RulesPal
Chat
Rulebook
Test of Faith: The Arab-Israeli War of 1973 thumbnail

Test of Faith: The Arab-Israeli War of 1973

Test of Faith: The Arab-Israeli War of 1973 Rulebook

Table of Contents

Table of Contents

  • Introduction
  • 1.0 Game Components
    • 1.1 Map
    • 1.2 Player Aid Cards
    • 1.3 Air Displays
    • 1.4 Counters and Markers
    • 1.5 Counter & Game Abbreviations Used
    • 1.6 Dice
  • 2.0 Game Setup
  • 3.0 General Concepts
    • 3.1 Sides
    • 3.2 Forces
    • 3.3 Condition of Forces
    • 3.4 Movement
    • 3.5 Stacking
    • 3.6 Lines of Communication (LOC)
    • 3.7 Zones of Control
    • 3.8 Infrastructure and Supply
    • 3.9 Control of Hexes
    • 3.10 Random Events
    • 3.11 Weather
    • 3.12 Turn Structure
  • 4.0 The Strategic Phase
    • 4.1 Check Communications
    • 4.2 Place Arriving Reinforcements
    • 4.3 Air Allocation Phase
    • 4.4 Supply and Infrastructure Phase
  • 5.0 Arab Activation Phase
  • 6.0 Israeli Activation Phase
  • 7.0 Activation Sequence
    • 7.1 HQ Activation Segment
    • 7.2 Unit Activation Segment
    • 7.3 Initial Movement and Combat Declaration Segment
    • 7.4 Reaction Movement Segment
    • 7.5 Secondary Movement Segment
    • 7.6 Combat Segment
    • 7.6.4 Determine Combat DRMs
      • 7.6.4.1: Size Support and Terrain DRMs
      • 7.6.4.2 Sagger ATGMs
    • 7.6.4.3 Hull Down Israeli Tanks
    • 7.6.4.4 Dug In Arabs
  • 8.0 End Phase
    • 8.1 Eliminate Friendly Units Phase
    • 8.2 Victory Check Phase
      • 8.2.1 Objective Markers
      • 8.2.2 Victory Point Awards
      • 8.2.3 Maximum Victory Point Totals
      • 8.2.4: Objective Marker Segment
      • 8.2.5 Politics Phase
      • 8.2.6 Victory in the Campaign Game
        • 8.2.6.1 Automatic Victory
        • 8.2.6.2 Political Victory
    • 8.3 Politics Phase
  • 9.0 Infrastructure and Supply Phase
    • 9.1 Supply Points
    • 9.2 Supply Costs
    • 9.3 Supply Phase End
  • 10.0 The Air Game
    • 10.1 The Air Allocation Phase
    • 10.2 Air Forces Commitment Phase
    • 10.3 Air Mission Resolution Phase
    • 10.4 Activation Phase Mission Resolution
      • 10.4.1 Interdiction Missions
      • 10.4.2 Interdiction Resolution
    • 10.5 SAM Fire
      • 10.5.1 SAM Support Markers
      • 10.5.2 SAM Coverage
  • 11.0 Morale
    • 11.1 Disrupted Units
    • 11.2 Routed Units
    • 11.3 Low Morale
  • 12.0 Headquarters
    • 12.1 Communication Trace
    • 12.2 HQ Displacement
  • 13.0 Markers
    • 13.1 Cup of Snafu Markers
    • 13.2 Loss markers
    • 13.3 Air Game markers
    • 13.4 Status Markers
    • 13.5 Combat Markers
    • 13.6 Miscellaneous Markers
  • 14.0 Special Units and Leaders
    • 14.1 Reconnaissance Units
    • 14.2 Amphibious Units
    • 14.3 269 S Matkal (Israeli Special Forces)
    • 14.4 Leaders
      • 14.4.1 Theater Commanders
        • 14.4.1.1 Israeli Theater Commanders
      • 14.4.1.2 Arab Theater Commanders:
      • 14.4.1.4 Special Israeli Leaders
        • 14.4.1.4.1 Ariel Sharon
        • 14.4.1.4.2 Zvika Greengold
  • 16.0 Additional Support Assets
    • 16.1 Transport Support
      • 16.1.1 Using Air Transport
      • 16.1.2 Air Resupply
      • 16.1.3 Air Transport Movement
      • 16.1.4 Raids!
      • 16.1.5 Ground Transport
    • 16.2 SSM Support
    • 16.3 Nuclear Weapons Support
    • 16.4 Engineer Support
  • 17.0 Politics
  • 18.0 Mount Hermon Observation Post
  • 19.0 The Suez Canal
    • 19.1 The Egyptian Crossing of the Suez
    • 19.2 Israeli Crossing of the Suez
      • 19.2.1 Using Bridge Assets To Cross the Canal
        • 19.2.1.1 Boats
        • 19.2.1.2 Uniflote and The Roller Bridge
        • 19.2.1.3 Timsach
        • 19.2.2 Israeli Amphibious Assault.
  • 20.0 Miscellaneous Rules and Units
    • 20.1 Bar-Lev and Outpost Garrisons
    • 20.2 Israeli Remnant Units
    • 20.3 Situational Unit Activations
      • 20.3.1 Arab Activations
      • 20.3.2 Israeli Activations
  • 23.0 Clarifications and Corrections
  • Official Errata (15 November 2023)

Introduction

The 1973 conflict between the forces of Israel and the forces of the Arab countries, known by the names "The Yom Kippur War", "Ramadan War", or "October War", was a key moment in determining the future of the entire Middle East. Fought from October 6, 1973 to October 25, 1973, a coalition of Arab States, led by Egypt and Syria, launched a massively successful surprise attack on the Israeli occupied territories in an attempt to recapture lands lost in the 1967 war. After recovering from the surprise attack, Israel regrouped and launched successful counterattacks on both fronts. Which side was victorious has been debated ever since the war but regardless, Israel's belief in her martial supremacy was shattered, and because of this, the political landscape was forever changed.

Test of Faith is a simulation of that conflict. Veterans of previous games in the Operational Scale Series will need to read these rules carefully as many rules have been updated to cover both the change in scale from other games in the series – as well as the asymmetrical nature of both armies in this battle. In general, each side will activate their units representing land army forces of the armies using HQs within range of that unit. They then will perform movement and combat with those active units once per game day. After all units have been active, or after both players have decided they do not wish to move any more units the Activation Phase is over. Once this happens, the turn is over, the day marker moves to the next day, and a new turn is begun. When the game rules have determined if the war has ended, or if either player achieves an automatic victory, the game is over, and the winner is determined.

At the end of these rules is a comprehensive Example of Play. Players are encouraged to read this first to get a feel of how the game works, then to read the rules keeping the example as a reference for any rules that might be confusing to the player.

1.0 Game Components

1.1 Map

The 3 maps in A Test of Faith include the area upon which the Yom Kippur War of 1973 was fought. There are two that cover the Sinai campaign (called North Map and South Map) and one map that covers the fight in the Golan. The maps point directly north. West as defined by these rules are the two hexes to the northwest and southwest of a hex. East as defined by these rules are the two hexes to the northeast and southeast of a hex. This is important for several rules in the game.

The hex scale on the map is about 4 kilometers.

[Diagram: a hex with North at the top; the two hexes to the northwest and southwest are "West hexes", the two to the northeast and southeast are "East hexes".]

1.1.1: There are several Supply Source hexes for the Israelis, all Arab forces on the Sinai front, and for specific Arab nations on the Golan front. These are used to determine communications during various phases of the game. The Arab supply sources on the Golan map may only be used by the forces of that supply source. All Arab supply sources on the Sinai map may be used by all Arab forces on those maps.

1.2 Player Aid Cards

The Player Aid Cards have several boxes and tracks useful for managing the game.

1.2.1: The Replacements, Infrastructure and Supply Track is where you monitor your side's war-fighting resources. Infrastructure, Replacements, and Supply markers are tracked by side. The track shows the minimum and maximum values for Infrastructure and Replacements. Unless indicated on the track, values have a minimum of 0 and a maximum of 15. Excess points of any type more than 15 or less than 0 are ignored.

1.2.2: Each country has a Support Level Track with markers for each type of Combat Support available. These represent the various types of equipment that might be used by a unit or side during the play of the game.

[Diagram: the Tank Losses, Replacements, Infrastructure, and Supply track showing values 0–15, with 15 the maximum for Replacements and Infrastructure; and the Equipment and Support Values track for Tanks, showing values 0–5 and beyond. Notes on the track: T34s can only use their Support value against non-tank supported units or ...]

Some units have both a primary type of equipment and a secondary type of equipment. The owning player may usually choose which type of equipment to use in a given situation. The markers' positions on the track determine what you have to roll with a D10 to have that type of equipment available to support a given combat. Note that these values are never reduced from game play. Loses are tracked on individual counters using specific markers for these losses.

In addition, the type of equipment used can alter certain other rules gaining additional benefits in movement, combat, or other uses. These are all explained in the rules of movement and combat.

[Diagram: Equipment and Support Values track, with Tanks, plus further equipment categories; T54 | T55 Vickers noted.]

[Diagram: Israeli & US Aircraft Capability Chart — Air-to-Air and Air-to-Ground columns listing each aircraft type (A4, F4, Sa'ar, F-4B, Mirage III, A7, Nesher) with its mission ability value.]

1.2.3: There are boxes for Replacements pending and Destroyed Units. Finally, there is a box for identifying the Theater Commanders.

1.3 Air Displays

Each side also has an Air Display. The Air Display is where you manage and fight the air war over the two theaters in which this war was fought.

1.3.1: The Aircraft Capability Chart lists the mission ability value of each kind of Aircraft for each type of Mission. The higher the value, the better that aircraft is at performing that type of mission. If an Aircraft is not listed next to a Capability, it cannot be assigned to that Mission. All Air-to-Air combat is performed using a D10; all other types of air combat (Air-to-Ground, SAM fire, etc.) are performed using a D6.

1.3.2: There are boxes representing the regions in which you may have Airfields. You will put each of your Airfield counters in one of the Airfield Boxes. Airfield counters in each box determine how many Missions you can fly.

[Diagram: Portion of Israeli air mission box for Golan theater — Combat Air Patrol (air-to-air combat) D10; Airfield Strike D6; SAM Suppression Strike D6; Nuclear Strike.]

1.3.3: There are mission boxes for each theater on the air display. Aircraft may only fly missions on the theater (Sinai or Golan) if they are in the appropriate box for that theater. Unlike previous games in the series, there is no strategic or tactical mission distinction in this game – all missions are either Air-to-Air Missions or Air-to-Ground Missions.

[Diagram: Israeli Available Aircraft and Damaged Aircraft boxes. Available Aircraft box contains an "Available for Transport" box. Damaged Aircraft box has "Damaged" and "Eliminated" columns; Repair: 7 or less D10; Recovery: 4 or less D10.]

1.3.4: There are boxes for Available and Damaged Aircraft. Damaged Aircraft will move to the Available Aircraft Box when repaired. When Missions are assigned, you will move Aircraft counters from the Available Aircraft Box to an Airfield counter, then to an appropriate Mission box.

1.4 Counters and Markers

The game comes with a variety of counters and markers for use in the game. Their use is explained in the appropriate rule sections below. In all cases, players may examine all of their opponent's forces and display tracks freely.

[Diagram: Counter key. Unit counter parts are labelled: Identification (e.g. 252nd); Command Range (the number in a red-outlined circle, shown on an HQ); Divisional Stripe; Unit Size Indicator; Independent Unit (no stripe); Infantry with APC Secondary Equipment; Unit with Primary Equipment-only; Unit with Primary & Secondary Equipment. A White Star indicates an Elite unit; a Red Circle indicates a Poor unit. Fresh and Spent sides of units are shown. Egyptian Infantry and Commando units are Sagger-equipped (7.6.4.2) and carry the Sagger symbol; Egyptian or Syrian units with the Sagger symbol receive a -1 Support drm. SAM units have a Front (Full Strength) and Back (Reduced) side; a Red Square indicates Immobile. Bar-Lev and Outpost Garrison counters appear as Fortress units. Bridge units show a Roller Bridge (Deployed on the reverse). Aircraft counters show Squadron ID, a Nuclear-capable symbol where applicable, and Aircraft Type; Full Strength and Reduced sides are shown for Fixed Wing and Helicopter units.]

1.5 Counter & Game Abbreviations Used

  • [ ]: Elements of the unit or replacement units
  • A: Armor
  • ABN: Airborne
  • AD: Armor Division
  • AE: Armored Engineer
  • AmR: Amphibious Reconnaissance
  • ArmSch: Armor School
  • AT: Anti-Tank
  • Ben-Khan: Lt. Colonel Yosi Ben-Khanan
  • CDO: Commando
  • D6: A six-sided die
  • D10: A ten-sided die
  • E: Engineer
  • GHQ: General Headquarters
  • HVY: Heavy
  • IAD: Iraqi Armor Division

1.6 Dice

Each player has a six-sided die (D6) and a ten-sided die (D10). Sometimes the use of a specific die is indicated in the rules; sometimes the player has a choice. Whenever you roll the D10, a "0" result is always a ten (10); not a zero. Whenever rounding, always round down to the nearest whole integer immediately when asked to do so (thus two halves of 5 would be 1: 5 halved is 2, 2 halved is 1).

2.0 Game Setup

Details for setting up the game are found in the scenario descriptions in the Scenario Booklet.

Players will also need several opaque containers, depending on the scenario being played, to allow random drawing of markers during play. All of those that might be used are listed below. Some of these might be omitted in scenario play (see the scenario set up rules for a complete list of containers needed).

  • All Cup of Snafu markers (see 13.0)
  • All Arab Objective markers (see 8.2.1)
  • All Israeli Objective markers (see 8.2.1)
  • All Israeli Combat Chits – Immediate and Determined (see 7.3.3)
  • All Arab Combat Chits – Hasty and Prepared (see 7.3.7)
  • Bar-Lev Garrison markers (for setup only; see 20.1)

3.0 General Concepts

3.1 Sides

The Arab Forces is a coalition of forces that consists of the Egypt, Syria, and several minor Arab Allies forces. The Israeli side consists of all the forces of Israel. These two overall player roles are called "sides" in the rules.

3.2 Forces

The game's counters represent the forces available to both sides in the war. Both players have Headquarters (HQs) and Units as land forces, along with Aircraft.

3.2.1: HQs represent the command, control, and logistics resources of the forces on the ground. HQs can move, but they cannot fight. Instead, HQs activate Units to move and fight, and provide communications support. Positioning HQs carefully is important because it determines which Units can be activated. HQs are not Units.

3.2.2: Units are the fighting forces on land. Units in the game are unusual in not having combat strengths and movement allowances printed on their counters. Movement rates depend on the type of movement being used, the type of unit moving, and the phase in which the unit is moving (see rule 7).

3.2.3: Aircraft represent squadrons (or other groupings of planes) of the same type. Aircraft counters are used to track the air strength each player assigns to various Air Missions over the theater. Aircraft can, among other Missions, fight in air-to-air combat, support ground units engaging the enemy, and attack the enemy's war-fighting Infrastructure.

3.3 Condition of Forces

Condition is the state of a given unit or HQ in the game. It is indicated by the face-up or face-down side of a counter, by markers placed on the counter, and by a counter's position in boxes on the map, player aid card, or air display. Changes in the condition of your forces are caused by their activities, the results of combat, or the amount of resources available to your side on a given turn.

3.3.1: Land forces on the map are either Fresh or Spent. Fresh Units have a lot more options than Spent Units, as explained in the rules below. Fresh units are the fronts of the counters. The backs of the counters show the spent side. These spent units have a diagonal stripe across the counter face for easy identification. Some units only have a spent side (and thus can't be active – like Israeli garrison and Bar-Lev units). In all cases, the back side of a unit is spent (even if there is no diagonal stripe for units that need their fronts to perform different purposes). Units become Spent after they are activated.

Units may also have different morale states: Disrupted, Routed, or may have Low Morale. Morale states are generally adverse and caused by retreats after losing a combat. Land forces can also:

  • be Low on/Out of Fuel or Ammo,
  • be Out of Contact,
  • have their equipment reduced or eliminated,
  • be reduced in size from combat or other loses,
  • (for Israelis) have their Equipment Enhanced or Reduced
  • Dug In (for Arabs) or Hull Down (for Israelis)
  • be a Poor/Elite Unit, and/or
  • have a Great or Poor Leader

3.3.2: When a Unit is eliminated (sent to the Replacements Box), remove all markers (including Great/Poor Leaders or Elite/Poor unit status) from it. An Elite unit or Poor unit that is eliminated (so marked on the unit itself with a star or a red dot) stays Elite/Poor when it returns (although this unit could become an Elite/Poor unit in play under certain circumstances, if it is eliminated, it will regain its original status if it returns to play).

3.3.3: Aircraft are either full-strength or reduced, depending on the counter side showing. The front side of the counter represents a full-strength Aircraft. The back side of the counters represent reduced aircraft and have a diagonal stripe across their face. Aircraft are also either damaged or undamaged, indicated by the box they occupy on their Air Display; undamaged planes are in the Available Aircraft box. These conditions are not dependent on each other—an Aircraft can be reduced and undamaged, or full-strength and damaged.

3.4 Movement

3.4.1: All Israeli units have an initial movement allowance of 6. All Arab units have an initial movement allowance of 4. While all hexes cost one movement point to enter for units with equipment, the terrain in the hex in which the unit is being activated or any hexes that the unit might move through, may reduce the number available to the unit. Players move one unit at a time and must complete initial movement of each unit before moving to another activated unit.

Leg units, those with no equipment, always spend two movement points to enter any hex and may not enter Road Column mode. They can only move in Cross Country mode. Note that these units can also move via Transport Support (see 16.1).

3.4.2: Movement is from hex to hex, paying one movement point (regardless of terrain in the hex) to enter each hex as you go. Leg units moving without transport, pay two movement points per hex (although they do not pay any additional movement for entering restricted terrain). Units in Road Column may (only) use the faster road movement rates. All units must be in either Cross-Country or Road Column to move. If a unit moves through a "restricted hex" (as noted on the TEC) at any time during its movement, its movement allowance is reduced by 2 (thus Israelis have a movement allowance of 4 and Arabs 2 if they enter such a hex and there are a lot of these hexes). For Arab forces, each hex in an enemy ZOC costs +1 MP to enter for each size value of an enemy that projects its ZOC into the hex into which the unit is moving. The same applies to Israelis except the maximum additional cost paid by the Israelis for any hex entered in an enemy ZOC is 3. There is no limit to this movement cost for Arab forces.

Friendly units negate enemy ZOCs for all game rules. A unit may not use its own ZOC to negate an enemy ZOC effect on that same, friendly unit.

3.4.3: All units must be in either Road Column mode, Cross-Country mode, or Deployed. Deployed units are indicated by having neither a Road Column nor Cross-Country marker on the unit.

3.4.4: An HQ or Unit may move one hex, and only one hex for its entire movement, if it does not have sufficient Movement Points to make the move. The HQ or Unit must be able to enter the hex normally. This one-hex exception is not allowed if the move would be from one enemy ZOC to another enemy ZOC or if the hex is prohibited for entry per the Terrain Effects Chart. Note: this rule allowing one hex of movement with insufficient Movement Points does not apply to Exploitation Movement (7.6.12).

3.5 Stacking

3.5.1: Players may stack an unlimited number of Fresh Units in each hex but only up to 6 size points of spent units in a hex. In addition, Israeli forces may also have all units of a Division stacked in a single hex even if spent – and can also add one independent unit (even if spent) to the stack as well. Stacking is enforced during the Check Stacking Segment of each friendly Activation sequence. If your Units are over-stacked when checked, you must remove Units (of the owning player's choice) and place the removed units in the Replacements Box until the stacking limit is met. This means that you can stack Spent Units to gain an advantage in combat from supporting Units, but you risk eliminating them if they remain stacked at the end of the Activation when stacking is checked.

3.5.2: HQs and markers are not Units and do not count against the stacking limit.

3.5.3: Units from opposing sides may never be in the same hex.

3.6 Lines of Communication (LOC)

3.6.1: A Line of Communication (LOC) represents communication links between each player's HQs and Units in the field, and the supply lines between them. HQs and Units in Test of Faith must have an LOC to perform many of the game's actions. This is usually a chain from one level to the next, and then to a final Supply Source (as marked on the map).

3.6.2: An HQ or Unit must have an LOC to a Supply Source for its side in order to perform many game actions, including:

  • refreshing HQs and Units (flipping the counter from its Spent to its Fresh side),
  • receiving Corps or Army level Support in combat, and
  • taking combat losses from your Replacements Track.

3.6.3: Supply Source hexes appear on the map in several hexes and are marked by which country may use each specific supply source. On the Sinai maps, any Arab country may use an Arab supply source on those maps – on the Golan map, only the specifically labeled country may use that Supply Source. Supply Source hexes are always considered to have a Corps HQ (for Israel) or an Army HQ (for Arab forces) – with a 16 command range in the hex to allow an LOC to be traced for any unit of that supply source country. Supply Sources cannot activate units.

[Figure 1: Lines of Communication Example. The Arab player traces communications for all forces first. The 5 ID HQ provides trace to all of the Syrian forces displayed except for the 47th Armored unit, which is more than 4 hexes away from the 5 ID HQ and is placed Out of Contact. To see if the 5 ID can provide communications, it must trace back along a road (as if it were a unit in Road Column) to the final Syrian Supply Source (since the Syrians do not have any Army HQs). The Syrian Supply Source is treated as an Army HQ with a range of 16 movement points. As long as the 5 ID is within this range, all its component units that can trace to it are also in Communications. The Israeli player can trace to most of his units from his various HQs. The 50P unit can trace to the 188A HQ (as it is within 4 hexes) or to the 820 Division HQ (as it is within 8 Movement points of that HQ). The same applies to the 53A battalion in hex 06.19. The 7A brigade HQ as well as the 82A Battalion in hex 10.20 cannot trace and an Out of Contact marker is placed on those units. If this is an Israeli Activation Phase and no Out of Contact markers have been placed, the 7A Brigade HQ could provide a Line of Communications to the 82A battalion and activate that unit (but only that unit – as it is stacked with the HQ) and move normally as an Israeli Activation, but, as they lack an LOC, no support can be provided.]

3.6.4: A Line of Communication (or LOC) is a path of hexes that is traced from the lower level unit to the higher level one. You must complete the entire chain to be in Communications. HQs and Units that are out of communications during the Communications Phase are marked with an "Out of Contact" marker and they remain Out of Contact until the next Communications Phase in which they are in contact again. There are other times when the LOC is checked, and this is always done at the moment it is called for – but if out of communications at that time does not receive an Out of Contact marker – it just will not be able to perform that action requiring the communications check. HQs have a range displayed on their counter.

3.6.5 The Communications Chain for Arab Forces (from lower level to higher level)

  • Units that are part of a division must be within communications range of their division HQ; and the Division HQ must have a Line of Communications; this trace from unit to Division HQ is by hexes, not movement points. Nothing blocks this trace; it is as the crow flies.
  • Division HQs have a Line of Communications if they are within communications range of their Army (if part of an Army). This trace is done using movement points (as if they were a unit moving in Road Column) from the Division HQ to its Army or supply source. Remember, a Supply Source is also considered a Corps/Army HQ for this purpose and has a command range 16 movement points. A Division HQ must always be on a road to provide communications. It may be off-road and if so, move as a Cross-Country unit, but if so, it cannot provide communications until back on a road.
  • Units without a Division/Corps/Army Stripe may trace to any Brigade/Division/Corps/Army HQ of that unit's side but still must trace normally.
  • An Army or Corps HQ must be able to trace to a supply source to be a final stop for any units or lower-level HQs.
  • Trace is always from the lower level to the next higher level.

Note that on the Golan map, there are no Army HQs. All Arab forces on that map must trace back to a final supply source to be in communications.

3.6.6: The Line of Communications chain for Israeli forces (also always traced from lower level to higher level)

  • Units that are part of a division must be within communications range of any Brigade or the Division HQ; and their Division HQ must have a Line of Communications; this trace from unit to Brigade or Division HQ is by hexes, not movement points. Nothing blocks this trace.
  • Division HQs have a Line of Communications if they are within communications range of their Corps (Northern HQ for the Golan; Southern HQ for the Sinai) HQ. This trace is done using movement points from the Division HQ to its Corps or supply source. Remember, a Supply Source is also considered a Corps HQ for this purpose.
  • Units without a Division stripe may trace to any Israeli Brigade/Division/Corps HQ.
  • During the activation phase (but not during the Communications phase), Israeli units stacked with a brigade HQ (and all Independent units stacked with it) are considered in communications. In addition, if the Brigade cannot trace a Line of Communications to its division, it can activate units of its command and any independent units it is stacked with in the hex. It must not have an Out of Contact marker on it to do this.
  • A Corps HQ must be able to trace to a supply source to be a final stop for any units or lower-level HQs.

3.6.7: If tracing using movement points, an LOC must be traced using a road.

3.6.8: An action which requires an LOC may be blocked by enemy Aircraft on Interdiction Missions (10.4.1).

3.6.9: All Division and Corps HQs must be on a road hex to provide LOC. To trace an LOC, always use a hypothetical unit in road column. Each hex used in a trace costs the road movement rate per hex of the trace. Enemy ZOCs cost an additional movement points (see 3.4.2) to enter unless negated. You cannot trace through enemy units or HQs.

3.7 Zones of Control

3.7.1: All Units with a Size greater than zero have a Zone of Control (ZOC), unless limited by condition markers. The ZOC consists of the six hexes immediately adjacent to a Unit, but only for hexes the Unit can legally enter (including with an Engineer Support roll). HQs (not being units) do not have ZOCs.

3.7.2: Friendly Units negate enemy ZOCs in the hex they occupy for all game rules (note that a unit cannot block an enemy ZOC for itself).

3.7.3: Enemy ZOCs add a number of movement points equal to their total size value projected on a hex (Israeli forces pay a maximum of 3 MPs for Arab ZOCs even if more size value is projected into the hex). Arab Units may not retreat into or through Israeli ZOCs. Israeli Units can but at a cost (see 7.6.10).

3.8 Infrastructure and Supply

[Counter art: Golan Infrastructure and Golan Supply markers.]

Infrastructure is the overall industrial ability of a side to support its combat forces. It includes the state of industry in the theater and the road network. Infrastructure can rise with improvements to readiness (as represented by reinforcement increases in the scenario), the spending of supply, and be decreased by airstrikes. Infrastructure provides Supply (tracked as Supply Points) to the armies.

Supply Points are used for many things in the game—from activating HQs and repairing damaged Airfields to removing markers. For any Unit or HQ to be able to expend Supply Points (rule 9.0), it must be able to trace an LOC (rule 3.6).

3.9 Control of Hexes

Hexes are always controlled by one player. Players begin the game by controlling the hexes on their side of the border. As forces move, control changes as the enemy enters a hex. Once the game is under way, a player controls a hex if he was the last player to enter the hex. His forces do not have to remain in the hex to retain control—the last player to have an HQ or Unit in the hex has control. A ZOC is not sufficient to claim control of a hex; an HQ or Unit must actually enter a hex to claim control.

3.10 Random Events

Battle never goes entirely as planned. During combat, there is a chance that a Random Event will occur, changing the conditions of battle. A Random Event happens when called for on a chosen Combat Chit. When a Random Event occurs, roll on the Random Event table to see the effect of the Event. Note that Random Events occur immediately when the Combat Chit is drawn, and all effects are determined at that time – these will influence the upcoming combat in that hex in some way.

3.11 Weather

The weather is always clear in this game. That is, there are no weather rules for this game.

3.12 Turn Structure

Test of Faith is played in a series of turns with each turn representing a 24-hour day. The following is the game's sequence of play. Perform all of the listed actions in the order presented. At the completion of all of the listed actions, check to see if victory has been achieved and if so, end the game and crown the victor. If not, perform the next turn using the same actions as listed again.

3.13 Sequence of Play

A) Strategic Phase

  1. Communications Phase (placing or removing Out of Contact markers as applicable) (4.1)
  2. Place Arriving Reinforcements (4.2)
  3. Air Allocation Phase (10.1)
  4. Air Mission Resolution Phase (10.3)
  5. Supply and Infrastructure Phase (9.0)

B) Activation Phase

Arab Player Turn:

A. Israeli Refresh Phase B. Arab Activation Phase

  1. Arab Player activates an HQ and units, and places Combat Chits
  2. Israeli Player performs Reaction Movement
  3. Arab Player performs Secondary Movement
  4. Arab Player resolves Combat
  5. Arab Player performs Exploitation movement (if there was advance after combat)
  6. If the selected HQ has completed all activations, all units that are not Deployed, are Spent and now Bivouac.

Israeli Player Turn:

A. Arab Refresh Phase B. Israeli Activation Phase

  1. The Israeli Player activates an HQ and units and places Combat Chits
  2. Israeli Player performs secondary movement
  3. Israeli Player resolves combat
  4. Israeli Player performs exploitation movement (if there was advance after combat)
  5. If the selected HQ has completed all activations, all units that are not Deployed, are Spent and now Bivouac.

(Note: there is no Arab Reaction Movement in the game)

End Phase

  1. Eliminate Friendly Units Phase (8.1). Both players may voluntarily eliminate friendly Units.
  2. Victory Check Phase (see 8.2).
  3. Politics Phase (see 17.0)
  4. Advance the Turn marker to the next day on the turn record track.

3.14 Victory

To win the game, one player must have 21 or more victory points and his opponent must have 0 during the Victory Check phase. Should this occur, the game ends and that player is the winner. Otherwise, the player with the greater number of victory points during the final victory check phase is declared the winner. Should the points be equal during this final Victory Point Check Phase, the Arab player is declared the winner.

The main source of Victory Points is Objective markers. These markers can either be hidden (face down) or revealed (face up). When instructed to reveal an Objective Marker, flip it face up.

If one player has 0 Victory Points and is instructed to deduct Victory Points from their total, the deducted amount is instead added to the enemy's total.

Example: it is turn 3 and the Syrian player has 12 victory points, and the Israeli player has 2. If the Israeli player is forced to lose 4 Victory Points, his total would reduce to 0 and 2 points would be added to the Syrian total giving the Syrian a total of 14 Victory Points.

4.0 The Strategic Phase

Most turns will begin with the Strategic Phase. The rules below explain the procedures and options players need to perform each Strategic Phase and are presented in the order you will encounter them during the sequence of play.

4.1 Check Communications

4.1.1 The Arab player and then the Israeli player checks all of his HQs and units to check their communications status. To do this, refer to the Communications rules (see 3.6). Any HQ or unit that is discovered to be out of communications has an "Out of Contact" marker placed on it. This marker will remain with the unit (and the effects of the marker) until the next Check Communications Phase in which it is no longer out of communications.

4.1.2 After Communications have been checked, spend supply as applicable (see 9.2) to refresh spent HQs.

4.2 Place Arriving Reinforcements

Place all incoming reinforcements as per the Scenario schedule. See 15.0 for more information regarding reinforcements.

4.3 Air Allocation Phase

[Diagram: Allocated to Golan box.]

4.3.1: First the Israeli player places his aircraft in either the Allocated to Sinai box or Allocated to Golan box. Then the Arab player places his aircraft on missions on each front they will perform for the day. Lastly, the Israeli player places his aircraft on missions after reviewing the Arab aircraft placement. Israeli aircraft may only fly missions on the front to which they were allocated.

4.3.2: Perform all combat in the Air-to-Air boxes and resolve missions. Arab Aircraft on Ground Support for each front add their values to either the Syrian or Egyptian Ground Support marker. The Israeli player may add both fronts Ground Support values to his Ground Support value but generally only planes allocated to each front may fly Ground Support on that respective front.

See rule 10.0 for more info on how this is done.

4.4 Supply and Infrastructure Phase

Both players, Arab player first then followed by the Israeli player, may spend supplies as they wish from the remaining Supply Points available (see 9.0). After that is done, place the Supply marker on the Infrastructure marker on the track. Each player may spend that number of Supply Points until this phase occurs again.

5.0 Arab Activation Phase

5.1 The Israeli player refreshes all his Spent Units (but only Units; not HQs) that have a Line of Communications.

5.2: During this phase, the Arab player activates Fresh HQs and Units, following the Activation Sequence (7.0) below for each activated HQ. It is possible to activate an HQ more than once if it is refreshed at the end of the sequence.

5.3: During each HQ's Activation, an Arab HQ may generally activate up to four Fresh Units. These four units must either be independent or belong to the Division activating the units. If an Army HQ is activating units, only units in that Army may be activated.

Independent units may always be activated without regard to a formation.

5.4: Activated Arab Units move and engage in combat during this phase. The Israeli player may perform Reaction Movement as well. Once all Unit movement and combat is completed, your active HQ may move and/or pay Supply Points to refresh itself. See 7.9 for additional information.

5.5: The Arab player may always choose to activate one, Fresh, "Out of Contact" unit from any formation as one of his activations (see 7.1). This unit may move normally but may not place a Combat Chit. He may also, as an activation, voluntarily display any HQs that he wishes. Fresh or spent HQs may be displaced but if fresh, it becomes spent.

6.0 Israeli Activation Phase

6.1: The Arab player refreshes all his spent units that have a Line of Communications.

6.2: During this phase, the Israeli Player activates Fresh HQs and Units, following the Activation Sequence (7.1) below for each activated HQ. It is possible to activate an HQ more than once if it is refreshed at the end of the sequence.

6.3: During each Israeli HQ's Activation, the HQ may generally activate up to six Fresh Units. No more than two of these units can be from a formation that doesn't belong to the activating HQ. See rule 14.4.1.4.1 for an exception to this. Independent units may always be activated without restriction to formation.

6.4: Activated Israeli units move and engage in combat during this phase. Once all Unit movement and combat is completed, your active HQ may move and/or pay Supply Points to refresh itself.

6.5: The Israeli player (only) may always choose to activate one, fresh, "Out of Contact" unit as one of his activations. This unit moves normally but cannot place a Combat Chit and place a Routed marker on the Unit at the end of its Activation. He may also, as an activation, voluntarily display any HQs that he wishes. Fresh or spent HQs may be displaced but if fresh, it becomes spent.

7.0 Activation Sequence

Test of Faith uses an innovative Activation system that combines movement, combat, and possibly Israeli reaction into one phase. It is important to understand the order, or Activation Sequence, in which different kinds of movement and combat occur. The Activation Sequence must be followed precisely for the game systems to function properly.

The Activation Sequence is divided into several segments:

  • HQ Activation Segment (7.1)
  • Unit Activation Segment (7.2)
  • Initial Movement and Combat Declaration Segment (7.3)
  • If it is an Arab Activation, Israeli Reaction Movement Segment (7.4)
  • Secondary Movement Segment (7.5)
  • Combat Segment (7.6)
  • Check Stacking Segment (7.8)
  • HQ Movement and Refresh Segment (7.9)

7.1 HQ Activation Segment

Select any Fresh HQ with an LOC and activate it by flipping the counter to its Spent side. If you have no Fresh HQs, your Activation Phase ends. Additionally, if you have no more fresh units to activate, your Activation Phase ends.

You must complete all activations with one HQ before you activate another HQ.

One (Israeli only) Fresh, Out of Contact Unit may be activated without an HQ. This unit cannot place a Combat Chit but otherwise is a complete activation. A unit so moved is spent and routed at the end of its activation.

An Israeli Brigade HQ may activate units within its command range if it has a line of communications (see 3.6). In addition, if an Israeli Brigade HQ cannot trace a Line of Communications during the Activation Phase, it may activate any Fresh units of its command (and any independent units) that it is stacked with in the hex (only).

7.2 Unit Activation Segment

Select up to, generally, 4 (Arab) or 6 (Israeli) Fresh Units within the HQ's Activation range and flip the counters to their Spent sides.

As an aside, there are three "states" a unit may be in. It can be Fresh, Spent, or Active. Fresh units haven't been active this turn, spent units have been active this turn, and Active units are those that are moving and performing combat during an Activation. Since there are two sides to a counter and three "states", players can either spend the unit the moment it becomes active and just remember they are active (as I have suggested here), or a player can move fresh units and remember they are active and spend them upon completion of their activation. Both ways work.

7.3 Initial Movement and Combat Declaration Segment

7.3.1: During this segment, you can move each of your active Units (but not HQs) generally up to 4 or 6 Movement Points. You decide in what order your Units move. One Unit must complete its movement before another Unit begins its movement. Only one unit need place a Combat Chit for combat to occur in that hex. Other units that move adjacent and participate in the combat do not need to spend additional movement to be "in the combat".

7.3.2: Units may only move if they are in "Cross Country" or "Road Column" modes. Only units in Road Column may use road movement (which is 1/2 movement point per hex along the road, 1 movement point per hex if moving along a railroad or a trail). If not moving along a road all hexes cost 1 movement point to enter. If a unit begins in or enters Restrictive terrain (see TEC), its movement is reduced by 2 movement points for this activation. This reduction only applies to the unit's initial movement (does not apply to Secondary Movement or Exploitation Movement). Place the appropriate marker to show the type of movement the unit is performing. There is no cost to enter either of these movement modes but once chosen, it cannot change throughout the unit's activation. Once the unit is done with its activation, it is considered deployed in the hex that it completes its activation and either the Road Column or Cross-Country marker is removed. Units with no marker (neither Cross-Country nor Road Column marker is present) are always considered "deployed". Units in different movement modes may stack together.

Units in Road Column may not benefit from Adjaceny Support from nearby Units.

Units that are "walking" (either having no equipment or not using Transport Support) pay 2 movement points per hex entered but are not effected by entering Restrictive Terrain.

Israeli Jeep units may enter terrain not normally allowed by equipped units and never pay the Restricted Terrain penalty.

7.3.3: When a moving Unit is adjacent to an enemy Unit, the moving Unit may declare combat. The hex in which the enemy is to be attacked is called "The Combat Hex". The Combat Hex must be a hex the Attacking Unit could enter normally. If there is more than one enemy Unit in the Combat Hex, the defender selects which Unit will serve as the Defending Unit. That unit will be used to determine the type of equipment available and from which Corps/Army Artillery Support will be available. The attacking unit must be in either Road Column or Cross-Country mode to declare a combat and place a Combat Chit (although any supporting units may be deployed). Combat Declaration must be paid for using movement points. (Note for clarity: you pay the cost of the Combat Declaration, not the cost of entering the target hex.) There are two types of combat each for Israelis and Arabs, and the cost of each type of Combat Declaration is listed below:

Combat Declaration Costs

Combat TypeCost
Israeli – Immediate Attack0 Movement Points
Israeli-Determined Attack1 Movement Point
Arab-Hasty Attack1 Movement Point
Arab-Prepared AttackAll Movement Points*

*Since an Arab Prepared Attack requires a Unit to spend all of its Movement Points, the Unit must begin the segment adjacent to its target.

7.3.4: When combat is declared, randomly draw a Combat Chit from the cup containing chits matching the type of combat and place the marker in the hex with the defending unit. This is the "Combat Hex". If there is a random event, determine the random event and now apply any results of that random event.

7.3.4 Important: If an Israeli Immediate Attack is declared, pause the Initial Movement and Combat Declaration Segment and resolve the Immediate Attack combat immediately. Once the Immediate Attack (including any Exploitation Movement) is resolved, continue the Initial Movement and Combat Declaration Segment (if you have additional active Units to move). The unit that conducted the Immediate Attack may perform exploitation movement as valued on the Combat Chit but may not normally move after placing the Immediate Attack Combat Chit. Units that Immediate Attack also cannot move in the secondary movement phase as well but may be supporting units in later attacks in that activation (although they cannot perform Exploitation Movement).

7.3.5 All Israeli HQs that are Division HQs move as if always in Road Column. Israeli Brigade HQs move as either Road Column or Cross-Country as the Israeli player wishes.

7.3.6 Active Units that are Active and participate in the combat (placed the combat chit or provided support) may switch to Cross Country mode if deployed to be able to advance after combat – and then move as allowed by advance after combat). Non-active units that provided support may not advance after combat and remain deployed.

7.3.7 If attacking across a bridged hex-side, only the unit placing the combat chit may participate in the combat and that unit must be in Road Column.

7.4 Reaction Movement Segment

7.4.1: During this segment, the Israeli player (only) may activate one (only) Fresh HQ and up to (usually) 6 Fresh Units for movement of up to, usually, 6 Movement Points. Reaction Movement must always be Cross-Country movement.

7.4.2: There are restrictions on which HQs and Units may be activated for Israeli Reaction Movement.

  • The HQ and Units must all have an LOC at the time of activation.
  • Neither the HQ nor the Units may be activated if they begin the segment adjacent to an enemy unit. Once activated, they may move through an enemy ZOC (and enter the Combat Hex if the Israeli player wishes) at the normal cost.

7.4.3: Israeli HQs and Units using Reaction Movement are Spent. Flip the counters to their Spent sides before moving. You must choose Cross Country to move in the Reaction Movement segment.

7.4.4: Reaction Movement limits forces as follows:

  • Units using Reaction Movement may not declare combat but may support a combat
  • Israeli HQs and Units may not move west of the hex row already occupied by the westernmost Israeli HQ or Unit on the Sinai map. Israeli HQs and Units may not move east of the hex row already occupied by the easternmost Israeli HQ or Unit on the Golan map

7.4.5: When the Reaction Movement of all activated Israeli forces is complete, the Israeli Player may spend Supply Points to refresh the active HQ. The cost is:

Israeli HQ Refresh Cost Table

HQ is in:Supply Cost
In territory originally controlled by the Israelis (i.e west of the Suez or east of the Purple Line)1
In any other territory2

7.5 Secondary Movement Segment

All of the phasing player's active Units that are not in an enemy ZOC AND did not participate in an Israeli Immediate Attack may move an extra 3 Movement Points if Israeli and 2 Movement Points if Arab. Minimum one-hex movement (see 3.4.4) is allowed in this segment. These Units may not enter an enemy ZOC at any time during this movement. Remember that another friendly Unit in a hex negates an enemy ZOC in that hex for all game purposes (including this).

If a unit entered Restrictive Terrain at any time during its activation, the secondary movement allowance for Israeli units is 2 and Arab units is 1.

7.6 Combat Segment

7.6.1: Combat in Test of Faith is a multi-step process and unusual because Units do not have attack or defense strengths. Combat is resolved by comparing die rolls, modified by several factors. Once combat has been declared, it must occur. You cannot cancel an attack you have previously declared. A target hex may be the Combat Hex in multiple combats per Activation Phase, but there can only be one Combat Chit at a time in any given hex.

7.6.2: The Combat Segment occurs in several steps for each Unit declaring combat. Complete the combat steps for each declaring Unit before beginning combat for the next Unit.

  1. Place the Combat Chit (see 7.3)
  2. The Israeli player (if during the Arab player turn) performs any Reaction Movement (see 7.4)
  3. The Phasing Player may perform Secondary Movement (see 7.5)
  4. Both sides (attacker first) declare their types of support (which equipment will be used, and if artillery, and/or ground support will be attempted)
  5. Examine the Combat Chit (see 7.6.3)
  6. Determine Combat DRMs (7.6.4)
    • Step 6-A: Size and Terrain Support
    • Step 6-B: Unit Equipment Support
    • Step 6-C: Artillery Support
    • Step 6-D: Air Support
  7. Resolve Random Events (if they occur, 7.6.5) and adjust support/size values as needed from Steps 6 and 7.
  8. Pre-combat losses (Dug In Arabs, Sagger strikes, and Israeli Hull Down tank advantage)
  9. Roll Combat Die Rolls, place Elite, Poor markers if applicable (7.6.6)
  10. Determine Winner and Combat Spread (7.6.9)
  11. Honor Losses (7.6.10)
  12. Advance after Combat ()

After completing all the steps of Combat, proceed to Check Stacking (7.8), movement/refresh of HQs (7.9), Bivouac (7.10), Israeli Tank Recovery, and all active units are now spent (7.13).

7.6.3 Examine the Combat Chit: The Combat Chit in the Combat Hex contains essential information for combat resolution. It is read as follows:

[Diagram: Combat Chit key. Combat Chits show "Which Die to Use" (d6 or d10), a DRM to apply (e.g. (+2) for Immediate, (+1) for Determined, (-3) for Hasty, (-2) for Prepared), a Random Event "RE" flag (Yes/No), the Combat Type (Immediate, Determined, Hasty, Prepared), a Support Level "Spt" (letter A, B, C, D and number), and Exploitation MPs "Adv" (number).]

  • The upper left corner tells you the type of die to roll for the attacker—D6 or D10—and, in parentheses, any Die Roll Modifier (DRM) given to the attacker. Example: (+1) D6 means roll a six-sided die and add 1 to the attacker's roll. The defender uses a D10 if the selected defending unit is fresh (and they become spent) or a D6 (if spent or if they are fresh and wish to stay that way).
  • The upper right corner (RE) tells you if there is a Random Event or not.
  • The lower left corner (Spt) tells you how much artillery, ground support (from aircraft), or attack helicopter support the attacker will have from the upcoming combat. A is the worst support level; while D is the best level. The defender's values are based on the type of combat declared.
  • The lower right corner (Adv) tells you how many Movement Points the attacker gets for Exploitation Movement following any Advance after Combat. This value can be modified by terrain or equipment (see 7.6.12).

7.6.4 Determine Combat DRMs

Generally, in a combat, both sides will roll a die to determine the winner of the combat. Added to the combat roll are die roll modifiers that will determine the final result. These are totaled and tracked using the Israeli and Arab DRMs marker (this is generally for terrain and size), and the Israeli and Arab Support Marker (for equipment and support benefits) on the Combat Die Roll Modifier track on the General Game Display. There are two types of Combat DRMs, for size and terrain (use the DRM marker for this), and those that are affected by types of equipment and support (use the Support marker for this).

Add both of these markers together to get a final modifier to your die roll.

Note: these markers are separate to make changes to the values from random events or other game functions as the sequence progresses easier to adjust in play.

7.6.4.1: Size Support and Terrain DRMs

A. Size DRMs: Any friendly Units—Fresh or Spent—adjacent to the Combat Hex may (at the owning player's choice) add to the size of the Attacking or Defending Unit. Each player determines which of his adjacent Units will be adding their value to a combat. A unit does not need to have a Line of Communication to add to the size of the combat. Any units used this way are considered "in the combat".

  • The unit that was used to declare combat and all units stacked in the same hex as that unit must add their size if allowed. All units that are defending in the combat hex also must provide their size to the combat. Any additional units adjacent to the combat hex may provide their size to the combat at the owning player's choice.

Exception: Arab (only) Units in Road Column may never add adjacent units into the Combat. Only units stacked in the hex that contains a unit that placed the Combat Chit may add their size to the combat.

  • Adjacent Fresh Units providing their size in any type of combat remain Fresh.
  • After determining the size of both the attacking force and the defending force, form a ratio of the attacker's size by the defender's size and round down to the nearest whole integer. Add the following value to the DRMs marker on the Combat Modifier track. Note that the size value can be modified by which player placed the Combat Chit (is attacking).

Size Ratio DRM Table

RatioArab ModifierIsraeli Modifier
1-3 or less-3-1
1-2-20
1-1-1+1
3-20+2
2-1+1+3
3-1+2+4
4-1 or more*+3+5

*(or the defender has 0 total size)

  • If it is an Israeli Night attack, double the size value of all Israeli attackers "in the combat" (see 7.11).
  • Status markers on Units which are adjacent but not supporting (because you held them out of the combat) do not affect the combat. For example, one adjacent unit has a "Poor" marker, and another adjacent has "Elite" marker on it, the owner may choose to only include the "Elite" marker to apply to the combat. Markers in the Combat Hex and on the attacking Unit (the one that placed the Combat Chit) always apply to the combat. All supporting Units, along with the Attacking and Defending Units, are eligible to receive any markers drawn from the Cup of SNAFU (see 13.1) during the combat—the choice of which side of the marker and upon which Unit the marker is placed belongs to the player who drew the marker (this is not always the owning player).

Equipment Type Reference (the counter's equipment type determines the Unit Equipment support; the icon for each is shown on the printed table):

CategoryEquipment
Israeli TanksMagach 3; Magach 6; Sho't Kal; Sho't Metr (Meteor); M51; Tiran; PT-76 (Amph)
Israeli APC / IFVM3 (half-track); M113; RCL (also Recon)
Israeli ReconnaissanceJeep; RCL (also APC)
Arab TanksT-62; T-55; T-54; T-34; Centuiron; Vickers; PT-76 (Amph)*
Arab APC / IFVBMP; OT-62 (Amph); OT-64; BTR-152; BTR-60; BTR-50; BTR-40; M113; Saracen
Arab ReconnaissanceAML-90; M3 VTT (Amph); BRDM

*PT-76 equipped units do not provide equipment support but see 14.2. (Amph) Amphibious equipped units are covered in 14.2.

B. Terrain Modifier: For the defender to receive a terrain modifier, it must be deployed in that type of terrain. The Terrain Effects Chart has the terrain modifier for each type of terrain in which a unit is deployed. "Dug In" markers are used as extra losses that may be applied in combat without affecting the defending player (see 7.6.4.4).

Add these two values together and mark the total using the Israeli/Arab DRM value on the Combat Modifiers Chart on General Display Chart.

7.6.4.2 Sagger ATGMs

After the Israeli player has chosen his primary type of equipment and if that type is a tank, but before the attack is rolled and if any Egyptian unit (fresh or spent) in the combat (in the combat hex or supporting the combat) has an infantry or commando symbol on the counter, the Arab player must roll a D10.

All Arab units in the combat that can fire, must fire their Saggers and roll for effectiveness. Fire is sequential, and the Arab player may stop rolling if there are no Israeli tanks remaining in the battle.

If any Arab unit (non Egyptian units apply here) has a Sagger symbol on the unit, the Arab player subtracts 1 from his die roll. Should he roll equal to or less than the current Sagger Losses value (on the Arab Player display), one tank equipment loss is immediately given to an Israeli unit with tanks in the battle. Should he roll a value equal to half the Sagger Losses value (rounding down), 2 tank equipment losses are immediately given to any Israeli units with tanks in the battle. Should the Arab player roll a value greater than the current Sagger Losses value, reduce that value by one.

The Sagger Losses value can never be more than 7 or less than 2.

Israeli tank losses must come from the type of tank used in the battle (if more than one is present) first. If no more are present of that type after the first loss, the Arab player may choose which other Israeli unit has its tank equipment reduced.

If Israeli tanks are lost, these losses will reduce the Tank Equipment Support value for the upcoming combat.

7.6.4.3 Hull Down Israeli Tanks

If the Israeli player is defending in a combat and declared tanks as his primary equipment, all Fresh Israeli units with tanks that are in the combat and in terrain that allows for Hull Down (as marked on the TEC), may have a Hull Down marker placed on it. Before resolving combat, each Israeli unit so marked will give one or two equipment losses to all Arab tanks in units that are in the combat (regardless of whether or not the Arab player chose tanks as his equipment). This is applied to each Arab unit with tanks in the combat (both attacking and supporting). The Israeli player may choose which Arab units suffer the equipment loss. This is performed prior to rolling for the combat result and any tank support that is due to the Arab player from the attacking unit is recalculated (if that is one of the units that the Israeli chose to lose tanks).

Israeli tanks in Tank Ramp hexes are automatically considered Hull Down and do not place Low/No Ammo markers when destroying Arab equipment. No Hull Down marker is placed. The Israeli player will always choose two Arab losses when firing from these hexes.

Exception: M-51 tanks don't get this advantage and may not be Hull Down and cannot use Tank Ramps.

7.6.4.4 Dug In Arabs

If the Arab player should successfully defend any combat hex against an Israeli attack, he may place a Dug In marker on one of the Arab units that defended the hex. Should the Israelis attack a unit that has a Dug In marker, the Israeli player loses one Size value from any supporting units before the combat is rolled – and the size value for the Israeli player is adjusted prior to the combat.

7.6.4.5: Unit Equipment

All units in the game will have either both Primary and Secondary Equipment, just Primary Equipment, just Secondary Equipment, or no equipment.

[Diagram: Equipment key — Both (e.g. 11/7 ID with BTR50 and T55); Primary-only (e.g. 52A with Magach 3); Secondary-only (e.g. 4/2 ID with T34); None (e.g. 133 infantry).]

Equipment may allow you to add an additional modifier to your combat die roll. If you have both primary and secondary equipment in the attacking unit, the owning player may choose which equipment to use. Equipment may be chosen from the unit that placed the combat chit (the attacking unit). A player may choose to not use equipment at all if they wish. The attacker always announces which if any equipment he will use in a combat. The defender may then choose his equipment to use in the upcoming combat after learning what the attacker will be using. There are three types of equipment, Tanks, APCs/IFVs, and Reconnaissance. Tanks and APCs/IFVs can be chosen as the equipment in the battle – reconnaissance equipment is always chosen if present and is covered in 14.1.

Tank and APC/IFV equipment has a value marked on their Israeli (for Israeli equipment) or their Arab (if Arab equipment) Player Aid. This is called Equipment Support. Note that this value on the chart never changes. Losses are tracked by individual units that may not be able to use all of the value as noted on the Terrain Effects Chart.

Note that M-51 Tanks and T-34 equipped units may only use their equipment against each other or against units without tank equipment.

The type of terrain in which the Combat Chit is in determines the type of terrain for equipment support.

Designer's comment: The game allows for very easy changes in the values here. If you disagree with my values, just change the value on the chart to what you think works better for you.

To use your equipment, roll a D10 and compare the roll to the equipment support. If the roll is equal to or less than the equipment support value, the modifier for the terrain type of the combat hex (as shown on the Terrain Effects Chart) for that type of equipment is placed on the Combat Modifier chart on the display. This is called the Support Modifier. You roll the Equipment Support value or less to then receive the modifier for equipment base on that type of terrain.

If you are using secondary equipment, use the secondary equipment modifier on the Terrain Effects Chart using the same procedure but the applicable column on the Terrain Effects Chart.

Note you can only use primary or secondary equipment – never both in the same combat.

7.6.4.6 Artillery Support

Artillery is tracked by Division. Just like units, the value on the support track is always the same (per side), but the providing HQ may suffer losses and is marked with a -1/-2/Half/No-Artillery marker on the HQ to offset the track value. This is different from equipment in that the loss marker is deducted from the roll needed to add artillery support. Only units of that division, or independent units that are within range of the Division HQ may use that Division artillery – and a unit of that Division must be present "in the combat" to allow use of that Division artillery. Only one Division may provide artillery support in a combat.

To receive Artillery Support, a unit must have an LOC that ultimately ends at a Supply Source.

Arab Red Sea and Port Said forces may not receive Artillery Support.

The Support level on the Combat Chit determines the effect of the Division artillery. Each player that declared artillery support rolls a D10 and compares it to the (possibly modified from losses) Division Artillery value, and if a player rolls equal to or less than the value, the following is applied at the appropriate Support Level. If both players declared Artillery Support and one passed the roll and the other did not, the player that failed the roll takes one Artillery loss from the division that provided the artillery (representing counter-battery fire).

This is done prior to rolling dice to determine the final combat. Losses are applied immediately and can alter the support value.

Support Levels for the attacker and result if the attacker is successful in his artillery roll:

  • A – Add three to the Attacker's support value.
  • B – Add four to the attacker's support value.
  • C – Add four to the attacker's support value. The defender in the hex, should he lose the combat, must pay a Size step as his first loss in the combat.
  • D – Add four to the attacker's support value. The defender in the hex, should he lose, must pay a Size step as his first loss in the combat and then may only use retreats as losses (up to 3) for the remainder of losses (thus he may not use replacements or victory points to honor the spread).

The Terrain in the Combat Chit hex may modify this value as well. Add the final total to the attacker's Support marker (added in addition to the player's equipment modifier determined in rule 7.6.4.5).

Type of combat for the defender and the result if the defender is successful in his artillery roll:

  • Immediate Attack (Israeli attack) – Add 3 to Defender's Support value and reduce the exploitation value on the combat chit by 1 (less than 0 stays 0).
  • Determined Attack (Israeli attack) – Add 4 to Defender's Support value, reduce the exploitation value on the combat chit by 2 (less than 0 stays 0), and one Size loss is suffered by one attacking or supporting unit in the combat (and the odds modifier for the attack is recomputed).
  • Hasty Attack (Arab attack) – Add 4 to Defender's Support value, reduce the exploitation value on the combat chit by 2 (less than 0 stays 0), one Size loss is suffered by one attacking or supporting unit in the combat.
  • Prepared Attack (Arab attack) – Add 5 to Defender's Support value, reduce the exploitation value on the combat chit by 2 (less than 0 stays 0), and one Size loss is suffered by all attacking and supporting units in the combat.

7.6.4.7 (Air-to-) Ground Support

A player that declared ground support for the upcoming combat must roll against their ground support value (as shown on the Player aid). At least one unit of one country involved in the combat must be present in the Ground Support box on the Air Display to allow ground support by air units of that country. Only one country may perform ground support in any one combat. If they roll equal to or less than the Ground Support value on the Player Aid, perform ground support for the combat. Take one or two aircraft out of the Ground Support box, perform any applicable SAM combat, and if the aircraft survives the SAM fire, add the total air-to-ground value of the one or two aircraft to the support value marker for the upcoming combat. The Ground Support value on the Player Aid does not reduce as planes are used in a combat. See rule 10.2.6 for additional information.

  • Support Level A or B: one plane may be added
  • Support Level C or D: two planes may be added

The defender, if he rolls equal to or less than his Ground Support value on the Player Aid, may add one plane if an Immediate or Hasty attack, and up to two if any other type of attack. He follows the same procedure as the attacker in adding plane support values to the combat.

7.6.5 Random Events

If the drawn Combat Chit has a random event, use the Random Event table appropriate to the type of Combat chit and either player rolls a D10 on the table. Apply results immediately after determining the random event. Any impact from the event will apply to the upcoming combat.

If rolled, a revealed Objective is drawn from the attacker's pool of Objective markers, but the winner of the combat will immediately gain the value of those Victory Points at the end of the combat. After the Victory Point(s) have been awarded, the marker is placed back in the attacker's pool to be drawn again.

Random Event Tables:

Israeli Immediate Attack Chit

RollResult
1Reporters are present – add a revealed Objective in the Combat hex
2Defender draws from the Cup of Snafu (attacker chooses marker type; must be placed)
3-6Attacker draws from the Cup of Snafu (defender chooses marker type; must be placed)
7-10An Atrocity has been committed. Roll a die; if even, the Israelis have committed it, if odd, the Arab has committed it. The player that didn't commit the atrocity may add one to his politics roll this turn. This is cumulative.

Arab Hasty Attack Chit

RollResult
1-2Reporters are present – add a revealed Objective in the Combat hex
3-4Defender draws from the Cup of Snafu (attacker chooses marker type; must be placed)
5-6Attacker draws from the Cup of Snafu (defender chooses marker type; must be placed)
7-10An Atrocity has been committed. Roll a die; if even, the Israelis have committed it, if odd, the Arab has committed it. The player that didn't commit the atrocity may add one to his politics roll this turn. This is cumulative.

Israeli Determined Attack Chit

RollResult
1-4Reporters are present – add a revealed Objective in the Combat hex
5Defender draws from the Cup of Snafu (attacker chooses marker type; must be placed)
6Attacker draws from the Cup of Snafu (defender chooses marker type; must be placed)
7-10An Atrocity has been committed. Roll a die; if even, the Israelis have committed it, if odd, the Arab has committed it. The player that didn't commit the atrocity may add one to his politics roll this turn. This is cumulative.

Arab Prepared Attack Chit

RollResult
1-2Reporters are present – add a revealed Objective in the Combat hex
3Defender draws from the Cup of Snafu (attacker chooses marker type; must be placed)
4Attacker draws from the Cup of Snafu (defender chooses marker type; must be placed)
5-10An Atrocity has been committed. Roll a die; if even, the Israelis have committed it, if odd, the Arab has committed it. The player that didn't commit the atrocity may add one to his politics roll this turn. This is cumulative.

7.6.6 Combat Die Rolls

The attacker rolls a D6 or D10, as indicated on the Combat Chit. The defender rolls a D10 if the Defending Unit is Fresh or a D6 if it is Spent. If the Defending Unit is Fresh and chooses to roll a D10, it becomes spent.

Note: Leaders gained through random events may allow players to re-roll their combat dice for this combat.

7.6.7 Apply Modifiers

Add your total DRM to your die roll to get your modified die result.

7.6.8 Check for Unit Quality

Some units begin the game with a troop status. These units are treated exactly as if they had the same type of marker on them. If you roll a natural 1, place a Poor Unit marker on one of your Units in the combat. If you roll a natural 10 (on a D10) or natural 6 (on a D6), place an Elite Unit marker on one of your Units in the combat. You can place a Poor Unit marker or an Elite Unit marker on any Unit participating in the combat as Attacking Unit, Defending Unit, or supporting Unit, but no Unit may receive a second (and replacing) quality marker, unless all participating Units on your side already have one (or are so marked on their counter). If all Units from your side in the combat already have quality markers (or are so notated on their counter), you must replace an existing quality marker with the one just drawn. Sometimes weak Units surprise you; sometimes stalwarts fail.

7.6.9 Determine Winner and Combat Spread

The player with the highest modified die result wins the combat. In case of a tie, the defender wins, and the attacker is given 1 loss it must honor.

7.6.9.1: Units participating in the combat are the Attacking Unit (which declared the combat), the Defending Unit, and supporting Units of both sides.

7.6.9.2: The Combat Spread determines how many losses the losing Units must take. The Combat Spread is the difference between the two modified die results. In case of a tie, the Combat Spread is considered to be 1 against the attacker.

7.6.9.3: The side with the higher total equipment die modifier value, and which loses the combat (only – meaning they lost the die roll comparison), may choose to "Press their Attack". To do this, apply the used equipment losses to the attacker. For each equipment step lost, 2 may be added to his already rolled value up to a maximum of the difference of the two equipment values. You can't lose more equipment than you have.

For example, the attacker has a 6 equipment modifier for the combat and the defender has 3. The attacker may choose to add 2 to his roll if he takes one equipment step loss or 3 to his roll if he takes 2 equipment losses.

7.6.9.4: The Combat Spread has a Maximum. Normally, the Maximum Combat Spread is 5.

The Maximum Combat Spread is adjusted if Units of high or low quality participate in the combat. The adjustments are cumulative, yielding a range of 3-7 for the Maximum Combat Spread. Use the following rules to adjust the Maximum Combat Spread:

  • If any participating Unit (or Units) on the winning side has a Poor marker on it, subtract 1 from the Maximum Combat Spread.
  • If any participating Unit (or Units) on the winning side has an Elite marker on it, add 1 to the Maximum Combat Spread.
  • If any participating Unit (or Units) on the losing side has a Poor marker on it, add 1 to the maximum Combat Spread.
  • If any participating Unit (or Units) on the losing side has an Elite marker on it, subtract 1 from the maximum Combat Spread.

Example: In a combat, the modified die rolls differ by 8. The Israeli Player wins and has an Elite Unit in the combat, which increases the Maximum Combat Spread from 5 to 6. The Arab Player takes 6 losses.

Note: you don't change the spread determined by comparing die rolls – you only change the maximum spread to apply to the combat. If the rolled spread is 1 and elite units are present on one side, it would still be a spread of 1.

7.6.9.5: Changes to the Maximum Combat Spread due to troop quality are enforced even if the marker was just placed in a random event from this combat.

Note: you don't change the spread determined by comparing die rolls – you only change the maximum spread to apply to the combat. If the rolled spread is 1 and elite units are present on one side, it would still be a spread of 1.

7.6.10 Take Losses

Units from the losing side must take losses using the following rules.

If the losing side cannot take the required losses, all losing Units are eliminated (sent to the Replacements Box). Fortunately, there are several ways to take losses. The losing side may usually take its losses using any combination of these methods. However, see Artillery support (7.6.4.6) and the Commander rules (14.4) for possible impact on the availability of choices.

  • A. Retreat a Unit or Units 1-3 hexes: retreating one Unit satisfies a loss for each hex retreated. Multiple units (all must be part of the combat to be eligible) may retreat to satisfy this, and each unit retreated one hex counts as one towards the number retreated. A Fresh Unit which retreats becomes Spent. Egyptian Units must retreat west, while Syrian Units must retreat East. Israeli units on the Sinai map must retreat east while Israeli units on the Golan map must retreat west. Each hex retreated into must be further away from the Combat Hex and if it retreats though an enemy ZOC, losses may be applied as it retreats (see below). No one unit may retreat more than 3 hexes.

    Immobile units cannot retreat and must honor combat spreads using only victory points or replacements.

  • B. Pay a Replacement Point: you can pay 1 Replacement Point from your Replacements, Infrastructure, and Supply Track to satisfy 1, and only 1, loss if this is a Immediate Attack or a Hasty Attack. You may pay up to 2 if this is a Determined Attack or a Prepared Attack. You may not use more Replacements Points to satisfy losses. You must have an LOC, at the moment of combat, for at least one unit in the combat (for the attacker) or from the combat hex (for the defender) to satisfy losses with a Replacement Point(s). 0 Size units may not receive Replacements in combat.

  • C. Spend Size: you may spend one Size value for each loss.

  • D. Spend Arab Dug In markers: A Dug In marker in the combat hex can be removed for up to two losses.

  • E. Spend one Victory Point: one Victory Point may be used for one loss.

  • F. Eliminate all Units participating in the combat. The Arab player may choose to eliminate all (only) of his units in the combat to honor all loses (regardless of the total spread). The Israeli player may eliminate units, but each unit eliminated counts as one towards honoring the spread. He too can also eliminate all Israeli units in the combat to honor all loses (regardless of the total spread). If you only have one Unit in a combat, eliminating that Unit still satisfies all losses. If all the eliminated Unit(s) have no LoC, lose an additional 2 Artillery steps if Artillery Support was provided; the eliminated Unit(s) is placed in the Destroyed Units box (not in the Replacements box).

7.6.10 Retreats and ZOC (table):

If any Unit:Then:
Retreats two hexesplace a Disrupted marker on it at the completion of the retreat and opponent draws from the Cup of SNAFU for the retreating Unit, after the retreat is completed. If the retreating player used artillery support, the Division/Army that provided support takes one artillery loss as well. Enemy units have overrun the friendly unit's artillery park in the retreat.
Retreats three hexesplace a Routed marker on it at the completion of the retreat and opponent draws twice from the Cup of SNAFU for the retreating Unit, after the retreat is completed. If the retreating player used artillery support, the Division/Army that provided support takes two artillery losses as well. Enemy units have overrun the friendly unit's artillery park in the rout.
For the first enemy ZOC retreated into:Reduce the Primary Equipment Level by 1 (if Disrupted) or 2 (if Routed). Reduce Secondary equipment by 1 (if Routed).
For the second and each additional enemy ZOC retreated into: (For Israeli units only – Arab units cannot retreat through Israeli ZOCs)Reduce Primary Equipment by 2 (if Disrupted) and 3 (if Routed). Reduce Secondary Equipment by 1 (if disrupted) and 2 (if routed)
Is 1) Disrupted or Routed and 2) enters or passes through an enemy ZOC after a combat when enemy Artillery Support was usedReduce the size value by 1 for each unit that retreats into a hex with an enemy ZOC

Note: Your opponent draws the SNAFU marker when needed and if he cannot apply the marker to your retreating unit, ignore the marker and return it to the Cup of SNAFU. Units that have Routed or Disrupted markers placed on them are considered Routed or Disrupted for the retreat that made them so.

If the winning player has Reconnaissance Assets "in the battle", add 2 to the exploitation value on the Combat Chit (see 7.6.12).

7.6.11 Advance after Combat: If the attacker won the combat, and the defender has vacated the Combat Hex, the attacker may Advance after Combat.

7.6.11.1: The attacker may move active Units that participated in the combat (both the declaring Unit and any active supporting Units) into the Combat Hex, ignoring stacking for a moment. This costs no movement.

7.6.11.2: Non-active Units may not Advance after Combat, even if they provided Combat Support.

7.6.11.3: Defending Units may never move after combat, except to retreat.

7.6.12 Exploitation Movement: All Units that advanced into the Combat Hex after combat may now conduct Exploitation Movement. The number of Movement Points available for an exploitation move is the "Adv" number on the Combat Chit. All normal movement rules apply. Once all Exploitation Movement is complete, stacking rules are again enforced.

7.6.13: Clean Up: Return the Combat Chit to its cup. It can be drawn again in the next declared combat.

7.7 After Combat Loss Segment

If the following situation occurred in the previous combat, apply as follows:

  • If both sides used Tanks as their equipment support (successfully or not), the side with the lower Tank Support value takes one Tank Equipment loss. If the values are even, the Arab side takes one equipment loss. Use the unmodified value for the Tank on the support track and disregard any markers on the unit.

Example: A T-55 attacks an Magach 6 and both use tank support for the battle. The Magach is the unit's secondary equipment and has a "Half Secondary" marker on it for the battle. The T-55 would still take a loss after the combat for an Arab tank equipment of the lesser value on the Support track as the Israeli tank.

  • If one side used APCs/IFVs as their equipment support and the other side used tanks as theirs, the side that used APCs/IFVs takes one APC/IFV loss.

These are all cumulative if applicable.

7.8 Check Stacking Segment

Check to see if any Units are over-stacked and send over-stacked Units to the Replacements Box.

7.9 HQ Movement and Refresh Segment

The activated HQ may now move up to 10 Movement Points. Both players may then pay Supply Points to refresh the HQ. If you do this, you can activate the HQ again immediately or save its next Activation for later. To be clear, HQs can activate more than once per Activation Phase as long as they are refreshed at the end of their Activations. A refreshed HQ again has its full capacity to activate Units and move up to 10 Movement Points during a subsequent Activation. The cost to refresh an active HQ is listed in 7.4.5.

7.10 Bivouac

At the completion of the activation and after the HQ is refreshed or not, remove all Road Column and Cross-Country markers from all just-active units. These units are now deployed until they are active again. They have gone to bed for the night.

7.11 Night Battle

Only the Israeli player may start a Night Battle and only under certain circumstances. If the Israeli player loses a Determined battle, he may choose to continue the battle into Night. To do this, he must take all losses as Size losses from the defeat (and stays adjacent to the enemy). If he does so, he may immediately declare a Night battle and place a new Determined battle marker in the Combat hex in which he just lost and attack again. Resolve the attack normally once again but the Israeli Size value is doubled for this attack. If either player chooses Victory Points to honor losses, the point spend is worth 2 Victory Points to the awarded player.

7.12 Israeli Tank Recovery

If the Israeli player has lost any Tank Equipment this Activation, roll a D6 for each one step lost. If you rolled a 1-4, add one replacement point to the Israeli Replacement track. Use a -1 Primary Tank marker on the Israeli Player Aid Replacement, Infrastructure, and Supply Track to mark this value as the Activation is in progress. After rolling for each loss, move the loss marker back to the 0 space. Recovered Israeli tanks do not reverse Victory Points awarded to the Arab side for their original loss.

7.13 Unit Status

All Active units are now Spent.

8.0 End Phase

8.1 Eliminate Friendly Units Phase

First the Arab Player, then the Israeli Player, may move friendly Units from the map to the Replacements Box. This is an opportunity to reclaim Units which can no longer be activated due to distance or being surrounded by enemy ZOCs. Victory Points are tracked by using the Syrian, Egyptian, and Israeli Victory Point marker on the Combat DRMs/Support and Victory Point Track on the General Game Display.

8.2 Victory Check Phase

Each scenario will list Victory Point awards to be awarded to the players during play. In addition to accomplishing these tasks, both players can also gain victory points by claiming Objective Markers. Egyptian, Syrian, and Israeli players mark their values separately.

8.2.1 Objective Markers

During the Victory Check Phase, players can place, remove, or claim friendly Objective markers. A player claiming an Objective marker gains the VPs shown on the marker. During this phase, there may already be Objective markers on the map from previous turns or from Random Events.

8.2.2 Victory Point Awards

If one nation (either Syria, Egypt, or Israel) has 21 points and gains victory points, those points are deducted from the enemy total. If it is the Israeli player, he may choose which Arab total is reduced. If a player has fewer victory points and what they might lose in victory points through play, the remaining victory points that cannot be lost are instead added to their opponent's total (the Arab player may choose if the Israeli player cannot honor the loss).

8.2.3 Maximum Victory Point Totals

It is impossible to accumulate more than 21 VPs. If a player has 21 Victory Points and gains more points, those points are deducted from the enemy's total.

8.2.4: Objective Marker Segment

First the Arab Player, then the Israeli Player, must perform one of the following actions. If a player cannot perform any of these actions, he loses 1 VP—even if the reason is that there are no markers left to draw.

  • Claim all revealed friendly Objective markers (on the map) that have a friendly unit on the objective hex or are in a hex that was last entered by a friendly unit. Collect the VPs as marked on the marker and place the marker back in the pool to be drawn again.
  • Draw a random friendly Objective marker and place it face-down on any hex that has an enemy unit in it.
  • Reveal all friendly Objective markers that are adjacent to at least one friendly Unit.
  • After this has been done, add 1 Political Point for any nation's Victory Point total of 5-9, add 2 Political Points for any nation's Victory Point total of 10-14, and 3 Political Points for any nation's Victory Point total of 15 or more.

8.2.5 Politics Phase

Check to see if either player wishes to roll against the Politics track. If both decline, this phase is over. If either wish to roll, see 17.0.

8.2.6 Victory in the Campaign Game

8.2.6.1 Automatic Victory

The game or a front in play can end immediately under the following conditions:

  1. If at any time, the following happens: The Israeli Player has 21 Victory Points and either the Syrian or Egyptian player has 0 Victory Points. The side with 0 points leaves the war. Remove all Arab forces and all Israeli HQs and Units from the resolved front from the game. If the Israel has 21 Victory Points and the remaining Arab Player has 0, the game ends in an Israeli Victory.

If either Arab player has 21 Victory Points and Israel has 0, the game ends in an Arab victory.

  1. Should the Arab player control all Israeli Supply Sources on the Golan map, the game ends in an Arab Victory.
8.2.6.2 Political Victory

When the first ceasefire occurs as a Political Event, the war ends on the Golan map. When the second ceasefire occurs as a Political Event, the game ends. If Israel has more Victory Points than both Arab countries, the game ends in an Israeli Victory. If either of the Arab markers are greater than the Israeli one, the Arab player wins the game.

8.3 Politics Phase

See 17.0 for how to conduct the Politics Phase.

8.4 Time Phase

Advance the turn marker.

9.0 Infrastructure and Supply Phase

Both players have an Infrastructure marker and a Supply marker. The infrastructure marker is used to show the state of that side's capability to supply his forces (the state of the road network and ability to send supplies to their armies). The Supply marker is used to show what supplies are available to spend. Supplies and Infrastructure are tracked on each player's player aid.

Note: The Israeli infrastructure value is lower at the start of play to represent the complexities and surprise nature of the outbreak of the war. It takes time to put the country on war footing. Increases on the reinforcement track represent this conversion.

9.1 Supply Points

First the Israeli Player, then the Arab Player, may spend Supply Points they have remaining to perform several actions as listed below. Supplies can be spent during the Supply and Infrastructure phase or as noted below, during other phases.

9.1.1: The Infrastructure value has a maximum value of 15. The minimum value for Infrastructure for is 2. It may never be reduced to less than this value nor to more than the maximum value for each side. Points may only be spent when allowed as shown on table 9.2 above.

9.2 Supply Costs

See the 9.2 Supply Point Expenditure Table below.

9.2 Supply Point Expenditure Table

CostAction
1(2)The Arab Player flips a Spent HQ with an LOC that is currently west of the Suez Canal or east of the Purple Line to its Fresh side. This can occur both during the activation phase and in the Supply and Infrastructure phase. The Arab player may only spend Supply Points during the Activation Phase on HQs that did not move when they activated. 2 is paid if either Assad (for HQs on the Golan front) or Sadat (for HQs on the Sinai front) is in command.
2(3)The Arab Player flips a Spent HQ with an LOC that is currently east of the Suez Canal or west of the Purple Line to its Fresh side. This can occur both during the activation phase and in the Supply and Infrastructure phase. The Arab player may only spend Supply Points during the Activation Phase on HQs that did not move when they activated. 3 is paid if either Assad (for HQs on the Golan front) or Sadat (for HQs on the Sinai front) is in command.
1(2)The Israeli Player flips a Spent HQ with a LOC that is east of the Suez or west of the Purple Line to its Fresh side. This can occur both during the activation phase and in the Supply and Infrastructure phase. If it occurs during the Activation Phase, the HQ must not have moved when it was activated. 2 is paid of Gonen is in command and the Israeli HQ is on the Sinai Front.
2The Israeli Player flips a Spent HQ with a LOC that is west of the Suez or east of the Purple Line. This can occur both during the activation phase and in the Supply and Infrastructure phase. If it occurs during the Activation Phase, the HQ must not have moved when it was activated.
3The Israeli player may flip a spent HQ that moved regardless of location during the Activation Phase.
1

9.3 Supply Phase End

After spending any Supply in the Supply and Infrastructure phase, place your Supply marker on top of your Infrastructure marker on the Replacements, Infrastructure, and Supply Track. This is the amount of Supply Points you will have for the turn until this phase occurs again.

Note: If you reduce the Infrastructure value, the Supply marker does not immediately reduce with the Infrastructure marker. The Supply marker stays where it is on the track until the next Supply and Infrastructure Phase when they join up again.

10.0 The Air Game

10.1 The Air Allocation Phase

Both players perform the following actions in this order during the Air Allocation Phase of the Game Turn.

  1. Both players return friendly Aircraft that are still in Air Mission Boxes to their respective Available Aircraft Boxes.

  2. Both players attempt to repair damaged Aircraft.

  • a. First the Israeli Player, then the Arab Player, attempts to repair damaged Aircraft.
  • b. Roll a D10 for each Aircraft in your Damaged Aircraft Box on the Air Display. Each country has the required roll to repair aircraft on the Air Display. If you roll this number or less, the Aircraft is repaired.
  • c. Repaired Aircraft move from your Damaged Aircraft Box to your Available Aircraft Box. If at reduced strength, the counters are not flipped to their full-strength sides.
  • d. The Israeli player may roll once per aircraft to return eliminated steps back to the Available Aircraft box. Roll for each reduced IAF aircraft. If rolling for an Aircraft in the Eliminated box a 4 or less returns the Aircraft reduced to the Damaged Aircraft box. Recovered Israeli Aircraft do not reverse Victory Points awarded to the Arab side for their original loss.

10.2 Air Forces Commitment Phase

10.2.1: Use your Air Display to assign your Aircraft to Missions. You may only assign Aircraft in the Available Box to Missions. In addition, each Aircraft or Helicopter must be assigned an Airfield from which to launch. Transport aircraft and Helicopters are placed in the Available for Transport box.

10.2.2: Each undamaged Israeli Airfield in the Airfields box can launch up to 5 Aircraft per Airfield. Each undamaged Arab Airfield can launch up to 4 Aircraft. If specified in the Scenario instructions, this number can be reduced. The owning player chooses which aircraft use which airfields to fly. Damaged Airfields cannot launch Aircraft.

Should the US Intervene, the USN planes fly from Carriers and may always fly without needing an Airfield. They are just placed in the Available Aircraft or Damaged Aircraft boxes as needed.

Aircraft that use an airfield to fly may perform missions. If there are not enough airfields for all aircraft to fly, the remaining aircraft stay in the Available Aircraft box for the turn and are not available for use.

10.2.3 To assign your Aircraft, follow these steps:

  • A. Move the counters from the Available Aircraft Box and place them on top of your available airfield counters. The limit is up to 5 aircraft counters per airfield counter for Israel, and up to 4 aircraft per airfield counter for the Arab player.
  • B. The Israeli player assigns which aircraft will fly on the Golan Front and which will fly on the Sinai Front. A minimum of 1 F-4 Aircraft and 1 A-4 Aircraft plus at least 1 other aircraft must be assigned to each front or the Israeli Player will lose Victory Points.
  • C. The Arab Player assigns missions to his aircraft.
  • D. The Israeli Player assigns missions to his aircraft.

10.2.4: You may assign Aircraft to the Missions indicated in either Table 10.2.4A or 10.2.4B below, depending upon Phase.

10.2.5: Most missions are resolved in the Air Mission Resolution Phase. Ground Support is resolved during the Activation Phase, and Interdiction is resolved at any time an enemy LoC is traced.

10.2.6 For Ground Support: Add up all the Tactical Mission ratings for Aircraft placed in the Ground Support Box for each Front and place the Ground Support marker on that value on the Player Aid. The marker value cannot exceed 9 although Aircraft that exceed this total Tactical Mission rating may still be placed in Ground Support and used as Ground Support during the Activation Phase. Note that the value determined here does not reduce as aircraft are used for Ground Support during the Activation Phase.

10.3 Air Mission Resolution Phase

During this phase, resolve Combat Air Patrol first. After these missions are resolved, the Israeli Player determines the order in which other all other Missions are resolved during this phase. Resolve all Missions in one Mission Box before moving on to the next box. Air-to-Air combat always used a D10 while all other missions use a D6. Only planes on the Sinai front may perform missions on that front. Only aircraft on the Golan front may perform missions on that front.

10.3.1.1 Resolving Combat Air Patrol Missions: Determine which players have Aircraft in Combat Air Patrol Boxes.

  • If neither player has Aircraft in this box, move on to the next type of Mission.

Table 10.2.4-A Air Missions Performed during the Air Mission Resolution Phase

MissionPurposeAircraft Required
The Combat Air Patrol BoxEstablish Air Superiority over the battlefield and intercept enemy planes performing missions.Aircraft with Air-to-Air Ability
Airfield StrikePunch holes in runways and limit Aircraft launches.Aircraft with Air-to-Ground ability
SAM SuppressionReduce the enemy air defenseAircraft with Air-to-Ground ability
Nuclear Strike (Israeli Player only)Obliterate Airfields or key hexes.Nuclear Capable Aircraft Only
Interdiction StrikeAttempt to block enemy LOCs and thereby prevent enemy actions.Aircraft with Air-to-Ground ability
Infrastructure StrikeReduce the enemy's infrastructure and degrade his warfighting capacity.Aircraft with Air-to-Ground ability
Bridges StrikeDestroy Arab Suez Canal Pontoon Bridges

Table 10.2.4-B Air Missions Performed during the Activation Phase

MissionPurposeAircraft Required
Interdiction StrikeAttempt to block enemy LOCs and thereby prevent enemy actions.Aircraft with Air-to-Ground ability
Ground SupportAir Support for Units in combat.Aircraft with Air-to-Ground ability
  • If both players have Aircraft in this box, conduct air-to-air combat.
  • If only one player has Aircraft in this box, those Aircraft may attack enemy aircraft on the same front in other mission boxes.

10.3.1.2 Air-to-Air Combat:

To resolve air-to-air combat:

  1. Determine the Air-to-Air Ability of each Aircraft in the box. Add 2 if there is an Ace on the attacking player's aircraft. Subtract 2 if the Aircraft is Syrian.
  2. The Aircraft with the highest modified Air-to-Air Ability fires first. If there are multiple Aircraft with the same Air-to-Air Ability, take turns firing from those Aircraft, with the Israeli player taking the first shot. Combat is sequential (not simultaneous).
  3. Proceed through the other Aircraft in the box in order of Air-to-Air Ability, highest to lowest.
  4. Each Aircraft attacks only once.

When your Aircraft fires, select an enemy Aircraft to target and roll a D10. If the result is equal to or less than your Aircraft's Air-to-Air Ability, the enemy target is damaged. If the target counter is at full strength, flip it to its reduced side and place it in its Damaged Aircraft Box. If the target counter is already reduced, remove it from play. These units can return to play as international aid increases. See the Politics rules for more information on this (see 17.0).

10.3.1.3: If the Arab Player removes all enemy Aircraft from their Combat Air Patrol Box through Air-to-Air combat, they gain 1 VP for the great publicity around their victory. Unused Aircraft remaining in the Air-to-Air mission box may conduct Free Attacks on enemy Aircraft performing other Missions.

10.3.1.4: If both sides still have Aircraft in the Combat Air Patrol Box at the end of Air-to-Air Combat, move the Aircraft to their respective Available Aircraft Boxes. They are done for the turn.

10.3.1.5 Free Attacks on Arab Aircraft: If there are IAF Aircraft in a Front's Combat Air Patrol box and no Arab Aircraft in their box at the completion of the Air Combat Stage (including if the Arab never sent Aircraft into the CAP box), the IAF Aircraft may make free attacks on Arab Aircraft on the same front in any Mission boxes:

  1. Select one Mission Box containing enemy Aircraft.
  2. For each Aircraft you have in the Combat Air Patrol Box, target one enemy Aircraft in the selected box.
  3. Each of your Aircraft fires only once.
  4. Apply the following modifiers to the attacking Aircraft's ability:
  • +2 if the Attacking Aircraft has an Ace
  • -2 if the Attacking Aircraft has a Novice Pilot
  • -2 if the Aircraft is Syrian
  • -1 if it the attacking aircraft is reduced

Roll a D10. If the result is equal to or less than the Aircraft's Air-to-Air Ability, the target is damaged. If the target Aircraft is at full strength, flip it to its reduced side and place it in its Damaged Aircraft Box. If the target Aircraft is already reduced, remove it from play.

Free Attacking Aircraft may not be fired upon. When all Free Attacking Aircraft have fired, return them to their Available Aircraft Box.

10.3.2 Infrastructure Strikes:

For each Aircraft in the Infrastructure Strike Box, roll a D6 and compare the result to your aircraft's Air-to-Ground Ability.

Apply the following modifiers to your aircraft's Ability:

  • -1 if it the aircraft is reduced
  • +2 if the aircraft has an Ace
  • -2 if the Attacking Aircraft has a Novice Pilot

Note if the value for an Aircraft is less than 1, it may still fly the mission but must roll a one to succeed and the hit will be less valuable than a 1 rolled with other aircraft.

10.3.2 Infrastructure Strike Results

RollResult
≤ Aircraft's Air-to-Ground Ability, but >1Reduce the enemy Infrastructure value by 1.
1Reduce the enemy Infrastructure value by 2.
If the Aircraft had a modified value less 1 and rolled a 1Reduce the enemy Infrastructure value by 1.

Otherwise, the strike has no effect. When Infrastructure Strikes are complete, return the Aircraft in the Infrastructure Strikes Box to their Available Aircraft Boxes.

10.3.3 Airfield Strikes:

  1. Perform Enemy SAM fire on Striking Aircraft (see 10.5)
  2. The Striking Player chooses an Airfield Box to attack. The Egyptian box may only be attacked by Israeli aircraft on the Sinai front and Syrian box may only be attacked by aircraft on the Golan front. Only airfields in this box are affected.

For each aircraft in the Airfield Strike Box, roll a D6 and compare the result to each of your aircraft's Air-to-Ground Ability.

Apply the following modifiers to your Aircraft's Ability:

  • -1 if it the aircraft is reduced
  • +2 if the aircraft has an Ace
  • -2 if the Attacking Aircraft has a Novice Pilot

Note if the value for an Aircraft is less than 1, it may still fly the mission but must roll a one to succeed and the hit will be less valuable than a 1 rolled with other aircraft.

10.3.3 Airfield Strike Results

RollResult
≤ Aircraft's Air-to-Ground Ability:Damage an Airfield in the targeted Airfield box. Flip the Airfield marker over to its damaged side.
1Damage two target Airfields in the targeted Airfield box. Place both Airfields in the Damaged Airfield Box.
If the Aircraft had a modified value less 1 and rolled a 1Damage the target Airfield. Place the Airfield in the Damaged Airfield Box.

Otherwise, the strike has no effect. When Airfield Strikes are complete, return the Aircraft in the Airfield Strikes Box to their Available Aircraft Boxes.

10.3.4 SAM Suppression Strikes

  1. Perform enemy SAM fire on the Striking Aircraft (see 10.5)

  2. For each Aircraft in the SAM Suppression Box, roll a D6 and compare the result to your Aircraft's Air-to-Ground Ability.

Apply the following modifiers to your Aircraft's Ability:

  • -1 if it the aircraft is reduced
  • +2 if the aircraft as an Ace
  • -2 if the Attacking Aircraft has a Novice Pilot

Note if the value for an Aircraft is less than 1, it may still fly the mission but must roll a one to succeed and the hit will be less valuable than a 1 rolled with other aircraft.

10.3.4 SAM Suppression Strike Results

RollResult
≤ Aircraft's Air-to-Ground Ability:Flip two SAM markers over to their suppressed side. Recompute that side's SAM Support and adjust immediately.
1Flip three SAM markers over to their suppressed side. Recompute that side's SAM Support and adjust the marker immediately.
If the Aircraft had a modified value less 1 and rolled a 1Flip two SAM markers over to their suppressed side. Recompute that side's SAM Support and adjust the marker immediately.

10.3.5 Nuclear Strikes:

Only the Israeli may launch Nuclear Strikes, and these can only be performed by Aircraft that are in the Nuclear Armed box. Aircraft get to these boxes through the Politics table. Strikes may only be performed if authorized by the Politics phase. Aircraft in these two boxes cannot perform any other missions nor do they need an Airfield to fly. Only Nuclear-capable aircraft may be in either of these boxes. If allowed, determine the target of the Nuclear Strike. You may choose one of the enemy's Airfields box, the enemy's Infrastructure marker, or a hex on the map. There is no roll for this nor is there SAM fire; effects are automatic.

10.3.5 Nuclear Strike Options

TargetResult
An Airfield Box• Remove 2 Airfields from the chosen box. These are removed from play permanently. • Remove 2 Aircraft from the Available or Damaged Aircraft boxes (owning player choice). These are permanently removed from play and may not return again. • Place a Nuclear Attack marker in the box.
A Hex• Move any Units in the hex to their Replacements Box • Place a Nuclear Attack marker in the hex. • Any HQ entering the hex will be Displaced. • No Unit may end its movement in the hex. • The hex no longer has any roads of any type running through it.
The Infrastructure Marker• Reduce the enemy Infrastructure marker by 4.

When a Nuclear Strike is complete, return the aircraft to the Available Aircraft Box. These aircraft are available for use on other missions. Only one nuclear attack per game may be launched.

See 16.3 for additional information on Nuclear Attacks and their effect.

10.3.6 Bridges Strikes Missions:

  1. Perform enemy SAM fire on the Striking Aircraft (see 10.5)

  2. For each Aircraft in Bridges Strike Box, roll a D6 and compare the result to your Aircraft's Air-to-Ground Ability.

Apply the following modifiers to your Aircraft's Ability:

  • -1 if it the aircraft is reduced
  • +2 if the aircraft as an Ace
  • -2 if the Attacking Aircraft has a Novice Pilot

Note if the value for an Aircraft is less than 1, it may still fly the mission but must roll a one to succeed and the hit will be less valuable than a 1 rolled with other aircraft.

10.3.6 Bridges Strike Results

RollResult
≤ Aircraft's Air-to-Ground Ability:The Bridge is damaged. Award the Israeli player a VP; no further game effect. If the Bridge is a Decoy, remove it from play.
If the Aircraft had a modified value less 1 and rolled a 1Roll a D6 and if the Israeli player rolls a 1-3, the Bridge is damaged. Award the Israeli player a VP; no further game effect. If the Bridge is a Decoy, remove it from play. If a 4-6 is rolled, there is no effect from the strike.

10.4 Activation Phase Mission Resolution

These missions occur as the owning player wishes when the conditions for the mission are met. Once the mission has been completed, return all used aircraft to the Available Missions box for use on the next game turn.

10.4.1 Interdiction Missions

An Interdiction is an attempt by aircraft to prevent enemy ground forces from taking actions requiring a LOC.

Interdiction Missions may happen during several different phases. An Interdiction is an Aircraft from its owner's Interdiction Box attempting to block an LOC required for an enemy action. When certain enemy actions listed below are taken, you may attempt an Interdiction with Aircraft in your Interdiction Box. You may only attempt one Interdiction, with one Aircraft, per enemy unit or HQ, per enemy action. These actions are listed in the table below. As before, you can only interdict missions on the same front as the aircraft. Interdictions may be attempted as follows:

10.4.1 Interdiction Mission Results

If the Enemy...A Successful Strike Means...
Attempts to move an HQ or refresh a HQ during the Activation PhaseThe target HQ or Unit cannot use Movement or refresh this turn.
Attempts to flip a Spent Unit to its Fresh sideThe target Unit cannot be flipped to its Fresh side this phase.
Calls for Artillery Support during a combatNo Artillery Support is available in this combat for the interdicted side.

10.4.2 Interdiction Resolution

10.4.2.1 Procedure: The Interdicting player announces the Interdiction Mission and selects one (only) Aircraft from his Interdiction Box to perform it.

10.4.2.2 Resolution: To resolve an Interdiction Mission:

  1. Perform SAM Fire (see 10.5)
  2. Roll a D6 and compare the result to your Aircraft's Air-to-Ground Ability. If the result is equal to or less than the Air-to-Ground Ability of the Aircraft, the Interdiction is successful. Apply the result per the table in 10.4.1

Apply the following modifiers to your Aircraft's Ability:

  • -1 if it the aircraft is reduced
  • +2 if the aircraft as an Ace
  • -2 if the Attacking Aircraft has a Novice Pilot

10.5 SAM Fire

10.5.1 SAM Support Markers

Both players have several SAM markers that will be placed in the SAM box on their Air Display per the scenario instructions. When allowed SAM fire, total the number of SAMs in the SAM box and divide this number by 2 (rounding down) if Egyptian, use the raw total if Israeli or Syrian. This is the base SAM fire for each player. To this value, an additional amount may be added due to reinforcements or political events. This additional value is always present regardless of the raw value. Mark this total value (RAW plus any allowed additional value) on the Player Aid with that side's SAM Support marker for use in play. On the Air Display and for each mission, there is a SAM modifier for that type of mission. Add or subtract that modifier from the SAM Support value and roll a die to resolve SAM fire. Should you roll that number or less, the Aircraft does not complete that mission, is reduced (or eliminated if already reduced) and is placed in the Damaged Aircraft box.

Note there is an extra Arab SAM Support marker on sheet 3. You won't need it for the game.

10.5.2 SAM Coverage

The Israeli and Syrian players can fire SAMs at all enemy aircraft on their fronts without regard to where the mission is taking place. Egyptian SAMs can only fire SAMs at Ground Support or Interdiction missions if they are within active SAM arcs as displayed on the Sinai map.

There are two colored arcs on the map – a white one (that always applies) and a purple one (which may or may not apply). The purple circles apply if the Egyptian player was the last player to enter the SA-6 site hex that is the center of that purple arc. Should the Israelis be the last to enter it, the arc will not exist for SAM fire.

After the Egyptians take a SA-6 site hex, the purple arc is active as long as the Egyptian player controls the hex. Should the Israeli player re-enter the SA-6 hex after it has been captured by the Egyptian player, roll a die. 1-4 and the Israeli player may place a SA-6 brigade (112 or 116) in the Destroyed SAM Site box of the Arab Air Display. 5-6 is no effect.

If the Israeli player can do this successfully twice and two SA-6 brigades are in the Destroyed SAM Site box, the purple arcs are no longer in effect regardless of who controls each SA-6 site.

The Egyptian SAM sites on the map are eliminated if an Israeli player enters the hex they are in.

For each SAM site eliminated (including rolling 1-4 above), place the destroyed SAM site in the Destroyed SAM Site box and remove 3 SAMs from the Egyptian SAM box and recompute the SAM Support value immediately.

11.0 Morale

There are three morale states which can adversely affect Units.

11.1 Disrupted Units

Units become Disrupted when retreating 2 spaces following combat. The Disrupted effects apply immediately when a unit begins a retreat of 2 hexes.

A Disrupted Unit:

  • cannot retreat in combat,
  • the unit's size may not be counted in combat
  • cannot use Artillery Support if it is the defending Unit in a Combat Hex,
  • remains Disrupted even if flipped to its Fresh side
  • removes the marker when an HQ activates it, but the Unit does nothing except remove the marker. This spends the unit.

11.2 Routed Units

Units become Routed when retreating 3 spaces following combat. The Routed effects apply immediately when a unit begins a retreat of 3 hexes.

A Routed Unit:

  • cannot retreat in combat
  • cannot attack or provide Combat Support
  • the unit's size may not be counted in combat
  • cannot receive any Combat Support of any kind when defending,
  • has no ZOC
  • removes the marker when an HQ activates it, but the Unit does nothing except remove the marker. This spends the unit.
  • gets a Low Morale marker when the Routed marker is removed.

11.3 Low Morale

Units that are Routed gain a Low Morale marker when their Routed markers are removed. A Unit with a Low Morale marker:

  • may not place a combat chit until the marker is removed,
  • adds 1 MP to the cost of each hex entered during Exploitation Movement, and
  • removes the marker when it participates in a combat won by its side.

A Unit may have a Low Morale marker and a Disrupted/Routed marker at the same time if it retreats while having Low Morale. A unit with Low Morale that receives another Low Morale marker is unaffected.

12.0 Headquarters

Headquarters (HQs) allow for activation of units throughout the game. Any HQ can activate units (example: the Egyptian Second Army can activate units normally). The Activation Phase must end when all HQs are spent (although the players may choose to end it before this).

12.1 Communication Trace

HQs also can be used to provide for a Line of Communications (see 3.6). These types of counters have command ranges displayed on the counter. Range is always traced from the unit attempting to be in communications to the HQ being traced to. Use the range on the HQ to which the unit or HQ is tracing. Brigade (Israeli) and Division (Arab) HQs trace to units by hexes without regard to terrain or enemy presence. All other HQs trace their Line of Communications trace using a hypothetical unit in Road Column mode. This type of trace cannot be through enemy units and all enemy ZOCs traced through costs additional movement points depending on the size value of the enemy units that can project into the hex through which you are tracing. These HQs must also always trace along a road.

12.2 HQ Displacement

If an enemy Unit enters the hex solely occupied by a friendly HQ, immediately displace the HQ. The enemy unit pays no additional movement cost to do this. The owning player moves the HQ at least five hexes away from the enemy Unit that displaced it but may move it as far away (unlimited Movement Points) as the owner wishes while following normal movement rules. The final hex placement may not be in an enemy ZOC. Israeli HQs on the Sinai front and all Arabs on the Syrian front HQs must be moved east for their entire Displacement move. Israeli HQs on the Golan front and all Arab HQs on the Sinai front must be moved west for their entire Displacement move. A Fresh HQ which is Displaced becomes Spent.

Headquarters that are fresh may be voluntarily displaced as an action (it may not activate units when doing so). The HQ becomes spent after doing this.

Headquarters can also be voluntarily displaced during the Eliminate Friendly Units phase as well. They may be spent or fresh when they do this and may refresh normally during the Supply/Infrastructure Phase of the Game Turn.

Headquarters can't retreat nor be used to satisfy losses. If it is in a hex from which units retreat and enemy units enter the hex, the HQ is immediately displaced.

Important: HQs can never be eliminated. If displacement would force an HQ off the map, it arrives in a friendly supply source hex the next turn as a reinforcement.

13.0 Markers

13.1 Cup of Snafu Markers

At the start of a scenario, put the Cup of Snafu markers, as directed by the Sinai theater commander currently in command, into a cup to allow for random drawing. Restock the cup during the reinforcement phase of the turn in which a new leader is in command. Snafu markers that are on units, stay on units even if that type of marker is no longer used in the cup.

The Cup of Snafu markers are colored differently from all other markers. The Israeli markers are blue while the Arab markers are dark orange. The Israeli markers affect Israeli units (for good or bad) while the Arab markers affect the Arab units (for good or bad).

13.1.1 The Cup of Snafu is used when a marker of the following type is placed on a unit or if a random event calls for it. Additionally, Israeli Low Ammo/No Ammo markers are used when the Hull Down marker is placed, and Great Leader Markers are used when Bar-Lev takes command on the Sinai. Just fish these out of the cup and place as needed.

An Out of Contact, Disrupted or Routed marker is placed on a unit:

Draw from the Cup of Snafu when a unit gains an Out of Contact marker, when a unit is disrupted or routed, or if a random event occurs in combat. In the first two cases, draw one marker from the cup. If a unit is routed, draw twice from the cup. The enemy player (the player not receiving the marker) performs the draw in these cases. The enemy player may examine the marker and place the marker on the side of the marker he prefers (in all cases, the enemy should choose the worse state of the two sides if there is a choice). For example, if he draws a Low Ammo/No Ammo marker, there is no reason to not place the No Ammo marker on his enemy. Or, if it applies to his units, he can decline to place the marker and put it back in the cup. In the case of a routed unit, while he draws two markers, he may only apply one marker of his choice and returns the extra draw to the cup.

Example: The Arab Player is placing a Cup of Snafu marker when an Israeli unit is routed. He chooses two markers from the cup and sees an Arab Low/No Fuel marker and an Israeli Great/Poor Leader. The only marker that hurts his opponent is the Poor Leader marker. He places that one on the routed Israeli unit and returns the Arab Low/No Fuel marker to the cup.

A Random Event occurs requiring placement:

If a Random Event occurs that requires placement, the marker must be placed on one of the units involved in the combat (and it can be a unit from either side depending on the marker). The player who is drawing the marker (as stated in the random event) chooses which side of the marker to place on which unit.

Example: A random event has come up that requires the Israeli player to draw from the Cup of Snafu. He chooses one marker and gets an Israeli Low/No Fuel marker. He must place this marker, so he chooses one of the units in the combat and places the marker on its Low Fuel side. If he had chosen an Arab Low/No Fuel marker instead, he could place the marker on any Arab Unit in the combat and would place the marker on its No Fuel side.

If there are no markers remaining in the Cup of Snafu, no draw is made and there is no additional effect.

13.1.2 Cup of Snafu markers

Cup of Snafu markers that apply to both sides:

  • Low Fuel: A unit that has this marker may not perform Secondary Movement (see 7.5) or Exploitation Movement (see 7.6.12). It may also not enter Road Column. If it is in Road Column when the marker is chosen, it automatically deploys in the hex. The marker is removed and placed back in the cup during the Supply and Infrastructure Phase if supply points are spent (see 9.2).
  • No Fuel: A unit that has this marker may not move nor spend any movement points. It stays in the hex it is in until the marker is removed. If the unit is in Cross-Country or Road Column, remove the marker and the unit automatically deploys. The marker is removed and placed back in the cup during the Supply and Infrastructure Phase if supply points are spent (see 9.2).
  • Low Ammo: A unit that has this marker may not provide size support to an adjacent combat and can only use its primary equipment in combat. If used, this primary is always considered Secondary equipment on the Terrain Effects Chart. The marker is removed and placed back in the cup during the Supply and Infrastructure Phase if supply points are spent (see 9.2).
  • No Ammo: A unit with this marker has no ZOC and cannot use its equipment (of either type) in a combat. The marker is removed and placed back in the cup during the Supply and Infrastructure Phase if supply points are spent (see 9.2).
  • Key Leader Casualty: A unit that has this marker chosen for it has a Low Morale marker placed on it (with all effects of that marker). In addition, if the unit has a Great Leader, it is removed and placed back in the cup. The marker is returned to the cup after adding the Low Morale marker.
  • Great Leader: A unit with this marker allows the owning player to reroll his die roll in any combat. If the enemy has a Poor Leader in the combat, the owning player could reroll his and his opponent's dice. Rerolling is optional at the choice of the player with the Great Leader and/or the player that does not have a poor leader. Only one Great or a Poor Leader would apply to each side (should they both be present on one or both sides) in a combat (the player drawing the marker chooses which will be used in the combat). A Great Leader marker is only removed if the "Key Leader Casualty" marker is chosen or the unit is eliminated from play (in which case, all of its markers would be removed). Place the marker back in the cup if removed in one of these ways.

Israeli Player Cup of Snafu Markers:

While the improvisational nature of the IDF had its advantages, it could also be a disadvantage. These markers cover the propensity of the IDF to ad hoc their forces. Sometimes they were where you wanted them; sometimes they weren't.

  • TOE Snatched: Units that get this marker are assumed to have lost some of their TOE to another unit. The player that drew the marker may choose with unit must reduce the primary and secondary equipment by two steps. If only one step remains or the unit has no equipment, the excess is ignored.
  • TOE Enhanced: Units that get this marker are assumed to have added some equipment for the TOE of another unit. The player that drew the marker may choose which unit adds to the primary and secondary equipment by two steps. Leave the TOE Enhanced marker on the unit. It is removed if the unit is eliminated or a TOE Snatched is drawn (regardless of who draws it, the TOE Snatched marker must eliminate this marker if it is present). If the unit has no equipment, the marker is ignored.

While a TOE Enhanced marker is on the unit, it adds an automatic additional +2 modifier to a successful equipment roll.

Arab Player Cup of Snafu Markers:

  • Ambushed: The Arab unit (the drawing player deciding to which Arab unit in the combat the marker would apply) loses a size step immediately. If this is a combat, all Arab units in the combat lose a size step immediately
  • Desertions: A unit with this marker (the drawing player deciding to which Arab unit in the combat the marker would apply) is removed from the game. It may not return to the game being played. Return the marker to the cup after application of its effect.

The Cup of Snafu markers are limited to the counter-mix and no additional markers may be made.

If the marker is drawn but does not apply for any reason, place it back in the cup but do not draw again.

13.2 Loss markers

Loss markers are used to show losses to Infantry (size), equipment, or artillery. These markers have graphics for each side's equipment, but they can be used interchangeably.

13.2.1 Equipment Losses are tracked using the -1, -2, Half, and No markers for both Primary (if the unit has) and (if the unit has) Secondary Equipment. With each equipment loss, increase the value of the marker by one. The marker can be reduced or removed by the use of replacements (see 15.2), or if equipment arrives on the reinforcement schedule in the scenario. The effect of equipment loss is shown on the Terrain Effects Chart as a reduction in a modifier to a combat.

All Arab Units that are without all of their equipment (and began with equipment) are eliminated from the game. Israeli Units stay in game even if all their equipment is lost (or abandoned).

A unit may also abandon its equipment when it activates (although it must be done before it moves) in order to enter terrain that equipment is prohibited from entering (or for any other reason). Just place a No Primary and/or a No Secondary equipment marker on the unit.

13.2.2 Infantry (size) losses are tracked using the -1 and -2 Infantry size markers. There are no Half and None markers for infantry. If the -1 or -2 marker is placed on the unit, reduce the printed size of the unit by that amount for all game rules. This would include size for combat, ZOC cost, and stacking. If a unit receives a loss that would increase the marker to more than -2, the unit is eliminated and placed in the Replacements box. Units that have less than 3 size value still require three Units that have less than 3 size value are eliminated placed in the replacements box once they are reduced to 0 in size. If a unit starts at 0 size, it is eliminated when it loses one size loss.

Units that are eliminated from the game are placed in the "Replacements" box. Units eliminated from the "Replacements" Box are placed in the "Destroyed Units" box. Units eliminated from the "Destroyed Units" box are removed from the game.

Note that a unit can have no equipment remaining but still have size. They are just on foot if so.

13.2.3 Artillery losses are tracked a little differently than unit equipment losses. These losses are tracked by placing the loss marker on the Division that was involved in the combat. This will reduce the needed value on the player aide by the losses on the HQ for all artillery support used by units of that Division. Remember, the value on the Player Aid does not reduce – only modify that number on the Player Aid by the loss marker on the Division for all calls for artillery support by units of that Division with the loss marker. Artillery losses can only be replaced by reinforcements listed on the schedule.

Players can make more of these markers if needed in the game. They are not limited by the counter-mix.

13.3 Air Game markers

13.3.1 Airfield markers are placed in the appropriate Airfields box on the Air Display.

13.3.2 SAM markers are covered in rule 10.5.

13.3.3 Ace markers are placed per the intructions in the scenario. Aces add 2 to the value of the plane performing a mission. Novices subtract 2 from the value of the plane performing the mission. If the Aircraft unit that has an Ace is damaged or loses a step, roll a D6. Should the Israeli player roll a 1 or the Arab player roll a 1-4, the Ace is flipped to its Novice side. Novice pilots can never be removed. Once added to an aircraft, an Ace or Novice marker cannot move to another aircraft and are always eliminated from play if the aircraft unit to which they are assigned is eliminated from play.

Units that are Ace Pilots on their Aircraft marker always are Ace Points (they never become Novice Pilots). East German Aircraft never lose their Ace status.

All Air Game markers are limited by the counter-mix.

13.4 Status Markers

Status markers are always placed on units and impact the unit in various ways as listed below.

  • Road Column markers are placed on a unit when active and the owning player wishes to move the unit. These are removed when the unit Bivouacs (see 7.10) or the unit deploys. All hexes entered by a unit with a Road Column marker costs one movement point (unless moving along a road). Roads may be used at the cost of ½ movement point per hex. Trails cost one movement point to enter but negate other terrain. Bridges may only be used by these units. Combat chit placement costs are lower for units in Road Column and units in Road Column may not use friendly units that are adjacent to a combat hex to join in the combat. Roads do not negate terrain for any steps in 7.6.2. The Combat Chit terrain is used for all calculations/modifiers.
  • Cross-Country markers are placed on a unit when active and the owning player wishes to move the unit. These are removed when the unit Bivouacs (see 7.10) or the unit deploys. All hexes entered by a unit with a Cross-Country marker costs one movement point. Units with a Cross-Country marker cannot use roads to move nor cross rivers or canals using a bridge. If a unit enters restricted terrain (as noted on the TEC), it loses two of its movement points.
  • Disrupted markers are placed on units that retreat 2 hexes from a combat. See 7.6.10 for additional information.
  • Routed markers are placed on units that retreat 3 hexes from a combat. See 7.6.10 for additional information.
  • Dug In markers are placed, if the Arab player wishes, on any Arab Unit that did not retreat from an Israeli attack. Should the Israeli player attack a hex with a Dug-In marker, the marker counts as one or two towards honoring any Arab player combat spread losses. Once used, they are removed.
  • HQ Interdicted markers are placed on a unit when it has been successfully interdicted by an air mission. When placed on a HQ, that HQ is spent. It may not refresh until the next Supply and Infrastructure Phase of the game turn.

Color codes are provided for flavor and ease of identification but there is no functional reason both markers can't be used by both players.

In all cases for the Status markers above, players may make more markers as needed.

13.5 Combat Markers

At the beginning of every scenario, place all Israeli Attack markers in one cup. Place all Arab Attack markers in another cup. These chits are used when combat is declared.

13.6 Miscellaneous Markers

  • The Turn marker is used to show what day the game is on the General Player Display.
  • Israeli and Arab Support marker is used on the General Player Display to record equipment support (as well as Artillery) for modifying an upcoming combat.
  • Israeli and Arab DRMs marker is used on the General Player Display to record size and terrain benefits each side receives in an upcoming combat.
  • Nuclear Attack/Nuclear Fallout is placed in the hex or boxes that has been struck by Nuclear Weapons. See 10.3.5 for additional information.
  • Israeli, Syrian, and Egyptian Infrastructure markers are placed on the Replacements, Supply, and Infrastructure track on the owning Player Aid.
  • Israeli, Syrian, and Egyptian Supply markers are placed on the Replacements, Supply, and Infrastructure track on the owning Player Aid.
  • Israeli and Arab Replacements marker is placed on the Replacements, Supply, and Infrastructure track on the Player Aid. Note that all Arabs may use the replacements marker regardless of front or nationality.
  • Israeli, Syrian, and Egyptian Victory Points markers are placed on the owning Player aid. Only Victory Points earned on Sinai front add to the Egyptian marker; only Victory Points earned on the Golan front add to the Syrian marker. Israeli Victory Points earned on either front are tracked using the Israeli marker.

14.0 Special Units and Leaders

14.1 Reconnaissance Units

Several types of equipment (as marked on the Player Aids) are reconnaissance equipment. If a battle occurs with attacking units that have this equipment in the battle, add two to the attacker's exploitation movement value as on the Combat Chit (they get two extra movement points to use to exploit).

Arab BRDM units do not offer any Equipment Support but do add the two to the Exploitation value if present.

14.2 Amphibious Units

Several types of equipment (as marked on the Player Aids) are Amphibious equipment. These so equipped units may move over water/river hex-sides that are normally not passable for all other units. In the case of the PT-76 Equipment, that is the only purpose it serves. There is no tank or APC Equipment Support roll for units with this equipment.

14.3 269 S Matkal (Israeli Special Forces)

The General Staff Reconnaissance Unit or Unit 269 (also known as just "The Unit") is the elite of the elite. Israeli Special (Sayeret in Hebrew) General Staff (Matkal in Hebrew) is the Israeli equivalent of the USN Seals or Delta Force in the US Armed Forces. This unit was created in 1957 and its mission statement was to carry out missions in enemy-held territory and perform top secret intelligence. It was famous for both its operations in the Yom Kippur War but also for the Entebbe rescue.

Special rules for this unit:

  • Always has a Great Leader and ignores results that would change its Elite status or Great Leader.
  • This unit may never retreat in combat nor use replacements to honor a combat spread.
  • This unit may use up to 4 Victory Points to honor a combat spread.
  • This unit is never subject to the Cup of Snafu.
  • This unit is never Out of Contact and may activate as a single unit normally without an HQ being within range without restriction.

This unit also gives the Arab player Victory Points if the following events occur:

  • If the unit is placed on the map from the Paratroopers at Airfield box: 1 VP
  • If the unit is eliminated: 3 VPs

If a POW point is captured from this unit add 3 POW points instead of the normal 1.

14.4 Leaders

There are several leaders in the game to represent major persons in the conflict.

14.4.1 Theater Commanders

These units are placed on the owning player's Player Aid in the appropriate box and have effect throughout the theater in which they are in command.

14.4.1.1 Israeli Theater Commanders

Sinai Front starts the game commanded by Shmuel "Gorodish" Gonen. He is in command until relieved by Bar-Lev. All effects of Gonen apply until relieved by Bar-Lev. Bar-Lev's effects apply immediately when he takes command.

Effects of Gonen being in command:

  • The Israeli Player may only place Immediate Attack combat markers (he can't use Determined Attack chits)
  • The Israeli player may not enter any hex west of the Suez Canal.
  • All HQs are Spent after use and may not refresh during the Activation Phase.
  • The Israeli player may not use "Reaction Movement" during the Arab Activation Phase.
  • The Israeli player may only activate up to 4 units with each HQ activation.
  • The Israelis cannot use any Combat Support (only the Unit that placed the Combat Chit is considered for combats - no additional Israeli Units may be in the Combat.
  • The Israeli player may not use Victory Points to honor a combat spread.
  • The Israeli player must use Tank Equipment if present in the unit; no units may voluntarily abandon their equipment.
  • The Cup of Snafu consists of the following Israeli markers: all Low/No Fuel, all Low/No Ammo, all Key Leader Casualty/C&C Breakdown, and all Great/Poor Leader markers. No others are placed in the cup.
  • The Israeli Player may activate up to 6 units with each HQ Activation
  • The Israeli Player may activate up to 4 units with each HQ Activation

Gonen is relieved during the Reinforcement/Replacement phase of October 10 turn. His counter is flipped to the Bar-Lev side and for the remainder of the war, Haim "Kiddoni" Bar-Lev is in command.

Effects of Bar-Lev being in command:

  • Remove any Disrupted, Routed, and Low Morale markers from all Israeli units during the Reinforcement/Replacement Phase of the October 10 turn.
  • Remove any Poor Unit/Poor Leader markers from all Israeli units during the Reinforcement/Replacement Phase of the October 10 turn.
  • The Cup of Snafu consists of the following Israeli markers: all Low/No Fuel, all Low/No Ammo, all TOE Snatched/TOE Enhanced markers. No others are placed in the cup.
  • After removing all Poor Leader markers, the Israeli player may place up to two Great Leader markers (if not currently in play on Israeli units) on any two units of his choice. All other rules apply as normal.

Golan Front starts the game commanded by Rafael "Raful" Eitan. He is in command until relieved by Hofi. All effects of Eitan apply until relieved by Hofi. Hofi's effects apply immediately when he takes command.

Effects of Eitan being in command:

  • The Israeli Player may use up to two Victory Points to honor a combat spread
  • All Poor Unit and Poor Leader markers are ignored if they are called for in the game
  • The Israeli player may not move east of the Purple Line

Eitan is relieved during the Reinforcement/Replacement phase of October 9 turn. His counter is flipped to the Hofi side and for the remainder of the war, Yitzhak "Haka" Hofi is in command.

Effects of Hofi being in command:

  • Remove any Disrupted, Routed, and Low Morale markers from all Israeli units during the Reinforcement/Replacement Phase of the October 9 turn.
  • The Israeli Player may activate up to 6 units with each HQ Activation

All other rules apply as normal.

14.4.1.2 Arab Theater Commanders:

Sinai Front starts the game commanded by Saad el-Shazly. He is in command until relieved by Sadat. All effects of el-Shazly apply until relieved by Sadat. Sadat's effects apply immediately when he takes command. With the following exceptions, all rules apply normally normally while el-Shazly is in command.

Effects of el-Shazly being in command:

  • The Arab Player may not move into a hex on the east side of the Suez Canal that is not under the SAM umbrella. If a unit finds itself outside of the umbrella, it must attempt to move back under it if it is active again.
  • The Cup of Snafu consists of the following Arab markers: all Key Leader Casualty/C&C Breakdown markers, and all Great/Poor Leader markers. No others are placed in the cup.
  • All other rules apply as normal.
  • The Arab Player may activate up to 4 units with each HQ Activation.

El-Shazy is relieved under certain conditions as listed below. Relief applies during the Reinforcement/Replacement Phase after the condition that caused relief occurred. When relieved, the counter is flipped to the Sadat side and for the remainder of the war, Muhammad Anwar el-Sadat in command.

Effects of Sadat being in command:

  • The Arab player may not use Victory Points to satisfy combat spreads
  • Remove any Great Leader markers that are currently on Arab Units.
  • The Cup of Snafu consists of all of the Arab markers: Desertion and Ambush are added to the cup.
  • The Arab Player may activate up to 2 units with each HQ Activation.

El-Shazly is relieved if the following occur:

  • If any Arab unit moves from the west side of the Suez Canal to the east side, roll a die. If you roll a 1-2, El-Shazly is relieved during the next Reinforcement/Replacement phase.
  • If an Arab unit moves out of the SAM umbrella during a Friendly activation.
  • If a Political Event (see 17.0) occurs which relieves El-Shazly, Sadat assumes command on the next Reinforcement/Replacement phase.

All other rules apply as normal.

Golan Front starts the game commanded by Bashar al-Assad. He is in command until relieved by Abrash. All effects of Assad apply until relieved by Abrash. Abrash's effects apply immediately when he takes command.

Note: Assad isn't being relieved in real terms – he just realizes that perhaps a professional might more up to the task and gives control of the military to Abrash.

Effects of Assad being in command:

  • The Arab Player may not use Victory Points and may only use up to 2 hexes to honor a combat spread
  • All Arab Exploitation Movement is limited to 3 hexes
  • HQ Refresh values are increased (see 9.2)
  • The Arab Player may activate up to 4 units with each HQ Activation

Assad is relieved during the Reinforcement/Replacement Phase as a political event. His counter is flipped to the Abrash side and for the remainder of the war, Omar al-Abrash is in command.

Effects of Abrash being in command:

  • Remove any Disrupted, Routed, and Low Morale markers from all Israeli units during the Reinforcement/Replacement Phase of the October 9 turn.
  • Up to 2 Great Leader markers (if available) may be placed on any Syrian units.
  • The Arab Player may activate up to 4 units with each HQ Activation.

All other rules apply as normal

14.4.1.4 Special Israeli Leaders

14.4.1.4.1 Ariel Sharon

The Sharon leader counter is placed on the 143rd Division HQ when he arrives via the Reinforcement schedule. The Sharon leader is always on the 143rd Division HQ and moves with the HQ if it should move. Sharon cannot be eliminated.

Effects of Sharon's Leader counter:

  • All Attacks by any component unit of the 143rd always roll a D10 regardless of what it says on the Combat Chit. The Die modifier still applies.
  • In any combat (attacking or defending), units of the 143rd may not use retreats to honor the combat spread.
  • If Sharon is in play and a unit of the 143rd draws a Combat Chit, the Israeli player may draw three instead and choose which one will be the Combat Chit for that combat.
14.4.1.4.2 Zvika Greengold

The Greengold leader counter is placed with the Zvika TF in the Available Task Forces box and always is with that unit. Should the TF be eliminated, Greengold is also eliminated. In any combat (defending or attacking), that leader Zvika's TF is involved, three Combat Chits are drawn, and the Israeli player may choose which applies to that combat. After this is done, roll a D6 and if a 1 comes up, Zvika is eliminated. Zvika is also removed when TFs are removed from play.

14.5 Arab Minor Allies

Arab Minor Allies units may be activated by any Arab HQ but only one unit may be activated per HQ activation. These units do not count towards the normal maximum limit that may be activated by an Arab HQ. These units are:

On the Sinai front: 8A/Algeria, 3A/Libya, Morocco, Sudan, Tunisia, Kuwait

[Counter art: 8A/Algeria (3, T55, BTR40); 3A/Libya (3, T55, OT62); Morocco (3, OT64); Sudan (3, BTR50); Tunisia (1, AML90); Kuwait (1).]

On the Golan front: 20M/SA, Al-Jahra/K, Cuban

[Counter art: 20M/SA (3, AML90, M3 VTT); Al-Jahra/K (3, Vickers, Saracen); Cuban (3, T55).]

14.6 Israeli Army Special Units

14.6.1 Israeli Task Forces

Israeli Task Forces appear as per the setup and reinforcement schedule. When they arrive, they are placed in the Available Task Forces box and may enter play with the spending of a replacement point during the Reinforcement/Replacement phase. These arrive at any Israeli HQ (Division or Brigade) with an LoC when they are paid for with Replacement Points. Task Forces are Independent units and only used on the Golan Front.

When eliminated, Task Forces do not return to play and are lost for the remainder of the game. On the October 10th turn, during the Reinforcement/Replacement Phase, remove all Task Forces from the game and add one Replacement point for each removed to the Israeli Replacements total.

14.6.2 424 Shaked

The 424 Shaked unit is either in two component companies (as shown by the [ ]s on the counter) or these two units can be combined, at the Israeli player's choice, into one battalion at any time they are stacked together. Once combined, they cannot be split up again. Whatever markers are on the component companies at combination are placed on the battalion marker as well (no more than one of each type of marker is placed).

15.0 Reinforcements and Replacements

15.1 Reinforcements

15.1.1 Most reinforcements arrive in Supply Source hexes during the Reinforcement and Replacements Phase of the game turn. These arrive in their nation's supply source Fresh. If there is no Supply Source in which they can be placed due to the presence of enemy units in the supply source hex, they do not arrive but are placed on the Game Turn track and may arrive whenever an eligible supply source is controlled by friendly forces once again. If there are friendly units in a supply source and an enemy unit enters the hex, place the units that were in the source in another source on the same front.

15.1.2 During the first three days, the Israelis must use the Mobilization Process marker to show the speed in which its armed forces are mobilizing. Roll a D6 and place the Mobilization Process marker on the space for the number rolled. This is the number of movement points all units arriving this turn spends from their movement allowance prior to entering play. If you roll a 6, Israeli units will not be able to move out of their reinforcement hex until next turn.

Subtract two from the number rolled on Turn 2 and subtract three from the number rolled on turn 3.

15.1.3 Aircraft Reinforcements are placed in the Available Aircraft box when they arrive as reinforcements.

The Israeli [140] aircraft is a squadron that may be created from 2 eliminated A-4 aircraft. If there are two A-4 aircraft that have been eliminated during a Reinforcement/Replacements phase, the [140] aircraft may be added to the Available Aircraft box.

15.2 Replacements

Both players start with Replacements Points marked on their Player Aid in the Replacements, Infrastructure, and Supply track. These can be increased through reinforcements and through specific game events. How these are used to satisfy combat losses has been covered (see 7.6.10, B). These Replacements can also be used during the Reinforcements and Replacements Phase of the Game Turn as follows:

The Israeli player may spend one replacement point to place a Task Force in the Task Forces Available box.

Both players may also return units from the Replacements Box by choosing one unit in the Replacements box onto the map and placing any one unit of the same size value in the Destroyed Units box. Only units of the same nationality may be used to do this. There is no Replacement Point cost to do this.

Both players may also return units from the Destroyed Units box to the game by permanently eliminating any 2 units of the same or greater size value. Only units of the same nationality may be used to do this. There is no Replacement Point cost to do this.

You may also use replacements to re-equip units. Each replacement point can replace one level of lost equipment. To receive the equipment, the unit must have a Line of Communications at the time it is activated. It must not do anything other than receive equipment. After it receives the equipment, the unit is Spent.

16.0 Additional Support Assets

These rules cover the Support Assets that were not mentioned in the combat rules (see 7.6.4). In all cases here, when you wish to use the asset, you will roll a D10 to see if the support mission was successful. In all cases in which you fail the roll, reduce the Support Asset by one. If the Support Value is at 0, no more support of that type may be offered. Support may only be used on units of the owning country of that support – or if there is a unit of that country "in the combat". You may only use one country's support for any specific use of that support.

16.1 Transport Support

Transport Support can be used to move units on the map either through ground transport (allocating trucks to units without transport to move mounted) or to fly units using Transport Aircraft or Helicopters.

16.1.1 Using Air Transport

Both sides have actual transport assets that include helicopters and Transport aircraft that can perform transport missions. These are placed in the Available for Transport box of the Air Display. Airfields must allow flight (established earlier in the turn) of these Aircraft/Helicopters but they are not assigned missions and fly from the Available for Transport box. If one of these transport support attempts are tried by a player, he must choose a transport asset to use to perform that mission. If Transport Aircraft are being used, this can only be done if there are friendly Aircraft in the Combat Air Patrol box and no enemy Aircraft in the Combat Air Patrol box on the front in which the transport is occurring. If Helicopters are being used, there is no restriction for flying if the enemy has aircraft in the Combat Air Patrol box.

If the transport asset is damaged, it is placed in the Damaged Aircraft box. If reduced, it is flipped to its reverse side and if used for another transport roll, the roll for Transport Support has one added to the die.

If the mission is 4 or fewer hexes from the nearest friendly unit, helicopters must be used. If more than 4 away, Aircraft must be used.

Egyptian Transport may be used only for Egyptian units and Syrian Transport may only be used for Syrian units.

16.1.2 Air Resupply

Any unit that would qualify for an Out of Contact marker may be resupplied by air. Roll against the Transport Supply value of nation that the Out of Contact marker is to be placed. If you pass, no marker is placed. If this is performed on the Golan map, SAM fire applies to all resupply attempts. If on the Sinai map, Israeli aircraft are only attacked with SAM fire if the Unit being resupplied is within the Egyptian SAM arc. All Egyptian attempts are subject to SAM fire. Only Aircraft Transports may perform this mission.

Transport Supply can also be used to remove Low/No Fuel markers and Low/No Ammo markers. Either Helicopters or Transport Aircraft may be used for this (within 4 hexes of a friendly would use a Helicopter and if not within 4, aircraft would have to be used). When the unit with the marker is first active during either the Activation Phase or the Reaction Phase, roll a D10 against the nationality's Transport Supply value. If you are rolling for a Low Fuel/Ammo marker, if you pass, the marker is removed. If you are removing a No Fuel/No Ammo marker, add one to your die roll to remove the marker. If you fail, reduce the Transport Supply marker by one. If this is performed on the Golan map, SAM fire applies to all resupply attempts. If on the Sinai map, Israeli aircraft are only attacked with SAM fire if within the Egyptian SAM arc. All Egyptian attempts are subject to SAM fire.

16.1.3 Air Transport Movement

Transporting units may be performed with Transport Support. Paratroops (for Israel) or Commandos (for Arabs) in an Airfield box may be transported by Transport Support and the Transport Support must be provided by the same to nationality as the transported unit. Note that only units in this box may be transported by air. Egyptian Transport may only be used for Egyptian units and Syrian Transport may only be used for Syrian units.

One Transport Aircraft or Helicopter is needed to transport one friendly unit.

Once transported from its Airfield box, a Unit can never return to the Paratroops/Commandos at Airfield box.

Choose a helicopter unit if the landing hex of the transported unit is within 4 hexes of a friendly unit; Aircraft transport if more than 4 away. If you roll equal to or less than the modified Transport Support value, you may place the transported unit on any hex on the map. If you roll more than this value, reduce your Transport Support by one and both the unit and the transport are eliminated from play. If this is performed on the Golan map, SAM fire then applies to all resupply attempts. If on the Sinai map, Israeli aircraft/helicopters are only attacked with SAM fire if within the Egyptian SAM arc. All Egyptian attempts are subject to SAM fire.

If the transport is undamaged from the SAM fire, the Unit is successfully landed, the Unit arrives Fresh. It may activate as if there was an HQ present but only one unit per activation may be made. There is no Israeli reaction movement to this activation. You cannot land in a hex with an enemy Unit (but can land in one with just an HQ) and you may land in an enemy ZOC.

If SAM fire damaged the transport asset, the unit being transported is eliminated.

16.1.4 Raids!

The Arab player may perform raids with Commandos at airbases. To do this, use an available helicopter to place a commando in the Raid box of the respective front. Note that Arab Units placed in a Raid box may never leave it. Israeli Units in Raid boxes (see below) may be removed and placed on an eligible Supply Source during a subsequent Reinforcements phase.

Arab units in a Raids box may do one of the following (add the noted modifier to their Transport Support roll):

Syrian Commandos:

  • Capture a bridge over the Jordan River (+3 on the Transport Roll). If successful, place the Spent commando unit adjacent to the bridge captured. This may only be attempted on turn one of the game.
  • Harass Israeli Reinforcements (+2 on the Transport Roll): add one to the Mobilization Process value for Israeli units entering on the Syrian front. This may be attempted on turn 1, 2 or 3 of the game.

In either case, if the Transport Support roll fails, eliminate the Syrian Commando used.

During the Place Arriving Reinforcements Phase, the Israeli player may place Activated Task Forces in the Golan Raids box. Each one added adds an additional one to Syrian Commando Transport Support rolls.

Egyptian Commandos:

  • Harass Israeli Reinforcements (+2 on the Transport Roll): add one to the Mobilization Process value for Israeli units entering on the Egyptian front.
  • Capture an Israeli Airfield (+3 on the Transport Roll): Destroy one Israeli Aircraft unit of the Arab players choice.

During the Place Arriving Reinforcements Phase, the Israeli player may place 424 Shaked Units (each counter counts as one Unit regardless of size) in the Sinai Raids box. Each 424 Shaked Unit adds 2 to Egyptian commando Transport Support rolls.

16.1.5 Ground Transport

Transport may also be used to move units without equipment (so they are moving by truck and not walking). Roll a die and if you roll equal to or less than your transport support value, the unit may move normally. Units that move this way cannot enter an enemy ZOC nor can they use Secondary Movement. They also must be in Road Column mode only (thus can only move along roads and bridges).

16.2 SSM Support

Surface-to-Surface missiles are fired during the political phase of the game turn if authorized. Only the Egyptian player may launch SSM attacks.

To launch an SSM attack, roll a D10 against your SSM value. If you fail, reduce your SSM value by one. If you succeed, roll a D6 and add that many Victory Points to the Egyptian total.

16.3 Nuclear Weapons Support

Only the Israeli player may launch Nuclear attacks if authorized by the Politics table. To do so, Israeli must have a Nuclear armed F-4 on his Air Display. Only one Nuclear attack may be launched by Israel in the game.

See 10.3.5 for additional information on the effects of nuclear weapons.

16.4 Engineer Support

Engineering Support may be used for the following. If any attempt to use Engineering Support fails, reduce the Engineering Support value on the Player Aid by one. Once the value is at 0, no more Engineering Support may be attempted. For the Arabs, only Egyptian Engineer Support is used on the Sinai front and only Syrian Engineer Support can be used on the Golan front. Israeli Engineer support may be used on either map.

16.4.1 Repairing Airfields – roll a D10 against your Support and if you roll the modified Engineering Support value or less, the airfield is repaired. This is performed during the Reinforcements and Replacements Phase of the game turn. Egyptian Engineer Support may only be used on Egyptian Airfields and Syrian Support may only be used on Syrian Airfields. Provided each Engineer Support roll is successful, multiple airfields may be repaired in one turn

16.4.2 River/Canal/Wadi/Anti-Tank Ditch when a unit of a nation attempts to move over a river, wadi, Anti-Tank Ditch, or canal, roll a D10 and should you roll your Support Value or less, there is no additional movement cost to cross the minor river or canal. If you are moving into an enemy ZOC when crossing the river or canal, add 2 to your roll. Only one attempt to provide this support may be made when the unit is attempting to cross the river or canal. Provided each Engineer Support roll is successful, a Unit may cross multiple obstacles in a single move.

16.4.3 Crossing the Suez Canal requires an Engineer Support roll. See 19.0 for more information.

17.0 Politics

There's no question that international politics played a key role in the outcome of the 1973 War. This rule covers the changes that occurred as the war was fought and the ways the game can end. During the Political Phase of the game turn, both players look at the Politics track on the General Game Display. The track goes from 0-9 and can change as game events occur. The scenario being played will give you the award schedule for political events. The Politics rule is only used in the Campaign Game.

The Arab Player may parade his POWs to add to the track before the roll (see below).

First the Arab player, then the Israeli player may decide to roll a D10 to see if a political event occurs. If that player rolls the number the politics marker is on the track or less, the next political event for that player occurs. If he fails the roll, the opposing player automatically has his next event occur. After the roll, the Political marker returns to 0.

Events go in order and the previous event must have occurred to allow the next one to occur.

Political points are awarded by Events that occur during play (as listed in the Campaign Game reinforcement schedule) or by the value of amassed Victory Point totals.

In addition, the Arab player may accumulate POW points. If an Israeli unit is eliminated, add one POW point to the POW track. There is a maximum value of 6 to the POW points. Before the Politics roll is made, the Arab player may parade his POW points. rent POW value, add 3 Victory Points to the Egyptian total. If you roll over the value, add 3 Victory Points to the Israeli total. Regardless of the die result, two are added to the Politics track, and the POW Points are reduced to 0.

Israeli Events:

  1. Israeli may arm a F-4 with a Nuclear Bomb: The Israeli player must place an F-4 from his Available Aircraft box in the Nuclear Preparation box. This aircraft is not available for use in the game. Add the Nuclear Weapons marker to the Israeli Player Aid sheet on the "1" space.
  2. El Al Resupply Flights occur. Add 6 replacement points to the Israeli total.
  3. Nickle Grass Begins. See below for all the effects of Nickle Grass.
  4. Strategic Airstrikes against Damascus are executed. The Israeli player rolls a D6 and gains that number of Victory Points
  5. US goes to Defcon 3 – no game effect but things are getting real.
  6. UN Ceasefire Ordered. If this is the first ceasefire, the battle on Golan Front has ended. In addition, first the Arab player, then the Israeli player may decline the ceasefire. The player that first declines gives a D6 worth of Victory Points to his opponent; either the Israeli or Egyptian total. If this is the second Ceasefire (the Arab one has also occurred), the game ends; determine the winner.
  7. US Intervenes – place the 5 USN aircraft on the Israeli Available Aircraft display. The Israeli player may use these normally.
  8. Israeli government gives authorization to launch a Nuclear Strike. Move the F-4 that was in the Nuclear Preparation box on the Air Display to the Nuclear Armed box. The Israeli player may launch one nuclear strike.

Arab Events:

  1. Soviet Resupply Begins. Add 6 replacement points to the Egyptian total and add 8 replacement points to the Syrian total. Increase Egyptian SAM value by 1 and the Syrian SAM value by 2.
  2. Soviet Ship Ilya Mechnikov is sunk by the Israeli Navy. No game effect but things are getting real.
  3. Egyptian strategic SSM Attack. Attempt an SSM strike against the SSM support value. If successful, roll a D6 and add that number of Victory Points to the Egyptian total. Add the Libya and Morocco Aircraft to the Available Aircraft box on the Sinai Front.
  4. Soviet SA-6s are deployed in and around Damascus. Add 1 to the Syrian SAM total. Assad is relieved by Abrash. Add the four Algerian Aircraft to the Available Aircraft box on the Sinai Front.
  5. Add the East German Aircraft to the Sinai Available Planes box. The East German aircraft unit is added to the Egyptian Air Display and may be used normally.
  6. UN Ceasefire Ordered. If this is the first ceasefire, the battle on Golan Front has ended. In addition, first the Israeli player, then the Arab player may decline the ceasefire. The player that first declines gives a D6 worth of Victory Points to his opponent; either the Israeli or Egyptian total. The Player that first declines gives D6 worth of Victory Points to his opponent. If this is the second Ceasefire (the Israeli one has also occurred), the game ends and determine the winner.
  7. The Egyptian player may activate all the units of the Egyptian 1st Army. Sadat must assume command if he hasn't already. Place all 1st Army Units in any eligible Egyptian Supply Source hex.
  8. Soviet 7th Guards, 31st Guards and 103rd Guards are flown to Egypt and Syria – the game ends and the winner is determined.

When Nickle Grass begins, the following take place:

  • Add 2 to the Israeli Artillery Support value
  • Add 6 Replacements to the Israeli Replacement Value
  • All RAW Israeli SAM Support values are +1, all RAW Arab Values are -1
  • Add a total of 7 Infrastructure points divided as the Israeli player wishes between the Golan and Sinai fronts.

18.0 Mount Hermon Observation Post

If the Israeli player has a friendly unit on the Mount Hermon OP hex (07.11 on the Golan map), the Israeli player may reroll any Syrian die roll after seeing the roll. If there is a Poor Syrian Leader present allowing for an Israeli reroll of a Syrian Combat roll, the Israeli may ask for two re-rolls after seeing the results of each roll.

Suez Canal Crossing Examples (figure on the map page)

  1. Per 19.2.1.1 using Boats to cross requires an Elite unit (either with an at-start star or an Elite marker) that has no Equipment (whether it began that way or chose to eliminate all of its Equipment). Upon entry of the hex the Israeli player places the Boats marker on the Spent Israeli Unit and flips the Boats marker to its Deployed side. In a later activation when the Elite unit is again Fresh, it uses the Boats marker to cross (gold arrow), spending all of its movement points to do so. The boats remain in the original hex. An Engineering Support roll is not required for this crossing.
  2. Per 19.2.1.2 once a Uniflote or Roller Bridge and its towing tank battalion move adjacent to a canal hex (white arrow) both may be flipped to their Spent / Deployed sides, pointing the bridge across the desired hex-side. For the Roller Bridge (only), an Engineer Support roll is required, failure of which eliminates the Roller Bridge from play. Once a Uniflote or Roller bridge is successfully deployed, any otherwise eligible Israeli unit may move across it as if an emplaced bridge were present (gold arrow).
  3. Per 19.1 the Egyptian player can place a bridge (or decoy) in any hex adjoining the Suez Canal that contains a 2nd (green stripe) or 3rd (dark blue stripe) Unit. This is accomplished via a roll against the Egyptian Engineer Support value. Failure of this roll results in the support value dropping by one. Note that the Unit in the hex is not Spent by this attempt, regardless of success or failure. Once emplaced, any otherwise eligible Arab unit may cross as if an emplaced bridge were present (gold arrow).
  4. Per 19.2.1.3 when the Timsach is moved adjacent to the Canal, it may flip to its deployed side (white arrow). In a subsequent Activation a single Israeli unit may use the deployed Timsach to cross the canal (gold arrow) per turn. Following each crossing a D10 roll is made against the Israeli Engineer Support value, failure of which eliminates the Timsach.

19.0 The Suez Canal

The dominating terrain in the 1973 war was without a doubt, the Suez Canal. Both sides spent years attempting to find a solution to that seemingly insurmountable canal. Both sides have different approaches to successfully crossing the canals – the way the Egyptians and Israelis performed the feat is offered by the rules here. Each side has completely different rules that apply to each.

19.1 The Egyptian Crossing of the Suez

The Egyptian player has 5 bridges and 3 decoys they can build. The Egyptian player may choose to place a bridge or a decoy on any hex with an Egyptian unit of the 2nd or 3rd Army (green or dark blue stripe, respectively). To place, roll a D10 against his Engineer Support and if successful, place the bridge or decoy unit on the friendly unit facing the hex-side that will be bridged. The placement of a Bridge or a Decoy is up to the Egyptian player and kept secret from the Israeli player. The Egyptian player decided whether a Bridge or Decoy is to be placed before rolling for placement. If the Engineer Support roll fails, reduce the Engineer Support value by one and no bridge is placed.

A Bridge placed creates a bridge and a connecting road from the east side of the canal to the west side and can be immediately used by the Egyptian Player. When bridge placement is performed is mandated by the special rules of the scenario in play.

The Israeli player may destroy a bridge if they move adjacent to the hex-side the bridge faces with an active unit if they so wish. They may also use the bridge if they wish. If it is a Decoy, remove the Decoy marker the moment an active Israeli unit is adjacent to the hex-side to which the marker faces.

19.2 Israeli Crossing of the Suez

The Israeli player may cross the Suez Canal using bridge assets or cross the Red Sea by Amphibious Invasion (See 19.2.2; planned but never used). No crossing may occur until the 13-October turn.

19.2.1 Using Bridge Assets To Cross the Canal

The Israeli Army has several different assets they can use to cross the canal. Each works a little differently and can allow use by different types of forces.

19.2.1.1 Boats

Boats are kept off board in the Amphibious Box on the Israeli Player Display. Boats allow Israeli Elite units without any equipment to cross a canal hex-side. If the Elite unit is active and adjacent to the Canal, the Israeli player may place the boat marker on the Israeli unit. It stays Fresh after this but may move no farther this activation. Point the top of the Boats marker towards a Suez Canal hex-side and flip it over to its Deployed side. It may not move again. The Israeli unit stacked with the Boats, if activated again, may spend all of its movement points to cross the canal – this time it is Spent after this movement. The Boats counter remains in the origin hex. Any Israeli Elite unit without equipment may use the boats to cross the canal as long as it starts fresh on the Boats marker. Either the hex moved into or from cannot be in an Arab Zone of Control.

If the Arab player places a combat chit on the hex that has the unit and boats in the hex, the boats are eliminated (regardless of the combat result).

19.2.1.2 Uniflote and The Roller Bridge

These both work in basically the same way but with a few exceptions.

The Israeli player may place either or both of these units on any full-strength Tank Battalion (one Tank Battalion is required for the Uniflote and one is required for the Roller Bridge), that is no more than 6 hexes from a Suez Canal hex-side. The Tank unit may move normally but may not be "In a Combat" in any way and may not perform Secondary Movement. It is towing its respective bridge. Once the tank unit is adjacent to a Suez hex-side, flip it and the bridge marker over to their deployed side and face the top of the counter toward a Suez Canal hex-side. The bridge may not move again. With both types of bridges, an Israeli unit may freely move over the bridge asset as an emplaced bridge.

For a Roller Bridge, roll an Engineer Support roll to place the bridge. If the roll fails, the bridge is not placed and removed from play.

No roll is required for the Uniflote to be placed.

In both cases, if either type of Bridge unit is in an Arab Zone of Control, it is eliminated from play.

19.2.1.3 Timsach

This is a Gillois Amphibious Tank Carrier. It is placed within 8 hexes of any Suez Canal hex-side during any Reinforcement/Replacement phase the Israeli player wishes. This unit moves like a normal unit. If the Arab player places a combat chit on the hex containing the Timsach, the Timsach is eliminated (regardless of the combat result).

Once it has moved adjacent to a Suez Canal hex-side and completed its activation, face the top of the unit towards a Suez Canal hex-side and flip it over. It may not move again. In a subsequent activation, one Israeli unit may use it to cross the Suez Canal hex-side it is facing as if it was a bridge. It may do this regardless of enemy ZOCs. After use, roll a D10 and see if the value is equal to or less than the current Israeli Engineer Support value. If greater, remove the Timsach from play. If the roll is equal to less than the current Engineer value, the Timsach stays in the hex and may be used once per turn for any Israeli unit to cross the canal at that hex-side. The first use would count as that day's use.

19.2.2 Israeli Amphibious Assault.

Planned but not attempted as the Deversoir attack was a success, this came close to happening if the Israelis were defeated at Chinese Farm.

On any Reinforcement/Replacement Phase, the Israeli player may place any of the following units in his Suez Amphibious Forces box on his Player Display:

  • 890P
  • 88AmR
  • 225A
  • TF Ayalon

On the next turn following this placement, the Israeli player may roll against his Engineer Support value and, if passed, he may place the above units on any hex adjacent to the Red Sea that is not occupied by an Arab Unit nor a supply source. They are placed Fresh. These units must still trace supply normally (remember Air Supply though).

20.0 Miscellaneous Rules and Units

20.1 Bar-Lev and Outpost Garrisons

At the start of all scenarios that begin with the start of the war, the Israeli player should put all of the Bar-Lev garrison in a mug so they can be drawn for placement. The Israeli player will then draw a unit (without looking at it) and place it on one of the Bar-Lev marked hexes. After this is done, the Israeli player may inspect which Bar-Lev hexes have units and which are empty. The Arab player is not told what is in each hex. There will be a few units left over and these are placed to the side.

He then does the same for all the Outpost units and places those the same way.

All of these units are revealed when the Arab player places a combat chit on the hex. Until then, it is assumed that all forts are occupied with a 0 size unit. There is one Bar-Lev garrison that has 1 step. All the rest have 0 steps (or are empty). If the Israeli player wishes, he may reveal the one size unit and force the Arab player to pay one movement point to enter its ZOC. While unrevealed, all units have no ZOC and cannot be active. They are all assumed to be spent and are immobile.

20.2 Israeli Remnant Units

In scenarios 2, 6 and 8, the Israeli player starts with 2 Remnant units in the Replacements box. These units may be used with other 0 (or greater) sized units to bring on the map via the procedure in 15.2. Note that only the size matters for bringing in units from the Replacements or Destroyed Units box. For example, two (or three, if in the Destroyed box) Outposts can bring in one remnant.

20.3 Situational Unit Activations

20.3.1 Arab Activations

If an Israeli unit enters a hex within 4 hexes of 16.30 during play, the Arab player may immediately place all Jordanian Units that are in the counter mix but have not entered play on hex 16.30. These units are fresh when placed. Any Jordanian aircraft that have not entered play are also placed in the Available Aircraft box on the Golan Front at the same time.

If an Israeli unit enters a hex within 4 hexes of 24.01 during play, the Arab player may immediately place all Iraqi Units that are in the counter mix but have not entered play on hex 24.01. These units are fresh when placed. Any Iraqi aircraft that have not entered play are also placed in the Available Aircraft box on the Golan Front at the same time.

If an Israeli unit enters a hex south of the city of Suez (hex 18.37) and on the east side of the Suez Canal, the Arab player may immediately place all Units of the Red Sea Army that are in the counter mix but have not entered play on hex 11.43 and/or 15.43. These units are fresh when placed.

If an Israeli unit enters a hex within 4 hexes of any Arab Supply Source on the Sinai map during play, the Arab player may immediately place all Egyptian 1st Army Units that are in the counter mix but have not entered play any Egyptian Sinai Supply Source hexes he wishes. These units are fresh when placed.

20.3.2 Israeli Activations

Several Israeli Units are placed, per the scenario instructions in the Israeli Garrisons, Jordan River Bridges box on the Golan map. These units are moved from the box to the map if an Arab unit enters a hex within 2 hexes of a Bridge hex on the Golan map. One Israeli unit is placed for each bridge that the Arab player enters within range. These units may enter play if no Arab Units remain in the Israeli Golan Heights. When they enter play, they are placed adjacent to the bridge hexside (Israeli Player choice of hexes)

Several Israeli Units are placed, per the scenario instructions in the West Bank Garrison box on the Israeli Player Aid. These units were guarding the West Bank in case Jordan invaded into the West Bank. These units are released per the scenario instructions (historically when Israeli felt comfortable that Jordan would not invade the West Bank). The Israeli player can also take units from this box before that if he pays 2 Victory Points and 1 Political Point for each unit taken.

These units may arrive on either the Golan Map or the Sinai Map on any Israeli Supply Source during the next Reinforcement Phase.

Note: Section 21.0 (Game Credits) and the Section 22.0 bibliography are omitted from this transcription; they contain attribution and a reference list, not rules.

23.0 Clarifications and Corrections

279R: Secondary Equipment is a Sho't Kal

The Israeli Northern HQ should be a Corps HQ (have three Xs)

There is an extra Arab SAM Support marker on Sheet 3 that you won't need. You'll just need the Egyptian one (also on sheet 3) and the Syrian one (on sheet 2).

Official Errata (15 November 2023)

The publisher's official errata sheet dated 15 November 2023 (Compass Games, "Test of Faith Errata") is folded in here as a separate section. The printed rules above are left as published; the corrections below supersede them. The sheet's "Scenario Book Errata" block applies to the separate Scenario Booklet and is not transcribed here.

Rulebook Errata

  • Bridges are placed during the Supply and Infrastructure Phase of the game turn. If it is the first turn, the Arab player may attempt to roll for their bridges at the start of play.
  • Artillery Support clarification: IDF Artillery Support comes from Brigades for the IDF and from Divisions for the Arabs.
  • Random Events Table (Page 20): If the player did not commit the atrocity, he should subtract one from his politics roll (not add one).
  • 7.6.4.3 – Hull Down is unclear. If you take a Ammo low marker, remove 1 step of Arab armor from all Units in the combat. If you take an Ammo out marker, remove 2 steps of Arab armor.
  • 7.2 – Should be up to 4 may activate for Eitan and up to 6 may activate for Bar-Lev.
  • 14.4.1.2 – It should be the Abrash removes Arab markers – not IDF ones.
  • 15.1.4 (missing rule) – Some Israeli units are marked "Attrition" on the reinforcement schedule. These units were rushed to the front without transport. Roll a D6. If you roll a 1, a -1 Primary Equipment marker is placed on the unit (this loss is recoverable; see 7.12).
  • 17.0 Politics – Event 3 (Arab) – the Moroccan, Sudanese, Tunisian, and Kuwaiti Units also arrive.
  • 3.13 Sequence of Play
  • 3.14 Victory
  • 7.6.4.5: Unit Equipment
  • 7.6.4.6 Artillery Support
    • 7.6.4.7 (Air-to-) Ground Support
  • 7.6.5 Random Events
  • 7.6.6 Combat Die Rolls
  • 7.6.7 Apply Modifiers
  • 7.6.8 Check for Unit Quality
  • 7.6.9 Determine Winner and Combat Spread
  • 7.6.10 Take Losses
  • 7.7 After Combat Loss Segment
  • 7.8 Check Stacking Segment
  • 7.9 HQ Movement and Refresh Segment
  • 7.10 Bivouac
  • 7.11 Night Battle
  • 7.12 Israeli Tank Recovery
  • 7.13 Unit Status
  • 8.4 Time Phase
  • 14.5 Arab Minor Allies
  • 14.6 Israeli Army Special Units
    • 14.6.1 Israeli Task Forces
    • 14.6.2 424 Shaked
  • 15.0 Reinforcements and Replacements
    • 15.1 Reinforcements
    • 15.2 Replacements
  • ID: Infantry Division
  • In the Combat: All units that are attacking or are supporting a particular combat
  • Ind: Independent
  • Independent Unit: a unit with no stripe on the counter
  • JAD: Jordanian Armored Division
  • JAF: Jordanian Air Force
  • K: Kuwait
  • LOC: Line of Communications
  • M: Mechanized
  • Nammer: Leopard in Israeli
  • P: Parachute
  • PG: Presidential Guard
  • R: Reconnaissance
  • Reg: Regular
  • S Matkal: Sayeret Matkal (special forces reconnaissance in Israeli)
  • SA: Saudi Arabian
  • SAAF: Saudi Arabian Air Force
  • Segoz: Nut in Israeli
  • SF: Special Forces
  • Shaked: Almond in Israeli
  • T: Tank
  • TF: Task Force
  • UI: Unidentified Unit
  • ZOC: Zone of Control
  • 7.6.11
  • Exploitation Movement (7.6.12)
  • Clean up (7.6.13)
  • Flip a Suppressed SAM marker to its Unsuppressed side. Recompute SAM Support Value.
    1During the Activation Phase, either player may spend Supply to remove a Low Ammo or Low Fuel marker from a unit that has an LOC.
    2During the Activation Phase, either player may spend Supply to remove a No Ammo or No Fuel marker from a unit that has an LOC.
    Aircraft with Air-to-Ground ability
  • Poor Leader: A unit with this marker allows the opposing player to reroll your dice in any combat. If the enemy has a Great Leader in the combat, the opposing player could reroll his and his opponent's dice. Rerolling is optional. Only one Great or one Poor Leader would apply to each side in a combat (the player drawing the marker may choose which will be used if either or both or present on either or both sides). A Poor Leader marker is only removed when the unit so marked is eliminated (in which case all markers with the unit are removed). Place the marker back in the cup if it is removed in these ways.
  • C & C Breakdown (command and control has broken down): A unit with this marker is marked "Out of Contact" and all of the effects of that marker are now in force. Return the C & C Breakdown marker back to the Cup of Snafu.
  • Low Morale marker is placed on a unit that has routed when the routed marker has been removed from the unit, or suffers a Key Leader Casualty. See 13.1.2 for more details.
  • Elite markers are placed on units in which a 10 (if on a 10 sided die) or a 6 (if on a six-sided die) is rolled in combat. Some units in the game can begin the game as elite as well. These units are treated as if they have the same marker on them.
  • Poor markers are placed on units in which a 1 is rolled in combat. Some units in the game can begin the game as poor as well. These units are treated as if they have the same marker on them.
  • Out of Contact markers are placed on units that do not have a Line of Communications during the Communications Phase of the game turn or if the Key Leader Casualty Snafu marker is drawn from the Cup of Snafu. These markers are only removed if the unit has a Line of Communications in the next Communications Phase. Fresh units with an Out of Contact marker may move one hex if active but become spent after that. See 3.4.4 for additional information.
  • Hull Down markers - Israel only (see 7.6.4.3).