RulesPal
Chat
Rulebook
Volters Lead the Way! thumbnail

Volters Lead the Way!

Volters Lead the Way! Rulebook

Table of Contents

Table of Contents

  • A) Components
    • 1) Maps
    • 2) Volter Unit Counters
    • 3) Alien Unit Counters
    • 4) Miscellaneous Counters
    • 5) Action Cards
    • 6) Player Aid
    • 7) Opaque Container
  • B) Sequence of Play
    • 1) Doomsday Phase
    • 2) Fermitian Retaliation Phase
    • 3) Warlord/Kaots Patrol Phase
    • 4) Commander Assignment Phase
    • 5) Choose Active Company Phase
    • 6) Unit Activation Phase
    • 7) End Phase
  • C) Doomsday Phase
    • 1) Doomsday Timing
    • 2) Procedure
    • 3) Doomsday Device Marker Status
  • D) Fermitian Retaliation Phase
  • E) Warlord/Kaots Patrol Phase
    • 1) Warlord Patrol Movement
    • 2) Blocked Warlord Movement
    • 3) Kaot Mercs Warp Move
  • F) Commander Assignment Phase
    • 1) Commander Leads From the Front
    • 2) Commander Stays in Headquarters
  • G) Choose Active Company Phase
    • 1) Eligible Company
    • 2) Activation Procedure
  • H) Unit Activation Phase
    • 1) Activate First Unit
    • 2) Activate Next Unit
    • 3) Activate Last Unit
    • 4) Activate Next Company
  • I) Activation Descriptions
  • J) Unit Movement
    • 1) Normal Movement
    • 2) Swapping Columns
    • 3) Alien-Occupied Space
    • 4) Chasm Space
    • 5) Martian Canals
    • 6) Lunar Seas
    • 7) Doomsday Device Zone Space
  • K) Fire Combat
    • 1) Volter Units Firing
    • 2) Fermitian Units Firing
  • L) Close Combat
    • 1) Close Combat Occurrence
    • 2) Opposing Units
    • 3) Close Combat Net Strength Points
    • 4) Close Combat Resolution
    • 5) Close Combat Aftermath
  • M) End Phase
    • 1) Assault Coordination
    • 2) Alien Onslaught
    • 3) Incoming Orders
    • 4) Space/Time Continuum
  • N) Company Commander Abilities
    • 1) Commander Assignment
    • 2) Attached Company Commander Abilities
    • 3) Company Commander HQ Abilities
  • O) Victory Score
    • Victory Point Table
  • P) General Setup
  • Q) Scenarios
    • 1) Martian Mayhem Scenario
    • 2) Lunar Lunacy Scenario
    • 3) Defending Sol Scenario
  • R) Player Modes
    • 1) 2-Player Cooperative Mode
    • 2) 3-Player Cooperative Mode
    • 3) Semi-Cooperative Mode
  • Event Descriptions
    • Fermitian Event Descriptions
    • Volter Event Descriptions

A) Components

1) Maps

Volters Lead the Way! comes with two game maps – one each for Mars and Earth's Moon. These maps represent the areas upon which players fight critical battles. Both are identically laid out with any exceptions noted below. Each map is divided into a series of rows and columns containing spaces, zones, and areas. These regulate unit movement and have other game effects.

a) Regimental Deployment Zone (RDZ): Along the bottom of the map is the Regimental Deployment Zone. Deploy the Volter units in these spaces at the start of the game. Place one Volter unit in each of the nine spaces and it is assigned to the column in which that space is located. Volter units located in the RDZ are in a "safe" area – they cannot be affected by game events, alien fire, etc. By the same token, Volter units can only move out from the RDZ – they may not conduct Fire Combat, Scans, etc.

b) Company Zones: The map is divided into three 3-column Company Zones – one Company Zone for each of the named Companies. The Company names appear on the map below the RDZ in each of the Company HQ Boxes. In these spaces place the Company Commander markers when they are assigned to their HQ. Company Zones are important to gameplay as they indicate where the Company's units can conduct actions, such as Scanning, Fire Combat, etc.

Random Company Selection: Whenever the game calls for you to randomly choose a Company, you will draw an Action Card and get a Random Number (see section 5c below). On a "1-3", the left-side Company is chosen; on a "4-6" the middle Company; and on a "7-9" the right-side Company is chosen.

c) Areas: There are nine Areas on the map. Each Area contains a 9-space square box and is identified with a number from "1" to "9". Use these Areas to resolve events and to identify affected spaces.

d) Approach Zones (AZ): Along the side of the game map are three Approach Zones, each has a distinctive color and contains three numbered rows. The Green AZ is the farthest from the alien positions and contains rows "1" through "3"; the Yellow AZ is the middle-distance zone and has rows "4" through "6"; the Red AZ is closest to the aliens and contains rows "7" through "9". Use the AZ to measure the relative distance and threat level from the alien units.

e) Alien Defense Enclosure Zone (ADEZ): Near the top of the map is a row of spaces with fortification graphics called the Alien Defense Enclosure Zone. These represent the defensive position of the alien forces. Deploy Fermitian units into these spaces at the start of play. They will defend these spaces throughout the game. Only when the Volter forces have defeated the alien units and occupy these spaces can the player attempt to start defusing the Doomsday Device.

f) Doomsday Device Zone (DDZ): Deploy Doomsday Device markers in the row of spaces along the top of the map. Place one of these markers face-down in each of the DDZ spaces at the start of the game. These represent the "counting down" of the Doomsday Device bomb. To defuse the bomb, you advance your units into these spaces, reveal the marker and then hopefully you can control and slow the count. In addition, when a Volter unit resides in a DDZ space, assumed that a strong garrison is left behind in the ADEZ space in the same column. That ADEZ space is now controlled by the Volters. There are also numbers printed in the DDZ spaces that represent each column's number, from "1" through "9".

Technically, the Doomsday Device markers represent the fuses for the world-killing bomb counting down to the destruction of the planet. Your units moving into these spaces and thereby exposing the markers represents the attempted disarming of that portion of the bomb. By the way, the Volter troopers have officially nicknamed the Doomsday Device the "Big Bang Bomb", just for fun.

g) Martian Canals (Mars Map Only): The thick channel that runs across the map represents a deep Martian canal. These canals are not particularly tough to transit but they are populated with alien Early Warning Systems and traps.

h) Lunar Seas (Moon Map Only): These wide swaths of gray dust and steep cliffs make for a logistical nightmare. These spaces have the Lunar Seas graphic (a large crater) and are colored darker than the other spaces.

i) Escarpment Strongpoints (Moon Map Only): These unique spaces represent extra defensive positions put on top of high, jutting moonscape rises. They are treated as normal spaces except that they will contain alien units that must be defeated before the Volter unit can attack the ADEZ space behind them.

j) Game Turn Track: This track is used to keep record of the current Game Turn. You will place the "Game Turn" marker in the "1" space on this track at the start of the game. During the Space/Time Continuum Phase, move the marker one space down the track into the next box. There are 5 Regular Game Turns followed by 5 Countdown Game Turns, for a total of 10 potential turns in a game.

k) Doomsday Track: This track informs the player how close the Doomsday Device Bomb is to actually exploding and destroying the planet. The Doomsday Device Trigger marker is used on this track to measure the threat and begins the game in the "0" space. Each time a Doomsday Device marker is removed during the Doomsday Phase or when a Short Fuse event occurs, the marker is moved the indicated number of spaces down the track. If the marker ever enters or passes the Planet Destroyed space, you lose the game.

2) Volter Unit Counters

There are 28 large Volter unit counters, each representing one squad of Volters.

a) Volter Unit Types: There are three basic types of Volter units: Scouts, Rangers, and Heavy Weapons. In addition, there is the elite Terran Guard squad which can mimic any of the basic unit types at any time. These units function essentially the same way except that each has specific tactical advantages and disadvantages. Every type has a different Strength Point value progression (see "b" below) as they take step losses (see "c" below) and each normally has a unique activation entry on an Action Card.

b) Strength Points (SP): Each Volter unit counter has a large number on it indicating the unit's current Strength Point value. This number is used when conducting both types of combat. This SP value will decrease as the unit loses Steps.

c) Steps: Most Volters units have four Steps (and thus utilize two separate counters) while most aliens have only two Steps (a "Step" is an increment of strength and is represented by each side of a counter). Each Step has a different SP value. With each Hit suffered, the unit will lose a Step. The number of Steps remaining is shown by the number of "dots" along the top of the unit counter. Note that the Terran Guard unit is the only Volter unit that has only two Steps.

  • 1st Hit: Flip the unit counter from its current side (Step 4) over to its reduced-strength side (Step 3). Terran Guard units flip from Step 2 to Step 1.
  • 2nd Hit: Exchange the unit counter with its replacement unit counter (of the same type) showing its Step 2 side. Terran Guard units are eliminated.
  • 3rd Hit: Flip the counter over to its Step 1 side.
  • 4th Hit: Remove the unit counter from the game. This squad is now eliminated from play.
  • Step Recovery: In some cases, a unit can recover one or more Steps. In that case, simply reverse the above procedures.

3) Alien Unit Counters

a) Fermitian Clusters: There are 16 large Fermitian unit counters representing the regular Fermitian Clawed Forces fighting creatures. These aliens are grouped into units called Clusters (roughly equivalent to a Volter squad). Each of these Clusters is represented by an individual counter and contains only two Steps, utilizing the same reduction procedures as the Terran Guard unit.

Note that the terms "Fermitian" and "alien" are interchangeable in this rulebook and both are used throughout the rules to represent the player's enemy.

b) Fermitian Elite Units (Mars Only): There are 4 large counters representing two types of highly-trained Fermitian units, each of which has a unique characteristic. These units are removed from the alien unit mix if playing the Lunar Lunacy scenario (the Fermitian Grand Council refuses to risk these valuable soldiers on just a moon).

  • Pulsar Berserkers: These units are comprised of the most skilled soldiers in the Fermitian Clawed Forces. They have the highest SP value in the regular army but there are fewer soldiers present in each Cluster. As such, this unit has only one Step and is eliminated if it takes 1 Hit (there is no reduced-strength side). However, it also gets an automatic 5+ Save Attempt. After each Hit the unit receives, you must draw a Random Number. With a "1 through 4", the Hit is applied; with a "5 through 9", the Hit is ignored.
  • Venom Fire Teams: The Venom Clan is a race of Fermitians who really enjoy shooting things. This type of unit has a split SP value – it uses the "F" value when issuing Fire Combat and the "C" value when engaging in Close Combat (attacking or defending).

c) Mercenary Alien Formations: There are 6 large mercenary alien counters ("Mercs"). During the Fermitian campaigns of conquest around the universe, some of the subjugated races were deemed worthy enough to be allowed to join the Fermitian Clawed Forces. And yes, they are even somewhat compensated for this service (though not being eradicated is the primary wage). There are two counters for each of the three mercenary alien races:

  • Kaots Mercs: This race specializes in superior fighting skills combined with the ability to "warp" to any location. However, they are also extremely independent and unpredictable.
  • Termite Mercs: The Termite race is composed of relentlessly burrowing creatures that are vicious melee fighters as they pop up from underground and ambush their opponents. This unit has a split SP value – it uses the "F" value when issuing Fire Combat and the "C" value when engaging in Close Combat (attacking or defending).
  • Colossus Mercs: Massive metallic robotic entities make up this contingent of alien mercenaries. There is only one unit of Colossus Mercs in the game, but because they are so strong and tough to damage, this one unit has four Steps and is represented by two unit counters (in the same manner as Volter units).

d) Special Alien Units: There are 6 large Special Alien unit counters that are only introduced by certain Events. These units are the Groundhog, Kondor, and Mushroom Dome units. See the Event Descriptions player aid for a detailed explanation of how and when these units activate.

e) Martian Colonist Settlement Markers (Mars Map Only): Dotted around the Mars map are the destroyed remnants of various human settlements that the Fermitians razed when they invaded. The rubble in these spaces provides cover for an occupying Volter unit. The 5 large Settlement markers are randomly deployed at the start of the Martian Mayhem scenario (see the scenario setup in section Q for details). If a Volters unit in the same space as a Settlement marker takes a Hit from any cause, the player may opt to have the Settlement marker take the Hit instead. Simply flip the marker over to its back side to signify its absorbed one Hit. Each marker can absorb a total of two Hits, so if the marker is used to absorb a second Hit, it is then removed from the game.

f) Moonbase Research Station Markers (Moon Map Only): On the surface of the Moon are located a number of small Research Stations. These buildings provide some cover for Volter units but more importantly, they are very well stocked with survival supplies and equipment. These 5 large Station markers are randomly deployed at the start of the Lunar Lunacy scenario (see the scenario setup in section Q for details). If a Volters unit in the same space as a Station marker takes a Hit from any cause, the player may opt to have the Station marker take the Hit instead. If so, remove the marker from the game (it can only take one Hit). Additionally, a Volter unit may treat a Station marker as an LSP for all purposes (see 4a) providing the marker is with or behind the unit (i.e., units cannot trace supply to a marker in front of them). However, a Station marker is never moved up or down the column – it always remains in its assigned space.

Take note that both the Martian Settlements and the Moonbase Stations can absorb Hits for the Volter units. So carefully selecting the way you move your units can save them from taking damage if they end their move on such markers. Note also that the Hits can come from any cause – so, if your unit needs to take a Hit from a "Oxygen and Supplies are Low!" card, you may take the Hit from the Settlement or Station marker instead (basically ransacking them for the supplies).

4) Miscellaneous Counters

There are 108 small counters representing various game markers. Most will be described in detail in their relevant rule sections, but a few require some additional explanation here.

a) Life Support Pods (LSP): These represent the lifeline of each Volter squad, supplying essential oxygen canisters, laser charges, and kinetic ammunition and are important to their survival. If the Volter unit is eliminated, immediately place the LSP marker in the same column back into that column's RDZ space. LSP markers can become Disabled or Destroyed during the game.

Important Note: A Disabled LSP can still be moved normally during a Consolidation or as called for by an Event. However, being Disabled prevents it from providing any kind of support.

b) Shocked: Units can become Shocked from enemy fire and from Events. Shocked units may only choose to Consolidate during their activation and may not conduct any type of movement (other than Retreat caused by Panic or an Event), may not issue Fire Combat and may not conduct any special activation ability (such as Scan, etc.). They may only defend in Close Combat but with a -2 SP penalty. If a Shocked unit receives another "Shocked" result, it is eliminated from the game. Shocked markers are removed from play as follows:

  • Shocked Volter Units: You may remove the marker when the unit Consolidates, has a Rally On Me! Company Commander Ability applied, attaches a Volters Ho! marker, or when the unit is eliminated.
  • Shocked Aliens: Remove the marker immediately after its penalty effect is completely applied. In other words, either after the alien unit is selected to issue Fire Combat by an Event, but cannot do so due to the Shocked marker, or after a completed Close Combat in which the Shocked marker's "-2 SP" penalty was applied. The marker can also be removed by the Warlord unit entering the unit's space.

c) The Warlord: This unit represents the Fermitian Tactical Sector Leader. The number indicated on the counter is the SP increase the leader provides to the Net SP for the space it occupies. Each side of the counter has an arrow pointing in a different direction indicating in which direction the unit will move during the Warlord Sector Patrol Phase. This unit cannot be targeted in combat unless it is alone in the space. It cannot have a Support Fire marker placed on it. One Hit will eliminate the Warlord.

d) Doomsday Device: These 15 markers are used to determine how quickly the Doomsday Device Bomb will explode. They each have a number that represents the number of spaces that the Doomsday Device Trigger marker moves on its track. If there is a graphic of a Fermitian soldier on the marker, that means that there is a Sentry in that space that must first be defeated in Close Combat before the marker can be controlled.

e) Support Fire: These markers represent heavy fire from the orbiting star-cruiser "Skybreach". When deployed for any reason, the markers are chosen randomly and placed face-down on the map. Each marker is assigned to one alien unit and affects only that unit. The marker may not be placed on the Warlord. If the alien unit moves, the Support Fire marker goes with it.

  • When Support Fire markers are on a unit face-down, reduce the SP of that unit by -1 SP per Support Fire marker. This normally only affects the unit when it issues Fire Combat.

    For example, if a Fermitian unit with 4 SP has two face-down Support Fire markers on it, the unit is treated as having only 2 SP.

  • Support Fire markers are revealed (i.e., flipped over) when the unit is attacked in Close Combat or due to a Scan action. The effect shown on the back of the marker is applied immediately and the marker is removed from the game. A "Shocked" result means the Fermitian unit gets a Shocked marker. A "Hit" result applies one or two Hits on the unit.

  • Support Fire markers may also have the name of one of four Special VP markers – Fermitian Rebel Leader, Advanced Alien Tech, Orion's Belt, or Fermitian Plan of Attack. If so, immediately place that corresponding Special VP marker into that space.

  • No unit may have more than two Support Fire markers on it.

  • If a Mushroom Dome unit is in the space, it must be the first unit to get any Support Fire markers (up to the normal two marker limit).

  • If an alien unit with face-down Support Fire markers is eliminated by Fire Combat or other non-Close Combat means, the markers remain un-revealed and are returned to the unused pool of Support Fire markers.

Essentially the front side of the markers represent the pinning effect of the barrage fire. The aliens are hunkered down, affecting their ability to fight. The player won't know the actual tangible effect on the aliens until the marker is revealed, either by scanning or by engaging in close combat.

f) Volters Ho!: This is a special marker that Volter units can earn and have attached to them. It's essentially their motto and rallying cry and represents the troopers in a frenzied, high morale state. You may use a marker for one of the following benefits on the attached unit (only). The marker is placed back in the marker pool after one use.

  • Take Cover!: You may immediately cancel 1 Hit just inflicted on the attached unit from any source.
  • Charge!: You may ignore the just-drawn Action Card for the attached unit's activation result and draw a new card to replace it. The new card must be used.
  • Steady!: You may remove a "Shocked" marker from the attached unit.
  • No Mercy!: You may add +2 SP to the attached unit's printed SP for Fire or Close Combat.
  • Don't Look! Ignore the Mind Terror Generator Event.

g) Marked: This marker represents the "laser tagging" of an enemy-occupied area. The marker can be placed on an ADEZ space by a Scanning unit and it will add +2 SP to any firing unit's Net SP total when firing on this space. Note that the space itself is marked – not an individual alien unit. The marker remains in the space until its effect is applied and it is then removed.

h) Special VP: There are four markers that are placed into the game when the corresponding Support Fire markers are revealed. Place the appropriate Special VP marker in the same space. You will earn extra Victory Points if you can capture the space containing these markers.

i) Company Commanders: The six Company Commander markers represent a historical Captain in the 324th Volter Regiment. They each have their own unique ratings that reflect their personalities and qualities (these are explained in section N2). These markers can be assigned to stay in the Company HQ or they can be directly attached to units in the field. Their proper use is extremely important to your ability to win (or lose) the game as they provide valuable assets and resources for your troops.

5) Action Cards

There is one deck of 27 Action Cards used in the game. These cards control the action (obviously), being used for resolving a number of different elements in the game. Note that when you draw a card to resolve something, only refer to the appropriate portion of the card – ignore any of the other entries on the drawn card that do not relate to the action you are resolving.

a) Card Number: The number at the top right of each card is its Card Number, used for identification in examples.

b) Volter Unit Activation Entries: In the main body of the card, you will normally find three large sections of text, one for each type of Volter unit (Scout, Ranger, and Heavy Weapons). The appropriate area is referenced when activating that type of unit to determine what the unit's allowed action(s) is. The Terran Guard unit can use any one of the three entries. On some cards, there will only be one entry for all three types of units. In these cases, that one entry applies to any type of unit.

c) Event Entries: At the bottom of each card, there will be an area labeled "Events" and two boxed entries, one above the other. The top (red) entry represents the Volter Event result and the bottom (tan) entry is the Fermitian Event result. Whenever an Action Card or procedure instructs you to "Draw Volter Event!" or "Draw Fermitian Event!", you will draw the next Action Card from the deck and reference only the instructed entry.

Note that most Volter Events can affect any eligible Volter units on the map – not just the currently active unit or Company.

d) Random Number: At the bottom of each card in an orange box is a number from "1" through "9". When you are required to get a Random Number to resolve a situation, you will draw the next Action Card from the deck and reference this number.

Since there are only 27 cards in the deck and they will have to be shuffled a few times during gameplay, we suggest that you place each of the cards in clear plastic sleeving, if possible. It will make the deck easier to shuffle and will protect the cards from wear and tear.

6) Player Aid

One Player Aid card is provided to act as a quick rules reference. After one or two plays, you should be able to play the game using only this card.

7) Opaque Container

You will need to provide an opaque cup, bag, bowl, or whatever works best for you. This is used to randomly draw Fermitian units from during the game.

B) Sequence of Play

You will play a number of Game Turns in Volters Lead the Way!. Each Game Turn is played in a distinct sequence of phases and steps. With the exception of the Doomsday Phase, each phase must be completed in order and to conclusion before proceeding to the next phase. During the three to five Regular Game Turns (depending on the chosen Difficulty Level), the Doomsday Phase is skipped over. Starting with the first Countdown Game Turn, you will conduct a Doomsday Phase as the first phase of the turn for the remainder of the game. Regular and Countdown Game Turns are otherwise identical.

1) Doomsday Phase

Ignore this phase during regular Game Turns. Starting with Countdown Game Turn #5, choose any Doomsday Device marker on the map (face-up or down), remove it and advance the Doomsday Trigger marker accordingly.

2) Fermitian Retaliation Phase

Draw an Action Card and apply the listed Fermitian Event.

3) Warlord/Kaots Patrol Phase

Move the Warlord unit one space in the indicated direction and randomly move any Kaot Mercs unit(s).

4) Commander Assignment Phase

You may attach each Company Commander to a unit. Un-attached Commanders remain in their Company HQ Box.

5) Choose Active Company Phase

Choose one of the Volter Companies whose units have not yet been activated to activate. If all the Volter units in the game are Spent, go to the End Phase.

6) Unit Activation Phase

Draw the top Action Card and choose an un-Spent unit from the activated Company (only) to now activate. When all units of the activated Company are Spent, go back to the Choose Active Company Phase.

7) End Phase

a) Assault Coordination Step: Any un-Used Company Commander may draw a Volter Event.

b) Alien Onslaught Step: Resolve any Special Alien Unit attacks (either the Kondor and/or Habneros Gas).

c) Incoming Orders Step: Reset all Company Commanders. Then remove all Spent, Skybreach Disabled and Cloaking Device markers.

d) Space / Time Continuum Step: Advance the Game Turn marker one space on the Game Turn Track. If the marker was in the Countdown 1 space at the start of this phase, you win the game!

C) Doomsday Phase

During this phase, you will determine the progress of the Doomsday Device Bomb as it counts down to detonation.

1) Doomsday Timing

Ignore this phase during the regular Game Turns. Beginning with Countdown Game Turn #5, you will conduct a Doomsday Phase and choose any Doomsday Device marker on the map – whether it is revealed or not. You then advance the Doomsday Trigger marker the number of spaces on the Doomsday Track equal to the number printed on the chosen marker. You then remove the marker from the game (do not put it back into the pool of available markers).

2) Procedure

The Doomsday Trigger marker begins in the "0" space on the Doomsday Track. It is moved up the track during the game either by the Short Fuse event (moving it one space) or by removing a Doomsday Device marker from the map during the Doomsday Phase (which moves it up by the value of the removed marker). If the Doomsday Trigger marker ever enters or passes the "Planet Destroyed" space on the Doomsday Track, you immediately lose the game.

3) Doomsday Device Marker Status

Doomsday Device markers are normally face-down on the map, so selecting them to remove during this phase is risky. Occupying a DDZ space with one of your Volter units enables you to reveal a face-down Doomsday Device marker located there. In addition, the Alien POWs event also allows you to reveal a marker. This information will help you decide whether to choose a known revealed marker to remove or, if a high value, to leave it on the map and take a chance on an unknown face-down marker.

For example, it's the Doomsday Phase of Countdown Game Turn #3 and Kirk has two face-up Doomsday Device markers on the map – a "4" and a "3". The Doomsday Trigger marker is already in the "6" box of the track so things are not looking good. He can't choose the "4" marker to remove because that will instantly lose the game for him. Choosing the "3" wouldn't lose the game, but it would move the Trigger marker to the "9" space and he would certainly lose at the end of the next turn unless he can remove all the markers by then or uncover the "0" Doomsday Device marker at some point (if it's even in the game!). He chooses instead to reveal one of the face-down markers and take a chance. He flips one of them and it's a "1"! Therefore, the Trigger marker only advances to the "7" box – phew!

D) Fermitian Retaliation Phase

During this phase, you will draw the top Action Card from the deck and reference the Fermitian Event entry (only). Resolve the listed event immediately and to conclusion (see the Events player aid on the back of this rulebook for details). Note that the resolution of this event can occur anywhere on the map and may affect any Volter and/or Fermitian units.

E) Warlord/Kaots Patrol Phase

You will move the Warlord unit and any Kaots Mercs units that are in the game during this phase.

1) Warlord Patrol Movement

The Warlord unit starts the game in a random ADEZ space (as per the scenario's instructions) and with its arrow graphic pointed to the right. During each Warlord Sector Patrol Phase, the Warlord unit will move into the adjacent space in the direction of the arrow on its counter. It will do so each phase unless it is Blocked. The Warlord unit provides its SP bonus to all Fermitian units that share its space. If the Warlord unit enters a space with a Shocked Fermitian unit(s) at any time, remove the Shocked marker(s) immediately.

2) Blocked Warlord Movement

If the Warlord unit is to move into a hex that is Blocked, it will instead flip its counter so its arrow points in the opposite direction and it will immediately move one space in the new direction. The Warlord unit is Blocked in the following circumstances:

a) The Warlord unit has reached the end of the ADEZ (so it is in either column "1" or "9").

b) The adjacent ADEZ space is currently occupied by a Volter unit or there is a Volter unit in the DDZ space of that column.

c) The Warlord will not move into Escarpment Stronghold spaces.

d) If the Warlord unit cannot move left or right due to it being Blocked, it remains in its current space during this phase.

The Fermitian Warlord unit represents the local planetary commander. It is common Fermitian tactics to have the leader patrol along the front, providing its leadership skills to units in a fair manner (rather than directly where it may be needed at the time). Note that rumor has it that the Warlords consider it bad luck to visit positions like the Escarpment Strongholds because of a horrible incident at a similar defensive entrenchment during the battle for the Trano V solar system. Therefore, they will not enter those spaces.

3) Kaot Mercs Warp Move

If any Kaots Mercs alien units are in the game, draw a Random Number for each one and place the Kaots Mercs unit into the ADEZ space in the same-numbered column. If that space is occupied by a Volter unit, conduct an immediate Kaots Warp Assault combat, and increase the alien unit's SP by +3. The unit may not move to an ADEZ space where a Volter unit occupies the DDZ space in the same column. In that case, the Kaots Mercs unit remains in its space. Note that a Kaots Mercs unit will not move this phase if it is Shocked or deployed into an Escarpment Strongpoint space during setup in the Lunar Lunacy scenario.

F) Commander Assignment Phase

During this phase, you will decide how to deploy each Company Commander marker for the upcoming Game Turn.

1) Commander Leads From the Front

You can opt to attach a Company Commander marker directly to any unit in its Company. The marker may not be attached to a unit from another Company nor to an eliminated unit. Simply place the marker on top of the unit to which it is attached. During the upcoming turn, the Company Commander marker will move along with the unit and may also use one Attached Company Commander Ability (see N-2). The Company Commander marker can possibly be eliminated from the game due to alien combat results while it is attached.

2) Commander Stays in Headquarters

If the Company Commander marker is not attached to a particular unit, it remains in its assigned HQ. Place the marker in the HQ Box for its Company. It will remain there for the entire upcoming Game Turn. While there, you may perform one of the allowed Commander HQ Abilities (see N-3). The marker is safe while in this box and cannot be eliminated by alien action.

G) Choose Active Company Phase

You will now choose one of the three Companies to activate, providing that it has not already been activated this Game Turn. If all three Companies have already been chosen and thus all units on the map are Spent, then proceed to the End Phase.

1) Eligible Company

Any Company that has not yet been selected for activation this Game Turn is eligible to be activated this phase. Simply choose one of the named Companies (per the labels in the RDZ) to activate. A Company that has had all its units eliminated cannot be chosen.

2) Activation Procedure

Once selected, you will activate each unit in the chosen Company one by one by completing a Unit Activation Phase for each one (see below). You may not choose to activate units from another Company until all units in the currently active Company are Spent. If all units in the active Company are Spent, you will choose another Company to activate during this phase (if one is eligible).

H) Unit Activation Phase

Once you've decided which Company will be activated, you will choose one unit from that Company to activate and conduct actions until it is Spent, Eliminated or it enters a DDZ space. Conduct the Company's activations by doing the following Steps in order.

1) Activate First Unit

Draw the top Action Card from the Action Deck and then choose any un-Spent unit in the Company to be activated. Do this after you see the Action Card. Once you see the precise instructions on the card, you then choose the unit that will be doing its action.

Once this unit is chosen, it will continue to activate until it is Spent, Eliminated or it enters a DDZ space.

Important Note: Every unit must have at least one Action Card drawn for it during its activation and you choose the specific unit to activate after seeing the card – even if the card has only one instruction (which would apply to all three types of units). For example, if you draw a card and the entry is "We Need More Ammo!", you must still select one of your un-Spent units to activate. That unit must then apply the effects of the "We Need More Ammo!" instruction. You are then committed to that unit (and its type) for the remainder of this activation.

You cross reference the type of unit you are activating (Scout, Ranger or Heavy Weapons) with the instructions on the drawn card for the same type of unit. In the case of a Terran Guard unit (only), any instruction can be chosen with each card – you don't have to stay with the same type from card to card. Conduct the action as prescribed by the card to its conclusion. After the action is completed, you must proceed as follows:

a) If the unit is HALTED by the action (see section I), mark it as being Spent by giving it a "Spent" marker. The unit is immediately finished with its activation for this turn in its current position and condition. Proceed to the Activate Next Unit step.

b) If the unit is not HALTED by the Action Card result, you make one of two possible decisions – Continue or Consolidate. However, if the unit is Shocked, then you must choose Consolidate. If the unit is in a Lunar Seas space, you may not choose Consolidate.

  • Continue: You opt to keep going with this same unit and continue its activation. By making this choice, you must then draw another Action Card and perform an activation, as above. This time you have no choice – you must continue activating the same unit and must use the indicated entry on the card for its unit type.
  • Consolidate: You opt to stop the unit's activation voluntarily. By doing so, first mark the unit as being Spent. Then immediately move the LSP marker in the same column up into the Consolidating unit's space (regardless of distance and even if it is Disabled). If that LSP marker is already in the same space with the Consolidating unit and the LSP is not Disabled, then the unit gets a bonus from the LSP and may either:
    • Recover 1 Hit. The unit gains back one Step – change the unit counter accordingly.
    • Reload Ammo. The unit may remove any and all Low Ammo markers it may have.

This is a very important aspect to Consolidate! If you've managed to have your unit stacked with its LSP when it Consolidates, you don't have to advance the LSP and you get the added bonus of the pod recouping the unit's strength or resupplying it with ammo. Also note that this bonus does not apply if the unit is forced to HALT on its LSP marker – it is only applied with a voluntary Consolidate.

Consolidation must be chosen if the active unit has a "Shocked" marker (unless in a Lunar Sea space). After Consolidating, only remove the Shocked marker – do not move the LSP marker at all and the unit does not get to Recover 1 Hit nor Reload Ammo.

A unit that is Shocked when it starts a new activation must still draw a card! Though it can't move, conduct combat or other action, the card may still dictate a Hit on the unit or produce an Event. After the card is resolved, then the Shocked unit must choose to Consolidate. Also note that if a Shocked unit ends up in a Lunar Sea space, it cannot choose to Consolidate! Then you'll need to find another way to remove that Shocked marker – either with a Company Commander or by drawing a helpful Event.

c) Units in DDZ Spaces: Units that have reached a DDZ space may not activate at all for the remainder of the game. When you active a Company with such units, first mark them with "Spent" markers to remind you that they cannot activate.

d) Terran Guard Units: A Terran Guard unit can be any type of unit you wish it to be for the current Action Card. After seeing the card, choose any instruction and the unit then functions as that type of unit for the duration of this Action Card (only), including being able to use any Scan and Sustained Fire abilities. If the activation continues, you may change the type of unit the Terran Guard is mimicking for the next Action Card.

2) Activate Next Unit

After the first unit is done with its activation, draw the top Action Card from the Action Deck. Again, you choose the unit to be activated after you see the Action Card but it cannot be the unit that just completed its activation (as it is now marked Spent). If a unit has been eliminated, then its column cannot be activated. Once you see the precise instructions on the card, you then choose one of the remaining units to do its action. Follow the exact same procedure as with Activate First Unit.

3) Activate Last Unit

After the previous unit is done with its activation, draw the top Action Card from the Action Deck. This time, you must use this card for the remaining unit. If a unit has been eliminated, then its column cannot be activated. Once you see the precise instructions on the card, you apply the action to the remaining unit depending on its type. Follow the exact same procedure as with Activate First Unit.

Note that if the Company has had units eliminated during play, there will be fewer than three units available to activate. In fact, a Company is skipped entirely from this process if it has no units remaining.

4) Activate Next Company

When all units of the currently activated Company are Spent, go back to the Choose Active Company Phase.

Example: Paulette elects to activate the Black Hole Company and she draws the top Action Card. The best entry on that card is for a Scout unit and she has one in her Company. She activates the Scout unit and performs the listed action. Since it does not result in a "HALT" she may now opt to either Consolidate the Scouts or Continue their activation. She decides to Continue and draws the next Action Card, referencing the "Scout" entry only (since she is committed to activating her Scout squad). Again, it does not cause a "HALT". But this time, she opts to Consolidate the unit. She stops the activation, moves up the LSP marker in the unit's column and then gives the unit a "Spent" marker. She now has two units remaining to activate and draws the next Action Card. This time it has only one entry on the card that will affect any type of unit. She chooses to activate the Heavy Weapons unit with this card as it is in the best position to handle the instruction. That result yields a "HALT" and the Heavy Weapons is marked "Spent". The LSP marker in that column is not moved. She then has one unit left in the Company – the Ranger squad – and the next drawn card must be applied to that unit.

I) Activation Descriptions

Each Action Card provides instructions as to how to activate each of the three types of units. However, in some cases, there is only one instruction listed which applies to all types of units. These instructions are specifically explained as follows:

a) MOVE 1: Move the active unit up to one space forward (i.e., to the next higher Row number). If moving into a space with an alien unit a Close Combat must be fought. Shocked units may not Move (even during an Event). A unit may Swap columns with an adjacent-column unit. This counts as one space of movement (see J-2).

b) MOVE 2: Move the active unit up to two spaces forward, using the same procedures as the "MOVE 1" entry above. You may opt to move the unit a portion of its move or not at all. The unit must stop moving upon entering a space with an alien unit, DDZ space or Chasm marker.

c) HIT: The unit must be reduced by one Step or a Martian Settlement/Research Station marker in the same space may absorb the Hit. Immediately flip or replace the unit's counter to reflect one less Step. If replacing, may sure [sic] you use the same type of counter. If the unit is Eliminated, then its activation automatically ends and its counter is removed.

For example, if a Ranger unit is on its Step 3 side (. . .) and it takes a HIT result, you will replace the Step 3 counter with any Step 2 (. .) Ranger counter. All the counters for a given type of unit are identical.

d) SCAN: This result is only available to Scout units that are not located in the RDZ. If in the RDZ, treat this result as "no effect" and continue with the activation. If eligible, you may choose one of three special actions with this entry, depending on the Area in which the Scout unit is located.

  • Recon (reveal Support Fire effects): If the active unit is in the Green, Yellow or Red AZ, you may flip over and apply one Support Fire marker located on an alien unit within the Scout's Company Zone (only). That Support Fire marker's effect is immediately applied to the associated alien unit and the marker is removed from the game.
  • Laser Tag (place a "Marked" marker): If the active unit is in the Yellow or Red AZ (only), you may place a "Marked" marker into any ADEZ or Escarpment Strongpoint space in the Scout's Company Zone (only). This will give a benefit to Volter Fire Combat against all alien units in this space.
  • Hack Defense System (place a "Shocked" marker): If the active unit is in the Red AZ (only), select any alien unit in an ADEZ or Escarpment Strongpoint space in the Scout's Company Zone. Place a "Shocked" marker on the selected alien unit. An alien unit that is already Shocked will be eliminated. Note that this action allows you to bypass a Mushroom Dome unit in the space – you may select any alien unit in the space on which to place the marker.

e) CAUTIOUS ADVANCE: The unit treats this result as a "MOVE 1" but only if the unit is not advancing to a different Zone (i.e., from RDZ to Green AZ, Green to Yellow AZ; Yellow to Red AZ; Red AZ to ADEZ; ADEZ to DDZ). If moving would advance the unit into another Zone, then the unit cannot move and it must then treat this as a "HALT" result instead (see below).

For example, if a unit is in Row 6 of the Yellow AZ and draws a "CAUTIOUS ADVANCE", it cannot move as doing so would bring it into the Red AZ. The same would apply if the unit is just starting the game and is in the RDZ – it could not move into the Green AZ. The unit then can only apply the "HALT" result.

f) PANIC!: The unit is terrorized! Check if the result applies or not depending on where the unit is located:

  • The result does not apply if the unit is in the RDZ or in a Deep Crater space. Ignore the result and the unit's activation continues normally.
  • Unit is in the Green AZ: Apply as if a normal "HALT" result.
  • Unit is in the Yellow AZ: The unit must move back to its LSP marker. It remains in its space if stacked with the marker and if the LSP marker is destroyed, it must move back to its RDZ space. Then apply a normal "HALT" result there.
  • Unit is in the Red AZ or ADEZ: The unit must move back to its LSP marker. It remains in its space if stacked with the marker and if the LSP marker is destroyed, it must move back to its RDZ space. Then the unit is given a "Shocked" marker and applies a normal "HALT" result there.

g) FIRE: The unit may immediately issue Fire Combat (see section K). Apply any results immediately.

h) RECKLESS CHARGE: If this option is chosen, you draw a Random Number and cross reference the number with the listed Reckless Charge results on the card. Then apply the indicated result using normal procedures.

i) SUSTAINED FIRE: The active Heavy Weapons unit issues Fire Combat and increases its normal SP total by +2 SP. However, the unit must automatically apply a "HALT" result after resolving the Fire Combat.

j) OXYGEN & SUPPLIES ARE LOW!: Check the current distance between the active unit and its LSP marker.

  • Scout and Terran Guard units must be within 3 spaces of the marker;
  • Ranger units must be within 2 spaces;
  • Heavy Weapons units must be within 1 space;
  • Any unit in a Lunar Sea space is always considered to be outside the required range, regardless of type.

If the unit is not within the required distance of its LSP marker or if the LSP marker is Disabled, treat this as a "HIT" result. If the unit is within the required distance, there is no effect. A Research Station marker space can be considered an LSP marker for this purpose. A Martian Settlement marker in the unit's space can be used to absorb this Hit result.

For example, a Ranger unit is in Row 4 and draws an "OXYGEN & SUPPLIES ARE LOW!" result. If its LSP marker is in Rows 4, 3 or 2, the unit gets its supplies and this result has no effect. The unit may then Continue or Consolidate. If, however, the LSP is in Row 1 or the RDZ or if the marker is Disabled or eliminated, you must apply 1 Hit on the unit. It can then Continue or Consolidate.

k) WE NEED MORE AMMO!: Check the current distance between the active unit and its LSP marker and apply as with "OXYGEN & SUPPLIES ARE LOW!" above. If the unit is not within the required distance of its LSP marker or if the LSP marker is Disabled, give the unit a Low Ammo marker. There is no limit to the number of Low Ammo markers a unit may have. If the unit is within the required distance, there is no effect. A Research Station space can be considered an LSP marker for this purpose.

l) DRAW VOLTER EVENT!: Draw the top Action Card and reference the Volter Event entry. Apply the listed event immediately.

Example: Tony is activating a Heavy Weapons unit and draws the "DRAW VOLTER EVENT!" card. He immediately draws the next Action Card and looks at the "Volter" entry under the "Events" section at the bottom of the card. It's card #18, so the entry is "Saturation Fire". Checking the Event Player Aid on the back of the rulebook, he sees that he can select any Company (even one of the two that are not currently activated and even if they have already been activated). Tony chooses the Comet Company and conducts Fire Combat with all its units that are eligible to do so.

m) DRAW FERMITIAN EVENT!: Draw the top Action Card and reference the Fermitian Event entry. Apply the listed event immediately.

Note that both types of Events do not necessarily affect just the active unit – their effects can be applied anywhere and on any type of unit on the map, as described by the Event itself. This why the "Active Unit" marker is included in the game – it helps you remember which unit is active in case the Event causes a lot of activity to occur elsewhere on the map. Also note that Spent Volter units can participate in an Event if otherwise eligible to do so.

n) HALT: The unit remains in its current space and its activation is finished. Mark the unit Spent by giving it a "Spent" marker. Advance to the next Step.

Important Note: Do not move the unit or the unit's LSP marker with a "HALT" result. The unit remains in its current position and condition, as does its LSP marker. Also note the important difference between HALT and Consolidation. A HALT is mandated and immediately ends the unit's activation; a Consolidation is a voluntary ending of the activation and allows the LSP to move forward or

provide a bonus (if the LSP is already with the unit).

o) / : If two results are separated by a slash, you can do either the action to the left of the slash or the action to the right of the slash. You may not do both.

For example, if the result is "SCAN / MOVE 2 + HIT", you must decide to either have the unit Scan or have the unit Move up to 2 spaces and take 1 Hit. You could not both Scan and Move.

p) + : You must do both listed actions in the order listed.

For example, if the result is "MOVE 1 + HIT", you must first move the unit up to 1 space. Then you must apply 1 Hit on the unit (even if you decide not to move it at all). If the unit is entering Close Combat, the Hit is applied before the combat.

J) Unit Movement

Volter units must be moved up the map board towards the alien defensive position in order for you to have any chance to win. Units will have the opportunity to move not only during their own activation, but possibly as a result of Events as well.

1) Normal Movement

Normal movement results from "MOVE 1", "MOVE 2", "CAUTIOUS ADVANCE" and "RECKLESS CHARGE" activation entries. Usually, units that move one or two spaces do so simply by advancing from the unit's space to the adjacent space (i.e., moving from their numbered row to the next-higher numbered row). Units must remain in their assigned column when moving forward (however, see Swapping Columns below). You may opt not to move a unit even if you select an action that allows movement.

2) Swapping Columns

You may have two units from the same Company in columns adjacent to one another switch their columns as part of the active unit's movement. The unit moves directly sideways (keeping its current row number) into an empty space in the adjacent column. The Volter unit currently occupying that column also moves horizontally, but in the opposite direction and occupies the active unit's previous column (but maintains the same row number). This swap costs the moving unit 1 space of movement. Neither unit may currently be in a DDZ space nor swap into a space that is occupied by an alien unit, has a Chasm marker, is a Lunar Sea space, or would cross a space's side that has any portion of a Martian Canal graphic. Also, a Shocked unit cannot swap columns.

For example, if the unit is using a "MOVE 2" action it could make the swap and still move one more space up its new column, as if it is using a "MOVE 1" action.

The inactive unit that swapped columns does nothing but switch columns and its condition and/or status is normally irrelevant (for example, it could be Spent and still swap). Each unit's LSP markers also swap columns. A unit may swap into an empty column. Only one swap move can be conducted each activation.

3) Alien-Occupied Space

A Volter unit may enter an alien-occupied space normally – there is no penalty or additional cost for doing so. However, if it does so it must stop its move and immediately resolve a Close Combat as the attacker (see section L). In addition, as soon as a unit moves into this space, reveal any Support Fire marker in the space immediately revealed and apply its effect to the attached alien unit.

For example, a Volter unit draws a "MOVE 2 + HIT" but the first space it enters is an ADEZ space with a Fermitian unit. It loses its second space of movement, is reduced by one Step due to the Hit and then engages the alien unit in Close Combat. However, the alien has two Support Fire markers on it. These must be revealed and applied immediately. The top marker says "Miss" and therefore has no effect. The second marker says "Shocked + Orion's Belt". The alien unit gets a "Shocked" marker and you place the "Orion's Belt" marker in the space. This is great! The Fermitian unit will lose 2 SP for being Shocked and you will get bonus Victory Points for capturing the Special VP marker if you win the combat.

4) Chasm Space

If a unit has a Chasm marker in the space immediately to its front, it may only enter or pass through that space under certain circumstances. A unit needs a "MOVE 2", "MOVE 2 + HIT" or a "MOVE 1 + HIT" result to enter or pass through the space (note that a "MOVE 1" result is not enough to allow the unit to enter). The unit may also "jump over" the space if it is able to utilize a Jet Packs event or it may enter it normally with a Company Surge event. If the unit successfully enters the space or "jumps over" it, remove the Chasm marker. If the unit does not achieve the appropriate movement result on the Action Card activation, apply any other result normally and then proceed with the unit's activation.

5) Martian Canals

Units that end their activation in a Martian Canal space (whether by a HALT or Consolidate) draws an Action Card after the activation is complete and references the Fermitian Event entry. Resolve it immediately. Note that units that end a move in or pass through a Martian Canal space due to an Event do not draw a Fermitian Event.

6) Lunar Seas

Units may enter, pass through and leave these spaces with no penalty. However, units may not choose to Consolidate in a Lunar Sea space. The unit may only end its move in such a space due to a HALT or at the end of movement due to an Event.

7) Doomsday Device Zone Space

Doomsday Device Zone (DDZ) spaces are the ultimate goal for Volter units. Their capture can lead to huge benefits and clues to winning the game.

a) When a Volter unit moves into the DDZ space in its column, you must first apply all the effects of the Action Card. If the unit is not eliminated, immediately reveal the Doomsday Device marker in that space (if there is one).

b) If that marker has a Sentry icon (an alien figure graphic), the units must first fight a Close Combat using normal procedures. The marker is treated as a Fermitian Cluster unit for all purposes, with an SP equal to the number on the counter. Sentry markers are eliminated with one Hit.

c) If the Volter unit wins the combat or if there is no Sentry icon on the marker, then the Doomsday Device marker is left in the space face-up, revealing its value.

d) If the Volter unit loses the combat (by retreating or being eliminated), remove the Doomsday Device marker from the game permanently and then replace it with a new randomly drawn, face-down Doomsday Device marker (from the pool of unused markers).

e) Automatically move the unit's LSP marker into the DDZ space after its capture.

f) Once a Volter unit has successfully occupied a DDZ space, it remains there for the rest of the game. It can provide the Flank Support benefit to a Close Combat that occurs in either adjacent column's ADEZ spaces but otherwise it is Spent for the balance of the game.

Example: Fred draws a "MOVE 1" entry and moves his Terran Guard unit into the DDZ space in its column, which also has a face-down Doomsday Device marker in it. He immediately flips the marker over and sees that it has a "3" on it, along with the face of a really ugly alien. His unit must now fight a Close Combat against that disgusting sentry. Fred's unit wins the combat and by doing so, he leaves the Doomsday Device marker face-up in the space. If the unit had lost the combat, the "3" marker would be removed from the game and replaced by a new, unknown Doomsday Device marker.

K) Fire Combat

Fire Combat is issued by units from both sides using laser rifles, quantum grenade launchers, proton blasters, etc. This mechanic represents a more determined and directed fire against the enemy.

1) Volter Units Firing

a) Fire Combat Occurrence: Volter units use this Fire Combat method with a "Fire" or "Sustained Fire" Action Card activation instruction and with an "Open Fire!" Company Commander Ability.

  • Shocked Volter units may not issue Fire Combat.
  • Units in a Martian Canal space or in the RDZ may not issue Fire Combat.

b) Targeting: Fire Combat can only be directed against one alien unit located in the same column as the firing Volter unit (exception: Heavy Weapon units). If there is more than one Fermitian unit in the targeted space, you may choose which unit to affect (exception: the Warlord).

  • Heavy Weapon units may fire at any alien unit located in an ADEZ or Escarpment Strongpoint space in their Company Zone (however, see below).
  • The Warlord unit can only be specifically targeted if it is alone in the space.
  • If a Mushroom Dome unit is in, or adjacent to, the targeted space, the target is automatically the Mushroom Dome unit itself (it shields alien units in the same space or adjacent to it from enemy fire). "Adjacent" includes any unit in an Escarpment Strongpoint space in front of the Mushroom Dome, as well as the ADEZ spaces to the left and right.
  • If there is an alien unit in an Escarpment Strongpoint space, it must be targeted first as it blocks Volter Fire Combat to the ADEZ space behind it.
  • Groundhog units may not be targeted by Fire Combat.

c) Fire Combat Strength: The effectiveness of Fire Combat is based on the Net Strength Points (SP) of the firing unit. This is calculated as follows:

  • Initial Fire Combat Strength: Printed SP of firing unit counter.
  • Long Range: -1 SP if firing from the Yellow AZ; -2 SP if firing from the Green AZ.
  • Low Ammo: -3 SP for each "Low Ammo" marker with the firing unit.
  • Marked Target: +2 SP if the target space has a "Marked" marker. Remove the marker after applying this modifier.
  • Sustained Fire: +2 SP if using a Sustained Fire action.
  • Fire Control: If you decide to use an attached Company Commander marker, add SP equal to the "F" value of the attached Commander.
  • Regardless of the accumulated adjustments from above, the Net SP cannot be lower than "0 SP" nor greater than "8 SP". If the modified SP is "0", there is no Fire Combat resolved.

d) Fire Combat Resolution: Once the Net SP of the firing unit is determined, draw a card and compare the Random Number to the Net SP. Then apply as follows:

  • Random Number greater than Net SP = no effect
  • Random Number equal to or less than Net SP = apply 1 Hit against the targeted alien unit

e) Mushroom Dome Units: If the targeted unit is a Mushroom Dome unit and it receives a Hit, it is entitled to a Save Attempt as indicated on its counter. This means that for each Hit suffered by the unit, you draw a separate Random Number. If the number is less than the indicated Save Attempt number on the counter, the Hit is applied normally; if equal to or greater than the number, the Hit is cancelled and does not apply to the unit.

Remember that Mushroom Domes become the targeted unit for each of the adjacent spaces as well (the dome is sheltering them).

Example: Dean is activating his Heavy Weapons unit and draws Action Card #6, which is a "FIRE / MOVE 1" entry. He can do either action with his unit (not both) and he chooses to issue Fire Combat. The Heavy Weapons unit is on Step 3, which is an SP of "6". It is located in the Green AZ, which is a -2 SP reduction, but the alien unit in its column is in a space with a "Marked" marker. So that's +2 SP and the unit therefore remains at 6 SP. He draws the next card, and the Random Number is "5", which is a Hit on the alien unit. Because the Fermitian was already on its Step 1 side, the alien [is] eliminated.

2) Fermitian Units Firing

a) Fire Combat Occurrence: Alien units use this Fire Combat method with "Laser Volley", "Minefield", "Habneros Gas", and "Venom Drone Strike" Fermitian Events.

  • Shocked alien units may not issue Fire Combat. Remove the "Shocked" marker after this opportunity is denied to the unit.
  • If there is an alien unit in an Escarpment Stronghold space, the Fermitians use only that unit for the Fire Combat (and not those in the ADEZ space behind it).

b) Targeting: "Laser Volley" can only be directed against one Volter unit located in the same column as the firing alien unit(s). The "Minefield" marker attacks each Volter unit that tries to enter a space in or adjacent to the marker. "Habneros Gas" attacks each Volter unit in its Area. "Venom Drone Strike" is directed against each Volter and LSP marker in the Area under attack.

  • Volter units in an RDZ space may not be targeted.
  • Volter units in a Martian Canal space may not be targeted by a "Laser Volley".

c) Fire Combat Strength: The effectiveness of Fire Combat is based on the Net Strength Points (SP) of the firing unit. This is calculated as follows:

  • Initial Fire Combat Strength: Printed SP of all alien units in firing space added together.
  • Short Range: +2 SP if firing at Volter unit in Red AZ; +1 SP if firing at Volter unit in Yellow AZ.
  • Warlord in firing space: +2 SP.
  • Regardless of the accumulated adjustments from above, the Net SP cannot be greater than "8".

f) Fire Combat Resolution: Once determining the Net SP of the firing unit, draw a card and compare the Random Number to the Net SP. Apply the result as follows:

  • Random Number greater than Net SP = no effect
  • Random Number equal to or less than Net SP = apply 1 Hit against the targeted Volter unit

d) Commander Casualties: If a Company Commander marker is attached to the targeted Volter unit, the marker is eliminated from the game if the printed Random Number drawn by the alien unit is a "1" (i.e., a natural "1" without any modifiers applied).

e) Martian Colonist Settlements and Research Stations: If the targeted Volter unit is stacked with a Martian Colonist Settlement or Research Station marker and receives a Hit (from any source), you may apply the Hit to the marker instead of the Volter unit. A Martian Colonist Settlement marker can have a total of two Hits applied to it – flip the marker over after the first Hit and remove it from the game after the second Hit. The Research Station marker only absorbs one Hit, it is eliminated after applying a Hit.

Example: Nancy is activating a unit and draws a Fermitian Event. She draws another card and gets "Laser Volley". That means that each alien unit in the active unit's Company Zone will issue Fire Combat. Luckily, one of the ADEZ spaces in the zone is empty. One ADEZ space has a "3 SP" Fermitian Cluster unit and Nancy has a Scout unit in the Yellow AZ of the same column. She draws a Random Number and it's a "5", which is a miss as it is greater than the alien's modified SP of "4" (it has 3 SP but that is increased by 1 because the target is in the Yellow AZ). The other column in the Company Zone has a Venom Fire Team, which has an SP for Fire Combat of "7". Its target is a Ranger unit with the Company Commander "Allen" attached. It's in the Red AZ so the alien unit will have an adjusted SP of "9", which is modified down to an "8" as that is the max. Nancy draws a "1" which is not only a Hit on the Ranger unit (removing a step), but "Allen" is eliminated from the game as well!

L) Close Combat

Close Combat is when the fighting gets up close and personal! The Volters and aliens go toe-to-claw and grapple with one another or engage in a very close-range exchange of fire. In any case, this method of combat is decisive and deadly.

1) Close Combat Occurrence

Volter units use Close Combat whenever they move into the same space with an alien unit. This can occur due to movement or by Event, in which case the Volters are the attackers. If attacked by an alien unit, Volter units defend normally. Regular Fermitian units will normally only defend in Close Combat – they rarely attack. Two Special Alien Units - the Groundhog and Kondor units - will attack in Close Combat if they are in the game. In any case, both units involved in a Close Combat will figure their Net Strength Points separately and then draw a Random Number to get their respective Total Close Combat Score.

a) If there are any Support Fire markers on an attacked alien unit, they are revealed and applied against the Fermitian unit upon the Volter unit moving into the space. The Support Fire markers are then removed from the game.

b) Shocked units may not attack in Close Combat but they may defend with a -2 SP penalty.

2) Opposing Units

Close Combat is fought between an attacking unit (which is the unit moving or activated by an Event) and a defending unit. If there is more than one Fermitian unit defending, they are all attacked as a group (except as noted below).

a) The Warlord unit can only be targeted if it is alone. If with other units, they must be eliminated first, and a separate Close Combat is fought against the Warlord (but this is still part of the same activation by the Volter unit).

b) The Mushroom Dome unit must be attacked first if it is in or adjacent to the Close Combat space. Once it is eliminated, then a separate Close Combat is fought against the remaining alien units in the attacked space (if any).

3) Close Combat Net Strength Points

a) Alien Close Combat Net SP: The alien unit in the combat (attacking or defending) calculates its Net SP first. All modifiers listed below are in effect for the entire duration of the Close Combat being resolved.

  • Alien Initial Close Combat Strength: Add the printed SP of all involved units. "Sentry" Doomsday Device markers use the printed value of the marker as the SP of the Sentry unit.
  • Warlord in attacked space: Increase Net SP by +2 SP. A lone Warlord unit has 2 SP.
  • Mushroom Dome is defending: the unit has "0" SP. Note that a Mushroom Dome shields adjacent spaces as well as its own in Close Combat, like it does in Fire Combat. Though it has "0" SP, it must still be attacked first and eliminated before any other alien units may be attacked.
  • Shocked: If the unit has a "Shocked" marker and is defending, decrease its Net SP by -2 SP for the whole combat. Remove the marker after the entire Close Combat is fully resolved.
  • Alien Drop Ship Attack or Kaots Warp Assault: If the alien unit is attacking due to an Alien Drop Ship Event or if a Kaots Mercs type unit just moved into this space, increase its Net SP by +3 SP.

Regardless of the accumulated adjustments from above, the Net SP value cannot be lower than "0 SP".

b) Volter Close Combat Net SP: The Volter unit involved in the combat (attacking or defending) calculates its Net SP second. All of the modifiers listed below are in effect for the entire duration of the Close Combat being resolved.

  • Volter Initial Close Combat Strength: The printed SP of the unit involved.
  • Flank Support: If the combat is occurring in an ADEZ space (attacking or defending) and there is a Volter unit in an adjacent DDZ space, you may add half of the adjacent unit's SP (rounded down) to the attacking unit's Net SP. If there are two supporting units available, add both of their SP together and then halve that total (rounded down) to get the supporting SP amount.
  • Volters Lead The Way!: If you decide to use an attached Company Commander marker, add SP equal to the "C" value of the attached Commander.
  • Volter's Ho!: If a "Volters Ho!" marker is with the unit, increase its Net SP by +2 SP. Remove the marker after the entire Close Combat is fully resolved.
  • Jet Pack Attack: If the unit used a Jet Packs Event to enter Close Combat, increase its Net SP by +3 SP.
  • Shocked: If the unit has a "Shocked" marker and is defending, decrease its Net SP by -2 SP for the entire combat.

Regardless of the accumulated adjustments from above, the Net SP value cannot be lower than "0 SP". Note that unlike Fire Combat, there is no maximum Net SP total.

4) Close Combat Resolution

Close Combat is fought differently than Fire Combat. Both units each separately calculate their Net SP (per above) and then each adds the value of a Random Number. Draw the alien Random Number first and add it to the Net SP to get the Alien Close Combat Score. Then do the same for the Volter unit to get the Volter Close Combat Score. Compare the two Close Combat Scores and apply as follows:

  • The unit(s) with the lesser Close Combat Score takes 1 Hit. In the case of multiple alien units, you may decide which unit takes the Hit except in the case of Warlords and Mushroom Domes. A Warlord unit cannot be given a Hit unless it is alone in the space. A Mushroom Dome unit always take the Hits before any other alien units.
  • If the unit with the higher Close Combat Score gets a total that is at least double the lesser unit's score, then the lesser unit takes an additional Hit (for a total of 2 Hits).
  • If both units score the same Close Combat Score, then both units each take 1 Hit.

a) Commander Casualties: If a Company Commander marker is attached to the Volter unit involved in the combat, the marker is eliminated from the game if the printed Random Number drawn for the alien unit is a "9" (i.e., a natural "9" without any modifiers applied).

b) Martian Colonist Settlements and Research Stations: If the defending Volter is in a Martian Colonist Settlement or Research Station space and it receives a Hit, you may apply the Hit to the marker instead of the Volter unit. A Martian Colonist Settlement marker can have a total of two Hits applied to it – flip the marker over after the first Hit and remove it from the game after the second Hit. The Research Station marker can only absorb one Hit, so it is eliminated after a Hit is applied against it.

c) Mushroom Dome Units: If the defending unit is a Mushroom Dome unit and it receives a Hit, it is entitled to a Save Attempt as indicated on its counter. This means that for each Hit suffered by the unit, you draw a Random Number. If the number is less than the indicated Save Attempt number on the counter, the Hit is applied normally; if equal to or greater than the number, the Hit is cancelled and does not apply to the unit. The Volter unit must first defeat a Mushroom Dome unit before it may freely continue its attack against any eligible alien units that are protected by the Mushroom Dome (whether adjacent or in the attacked space).

5) Close Combat Aftermath

Apply the resulting Hits to either or both units as dictated by the Close Combat Resolution. Then proceed as follows:

a) If the Alien unit is Eliminated: The Volter unit remains in the current space. If it was the attacker during its own activation, you continue with its activation normally. If the unit was attacking as part of an Event, it simply remains in the current space. Note that this applies only if all alien units in the space are eliminated – if any survived the combat, then see "c" below. If a Mushroom Dome was eliminated, the Volter may continue to attack any eligible alien units that were protected by it (and the Warlord, if present, would be the last attacked).

b) If the Volter unit is Eliminated: The alien unit(s) simply remain in the space. The Volter unit's LSP marker is moved back to the column's RDZ space. A surviving attached Company Commander marker is placed back in its HQ Box.

c) If neither unit is Eliminated: You may Retreat the Volter unit one space back and then it must HALT (if this is its activation) and the unit is also given a "Shocked" marker. Any LSP marker in the unit's space also retreats. The alien unit remains in its space. If you do not choose to Retreat, another Close Combat is immediately fought. All of the original applicable Net SP adjustments are kept and the combat is resolved normally.

Note that alien units never opt to Retreat – they will always continue the combat if they survive.

Example: Roger is in the process of conducting a Scout unit's activation from Earthling Company when he draws the "Company Surge" Volter event. He chooses his Deimos Company to take the action. He moves his three units up one space each but his last Ranger unit of "4 SP" (and its attached "Volter's Ho!" marker) enters an ADEZ space with a "4 SP" Colossus Mercs unit (so it's on its Step 2 side). That forces an immediate Close Combat. Note that this is resolved immediately, even though the unit that triggered the event is in an entirely different Company. There are no other modifiers to the alien unit's SP, so Roger draws the next card to a get a Random Number. He draws a "5" and adds it to the alien SP of "4" to get an Alien Close Combat Score of "9". He decides that he will use the "Volter's Ho!" marker for its "No Mercy!" ability and increase the Ranger unit's SP to "6". He draws a Random Number and gets a "4", which is a Volter Close Combat Score of "10". That beats the alien's score (but not by double) so 1 Hit is scored on the Mercs. Roger flips the alien unit to its Step 1 side and it is now only 2 SP strong. He decides to keep going for the kill and continues the Close Combat. The same procedure is used and the "No Mercy!" modifier is still in effect. Roger draws a "2" for the Colossus Mercs, so their Close Combat Score is only "4" and he draws an "8" for the Rangers, achieving a Close Combat Score of "14". That would normally inflict 2 Hits but the aliens only have one Step left. They are eliminated and removed from the game. The Rangers remain in the space – victorious! Now Roger will go back to the Volter unit whose activation was in progress when this Event occurred. And he'll know exactly where that was because he used the "Active Unit" marker to point at the Scout unit in Earthling Company.

M) End Phase

After all the Volter units have been Spent, no further units can be activated. You then perform the last few steps of the Game Turn.

1) Assault Coordination

If at this point any un-Used Company Commander markers remain (either in the HQ Box or attached to a unit), you may "use" the marker to draw an Action Card and apply its Volter Event. Resolve the Event's effects immediately and normally.

2) Alien Onslaught

Resolve any Special Alien Unit attacks. The Kondor unit and Habneros Gas marker will conduct their attacks during this phase (in that order) and only if they are currently in the game. Note that the Kondor will only conduct one round of Close Combat (regardless of result) and will keep returning and attacking a unit in a random Area until it is eliminated. The Habneros Gas does its attack and is removed from the game.

3) Incoming Orders

Reset all Company Commander markers by flipping them back to their "ready" sides and placing them into their respective HQ Boxes (if not already there). Then remove all Spent markers. Finally, remove any Skybreach Disabled marker and reclaim the Active Unit marker.

4) Space/Time Continuum

Advance the Game Turn marker one space on the Game Turn Track.

If the marker was in the Countdown 1 space at the start of this phase and the planet was not destroyed, you win the game!

N) Company Commander Abilities

The six Company Commanders of the 324th Volter Regiment who are deployed for this assignment – Captains Allen, Barber, Horst, Mossman, Kennedy and Manzo – are themselves hardcore veterans of numerous interstellar campaigns. They are highly respected leaders who command much authority amongst the troopers. They are important to you as they can provide much-needed bonuses and abilities. Each Company Commander has vital talents involving Fire Combat (F), Close Combat (C), and Save Attempts (S). How you use these talents will be key to your victory or defeat.

1) Commander Assignment

During the Commander Assignment Phase, determine where each Company Commander marker is assigned for the upcoming Game Turn. A Commander can be deployed to the battlefield and lead their troopers from the front (by attaching directly to a Volter unit in its Company) or stay back in their headquarters and coordinate the assault from a more strategic command and control vantage point (by taking up position in the Company's HQ Box). This deployment can change with each turn.

2) Attached Company Commander Abilities

If the Company Commander marker is attached to a specific Volter unit, you place the marker into the space with that unit. The Commander is now leading from the front rank of the unit – Lightning Sword in hand! You may use any one of the following Attached Company Commander abilities at the time indicated for the action. In all cases, flip the Commander marker over to its "Used" side after the ability is applied. Note that an attached Company Commander marker may be eliminated due to combat results.

a) Follow Me!: During any one of the attached unit's activations, you may discard the drawn Action Card for that unit's activation result (only) and draw a new one. The new card must then be used for the unit's activation result. You cannot re-draw Events, Random Numbers, etc.

a) Defense Perimeter: If the attached unit receives one or more Hits for any reason, you may make a Save Attempt for each Hit received from one event or single round of combat. You may draw a Random Number and if the number is equal to or greater than the "S" value of the attached Company Commander marker, that Hit is cancelled. If the unit receives 2 Hits from one source, you draw a separate Random Number for each Hit.

b) Volters Lead The Way!: If the attached unit is conducting Close Combat, you may add the Company Commander marker's "C" value to its Close Combat Net SP total. This bonus is in effect for all rounds of the same Close Combat.

c) Rally on Me!: You may immediately remove a "Shocked" marker that the attached unit had when the Company Commander marker attached to it or immediately after the unit receives a Shocked result from any source.

d) Fire Control: If the attached unit is conducting Fire Combat, you may add the "F" value of the attached Company Commander marker to the unit's Net SP.

3) Company Commander HQ Abilities

If the Company Commander marker is assigned to the Company's HQ Box, you may use any one of the following Company Commander HQ Abilities at the time indicated for the action. In all cases, flip the Commander marker over to its "Used" side after the ability is applied. Note that a Company Commander marker in its HQ Box cannot be eliminated.

a) Plan of Attack: During any one of the Company's unit activations, you may discard the drawn Action Card for that unit's activation result (only) and draw a new one. The new card must be used for the unit's activation result. You cannot re-draw Events, Random Numbers, etc.

b) Open Fire!: Before drawing an Action Card to resolve the next activation for a unit in the Company, you may have all units in the active Company (only) issue Fire Combat. This includes units that are Spent. Resolve the combats unit by unit in any order you choose.

c) Skybreach Support: You may request support from the Starcruiser Skybreach, but only if it is not Destroyed or Disabled. You must announce and use the chosen ability before drawing an Action Card to resolve the next activation for a unit in the Commander's Company. Choose any one of the three eligible abilities listed below:

  • Rain of Missiles Bombardment: You may place up to two random, facedown Support Fire markers on any alien unit(s) located in one ADEZ space in the Commander's Company Zone. Remember that there can be no more than two markers per unit.
  • Replacement LSP: You may replace one LSP marker belonging to the Company that was eliminated or you may fix one that is Disabled. Place the replacement for an eliminated LSP marker in the RDZ space of the empty column. Fixing a Disabled LSP marker simply flips the marker back over to its operating side.
  • Replacement Squad: You may replace any one eliminated Volter unit with a new one of any type up to the counter limits (six Ranger units, four Scout units and three Heavy Weapons units), except for a Terran Guard unit (they may never be replaced). This replacement unit enters the game with one Hit and is placed in the empty column's RDZ space, along with its LSP marker. The unit is then marked "Spent" and cannot activate this Game Turn.

Example: Moe's Comet Company is getting crushed! He's lost two Heavy Weapons units and only has a Ranger unit remaining. None of the Doomsday Device markers have been revealed so he really needs to do something. He assigns the Company Commander, Kennedy, to the Comet Company HQ Area during the Commander Assignment Phase. Then, before he draws an Action Card for the Ranger unit, he chooses to use a Skybreach Support action and calls up a Replacement Squad. Moe decides to bring on a Scout squad, as it tends to move faster and can Scan. He places the Scout unit in an empty column's RDZ space in the Comet Company Zone. The Scout unit is flipped to its Step 3 side (because it must be assigned a Hit), placed on top of the LSP marker in that space and finally gets a "Spent" marker. Next Game Turn, this unit will be pushed hard to get to the other end of the map in the hopes that it can get to the DDZ space in its column quickly.

O) Victory Score

If you finish playing the entire Countdown Game Turn #1 without having the Doomsday Device explode, YOU WIN! Congratulations! If you'd like to know how well you did while winning the game, go down the Victory Point (VP) list below and total up your VP score based on the situation in the game at the moment it ended. Of course, you could check your VP total even if you lose. If you decide to do so, then deduct another -50 VP for allowing the planet to be destroyed.

  • +1 VP per SP on map in Red Approach Zone
  • +2 VP per SP in captured ADEZ spaces
  • +3 VP per SP in captured DDZ spaces
  • +5 VP if Warlord unit eliminated
  • +3 VP per "Fermitian Plan of Attack" and "Fermitian Rebel Leader" Special VP Marker captured
  • +5 VP per "Orion's Belt" and "Advanced Alien Tech" Special VP Marker captured
  • -2 VP per Fermitian SP on map
  • -4 VP per Special Alien SP (Kondor, Mushroom Dome, or Groundhog) on map
  • -5 VP per Company Commander eliminated

Victory Point Table

Find the total number of VP you scored per the schedule above and cross reference it on the Victory Point Table below.

  • 120+ = Savior of all Creation!
  • 100 - 119 = Protector of the Universe!
  • 80 – 99 VP = Hero of the Milky Way Galaxy!
  • 60 – 79 VP = Champion of the Solar System!
  • 40 – 59 VP = Icon of Earth
  • 20 – 39 VP = Pride of the Country
  • 10 – 19 VP = Job Well Done
  • 0 – 9 = Thanks for your Service
  • < 0 = Lucky Dog

P) General Setup

OK – you are ready to play, right? Good! So, first pick a scenario and a play mode. The default play mode is Solitaire but you can play with one or two other players, Cooperatively or Semi-Cooperatively. Take the game map for the scenario you chose and place it smack dab in front of you. Then go through the following steps to get the game ready for play. The scenarios will have different setups and those differences are detailed in section Q.

  1. Shuffle the 27 Action Cards and place them face-down in any convenient area to form a draw pile. Leave room to the right of this pile for the discard pile.

  2. Take out the 22 large Fermitian Army Cluster and Alien Mercenary Units and place them into the container. Make sure that you do not include the two replacement Colossus Mercs counters (representing Steps 1 and 2 for those units) nor the six Special Alien Unit counters (two each of the Mushroom Dome, Groundhog, and Kondor units). Leave all those aside. The 4 Elite Fermitian units (the Pulsar Berserkers and Venom Fire Team counters) are handled differently in each scenario.

  3. Draw a Random Number from the Action Card deck and place the Warlord unit into the ADEZ space in the same-numbered column. The Warlord always starts the game with its "arrow" pointing to your right. Discard the Action Card into a discard pile to the right of the draw pile.

  4. Take all 24 Support Fire markers, place them so that only the front (common) side is face-up and mix them around. Draw another Random Number and halve it (rounded up). Then place that same number of randomly drawn Support Fire markers face-down (so you don't see their backside value) on any alien you wish, but no more than two markers per unit. Leave the remaining markers face-down in a pool in a convenient area.

  5. Take the 15 Doomsday Device markers, place them so that only the front (common) side is face-up and the actual value of the counter is hidden. Mix them around and then place one in each of the nine DDZ spaces. The remaining six markers should be put aside but still with their common side face-up.

  6. Place the Game Turn marker in one of the spaces on the Game Turn Track depending on your desired level of difficulty. This designates the starting Game turn for the

difficulty. This designates the starting Game turn for the scenario being played, as follows:

  • Easy Level: Place the marker in the "1" space.
  • Standard Level: Place the marker in the "2" space.
  • Brutal Level: Place the marker in the "3" space.
  1. Place the Doomsday Device Trigger marker in the "0" space of the Doomsday Track.

  2. Take the Skybreach Disabled/Destroyed marker and keep it nearby.

  3. Place the Spent and Active Unit markers next to the game map. All other markers should be kept within easy reach.

  4. Volter Unit Deployment: You will now deploy your nine Volter units (three units per Company and one unit per space in the RDZ). The exact makeup of your force (types of units) is entirely up to you, keeping within the Volter Unit counter limitations.

a) Choose any mix of 9 Volter units of any types. A Company can even be made up of three units of the same type if you wish. However, there is an overall counter limit for each type of unit – 6 Rangers, 4 Scouts and 3 Heavy Weapons.

Standard Inter-Galactical Tactical Regulations call for the left flank unit to be a Scout Squad, the center to be a Rangers Squad, and the right flank a Heavy Weapons Squad. But it is common practice for Company Commanders to vary this standard deployment to suit the particular conditions of the battle at hand. So, a player may use any mix that they find suits the tactical situation.

b) Place each of the units into their RDZ space - one unit per space.

c) Place one LSP marker in each of the nine RDZ spaces. Each LSP marker is assigned to "supply" the Volter unit that shares the same column with it.

d) Finally, assign one Company Commander marker to each of the three Volter Companies (Asteroid, Black Hole, and Comet for the Mars map or Deimos, Earthling, and Fission for the Moon map). There are six available Company Commander markers and you can either choose the three you want or, for more fun, randomly pick the markers and randomly assign them. Place the chosen markers in the appropriate HQ Box on the map for now.

Q) Scenarios

Volters Lead the Way! offers three different scenarios to play. Choose one and make the necessary adjustments to setup and/or game play as indicated in each scenario section.

1) Martian Mayhem Scenario

This scenario uses the Mars Map and simulates the desperate struggle to save the planet from destruction. Use the normal General Setup instructions as detailed in section "P" above except:

a) Add the four Elite Fermitian units to the container with the alien unit counters already in there. Then mix all 26 units together and then randomly place nine of them onto the map, one in each of the nine ADEZ spaces. These units are placed with their "Step 2" sides face-up. If you don't like some of the units deployed, you may "mulligan" one or more units by removing that unit and then drawing a new one from the container. However, for each alien unit you replace, increase the Doomsday Trigger marker one space on the Doomsday Device Track.

b) You may not choose to deploy the Terran Guard Volter units in this scenario.

c) Martian Colonist Settlement Markers: Deploy up to five Martian Colonist Settlement markers onto the map. The procedure is as follows:

  • Draw two Random Numbers – the first number pertains to the Column Number and the second one to the Row Number.
  • Cross-reference the Column and Row Numbers and place a Martian Colonist Settlement marker in the resulting space unless there is already a Settlement marker in that space or if it is a Martian Canal space. In those cases, the new marker is discarded and not used in the scenario (do not draw a replacement card for this marker).
  • Repeat this procedure four more times (for a total of five times).
  • Then place all of the drawn cards back into the deck and shuffle the cards.

2) Lunar Lunacy Scenario

This scenario uses the Moon Map and simulates the rapid deployment of three Companies of the 324th Volter Regiment after discovering a secret Fermitian force had landed on the Moon. Use the normal General Setup instructions as detailed in section "P" above except:

a) Use only the 22 large Fermitian Army Cluster and Alien Mercenary Units in the container. Do not use the four Elite Fermitian units in this scenario. Mix them up and randomly place nine of them onto the map, one in each of the nine ADEZ spaces. These units are placed with their "Step 2" sides face-up.

b) Then deploy one random Fermitian unit in each of the three Escarpment Strongpoint spaces on the map. These are in addition to the nine Fermitian units you will deploy per the normal procedure. If you don't like some of the units deployed, you may "mulligan" one or more units by removing that unit and then drawing a new one from the container. However, for each alien unit you replace, increase the Doomsday Trigger marker one space on the Doomsday Device Track.

d) Note that a Kaots Mercs unit will not move during the Warlord/Kaots Patrol Phase if it is deployed into an Escarpment Strongpoint space during setup.

e) Research Station Markers: You will deploy up to five Research Station markers onto the map. The procedure is as follows:

  • Draw two Random Numbers – the first number pertains to the Column Number and the second one to the Row Number.
  • Cross-reference the Column and Row Numbers and place a Research Station marker in the resulting space unless there is already a Research Station in that space, if the space is an Escarpment Strongpoint or if the space is a Lunar Sea space. In those cases, the new marker is discarded and not used in the scenario (do not draw a replacement card for this marker).
  • Repeat this procedure four more times (for a total of five times).
  • Then place all of the drawn cards back into the deck and shuffle the cards.

3) Defending Sol Scenario

For this scenario, you will actually play two consecutive games of Volters Lead the Way!. For the first game, play the Martian Mayhem scenario to completion. If you win that scenario – and only if you win – play the Lunar Lunacy scenario. You can choose any eligible units you wish for the second game, however, any units that you choose that actively played in the first scenario enter this game carrying any Hits that they received from the first game (like a mini-campaign). Eliminated units cannot be used in the second scenario. If you win the second game, total up all the VPs you scored from both games and see if you can beat your previous high scores.

R) Player Modes

Volters Lead the Way! is designed to be played as a one-player (solitaire) game and all of the standard rules are written based on this default mode of play. However, you may also include one or two friends in the experiences as noted below.

1) 2-Player Cooperative Mode

In this mode, each player selects one of the three Companies to control. The third Company will switch control back and forth between the two players – one player controlling the Company on even-numbered turns and the other on odd-numbered turns. Decisions associated with Event implementation and other game activities that are not related to just one Company are decided upon together. Alternately, players can agree to control the third Company together, making decisions for the Company cooperatively.

2) 3-Player Cooperative Mode

Each player controls one of the three Companies in the game. Player order is decided mutually by the player and decisions associated with Event implementation and other game activities that are not related to just one Company are decided upon together as well.

3) Semi-Cooperative Mode

In this unique mode, players play the 2- or 3-player modes as described above except each player maintains their own Victory Point award tally. In the case of killing the Warlord, the player whose unit achieves that goal gets the VP. The same goes for captured Special VP markers. As far as penalties for Fermitian units on the map, the players whose Company Zone contains those units is the one penalized. If the players win the game, then the player with the highest VP total is deemed the actual victor of the game. If the players lose, they lose together and no one wins the game.

Section S (Designer's Notes) is the designer's commentary on theme and design rather than rules, and is left out here. The playtest credits and designer sign-off are attribution and are also left out.

Event Descriptions

Fermitian Event Descriptions

Note that Spent units can be affected by these events if otherwise eligible.

  • Alien Drop Ships Land: Draw a random unused Fermitian unit and place it in the ADEZ space with the lowest number of printed Fermitian SP in it. For units with two values, use the higher SP. A Volter-occupied space is always considered to have the fewest SP and if the new alien is placed in such a space, it will immediately attack in Close Combat with a +3 SP bonus. The new alien will not land in a space if the Volter unit is in the DDZ space of that column. If more than one space qualifies, you choose.
  • Anti-Orbital Fire: Draw a Random Number. If "6 or 7" is drawn, the Skybreach is Disabled. Place the Skybreach Disabled marker nearby as a reminder. You may not use any Skybreach Support options for the remainder of this Game Turn. If you draw a "8 or 9", the Skybreach is Destroyed. Place the Skybreach Destroyed marker nearby. You may not use any Skybreach Support options for the rest of the game.
  • Blessed Be The Volters: Draw an Action Card and apply the Volter Event instead.
  • Cloaking Device: Place the "Cloaking Device" marker next to the Action Card deck. For the remainder of this Game Turn, Scout units may not use Scan (treat as "no effect" if chosen) and all Volter units' printed SP are halved (rounded up) when issuing Fire Combat (only). After placing down the marker, select any one face-up Doomsday Device marker (if any), flip it face-down and place it back with the unused pool of Doomsday Device markers. Randomly select a new Doomsday Device marker from the pool and place it face-down back into the same DDZ space. This marker is now unknown to you. If there is no face-up marker, then this portion of the event has no effect.
  • Deploy Minefield: If drawn during a Company Activation, place a Minefield marker in the next higher-numbered row in front of the most advanced unit in that Company that is not in Row 9 or an ADEZ space. If drawn at any other time, randomly select a Company in front of which to deploy the Minefield marker as above. Minefield markers cannot be placed in an ADEZ or DDZ space. The Minefield occupies the marker's space plus the adjacent spaces to the left and right. Upon a Volter unit entering a Minefield space, it is attacked with a "6 SP" Fire Combat attack. If a Hit is scored, the moving unit is also Halted and the Minefield marker is removed. Otherwise, the unit continues and the Minefield marker remains. If all Minefield markers are in play or the marker can't be placed, draw another Event.

Volter Event Descriptions

Note that Spent units can be selected for these events if otherwise eligible.

  • Alien POWs: Reveal any one face down Doomsday Device marker on the map and leave it face-up. It is now eligible to be selected during the Doomsday Phase. If it's a Sentry marker, also immediately draw a Fermitian Event.
  • Company Surge: Select any Company. All units in that Company may immediately move one space (unless Shocked). The unit may enter a Chasm space with this event. Resolve any resulting Close Combat immediately.
  • Deep Craters: Take a Deep Craters marker and place it in any Volter unit's space. This marker provides a "6+" Save Attempt to any unit occupying this space. Ignore Panic result and Mind Terror Generator event. Remove marker if the unit moves out.
  • God Is An Alien: Draw the top Action Card and apply the Fermitian Event instead.
  • Jet Packs: Select any Volter unit and move it up to two spaces, jumping over any obstacles, markers or units. It may not jump over an ADEZ space but may jump into one and then Close Combat with a +3 SP modifier. Heavy Weapons units may not use this ability.
  • LSP Emergency Protocols: You may either reactivate a Disabled LSP marker (flipping it back over) or move any one LSP marker up any distance (even if Disabled).
  • Saturation Fire: Choose any Company. Each Volter unit in that Company may immediately issue a free Fire Combat.
  • Steel Rain Barrage: Draw two Random Numbers and place one random, facedown Support Fire marker on an eligible alien unit in those same numbered ADEZ spaces. If no alien unit is in the ADEZ space, then the marker is lost with no effect.
  • Triage Drone: Select any one Volter unit and remove up to 2 Hits from it.
  • E.M.P. Device: Draw a Random Number and find that same numbered Area. All LSP markers in that Area are flipped to their "Disabled" sides. If already Disabled, they are eliminated instead.
  • Groundhog Launched: Draw a Random Number and find that same numbered column. If the column does not have a Volter unit in it or the unit is in the DDZ, draw another Random Number. The Groundhog marker starts in the ADEZ space of that column and moves down the column until it reaches a Volter unit. Resolve a Close Combat with the Groundhog's SP equaling the color of the Approach Zone in which the combat occurs. The Volter may not opt to retreat from a Groundhog, so this combat will continue until either unit is eliminated. If the Groundhog wins, it remains in the space and can only be attacked again using Close Combat (it may not be the target of Fire Combat). If both markers are in play, draw another Event.
  • Habneros Gas: Draw a Random Number and find that numbered Area. Place the Habneros Gas marker on the center space of that Area. All Volter units in that Area are attacked during the next Alien Onslaught Step with a "7 SP" Fire Combat (even in a Martian Canal space). Remove the Gas marker after the Alien Onslaught Step.
  • Kondor Sortie: Draw a Random Number and find that same-numbered Area. Place the Kondor unit on the most-advanced Volter unit or LSP marker in that Area (player choice if more than one). Fight a Close Combat of one round (only) against that Volter unit. If the Kondor attacks an LSP, the marker defends itself with "0" SP. If Hit, the LSP is destroyed. Remove the Kondor after the Close Combat (keeping any Hit it may have received) but place it nearby. It will attack again in a random Area during the next Alien Onslaught Step until eliminated. If there are no Volters or LSPs in the Area, nothing happens. If both Kondor markers are in play, draw another Event.
  • Laser Volley: If drawn during a Company Activation, each Fermitian unit in the active Company's Zone issues Fire Combat. If drawn at any other time, randomly select a Company and that Company is attacked with Fire Combat. Each affected alien unit will issue Fire Combat at the unit in its column.
  • Mind Terror Generator: If this event is drawn during a Company Activation, units of that Company in the Red AZ are marked Shocked; units in the Yellow AZ are marked Spent; units in the Green AZ are retreated one space (along with the LSP marker, if necessary). Units in a Deep Crater marker or a unit using a Volter's Ho! marker are not affected by this event. If drawn at any other time, randomly select a Company and that Company is affected as above.
  • Mushroom Dome Deployed: If this event is drawn during a Company Activation, place a Mushroom Dome marker in the active Company's Zone. It is placed in the ADEZ space opposite the most advanced Volter unit, but do not include ADEZ spaces that are currently Volter-controlled. If drawn at any other time, randomly select a Company in front of which to deploy this marker. If both Mushroom Dome markers are already in play when this is drawn, draw another event.
  • Short Fuse: Immediately advance the Doomsday Device Trigger marker up one space on its track.
  • Star Fighter Raid: Draw a Random Number. If a "5 through 8" is drawn, the Skybreach is Disabled; if a "9" is drawn, the Skybreach is Destroyed. See the "Anti-Orbital Fire" event above for application details.
  • Unexpected Chasm: Place a Chasm marker in the space in front of the active unit if drawn during a Company Activation. If drawn at any other time, place it in front of the most advanced Volter unit on the map not in a DDZ space. If multiple options, pick a space with a Doomsday Device marker in it. Otherwise, you choose the space. Units need a "Move 2", "Move 2 + Hit" or "Move 1 + Hit" result or a Company Surge or Jet Packs Event to enter a Chasm space. If the marker is entered or jumped over, remove marker. If all Chasm markers are in play when this drawn, draw another Event.
  • Venom Drone Strike: Draw a Random Number to get an Area. All Volter units and LSP markers in that Area are each attacked with a "6 SP" Fire Combat (even in a Martian Canal space). If a LSP marker is hit, flip it to its "Disabled" side. A Disabled LSP marker is eliminated if Hit.
  • Volters Ho!: Take a Volters Ho! marker and attach it to any one Volter unit. The marker can be used to automatically Save, ignore Mind Terror Generator event, redraw an activation Action Card, cancel Shocked or +2 SP in Combat.