. Some however will cause an Incident! The instructions for these will be detailed on the card. Ignore any reference to the Bitten rule for now.

Equipment

Equipment cards are placed next to your Survivor card, and will have text explaining how they are used. Most common will be Melee Weapons that add dice to your attack roll in the Melee phase, so you will be more likely to beat your opponent. A Survivor may only use one Melee Weapon at a time.

Attacking Prone Models

The final rule that you may come across in your second turn is the ability to attack models that are already on the ground. If you do this, the prone model may only defend in Melee. If it loses the Melee, it is automatically removed from the table.

Tutorial – Turn 2

Now you know the basics, try a few more turns until you manage to collect all the supply counters, or die trying! When you're finished, play the whole game through again, trying different tactics. Once you're confident with the rules, it's time to move on to the second part of the story. Here's how we got on in our game:

  1. Action Phase: Brian decides to Sneak, to avoid drawing Walkers after him. He moves to the far side of the centre counter, to put himself out of the Kill Zones of the nearby Walkers. His second Action is to Search, so he takes the supply counter and places it on his Survivor card. He draws a supply card, revealing 'Hunting Knife', and places it next to his Survivor card.
  2. Event Phase: Brian has successfully avoided the deadly Kill Zones, and draws an Event card straight away. 'Pandemonium' is revealed, increasing the Threat to 4. We are now at Low Threat, and so the second result on the card is resolved. Firstly, a blue die is rolled to move the Walkers. The die rolls a 1. Brian chooses Walker B and moves it towards him, stopping when it reaches him. Secondly, a white die is rolled, resulting in a 1 – one new Walker (D) is placed at the edge of the gaming area in a position of the player's choice.
  3. Melee Phase: In the Melee phase, again there is Melee, so the Threat is increased to 5. Armed with a Hunting Knife granting an extra red die, this time Brian is able to defeat Walker B. He hasn't rolled a Headshot though, so the Walker is just knocked to the floor.
  4. End Phase: In the End phase, a blank is rolled for the prone Walker and luckily it stays down for now. Finally, checking the victory conditions, Brian still has two counters to collect, so he will need to survive a few more turns before he can win.

There are many different tactics you can try. In hindsight, it may have been better not to Run into danger in the first turn; a more cautious approach could have evaded the Walkers' attention for longer. Brian will have his work cut out collecting those last supplies!

The Prelude to Woodbury – Part 2

Brian is not yet the villainous leader he will become. He lives in the shadow of his brother Philip, who has led the group to Wiltshire Estates, an upper-class gated community. Philip has sent Brian out to explore the streets and come back with something they can use to survive.

Setup

You will need to set up the game as follows:

  1. Define a 15" x 15" playing area on a flat surface.
  2. Gather the components in the diagram below. Note that this time, Brian will start the game with an item already equipped.
  3. Place the scenery pieces, supply counters, Survivor model and Walker models onto the playing area in the positions shown. There should be one supply counter in the centre of the board, and one scenery piece in each quarter. There may be no scenery within 4" of Brian.
  4. Shuffle the Event and Supply card decks and place them face-down at the side of the gaming area. You will still be using the limited Event deck, but you can use the full Supply deck for this game – shuffle the extra cards back in.
  5. Put the Walker Reference Card, Threat Tracker, Range Ruler, Kill Zone template and dice within easy reach.
  6. Turn the dial on the Threat Tracker to position 1.

This game will use a few more rules than last time – we'll go through these now.

Scenery

In this game you will see that there is scenery on the table – cars and barriers.

Scenery cannot be moved through by any model. Survivors can move around it freely, but as Walkers always move in straight lines, they will stop whenever they hit a scenery piece. This can be used to the Survivor's advantage, by using the scenery to hold back the Walkers' advance when NOISE is made.

Walkers already in contact with scenery at the start of their move will move around it by the shortest route possible.

Events

If the Event deck runs out, shuffle it and place it face down so that you can run through it again.

New Action – Shoot

If a Survivor has a Ranged Weapon, it can use this Action to fire it at any unengaged enemy within range and line of sight. A Survivor may only use one Ranged Weapon at a time.

Range

The range of the weapons in this game is 10" – use the range ruler and measure from the edge of the shooter's base to the nearest edge of the enemy's base to check that a target is close enough.

Line of Sight

To check line of sight, simply draw an imaginary straight line from the centre of the shooter's base to the centre of the target's base – if another standing model's base breaks that line, the target is obscured and cannot be shot. Otherwise, the target can be seen and shot at.

Ranged Attack Roll

Once you have a target, the Shooting attack is done in the same way as a Melee attack. The shooting model takes the dice listed on the weapon card, adds the dice from their Shoot value, and rolls them all together. The target model then makes a Defense roll.

The results are compared, and the target model will take damage equal to the difference, just like a melee attack. If the Defense roll was higher than the Shoot roll, no damage is done. Headshots will affect the target as usual.

Out of Ammo!

If a ranged attack roll includes any Headshots, you must immediately roll a black die. On a skull, there is no effect. On a blank, however, you've just fired your last round! Resolve this shot as normal, but the weapon may not be fired again until you find more ammo and reload.

Cover

Scenery does not block line of sight although it does provide a Defense bonus.

  • For each barrier that the shot passes over, the target adds a red die to their defense roll.
  • For each car that the shot passes over, the target adds a white die to their defense roll.

MAYHEM

Now that there are guns in play, there will be a lot more noise to draw the Walkers. Louder noises such as gunshots are called MAYHEM, and weapons that cause MAYHEM will have this on their card.

MAYHEM works like NOISE, but instead of drawing the closest Walker it will draw every eligible Walker within 10". In addition, it will raise the Threat Level by 1.

New Action – Hold Nerve

This Action allows a model to reduce the Threat Level, to try and limit the effect of the dangerous Event cards. The model rolls a black die – on a skull, reduce the current Threat Level by 1.

Victory

In this scenario, Brian will win if he can collect all five supply counters and then return to the board edge that he started the game from. If he is killed, the game is over.

You will find that these extra rules will add a lot more depth to your games, and every game will be different. Guns can be very powerful, but don't underestimate the trouble that MAYHEM can cause for Brian – it's important to get him into the right position before shooting, and make good use of the scenery and Hold Your Nerve Action. It's worth playing through a few times, trying different things each time.

New Rules – Example

Brian is surrounded by Walkers. He is armed with a Beretta 92, and uses an Action to shoot at Walker A, who is 6" away and therefore in range.

The pistol rolls a white die, and Brian adds his Shoot value of a white die to the roll. The Walker has a Defense value of a red die to ignore the attack, and because Brian is shooting over a car to hit it, the Walker can add a bonus white die to the roll.

Brian rolls a total of 2 successes, and the Walker rolls 1. The difference is 1, and so the Walker takes one damage and is knocked to the ground. Brian did not roll a Headshot, so the Walker may get back up later.

As detailed on the card, Brian's gun causes MAYHEM. This will cause both remaining nearby Walkers to move directly towards him. Walker B comes into contact with the car, and stops in its tracks. Walker C moves directly into Brian, and will fight him in the Melee phase later.

Finally, the MAYHEM increases the Threat Level by 1.

The Prelude to Woodbury – Part 3

Philip is dead, and Brian has become the leader of Woodbury. However, he needs a way to inspire loyalty in his people. He has discovered that they love the spectacle of arena combat, with the added threat of chained Walkers, but of course that means that someone has to chain them up in the first place…

Setup

You will need to set up the game as follows:

  1. Define a 15" x 15" playing area on a flat surface.
  2. Gather the components in the diagram below. Again, Brian will start the game with items already equipped.
  3. Place the scenery pieces, supply counters, Survivor model and Walker models onto the playing area in the positions shown.
  4. Shuffle the Event and Supply card decks and place them face-down at the side of the gaming area. You will still need only the limited Event deck.
  5. Put the Walker reference card, Threat Tracker, Range Ruler, Kill Zone template and dice within easy reach.
  6. Turn the dial on the Threat Tracker to position 1.

New Rules

This game will again use a few more rules than last time – we'll go through these now.

Equipment Slots

Survivors can only carry a limited amount of equipment, represented by the empty slots around their Survivor card that each hold one item card. Brian starts this game with four of his slots already filled.

There are two slots to represent the model's hands, each holding a single Ranged Weapon, Melee Weapon or Special Item. Each of the armor slots can hold one item of the appropriate type, head or body. Finally, a Survivor's pack can be used to store any item type.

Weapons and armor need to be in the hand or armor slots to use them. Special Items like Bandages may be used while in a pack slot.

If a Search Action causes a Survivor to pick up an item that they have no room for, they must either discard it, or discard an item they are already holding.

If a Survivor wishes to transfer an item from their pack to their hands or vice versa, they must spend an Action to swap items between slots.

When you purchase other expansions and boosters in the range you will grow your collection of equipment cards to tool up your characters.

New Action – Make NOISE

This Action allows a Survivor to shout out, causing NOISE. This is useful for drawing Walkers around the table. In this third scenario, as you actually need to get close to the Walkers, you may find this a very useful tactic!

Bites

Rather than achieving a Headshot, if Walkers successfully win a melee and roll one or more !, the Survivor is bitten. Immediately flip the victim's health counter over so that the red Bite symbol is face up.

At the end of each turn, after rolling for prone Walkers, roll a black die. On a skull the Survivor is unharmed, but on a blank they lose 1 health point from the infection.

Scenario Special Rules

This scenario has a unique objective, and works a little differently to a regular game. Brian is trying to capture the Walkers, and get them back to his truck.

Capturing Walkers

To capture a Walker, Brian must defeat it in melee. Brian may choose not to count any Headshots he scores in melee in this scenario – he is not trying to kill the Walkers. Instead of laying the defeated Walker prone, replace it with a Captured Walker counter in contact with Brian. This represents him dragging the body, and the counter is moved around with Brian as he moves. It can be moved through by Walkers, but they cannot stop on top of it.

While dragging the Walker, Brian may only move at a Sneak, and may only defend in melee.

At the start of every Event phase, after checking Kill Zones, the Captured Walker will make NOISE.

Once in contact with the truck, Brian can use an Action to push the Walker into the vehicle. Place the counter on the truck. It will no longer make NOISE, and Brian can act normally from here on.

Brian can choose to move away from a Captured Walker, leaving it behind. As soon as he is no longer in contact with it, replace it with a prone Walker, from which point it will act like any other.

Victory

In this scenario, Brian will win if he can get 4 Captured Walkers into the truck before the Threat Tracker reaches maximum. If the Threat Level reaches 18, or Brian is killed, the game is over.

This scenario is quite a bit tougher than the previous ones, and may take you a few tries before you succeed.

Solo Play Quick Reference

Note: Only use this reference sheet for single-player games. Some of these rules are not in this starter set, and will only apply when using the fully expanded rules from the core set.

Turn Sequence

1. Action Phase

  1. Player activates a model. The model may perform up to 2 different Actions.
  2. Continue activating models until all models have been activated.

2. Event Phase

  1. Walkers will attack the closest Survivor in their Kill Zone.
  2. Draw an Event Card. Make any Threat Increase at the top, then resolve section of the card matching the Threat Level.

3. Melee Phase

  1. If there is any melee, increase Threat Level by 1.
  2. Split combats so that only one model is on one or both sides. All models must fight.
  3. Resolve melees one at a time.

4. End Phase

  1. Roll a black die for each prone Walker. Skull = it stands up, blank = no effect.
  2. Roll a black die for each Bitten model. Skull = no effect, blank = lose 1 health.
  3. Resolve any "end of turn" effects.
  4. Check scenario for victory conditions.
  5. Increase Threat by 1.
  6. Start a new turn.

Panic

Important: Check before activating a model. If Threat > Nerve, model is Panicking. Roll the Panic die.

  • Flee!: Run 8" in a straight line, directly away from the nearest enemy. Take no further Actions.
  • Terrified!: Only perform one Action this turn.
  • Quiet!: Only perform one Action this turn, and it may not cause NOISE or MAYHEM.
  • Scream!: Make NOISE, then take one more Action. +1 Threat.
  • Berserk!: Act normally, and add a red die to melee attack. +1 Threat.

Actions

  • Move
  • Search
  • Stand Up
  • Swap Item
  • Special Action (from cards etc.)
  • Shoot
  • Hide
  • Hold Your Nerve
  • Make NOISE

Move

ActionMax DistanceAdditional Effects
Sneak4"None
Run8"Creates NOISE

Climb Test: Roll a black die. Skull = success, blank ends Move. Runners pass automatically.

Shoot

Important: A model may only shoot if it has a Ranged Weapon.

Line of Sight: Drawn from centre of shooter's base to centre of target's base. Models block line of sight. Scenery provides Cover (see below) to standing models, and blocks line of sight to prone models.

Attack Roll

  • Shooter rolls dice from Weapon card and model's Shoot value.
  • Walker rolls dice from its Defense value, adding Cover if appropriate:
    • for each barrier passed over, a red die.
    • for each car passed over, a white die.
  • Total success symbols on both sides.
  • If the shooter has more success symbols, the Walker is laid prone.
  • If the Walker has more, or it is a draw, no effect.
  • Resolve any NOISE or MAYHEM caused by the shot.
  • Note: A Survivor may shoot into melee. Roll before the attack roll to see who you hit. Intended target = hit; blank = own model.

Headshots (!) (page 14)

  • Against Survivors, each ! inflicts one extra damage.
  • If the attack kills the Survivor, they are removed and cannot come back as a Walker.
  • Against Walkers, any ! will remove the model permanently if it takes any damage.
  • Any Survivor that rolls a ! with a Ranged Weapon must then roll a black die. Skull = no effect, blank = out of ammo – the weapon cannot fire until reloaded.
  • Only one ! may be allocated to each model in melee.

Noise and Mayhem

Important: NOISE and MAYHEM are resolved immediately after any Action that causes them, before other Actions.

  • NOISE: Closest eligible Walker within 10" moves towards the NOISE.
  • MAYHEM: Add 1 to the Threat Level, then all eligible Walkers within 10" move towards the MAYHEM.

Other Actions

  • Search: Take one supply counter in base contact.
    • Neither the counter nor the searching model may be touching an enemy.
    • Draw top card of Supply deck unless SEARCHED side is showing.
    • Resolve Incident! cards immediately, otherwise take equipment.
  • Hide: Lay the model prone.
    • Model must be in contact with scenery and have no enemies in their Kill Zone.
  • Stand Up: Stand a prone model upright.
  • Hold Nerve: Roll a black die. Skull = reduce Threat Level by 1, blank = no effect.
    • Cannot be done if model is Panicking.
  • Make NOISE: Model makes NOISE.
  • Swap Items: Model may move items between slots, and give items to friendly Survivors in its Kill Zone.

Moving Walkers

  • An eligible Walker is one that is standing and unengaged.
  • Walkers always move 6" in straight lines.
  • Walkers will stop if they hit scenery or a Survivor, but may move through other Walkers.
  • Walkers already in contact with scenery will move around it by the shortest possible route.
  • Each Walker may only be moved once per Event card (including Walkers entering play).
  • If there are too few eligible Walkers to fulfill an instruction, any surplus enter play.
  • When a card says "Walkers enter play", they must be placed in contact with any table edge, not within a Survivor's Kill Zone.

Resolving Melee

  • Handgun Attacks: Models with a Handgun may fire it in melee before rolling. Resolve this like a Shoot Action – MAYHEM occurs as normal. If the shooter is still in melee after the shot, it may only defend.
  • Attack/Defend: Survivors choose to attack or defend, rolling their Melee or Defense dice respectively.
    • All models on the same side do the same.
    • Models with no Melee dice must defend.
    • Walkers always attack.
  • Bites: If Walkers cause damage and roll any !, the Survivor is bitten – turn over its Health counter.
  • Prone Combatants: Prone models may only defend. If they take damage, they are permanently removed.
  • Barriers: A Survivor fighting an enemy on the other side of a barrier gains a bonus (a red die) if it defends.

Melee Roll

  • Each side adds up all dice from Melee or Defense values and any equipment that grants extra dice, rolling them together.
  • Total success symbols on both sides. The side with the most is the winner.
    • In a draw, Survivors beat Walkers.
  • All models on the losing side are pushed back 1".
  • If the winners were attacking, the losing side loses health equal to the difference in rolls, distributed as the winning player chooses.
  • If the winners were defending, there is no effect.
  • 4. End Phase
    • Tutorial – End Phase 1