Topps Attax
Topps Attax Rulebook
Table of Contents
Table of Contents
ATTAX Major League Rules
Play 3 innings of baseball... the team with the most runs scored wins!
1 Set Up
Each player needs 25 Batters, 3 Pitchers, 1 Mascot, and 1 Ballpark card. Separate each into piles.
You cannot have two cards of the same player on your team during a game.
Both players put their 3 Pitchers on the Bullpen spots on the game mat.
Both players put their Mascots face down on their Mascot spots on the game mat. Don't show your Mascot to the other player!
Both players shuffle their Batters and put them face down on their Team Deck spots on the game mat. This is your deck. All cards you take during the game will be picked from this deck.
The total star count on all cards in your deck can't be above 100. This is an official tournament rule; you and your friends can decide if you want to use it or not.
2 Start the Game
Flip a coin. The winner's Ballpark is put face up on the Ballpark spot on the game mat and will be the home field for the whole game. The other player will bat first and removes his/her Ballpark from the game.
Both players take 4 cards from the top of their Team Decks and put them into their hands. Players will take 4 cards this way at the start of the top and bottom of every inning (each time the batting player and the pitching player get three outs and the teams switch sides).
The pitching player selects a starting Pitcher and places him face up on the Pitcher's Mound.
Before each and every Batter is chosen and put on the field by the batting player (even the first Batter of the game), both players take 1 card from the top of their Team Decks and put them into their hands.
The batting player then picks a Batter from the cards in his/her hand and puts it face down on Home Plate.
3 Pick Your Pitch
The Pitcher is put face up on the Pitcher's Mound.
Each Pitcher pitches only one inning and will not pitch again for the rest of the game.
After the batting player has picked a Batter, the pitching player calls a pitch: a Fastball, Change-Up or Specialty.
You can never call the same pitch for two batters in a row.
Pitch scores shown on the rules sheet: Fastball 61, Change-Up 89, Specialty 90.
4 How to Get Hits and Outs
After the pitching player calls a pitch, the Batter is turned face up.
Compare the Pitcher and Batter's scores for the called pitch.
You can change Pitcher and Batter scores by using offensive (green) and defensive (red) player abilities.
See the "How to Change Pitching and Hitting Scores" rules below.
If the Batter's score is:
- Lower than the Pitcher's score, the Batter is struck out and is moved to the Dugout.
- Tied with the Pitcher's score, the Batter walks to First Base.
- Higher than the Pitcher's score, the Batter hits the ball.
If a Batter gets a walk, defensive (red) & offensive (green) abilities cannot be used.
If the ball is hit, the pitching player can use defensive (red) fielding abilities to get the Batter out. See the "How to Use Fielding Abilities" rules below.
If the pitching player can't get the Batter out by defensive (red) fielding abilities, look at the Batter's hit diamond, and move him onto the base shown.
The hit diamond shows one of four results: SINGLE, DOUBLE, TRIPLE, or HOME RUN.
Other Batters on base advance the same number of bases as the hitter (if the hit is a double, each advances 2 bases; if a single, each advances 1 base, and so on).
When the batting player gets three outs, it is now the pitching player's turn to bat.
Each time a batting player gets three outs, both players put all the cards from their hands into their Dugouts.
Both players then take 4 new cards from their Team Decks and put them into their hands.
If your Team Deck is empty, shuffle your Dugout, then put these cards on your Team Deck spot on the game mat. This becomes your new Team Deck to take cards from.
Innings and Scoring
- After a Batter scores a run, move him to the Dugout.
- When both players have had 3 outs at bat, the inning is over.
- If there is a tie after 3 innings, go into extra innings until there is a winner.
- Use coins or dice to keep track of the score, outs and innings on the game mat.
How to Change Pitching and Hitting Scores
You can change Pitcher and Batter scores by using offensive (green) and defensive (red) abilities.
Use a Batter's offensive (green) ability while he is at bat by reading and following the ability on the card.
Use the pitching Pitcher's defensive (red) ability by reading and following the ability.
Look at the cards in your hand. Some cards have abilities that can change scores. The batting player can use offensive (green) abilities, and the pitching player can use defensive (red) abilities. To use an ability, show the card to your opponent, read the ability and do what it says. Then put this card from your hand into your Dugout.
Some Mascots can change pitch and hit scores when they are turned face up and "enter the ballpark." See the "Mascot Special Abilities" rules.
How to Use Defensive (Red) Fielding Abilities When the Batter Hits the Ball
When a Batter hits the ball, the pitching player can field the ball to get the Batter out.
Look at the cards in your hand. Some have defensive (red) fielding abilities. To use a defensive (red) fielding ability on a card, reveal that card to your opponent and read the ability. Then put this card from your hand into your Dugout.
Only one defensive (red) fielding ability can be used each at bat (unless the ability says you can use another one).
If the defensive (red) fielding ability gets the Batter out, move the Batter to the batting player's Dugout. Any Batters already on base then advance 1 base. Batters on base do not move if the batting Batter is struck out.
If the pitching player uses a defensive (red) fielding ability to get the 3rd out, Batters already on base cannot score.
Unless otherwise stated, all HRs are out-of-the-park HRs. When a batter hits an out-of-the-park HR, only fielding can be used that specifically mentions HRs.
Mascot Special Abilities
Each Mascot has two special abilities:
- The first ability is used by turning the Mascot card face up during an at-bat, thereby having him "enter the ballpark." When the Mascot card is turned face up, it stays that way for the rest of the game, and its first ability can only work that one time (unless another ability says to turn it face down so that you are able to use its first ability again).
- The second ability repeats each inning ONLY IF your Mascot card is already face up.
- Mascot cards never go to the Dugout.
Ballpark Special Abilities
At the beginning of the game, the winner of the coin flip puts his/her Ballpark card in play as the home field. The Ballpark won't change for the whole game.
Remember to look at the abilities on the Ballpark card and follow what it says during the game. These special abilities work on both players.
The ATTAX Card
The card layout is labelled on the rules sheet as follows: Team; Position; Player; Hit Diamond; Offense Ability (green); Defense or Fielding Ability (red); Hit & Pitch Scores (Fastball, Change-Up, Specialty); Hit & Pitch Types; Card Number; Star Count; and Rarity.
Rarity colours: Black = Common; Silver = Uncommon; Gold = Rare; White = Ultra Rare.
Note: on the rules sheet's example card (Robinson Cano), the text of the first offensive ability is partly covered by a callout label. The legible part reads "Solo Homer: If the ba[...] instead of triples." The obscured words are not transcribed here.
The example card's defensive ability reads "Relay Man: Draw a card, then you may play a[...] defense card."
Home Run Derby Rules
Don't have time to play the Major League Rules? Try the Home Run Derby Rules... a quick, simple game where players compete to score the most runs!
Getting Started
- Each player chooses 9 Batters and 3 Pitchers.
- Flip a coin. The winner bats first – the other player pitches first.
- The batting player puts the 9 Batters into their hand and puts the Pitchers in the Bullpen.
- The pitching player puts the 3 Pitcher cards into his/her hand and puts the Batters in the Dugout.
Playing the Game
- The pitching player picks a Pitcher and puts it face up on the Pitcher's Mound.
- The batting player picks a Batter from the cards in his/her hand and puts it face down on Home Plate.
- The pitching player calls a pitch: Fastball, Change-Up or Specialty.
- The Batter is turned face up; compare the Pitcher and Batter's scores for the called pitch.
- If the Batter's score is equal or higher than Pitcher's score, the Batter hits and scores!
- If the Batter's score is lower than Pitcher's score, the Batter is out and does not score.
- After the Batter has batted, he goes to the Dugout and won't bat again this game.
- Repeat this two more times. Use a new Pitcher and Batter each time.
- Remember, each Pitcher can only be used once per inning.
- After the batting player has batted 3 times, switch! It is now the pitching player's turn to bat.
- When each player has batted three times, the inning is over.
- Complete 2 more innings the same way.
- Once all 9 Batters have batted, 3 innings are finished and the game is over. The player who scored the most runs wins!
- If the game is a tie, players can go into extra innings. Each player selects 3 Pitchers and 3 Batters and plays a complete inning to break the tie.