RulesPal
Chat
Rulebook
Taierzhuang thumbnail

Taierzhuang

Taierzhuang Rulebook

Table of Contents

Table of Contents

  • Stalin's First Victory (1929)
    • 1.0 Introduction
      • 1.1 Scale
      • 1.2 Sides
      • 1.3 Map Directions
    • 2.0 Components
      • 2.1 Map
      • 2.2 Counters
      • 2.3 Combat Units
      • 2.3.1 Unit Color Schemes & Abbreviations
      • 2.3.2 Higher-Level Organizations
      • 2.3.3 Organizational Size
      • 2.3.4 Unit Types
      • 2.3.5 Attack & Defense Factors
      • 2.3.6 Movement Factors
      • 2.3.7 Step Strength
      • 2.4 Markers
    • 3.0 Set Up & Hex Control
      • 3.1 Initial Marker Placement
      • 3.2 Chinese Set Up
      • 3.3 Soviet Set Up
      • 3.4 Initial Hex Control
    • 4.0 How to Win
      • 4.1 Soviet Victory
      • 4.2 Chinese Victory
      • 4.3 Soviet Victory Points
    • 5.0 Turn Sequence & Reinforcements
      • 5.1 Turn Sequence
      • 5.2 Move/Fight or Fight/Move Sequence
      • 5.3 Chinese Reinforcements
      • 5.3.1 Chinese Reinforcements & Solitaire Play
      • 5.4 Ending GTs
    • 6.0 Stacking
      • 6.1 Stacking Limits
      • 6.2 Soviet Stacking
      • 6.3 Chinese Stacking
      • 6.4 Fog of War
    • 7.0 Zones of Control (ZOC)
      • 7.1 Enemy Zones of Control (EZOC) & Movement
      • 7.2 EZOC & Advance After Combat
    • 8.0 Movement
      • 8.1 Stack Movement
      • 8.2 No Minimum Movement Ability
      • 8.3 Soviet Armored Train Group (ATG)
      • 8.4 Road Movement
      • 8.5 River Hexsides
      • 8.6 Other Terrain
      • 8.7 Territorial Restrictions
    • 9.0 Combat
      • 9.1 Combat Procedure
      • 9.2 Soviet Heavy Artillery
      • 9.3 Column Shifts
      • 9.4 Concentric Attack
      • 9.5 Soviet Divisional Integrity Bonus
      • 9.6 Final Combat Resolution
      • 9.7 Advance-After-Combat
  • The Battle of Taierzhuang (1938)
    • 1.0 Introduction
      • 1.1 Scale
      • 1.2 Sides
      • 1.3 Map Directions
    • 2.0 Components
      • 2.1 The Map
      • 2.2 Counters
      • 2.3 Combat Units
      • 2.3.1 Unit Color Schemes & Abbreviations
      • 2.3.2 Higher-Level Organizations
      • 2.3.3 Organizational Size
      • 2.3.4 Unit Types

Stalin's First Victory (1929)

1.0 Introduction

This game includes two separate and distinct battles. Both battles use many of the same rules and concepts, however for ease of play, the rules are separated into two distinct rule sets. The first set of rules cover Stalin's First Victory and the second The Battle of Taierzhuang. Both games are low complexity two-player grand tactical games.

Stalin's First Victory (SFV): Covers the five-day campaign that determined the outcome of the 1929 Sino-Soviet War.

1.1 Scale

Each hex on the map represents 1.25 miles or 2 km. Each game turn (GT) represents one day. Units of maneuver are battalions, companies, and regiments.

1.2 Sides

One player commands the Soviet forces, the other commands the Chinese forces.

1.3 Map Directions

The compass rose shown on the map indicates magnetic north. For all game purposes:

  • The north map edge consists of the row of hexes from 1701–1725 inclusive.
  • The south map edge consists of hexes 0101–0125 inclusive.
  • The west map edge consists of hexes 0201–1601 inclusive.
  • The east map edge consists of hexes 0224–1624 inclusive.

2.0 Components

Stalin's First Victory consists of the first section of this rule booklet and the Stalin's First Victory portion of the 22×34-inch game map, including the SFV Terrain Effects Chart, Soviet Victory Points Track, SFV Terrain Key, SFV Turn Record Track and Combat Results Table. The game also includes 48 5/8-inch counters (upper right side of counter sheet). Players must provide one six-sided die to resolve combat and other random game events.

2.1 Map

The map shows the militarily significant terrain in and around the area of the Sino-Soviet border where this campaign was fought in. The hexagonal (hex) grid printed over it regulates the placement and movement of units.

  • A unit may be in only one hex at any one time.
  • Each hex contains natural and/or manmade features that affect movement and combat.
  • Each hex on the map has a unique four-digit identification number printed within it.

Example: The town of Dalainor is in hex 0318.

2.2 Counters

There are two basic types of counters: combat units and markers.

  • Combat units represent the combat formations that existed at the time.
  • Markers allow players to note the specific status of a hex or unit(s) and function as memory aids.
  • After reading these rules at least once, carefully punch out the counters. Trimming off the dog ears from their corners with a fingernail clipper will facilitate easier handling and stacking during play and enhances their appearance.

2.3 Combat Units

Each combat unit counter displays specific types of information: nationality, historic identification, unit type, organizational size, number of steps, combat, and movement factors.

The counter diagram labels the unit size symbol, number of steps, unit type symbol, organizational ID, unit ID, attack factor, movement factor and defense factor.

Important: The number of steps is not shown on Chinese units. All Chinese units are one-step units.

2.3.1 Unit Color Schemes & Abbreviations

The color of the counters denotes the side or nationality to which the counter belongs.

Soviet Units

  • 18: 18th Rifle Corps (Black on Red)
  • 35: 35th Rifle Division (Black on Dark Orange)
  • 21: 21st Rifle Division (Black on Light Orange)
  • 36: 36th Rifle Division (Black on Tan)

Chinese Units

  • 2: 2nd Fengtien Army (White on Gray)
  • 17: 17th Brigade (White on Light Blue)
  • 15: 15th Brigade (White on Green)

Counter Abbreviations

  • A: Artillery
  • ATG: Armored Train Group
  • B: Buryat Mongol
  • H: Howitzer
  • TC: Tersk Cossack

2.3.2 Higher-Level Organizations

The designation to the left of the unit type symbol is the unit's higher-level affiliation. The numbers to the right of a unit type symbol are the specific identification for that unit.

  • The Soviet forces are divided into four higher-level organizational commands (2.3.1).
  • Chinese forces are divided into three higher-level organizational commands (2.3.1).

Important: Higher-level command affiliation affects the ability of units to stack together and/or conduct combat together.

2.3.3 Organizational Size

The organizational sizes of the units are shown using the following symbols at the top of each counter.

  • X: Brigade
  • II: Battalion
  • III: Regiment
  • I: Company

2.3.4 Unit Types

There are seven types of units in the game:

  • Artillery
  • Infantry (Soviet Rifle)
  • Heavy Artillery
  • Tank
  • Cavalry
  • Armored Train
  • Combat Engineer

2.3.5 Attack & Defense Factors

Attack and defense factors (together known as combat factors) serve as measures of each unit's ability to engage enemy formations in combat (9.0).

2.3.6 Movement Factors

A unit's movement factor is the measure of the unit's ability to move across the hex grid printed over the map. Units pay various costs from their movement factor to enter different types of hexes, depending on the terrain in each hex, and any water along the hexsides around them, and the moving unit's mobility class.

2.3.7 Step Strength

The term "step" is a common term used to express the ability of a unit to absorb a certain amount of combat losses before ceasing to be an effective formation. Those units with combat factors printed on only one side of their counters are "one-step" units; all Chinese units are one-step. Soviet units with printing on both sides of their counters are "two-step" units.

  • Each Soviet unit's current step strength is shown by the number in the upper left corner of the counter.
  • If a Soviet two-unit step [printed as "two-unit step" in the source; read as "two-step unit"] suffers a step loss, it is flipped over so its one-step side shows.
  • If a one-step unit, or a former two-step unit that has already been reduced in strength, suffers a step loss, it is removed from the map (eliminated).
  • Eliminated units from either side cannot return to play. Reduced units may not be returned to full strength.
  • All two-step Soviet units begin play at their full step-strength.

2.4 Markers

The counter-mix includes the following informational memory aid markers. Their uses are explained in appropriate sections of the rules:

  • Soviet Victory Hex Control (4.0)
  • Game Turn (5.0)
  • Soviet Victory Points (4.0)
  • Rail Cut Marker (8.3)

3.0 Set Up & Hex Control

After first deciding who will command which side, both players should sort and set up the units of their own side as well as the markers according to the following instructions. All stacking rules are in effect during set up for both sides (6.0).

3.1 Initial Marker Placement

Set aside, within easy reach of both players, all the hex-control markers.

  • Place the turn marker on the SFV Turn Record Track (TRT) in the Turn 1 16 Nov. 1929 box.
  • Place the two victory point markers on the SFV Soviet Victory Points Track in the zero box.
  • Place the rail cut marker face up in hex 1207.

3.2 Chinese Set Up

The Chinese player sets up first.

  • Place all seven units of the 2nd Fengtien Army off to the side of the map.
  • Place the six units of the 15th Brigade as follows:
    1. In any hex in the city of Manchouli (hexes 1206, 1207, or 1107), or;
    2. In any hex not in the Soviet Union or Mongolia that is within seven hexes of the above city hexes. Do not count the city hex but do count the hex of placement.
  • Place the six units of the 17th Brigade in or adjacent to Dalainor (hex 0318) and/or Tsagan (hex 0123).

3.3 Soviet Set Up

The Soviet player sets up second.

  • Place all 16 Soviet units in any hex in the Soviet Union and/or Mongolia. Units may be set up in enemy zones of control (EZOC) (7.0).

3.4 Initial Hex Control

At the start of play, the Chinese player controls all hexes inside China. The Soviet player controls all hexes in the Soviet Union and Mongolia.

  • The control status of a hex changes from one side to the other each time a unit of the opposing side moves into it.
  • The projection of a zone of control (ZOC) into a hex does not cause control of a hex to change (7.0).
  • The control status of most hexes on the map is not important; however, nine hexes may count for Soviet victory points (4.0).

4.0 How to Win

The Soviet player begins the game on the offensive, fighting to win by capturing all six Chinese town hexes and all three numbered hill hexes (hexes 0707, 1110, and 1012) prior to the end of GT 5.

  • The Chinese player may win by preventing the capture of any one of the above hexes with his two brigades that start the game on the map (the player must keep the 2nd Army off-map to win in this manner).
  • Alternatively, the Chinese player may decide on a more operationally aggressive stance by introducing the 2nd Army into play. In this case the Chinese player can only win by meeting the conditions in 4.2.

4.1 Soviet Victory

The Soviet player wins the game if, at the end of GT 5, the Soviet player has a total of nine or more Victory Points (VPs).

4.2 Chinese Victory

The Chinese player wins the game if, at the end of GT 5, the Soviet player has fewer than nine VPs.

4.3 Soviet Victory Points

The Soviet player is awarded VPs for the following:

  • +1: Each time a VP hex (4.0) becomes Soviet-controlled.

  • -1: Each time a Soviet-controlled VP hex becomes Chinese-controlled.

  • +1: For each eliminated 2nd Army unit.

  • VP hexes may be added or subtracted from the Soviet total any number of times during a game.

  • VPs are added or subtracted from the Soviet total the instant a condition is met.

  • The Soviet player tracks the total VP by moving the VP markers along the track (left or right) as VP are awarded.

Important: The Chinese player is not required to bring the 2nd Army into play (5.3).

Designer's Note: In the event, the Chinese commander chose to follow the number one dictum of the "Warlord Era." That is: no matter what is at stake, preserve your own forces. He therefore held back entering the 2FA and, after the Soviets took a day to regroup and then began a further advance, he simply retreated away from them.

5.0 Turn Sequence & Reinforcements

GTs are divided into two player turns, one Soviet and one Chinese, which taken together comprise a variably sequenced series of steps or phases.

  • Each full sequence of phases (5.1) makes up one GT.
  • Each game of Stalin's First Victory is comprised of five GTs.
  • Players must conduct each player's turn and each phase within a player's turn in the order given.
  • Every action taken by a player must be conducted during the appropriate part of the sequence.
  • The player conducting a player turn is the phasing player, the other player is the non-phasing player.
  • Once a player has finished a phase or an activity within a phase, the player may not go back to perform a forgotten action or redo a poorly executed one unless his opponent permits it.

5.1 Turn Sequence

The GT sequence is given below in outline. The rest of the rules are organized, as much as possible, to explain things in the order they are encountered.

Soviet Player Turn

  1. Soviet Sequence Declaration Phase (5.2)
  2. Soviet Movement or Combat Phase (8.0 & 9.0)
  3. Soviet Combat or Movement Phase (8.0 & 9.0)

Chinese Player Turn

  1. Chinese Sequence Declaration Phase (5.2)
  2. Chinese Movement or Combat Phase (8.0 & 9.0)
  3. Chinese Combat or Movement Phase (8.0 & 9.0)
  4. Chinese Reinforcement Phase (skip on GT 5) (5.3)

5.2 Move/Fight or Fight/Move Sequence

During the Sequence Declaration Phase, the phasing player must declare the order in which he will conduct the Movement and Combat Phases.

  • Each player may choose either to conduct a Movement Phase then a Combat Phase, or a Combat Phase and then a Movement Phase.
  • No matter which phase order a player chooses, all friendly units on the map may participate to the limit of their normal capabilities in each phase.
  • A player may not choose one order for some friendly units and another for other friendly units. All friendly units must conduct the Combat and Movement Phases in the order declared.
  • There is no inherent advantage or disadvantage in either sequence. That is, there are no automatic combat or movement penalties or bonuses for either player in either phase sequence.

Exception: Soviet heavy artillery units (9.2).

5.3 Chinese Reinforcements

During the Chinese Reinforcement Phase of GT 1 through 4, the Chinese player may choose to receive the seven units of the Chinese 2nd Army.

  • There is no requirement for the Chinese player to receive these units. It is entirely at the Chinese player's discretion.
  • If the player decides to take the reinforcements, all units of this formation must arrive on the same GT. They cannot be split up between successive GTs.
  • During the Reinforcement Phase that the Chinese player declares that the 2nd Army will enter the map, the player must place all seven units on any non-Soviet occupied west map edge hexes from 0201–1201 (inclusive).
  • The units cannot be placed in such a way that they would exceed the Chinese stacking limits (6.3).
  • Units may be placed in an EZOC (7.0).
  • Reinforcements may not move after placement, until the ensuing Chinese player turn, at which time they operate normally.

Designer's Note: The Chinese player is not forced to bring the 2nd Fengtien Army into play. If he refrains from doing so, that means the Soviet player must gain control of all nine VP hexes on the map to win (the historical outcome). Note: that the 15th and 17th Brigades make for a meager defense against a skilled Soviet player. If the Chinese commander enters the 2nd Army into play it will give him the force needed to maintain control of at least one of the VP hexes. At the same time, though, each of those units eliminated will give the Soviet player a VP. So, the Chinese player must skillfully assess his command capabilities in relation to those of his opponent and make his judgements accordingly.

5.3.1 Chinese Reinforcements & Solitaire Play

If playing the game solitaire, the player should roll 1d6 during each Chinese Reinforcement Phase. On GT 1, if the DR is a one or two, the 2nd Army enters play (5.3). On subsequent GTs (two through four) if the DR is one, the 2nd Army enters play.

5.4 Ending GTs

GTs 1–4 are completed when the Chinese Reinforcement Phase is complete. GT 5 ends after the completion of either the Chinese Movement or Combat Phase (whichever occurs last).

  • At the end of GT 1 through GT 4, players should move the turn marker one box forward on the Turn Record Track.
  • At the end of GT 5, the game ends and players then determine victory (4.0).

6.0 Stacking

Stacking is the term used to describe the placement of more than one friendly unit in the same hex at the same time.

  • Opposing units never stack together, only friendly units stack together.
  • Players must check stacking at the following times:
    1. During set up.
    2. At the end of each Movement, Combat, and Reinforcement Phase.
    3. After a stack advances after combat.
  • If any hexes are found to be over-stacked, the owning player must eliminate the number of units (player's choice) present that exceed that side's stacking limits (6.1).

Important: Markers do not count against stacking limits.

6.1 Stacking Limits

Both sides may stack two units of any size in a hex. Additionally, one unit with a defense factor of zero may stack in a hex. See 6.2 and 6.3 for national restrictions.

Important: Only one unit with a defense factor of zero may stack in any hex, no matter the number of other units in the hex.

6.2 Soviet Stacking

The Soviet player may not stack units from different divisions in the same hex (21st, 35th, and 36th).

  • Units assigned to the 18th Rifle Corps may stack with any units (including other 18th Rifle Corps units). The player must still abide by the stacking restrictions in 6.1.

Important: Units of different divisions may attack the same hex; however, they may not advance together after combat into the same hex.

Stacking diagrams (printed as counter illustrations; the text below each one is the rule):

  • The 3 units below may stack together. (Shown with "+" marks.)
  • The 3 units below may not stack together. (Shown with "×" marks.)
  • The 3 units below may not stack together. (Shown with "×" marks.)

6.3 Chinese Stacking

The Chinese player may not stack units from different high-level commands in the same hex (15th Brigade, 17th Brigade, and 2nd Army).

Important: Units of the different high-level commands may attack the same hex; however, they may not advance together after combat into the same hex.

6.4 Fog of War

Due to the excellent air reconnaissance provided historically by the Soviet Air Force, the Soviet player is always allowed to look through Chinese stacks. The Chinese player may not look beneath the top unit of any Soviet stack until such time as a player initiates combat.

Important: The Chinese player may not cancel a declared attack after observing the Soviet units in a stack.

7.0 Zones of Control (ZOC)

The six hexes immediately surrounding a hex containing one or more ground units of all types constitute the ZOC of the units in that hex.

  • There is no difference in effect between ZOCs projected by units of different sides or types into the same hex.
  • Opposing units may simultaneously project their ZOC into the same hexes.
  • ZOCs project into, out of, and across all types of terrain as well as river hexsides.

7.1 Enemy Zones of Control (EZOC) & Movement

A moving unit must stop its movement for that phase when it first enters a hex containing an EZOC.

  • The presence of a friendly unit in an EZOC does not negate that EZOC for purposes of movement.
  • A unit that begins a friendly Movement Phase in an EZOC may leave that hex provided the first hex it enters does not contain an EZOC. If the unit enters another EZOC it must immediately cease movement.
  • A unit's ZOC is never negated for any reason.
  • Units that begin a friendly Combat Phase in an EZOC are not required to attack opposing units.

Exception: The Soviet 5th Cavalry Brigade is not required to cease movement when entering an EZOC. The unit may expend an additional two movement points to exit an EZOC hex that it entered that phase. The unit may move directly from one EZOC to another hex in an EZOC. Note that the 5th Cavalry Brigade does not pay to exit an EZOC in a hex that the unit began its movement.

7.2 EZOC & Advance After Combat

EZOCs do not affect units advancing after combat.

8.0 Movement

A unit's movement factor (2.3.6) is the number of movement points (MPs) that a unit may expend each GT.

  • Players move units from hex to adjacent hex (no skipping hexes) with units paying different MP costs depending on their type and terrain in each hex entered.
  • MP may not be accumulated from GT to GT or phase to phase, nor may they be loaned or given from one unit or stack to another.
  • A player may move any number of friendly units during each friendly Movement Phase.
  • Units are not required to expend all their MP before stopping.
  • The movement of each unit must be completed before that of another is begun. A player may only change the location of an already moved unit if his opponent agrees to allow it.
  • Units may not enter enemy occupied hexes.

8.1 Stack Movement

Units may not move as a stack; players must move units individually.

8.2 No Minimum Movement Ability

There is no minimum movement rule. A unit must have sufficient MP remaining to enter a hex.

8.3 Soviet Armored Train Group (ATG)

The Soviet ATG unit has a printed MF of "R", to indicate that it may only move along railroad hexes via hexsides crossed by the railroad line symbol. It may move any distance along the railroad each turn subject to the following:

  • The ATG unit must abide by the movement restrictions for EZOC (7.1).
  • The ATG unit must cease movement when it enters the hex containing the rail cut marker.
  • If the ATG unit begins a friendly Movement Phase in the rail cut hex, the rail cut marker is removed from play. The ATG may move along railroads normally.
  • The ATG unit may advance after combat into the hex containing the rail cut marker (it may not advance past the cut marker). In this case, the marker is removed at the end of the next Soviet Movement Phase.

Important: The rail cut marker may not move from its set up hex, nor may it be placed back on the map after the ATG removes it.

Designer's Note: The cut marker represents the fact that the Soviet Air Force conducted a Guernica-type bombing raid against Manchouli just prior to the start of the campaign, during which they succeeded in wrecking the town's rail station.

8.4 Road Movement

Roads enable units moving along their course (moving from one road hex to an adjacent road hex via a hexside crossed by the road symbol) to expend one MP no matter the hexside or in-hex terrain.

Important: Railroad hexes are also road hexes. The rail cut marker has no effect on moving along a road.

8.5 River Hexsides

The +1 river hexside crossing cost is paid in addition to the cost of the terrain inside the hex being entered. Units using road movement and the ATG unit ignore this MP cost.

8.6 Other Terrain

All other MP costs are shown on the Terrain Effects Chart. The MP cost is paid for each such hex entered by non-ATG units.

Example: Each clear hex entered costs two MP.

8.7 Territorial Restrictions

Units may always enter any non-prohibited hex within their own country.

  • Soviet units may enter any hex on the map.
  • Chinese units may not move or attack into the Soviet Union or Mongolia.

Designer's Note: Eager to get and keep as much of world opinion on their side as possible, the Chinese announced they would only fight to maintain the sovereignty of their own national territory.

9.0 Combat

Combat takes place between adjacent opposing units during each Combat Phase.

Exception: Soviet heavy artillery units (9.2).

  • The player who is conducting the Combat Phase is the "attacker," and the other player is the "defender," regardless of the general situation across the map.
  • Attacking is always voluntary. Each player is always free to attack or not, as he chooses on a case-by-case basis, during his own Combat Phase.
  • No defending unit may ever refuse combat; all units in an attacked hex must participate in its defense.
  • Once an attack has been declared it may not be called off; its resolution must be carried through to a conclusion.
  • If there are two or more enemy units in a hex being attacked, the attacking player may only attack that stack as if it were one combined defending unit.
  • An enemy-occupied hex may be attacked by any or all attacking units as can be brought to bear from any adjacent hexes.
  • No more than one hex may be the object of any one attack.
  • No attacking unit may have its attack factor divided and applied to more than one combat.
  • Not all the units stacked in a hex are required to participate in the same attack. Units in a stack might attack into one hex while others attack into another hex or do not attack at all.
  • No defending unit or stack may have part of its defense factor(s) attacked by one or more attackers while another part(s) is attacked by others.
  • No attacking unit may attack more than once per Combat Phase, and no defending unit may be attacked more than once per Combat Phase.
  • There is no arbitrary limit on the number of attacks each player may resolve during a Combat Phase.
  • The attacker need not declare all his attacks beforehand, and they may be resolved in any order the attacking player wishes so long as the resolution of one is completed before that of the next is begun.

9.1 Combat Procedure

The attacking player should strive to have more attack factors involved in a battle than the defender has defense factors.

Important: When playing Stalin's First Victory, players use the second differential line across the top of the Combat Results Table (CRT) labeled SFV.

  • The defending player totals the defense factors of participating defending units.
  • The attacking player totals the attack factors of all participating attacking units.
  • Players then subtract the defending player's total from the attacking player's total.
  • Column headings on the CRT range from "≤ 0" to "≥ 10." Find the column heading that is closest to the combat differential that was just calculated.

Example: If the attacking force contains five attack factors, and the defending force contains three defense factors, the combat would be resolved (unless columns shifts were also involved) using the "+2" column on the CRT.

9.2 Soviet Heavy Artillery

If the Soviet player declares a Combat/Move sequence, the two Soviet heavy artillery units may participate in the attack even if not adjacent to the defending units.

  • The Soviet units may add their attack factors to an attack if they are within two hexes (one intervening hex) of the defending hex and adjacent to at least one attacking unit that is adjacent to the defending hex.

Important: Soviet heavy artillery units may conduct an attack using their two-hex range only if there is at least one other Soviet unit participating in that attack (this could be the other Soviet heavy artillery unit), and that other unit must be adjacent to both the defending hex and to the two-hex-distant heavy artillery unit.

  • Terrain has no effect on this special ability.

  • Heavy artillery units using their two-hex range are not affected by the combat in any manner.

  • If the Soviet player declared a Move/Combat sequence, then his heavy artillery units may only participate in combat if adjacent to a defending hex, and do so [printed as "do so n the regular way"; read as "do so in the regular way"] with the restrictions above.

Important: Chinese artillery units do not have this ability.

9.3 Column Shifts

Combat differentials may be shifted by:

  1. The terrain in the defender's hex.
  2. If the attacking units qualify for a concentric attack bonus (9.4).
  3. Soviet divisional integrity.
  • Left shifts favor the defender; right shifts favor the attacker.
  • Consult the TEC to determine if any terrain shifts apply.
  • All applicable column shifts are cumulative. All column shifts are applied resulting in a final left or right shifts of one or more columns.

Important: The rivers in the area were frozen during the campaign and thus while they do affect movement, they do not affect combat.

9.4 Concentric Attack

If a defending hex is attacked by units in opposite hexes, or by units from three surrounding hexes with one hex between each and the next attacker-occupied hex, or by units from more than three hexes, that attack is eligible to receive a concentric attack bonus. Concentric attacks award a one right column shift.

Important: Do not award a concentric attack bonus if the defending units are in a town hex.

9.5 Soviet Divisional Integrity Bonus

If all three regiments of a Soviet rifle division participate in the same attack, the Soviet player is awarded one column shift to the right.

Important: Participation of more than one division does not increase this award.

9.6 Final Combat Resolution

After all applicable differential shifts have been applied and the appropriate column on the Combat Results Table determined, the attacker rolls 1d6 and cross-indexes the result with the final differential column to get a combat result.

  • Combat results are given in terms of steps lost by the involved units of one or both sides. a) The number printed to the left of the slash applies to the involved attacking units. b) The number printed to the right of the slash applies to the involved defending units.

Example: A combat result of "1/2" would mean the attacking force must lose a total of one step, while the defending force must lose a total of two steps.

  • In each combat the defender must apply his own losses first, then the attacking player applies his own losses.
  • If a side's force is eliminated, all remaining losses are ignored.
  • Losses are apportioned in any manner the owning player desires.

Important: If the defender is in a town hex, add one to the number of attacker losses (even if that number was 0).

9.7 Advance-After-Combat

After removing all required losses, if all defending units are eliminated, then participating attacking units may advance after combat.

  • Attacking units may move into the defending hex.
  • Stacking limitations must be observed (6.0).
  • Advance after combat is not regular movement and does not involve the expenditure of MP.
  • Advancing units ignore EZOC.
  • Advance after combat is an option; it is not mandatory.
  • The decision to advance must be made immediately after a combat is resolved and before that of another is begun.
  • The advancing player may advance any number of participating attacking units (stacking limitations apply).

Important: Defending units may not advance after combat.

The Battle of Taierzhuang (1938)

1.0 Introduction

The Battle of Taierzhuang (BoT): Covers the fighting that climaxed the first (failed) Japanese offensive of 1938 in China.

1.1 Scale

Each hex on the map represents one quarter mile or 400 meters. Each GT represents two days. Units of maneuver are Japanese infantry battalions, tank companies, and Chinese regiments.

1.2 Sides

One player commands the Japanese forces and the other commands the Chinese forces.

1.3 Map Directions

The compass rose shown on the map indicates magnetic north. For all game purposes:

  • The north map edge consists of the row of hexes from 0101–2201 inclusive.
  • The south map edge consists of the row of hexes from 0120–2219 inclusive.
  • The west map edge consists of hexes 0102–0119 inclusive.
  • The east map edge consists of hexes 2202–2218 inclusive.

2.0 Components

Taierzhuang consists of the second section of this rule booklet and the Taierzhuang portion of the 22×34-inch game map, including the BoT Terrain Effects Chart, BOT Terrain Key, BOT Turn Record Track (TRT), and Combat Results Table (CRT). The game also includes 128 5/8-inch counters (left side and control markers on the lower right side of counter sheet). Players must provide one six-sided die to resolve combat and other random game events.

2.1 The Map

The map shows the militarily significant terrain in and around the area of the city of Taierzhuang where this campaign was fought in 1938. The hexagonal (hex) grid printed over it regulates the placement and movement of units.

  • A unit may be in only one hex at any one time.
  • Each hex contains natural and/or manmade features that affect movement and combat.
  • Each hex on the map has a unique four-digit identification number printed within it.

Example: The town of Wanzhuang is in hex 0414.

2.2 Counters

There are two basic types of counters: combat units and markers.

  • Combat units represent the combat formations that existed at the time.
  • Markers allow players to note the specific status of a hex or unit(s) and function as memory aids.
  • After reading these rules at least once, carefully punch out the counters. Trimming off the dog ears from their corners with a fingernail clipper will facilitate easier handling and stacking during play and enhances their appearance.

2.3 Combat Units

Each combat unit counter displays specific types of information: nationality, historic identification, unit type, organizational size, number of steps, combat, and movement factors.

The counter diagram labels the unit size symbol, number of steps, unit type symbol, organizational ID, unit ID, attack factor, movement factor and defense factor.

Important: The number of steps is not shown on Chinese units. All Chinese units are one-step units.

2.3.1 Unit Color Schemes & Abbreviations

The color of the counters denotes the side or nationality to which the counter belongs.

Japanese Units

  • 5th Division (Red on White)
  • 10th Division (White on Red)

Chinese Units

  • 2nd Army (White on Dark Blue)
  • 20th Army (Black on Green)

Designer's Note: Do not be swamped by all the nomenclature presented in 2.3.2 & 2.3.3. The information is provided merely for historical veracity. For play purposes, the only identity and affiliation numbers that matter are that of the two different divisions on the Japanese side and the two different armies on the Chinese side, and these are also indicated by the color of the counter.

2.3.2 Higher-Level Organizations

The numbers to the right and left of the unit type symbol on the Japanese units are as follows:

  1. The SD abbreviation on the 5th Division headquarters (HQ) unit stands for Sakamoto Detachment. The SD abbreviation on the 10th Division HQ unit stands for Seya Detachment (both named for their commanders).
  2. The number to the left of the Japanese infantry units' unit type symbol are their divisional affiliations, either the 5th or 10th Divisions.
  3. The numbers to the right of the Japanese infantry unit type symbol are read as battalion/regiment/brigade.

Example: The unit identified as "1/10/33" is the 1st Battalion of the 10th Regiment of the 33rd Brigade (of the 10th Division).

  1. The 39th Regiment of the 8th Brigade of the 10th Division contains four battalions instead of the normal three; however, that extra battalion (the 4th) is only at half-strength, and so has only two steps represented on one counter rather than the normal four steps on two counters.
  2. On the Chinese infantry units, their army affiliations (2nd or 20th) are shown on their otherwise blank reverse sides.
  3. The Chinese 4th Artillery Regiment was held as an asset by 52nd Corps, so it only has those two numbers on its counter.
  4. The corps affiliation of the frontside Chinese infantry units (front side) their corps affiliations are shown to the left of their unit type symbol. The numbers to the right of their unit type symbol are read; regiment/brigade/division.

[Editor's note: item 7 is garbled in the printed source, which reads "...frontside Chinese infantry units (front side) their corps affiliations...". It is transcribed as printed, with the "(front side)" phrase kept.]

Exception: There is one brigade (the 44th) in the 42nd Corps that has no divisional affiliation. The two numbers to the right of the unit type symbol of its two component regiments are to be read as: regiment/brigade.

2.3.3 Organizational Size

The organizational sizes of the units are shown using the following symbols at the top of each counter.

  • III: Regiment
  • II: Battalion
  • I: Company

2.3.4 Unit Types

There are five types of units in the game:

  • Armored Cars (Reconnaissance)
  • Tanks
  • Infantry
  • Chinese Artillery
  • Headquarters

2.3.5 Attack & Defense Factors

Attack and defense factors (together known as combat factors) serve as measures of each unit's ability to engage enemy formations in combat (9.0).

2.3.6 Movement Factors

A unit's movement factor is the measure of the unit's ability to move across the hex grid printed over the map. Units pay various costs from their movement factor to enter different hexes depending on the terrain in each hex, any water along the hexsides around them, and the moving unit's mobility class.

2.3.7 Step Strength

The term "step" is the common term used to express the ability of a unit to absorb a certain amount of combat losses before ceasing to be an effective formation (a measure of its "robustness" in current US Army jargon). Those units with combat factors printed on only one side of their counters are "one-step" units; all Chinese units are one-step. Japanese units begin the game with one, two, or four steps. Each unit beginning the game with four steps has two counters: one for its four and three-step strengths, and one for its two and one-step strengths. Only one of these counters is ever on the map at any given time.

  • Each Japanese unit's current step strength is shown by the number in the upper left corner of the counter.
  • If a four-strength Japanese unit suffers a step loss, it is flipped over so the side with three-steps shows.
  • If a three-step Japanese unit suffers a step loss, remove the counter, and replace it with the unit's second counter showing two-steps.
  • If a two-step counter receives a step loss, flip the counter over so the one-step side is now showing.
  • When a one-step unit suffers a step loss, remove the counter from the map.
  • Eliminated units from either side cannot return to play. Reduced units may not be returned to full strength.

2.4 Markers

The counter-mix includes the following informational memory aid markers. Their uses are explained in appropriate sections of the rules:

  • Hex Control (3.3)
  • Game Turn (5.0)
  • Japanese Air Support
  • Japanese Artillery Support (9.3)
  • Chinese Reinforcement Map Edge

3.0 Set Up & Hex Control

After first deciding who will command which side, both players should sort and set up the units of their own side as well as the markers according to the following instructions. All stacking rules are in effect during set up for both sides (6.0).

3.1 Initial Marker Placement

Set aside, within easy reach of both players, all hex-control markers.

  • Place the turn marker on the BoT TRT in the Turn 1 24–25 March box.

3.2 Japanese Set Up

The Japanese player sets up first.

  • All multi-step Japanese units begin play at their full step-strength.
  • The second, reduced strength counters for such units are placed on one side of the map.
  • Place all units of the Japanese 5th Division (seven units on 13 total counters) and the two 5th Division artillery markers to the side.
  • Place the six 10th Division artillery and two air support markers to the side. Keep them separate from the two 5th Division artillery markers.
  • Place all 14 full-strength counters of the 10th Division units in any hexes north/northeast of the frontline shown on the map. The Japanese player is not required to have units or their ZOCs in front line hexes. Stacking limits apply (6.0). The nine reduced-strength 10th division counters are placed on one side of the map.

Important: The 4/39/8 unit is a two-step unit with only one counter.

3.3 Chinese Set Up

The Chinese player sets up second.

  • Place the 20th Army artillery unit to the side (face up).
  • Place all other 20th Army units (24) to the side, unstacked and face down.
  • Place all 14 units of the 2nd Army to the side, unstacked and face down.

Important: All face down Chinese units have a movement factor of six.

Designer's Note: Players may wish to place the 24 20th Army units and all 2nd Army units in two separate opaque containers and then randomly draw units when required. No matter which method the players choose, the Chinese player should be careful that neither he nor the Japanese player sees which units are drawn and placed on the map.

  • The Chinese player places the three map edge reinforcement markers in an opaque container.
  • The Chinese player then randomly picks one 2nd Army unit at a time and places it anywhere on the map south/southwest of the frontline using the following guidelines:
    1. Stacking limits apply (6.2).
    2. Units may be set up in EZOC.
    3. There is no requirement to have a unit or friendly ZOC in every hex adjacent to the frontline.

Important: All Chinese units (except the 20th Army artillery unit) on the map remain hidden (unit side face down) until revealed during combat. Neither player may examine those units until revealed.

3.4 Initial Hex Control

At the start of the game, the Japanese player controls all hexes to the north, northeast of the frontline. The Chinese player controls all other hexes.

  • The control status of a hex changes from one side to the other each time a unit of the opposing side moves into it.
  • The projection of a zone of control (ZOC) into a hex does not cause control of a hex to change (7.0).
  • The control status of most hexes on the map is not important; however, the control of Taierzhuang city hexes and specific railroad hexes do determine victory (4.0).

4.0 How to Win

The Japanese player begins the game on the offensive, fighting to capture all Taierzhuang hexes or by controlling one or more hexes in the town center along with one or more hexes of the Long-Hai Railroad. The Chinese player may win defensively by preventing the Japanese player from achieving those goals, or he may win by eliminating or isolating either or both Japanese headquarters units.

Designer's Note: The victory conditions are intended to create a competitively interesting situation for both players, despite the advantage historic hindsight inescapably gives them over their historical counterparts in command. That is, the Japanese had no idea they were advancing into a trap as they moved south; they were anticipating final Chinese collapse due to their victorious advance. At the same time, Chinese planning regarding the details of their counteroffensive was anything but cogent or systematic, despite their German advisors' attempts to make it so. The victory conditions, combined with both sides' uncertain reinforcement schedules, are intended to recreate, as much as possible, both sides' outlooks and goals as they existed at the time. Different matches can take divergent courses based on whether the Japanese or Chinese get lucky regarding their reinforcement's arrival.

4.1 Japanese Victory

There are two ways for the Japanese player to win the game:

  1. If at any time prior to the end of GT 8, the Japanese player controls all 26 hexes (all those hexes inside the town wall) of Taierzhuang, play stops and the Japanese player wins the game.
  2. If at the end of GT 8, the Japanese player simultaneously controls one or more of the nine Taierzhuang town center hexes and one or more hexes of the Long-Hai Railroad from hex 0419–1218–2120 (inclusive) the Japanese player wins the game.

4.2 Chinese Victory

There are three ways for the Chinese player to win the game:

  1. If at any time prior to the end of GT 8 the Chinese player eliminates either one of the Japanese HQ units, play stops, and the Chinese player wins the game.
  2. If at the end of GT 6, the Japanese player has failed to gain control of one or more of the nine Taierzhuang town center hexes the Chinese player wins the game.

Important: To avoid a Chinese victory for the above, a Japanese unit must have entered at least one of the nine town center hexes at any time prior to the end of GT 6.

Example: If on GT 3, a Japanese unit has entered a town center hex, the Chinese victory listed in 2) is not possible. There is no requirement for a Japanese unit to be in a town center hex at the end of GT 6.

  1. If at the end of GT 8, both Japanese HQ units are on the map, but it is impossible for both HQs to trace supply paths (5.3) to the north map edge (1.3), the Chinese player wins the game.

4.3 Drawn Games

If neither player wins based on any of the above conditions by the end of GT 8, the game is a draw. This was the historic outcome as reckoned by these victory conditions.

Important: It is possible for the Japanese player to fulfill that side's second victory condition while the Chinese player fulfills his side's third victory condition. In this case that game also ends in a draw.

5.0 Turn Sequence & Reinforcements

GTs are divided into two player turns, one Japanese and one Chinese, which taken together comprise a variably sequenced series of steps or phases.

  • Each full sequence of phases (5.1) makes up one GT.
  • Each game of Taierzhuang is comprised of a maximum of eight GTs.
  • Players must conduct each player's turn and each phase within a player's turn in the order given.
  • Every action taken by a player must be conducted during the appropriate part of the sequence.
  • The player conducting a player turn is the phasing player, the other player is the non-phasing player.
  • Once a player has finished a phase, or an activity within a phase, the player may not go back to perform a forgotten action or redo a poorly executed one unless his opponent permits it.

5.1 Turn Sequence

The GT sequence is given below. The rest of the rules are organized, as much as possible, to explain things in the order they are encountered.

Chinese Player Turn (skip on GT 1)

  1. Chinese Reinforcement Phase (GT 2–6 only) (5.2)
  2. Chinese Sequence Determination Phase (5.5)
  3. Chinese Movement or Combat Phase (8.0 & 9.0)
  4. Chinese Combat or Movement Phase (8.0 & 9.0)

Japanese Player Turn (see 5.6 for special GT 8 Breakout procedures)

  1. Japanese Logistic Check Phase (skip on GT 1) (5.3)
  2. Japanese Reinforcement Phase (skip on GT 1) (5.4)
  3. Japanese Sequence Determination Phase (5.5)
  4. Japanese Movement or Combat Phase (8.0 & 9.0)
  5. Japanese Combat or Movement Phase (8.0 & 9.0)

5.2 Chinese Reinforcements (GT 2 Through GT 6)

Starting on GT 2 and continuing through GT 6, during the Chinese Reinforcement Phase, the Chinese player conducts the following reinforcement procedure:

  1. Randomly pick one map edge reinforcement marker. All reinforcements received during the current phase will enter on that map edge (1.3). The marker is revealed immediately.
  2. Roll 1d6. If the result is a one or two, the 4th Artillery Regiment arrives. On any other DR result the unit does not arrive; however, the Chinese player may roll on every succeeding GT through GT 6 or until the unit does arrive.
  3. Roll another 1d6. The result is the number of 20th Army units the player randomly picks. Those units arrive during the current phase.

Important: Neither player examines the units picked in 3).

  • All Chinese reinforcements are immediately placed on any map edge hexes as determined by the map edge reinforcement marker drawn this GT using the following criteria:
    1. The units must be placed south of the front line shown on the map.
    2. All units (except the 4th Artillery Regiment) are placed face down. Neither player may examine the units.
    3. Units must comply with stacking limits (6.0).
    4. The units may not be placed in an enemy occupied hex; however, they may be placed in an EZOC.
  • All reinforcements may operate normally on their GT of arrival.
  • All determined reinforcements must enter the map on the GT they were rolled for. If the Chinese player is unable to place all his reinforcements due on that GT, then any unplaced units are permanently removed from play.
  • On GT 7 all remaining reinforcements arrive. The units may arrive at any or all the three map edges allowed by the map edge reinforcement markers. Any units that have not arrived at the beginning of GT 8 are removed from play.

Important: Chinese infantry units arrive with neither player knowing their combat strengths, and they are deployed onto the map with their untried side up. A Chinese infantry unit is permanently flipped to its tried side (with combat factors) as soon as it participates in an offensive or defensive combat.

[Editor's note: the printed source reads "If the Chinese player i unable to place all his reinforcements due..."; the apparent typo "i" is transcribed here as "is".]

5.3 Japanese Logistics Check Phase (GT 2 to GT 8 only)

During the Japanese Logistic Check Phase, the Japanese player must determine if the two Japanese HQs are in supply.

  • A Japanese HQ is in supply if a path of contiguous hexes can be traced from the HQ to a north map edge hex (1.3).
  • The path may be of any length and may be traced through any terrain.
  • The path may not enter an enemy occupied hex, or a hex in an EZOC unless that hex is occupied by a friendly unit.
  • If an HQ cannot trace a supply path to the north map edge, units affiliated with that HQ may not be assigned artillery support markers. The use of air support markers is not affected.

Important: Players should mark an out of supply HQ with a control marker as a memory aid. Remove the marker at the beginning of the next Japanese Logistics Check Phase.

5.4 Japanese Reinforcements (GT 2 to GT 7 only)

During the Japanese Reinforcement Phase, the Japanese player rolls 1d6.

  • If the result is less than the current GT number, all units of the 5th Division arrive as reinforcements.
  • If the 5th Division has not arrived by the beginning of GT 7, all units of the 5th Division arrive automatically in the Japanese Reinforcement Phase of GT 7.
  • All Japanese reinforcements are immediately placed on any north map edge hexes (1.3):
    1. Units must comply with the stacking limits (6.0).
    2. The units may not be placed in enemy occupied hexes; however, they may be placed in EZOC.
  • All reinforcements may operate normally on their GT of arrival.
  • All determined reinforcements must enter the map on the GT they were rolled for. If the Japanese player is unable to place all his reinforcements due on that GT, then any unplaced units are permanently removed from play.

5.5 Move/Fight or Fight/Move Sequence

During the Sequence Declaration Phase, the phasing player must determine the order in which he will conduct the Movement and Combat Phases. See 5.5.1 and 5.5.2 for the procedures for each nationality.

  • Each player may either conduct his Movement Phase and then his Combat Phase or conduct his Combat Phase and then his Movement Phase.
  • No matter which sequence order is taken, all friendly units on the map may participate to the limit of their normal capabilities in each phase.
  • A player may not conduct one order for some friendly units and another for other friendly units. All friendly units must conduct the Combat and Movement Phases in the order declared.
  • There is no inherent advantage or disadvantage in either sequence. That is, there are no automatic combat or movement penalties or bonuses for either player in either phase sequence.

5.5.1 Chinese Sequence Procedure

During each Chinese Sequence Determination Phase during GT 2 through GT 6, the Chinese player rolls 1d6.

  1. If the DR result is one through three the Chinese player must conduct the Chinese Movement Phase, then the Chinese Combat Phase.
  2. If the DR result is four through six the Chinese player must conduct the Chinese Combat Phase and then the Chinese Movement Phase.
  • On GT 7 and GT 8, the Chinese player is free to choose the Chinese sequence order.

5.5.2 Japanese Sequence Procedure

The Japanese player is free to choose the Japanese sequence order on all GTs.

5.6 GT 8 Japanese Breakout

If at the beginning of the GT 8 Japanese player turn both Japanese HQs are unable to trace a line of supply (5.3), the Japanese player may declare a breakout attempt.

  • The Japanese player is not required to declare a breakout.
  • If the breakout is declared:
    1. The Japanese player immediately removes all artillery markers from the game. The two air support markers are not affected.
    2. During the ensuing Japanese Movement Phase, Japanese units may only move into hexes north, northeast or northwest of the hex in which they began the Movement Phase in.
    3. During the Japanese Combat Phase, Japanese units may only attack into hexes that lie to the north, northeast, or northwest of at least one of the Japanese units participating in that combat.
    4. All Japanese attacks are awarded two column shifts to the right.

5.7 Ending GTs

Each GT is complete when Phase 5 of the Japanese player turn is completed. If it is the end of GT 8, the game ends and the players determine victory (4.0). At the end of any other GT, the players move the game turn marker to the next GT box on the appropriate Turn Record Track.

6.0 Stacking

Stacking is the term used to describe the placement of more than one friendly unit in the same hex at the same time.

  • Opposing units never stack together, only friendly units stack together.
  • Players must check stacking at the following times:
    1. During set up.
    2. At the end of each Reinforcement, Movement, and Combat Phase.
    3. After a stack advances after combat.
  • If any hexes are found to be over-stacked, the owning player must eliminate his choice of units that are in excess of that side's stacking limits (6.1).

Important: Markers do not count against stacking limits.

6.1 Japanese Stacking Limits

The Japanese stacking limit is one infantry unit plus one of the following:

  1. One HQ; or,
  2. One tank unit; or,
  3. One armored car unit.

Important: Units from one Japanese division may be stacked with units of the other division, however, see 9.2 and 9.3 for restrictions regarding units/support participation in the same attack.

Important: The HQ, tank, or armored car unit must be the top unit in the stack.

6.2 Chinese Stacking

The Chinese stacking limit is one infantry unit. Additionally, the 4th Artillery Regiment may stack with any one infantry unit. The artillery regiment must be the top unit in a stack.

Important: The 4th Artillery Regiment may stack with units from either Chinese army, however, see 9.2 for restrictions regarding the units participation in the same attack.

6.3 Fog of War

Neither player may look beneath the top unit of any stack belonging to his opponent until such time as a combat is declared into or from that hex. Once units are revealed, the attacking player may not call off an attack.

Exception: If the Japanese player is conducting an attack and there is at least one tank or armored car unit participating in the attack, the Japanese player may, after declaring the attack examine all defending units and may then cancel the attack. The units that were participating in the attack may not conduct another attack. If the attack is cancelled the defending units are returned to their unrevealed status.

7.0 Zones of Control (ZOC)

The six hexes immediately surrounding a hex containing one or more ground units of all types constitute the ZOC of the units in that hex.

  • There is no difference in effect between ZOCs projected by units of different sides or types into the same hex.
  • Opposing units may simultaneously project their ZOC into the same hexes.
  • ZOCs project into, out of, and across all types of terrain as well as river hexsides.
  • Units that begin a friendly Combat Phase in an EZOC are not required to attack opposing units.

7.1 Enemy Zones of Control (EZOC) & Movement

A moving unit must stop its movement for that phase when it first enters a hex containing an EZOC.

  • The presence of a friendly unit in an EZOC does not negate that EZOC for purposes of movement.
  • A unit that begins a friendly Movement Phase in an EZOC may leave that hex provided the first hex it enters does not contain an EZOC. If the unit enters another EZOC it must immediately cease movement.
  • A unit's ZOC is never negated for any reason.

7.2 EZOC & Advance After Combat

EZOCs do not affect units advancing after combat.

7.3 Negating Chinese ZOC

The presence of a Japanese unit in a hex containing a Chinese ZOC will negate that ZOC for certain purposes. See rules 5.3.

8.0 Movement

A unit's movement factor (2.3.6) is the number of movement points (MPs) that a unit may expend each GT.

Important: All face down Chinese units have a movement factor of six.

  • Players move units from hex to adjacent hex (no skipping of hexes) with units paying varied MP costs depending on their type and the terrain in each hex entered.
  • MPs may not be accumulated from GT to GT or phase to phase, nor may they be loaned or given from one unit or stack to another.
  • A player may move any number of friendly units during a friendly Movement Phase.
  • Units are not required to expend all their MPs before stopping.
  • The movement of each unit or stack must be completed before that of another is begun. A player may only change the location of an already moved unit or stack if his opponent agrees to allow it.

8.1 Stack Movement

Units may not move as a stack; players must move units individually.

8.2 Minimum Movement

There is no minimum movement rule. A unit must have sufficient MF remaining to enter a hex.

8.3 Terrain & Japanese Movement

Japanese units pay varying costs to enter hexes based on the terrain in each hex and any water barrier (canal) along its hexsides. See the Terrain Effects Chart.

  • Each hex is defined by only one terrain type, generally the one with the greater MP cost.

Example: If a hex contained clear terrain and a village, that hex is a village hex. A Japanese unit would expend three MF to enter the hex.

  • Japanese units moving from a railroad hex to a railroad hex across a hexside containing a railroad symbol expend one MF per hex. Japanese units moving into a railroad hex from any other hex pay the cost of the other terrain in the hex (clear or village).

Important: Tank and armored car units may not move into town center hexes; they may, however, attack into such hexes (but cannot advance after combat into them).

  • The two bridges on the map may not be destroyed. Japanese units may only cross canal hexsides when crossing at a bridge.

8.4 Terrain & Chinese Movement

Chinese units expend only one MP to enter or cross any type of terrain.

Important: The 4th Artillery Regiment may only move, or attack cross the canal at a bridge hexside. All other Chinese units ignore the canal for movement purposes.

[Editor's note: the printed sentence reads "may only move, or attack cross the canal at a bridge hexside"; transcribed as printed.]

9.0 Combat

Combat takes place between adjacent opposing units during each Combat Phase.

  • The player who is conducting the Combat Phase is the "attacker," and the other player is the "defender," regardless of the general situation across the map.
  • Attacking is always voluntary. Each player is always free to attack or not, as he chooses on a case-by-case basis, during his own Combat Phase.
  • Once an attack has been declared it may not be called off; its resolution must be carried through to a conclusion. Exception: See 6.3.
  • If there are two or more enemy units in a hex being attacked, the attacking player may only attack that stack as if it were one combined defending unit.
  • An enemy-occupied hex may be attacked by as many attacking units as can be brought to bear from one, some or all the adjacent hexes.
  • No more than one hex may be the object of any one attack.
  • No attacking unit may have its attack factor divided and applied to more than one combat.
  • No defending unit may have part of its defense factor attacked by one or more attackers while another part is attacked by others.
  • No attacking unit may attack more than once per Combat Phase, and no defending unit may be attacked more than once per Combat Phase (Exceptions: 9.10 & 9.11).
  • There is no arbitrary limit on the number of attacks each player may resolve during a Combat Phase.
  • The attacker need not declare all his attacks beforehand, and they may be resolved in any order the attacking player wishes so long as the resolution of one is completed before that of the next is begun.
  • Not all the units stacked in a hex are required to participate in the same attack. Units in a stack might attack into one hex while others attack into another hex or do not attack at all.
  • No defending unit may ever refuse combat; all units in an attacked hex must participate in its defense.

9.1 Combat Procedure

The attacking player should strive to have more attack factors involved in a battle than the defender has defense factors.

Important: When playing Taierzhuang, players use the second Differential line across the top of the Combat Results Table (CRT) labeled BoT.

  1. The attacking player identifies the defending hex and the units that will participate in the attack.
  2. If the Japanese player is the attacker, the player may allocate air and artillery support markers (9.3).
  3. The defending player totals all participating defending unit's defensive factors. If the Chinese player is defending, hidden units are revealed. If the Japanese player is attacking with any tank or armored car units, he may now call off the attack (6.3).
  4. The attacking player totals the attack factors of all participating units (the factors may be affected by terrain).
  5. Players then subtract the defending player's total from the attacking player's total.
  6. Column headings on the CRT range from "≤ 0" to "≥ 30." Find the column largest heading that is less than or equal to the combat differential that was just calculated.

Example: If the attacking force contains 15 attack factors, and the defending force contains three defense factors, the combat would be resolved (unless columns shifts were also involved) using the "+10" column on the CRT.

9.2 Organizational Restrictions

Japanese units from that side's two different divisions (5th & 10th) may never participate together in the same attack. Chinese units from that side's two different armies (2nd & 20th) may never participate together in the same attack.

Important: Units from two Japanese divisions and/or two Chinese armies that are stacked in the same hex may defend normally.

9.3 Japanese Air & Artillery Support Markers

The Japanese player has two air support markers and eight artillery support markers. They may be committed to aid in strengthening Japanese attacks (but not Japanese defenses).

  • Support markers may only be used once per game turn.
  • Air support markers may be used to support attacks anywhere on the map and may be used to support either division.
  • Artillery support markers may only be used by their own division and the defending hex must be within four hexes of the divisional HQ. Count the defender's hex, but not the hex occupied by the HQ.
  • Air support and artillery support markers may not be used if the defending hex is a town center hex.
  • Any number of eligible air support and artillery support markers may be committed to support a given Japanese attack.

Important: Japanese support markers may not be used when Japanese units are defending.

  • If the Japanese player calls off an attack air/artillery support markers are not used. They may be applied to another combat during the same phase (6.3).
  • After committing all desired and eligible markers, the Japanese player rolls 1d6 for each support marker committed and halves the result (round up). The resultant number is the number of attack factors that may be added to the Japanese attack.
  • After determining the total attack factors for all supporting markers, the Japanese player may add those attack factors to the attacking unit's total.

Important: The number of support marker combat factors may never exceed the total attack factor of all attacking units in that combat. Excess factors are lost and cannot be reapplied to a different combat.

  • Japanese air support and artillery support markers have no step or stacking or combat values of their own, nor may they be given up satisfy combat loss requirements.

[Editor's note: the printed last bullet reads "nor may they be given up satisfy combat loss requirements"; transcribed as printed. The printed word "to" appears to be missing.]

9.4 Column Shifts

Combat differentials may be shifted by:

  1. The terrain in the defender's hex.
  2. If the attacking units qualify for a concentric attack bonus (9.5).
  • Left shifts favor the defender; right shifts favor the attacker.
  • Consult the TEC to determine if any terrain shifts apply.
  • All applicable column shifts are cumulative. All column shifts are applied resulting in a final left or right shift of one or more columns.

9.5 Japanese Concentric Attack

If a defending hex is attacked by Japanese units in opposite hexes, or by units from three surrounding hexes with one hex between each and the next attacker-occupied hex, or by units from more than three hexes, that attack is eligible to receive a concentric attack bonus. Concentric attacks award a one right column shift.

Important: Attacking Chinese units are not eligible for concentric attack shifts.

9.6 Grand Canal Hexsides

Japanese units may only attack across the Grand Canal via the two bridge hexsides.

  • If all attacking Japanese units are attacking across a bridge, apply one left column shift.
  • If all attacking Chinese units are attacking across a canal hexside (including bridged hexsides), apply a one left column shift.

9.7 Town & Town Center Hexes

Town hexes provide column shifts and other benefits to defending units.

Town Hexes and Town Wall Hexsides:

  1. Defending units (either side) receive two column shifts to the left.
  2. The Japanese concentric attack bonus does not apply.
  3. Attacking units add one step loss to their required step losses. If the attacking units result is a zero, the one additional step loss still applies.
  4. If all attacking units are attacking into a town hex across wall hexsides the defender receives an additional one column shift to the left. This additional shift does not apply if attacking from a town hex into a village or clear hex.

Town Center Hexes:

  1. Defending units (either side) receive two column shifts to the left.
  2. The Japanese concentric attack bonus does not apply.
  3. Attacking units add one step loss to their required step losses. If the attacking units result is a zero, the one additional step loss still applies.
  4. The Japanese player may not apply artillery and or air support markers.
  5. Japanese tank and armored car units have an attack factor of one rather than their printed attack factor.

Important: Tank and armored car units may attack into, but not enter central town hexes (8.3).

9.8 Final Combat Resolution

After all applicable differential shifts have been applied and the appropriate column on the Combat Results Table determined, the attacker rolls 1d6 and cross-indexes the result with the final differential column to get a combat result.

  • Combat results are given in terms of steps lost by the involved units of one or both sides. a) The number printed to the left of the slash applies to the involved attacking units. b) The number printed to the right of the slash applies to the involved defending units.

Example: A combat result of "1/2" would mean the attacking force must lose a total of one step, while the defending force must lose a total of two steps.

  • In each combat the defender must apply his own losses first, then the attacking player applies his own losses.
  • If a side's force is eliminated, all remaining losses are ignored.

Important: If the defender is in a town or town center hex, add one to the number of attacker losses (even if that number was zero).

  • Losses are apportioned in any manner the owning player desires.

9.9 Advance After Combat

After removing all required losses, if all defending units are eliminated, participating attacking units may advance after combat.

  • Attacking units may move into the defending hex.
  • Stacking limitations must be observed (6.0).
  • Advance after combat is not regular movement and does not involve the expenditure of MP.
  • Advancing units ignore EZOC.
  • Advance after combat is an option; it is not mandatory.
  • The decision to advance must be made immediately after a combat is resolved and before that of another is begun.
  • The advancing player may advance any number of participating attacking units (stacking limitations apply).

Important: Defending units may not advance after combat.

9.10 Japanese Momentum Attacks

Attacking Japanese units that advance after combat (including those that launched a flank attack (9.1.1)) may immediately initiate a second (momentum) attack against any adjacent enemy occupied hex.

[Editor's note: the printed cross-reference "(9.1.1)" does not exist in this rule set; flank attacks are given in 9.11. Transcribed as printed.]

Important: If the Japanese units conducted a flank attack (9.11) as their first attack, those units cannot conduct a second flank attack as their momentum attack.

  • Only those Japanese units that advanced after combat are eligible to conduct a momentum attack.
  • Momentum attacks must be made prior to initiating another attack.
  • Momentum attacks are not required; they are at the option of the Japanese player.
  • A unit may only participate in one momentum attack per Combat Phase.

9.11 Japanese Flank Attacks

During a Combat Phase, if a Japanese unit or stack is located such that it is adjacent to one or more hexes occupied by enemy units and to one or more unoccupied hexes that contain only an EZOC, the Japanese player may launch an attack (flanking attack) into any one of those unoccupied EZOC hexes.

  • Flank attacks are conducted by moving the attacking unit(s) into the unoccupied defending hex (i.e., there is no calculation of combat differential, combat die roll of losses; attacking units simply make an automatic advance after combat).
  • Qualified Japanese units from different hexes may participate in the same flank attack. Stacking limits apply when moving the Japanese units into the defending hex (6.0).
  • Neither side suffers any losses.
  • Each unit may participate in only one flanking attack per Combat Phase.
  • 2.3.5 Attack & Defense Factors
  • 2.3.6 Movement Factors
  • 2.3.7 Step Strength
  • 2.4 Markers
  • 3.0 Set Up & Hex Control
    • 3.1 Initial Marker Placement
    • 3.2 Japanese Set Up
    • 3.3 Chinese Set Up
    • 3.4 Initial Hex Control
  • 4.0 How to Win
    • 4.1 Japanese Victory
    • 4.2 Chinese Victory
    • 4.3 Drawn Games
  • 5.0 Turn Sequence & Reinforcements
    • 5.1 Turn Sequence
    • 5.2 Chinese Reinforcements (GT 2 Through GT 6)
    • 5.3 Japanese Logistics Check Phase (GT 2 to GT 8 only)
    • 5.4 Japanese Reinforcements (GT 2 to GT 7 only)
    • 5.5 Move/Fight or Fight/Move Sequence
    • 5.5.1 Chinese Sequence Procedure
    • 5.5.2 Japanese Sequence Procedure
    • 5.6 GT 8 Japanese Breakout
    • 5.7 Ending GTs
  • 6.0 Stacking
    • 6.1 Japanese Stacking Limits
    • 6.2 Chinese Stacking
    • 6.3 Fog of War
  • 7.0 Zones of Control (ZOC)
    • 7.1 Enemy Zones of Control (EZOC) & Movement
    • 7.2 EZOC & Advance After Combat
    • 7.3 Negating Chinese ZOC
  • 8.0 Movement
    • 8.1 Stack Movement
    • 8.2 Minimum Movement
    • 8.3 Terrain & Japanese Movement
    • 8.4 Terrain & Chinese Movement
  • 9.0 Combat
    • 9.1 Combat Procedure
    • 9.2 Organizational Restrictions
    • 9.3 Japanese Air & Artillery Support Markers
    • 9.4 Column Shifts
    • 9.5 Japanese Concentric Attack
    • 9.6 Grand Canal Hexsides
    • 9.7 Town & Town Center Hexes
    • 9.8 Final Combat Resolution
    • 9.9 Advance After Combat
    • 9.10 Japanese Momentum Attacks
    • 9.11 Japanese Flank Attacks