Walcheren 1809
Walcheren 1809 Rulebook
Table of Contents
Table of Contents
1.0 Game System
1.1 Game Components
Walcheren 1809 contains the following components [you need one six-sided dice (d6) - not included].
- One A3 DIN shape map
- One Rulebook
- One sheet of playing pieces
1.2 The Map
The map scale is about 1:83,000. Each 18 mm hex is about 800 meters from side to side.
Each hex has a four-digit code printed on it, used for setting up the units prior to play (see Initial Set Up in the Scenario Information for the actual locations).
The map represents the Southern part of the Walcheren Island and the fortress of Flushing (Flessingue or Vlissingen), the theatre of the battle.
1.3 The Playing Pieces
The playing pieces are of three types: infantry, artillery pieces and leaders (double side counters). The game utilizes also some markers (single sided).
1.31 Leaders
Leaders are color-coded for nationality, display their name may give some Bonuses to the operations with their Leader Value (LV). Two Stars indicate a Lieutenant-General (Division commander), one Star a Brigadier (Major General) and no Star a Garrison Commander. In a circle (top right of the counter) is the Command Range (in # of hexes).
1.311 British Leaders
There are four British Leaders, each commanding a Field Column abd representing the Right, Left Flanks, the Centre and the Reserve of the Order of Battle.
1.312 What the Leaders do?
They Command a Force (a Column) and have a Command Range, the distance in hexes from the Leader and a unit, which is considered to be in command. Leaders have a weaker side (verso), which comes in play when a Leader is wounded or ill. All units which are in the Leader's Command Range may utilize some Bonus from its leader. Units which are out of the Command Range cannot have Bonuses.
Exception: artillery batteries must have leader stacked in order to receive the bonus.
Clarification: a leader may add his bonus only to a Combat per turn. Indicate his commitment with a marker. A leader always adds (subtracts) his Bonus in every Wellness Check).
1.313 The disbelieving General Monnet
General Monnet, Louis Claude Monnet de Lorbeau, acts as French Supreme and exclusive commander. He has a Command Range and a Bonus like other leaders. His backside, however, is different from other leaders, and shows a punctuation mark.
This is the "hesitant" side of the old general. At the beginning of each game-turn (the first daylight turn), the French player must throw a die (1d6).
- If the obtained result is 1-2 or 3, general Monnet plays with his faithful front-side (recto),
- if the die gives a 4-5-6 the general flips to his backside (verso).
- Whenever a British units comes at a distance of 3 hexes (or less) from one of the four Flushing hexes (2608-2609-2708-2709), the French player must add 1 to his die-roll.
- the British Player can force the surrender of the fortress of Flushing only if general Monnet is currently in his back-mode (see Victory Rules).
- the French Player may move Monnet himself and may begin dams demolitions attempts only if general Monnet plays with his front-side (see Logistics).
1.314 Leaders casualties
Leaders move like an infantry unit, must always move stacked with friendly units. If they remain alone in an hex, they must reach the nearest friendly unit and attach to it.
Leaders can be targeted and hit in combat or suffer a disease status. In this case the counter flips on his back side.
Leaders can be hit in combat or suffer a disease status while playing with their back-sides. In this case they are removed from play.
Exception: The later occurrence does not apply to general Monnet. He cannot abandon the play, but he will play in his back-mode for the rest of the game.
Clarification: a leader remains alone in an hex when all friendly units have just left the map after a check, a bombardment or a melée. The leader involved will retreat up to the next friendly stack following the retreats' general rules.
1.32 Fortress Gun batteries and Guns
Fortresses batteries are indicated by a map symbol on some fortress' hexes, with their Bombardment Range value (which indicates also their strength). The Fortress can suffer up to two Levels of damage.
Mark the first damage done on a battery-hex with a 1st Level Damage marker and considered the battery gunnery strength as having a -1 Die roll Modifier.. By the second damage suffered put a Second Level of Damage Marker; and considered the battery gunnery strength as having a -2 Die roll Modifier.
1.321 Artillery units.
Artillery units represent batteries, half batteries or rockets-sections, which can be moved and may combat (bombard).
Artillery units move:
- 3 hexes on a road-trail;
- 1 hex in clear terrain.
The artillery counters have the historical name of the unit or a generic denomination; the range in hexes is the number in the lower left corner; the strength of the unit is the number in the lower right corner. The number in the Circle is the common "Wellness" value, which all units do have.
1.33 Infantry Units
Infantry units represent group of soldiers and/or Militia of around 100 men per strength point. Units have their historical names of names of their regiments and battalions.
They issue the National colours (Blue for France, Red for Britain and White for Holland or Batavian Republic). The lower value is the Strength of the unit and the value in the circle is its "Wellness value", which means fitness, wealth, training and morale.
1.34 The Wellness Value
The "Wellness value" does mean fitness, wealth, training and morale. It also is the defensive value of units.
Units have a back-side which generally is weaker in Strength Points, in order to indicate a loss of strength. The Wellness value of some particular units can be better on the back-side.
This indicates a better defense value due to the veteran status (British) of troops now free from soldiers weakened by some diseases like Malaria.
French generally have weaker Wellness Values on their backsides, because they were units gathered with prisoners, deserters and civilians .. not élite. The backside checks, however, are encouraging the French, who better managed the territory.
1.35 Markers
Markers are placed on the map to indicate the status of units; they are depicted in the rules where their use is explained.
1.4 Tracks and Logs
Some tracks help the players to record the game events. They can be found in map. On the game map there are:
- the Turn Record Track which helps to record the game-turns (days) of the battle.
2.0 Sequence of Play
2.1 Game-Turns
Each Day represents a Game-Turn. Each Day is divided into
- two daylight Rounds,
- which are divided into Phases.
The Turn ends at the end of each single day. The Rounds end with the Combat Phase.
Some Phases will occur only at the beginning of a Day (Game-Turn – first Round) or at its end (second Round of a Game Turn end of the Day). These special Phases have a blue background.
2.2 Game Sequence
1 – GENERAL MONNET. Determine the daymood of general Monnet throwing a die as per 1.313.
1 – FRENCH LOGISTICS. Begin Demolition-Construction tasks as needed. Check the Wellness as appropriate for workers and for French units in EZOC.
2 – MOVEMENT Phase. British player (first) moves all units he wants to move and checks their wellness after each move. French player (after) moves all units he wants to move and do not check any wellness at this point.
3 – BOMBARDMENT Phase. British Player (First) may conduct artillery attacks. Then the French player will do the same.
4 – GROUND COMBAT Phase. French player (first) may conduct fire/melée attacks or order retreats as appropriate. British player, then, may conduct fire/melée attacks but cannot order retreats.
5 – END TURN and VICTORY Check Phase. The British Player may try to recover the ill units at the turn which ends a day of the campaign. Both Players check in the Fortress surrenders.
3.0 Terrain
Walcheren was a swampy island of at the mouth of river Scheldt as well as South Beveland island, both in the present-day Netherlands.
In the gane there are essentially two kinds of terrain:
- Roads and trails
- Fields (mostly swampy and cut by many water channels)
The "costs" of the terrains in term of Movement Points are respectively 1 for Road/Trails and 2 for Fields.
3.1 Map Elements
3.11 Dams (dykes)
The Netherlands has about two thirds of the country vulnerable to flooding. Natural sand dunes and man made dykes, dams and floodgates provide defense against storm surges from the sea. River dykes prevent flooding from water flowing into the country by the major rivers, while a complicated system of drainage ditches, canals and pumping stations (historically: windmills) keep the low lying parts dry for habitation and agriculture.
Dams do not provide any Bonus/Malus in terms of Combat/Movement activities. Simply ignore them.
3.12 Flushing Fortress Dams System
The Fortress was protected by a system of dams and sand dykes, which could have been broken, at some points, in order to generate a flooding area, able to protect the town. When an explosive charge destroyed that points, the river water went into the fields, hardly hampering the operations against the Fortress. The mined points are localized (in map) by a Red Arrow. In the case the French would be able to explode mine charges (Logistic Phase), the terrain around Flushing will be considered as flooded.
During the set-up the French Player puts the three Dyke Markers on the red arrows to indicate the dykes are unbroken.
An explosion marker will be put on a Red Arrow by the French Player to record the destruction, fullfilling the appropriate procedure. The explosions can flood their respective areas.
The "eventually to-be-flooded" terrain is divided in a right and in a left sectors, by the major road to Middelburg, being the Fortress in the center. To flood the left sector is enough a single charge explosion on the left red arrow. To flood the right sector it will be necessary to produce two explosions on the two red arrows, right of Flushing.
The "costs" of the flooded terrains in term of Movement Points will be respectively 2 for Road/Trails and 3 for Fields.
3.13 Woods and Villages
There are some sparse wood in the map and some small villages. They are both only chrome and must be ignored. Treat them as Field terrain.
3.14 Field Fortifications
Red lines in map indicate the hex as fortified (together with the two fortresses towns of Middelburg and Flushing). These terrains, along with hexes bearing the Entrenchments or Fleches markers grant some defensive bonuses in combat for the French player (only).
3.15 Entry Areas
British units and French reinforcements enter the map in special hexes called Entry Areas. The British EA are on the top of the map (North) and are named by the Commander of the incoming Column. They point on a connecting road.
The French EA is a Blue Arrow which is practically the port of Flushing (French troops did come by boats). It points directly inside the Fortress.
4.0 Logistics
4.1 French Pioneers and Engineers
The French Player has some Pioneers and Engineers units, They act as a normal units, moving and fighting if necessary. They, however, can refuse to move in order to build or demolish something on the battlefield.
Exception: the Colonial French battalion is to be considered an engineers unit. See NOTE in the Setup.
4.11 Building Field Fortifications
One Pioneer or Engineer unit may stop in an hex for a whole game-day, without moving, in order to build/destroy something.
- a – works begin always during the first of the two day rounds. Put a general Work 1 marker on the unit.
- b – in order to begin works a French Pioneer or Engineer unit must check its Wellness.
- c – during the second of the Day turn a second Wellness check is required.
After having passed the two check and if the unit did not move (abandon the works) for a whole day, the task will be completed.
4.12 Entrenchments or Fleches
A Fleche was an earthwork consisting of two berms forming an angle with an open gorge, able to cover defending troops.
A Pioneer or Engineer unit which builds a Fleche, after two complete turns puts its markers on the hex. This hex, for the rest of the game till its eventual demolition, will act as a fortification for French player (only).
The effect of a Fleche on combats is:
- defender unit is doubled
4.13 Bridges
Every road which crosses a waterchannel is consi-dered to be a bridge; those bridges allow units to continue their road moves. Bridges can be destroyed and repaired by Pioneer or Engineer French units.
Note: All British units cannot destroy bridges, but may repair them.
- To build/destroy a bridge a unit must stop in an hex for a whole game-day, then putting on map the appropriate bridge marker.
4.2 Demolition Tasks
Pioneer or Engineer French units may destroy bridges and may try to break dams in order to create a flood area around Flushing. They may also repair holes in dykes if appropriate. They could even destroy Fleches, but it would be a stupid thing to do.
Note: All British units may repair bridges but not dykes. They however may destroy Fleches.
- to destroy a bridge/dam a unit must stop in an hex for a whole game-day, then putting on map the appropriate bridge/dam marker
- the French Player can begin dams demolitions attempts only if general Monnet is in his frontside during the turn in which the demolition order is issued.
- a bridge destroyed creates a road interruption (the hex becomes a Field terrain hex).
- a bridge repaired removes the road block.
- a dam destroyed generates a flooded area (see 3.12). A dam repaired allows the flooded area to return dry.
4.21 British mining
All British units may repair bridges but not dykes. They however may destroy Fleches and damage fortresses walls.
A common British unit (not leader) must stay in an hex which contains or is adjacent to the building to destroy/repair for a whole day, resisting to enemy attacks.
To do so the British player chooses an unit and puts an appropriate marker on it during the first daylight Round of the turn.
At the end of the second daylight Round of the turn, if the chosen unit is always in its work-place, the repair/destruction is operative.
4.211 Damaging walls
Walls are never destroyed. The first mining operation cause a 1st Level damage, a second one can add a 2nd Level of damage. (see after).
4.22 Attacks against Workers
4.221 Defence of the logistics
French Pioneers or Engineers may be attacked by enemies only if they are alone in the building/destroying hex. In every other occurrence only the other stacked friendly unit (and leader if present) does suffer the attack.
British units can be attacked normally.
4.222 Abandoning works
The current logistic work must be abandoned only if the Pioneers or Engineers unit is forced to leave the map, and not if it flips on its backside.
4.3 Wellness Checks
4.31 French Checks
During the French Logistic Phase all French units must check their Wellness (Morale) being:
- pinned in works tasks (building or destroying something) see 4.11
- adjacent to enemy units (in EZOC).
French do check also when retreating after a combat result (see after) and after bombardment/combat results.
4.301 French units in EZOC
French/Batavian units adjacent to enemy units must check their wellness during the Logistic Phase in order to evaluate if they will perform the order to withstand the enemy or if they will be tempted to desert.
If the Check fails the French unit is turned on its backside (or eliminated if it doesn't have it).
4.302 French do not chech when ...
- moving (movement phase)
- retreating before combat (combat phase)
4.32 French Wellness Check Procedure
For each unit involved:
- a -- The French player rolls a die;
- b – adds his Leader Bonus to the result if the unit is in command
- c – matches the result with unit's Wellness Value
- d – if the modified die roll is higher than the Wellness Value there is no effect.
- e - if the modified die roll is lower (or equal to) than the Wellness Value the unit must flip on its back-side (and sometimes must also retreat).
Flipping on the back-side do not force units to abandon logistic tasks, but weakens them.
Note: a unit already acting with its back-side, which fails the Wellness Check, must abandon the map (deserters). It is eliminated.
4.33 British Wellness Check
British units must check their Wellness:
- when marching (see Attrition)
- when working (as per French)
- when suffering a bombardment/combat result
- and/or when retreating after combat result
They haven't to check their Wellness if in EZOC before the movement phase..
4.34 British Check Procedure
For each unit involved:
- a -- The British player rolls a die;
- b – adds eventual Leader Bonus to the result
- c – matches the result with unit's Wellness Value
- d – if the modified die roll is higher than the Wellness Value there is no effect.
- e .-- if the modified die roll is lower (or equal to) than the Wellness Value the unit must flip on its back-side.
Note: a unit in map with its back-side, which fails the Wellness Check, must abandon the map. It is eliminated.
5.0 Movement, Phase
5.1 Moving units
All kinds of infantry units (leaders too) can move :
- up to 5 hexes by road.
- Artillery moves 3 hexes in road/trail.
Water channels can be crossed only at bridges.
The "costs" of the terrains in term of Movement Points are respectively 1 for Road/ Trails/ Woods/ Villages/ Forts and 2 for open Fields.
- So all kinds of infantry units (leaders too) can move up to 2 hexes in open fields.
- Artillery moves 1 hex in open Field.
The "costs" of the flooded terrains in term of Movement Points are respectively 2 for Road/Trails and 3 for Fields. So all kinds of infantry units (leaders too) can move
- up to 2 hexes in flooded roads.
- Artillery moves 1 hex in flooded roads.
If moving a unit becomes adjacent to an enemy unit, it must stop the movement. Their movements may end with an attack or no combats.
5.2 Zone of Control (ZOCs)
All six hexes adjacent to a combat unit (not leaders) are considered Zone of Control of the unit. A waterchannel on the hexside do not block ZOCs.
5.21 Village and Forts
Unit's ZOCs do not extend inside Forts, Fleches or Fortresses. They do extend themselves inside villages and towns.
5.211 Fortresses
Single infantry units in Forts are not affected by enemy ZOCs and cannot be bombarded. They are never required to attack, but have normal ZOCs and can be attacked if the fortress has some damage. They do not retreat after a combat result.
5.22 Leaders and ZOCs
A leader does not have any ZOC. He may not enter alone an EZOC but a leader may move and retreat after combat from EZOC to EZOC if each hex is occupied by friendly combat units.
5.23 EZOCs
EZOCs are Enemy ZOCs. The presence of a friendly unit in an EZOC does not negate the EZOC effect. Units that start moving in EZOCs can only leave it by advance after combat and retreats. They cannot leave them by normal movement.
5.3 Stacking limits
Players may stack up to (2) two friendly combat units per road/trail and open Field hex. Stacking limits are checked at the end of each Movement.
Leaders do not count for stacking.
5.31 Fortresses and stacking
Players may stack up to (4) four friendly combat units per Fortress hex. In the game the Fortress hexes are the four Flushing hexes (2608-2609-2708-2709), and the two Middelburg hexes (1612-1711). Leaders do not count for stacking.
5.32 Fortification, Fleches stacking
Players may stack up to (1) one friendly combat units per Fleches/Fortification hex. Leaders do not count for stacking.
5.33 Reinforcements and Stacking
When more than one combat unit is scheduled to arrive at the same entry hex in the same turn, they may arrive stacked as long as they do not violate the stacking limit.
French reinforcements may noy violate the stacking limits of Flushing hexes or their arrive must be delayed.
5.4 March Attrition
The Walcheren Expedition of 1809 was arguably the single worst disaster to befall Britain during the entire French Revolutionary and Napoleonic wars. Conceived by Britain's Foreign Secretary Lord Castlereagh as a way of supporting Britain's embattled European allies against Napoleon, the expedition saw an army of 40,000 land on the inhospitable and marshy Dutch terrain around Flushing. There was fighting with the French, but the worst casualties were inflicted by disease. Dysentery and other infectious illnesses arising from the unhealthy swampland killed thousands and incapacitated many more, causing the abandonment of the inglorious expedition.
The British lost over 4,000 men to a disease called "Walcheren Fever", thought to be a combination of malaria and typhus.
5.41 March Attrition
British troops must check their Wellness Status at the end of their movement if they moved for:
- 3-4-5 hexes in normal Road/Trail movement. 3 hexes for artillery.
- 2 hexes in open Field movement. 1 hex for artillery.
- 2 hexes in flooded Road mode. 1 hex for artillery.
British units adjacent to enemy units must not check their Wellness if they have not moved as described above. The same rules do apply also for leaders. Each unit must check the Wellness also if stacked.
5.42 Checking Procedure
For each unit involved:
- a -- The British player rolls a die;
- b – adds eventual Leader Bonus to the result
- c – matches the result with unit's Wellness Value
- d – if the modified die roll is higher than the Wellness Value there is no effect.
- e .-- if the modified die roll is lower (or equal to) than the Wellness Value the unit must flip on its back-side.
- f – unit is immediately transferred to the British Convalescence Area map box in which it will remain till the end of the second turn of the day.
Note: a unit in map with its back-side, which fails the Wellness Check, must abandon the map. It is eliminated.
5.43 Rescuing units
The British Player may try to recover the ill units at the turn which ends a day of the campaign.
To do so he checks again the Wellness Value:
- a – if the die roll is higher than the Wellness Value the unit will return in play with its back-side during the following movement Phase. Put the recovered unit near its column's entry area to act as a reinforcement during the following morning.
- b -- if the die roll is lower (or equal to) than the Wellness Value the unit must enter the "no return" area, the map box with crossed bones, hoping in some future improvements of British Medicine. It is eliminated.
6.0 Bombardment
During the Bombardment Phase the two players may fire with artillery units and fortresses.
6.011 Gun Range and LOS
They may fire to adjacent targets or to targets which are in range (value on lower left corner). There are no LOS rules in the game. Intervening obstacles are considered not so disturbing and players can fire also with howitzers.
Exception: Fortress fixed batteries MUST fire inside their Arc of Fires, which begin with the two frontal hexes (imagine the battery oriented towards the hex angle and not the hex side of its hex). Note the central battery in Flushing can choose two Arcs of Fire.
6.012 Movement and Fire
All artillery units can fire, also if they have moved in the previous Phase.
Note: French artillery units which have fired, in Bombardment Phase, cannot retreat before Combat during the following Combat Phase
6.013 British effectiveness
French batteries took great advantage having fixed positions, while moving British gunners did not show same effectiveness.
A British unit is allowed to delay its fire procedure, and a marker will indicate that it had not fired during the bombardment phase. Keep the marker till the following bombardment phase. Now the artillery unit can:
- Fire with a Gunnery value doubled or
- Fire with a Gunnery value tripled if it has a Leader stacked with.
If in the following turn the artillery unit moves it loses the markers. Remember also to remove the markers after the bombardment. This procedure will be repeated every time the British player desires it.
Clarification: Practically if an artillery unity won't move anymore for the rest of the game, it doesn't mean that it will be always authorized to shoot with double or triple values. The marker is lost after a move or after a bombardment and can be issued again during the following bombardment Phase.
6.1 Artillery Fire procedure
a -- Check the unit Strength (Gunnery) (the lower right value) or add more units strength
b – Roll a d6 and add the eventual Leader Bonus if stacked with the battery. Then add eventual Point Blank Fire Bonuses (if adjacent targets).
c – check the results on the Artillery table.
| die | 1-2 | 3-4 | 5 | 6 | 7+ |
|---|---|---|---|---|---|
| 1 | • | • | • | Ch | Ch |
| 2 | • | • | Ch | Ch | F |
| 3-4 | • | Ch | Ch | F | E |
| 5-6 + | Ch | Ch | F | E | E |
The column headings (1-2, 3-4, 5, 6, 7+) are the Gunnery row of the table. Leader DRM: +# (the stacked leader's Leader Value is added to the die roll).
| Distance in hexes | Effects |
|---|---|
| 1 | point-blank fire +1 DRM |
| 2 | No modifier |
6.111 Results
- • = no effect, unuseful shooting.
Ch = Wellness Check if the target is a unit. No effect if the target is a Fortress. Apply to the topmost if enemy in stack.
F = Flip the counter on its back-side. If it has no back-side, eliminate it. Apply to the topmost if enemy in stack. If the target is a Fortress assign 1 LEVEL OF DAMAGE.
E = Eliminate the unit. Apply to the topmost if enemy in stack. If the target is a Fortress assign ONE GUN LOSS.
6.2 Fortress Gun batteries and Guns
Fortress batteries are indicated by a map symbol on some fortress' hexes, with their Bombardment Range value (which indicates also their strength).
When you attack a Fortress with guns consider that:
- Troops in fortress are never affected by enemy fire. They can be attacked only by infantry units when the Fortress has a damaged hex.
Put the Fixed Gun Markers in the Fortress, one marker for each strength point of the hex (ex. 2 for 2709 ecc.) . Each hex which loses all its Fixed Gun Markers cannot fire.
Important: Fortresses batteries can fire only during the Bombardment Phase (no Combat Phase allowed).
6.22 Fortress Walls
It is possible to conduct bombardment attacks or mining operations against fortresses' walls instead of batteries. In this case each hit scored will indicate a walls' damage, not a guns' damage.
Note: an undamaged Fortress cannot be attacked by Infantry.
6.221 Assigning hits
The Fortress can suffer up to two Levels of damage. Mark the first damage done on a wall (a fortress hex) or a battery-hex with a 1st Level Damage marker and considered the battery gunnery strength as having a -1 Die roll Modifier.
Note: a Fortress with One Damage Level can be assaulted by enemies but the Defender in the hex is Doubled.
By the second damage suffered put a 2nd Level of Damage marker on a wall (a fortress hex) or a battery-hex and consider the battery gunnery strength as having a -2 Die roll Modifier..
Note: a Fortress with Two Damage Levels can be assaulted by enemies and the Defender loses any Fortress' Bonus.
Clarification: all levels of damage, scored against fortresses' walls or against batteries can never be repaired.
7.0 Ground Combats
7.21 Infantry Combat
Infantry units can stop in an hex adjacent to the enemy in order to attack the opponents, but combat is never mandatory. Artillery can fire but only in the Bombardment Phase, so it is significantly exposed in the case of an infantry attack.
Infantry units can stop in an hex adjacent to the enemy in order to attack the opponents, but combat is never mandatory. Artillery can fire but only in the Bombardment Phase, so it is significantly exposed in the case of an infantry attack.
- During the Ground Combat Phase the French (who goes first) may refuse the combat and retreat up to 2 hexes without checking Vs. Wellness. Each attack made by a single unit must be checked separately. Each attack made by a single unit or stack must be checked separately.
7.22 Ground Combat Procedure
7.221 Who attacks and how
Always consider attacks as coming from one single hex. I.e. is not possible combine several forces in different hexes to create a single large attacking group.
Note: the terrain characteristics did not allow the use of cavalry or the organization of synchronized flank attacks.
7.222 Attacking with a stack
Attacks may be conducted combining a stack (in a single hex) as a single strike force. Simply add their strength values and use the total.
7.223 Attacking with single units
Attacks may also be conducted attacking with single units and resolving them in sequence, one by one.
- he (only if French) may refuse the combat and retreat up to 2 hexes without checking Vs. Wellness.
Each attack made by a single unit must be checked separately.
7.224 Targets
The attacks' targets are always single units, not stacks or hexes. The attacker player must declare which unit wants to attack.
Exception: see 4.321 for Pioneers and Engineers at work.
7.23 Attack Sequence
1 – Attacker declares his target unit.
2 – Attacker counts the Strength points involved (more than one unit may attack as a stack)
3 – Add the Leader/Terrain value modifier to the sum of the Strength points .
4 – Now the defender counts the Wellness points of the target unit involved.
| Number of Dice modifiers | unit |
|---|---|
| Commanding leader (attacker adds) (defender leader subtracts) | ± LV |
| defender in Fortification | -2 |
| defender in Fleche-Fortress with One Damage Level | doubled |
LV = Leader Value. All these values are cumulative.
(The magazine numbers the steps 1–4 and then 6; no step 5 is printed. The modifier table above appears between steps 4 and 6 as printed.)
6 – The attacking player gets his Modified Strength Value and subtracts the Modified Defender's Wellness.
- if the difference is zero the attack has no effect;
- if the difference is negative the defender wins and the attacker retreats two hexes away;
- if the difference is positive the attacker wins and checks effects;
7.24 Combat Results
If the attacker is the winner he will throw one die for each point of difference beyond the defender's sum (Ex. attacker = 8 and defender = 4; 8-4 = 4, attacker wins and will throw the die 4 times or 4 dice). Here a defender in Command can add his Leader Value as a negative DRM (ex. leader with 2 – rolling a 5 it becomes a 3 . Meaning 5-2=3).
- Every result of 4-5 will cause a Wellness check. and a one hex retreat
- Every result of 6 will cause losses (flip the counter on its back-side or eliminate it if alredy flipped) and a two hex retreat if applicable.
7.231 Advance after combat.
All attackers who force a defender's retreat may advance after combat inside the vacated hex.
7.25 Retreats
7.251 Directions of Retreat
The French must retreat towards the southern map edge (Flushing). The British must retreat towards the northern map edge or entry areas.
7.252 Limits of Retreats
Units may retreat inside any kind of hex, all but sea hexes. However they cannot go beyond stacking limits, when doing retreats.
7.253 Impossible Retreats
Units cannot retreat in hexes occupied by the enemy units. They can retreat across EZOCs if these are shared with friendly units.
Units cannot retreat or cross hexes occupied by friendly units if the stacking limits are surpassed during the retreat.
7.254 Surrender
Only units which are not able to retreat after a combat result (not after having chosen a voluntary retreat) surrender and are eliminated.
Note: units which choose a voluntary retreat realizing to be unable to retreat simply stay pinned and are not forced to combat.
7.255 Attrition of retreats
As for the march Attrition all units (French too) which retreat 2 hexes in open field must control their Wellness mode.
7.26 Infantry Vs. Artillery batteries
Artillery batteries attacked by enemy infantry defend with their Wellness value as any other unit.
If forced to retreat or if they remain alone in an hex from where a supporting infantry unit in stack was forced to retreat, they surrender.
7.27 Infantry against fortresses
An undamaged Fortress cannot be attacked by Infantry.
- a Fortress with One Damage Level can be assaulted by enemies but the Defender in the hex is Doubled.
- a Fortress with Two Damage Levels can be assaulted by enemies and the Defender loses any Fortress' Bonus.
8.0 How to Win
Victory is assigned to the British player by controlling the fortress of Flushing. The French player wins if in the Eliminated Units Box (in map) there are at least 10 British units (leaders excluded) and if he has the control of Flushing. Any other outcome is a draw.
8.1 Negotiation for the surrender
The surrender of the Fortress is automatic if:
- general Monnet is currently in his back-mode.
- a British leader is present (he is adjacent to a fortress hex)
- the French Garrison of Flushing (all fortress' hexes) is equal or inferior to a British force which is partially adjacent to the fortress hexes (mandatory condition. hexes 2507-2508-25092610-2710) and partially in hexes 2506-2408-2410 and 2611.
These conditions are checked at the End Turn Phase.
The surrender of the Fortress is also automatic if it is attacked and seized by British troops.
8.11 Negotiation with no British Leaders
They are possible if:
- general Monnet is currently in his back-mode.
- the French Garrison of Flushing (all fortress' hexes) is equal or inferior to a British force which is partially adjacent to the fortress hexes (mandatory condition. hexes 2507-2508-25092610-2710) and partially in hexes 2506-2408-2410 and 2611.
General Monnet checks Vs his current Wellness Value with a Die Roll Modifier of + 2. If he fails, the Fortress surrenders.
This modifier applies only if all Fortress hex are free from Level 2 Damage markers.
9.0 Initial Set-up
The set-up is printed as two tables. Where a row shows one hex code across both unit columns, the unit occupies that hex; where it shows two codes, the first is unit 1 and the second is unit 2.
Garrison July 1809 – FRENCH (set-up first)
Flushing Garrison
| Unit | Unit 1 – Str | Unit 2 – Str |
|---|---|---|
| 1e bat. Irish Legion | 2409 | 2609 |
| 2e bat. Reg. de Prusse | 2708 | 2708 |
| 3e bat. Reg. de Prusse | 2507 | 2709 |
| General Monnet | 2608 | |
| 1e bat. Coloniale * | 2007 | 2205 |
| Lévècque Company Engin. | 2509 | |
| Pioneers | 2011 | 1906 |
| Pioneers | 1612 | |
| Artillery battery – Str 1 |
* NOTE: 1e bat. Coloniale is a Pioneer battalion.
British Expeditionary Force – 9 August 1809
Commander: Lord Chatham (John Pitt) Second-in-Command: Sir Eyre Coote Chief-of-Staff: Sir Robert Brownrigg
Right Wing: Major General Graham
Colonel Day's Brigade – enter in this order from 1202 on August 9 AM in normal Road movement:
- 3/1st The Royal Regiment
- 1/5th Northumberland, General Graham
- 2/35th Sussex
- 1/68th Durham Light, Congreve Rockets Section
- Webber-Smith battery
Centre: Lieutenant General Lord Paget
Brigadier General Rottenburg's Light Infantry Brigade – enter in this order from 1206 on August 9 AM in normal Road movement:
- 1/68th Durham Light (II unit)
- 85th Light Bucks Volunteers
- Comp. 2/95th Rifles Light - 2
- Massey battery
Brigadier General Browne's Brigade – enter in this order from 1206 on August 9 PM in normal Road movement:
- 2/23rd Royal Welch Fusiliers
- 1/26th Cameron Highland, General Paget
- 1/32nd Cornwall
- 2/81st Loyal Lincoln Volunt.
Left Wing: Lieutenant General McKenzie Fraser
Major General Picton's Brigade – enter in this order from 1214 on August 10 AM in normal Road movement:
- 1/71st Glasgow Highland Light
- General Fraser
- 77th East Middlesex
- 1/36th Herefordshire
- March battery
Enter in this order from 1214 on August 10 PM in normal Road movement (the magazine prints no brigade name for this group):
- 2/63rd West Suffolk
- Battalion of Detachments
- Congreve Rockets Section
Reserve: Brigadier Houston's Brigade – enter in this order from 1211 on August 11 AM in normal Road movement:
- 2/14th Buckinghamshire
- 2/51st II Yorkshire W.Riding
- 1/82nd Prince of Wales' Volunt
- Adye Heavy battery (from Grosvenor division)
French Reinforcements
from Rampon, Chambarlhac and Rousseau – In Map from 4th August
| Unit | Arrival |
|---|---|
| Combined Reserve bat. | 2710 |
| 4e bat. 48e Line (Ligne) | 2006 |
| Artillery – Str 2 | 2006 |
Entry Hexes: 2708 – 2709 (Port)
| Unit | Arrival |
|---|---|
| 2e bat. 8e Demi-Brigade | August 9th – AM |
| 1e bat. 8e Demi-Brigade | August 9th – PM |
| Combined 48e Line (Ligne) | August 10th – AM |
total 6996 m and 17 horses