RulesPal
Chat
Rulebook
Symetra thumbnail

Symetra

Symetra Rulebook

Table of Contents

Table of Contents

  • About
  • Quick Start
  • 1.0 Physical Components
    • 1.1 In the Box
    • 1.2 Nice to Have
  • 2.0 Setting Up
    • 2.1 Beads
    • 2.2 Cards
    • 2.3 Turns
  • 3.0 Areas of Play
    • 3.1 Cards
    • 3.2 Energy
  • 4.0 Cards & the Matrix
    • 4.1 Cards
    • 4.2 Type
    • 4.3 Polarity
    • 4.4 Affinity & Enmity
    • 4.5 Action
    • 4.6 Matrix
    • Parts of a Card
  • 5.0 Game Length
    • 5.1 Duration
    • 5.2 Turns, Rounds & Cycles
    • 5.3 Player Exit
  • 6.0 Winning
    • 6.1 Cycle Winners
    • 6.2 Game Winner
    • 6.3 End of Game Tie
  • 7.0 Stages of Play
    • 7.1 Setup
    • 7.2 Game Duration & Winner
    • 7.3 Start of Cycle
    • 7.4 Turn Order
    • 7.5 During your Turn
    • 7.6 End of Turn
    • 7.7 End of Round
    • 7.8 End of Cycle
    • 7.9 End of Game
  • 8.0 Actions
    • 8.1 Card Fusion
      • 8.1.1 Steps
      • 8.1.2 Conditions
    • 8.2 Card Charging
      • 8.2.1 Steps
      • 8.2.2 Conditions
    • 8.3 Card Actions
      • 8.3.1 Steps
      • 8.3.2 Conditions
    • 8.4 Re-Actions
    • 8.5 Chain Re-Actions
  • 9.0 Extras
    • 9.1 Strategic Advice
    • 9.2 Good Karma Rule
    • 9.3 Original Game Mode
    • 9.4 Draft Mode
    • 9.5 Team Mode
    • 9.6 Tournament System
    • 9.7 Rule Tweaks to Try
    • 9.8 Solitaire Mode
    • 9.9 A.I. Solitaire Mode
    • 9.10 Frequently Asked Questions
  • 10.0 Oracle Use
    • 10.1 Principles of Divination
    • 10.2 Meditation & Concentration
    • 10.3 Oracle Spreads
    • 10.4 Doing a Reading
  • Appendix I. Glossary
  • Appendix II. Rules Summary
    • Teaching Flow
    • Winning the Game
    • Setup
    • Any Time
    • Cycle
    • Round
    • Turn
    • Actions
    • Possible Actions & Re-Actions
    • Fuse a Card
    • Affinities & Enmities
    • Charge a Card
    • Use a Card
  • Quick Play Summary

About

Players: 1 to 6. Ages: 13 & up. Time: 20 to 120 minutes (depending on number of players).

Quick Start

Both sides of the back cover have game summaries and Section 7.0 Stages of Play has sequential play instructions. Refer to other sections as needed. You can also watch game overview and gameplay videos at gamepointcentral.com/games/symetra.

1.0 Physical Components

1.1 In the Box

Cards: There are 60 hexagon-shaped cards.

Beads: There are six colours of beads in sets of 50. Each player uses one set of a unique colour.

Rules: Comprehensive rule book.

1.2 Nice to Have

Flat Surface: A flat surface is recommended to easily arrange the hexagonal cards with beads.

Symetra Play Mat: We've created a printable playmat to help keep track of your actual and potential energy. The mat also includes some handy game tips. You can download the playmat from gamepointcentral.com/games/symetra.

Note-taking Aids: Barring a proficient memory, players may wish to record who wins each cycle in case it breaks a tie at the end of the game.

2.0 Setting Up

2.1 Beads

Colours: Each player chooses a colour and gets 50 beads of that colour.

Actual and Potential: Players divide their beads into an actual pool of 30 beads to their right and a potential pool of 20 beads to their left.

2.2 Cards

Designate a dealer who randomizes the deck and deals 3 cards to each player, starting with the player to the dealer's left and proceeding clockwise around the play area.

2.3 Turns

Turn Order: Players' turns proceed clockwise.

First Turn: To determine who goes first, each player in turn order after the dealer puts the top card of the deck into the discard and notes its cost (number on card). The player who reveals the card with the highest cost starts the first round. Any tied players should repeat the process.

Each following cycle, the next player in turn order to current starting player's left becomes the new starting player for the that cycle and takes their turn first.

3.0 Areas of Play

3.1 Cards

The 60 unique cards in SYMETRA represent the different elemental, emotional and energetic forces that exist in the Cosmos.

Deck: The face down pile of unused cards. If a deck ever has 0 cards, shuffle the discard back in and discard a card from the top for each player who draws from that deck.

Hands: Each player starts with 3 cards in hand. Keep your hand private. Any time a player has 0 cards in hand, they move 3 energy from their actual into their potential, and draw 2 cards.

Matrix: The collection of cards in the middle of the play area is called the matrix.

Discard: Put discarded cards in a pile face up.

3.2 Energy

Energy is represented by coloured beads. Each player has their own colour of bead, allowing one to easily see where their energy is and which cards they control.

Potential and Actual: Each player starts the game with 30 actual energy and 20 potential energy. Players separate these pools with their actual to their right and their potential to their left.

Zero Actual: If at any time a player has 0 energy left in their actual, then that player must leave the game. Their energy is removed from the game and their cards are put into the discard (unless playing the original game mode, in which case empty cards remain in the matrix).

Universal: The Universal holds the energy paid for actions and cycles, and excess card energy.

On Cards: Energy is used to charge cards. A card can only have one colour of bead on it at a time and the player whose energy is on the card is that card's controller. Cards have a maximum capacity of 5 energy. If at any time a card exceeds its capacity move the excess energy into the universal. If at any time a card has 0 energy on it put it into the discard.

4.0 Cards & the Matrix

4.1 Cards

There are 60 uniquely named hexagon-shaped cards.

4.2 Type

The three card types are identifiable by a distinct background and icon: Element (atom icon), Emotion (ring icon) or Energy (wheel icon).

4.3 Polarity

A card is positive (+), negative (−) or neutral (|).

4.4 Affinity & Enmity

Each card has affinity and/or enmity with other cards. All cards have at least one affinity but some cards have no enmities. In some cases, like emotion or promo cards, the affinity or enmity may only be listed on one of the cards so check both cards. It's advantageous to find one or more cards with an affinity or enmity to the card you're fusing into the matrix. (see Section 8.1 Card Fusion for details)

4.5 Action

Each card action has a cost and instructions. You must move the cost from the card into the universal before following the instructions. Each card action can be used only once per round. (see Section 8.3 Card Actions for details)

4.6 Matrix

The Matrix consists of all cards fused into play and the energy on them. Any time a card in the matrix has 0 energy on it, put it into the discard.

Empty Matrix: At the start of each cycle the matrix will be empty. It may be empty at other times too. When a player fuses the first card into an empty matrix they move 1 energy from their potential onto that card.

Parts of a Card

The callouts on the example card diagram explain each part of a card:

  • Name: There are 60 unique cards in SYMETRA.
  • Type: Type is shown by the background pattern and icon: Element, Emotion or Energy.
  • Polarity: Polarity is shown by the background colour and icon: Positive: white & +. Negative: black & −, or Neutral: grey & |.
  • Affinity: When you fuse a card to a card it has affinity with, move 1 energy from your potential onto the card you just fused into the matrix. Do this before you lock the card. When combining multiple decks, cards with the same name also have affinity.
  • Enmity: When you fuse a card to a card it has enmity with, move 1 energy from the card already in the matrix into its controller's potential. When you fuse 2 cards you control with enmity, move 1 energy from your potential onto each card. Do this before you lock the card.
  • Cost: Move this amount of energy from this card into the universal when you use this card's action.
  • Action: Card Actions have a cost and instructions (see Section 8.0 Actions for details).

5.0 Game Length

5.1 Duration

A game takes 20 to 120 minutes depending on the number of players and game mode being played.

5.2 Turns, Rounds & Cycles

Turns per Round: In a round each player has exactly one turn — so three players would need three turns to complete one round.

Rounds per Cycle: Each cycle has three rounds.

Cycles per Game: For three to six players, a game lasts as many cycles as players: three players, three cycles; four players, four cycles; five players, five cycles; six players, six cycles. A two-player game lasts four cycles.

Recap: To sum up, each player gets one turn per round, three rounds make up a cycle, and one cycle per player completes a game (except for a two player game, which has four cycles).

Order of Play (3 players): Game setup, then cycles, then game winner. Each cycle has three rounds, and each round has a turn order. In cycle 1 the turn order is 1 2 3 for each of its three rounds; in cycle 2 it is 2 3 1; in cycle 3 it is 3 1 2.

Number of Players and Cycles: Players 1 2 — Cycles 1 2 3 4. Players 1 2 3 — Cycles 1 2 3. Players 1 2 3 4 — Cycles 1 2 3 4. Players 1 2 3 4 5 — Cycles 1 2 3 4 5. Players 1 2 3 4 5 6 — Cycles 1 2 3 4 5 6. Always 3 rounds per cycle.

5.3 Player Exit

Start of Cycle: A player must have four energy in their actual at the start of each cycle. If not, that player leaves the game. Their energy is removed from the game and their cards are put into the discard.

Zero Actual: If at any time a player's actual pool is empty then that player must leave the game. Their energy is removed from the game and their cards are put into the discard.

Players exiting the game will not change the total number of cycles to be played as previously determined during setup.

6.0 Winning

6.1 Cycle Winners

Each player who has the most energy on their cards at the end of a cycle wins that cycle. Winning a cycle is worthwhile, but it is possible to win the game without winning cycles.

Each winner moves their energy from the universal into their actual. Each other player moves their energy from the universal into their potential. Each player then moves all the energy on all their cards into their actual and all cards are put into the discard.

6.2 Game Winner

The last player in the game or the player who has the most actual energy after the end of the final cycle wins the game.

6.3 End of Game Tie

In the event of a tie the winner will be the tied player who won the most cycles. If there are still tied players, the winner will be the tied player with the most cards in hand. If there are still tied players after that, the tied players (and only the tied players) will play another cycle.

7.0 Stages of Play

7.1 Setup

Beads: Each player chooses a colour of 50 energy beads and divides them into 30 actual energy to their right and 20 potential energy to their left.

Cards: Play area includes a face-down deck of cards, a discard pile, and an area for the matrix of cards in play.

First Hand: Designate a dealer who randomizes the deck and deals 3 cards to each player starting with the player to the dealer's left and proceeding clockwise.

First Turn: To determine who goes first, each player in turn order after the dealer puts the top card of the deck into the discard and notes its cost (number on card). The player who reveals the card with the highest cost starts the first round. Any players who are tied repeat the process.

Each following cycle, the next player in turn order starts the first round.

Turn Order: Players' turns proceed clockwise.

7.2 Game Duration & Winner

Length of Game: Each player has exactly one turn (in turn order). This makes up a round. Three rounds make up a cycle. For three to six players, total cycles equals total players. For two players there are four cycles.

Goal: Your goal is to move as much energy from your potential into your actual. The player with the highest number of actual energy is the winner. Alternatively, if you're the only player still in the game you are the winner. (see Section 8.0 Winning for details)

Zero Actual: If at any time a player's actual pool is empty then that player must leave the game. Their energy is removed from the game and their cards are put into the discard.

7.3 Start of Cycle

Actual to Universal: At the start of each cycle each player moves 3 energy from their actual into the universal.

7.4 Turn Order

Turn order proceeds clockwise and each player has one turn per round.

First Turn of Cycle: The first player in the first round of the first cycle was chosen in setup (Section 7.1). At the start of later cycles the first player is the player next in turn order.

7.5 During your Turn

During your turn you have 2 player actions (card fusing and charging) and your card actions that you may use once each in any order, or not at all. These actions can be re-acted to and used as re-actions. (see Section 8.0 Actions for details)

Fuse a Card: Select a card from your hand and put it in front of you face up, check for re-actions, fuse the card into an empty space connected to the matrix, check for affinities and/or enmities, and lock it with 1 energy from your actual. The first card fused into an empty matrix receives 1 energy from its controller's potential.

Charge a Card: Select 1 to 3 energy from your actual and put it in front of you, check for re-actions, and move the selected energy onto 1 card you control. Cards have a capacity of 5 energy. Move any extra energy into the universal.

Use a Card Action: Announce the action and any initial selections it requires, check for re-actions, re-check the initial selections to make sure they are still valid, pay the cost from the card into the universal, and follow the action's instructions. Each card action can be used once per round.

Holding Back: Do not feel obliged to fuse or charge a card. It may be in your interest to do nothing if you don't think you can win the cycle. This gives you more card options for later and keeps your energy safe in your actual.

Re-Actions: If it's not your turn, you may re-act to an action/re-action with a card action you have in the matrix.

No Re-Actions without Action: Only a player whose turn it is can initiate an action. If they use no actions, there can be no re-actions from other players.

7.6 End of Turn

At the end of your turn draw a card. Drawing this card is not an action and cannot be re-acted to.

7.7 End of Round

Final Actions/Re-Actions: Each player, in turn order, has a last chance to use their card actions. Actions and re-actions continue until all players decline to take further action.

7.8 End of Cycle

Cycle Winners: Each player who has the most energy on cards they control at the end of a cycle wins that cycle. Each winner moves their energy from the universal into their actual. Each other player moves their energy from the universal into their potential.

Clearing the Matrix: Each player then moves all the energy on all their cards into their actual and all cards are put into the discard.

Significance: The player who wins the most cycles won't necessarily be the winner of the game although winning a cycle suggests a player is doing well. The number of cycles each player has won is good to know in case you need to break a tie at the end of the game.

7.9 End of Game

Game Winner: The last player in the game, or the player who has the most actual energy after the end of the final cycle wins the game.

In the event of a tie the winner will be the tied player who won the most cycles. If there are still tied players, the winner will be the tied player with the most cards in hand. If there are still tied players after that, the tied players (and only the tied players) will play another cycle.

8.0 Actions

During your turn you have 2 player actions (card fusing and charging) and your card actions that you may use once each in any order, or not at all.

Actions can be re-acted to and used as re-actions (see Section 8.4). You can use card actions as re-actions during other players' turns but each card action can still only be used once per round.

8.1 Card Fusion

During your turn you may attempt to add one (and only one) of the cards in your hand to the matrix.

8.1.1 Steps

  1. Select a card from your hand and place it in front of you face up.
  2. Check for re-actions (see Section 8.4).
  3. Fuse the card into an empty space connected to at least one card in the matrix.
  4. Check each adjacent card separately for affinities and/or enmities (see below for details).
  5. Lock the card with 1 energy from your actual.

8.1.2 Conditions

All steps are mandatory. If any affinities or enmities are missed and the game has moved on, they do not come into effect.

Empty Matrix: At the start of each cycle the matrix will be empty. It may be empty at other times too. When a player fuses the first card into an empty matrix they move 1 energy from their potential onto that card.

Affinity: When you fuse a card to a card it has affinity with, move 1 energy from your potential onto the card you just fused into the matrix.

Enmity: When you fuse a card to another player's card it has enmity with, move 1 energy from the other player's card into their potential. When you fuse a card to another card you control it has enmity with, move 1 energy from your potential onto both cards.

Multiple Affinities and Enmities: You can fuse a card adjacent to some combination of cards it has affinity and/or enmity with, and then follow the rules for each card combination individually. If a card reaches it capacity before locking, move the 1 energy from the lock into the universal.

Only check for affinity and enmity when first fusing a card into the matrix, never when a card is moved around the matrix by a card action.

Emotion Cards: Emotions have affinity with entire polarities of cards. When you fuse a card to an emotion card of the same polarity, the card you are fusing has affinity. Element and energy cards have affinity with all emotion cards of the same polarity, even though it is only written on the emotion card.

8.2 Card Charging

During your turn you may attempt to add energy to one (and only one) of your cards in the matrix.

8.2.1 Steps

  1. Select 1 to 3 energy from your actual and place it in front of you.
  2. Check for re-actions (see Section 8.4).
  3. Move the energy onto 1 card you control.

8.2.2 Conditions

Capacity: Cards have a maximum capacity of 5 energy. Move any extra energy into the universal.

8.3 Card Actions

During the round you may attempt to use each card action you control once (and only once) at any time during your turn, and as a re-action when it is not your turn.

Card Actions have a cost and instructions.

8.3.1 Steps

  1. Announce the card action and make any selections it requires.
  2. Check for re-actions (see Section 8.4).
  3. Re-check the selections to make sure they are still valid, and that the player and card are still allowed to use the action (see Section 8.3.2).
  4. Move the cost from the energy on the card into the universal.
  5. Follow the action's instructions. Do this step even if the card has been discarded due to having 0 energy after paying its cost.

8.3.2 Conditions

In the Matrix: To use a card's action you must control the card in the matrix.

Cost: A card action has a cost (the number printed on the card) which you must move from the card into the universal in order to use the action. If a card does not have enough energy to pay for its action, at either step 1 or 4, then that action cannot be used and is cancelled (see Section 8.6).

Selections: The original cards or players you selected may have changed since your initial selection due to re-actions. This may affect how the action plays out, if at all (see Section 8.6).

If a card action uses another card's action, it does not count towards using that card's action once per round. That card's controller may also use that card's action this round.

If a card switches controllers, the new controller may also use that card's action this round.

If two card's actions contradict each other, which is normal for cards with enmity, the most recently completed action takes precedence.

8.4 Re-Actions

A re-action is any action that is used during step 2 of another player or card action, including one of your own.

After a player announces an action and selections there is an opportunity for each player, in turn order after the player who initiated the action, to announce a re-action. The re-action happens first.

The player who re-acted pays the cost from their card into the universal, and follows their action's instructions. After that, the first player completes steps 3 to 5 of their action.

You can use card actions as re-actions during other players' turns but each card action can still only be used once per round.

The 2 player actions you have during your turn, card fusing and charging, can be re-acted to and used as re-actions but only during your turn.

8.5 Chain Re-Actions

A chain re-action occurs when a player re-acts to another player's re-action. Keep adding re-actions to the chain re-action, in turn order after each player's re-action, until all players decline to re-act, and then the chain re-action explodes!

Last In, First Out: The chain re-action proceeds from the last announced re-action to the first announced action. As each action happens, its controller re-checks selections and allowances, pays the cost from the card into the universal, and follows their action's instructions.

Players may have multiple actions in a chain re-action, but each action can only be used once.

8.6 Cancelled Actions

A cancelled action is an announced action that cannot be completed. When an action is cancelled it cannot be used again during the same round.

An action may be cancelled because:

  • A card action prevents it.
  • A selection has become invalid because the selection has left the game, has been moved and is no longer fused to the card, or is being protected by another card's action.
  • The full cost of the action cannot be paid.
  • The card itself is no longer in the matrix.
  • The player who announced the action is no longer in the game.

9.0 Extras

Due to Symetra's uniqueness, new players do not have their usual reference to a similar game experience from which to draw upon to help them pick up the game quickly and easily (like at a Convention for example). We created the base game mode as a fast way to teach and learn the basics of but Symetra is meant to be played with a few more layers of game rules.

It goes without saying that the 'Original Game Mode 9.3' is Symetra at its best. Players have more time to set up intricate strategies, tactics and combos.

The 'Good Karma Rule 9.2' is also meant to be a permanent rule that creates interesting diplomatic and strategic options for players who draw and use positive cards.

I would say that the ultimate game mode combination is: team draft in original game mode with the good karma rule and no cycle limit (play until there is only 1 player or team left). Enjoy!

9.1 Strategic Advice

Fuse your cards to multiple cards that it has affinity and/or enmity with, lock it, use its action, and then charge it. This can allow you to get the benefit of the action while still having your card at maximum capacity.

Each card's action has times when they are best used. Try different ways of using a card, both offensive and defensive.

One can win the game without winning a cycle.

9.2 Good Karma Rule

I recommend permanently implementing this rule as soon as you are ready, as Symetra was meant to allow players to use beneficial card actions on other players and still be competitive.

There are currently 10 positive cards that have been designated as 100% 'Good Karma Cards': Compassion, Courage, Hope, Innocence, Light, Order, Passion, Sound, Transcendence & Vigor. These 10 cards are positive cards that select other players or their cards, and that cannot be karmically abused as the effect of the card can always be fulfilled.

When any of these cards are used to select an opposing player, or their cards, the controller of the 'Good Karma Card' moves energy from their potential into their actual equal to the final cost paid for the action plus 1. This includes any modifications to the cost shown on the card. Good karma only works on opponents, not teammates.

For example, if a player used the Light card on an opponent, paying the 1 energy cost and selecting them to draw a card, Light's controller moves 2 energy (1 cost + 1 karma bonus) from their potential into their actual. If the Light player had the Depression card used on them this round, making all their card actions cost 1 extra energy, the Light player would move 3 energy (2 cost +1 karma bonus) from their potential into their actual.

If you are using this rule, you should grant the good karma bonus to any player who uses a card action on an opponent or their cards that benefits them. Use democracy and common sense to determine whether the action is beneficial in that situation.

9.3 Original Game Mode

Cards with no energy on them remain in the matrix instead of being discarded. At the end of cycles, energy withdrawal from cards proceeds in turn order, is optional, and can be of any amount.

Players may use their charge action to move 1 to 3 energy from one card they control to a fused empty card or a fused card they control.

To count the cycles and rounds, mark the starting player with a die and use it to count the rounds.

9.4 Draft Mode

In draft mode you shape your strategy by choosing the cards you will use as your own deck and discard. Look for your favourite cards that suit your play style, for powerful card combinations that have card actions that work well together, and/or have affinity or enmity with each other.

Drafting: Deal out randomized packs to each player: 3 packs of 6 cards for 2 or 3 players, 3 packs of 5 for 4 players, 2 packs of 6 cards for 5 players, and 1 pack of 10 for 6 players. If you have extra cards or decks deal out 3 packs of 6 for 4 or 5 players, and 2 packs of 9 for 6 players.

Each player selects a card from their first pack, places it face down in front of them, and passes the rest to their left. Repeat until all cards have been selected. Repeat this process with the remaining packs, reversing the direction you pass the extra cards each pack. Players may view their cards as they draft. Each player uses the cards they selected as their private deck. Play with any other game modes as normal.

If a card says 'the' deck or discard read it as 'their' deck or discard. If a card says 'any' deck or discard, any players' deck or discard are valid.

If a player's deck ever runs out of cards, shuffle their discard back in, and put a card from the top into their discard.

9.5 Team Mode

SYMETRA is great fun in teams of 2 or 3 players. Amazing card combinations become possible when working together!

In Team Mode, the team with the most combined energy in their actuals wins the game.

Team mode works with any other game modes.

There are 2 Team Modes: Blind and Shared.

Blind Team Mode: Team members sit across from each other, positioned so turns alternate between teams evenly. There is no sharing of hidden information, like content of hands, or private communication in Blind Team Mode.

Shared Team Mode: Team members sit beside each other, share their turn, and can share private information like the contents of their hands, strategies and tactics. Certain procedures like re-action checking and end of turn card drawing still happen in regular turn order clockwise around the play area.

When you fuse a card to another card a teammate controls that it has enmity with, both players move 1 energy from their potential onto their card.

Players still win and lose cycles individually.

Due to player discussion, allow extra play time for Shared Team Mode.

9.6 Tournament System

The best example of the tournament sytem is with 9 players, but the system can be adapted for any number of players as long as there are 3 more more players per game, with each game having equal players.

A tournament consists of 3 stages. Each stage has 3 separate games of 3 players each. Randomly decide which players play each other in the first stage.

The winner of each game receives 3 points and the runner up receives 1 point. All other players receive 0 points but their order of placement should be noted for tiebreaking purposes.

Play 2 more stages, grouping equal/close point players together each time, prioritizing pairing players together who have not played yet.

After the end of the 3rd stage, the player with the most points wins. In the event of a points tie, the player who placed higher when the tied players played against each other wins.

9.7 Rule Tweaks to Try

Have no cycle limit, play until there is only 1 player or team left.

Play more rounds per cycle. Try 4, 5 or 6 rounds. This allows you to create more card combinations.

Card actions can be used as many times per round as a player wants, but all costs must still be paid.

Change initial actual and potential amounts by alowing players to use multiple sets of beads. This is particularly fun with the Original Game Mode as this allows players to control more cards in the matrix. Keep the same ratio of 30 to 20 energy in the actual and potential.

Allow the 3 energy cycle cost to be optional and partial so that a player may pay 1 energy for each round they wish to participate in. Before their turn starts a player chooses if they want to use one of their rounds or not. If they do not, they skip their turn and do not draw a card. They may still use card re-actions and can still use card actions during the end of round phase.

9.8 Solitaire Mode

Set Up: Have at least 100 energy beads ready. Shuffle the deck, and note the time.

Steps:

  1. Draw 3 cards.
  2. Fuse cards from your hand into the matrix next to at least one card that it has affinity or enmity with. Add 1 energy onto the card for each card fused to it that it has affinity with. For each card fused to it that it has enmity with, add 1 energy onto both cards. Note that emotions have affinity with entire polarities of cards.
  3. Discard any cards face down you do not play.

The first card you fuse into the empty matrix is your choice and receives 1 energy automatically.

Repeat steps 1 through 3 until the entire deck is gone, and note how long it took you. Then count up how many cards are in the matrix, and how much total energy are on all the cards.

Visit gamepointcentral.com to compare your scores with others. My best so far is 52 cards, 107 energy, 17 minutes.

Rules:

You cannot move a card after it has energy on it.

You cannot add energy onto a card after you have fused another card, even if it should have received more energy in the first place.

You cannot look through the discard.

9.9 A.I. Solitaire Mode

In A.I. Solitaire you play against 1 or more artificial opponents that start with an actual energy advantage and make their decisions randomly with dice or the best obvious play that you can see.

Run the game as normal but follow these rules:

  • A.I. opponents always go first.
  • A.I. opponents start with 40 actual energy and 10 potential energy.
  • A.I. opponents start with 3 cards in hand as normal and keep their hand face down.
  • A.I. opponents never use actions that will result in a net loss in energy before re-actions are resolved.
  • Always fuse their card in the space that yields the most total energy difference in affinities & enmities. If 2 or more spots are tied roll to decide.
  • If ever in doubt, choose the obvious best strategic choice, otherwise roll.
  • Normally a 6-sided die is sufficient but if you don't have the right number of sides on a die to match the number of options or group them evenly, choose the closest die with enough sides and disregard the extra numbers and reroll.
  • To choose which card the A.I. will fuse designate left to right on a 6-sided die: 1-2 = left card, 3-4 = middle card, 5-6 = right card.
  • Time and Mirror are the toughest cards for the A.I. to use and should be held as re-actions and used at the first opportunity.
  • Chaos, Transformation, Calm and Anger could be either beneficial or detrimental. For these cards randomly select targets between both the A.I. opponent and their cards, and you and your cards.
  • A.I. can work well with the 'Good Karma Rule 9.2' allowing you to open up their options with positive cards being used on you.

A.I. Opponent Turn Order:

  1. Fuse their card (except if they have Love or Hate in play then they use those card actions first). Designate a number for each card they have.
  2. Use all cards that won't be discarded by paying the cost. Choose best obvious order or random.
  3. Charge card with least amount of energy on it with the most amount of energy that doesn't exceed the capacity.
  4. Use remaining card actions, even if it causes them to be discarded.
  5. Draw their card and keep it face down.
  6. During the end of round phase A.I. opponents attempt to use any card actions they could not use earlier due to lack of valid selection or cost.

9.10 Frequently Asked Questions

When a card says it lasts 'until the end of the round' does this mean 1 full round from when it was used, or after the end of round phase ends and before the next round starts? All effects will end before the next round starts. The other option was the it was done in early testing but was changed as it was very difficult to keep track of. This way opens up the strategy of different cards being more optimally used near the beginning or end of round.

Why do Thought and Ether say 'any deck' in their actions' instructions? This is for draft mode where each player has their own deck. The controller of these cards can look at the top of any players deck, not just their own.

If Freedom or Ether use a card that can select itself by name, how does it work? If Freedom or Ether use a card action that refers to itself by name (like Space for example), the text now refers to Freedom or Ether instead of the original card.

How do Humility & Pride work? Normally at the end of each cycle the players who have the most total energy on cards they control in the matrix win their energy back from the universal. Humility reverses this so that the players who have the least total energy on cards they control in the matrix win their energy back from the universal. Pride's addendum reverses this back to normal. Note that each card moves energy to help towards that goal. Humilty moves a total of 2 energy from any number of cards you control. This could be 2 off one card or 1 off two different cards. Pride puts up to 4 total energy from your actual divided onto any number of cards you control. This could be 4 on one card, 1 each on four different cards, 1 on one card and 3 on another card, or any combination with up to 4 energy.

How do Sound & Silence and Movement & Stillness work? These are the card actions that give or take away the player actions: fusing cards and charging cards. Sound and Movement have addendums allowing them to be used even if the controller was selected by Silence or Stillness this round.

Transcendence, Transformation & Sustenance have two lines of affinty. Is this a typo? No, like Ether, Thought, Time & Space they have only affinities and no enmities. However, all the card names could not fit on one line so the enmity line was needed.

How do Innocence & Guilt work? Innocence & Guilt were the hardest cards to word. They basically make any player a magnet for positive or negative actions. So whenever any player is selected (not cards) the player selected with Innocence or Guilt are selected again by the action once for free. This extra action happens right after the original card action.

Why do the different card types (elements, emotions & energies) seem irrelevant? Emotion cards are important to note as they have affinity and/or enmity with entire polarities of cards. As for elements and energies, their distinction is important as Symetra is forward compatible with future games where elements and energies are handled differently. It also gives more suits when creating adaptations of traditional playing card games.

If a card action's cost is brought to 0 by another card's action can it be used for free? Absolutely! However you don't get energy back if it's below zero!

How do re-actions work? Re-actions are any action that is used as a re-action to another action being announced. The re-action happens first.

What can be used as re-actions? Re-actions are normally card actions that have been held to be used during another player's turn in response to something that player does. The 2 player actions can be used as re-actions during your turn.

When can I re-act? What can be re-acted to? After any action is announced (a card being fused, the amount of energy to be charged, or a card action and its selections) each player in turn order after the player who initiated the action gets an opportunity to re-act with their own action. This continues around the play area until all players decline to re-act and then the chain re-action explodes from the last announced action to the first. You can even re-act to your own action once the check gets back to you after going around the table.

If a card action is used can it also be used as a re-action during the same round? No. Each card you control can only be used once each round, either as an action on your turn or the end of round phase, or as a re-action during another player's turn.

In the base game mode, if a card such as Creation or Space refers to an adjacent empty space and the card is discarded after paying the cost, what are the valid space selections? You can select any space that was valid before the card was discarded. This is the way it works in original game mode where cards are not discarded when they have 0 energy.

If Sustenance or similar card has only enough energy to use the action and can select itself is it removed from play between paying the cost and gaining the energy back? Cards are immediately put into the discard when they have 0 energy on them in the basic game mode. So if Sustenance only had 1 energy on it when you pay the cost it would be discarded between steps 3 & 4 of the card action (see section 8.3.1) and therefore could not recharge itself. If you selected another card with Sustenance it would still happen as the selection is still valid.

To clarify this further with Sustenance specifically, even in the original game mode where cards remain in the matrix when they have 0 energy on them, Sustenance would still not be able to recharge itself because the action states that the card's 'controller' moves up to 3 of their energy from the universal onto the card, but as soon as the card has 0 energy on it, it no longer has a controller, and therefore no matching colour of bead to refill with.

10.0 Oracle Use

Symetra can also be used as an oracle deck for divinatory readings. You can use your game deck or acquire the oracle deck which has the same 60 cards, but with more art showing and oracle information rather than game information. The oracle guidebook comes with a lot more spreads and information on divination than shown here.

10.1 Principles of Divination

Purpose: Divination has been used for millennia by seekers of truth and spiritual knowledge to awaken their intuition and receive guidance and insight from higher planes of consciousness.

With this new knowledge, combined with their reason and experience, they are able to alter their path and improve many aspects of their life.

Destiny and Free Will: Consider that both destiny and free will exist. Without conscious intervention you are on a set path, your destiny, but with an informed free will, you can make a different choice, walk a different path.

Divination gives you a fresh perspective, revealing possibilities and opportunities that were previously hidden, empowering you to Shape Your Fate!

Holographic Universe: This concept proposes that all the information of the universe, past, present and future, is contained within the quantum field, connected to all particles.

It is possible to access this information by using meditative practices to tune one's mind to different people, ideas or events.

10.2 Meditation & Concentration

Meditation is a state of mind without active thought. When one's mind is clear and quiet, one is able to receive information from intuitive sources normally drowned out one's active mind. However, before having no thought, one must first go from many thoughts to one thought. This is called concentration.

In order to achieve concentration, one focuses on a technique conducive to meditation. The most common form of meditation involves witnessing one's breath while being aware of any thoughts, feelings and sensations that arise.

You can do this with your eyes closed, or use the cards, either the front or back, which have been designed to be used as a pattern with a centre point to focus upon for meditative purposes.

Gently close your eyes, or stare at a card with a soft, relaxed gaze. As you inhale, become energized and aware. As you exhale, feel yourself relax deeper and deeper. First feel all the tension in your body melt away. Then allow all unnecessary thoughts and feelings to leave your mind.

If thoughts or feelings arise during meditation, do not focus on them. Instead let them arise naturally in their related chains until they putter out, float away or pass through you.

Continue until you slip from active, singular thought concentration into meditation without active thought. You should now feel calm, open and ready to receive the wisdom of the reading.

10.3 Oracle Spreads

A spread is an arrangement of cards. Each position in a spread's layout represents an aspect of life or a period of time.

Flower of Life: This is the main spread used with Symetra. It covers most areas and aspects of life, although it may be used for more specific topics.

Lay out the cards face down in numerical order, 1 through 6, followed by the 7th, central card face up. Interpret the 7th, Cosmic card by itself, and then proceed to reveal and interpret the cards in numercial order 1 through 6. As you flip over each card, interpret it on its own, in relationship to the central, Cosmic card, and to any other cards next to it in the spread.

1 = Physical Health, 2 = Emotional Feelings, 3 = Wealth & Home, 4 = Relationships & Romance, 5 = Creativity & Career, 6 = Spirituality & Purpose, and 7 = Cosmic Source.

(The printed spread diagram shows seven hexagonal cards: positions 1 to 6 arranged around the central position 7.)

Possibilities: The possibility words at the bottom of the card are there to spark intuition and give extra meaning to the card, with the bottom, boldest word holding the most weight. These words illustrate possible ways that the card may show up in life, and help you flesh out how it relates to the reading.

Fused Cards: Fused cards affect each other by strengthening or weakening, supporting or opposing, causing cards to be well or ill dignified. This leads to a narrowing down of the relevant possibilities. Fused cards with affinity or enmity affect each other more than cards that do not.

Affinity & Enmity: When you have cards in a spread that have affinity with each other, they strengthen and support each other, increasing their power, especially if they are fused.

When you have cards in a spread that have enmity with each other, they weaken and oppose each other, decreasing their power, especially if they are fused.

Polarity: Polarity determines how a card operates in nature and behaves with other cards.

Positive cards build up, expand, grow and keep things going and flourishing. They represent friends, new options, support, assistance, victory and celebration.

Negative cards break down, contract, hinder, destroy, challenge and change. They represent rivals, stagnation, energy-draining situations, poor habits and obstacles.

Neutral cards interact with other cards in a less direct manner than positive and negative cards. They represent balance, equality, impartiality, acceptance, stability, tools and things to focus on.

Type: The three card types represent different parts of our world.

Element cards represent physical and material actions, objects and environments.

Emotion cards represent feelings, psychical phenomena, people and ways of being. Emotions fuel action or inaction in other realms.

Energy cards represent patterns, transitions, states and cycles of nature in and around us.

Spread Totals: You can get a sense of the overall atmosphere and patterns that permeate and dominate the reading by comparing the card totals for each category.

Count the number of cards in each category: Affinities and Enmities; Positive, Negative and Neutral Polarities; and Element, Emotion and Energy card types.

10.4 Doing a Reading

Here are the steps for doing a reading.

  1. Meditation: Enter a state of meditation so that you are calm, aware, receptive and in tune with your intuition. See Section 10.2 Meditation.
  2. Preparation: Shuffle and cut the cards in whatever ways you wish. If you are doing a reading for someone else you should get them to shuffle and/or cut the deck as well.
  3. Spread: Proceed to lay out, reveal and interpret the cards as described in Section 10.3.
  4. Interpretation: Here are some guidelines on how to interpret the cards and spreads based on different factors.

Name: What does this card mean literally, and to you personally? Does its teaching become immediately apparent to you?

Appendix I. Glossary

Keyword [section #]: definition and explanations.

Action [8.0]: When you do something in Symetra it is called an action. There are 2 types of actions: player actions and card actions. Player actions can only be done during your turn, where as card actions can be used as re-actions during other players' turns and used during the end of round phase in addition to being used during your turn.

Action (player) [8.1 & 8.2]: See Player Action below.

Action (card) [8.3]: See Card Action below.

Actual [3.2]: Each player starts with 30 actual energy on their right. Actual energy represents your in-play energy and is the win condition of the game. Use cards to actualize potential energy. If at any time a player has 0 energy left in their actual, then that player must leave the game.

Affinity [8.1]: These are cards that have a supportive relationship with each other. When you fuse a card next to a card it has affinity with, move 1 energy from your potential onto the card you just fused into the matrix.

Cancelled Actions [8.6]: A cancelled action is an announced action that cannot be completed.

Capacity [3.2]: Cards have a maximum capacity of 5 energy. If at any time a card exceeds its capacity, move the excess energy into the universal.

Card [4.0]: Cards represent computer devices that give the user access to the elements, emotions & energies of the Cosmos at a quantum level. Players usually have 3 cards in hand and fuse 1 into the matrix during their turn.

Card Action [8.3]: Each card has a unique action that affects the game. Pay the cost from the card into the universal and then follow the instructions.

Charge [8.2]: Charging is a player action where you move 1 to 3 energy from your actual on to 1 card you control in the matrix. In the original game mode you can also use your charge action to move 1 to 3 energy from 1 card you control in the matrix onto a fused card you control or a fused empty card.

Control [3.2]: The player whose energy is on a card is that card's controller.

Cost [4.5]: The cost of a card's action is the number shown on the card. The cost is paid off the card into the universal before the instructions are completed.

Cycle [5.2]: Symetra game flow proceeds in cycles. Each cycle consists of 3 rounds, and each round consists of each player have 1 turn. Play as many cycles as there are players at the start of the game, except 2 players play 4 cycles.

Deck [3.1]: The deck is the face down pile of unused cards. If a deck ever has 0 cards, shuffle the discard back in and discard a card from the top for each player who draws from that deck.

Discard [3.1]: All cards discarded by card actions, determining the starting player, and end of cycle clearing are put in a pile face up.

Element [4.2]: See Type below.

Emotion [4.2]: See Type below.

Energy (card type) [4.2]: See Type below.

Energy (counter) [3.2]: Energy is represented by coloured beads. Each player has their own colour of beads, allowing one to easily see where their energy is and which cards they control. Each player starts with 30 actual energy (which is the win condition) and 20 potential energy. If at any time a player has 0 energy in their actual that player leaves the game.

Enmity [8.1]: These are cards that have an oppositional relationship with each other. When you fuse a card next to a card you don't control that it has Enmity with, move 1 energy from that card into its controller's potential. When you fuse a card next to a card you control that it has Enmity with, move 1 energy from your potential onto both cards.

Fuse [8.1]: Fusing is a player action where you put 1 card from your hand into the matrix, check each adjacent card for affinities & enmities, and lock it with 1 energy from your actual.

Hand [3.1]: Each player starts with 3 cards in hand. Keep your hand private. Any time a player has 0 cards in hand, they move 3 energy from their actual into their potential, and draw 2 cards.

Instructions (card action) [8.3]: Each card action has instructions that describe how that action works in the game. After you pay the cost from the card into the universal follow the card's instructions.

Matrix [4.6]: The Matrix consists of all cards fused into play and the energy on them. Any time a card in the matrix has 0 energy on it put it into the discard.

Negative [4.3]: See Polarity below.

Neutral [4.3]: See Polarity below.

Player Action [8.1 & 8.2]: There are 2 different player actions: fusing a card (from your hand into the matrix) and charging a card (you control in the matrix with energy from your actual). You can use each player action once per round and only during your turn. Player actions can be used as re-actions.

Polarity [4.3]: Polarity is shown by the background colour and icon: Positive: white & +, Negative: black & −, or Neutral: grey & |.

Postive [4.3]: See Polarity above.

Potential [3.2]: Each player starts with 20 potential energy on their left. Potential energy represents your extra, out-of-play energy that you can actualize by using card affinities, enmities & actions.

Round [5.2]: Each round consists of each player have 1 turn. There are 3 rounds per cycle.

Selection [8.0]: Most actions require 1 or more selections that are announced during step 1 of an action. If a selection becomes invalid while resloving re-actions during step 2, the action is cancelled.

Turn [7.5]: During a round each player has 1 turn. During your turn you may fuse a card, charge a card and use yoru card actions in any order or not at all. Draw a card at the end of your turn.

Type (card) [4.2]: The three card types are identifiable by a distinct background and icon: Element (atom icon), Emotion (ring icon) or Energy (wheel icon).

Universal [3.2]: The universal holds the energy paid for actions & cycles, and excess card energy beyond the capacity. At the end of each cycle, each player with the most energy on their cards in the matrix wins their energy back from the unviersal into their actual. Each other player loses their energy from the universal into their potential.

Appendix II. Rules Summary

Teaching Flow

  1. Card game where glass beads represent energy
  2. Game setup: 30 actual, 20 potential & 3 cards
  3. Cycle cost, universal, 1st player & discard
  4. Cycle win is most energy on cards, gets energy from universal to actual; game win is actual energy
  5. Cycles/rounds/turns/end of round phase
  6. 3 actions: fusing, charging & using cards
  7. Card explanations: name, polarity, affinities, enmities, action, cost & capacity.
  8. Re-actions and chain re-actions.

Winning the Game

Game winner is player with most energy in actual, ties go to most cycles won, then most cards in hand, if still tied, tied players play another cycle.

Setup

  1. Each player takes 50 beads of a colour and divides them into 30 actual on their right and 20 potential on their left.
  2. Randomize deck and deal 3 cards to each player.
  3. In turn order after the dealer, each player flips the top card of the deck into the discard, highest cost indicates starting player, tied players repeat the process.
  • Turn order moves clockwise after starting player.
  • Play as many cycles as there are players at the start of the game, except 2 players play 4 cycles.

Any Time

  • Player with 0 actual is eliminated, energy is removed and cards are discarded.
  • Player with 0 cards in hand moves 3 energy from actual into potential and draws 2 cards.
  • Deck with 0 cards, reshuffle deck and put 1 card from the top into the discard for each player drawing from that deck.
  • Card in matrix with 0 energy is discarded (still complete card action if energy cost was just paid).
  • Move energy on card in excess of capacity into universal (capacity is normally 5).

Cycle

  1. Each player moves 3 energy from their actual into the universal.
  2. Play 3 rounds.
  3. Cycle winners are each player with the most energy on cards they control in the matrix.
  4. Winner(s) move their energy from universal into their actual, others move their energy from universal into their potential.
  5. Move energy on cards into actual.
  6. Discard all cards.
  7. Player to starting player's left becomes new starting player.

Round

  1. Each player takes 1 turn.
  2. End of round phase: each player may use remaining card actions/re-actions in turn order until all players pass (no player actions).

Turn

  1. Use actions in any order or not at all.
  2. Draw a card at the end of your turn.

Actions

  1. Announce action.
  2. Check for re-actions in turn order.
  3. Resolve re-actions last in, first out.
  • Actions announced later can cancel actions announced earlier.

Possible Actions & Re-Actions

  1. Fuse a card from your hand into the matrix, once per round only, player taking current turn only.
  2. Charge a card in the matrix with 1-3 energy from your actual, once per round only, player taking current turn only.
  3. Use a card action by paying cost from card into universal, once per card per round.

Fuse a Card

  1. Announce card.
  2. Check for re-actions. 3a) If matrix is empty, place card in middle of table & move 1 energy from your potential onto the card. 3b) If matrix has cards, place card adjacent on at least 1 side to a card already in the matrix.
  3. Separately for each adjacent card, check the pair for affinities and/or enmities (see below).
  4. Lock the card by moving 1 energy from your actual onto card being fused.

Affinities & Enmities

  • When fusing a card adjacent to a card with affinity, move 1 energy from your potential onto the card being fused.
  • When fusing a card adjacent to a card you control with enmity, move 1 energy from your potential onto the card being fused & onto the adjacent card already in the matrix.
  • When fusing a card adjacent to a card you don't control with enmity, move 1 energy from the adjacent card already in the matrix into its controller's potential.

Charge a Card

  1. Announce how much energy you will use from your actual (1 to 3).
  2. Check for re-actions.
  3. Move selected amount of energy from your actual onto a single card you control in the matrix.

Use a Card

  1. Announce card and any selections.
  2. Check for re-actions.
  3. Check if still valid (cannot use again this round either way).
  4. Move cost from card into universal.
  5. Follow card instructions (even if paying cost caused it to be discarded).

Energy Movement Summary

  • Cycle Cost: actual to universal
  • Affinity: potential to card
  • Enmity you Control: potential to both cards
  • Enmity you don't Control: card to potential
  • Lock a Card: actual to card
  • Charge a Card: actual to card
  • Card Action Cost: card to universal
  • Win a Cycle: universal to actual
  • Lose a Cycle: universal to potential

Quick Play Summary

Setup: Each player starts with 30 actual energy, 20 potential energy, and 3 cards in their hand.

Game Duration: Each player has exactly one turn in a round. Three rounds make up a cycle. For three to six players, total cycles equals total players. For two players there are four cycles.

Start of Cycle: At the start of each cycle each player moves 3 actual energy into the universal.

Turn Order: Proceeds clockwise around table. To determine who goes first, each player in turn order after the dealer puts the top card of the deck into the discard and notes its cost. The player who reveals the card with the highest cost starts the first round.

During your Turn: You may fuse 1 card from your hand into the matrix and lock it with 1 actual energy, charge 1 card you control in the matrix with 1 to 3 actual energy, and use any card actions you have in the matrix.

End of Turn: Draw a card.

End of Round: Each player, in turn order, has a last chance to use their card actions.

End of Cycle: Each player who has the most energy on their cards wins. Each winner moves their energy from the universal into their actual. Each other player moves their energy from the universal into their potential. Each player moves all the energy on all their cards into their actual and all cards are put into the discard.

End of Game: The last player, or the player with the most actual energy wins.

(The Quick Play Summary page also carries an Order of Play diagram, a Parts of a Card diagram, an Areas of Play diagram and an Energy Movement Summary. Their content is covered by Sections 3.0, 4.0 and Appendix II above.)

8.6 Cancelled Actions
  • Energy Movement Summary