Stalingrad Relief: December 1942 thumbnail

Stalingrad Relief: December 1942

Stalingrad Relief: December 1942 Rulebook

Table of Contents

Table of Contents

2.0 Components

A complete game of Stalingrad Relief includes a 22x34-inch game map, rules set, and 176 5/8-inch counters. Players must provide a six-sided die (1d6) to resolve combat and other random game events.

2.1 Map

The game map portrays the area of southern Russia over which the actual scenario was conducted, including all terrain significant to that battle. A hexagonal (hex) grid superimposed over the terrain features regulates movement and the positioning of the playing pieces (counters).

The game map includes the Terrain Effects Chart (TEC) and Key, Game Turn Record Track, Supply Effects Chart, Combat Results Table, and Combat Shifts Summary Chart.

2.2 Scale

Game scale is 3-5 miles (5-8 km) per hex. Each game turn is 2 days. Most units are German regiments and brigades, Romanian divisions and regiments, and Soviet mechanized and tank brigades or infantry and cavalry divisions, with some specialized battalions and other formations included.

2.3 Counters

All units have their historical designation. One-step units and the reverse side of two-step units have a triangle in the upper left corner to indicate their last step. Most units also have a color in their unit type box corresponding to the HQ they are subordinate to and from which they draw combat and logistics support. Independent units have no color in their unit box and may trace supply to any HQ.

An "O" in the upper right corner of a unit indicates it is optional. Optional units are covered in the scenario rules (19.0).

  • A triangle in the upper left corner indicates the last step of the unit.
  • A blue attack strength in a white box indicates an armor combat shift (11.3.4).
  • A red defense strength in white box represents an anti-tank combat support shift (11.3.4).
  • A boxed movement allowance indicates the unit may move in the Mechanized Movement Phase (9.2).
  • Units with parenthesized strength have only defense strength and may not attack.

2.4 Unit Types

Unit Symbols: Armor; Cavalry; Infantry; Mechanized Infantry; Motorized Infantry; Artillery; Motorized Artillery; Self-Propelled Artillery; Anti-Tank (AT) / Rocket; Engineer; Assault Engineers; Fortified Region / Headquarters (HQ); Heavy Armor.

Important: Heavy armor units are a subset of armor. All rules that apply to normal armor units also apply to heavy armor.

Markers: Leader; Air Support; Field Fort; Victory Point Marker; Game Turn Marker; Out of Supply (OoS) Marker; Bridge.

Unit Colors:

  • German: Gray-green with black lettering
  • Romanian: Blue with black lettering
  • Soviet: Brown with white lettering

Unit Sizes:

  • XXXX: Army
  • XXX: Corps
  • XX: Division
  • X: Brigade
  • III: Regiment
  • II: Battalion
  • KG: Kampfgruppe

2.5 Definitions

Rounding:

  1. Halved and Quartered Movement Allowance is rounded up.
  2. Total combat strength (not individual units) in an attack or defense rounds down to a minimum of one.
  3. Total combat shifts, after subtracting defensive shifts from attacker shifts, are rounded in favor of the defender to a minimum of one.

Control:

  1. A hex is controlled if it was on the friendly side of the front line at the beginning of the game, or a friendly unit was the last to occupy or pass through the hex (whether by movement or advance after combat).
  2. Once occupied or passed through, the hex remains friendly until an enemy unit establishes control by occupying it or passing through it.
  3. An Enemy Zone of Control (EZOC) is not sufficient to establish control, regardless of friendly occupation or vacancy.

3.0 How to Win

Victory is determined by accumulation of victory points achieved for occupying objectives and/or eliminating enemy units (17.0).

4.0 How to Set Up the Game

  • Players should choose the side each will command.
  • Each player should then place the units per the scenario set-up instructions.
  • Units received later in the scenario (reinforcements) are temporarily placed in the appropriate space on the Turn Record Track.
  • Play starts with the first game turn and continues until the final turn of the scenario being played.
  • The player that moves first sets up second.

5.0 Sequence of Play

  • Each game turn (GT) is composed of two player turns. The player whose player turn is in progress is called the phasing player.
  • Each GT proceeds in the following sequence, with each phase carried out in the order given.
  • The scenario rules state which player moves first each GT.
  • The first player conducts the following phases:
  1. Reinforcement: The player places any reinforcements on their entry hex/location.
  2. Supply: The player checks for HQ and units that cannot trace a Line of Supply (LoS) and places OoS markers on them. The player determines the supply status (Attack or General) for each HQ, adjusting it per scenario rules.
  3. Initial Movement: The player moves any or all his units, including reinforcements, in accordance with the rules governing movement. He may conduct overruns if units are in attack supply. He may disengage units from Enemy Zones of Control (EZOCs). Terrain and weather may affect the cost to enter each hex on the map. All HQ may move in this phase (out of supply HQ move half their movement allowance).
  4. Combat: The player now may attack with as many units adjacent to an enemy hex as he wishes. Combat is not mandatory. Supply status is checked at the moment of combat and may be different than prior to initial movement. Full attack strength is only available to units in attack supply.
  5. Mechanized Movement: The player now may move all units with their movement allowance shown in a white box (2.3, 9.2). Supply status is checked at the beginning of the Mechanized Movement phase and may be different than prior phases. Eligible units may conduct Overruns and disengagement.
  • The second player then completes phases 1-5 for their units.
  • After both players have completed their player turns the following steps are taken:
  1. Players advance the game turn marker one box on the Turn Record Track to indicate the end of one GT and the beginning of the next turn.
  2. Once the last GT of the scenario has been completed, the game is over, and victory conditions are determined.

6.0 Reinforcements

Both sides may receive reinforcements during the game.

6.1 Procedure

  • Reinforcements are placed on a specific hex or map edge per the scenario rules.
  • They do not expend Movement Points (MP) for placement but do expend MP to move from a map edge or placement hex.
  • Reinforcements can be delayed but must enter at the same specified hex or map edge.
  • If a reinforcement cannot enter the map at the specified location or map edge due to enemy unit occupation, they are delayed. On the next GT, reinforcements for specific locations enter at the specific location if available, or the closest railroad (RR) hex to that location that can trace a path of RR hexes to a friendly map edge.
  • For map edge entry, the units enter on the closest friendly map edge hex (owner's choice if two hexes are equal distance).
  • All reinforcements may move their full movement allowance in the player's Initial Movement Phase. After that, they trace supply to their HQ and determine supply status based on their current situation (7.0).

6.2 Overstacking

  • Reinforcements may overstack in an on-map entry hex but must meet stacking limits by the end of the Initial Movement Phase.
  • Reinforcements entering on a map edge may overstack in the off-map area and must meet stacking limits by the end of the Initial Movement Phase.

7.0 Supply

Supply affects a unit's attack strength, defense strength, and movement allowance.

7.1 General

  • There are three levels of supply: attack, general, and out of supply (OoS).
  • During the Supply Phase, all the units of the active player are checked for supply status, and HQs are selected to provide attack supply.
  • In addition, units attacking or defending in a particular overrun or combat are checked at the instant of combat resolution. Supply is checked again at the beginning of the Mechanized Movement Phase.
  • Scenario rules establish limits on HQs being in attack or general supply as well as any special provisions or limitations applicable to specific battles (16.0).

7.2 Line of Supply (LoS)

  • LoS refers to a hex-by-hex trace from a specific combat unit or HQ to a supply source. Supply sources may be designated map edges, cities, or other locations specified in the scenario rules.
  • A LoS must be free of enemy units and EZOCs.
  • Friendly units negate EZOCs for the purposes of supply. Exception: Units with a printed defense factor of zero or a parenthesized combat factor do not negate EZOCs.
  • A LoS may not be traced through all-sea or lake hexes or hexsides.
  • A LoS may not be traced through swamp hexes unless traced along a road/railroad running through the hex. Exception: LoS may be traced through swamp hexes during winter weather GTs (16.3).

Editor's note: the printed cross-reference "(16.3)" points to the Division/Corps Integrity table, which contains no winter weather rule; no winter weather rule appears in the printed rules. Transcribed as printed.

  • Major rivers block general and attack supply lines unless there are road/railroad crossings or major city hexes adjacent to each other on both sides of the major river.
  • All Axis combat units have general supply if they can trace a LoS of any length to an Axis supply source. Axis units must trace to their corresponding HQ within range for attack supply.
  • All Soviet combat units must first trace their LoS to their corresponding Soviet HQ within the HQ range. The Soviet HQ then traces LoS of any length to a Soviet supply source. If a Soviet HQ cannot trace a LoS, it will not be able to project general or attack supply.
  • Soviet units unable to trace a LoS to their corresponding HQ are considered OoS.
  • HQ range is counted from the unit to the HQ not counting the hex the unit is in but counting the hex the HQ is in.
  • A maximum of six independent units may trace LoS to a single HQ per turn.

7.3 Out of Supply (OoS)

Out of Supply units, including HQs, are marked with an OoS marker and suffer the following effects:

  1. Movement allowance halved (rounded up).
  2. Cannot move during the Mechanized Movement Phase (5.0, 9.2).
  3. Cannot overrun.
  4. Attack at quarter strength (combat total quartered, not individual units).
  5. Defend at half strength (combat total halved, not individual units).
  6. Total combat shifts are quartered except for Division/Corps Integrity (DCI) (halved) and terrain (full) (10.2).
  • Supply status is determined at the moment of combat resolution, therefore a unit in attack or general supply in the Supply Phase may not be in supply at the moment of combat due to moving OoS or prior combats resulting in advances or retreats cutting LoS. The reverse is also true that a unit may move to a hex that is in general or attack supply.

7.4 General Supply

Units in general supply:

  1. Move their full printed movement allowance in the Initial Movement Phase,
  2. Move at a quarter of their movement allowance (rounded up) during the Mech Movement Phase (9.2),
  3. Cannot overrun,
  4. Attack at half strength (combat total halved, not individual units),
  5. Defend at full strength,
  6. All combat shifts are halved except for DCI and terrain (full in both cases),
  7. Only one combat may be initiated per turn per HQ in general supply,
  • Soviet units must have a LoS to a Soviet HQ in general supply to be in general supply.
  • A unit beginning a Movement Phase in general or attack supply may move to a position where it is OoS.
  • An Axis unit beginning a Movement Phase in Attack supply may move to a position where it is in general supply.

7.5 Attack Supply

Units in attack supply:

  1. Move their full printed movement allowance in the Initial Movement Phase,
  2. Move at half of their movement allowance (rounded up) during the Mech Movement Phase (9.2),
  3. Overrun at half strength (9.3),
  4. Attack at full strength,
  5. Defend at full strength,
  6. Full DCI shifts apply (10.2),
  7. Full combat support shifts apply (11.3).
  • Both Axis and Soviet units must be within range of a friendly HQ in attack supply to be in attack supply and to receive full HQ and Leader shifts (11.3.2).
  • HQ and Leader shifts are applied once per Combat Phase and may be split between different individual combats.

Example: When a HQ with a 2R shift and a Leader with a 1R shift are stacked together, it would be possible to apply 1R to three different combats in one Combat Phase, or all three could be applied to one combat.

  • Shifts may only be applied to units with the same HQ color (12.2).

8.0 Zones of Control

Zones of control (ZOC) reflect the ability of a unit to project combat power into surrounding hexes.

8.1 General

  • All units with a printed defense factor of 1 or greater exert a zone of control (ZOC) into the six adjacent hexes.
  • Units with a printed defense factor of 0 or a parenthesized defense factor do not exert a ZOC.

8.2 Guidelines

  • ZOC do not extend across major river hex sides or all-sea hex sides.
  • ZOC do not extend into city hexes but do extend out of those hexes.
  • There is no additional effect for having more than one unit exerting its ZOC into a given hex.
  • Hexes into which a unit exerts ZOC are termed ZOC hexes or EZOC (enemy ZOC) hexes.
  • Units must stop moving when they enter an EZOC unless conducting an overrun against the enemy unit exerting the EZOC (9.3).
  • There is no additional MP cost to enter an EZOC.
  • Units may leave an EZOC hex only under the following conditions:
  1. Overrun (9.3)
  2. Disengagement (9.4)
  3. Retreat or advance after combat (11.6, 11.7)
  • Friendly ZOC never affect friendly units.
  • Friendly units, other than those with zero defense strength or parenthesized strength, negate the presence of EZOC in the hex the friendly unit occupies for the purposes of:
  1. Tracing attack and general supply lines.
  2. Retreat after combat.

Important: Friendly units do not negate EZOC for purposes of movement.

9.0 Movement

During the Movement Phase, all, some or none of a player's units may be moved.

Important: The only form of combat that may occur during the Movement Phase is overrun (9.3).

9.1 Restrictions

  • Movement is calculated in terms of movement points (MP).
  • A unit expends MP of its total Movement Allowance (MA), as modified by its supply status, for each hex it enters based on terrain costs as summarized on the TEC.
  • A unit may never enter a hex containing an enemy unit. Exception: Overruns (9.3).
  • Units may move only during friendly Movement Phases.

Important: Advances and retreats are combat displacements and do not require the expenditure of MP nor are they considered movement for purposes of this rule (11.6, 11.7).

  • A unit must stop upon entering an EZOC hex. Once a unit has moved into an EZOC hex, it may not move out of it during that Movement Phase.
  • A unit beginning a Movement Phase in an EZOC hex may only leave by disengagement or through combat results (9.4, 11.6, 11.7).
  • If a unit moves adjacent to a hex with only zero-defense strength enemy units in it, is not in an EZOC from another enemy unit, and the moving unit has sufficient MP to move into the zero-defense strength hex, it may do so and eliminate the zero-defense strength unit(s). If that hex is not in EZOC and the moving unit still has remaining MP, it may continue moving.
  • A unit may not be moved across a major river into an EZOC hex unless:
  1. The hex is occupied by a friendly unit; or,
  2. The enemy unit exerting the EZOC is not adjacent to the river.
  • A unit may not expend more MP than its total MA in any one Movement Phase.
  • MP may not be saved from one GT to the next (or from the Initial Movement Phase to the Mechanized Movement Phase), nor may they be transferred from one unit to another.
  • Units OoS have their movement allowance halved (rounded-up) (7.3).
  • Units moving from hex to hex along contiguous roads or railroads may utilize the reduced MP costs.
  • A unit with a non-zero movement allowance may always move one hex, regardless of the movement costs, if the movement is allowed, e.g. not from EZOC hex to EZOC hex, into or across prohibited terrain, or to disengage (9.4).

9.2 Mechanized Units

Units with a white box around their movement allowance may move in the Mechanized Movement Phase.

Important: Cavalry units without a highlighted movement allowance are not considered mechanized.

  • Mechanized units may move with either half or quarter (rounded up) of their printed movement allowance, depending on their supply status, during their side's Mechanized Movement Phase (7.4, 7.5).
  • Mechanized units may disengage during both the Initial and Mechanized Movement Phase (9.4).
  • Mechanized units pay mechanized movement costs as listed on the TEC.

9.3 Overruns

Overruns are a special form of combat conducted by the phasing player during the Initial or Mechanized Movement Phase. Unless noted otherwise, all the normal rules of combat apply.

9.3.1 Procedure

  • During the Initial Movement Phase, a unit must have enough MP remaining to expend +2 MP to attempt the overrun and pay the MP cost of entering the target hex (units may use roads).

Important: The overrunning units do not actually move into the defender's hex until it is vacated.

  • All units with a non-zero attack strength may attempt to overrun enemy units in the Initial Movement Phase.
  • During the Mechanized Movement Phase, only non-zero attack strength armor, mechanized and motorized units may conduct overruns.

Important: Cavalry units may conduct overruns only during the Initial Movement Phase.

  • Overruns are allowed only into clear, woods, and rough hexes without a fort. Overruns are allowed across a minor river (with or without road or RR crossings).
  • Unit(s) conducting an overrun may move through a friendly occupied hex to enter the enemy hex. The friendly unit is not part of the overrun.
  • Overrunning units must be in attack supply at the beginning of their movement to conduct an overrun, and must be in attack supply in the hex being overrun. Supply for defending units is determined at the instant of Overrun resolution.
  • Overrunning units may not disengage or enter an EZOC hex during their movement to overrun a target hex. They may conduct as many overruns as they have movement points to expend.
  • Units are halved in their attack strength when conducting an overrun. Division/Corps Integrity (DCI) bonuses apply (10.2).
  • Overrunning units may ignore the ZOC of the unit(s) being overrun, however a unit may not conduct an overrun from a hex with an EZOC being exerted into it by units not being overrun. If an additional overrun is planned, the additional overrun target's EZOC is not ignored until the first overrun is successfully completed.
  • If more than one unit is conducting a particular overrun, they must begin the Movement Phase in the same hex and move together to the overrun hex. They may separate during the advance or move separately after the overrun, but once separated may not overrun together for the rest of the Movement Phase.
  • Any loss or retreat for the overrunning units ends their movement for that Phase. The defending units may not advance.
  • Any vacated hex must be occupied by at least one of the successful overrunning units. Other units in a stack may continue to move and overrun, EZOCs permitting, if they have enough remaining MPs.
  • A unit may be overrun any number of times in a GT.
  • Armor, AT, air, and specialist shifts can be applied to overruns if the applicable units are part of the overrunning force or defending force (11.3.4).
  • HQ and Leader bonuses cannot be applied (12.0, 13.0).
  • DCI bonuses always apply if eligible (10.2).
  • Terrain shifts (woods, rough, and minor river) apply (11.3.1).

9.4 Disengagement

  • Units may exit an EZOC by expending an additional 2 MP.
  • Mechanized units may disengage during both the Initial and Mechanized Movement Phases.
  • Non-mechanized units may only disengage during the Initial Movement Phase.
  • The first hex a disengaging unit enters must be a non-EZOC hex.
  • A unit may not disengage from one EZOC hex by entering another EZOC hex.
  • Once a disengaging unit has entered a non-EZOC hex, it may enter an EZOC hex later in its movement.
  • If a unit does not have enough MP to enter a hex with the +2 MP cost, then it must remain in position.

10.0 Stacking & Division/Corps Integrity

10.1 Stacking

Regimental/Brigade Equivalents (RE):

  • 3 RE: Axis division

  • 2 RE: Soviet infantry division

  • 1.5 RE: Soviet fortified region

  • 1 RE: Soviet armor, mech, or cavalry brigade or division

  • 1 RE: Axis brigade, regiment, or KG

  • 0.5 RE: Battalion, HQ, Rocket or Artillery regiment or division

  • 0 RE: Leaders and markers (including fortifications)

  • Both sides are limited to 4.5 RE per hex.

  • Stacking is checked at the end of each Initial Movement and Mechanized Movement Phase.

  • Units may move into or through hexes occupied by other friendly units which would otherwise be overstacked if they are within the stacking limits by the end of the phase.

  • Hexes found to be overstacked must have units of the owning player's choice eliminated to meet stacking limitations.

  • Stacking is also checked during the Combat Phase at the end of each retreat and each advance; the final hexes of retreats and advances may not result in overstacking (11.6, 11.7).

  • A retreating unit with no other option than overstacking is eliminated.

Example: Maximum stacking for each side is shown below.

  • Soviet: 2 Soviet infantry divisions + HQ (2x2+0.5 = 4.5 RE); Soviet tank corps (3 brigades) + tank brigade + rocket division (3+1+0.5 = 4.5 RE).
  • German: German infantry division (3 regiments) + armor brigade + self-propelled artillery battalion (3+1+0.5 = 4.5 RE); German panzer division (3 regiments) + armor KG + heavy armor battalion (3+1+0.5 = 4.5 RE).

10.2 Division/Corps Integrity

  • Units from the same formation (German division or Soviet corps with same bold Division/Corps ID on the right side of the unit symbol) may benefit from division/corps integrity (DCI).
  • In a combat or overrun attack: At least two of the attacking units must be from the same formation in the same hex to benefit from DCI.
  • In a combat defense: At least two of the defending units from the same formation must be in the same hex or adjacent. If defending against an overrun, they must be in the overrun's target hex.
  • DCI is unaffected by any additional units in the hex, even if the additional units are part of another formation eligible for DCI.

Important: Only one formation may claim DCI shifts per hex per combat, although a second formation may be eligible for DCI if it is involved in a different attack.

  • Units with DCI receive combat shifts, based on the unit type, for both attack and defense.
  • After adding all R shifts and subtracting all L shifts, the maximum possible DCI shift in any single combat is 2R or 2L. Exception: (16.6.3).

Important: DCI shifts are halved when OoS (7.3).

  • DCI is checked during overruns and attacks at the instant of the overrun or attack for both attackers and defenders.

Errata (W107 Stalingrad Relief Errata, 23 Mar 26): the DCI shift values by unit type are those in the corrected Division/Corps Integrity table (the table the rules print at 16.3 and apply under 10.2), not the originally printed values. The corrected table is reproduced at 16.3.

Editor's note: the printed cross-reference here reads "(16.6.3)". The rules have no section 16.6; the 6th Panzer Division exception to the 2R limit is at 16.5.3. Transcribed as printed.

11.0 Combat

Combat occurs between adjacent opposing units at the phasing player's discretion. The phasing player is the attacker, the non-phasing player is the defender, regardless of the overall strategic situation.

11.1 Overview

  • Units may attack only during friendly Combat Phases. Exception: Overruns (9.3).
  • They may attack any or all enemy units adjacent to them. Only those units directly adjacent to a given enemy unit may participate in an attack against that unit.
  • Attacking is voluntary; units are never compelled to attack, and not every unit adjacent to an enemy unit must participate in an attack.
  • An enemy occupied hex may be attacked by as many units as may be brought to bear in the six adjacent hexes.
  • No unit may attack more than once per phase, and no enemy unit may be attacked more than once per phase.
  • If a defending force has only zero-strength units, the defender is eliminated. The attacker may immediately advance into the defender's hex and initiate an attack from that hex.
  • All units in a hex must be attacked together.
  • A unit may attack one adjacent hex or as many as it wishes. These attacks are concluded as one combat.
  • Units with zero attack strength may not attack alone, but they may be included in an attack to gain shifts.
  • A unit may not subdivide its printed/modified attack strength.

11.2 Multiple Unit & Multi-hex Combat

  • All defending units in each hex must be attacked as a single defensive strength.
  • The defender may not withhold a unit in a hex under attack.
  • Different units within a single hex may not be attacked separately, nor may one unit be attacked without involving the other units in that hex in the same combat.
  • All attacking units in each hex are free to attack together, separately, or not at all.
  • Other units in a hex containing an attacking unit do not have to participate in the same attack or any other attack, nor are they affected by the results, i.e., they do not suffer retreats or losses, nor may they participate in advance after combat.
  • If a unit is adjacent to more than one enemy occupied hex, it could attack one, some or all of them in a single combat. The only requirement is that all attacking units must be adjacent to all defending units.
  • If more than one type of in-hex defensive terrain is involved, the defender chooses one terrain type from those involved for a defensive shift.
  • A given unit's combat strength is always unitary; it may not be divided among different combats either for attack or defense.
  • Units with zero-attack strength may only participate in an attack if other non-zero attack strength units are participating. This would be to take advantage of specialist shifts, as well as indirectly the possibility of DCI shifts, HQ and/or Leader shifts, or concentric attack shifts (noting the zero-defense strength unit does not exert a ZOC of its own but does occupy one of the hexes adjacent to the defender).
  • Units in general supply may participate in attacks with units in attack supply but do so at half strength and count against the single attack that HQ in general supply may support during a GT (7.4).

11.3 Combat Support Shifts

  • The Combat Results Table (CRT) is composed of a series of ratio columns, with the results generally improving for the attacker as one moves to the right (to higher odds) and improving for the defender as one moves to the left (to lower odds).
  • Combat support shifts are expressed in left and right shifts as #L for defender benefits and #R for attacker benefits.
  • Calculate the combat odds and locate the appropriate ratio column on the CRT before applying any column shifts. All combat at greater than 10:1 is treated as 10:1. All combat at less than 1:3 is treated as 1:3.
  • All combat benefits must be declared prior to the resolution of combat, first by the attacker, then the defender. A player may choose to not benefit from any shifts available.
  • To determine the overall number of shifts applied to a combat:
  1. Total the DCI shifts on each side (halving each side if it is OoS). Subtract the defender L shifts from the attacker R shifts. If the number is more than 2R, the final DCI is 2R. If the number is more than 2L, the final DCI is 2L. If the number is between 1.5R and 1.5L, retain that number.
  2. Total all other attacker shifts multiplied by the supply level of the attacker, then total the defender shifts (11.3.2).

Important: If the defender is OoS, all non-terrain shifts are halved (7.3, 11.3.2).

  1. Subtract the defender total from the attacker total.
  2. Add the results from 1) and 2). If there is a fraction, round in favor of the defender.

a) Positive Result: Shift the ratio that number of columns to the right. b) Negative Result: Shift the ratio that number of columns to the left.

Example: A German attack in general supply has a panzer division for 2R and an infantry division for a total of 2R DCI shifts. The defending Soviets have a mechanized corps in general supply with a 1L DCI shift. The German has a 1R armor shift, a 2R HQ shift, and a 1R air support shift for a total of 4R, which is halved to 2R for general supply. The defender, along with the DCI shift, has a 1L AT shift and is in Woods terrain (1L shift) and has a 1L fort marker for a total of 4L. Totaling the DCI shift and the combat support shifts (2R + 2R - 4L) equals no shift in support of the German attack.

11.3.1 Terrain

  • If more than one in-hex terrain is present, only one may be selected by the defender.

Important: Shifts for field forts are in addition to in-hex terrain shifts (14.0).

  • Major and minor rivers do not apply if any attackers are on the same side of the terrain feature as the defenders; if more than one type of hex side terrain applies, the attacker selects (Example: if an attacker were attacking across a major river from one hex, and across a minor river from a different hex, the attacker could select the minor river).
  • In-hex and hexside terrain effects on combat are cumulative.
  • Roads and railroads never affect combat.

Important: An attacking unit may not attack a defender in terrain it cannot move into from the hex it is attacking from.

11.3.2 HQs, Leaders, & Column Support Shifts

Supply LevelAttack ShiftsDefense Shifts
Attack SupplyFullFull
General SupplyHalfFull
Out of SupplyQuarterHalf
  • HQs may provide column shifts (higher level artillery/rockets) to units in their command (same HQ color) only.
  • If a leader is stacked with a HQ, the leader may provide column shifts to the units within the HQ's range (a leader can augment the HQ shifts).
  • If two or more HQ are eligible to provide support to a specific combat, only one HQ and a leader stacked with it may provide HQ and leader support.

11.3.3 Air

Air markers provide shifts for attacks and overruns (never defense) and may be used once per turn.

  • No more than one marker may be used for a single combat.

11.3.4 Armor, Anti-tank (AT), & Other Specialists

Any mechanized or armor unit with a blue attack strength gains a 1R column shift against any defenders that do not have a blue 1R shift or a red 1L shift.

  • Only one such armor shift applies regardless of the number of armor units involved.

If a specialist heavy armor unit, such as a Tiger unit, is involved in an attack, the attack gains a 2R shift (1R for the armor shift and an additional 1R for the heavy tanks).

  • If any defending units have a 1R blue shift or a red 1L shift, that cancels the 1R armor shift, but not the 1R specialist shift.
  • If a specialist armor shift is used in an attack and the attacker takes a step loss, the first step loss must be taken by the specialist armor unit.

Any defending unit with a blue attack strength or a red defense strength gains a 1L shift if any of the attackers are armor/mech/specialist armor (units with a blue attack strength).

  • If more than one such defending unit is present in the defense, only one 1L shift is permitted, regardless of the number of armor or AT units involved.

Some German infantry divisions have one regiment marked with a red defense strength. This unit can project its AT modifier into adjacent hexes if another regiment from the same division is defending. If the unit with the red defense strength is eliminated, the AT ability is lost for the other regiments.

  • This AT benefit can only be used once per phase, against one overrun during each Movement Phase and once during the Combat Phase.
  • Soviet units with the AT modifier are primarily mechanized infantry brigades subordinate to mechanized and/or tank corps, or specialized AT or garrison units. These units do not project their AT modifier in the same manner as German infantry regiments.

If assault engineer units are stacked with any attacking units in attacks against cities and field forts, it provides a 1R shift.

  • If the attacking units take a step loss, the first step must be the assault engineer unit.

If rocket and/or artillery units are stacked with any attacking units, they provide the R shift printed in the upper right of their counters.

  • Rocket and artillery units do not add their shift to Overruns (9.3).
  • In attacks against cities and field forts rocket and artillery units provides one less R shift than their printed value.
  • Rocket and artillery units may not stack together.

Important: Other shifts (HQ and Leaders) are separate and additional.

11.3.5 Concentric Attacks

  • When attacking units and their ZOC surround a defending unit completely (all six adjacent hexes, even if occupied by an enemy unit or EZOC), the attack is shifted 1R.
  • Concentric attacks never apply to defenders in cities or field forts (14.0).

11.4 Combat Resolution

  • Total the combat strengths of all attacking units involved in a specific attack and compare the sum to the total combat strength of defending units (modifying each side for supply status) in the hex under attack.
  • State the comparison as a ratio: attacker's strength to defender's strength. Round down the ratio in favor of the defender to conform to the simplified odds found on the CRT.
  • Determine the attacking and defending shifts and adjust the column accordingly (Armor, specialist units, DCI, HQ, concentric attacks, and Leader for the attacker; anti-tank, specialist units, DCI, HQ, Leader, and terrain for the defender).
  • All modifiers, from all hexes being attacked, are applied, to deliver the final combat shift.
  • Roll 1d6 and read the result on the appropriate line under the odds column headings.
  • Apply the result immediately, before resolving any other attacks being made during the Combat Phase.
  • No support unit may be used to support more than one attack or defense per phase.

11.5 Combat Results

  • Combat results are listed as Attacker/Defender.
  • All combat results are expressed in terms of steps lost or hexes retreated.
  • An "E" result means all the steps for the attacking or defending units are lost and no retreat option is possible.
  • A number result means the affected side must lose the indicated number of steps and/or retreat all units the given number of hexes.
  1. Results may be taken as a combination of step losses and retreats, with each retreated hex satisfying one potential step loss.
  2. Step losses are total losses taken from the total affected force, not suffered by each unit individually. Most units have two steps. However, some units have only one step and are eliminated when suffering a step loss.

Important: Every unit in each combat must take one step loss before a second loss can be inflicted on the same unit.

  1. If the combat result has an asterisk, at least one step loss must be taken from the affected units.
  • Some results on the CRT are split results. In a split result the attacker always takes his result first, then the defender takes his result. If the attacker retreats, then the combat result for the defender is reduced by one (in split results), although a step loss must still be taken for results with an asterisk.
  • In an "ENG" result, both sides take a one step loss and remain in place, with no retreats or advances allowed even if the defender's hex is vacated by the result.

Important: Any attacker result, including ENG, halts overrun and further movement in a Movement Phase (9.1, 9.3).

  • Combat results affecting defending units are applied by the defending player, while results affecting attacking units are applied by the attacker.

11.6 Retreats

  • Retreats are always conducted by the owning player.
  • A retreating unit must retreat along its LoS wherever possible. If it is OoS, it must retreat towards its corresponding HQ. If neither of these is possible, it must take step losses.
  • Units may not retreat off the map or into or through any prohibited terrain or hex they could not enter via movement. If some or all of the retreat is not possible by any unit subject to the retreat, step losses must be taken until all units can retreat the remaining required length of retreat.
  • Units in a stack may be retreated in different directions.
  • A unit must, if possible, retreat into vacant hexes not in an EZOC, and may never retreat into or through an enemy unit or an EZOC. Exception: Friendly units with a defense strength of one or greater that are not participating in the combat currently being resolved negate EZOCs for purposes of retreat.
  • If no vacant hex is available, the units may retreat into a hex occupied by a friendly unit that is not participating in the specific combat being resolved. If this hex is subject to an attack later in the same Combat Phase, the retreating units do not contribute to the defense (strength or shifts) but are subject to any combat result.
  • If retreating units retreat into a friendly occupied hex and must retreat to a second hex, they pick up the friendly units and retreat them one hex as well. In this case, the hex retreated into may not be in an EZOC, regardless of friendly units.
  • If overstacked in the last hex of the retreat, the retreating player must retreat the excess units of his choice one additional hex. If overstacking exists after this additional hex of retreat, the owner removes excess units to meet stacking requirements.
  • Units retreating over an unbridged major river take one additional step loss in addition to the combat result.

Example: If a defending stack suffers a "/1" result and must retreat across an unbridged major river, it would suffer two step losses, one for the retreat across the major river, and then either one more step loss or one more hex of retreat.*

  • The player may choose to lose steps rather than retreat. Each step loss reduces the required retreat length by one hex.

11.7 Advance after Combat

  • Whenever an enemy unit is forced to retreat or is eliminated and leaves its original hex vacant as a result, it will leave a path of vacant hexes behind called the path of retreat. Any or all friendly victorious units participating in that combat are allowed to advance along the path of retreat.

Important: Advance after combat does not apply to an overrun conducted in a Movement Phase (9.3).

  • Any victorious unit may advance after combat, whether it was the attacker or defender in the battle, however, defending units may advance only when a result applies solely to attacking units who choose to retreat.

Important: Defending units may never advance following a split result in which the attackers retreat (11.5).

  • The option to advance must be exercised immediately, before any other combat resolution is begun.
  • Units are never forced to advance after combat.
  • After advancing, units may not attack (or be attacked, if they are advancing defending units) in that phase, even if their advance places them adjacent to enemy units whose battles are yet to be resolved or who were not involved in combat.
  • Advancing units may cease advancing in any hex of the path of retreat.
  • Advancing victorious units ignore EZOC.
  • An advancing unit may not stray from the path of retreat.
  • If all units in a hex are eliminated, any attacking units may advance into the defender's hex at the attacking player's option. Also, victorious Armor/Mech/Mot/Cav units may advance up to two hexes after combat. The first hex must be the hex formerly occupied by the defending force. The second hex may be any empty hex adjacent to the defender's hex.
  • A unit advancing into a swamp or a hex with a field fort, must stop.
  • Units advancing across a major river must stop in the first hex after crossing and may not advance any farther regardless of how far the defender retreated, or if all defending units were destroyed.

12.0 Headquarters

Headquarters are vital in directing combat units, combat support, and logistical support in the series.

  • HQs are at army- and/or corps-level for the German/Axis forces and army-level for the Soviet forces.

Example: The German 57th Panzer Corps HQ has two sides. The front (supply symbol) side indicates it is in attack supply. The back (HQ symbol) side indicates general supply.

12.1 Supply Level

  • A HQ must be able to trace a LoS to a supply source to be in attack or general supply (7.1).
  • During the Supply Phase of each GT, eligible HQs may be placed in attack supply, with all others being placed in general supply.
  • They may be flipped to their attack supply side at the player's choice within the limits specified in the scenario rules.
  • If a HQ is OoS, it cannot be flipped to attack supply and, for Soviet units, it cannot be a source of general supply (mark it with an OoS marker).

Important: When in attack supply, a HQ may not move in the Mechanized Movement Phase.

12.2 Supply Range & HQ Colors

  • Supply range is the number in the upper right corner of HQ counters.
  • All color-coded combat units must be within their HQ's range to be in attack supply (7.5).
  • All Soviet combat units must be within range to also be in general supply (7.4).
  • Axis units which are out of range of their HQs are in general supply, or may be OoS if they cannot trace a LoS to a supply source (7.2).
  • Soviet units which are out of range of their HQs are OoS (7.3).
  • Units that do not have a color code are considered independent and may draw supply from any HQ (generally two German divisions/Soviet corps, or a maximum of six individual units, but see scenario rules for limits as to the number that can draw at any one time).

12.3 Replacement

If a HQ is destroyed in combat, it is replaced in the player's next Reinforcement Phase and is deployed at the owning player's discretion in the same manner as other reinforcements (6.0).

12.4 Combat Shifts

  • HQs are also used to deliver higher level support to units within supply range, regardless of EZOCs.
  • The combat shifts on HQs may be used to enhance attacks and/or defense and are in addition to any unit level combat shifts.
  • HQs in attack supply with more than one shift may split the shifts between attacks or defense.

Example: A HQ with a 2R shift may split the shift to support two different attacks with 1R each.

12.5 Combat

  • HQs may never attack but defend normally.
  • If attacked, HQs defend with their printed defense strength and undergo all CRT results.

Designer's Note: The use of key HQs to deliver attack supply abstracts a great deal of logistics and yet is very historical as it relates to offensives and axes of attack. Equally, if HQ units were destroyed, replacement HQs were rapidly restored. However, these are key units and need to be protected. Artillery in both armies was controlled at the senior HQ level. Thus, the points allocated represent the corps/army-level batteries in these battles.

13.0 Leaders

Commanders had a great tactical/operational influence on battles, with their prime role being to influence combat.

13.1 General

  • Leaders have a historical corps/army/group attachment. Their range is the same as the HQ they are stacked with, regardless of EZOCs.
  • A leader's combat shift can be used in attack if it is a "R" shift or in defense if it is a "L" shift. Some leaders have a combat shift for both attack and defense and can provide each shift in the corresponding Combat Phase.
  • Some leaders have a "?" for shifts, in which case scenario rules will determine the shift (16.6.2).

Editor's note: the printed cross-reference "(16.6.2)" points to a section that does not exist in the printed rules (section 16 ends at 16.5.4). Transcribed as printed.

  • Leader shifts are based on their historical profile and are in addition to and treated like HQ shifts.

Example: A 1R leader stacked with a 2R HQ in attack supply could split the 3R total into three 1R shifts for three attacks.

  • Leaders must always be stacked with their associated HQ and are eliminated if the HQ they are stacked with is eliminated.
  • Leaders are permanently eliminated and are not replaced when the HQ is replaced (12.3).
  • Leader shifts are halved when the HQ they are stacked with is in general supply or quartered when OoS (7.3, 7.4).

14.0 Fortifications

Field forts provide all units occupying the same hex as the fort with a 1L combat shift (11.3).

  • Field forts may be placed at the end of the initial Movement Phase on any friendly unit in a clear or woods hex not in an EZOC that has not moved in the initial Movement Phase.
  • Field forts are removed if unoccupied but may be redeployed on a later turn.
  • Units in field forts must trace LoS.
  • Field forts cancel the concentric attack shift (11.3.5).

Important: The number of field forts in the game is limited by the countermix.

Designer's Note: Field forts which are initially placed in a town or city hex represent work performed over time prior to the beginning of the scenario.

15.0 Scenario

Operation Wintergewitter: Stalingrad, December 1942

Southern Russia, December 1942: The German 6th Army has been surrounded for nearly a month. Field Marshal Manstein strives to assemble a relief force whilst countering threats all across Army Group South. By early December 57th Panzer Korps is ready to strike north from its base. However, even at this stage the composition of the Korps is uncertain. December 1942 will see a desperate attempt to break through to the beleaguered 6th Army along with a ferocious Soviet counterattack as part of a wider STAVKA plan to trap the retreating German 1st Panzer Army.

The game runs from 9 December-28 December 1942, a total of 10 GT.

16.0 Scenario Specific Rules

Important: Scenario rules take precedence over system rules.

16.1 Supply

16.1.1 Axis

  • The following are supply sources:
  1. Southern map edge behind Start line
  2. Kotelnikovo (hex 3319)
  3. Western map edge hexes south of hex 1423
  4. Northern map edge hexes between 0204-0212, inclusive
  • German 57th Panzer Korps (57Pz):

    • GT 1: Attack Supply with a limit of one attack, including overruns
    • GTs 2-8: Attack Supply with a limit of three attacks, including overruns
    • GTs 9-10: General Supply
  • Romanian 4th Army (4Rom):

    • GTs 1-2: General Supply
    • GTs 3-4: Attack Supply
    • GTs 5-10: General Supply
  • German 4th Korps (4K):

  1. GTs 1-10: General Supply but may not conduct attacks until going into attack supply.
  2. Goes into attack supply on the GT when a 57PzK/4Rom unit crosses the Myshkova River (hexes 1423-1708) or the hex row 1708-1701. The Axis may defer attack supply for 4K until the following GT.
  3. Remains in attack supply for one GT only, after which it reverts to general supply. 4K units may continue to conduct attacks in general supply.

Important: Romanian units which are split-coded may draw supply from either 57PzK or 4Rom.

Designer's Note: Often overlooked, the operational limits of both relief and 6th Army forces were factored into any breakout attempt.

16.1.2 Soviet

  • The following are supply sources.
  1. Eastern map edge hexes between 0201-2901, inclusive
  2. Northern map edge hexes between 0514-0618, inclusive
  • 57th Army (57A), 64th Army (64A):

    • GTs 1-10: General Supply. Units may not move nor attack until: a) They are attacked by German 4K units, or; b) A 57PzK or 4Rom unit crosses the Myshkova River or the hexrow 1708-1701.
  • 51st Army (51A):

    • GTs 1-5: General Supply. On GTs 1-2: All 51A units are in general supply if they can trace a LoS of any length to a road or railroad which can then trace a LoS to Aksay (hex 2208), provided Aksay is occupied by at least one Soviet unit. This is in addition to being able to trace a LoS to 51A HQ, and supersedes that requirement if they are out of range of the HQ. On GTs 3-5: 51A units must be within range of 51A HQ to be in general supply.
    • GTs 6-10: Attack Supply.

Designer's Note: This represents the ability of 51A units to access a limited amount of supplies from forward depots in Aksay.

  • 2nd Guards Army (2Gd):

    • GTs 1-4: General Supply.
    • GTs 5-10: Attack Supply.

Important: 2Gd GT 1 reinforcements (4 Mech Corps and 55+158 Tank Bde) arrive in general supply and remain in general supply, prior to the arrival of 2Gd HQ on GT 3, provided they can trace a LoS to a Soviet supply source.

  • The Volga River does not block Soviet LoS (7.1, 11.3.1).

Important: 55+158 Tank Brigade and 300th Rifle Division may draw supply from any Soviet HQ (12.2).

Also: 38th Rifle Division and 143rd Rifle Brigade may draw supply from either 57A or 64A.

Designer's Note: The sole task of both 57th and 64th Army was to contain German 6th Army. The latter units were front reserves, hence their supply flexibility.

16.2 Disengagement

  • All German 4K units expend an additional +1 MP when attempting to disengage for a total of +3 MP (9.4).

Designer's Note: German 4K units were exhausted and had little mobility/fuel hence also their reduced movement factor.

16.3 Division/Corps Integrity

The following Division/Corps Integrity (DCI) shifts are in effect (10.2):

Errata applied (W107 Stalingrad Relief Errata, 23 Mar 26): the table below is the corrected version and replaces the printed table. The printed German Infantry row read Attack 1L, Defense —, Overrun —; the corrected row is Attack —, Defense 1L, Overrun —. The other rows are unchanged.

Unit TypeAttackDefenseOverrun
German Pz/PG/Mot2R2L2R
German Infantry—1L—
Soviet Tank/Mech/GCC1R1L—

Important: German 15Lw does not receive the defensive DCI shift for German infantry divisions.

16.4 Air Support

Air support is available to both sides. The Game Turn Record Track shows the number of air support markers each side receives per GT.

16.5 Special Units

16.5.1 Soviet 235th Tank Brigade (Flame)

235th Tank Brigade negates the 1L shift of any Axis field fort it attacks. If attacker losses are called for, the first step loss must be taken from this unit.

16.5.2 Paulus & 4th Korps

Paulus and the 4K HQ may potentially provide combat shifts for 4K units.

  • For every combat involving a 4K unit within range of Paulus, the Axis rolls 1d6:

    • Result of 1-3: Paulus provides a 1L shift for defending 4K units, or a 1R shift for attacking 4K units.
    • Result of 4-6: Paulus provides no shifts of any type.
  • Die rolls for Paulus support are made after all other shifts, such as air, have been announced.

  • For 4K units conducting attacks within range of the 4K HQ, the Axis rolls 1d6:

    • Result of 1-3: 4K HQ provides a 1R shift for that attack.
    • Result of 4-6: no shift is provided.
  • 4K HQ provides no defensive shift.

16.5.3 6th Panzer Division (6PzD)

  • 6PzD receives an additional 1R DCI shift in attacks and overruns in which it participates, for a total 3R DCI shift (10.2).

Important: This is an exception to the normal 2R limit for DCI shifts for a single combat (10.2).

  • 6PzD receives the normal 2L DCI shift when defending.

16.5.4 57th Engineer Battalion

German 57th Engineer Battalion may construct a bridge across a minor river hexside.

  • The unit must end its Initial Movement Phase adjacent to a river hexside.
  • The bridge is then placed at the end of Initial Movement Phase, after all Axis units have completed movement.
  • The bridge negates all movement and combat effects associated with the river.
  • The bridge may only be placed once per game and may not be moved once placed.
  • If Soviet units enter the hexes on either end of the bridge, it is considered destroyed and is removed from the map.

Designer's Note: While all of the rivers on the map were frozen at the time of this operation, rivers in this area of southern Russia are characterized by steep banks and deep gullies, hence the need for bridging equipment.

17.0 Victory Conditions

Only the Axis gain Victory Points (VP). VP are totaled at the end of the game and are gained during the game as follows.

  • 2 VP for occupying or being the last to occupy or pass through Kotelnikovo (hex 3319) at the end of the game.
  • 1 VP for each 4K unit able to trace a LoS of any length to 57PzK HQ at the end of the game.

Important: Paulus and 4K HQ do not count for VP purposes.

  • 1 VP for occupying or being the last to occupy or pass through the following towns at the end of the game:

    • Aksay (hex 2208)
    • Beketovka (hexes 0404 & 0405, 1 VP per hex)
    • Karpovka (hex 0210)
    • Lyapichev (hex 0917)
    • Verknekumske (hex 2117)
  • 1 VP each when any 57PzK unit enters the 0701 and 0801 hex rows.

  • -1 VP for each 57PzK unit OOS at the end of the game.

17.1 Victory Levels

Axis Victory PointsVictory Results
≤0 VPSoviet Strategic Victory
1-4 VPSoviet Operational Victory
5-7 VPDraw
8-9 VPAxis Operational Victory
>10 VPAxis Strategic Victory

18.0 Set Up

  • All units are deployed according to set-up instructions.
  • Axis set up second and move first each turn.
  • Game length: 10 GT.

Important: No units on either side may setup nor move west of the Don River, nor north or east of the Volga River. Soviet GT 1 reinforcements, which enter at hex 0719, are the only exceptions to this and must move directly across the river to hex 0819 upon entering.

18.1 Axis

Unit/FormationSetup Hex
Field Forts0405, 0412, 0413, 0506, 0508, 3207, 3209, 3214, 3306, 3319
German 57th Panzer Korps (57 PzK)
57PzK HQ3319
Kirchner, 2/62 Art, Rom Kot 4 PzA KG3319
602/844 Art, 57 Eng3318
201/23 Pz, 26/23 Pz, 54 Rocket3316
6 Pz (3 units)3220
2 Rom, 1/26 AT3219
1 Rom, Pan AT KG3218
126/23 Pz3215
228 StuG3117
4+18 Rom, 1/61 AT3115
Pfeif KG3214
Romanian 4th Army (4 Rom)
4 Rom HQ3306
2/3 8 Rom Cav3210
7/8 5 Rom Cav KG3207
243 Rom SP, 654 Aslt Eng3208
4/6 8 Rom, Rom Corps 4A KG3209
German 4th Korps (4K)
4K HQ0210
Paulus, 6A Art, 45 Aslt Eng0210
3 Mot KG0412
36/14 Pz, 103/108 14 Pz0413
376 KG0506
371 KG0405
297 KG0508
2/16 Pz, 16 Pz KG0408

German Reinforcements

Entry TurnFormationNoteEntry Hex
GT 115 Lw2 units3319
GT 417 Pz3 units3319

18.2 Soviet

Unit/FormationSetup Hex
Field FortsHexes 0404, 0504, 0505, 0509, 0510, 0512, 0606, 0609, 2208, 3006, 3017
51st Army (51A)
51A HQ2611
302 Div3017
126 Div3015
61 Cav Div3006
76 FR3004
81 Cav Div2820
85 Tank Bde2816
91 Div2807
51A AT2715
13 Tank/13 Mech2611
234 Tank Bde2514
61+62 Mech/13 Mech2110
17 Mech/13 Mech2208
235 Flm Tank Bde1811
57th Army (57A)
57A HQ0812
57A AT, 61 Mech Bde0812
15 Gd Div0512
120 Div, 115 FR0510
422 Div0509
189 Tank Bde, 254 Tank Bde0710
38 Div (2-2-5)0709
36 Gd Div, 38 Div (1-3-5)0609
64th Army (64A)
64A HQ0704
29 Div, 143 Bde0607
135+166 Tank Bde0707
157 Div, 204 Div0606
113 FR, 66 Naval Bde0505
169 Div0504
93, 96, & 97 Bdes0404
77+118 Tank Bde0603
64A AT0704
90 Tank Bde, 1261 SP Regt0705

Soviet Reinforcements

Entry TurnFormationNoteEntry Hex
GT 14 Mech Corps3 units0719
GT 155+158 Tank Bde0719
GT 32 Gd HQ, 87 Div0514
GT 420 Dest AT Bde0514
GT 57 Tank Corps (7Tk)4 units0617
GT 549 Gd Div, 387 Div0617
GT 6Malinovsky 2 Gd HQ
GT 62 Gds Mech Corps (2GM)3 units0617
GT 624 Gd Div, 33 Gd Div, 98 Div0617
GT 72 Gd Rocket0514
GT 83 Gd Div0514
GT 96 Mech Corps3 units0514
GT 9300 Div0514

19.0 Optional Rules

19.1 Soviet Special Reinforcements

  • The Soviets may deploy 3rd Guards Cavalry Corps (3GCC-4 units) on any GT after units from either 57PzK or 4Rom cross the Myshkova River or hex row 1708-1721.
  • 3GCC units deploy on any of hexes 0514-0515 and 0616-0617, inclusive.
  • Deployment of 3GCC is at Soviet discretion. However, if 3GCC deploys, the Germans receive 2 VP.

19.2 German Special Reinforcements

  • The Germans may deploy special reinforcements as follows:
Entry TurnFormationNoteEntry Hex
GT 1-2306 Infantry Division3 unitsKotelnikovo (hex 3319)
GT 3-716 Motorized Division2 unitsAny southern map edge hex
GT 3-7503 Heavy Panzer BattalionAny southern map edge hex
GT 8-105SS KGKotelnikovo (hex 3319)
  • Units may deploy on any of the GTs in which they are available, but not after.
  • Deployment of German special reinforcements is at Axis discretion, and none, some, or all of the reinforcements may deploy. The Germans lose 2 VP for the deployment of each formation.

Important: VP are lost for the deployment of each formation, not individual units in each formation.

Example: If 306 Infantry deployed, the Germans would lose 2 VP. However, if 16 Motorized, 503 Heavy Panzer, and 5SS KG deploy, the Germans would lose 6 VP as 503 Heavy Panzer and 5SS are considered individual formations.

  • 11 Panzer Division and 336 Infantry Division are also available for deployment from GT 3-7 on any southern map edge. However, the Germans lose 3 VP for the deployment of each of these formations.

Designer's Note: All of the above units, both Soviet and German, were in theater but involved in other battles. Their redirection would have had an impact in those areas, hence the VP loss for both sides.

19.3 Axis Historical Start Option

  • The Axis may decide to start the attack/game on GT 2.
  • If chosen, on GT 1 Axis units may move half of their movement allowance during the Initial Movement Phase, and a quarter of their movement allowance during the Mech Movement Phase. No attacks or overruns may be made, and Axis GT 1 reinforcements are deployed normally.
  • On GT 1 Soviet 51A units which are in supply may move half of their movement allowance, while those which are OOS may move a quarter of the allowance. No units may move during the Mech Movement Phase, and no attacks may be conducted.
  • The remainder of the Soviet player turn is skipped on GT 1, and play moves directly to the Axis player turn of GT 2.

20.0 Designer's Notes

I was delighted when this game proposal passed the Decision Games survey. I had always felt that this battle in southern Russia in December 1942 was an ideal candidate for the Battles in the East series. However, it was a very specific, if fluid, battle and thus the magazine option meant I could cover just the relief effort by 57th Panzer Korps and the 2nd Guards Army counterattack.

Reading many accounts, as well as talking with Colonel Glantz, I was struck by how the Axis forces took the Red Army by surprise and how close they came to breaking through to the beleaguered 6th Army. Equally noteworthy, I was shocked how the Axis defensive effort allowed 1st Panzer Army's Caucasus retreat to be a success once the Soviet counter-offensive began. Malinovsky was still learning his trade and this, coupled with the Red Army's rigid command, meant a chance for a wider victory may have been missed.

For the Axis player, I have allowed a slightly earlier start in the game than historically occurred. The Axis player may choose this option, but it has consequences. Time remains the enemy of the Axis player.

Optional theatre reinforcements are available in the game. All are dependent on events and historical chances. I believe this will help make no two games the same.

The Axis forces need to attack along a 2-prong axis to destroy 51st Army and capture Aksay. This will form the base to break through to 6th Army. Given the design limits, I have included units in the 6th Army I felt are historically relevant as Kampfgruppe, but all are low on fuel and ammunition.

Using the 4th Panzer Army probes, can the Axis player create a corridor for any of 6th Army's units to escape?

The Axis window is only until turns 5-6. After this they will be forced onto the defensive by Malinovsky and his 2nd Guards Army. If Axis losses are too high and without any 6th Army units, it will be a challenge to prevent the Red Army from driving all the way south on the map.

The Red Army player must initially fight a defensive battle with the scattered and outnumbered 51st Army. However, do not forget to create a southern looking flank with any spare "Stalingrad ring" units. This could be critical. Defense, though, will soon turn to attack, and so ensure the drive south. Destroying local Axis units is good but the larger strategic picture requires turning 4th Panzer Army's flank. This would disrupt Axis forces retreating from the Caucasus. Kotelnikovo must be captured.

In conclusion, I hope I have captured the many uncertainties of this battle in the game.

Sequence of Play Summary

Player Turns: First player completes Phases 1-5, followed by second player Phases 1-5.

  1. Reinforcement Phase: Place any reinforcements on their entry hex/location.
  2. Supply Phase:
  • Check for HQ and units not in Attack/General supply and mark them Out of Supply (OoS).
  • Determine the supply status for each HQ, adjusting it per scenario rules and player decisions.
  • Place Attack supply markers ahead on the TRT if included (see scenario rules).
  1. Initial Movement Phase:
  • Move any units desired (including reinforcements).
  • Units may conduct overruns and disengagement.
  1. Combat Phase:
  • Attack with as many units adjacent to enemy hexes as desired.
  • Check supply status at the moment of combat.
  1. Mechanized Movement Phase:
  • Check supply status.
  • Move all armor, motorized, mechanized, cavalry, and HQ units again (all units with their movement allowance in a white box).
  • Eligible units may conduct overruns and disengagement.

End of Game Turn: After both player turns (1-5):

  1. Game Turn Indication Phase:
  • Check for any victory points players receive for objective occupation this turn.
  • Move or remove any Attack supply markers on the just completed turn.
  • Advance the game turn marker one box on the Turn Record Track to indicate the end of one game turn and the beginning of the next turn.
  • Once the last game turn of the scenario has been completed, the game is over, and the players determine who has won.

Combat Shift Summary

Shift SourceShift
Armor1R
Heavy Armor1R (additional)
Assault Engineers1R (against cities or field forts)
Concentric Attack1R
Artillery1R (not against cities or field forts)
Rockets1R (not against cities or field forts)
Air Support1R (each)
HQ?R/L
Leader?R/L
Division/Corps Integrity (DCI)?R/L
Woods1L
Swamp1L
Anti-Tank (vs Armor)1L
Field Fort1L (in addition to other terrain)
City2L
Rough2L
Minor River2L (in addition to other terrain)
Major River3L (in addition to other terrain)