RulesPal
Chat
Rulebook
Spanish Civil War Battles: Vol. 1 – Brunete & Jarama thumbnail

Spanish Civil War Battles: Vol. 1 – Brunete & Jarama

Combines with
Spanish Civil War Battles: Vol. 2 – Guadalajara & Penarroya

Spanish Civil War Battles: Vol. 1 – Brunete & Jarama Rulebook

Table of Contents

Table of Contents

  • Standard Rules
    • 1.0 Introduction
    • 2.0 Game Equipment
      • 2.1 Sample Counters
    • 3.0 Game Scale (General)
    • 4.0 Set Up
    • 5.0 Turn Sequence
    • 6.0 Movement
      • 6.1
      • 6.2
      • 6.3
      • 6.4
      • 6.5 Road Movement
    • 7.0 Stacking
      • 7.1
      • 7.2
      • 7.3 Road Exceptions
      • 7.4 Scenario Stacking Rules
    • 8.0 Zones of Control (ZOC)
      • 8.1
      • 8.2
      • 8.3
    • 9.0 Supply
      • 9.1 Line of Supply
      • 9.2
      • 9.3 Out of Supply Effects
    • 10.0 Headquarters and Command
      • 10.1 Tracing Lines of Command
      • 10.11
      • 10.12
      • 10.13
      • 10.14
      • 10.2
      • 10.3 Out of Command Effects
      • 10.4
      • 10.5
    • 11.0 Combat
      • 11.1
      • 11.2 Attack Types
      • 11.21 Attack Type Choice
      • 11.22
      • 11.3 Combined Arms Modifiers
      • 11.4 Resolution
      • 11.5 Step Loss
      • 11.6 Retreat
      • 11.61
      • 11.62
      • 11.7 Advance after Combat
      • 11.8
    • 12.0 Artillery
      • 12.1
      • 12.2
      • 12.3 Support Fire
      • 12.31 Support Fire in the Attack
      • 12.32 Support Fire in the Defense
      • 12.33
      • 12.34
      • 12.4 Barrage Fire
      • 12.41 Line of Sight (LOS)
      • 12.411 Spotting
      • 12.42
      • 12.43
      • 12.5 Artillery Under Attack
    • 13.0 Air Units & Air Points
      • 13.1 Air Units
      • 13.2 Air Points
      • 13.3 Air Bombardment
    • 14.0 Leaders
      • 14.1
      • 14.2
      • 14.3
      • 14.4
    • 15.0 Reinforcements
      • 15.1
      • 15.2
      • 15.3
    • 16.0 Exiting the Map
    • 17.0 Weather
  • Exclusive Scenario Rules
  • Jarama: 6–26 February 1937
    • Introduction
    • Player Order
    • Set Up
    • Reinforcements
    • Assault Points
    • Victory Conditions
    • Special Scenario Rules & Notes
  • Brunete: 6–24 July 1937
    • Introduction
    • Player Order
    • Set Up
    • Reinforcements
    • Assault Points
    • Victory Conditions
    • Special Scenario Rules and Notes

Standard Rules

1.0 Introduction

Spanish Civil War Battles is a wargame system for simulating battles of the Spanish Civil War. The rules are divided into two sections. The first part consists of the standard rules, which apply to all the games in the series; the second part consists of the exclusive scenario rules, each of which applies only to a specific battle. In Spanish Civil War Battles, one player controls the Republican units, representing the Loyalists, Anarchists, Communists and various International Brigades. The other player controls the Nationalists, including Franco's army as well as German and Italian fascists.

The two games in this issue of Strategy & Tactics are Brunete and Jarama. Scenario special rules may supercede the standard rules.

2.0 Game Equipment

A complete copy of this game set is one 22 x 34 inch map sheet, one counter sheet of 280 counters and these rules. Players will need to provide a 6 sided die for combat resolution.

2.1 Sample Counters

See next page.

Sample Counters and Unit Symbols chart (clarification): air units are represented by aircraft silhouettes.

3.0 Game Scale (General)

Game scale is one mile per hexagon and one day per game turn unless stated otherwise in the exclusive special rules for each individual game. Units represent various echelons. Aircraft units (if any) represent squadrons.

4.0 Set Up

Set up instructions are given in the exclusive special rules for each individual game.

5.0 Turn Sequence

General Rule. Spanish Civil War Battles is played in Game Turns. Each turn consists of a series of "Phases" in which players take actions in the sequence designated below:

A. Initiative Determination Phase. Determine which player will be the "First Player" for the turn and which one will be the "Second Player" (see Scenario Instructions).

B. Weather Determination Phase. Determine the weather for the turn (rule 17.0).

C. Air Bombardment Phase (rule 13.0)

  1. First Player resolves air bombardments.
  2. Second Player resolves air bombardments.

D. First Player Movement Phase (rule 6.0)

  1. First Player checks supply and command for movement.
  2. First Player enters reinforcements onto the map and moves all desired units.

E. First Player Combat Phase (rules 11.0, 12.0, 13.0)

  1. Both players check supply and command for combat.
  2. Second Player assigns air units/air points for defense.
  3. First Player assigns air units/air points for attack.

For each combat:

  1. First Player determines if the attack will be an Assault, in which case he must expend an Assault Point.
  2. First Player assigns artillery to support the attack.
  3. Second Player assigns artillery to support the defense.
  4. Execute any voluntary retreats (if one or both sides voluntarily retreat, the combat terminates at this point).
  5. Calculate the combat differential, apply any modifiers, roll the die, and then apply any combat results, including post-combat retreats and advances after combat.

The First Player may then execute the next attack, if any.

F. Second Player Movement Phase (rule 6.0)

  1. Second Player checks supply and command for movement.
  2. Second Player enters reinforcements onto the map and moves all desired units.

G. Second Player Combat Phase (rules 11.0, 12.0, 13.0)

  1. Both players check supply and command for combat.
  2. First Player assigns air units/air points for defense.
  3. Second Player assigns air units/air points for attack.

For each combat:

  1. Second Player determines if the attack will be an Assault, in which case he must expend an Assault Point.
  2. Second Player assigns artillery to support the attack.
  3. First Player assigns artillery to support the defense.
  4. Execute any voluntary retreats (if one or both sides voluntarily retreat, the combat terminates at this point).
  5. Calculate the combat differential, apply any modifiers, roll the die, and then apply any combat results, including post-combat retreats and advances after combat.

The Second Player may then execute the next attack, if any.

H. Advance the turn marker to the next turn.

6.0 Movement

General Rule. Each unit has a movement factor printed on its counter.

6.1

Movement must be from hex to contiguous hex, with no skipping of hexes allowed. Terrain costs are given on the TEC table. Movement points (MPs) are never accumulated from turn to turn. A unit must have sufficient points to enter a hex, and movement allowances may never be exceeded.

6.2

Units must stop when they enter an enemy Zone of Control (ZOC, see Rule 8.0) and cease their movement. Units may move through other friendly units. Stacking limits may not be exceeded at the end of a movement phase.

6.3

Units may not move through or end movement on a road hex if the hex to be entered already has a friendly unit in it. The only exception is units in cities; however, units which enter city hexes which contain other friendly units pay "1" movement point, not the road movement rate (owing to traffic congestion).

6.4

Certain units are defined as "mechanized." They may have additional movement costs and restrictions—see the TEC.

  • In this edition of the game, mechanized units include all tanks, light tanks, armored cars, German F/88 antiaircraft units and trucks.

6.5 Road Movement

Units moving along contiguous road hexes pay one movement point per hex entered, regardless of other terrain. Mechanized units moving along Main Roads pay one-half movement point per hex entered, i.e., their movement is doubled while on roads. Units moving via roads (bridges) do not pay any extra movement points to cross river hex sides, and all units may cross rivers on bridges.

7.0 Stacking

General Rule. Stacking is having more than one unit occupying the same hex.

7.1

The stacking limit is:

  • two infantry battalions, or
  • one regiment/brigade-sized unit.

Companies, headquarters (HQs), leaders (if any), and air units do not count toward stacking limits.

Stacking (clarification): Companies count as one third a battalion for stacking; they do not stack for free; however, three tank companies count as one unit for stacking on roads (see 7.3). Headquarters do not count for stacking, as per 7.1.

7.2

Stacking applies at the end of each phase. If at the end of any phase units are over stacked, then the phasing player must eliminate any excess units in a stack (his choice).

Stacking (clarification): units may not over stack during initial deployment.

7.3 Road Exceptions

Because units on a road hex are presumed to be strung out along the road, stacking is not allowed in any road hex unless it is a town/city hex. Only one unit (any size) may occupy a road hex outside of a town/city. Normal stacking limits apply to town/city road hexes.

7.4 Scenario Stacking Rules

Players should pay attention to the exclusive rules governing stacking limits during a specific scenario.

8.0 Zones of Control (ZOC)

General Rule. All maneuver units with an attack value of "3" or more possess a zone of control (ZOC). Units with an attack value of "2" or less have no ZOC. Also, artillery, air and leader units do not have ZOCs.

8.1

A ZOC extends into all six hexes surrounding a unit. The presence of friendly units does not negate or otherwise mitigate the effects of an enemy ZOC in any way.

8.2

ZOCs do not extend across major rivers, or into terrain the units are prohibited from moving into.

8.3

Units must stop movement when they enter an enemy ZOC. A unit may leave an enemy ZOC at the start of a movement phase. Leaving costs two additional movement points. The unit may move normally thereafter. A unit may move directly from one enemy ZOC to another if (and only if): it starts its movement in an enemy ZOC, moves directly into another enemy ZOC, and then ceases movement. This costs an additional four movement points. (Effectively, this is a one hex infiltration capability.)

9.0 Supply

General Rule. Units must trace a Line of Supply to function at full strength and effectiveness.

9.1 Line of Supply

A unit traces a Line of Supply no more than two hexes, free of enemy units and enemy ZOCs, to a road. That road, in turn, must lead to the appropriate map edge, as outlined in the exclusive scenario rules. This path must also be free of enemy units and their ZOCs. If a unit cannot do so, it is deemed Out of Supply. Supply can be traced through any type of terrain.

  • So, for example, even though mechanized units can not cross unbridged rivers, supply paths for mechanized units may cross such rivers.

9.2

Units may voluntarily move Out of Supply.

9.3 Out of Supply Effects

Units that are Out of Supply have their movement and combat values halved, with fractional values rounded upward. Artillery units that are Out of Supply cannot provide any support. Supply is always determined at the start of the appropriate movement or combat phase and remains in effect for the rest of that phase. Note that the defender will determine his supply during the enemy combat phase.

9.3 Out of Supply Effects (clarification): Artillery units that are Out of Supply may not fire in any manner. Air units do not have supply considerations.

10.0 Headquarters and Command

General Rule. Units must trace a proper Line of Command to a friendly Headquarters (HQ) in order to function at full effectiveness.

10.1 Tracing Lines of Command

A Line of Command is six hexes from the unit to its next immediately higher echelon of command. Units are usually part of a brigade or division and therefore must trace to that HQ. To provide command, a Brigade HQ must be able to, in turn, trace a Line of Command six hexes or less to its Division HQ, and then the Division HQ must trace six or less hexes to the supreme field headquarters, which is usually a Corps HQ. Units must always trace to a Brigade HQ first, before tracing to a Division HQ (which then traces to the Corps HQ).

10.1 Tracing Lines of Command (clarification): The Line of Command is six hexes, regardless of terrain.

10.11

Lines of Command may not be traced through enemy units or enemy ZOC. It may be traced through otherwise prohibited terrain.

10.12

Corps HQs may not be present in certain scenarios. If there are no Corps HQs, the Lines of Command terminates with the appropriate Division HQs.

10.13

Units that do not belong to any division may trace to any HQ (within six or fewer hexes). Division level units trace to their Division HQ directly, corps level units to the Corps HQ.

10.14

If the top-level HQ (Division or Corps) is lost in combat then all of the units under its command are now Out of Command.

10.2

If a unit cannot establish a Line of Command then the unit is Out of Command. See 10.4.

10.3 Out of Command Effects

Units that are Out of Command defend normally. Their movement is reduced to half that of normal, fractions rounded up. They cannot move into an enemy ZOC; however, if adjacent to enemy units during a friendly combat phase they attack normally. There are no other effects for being Out of Command.

The effects of supply and command are cumulative. A unit's movement rating could be quartered, and its defense halved — round up all fractions.

10.4

Headquarters are never affected by Artillery Barrage or Air Bombardment. They are affected by Normal and Assault combat.

10.5

Headquarters lost in combat are regenerated. Roll one die. The HQ is replaced that number of turns later. It is received in the same manner as a reinforcement. The HQs can be placed at any hex or map edge that serves as a supply source according to the exclusive scenario rules.

11.0 Combat

General Rule. Combat is mandatory for units in an enemy ZOC during the combat phase.

11.1

All units in enemy ZOCs must attack, and all defending units exerting a ZOC must be attacked. This may be in any combination that the attacker desires. However, the attacker must declare which units will be attacking which defenders at the start of the combat phase.

Units defending in a hex are totaled into one combined defense strength. An attacking unit may not split its combat strength, though units stacked together may attack into different hexes. Each defending unit may be attacked only once per combat phase, and each phasing unit may only attack once per combat phase.

Units with a "0" attack strength must attack, using "0" as their combat strength. So, for example, a "0" strength attacker against a "2" strength defender would attack on the "-2" line.

11.2 Attack Types

There are two types of combat by maneuver units: Normal and Assault. A player can make an unlimited number of Normal attacks per turn (within other rules restrictions). A player can declare any attack an Assault by expending one Assault Point (AP). An Assault attack causes the final combat differential to be shifted one column to the right.

Units must be in supply and in command (see Rules 9.0 and 10.0) to Assault. A Normal attack simply allows the units to attack without the benefit of a column shift. Unsupplied and Out of Command units may make Normal attacks only.

Each division is allocated a limited number of Assaults, determined by the exclusive scenario rules. When all the allocated Assaults are consumed, the units of the division can still attack via the Normal method. Expending Assault Points is always at the player's option.

11.21 Attack Type Choice

A player may make only one type of attack, Normal or Assault, against a single defending hex in a single combat phase. If more than one division is participating in an Assault against the same defending hex, each division must expend an Assault Point. Assault and Normal attacks can not be mixed in the same combat.

11.22

Assault Points may never be transferred between divisions. Assault Points have no effect on a unit's ability to defend (i.e., a player can not declare a defensive Assault).

Example: Two units from the Republican 11th division and one unit from 12th division attack the same hex. The type of attack selected is an Assault. One Assault Point from each division is consumed before the attack is made. If only the 11th division were attacking, only one Assault would consumed from its divisional track. An attack of "1,2" differential would be increased to "3,4".

11.3 Combined Arms Modifiers

If the attacker has a combined arms attack, he may gain a die roll modifier (DRM). In order to meet the combined arms criteria, the attacking force must contain at least one infantry unit and one armor unit. This adds +1 to the attack die roll. For example, a die roll of "6" would be read as a "7". If the attack also contains one artillery unit and one air unit, the DRM is +2.

Note the Combined Arms die roll modifier may be in addition to the increase in combat differential for Assault. Units may be unsupplied and get the Combined Arms DRM.

11.4 Resolution

The combat results table (CRT) is based on strength differentials, not on the odds ratios as used in most wargames. To calculate the differential, total the attacking strengths, adding in Air Points and attacking artillery barrage values. Then total the defending strengths, adding in defending Air Points and artillery. The difference between the attacking units' total and the defending units' total is found on the top row of the CRT. The attacking player rolls a die and cross-references the roll with the strength differential to find the combat result.

Be sure to take into account the type of attack, terrain modifiers, Supply (Rule 9.0), Artillery (Rule 12.0), Air Support/Air Points (Rule 13.0) and Leader effects (Rule 14.0) when determining the final differential. Also, remember any modifiers for Assault and Combined Arms.

The CRT has three basic results, given in attacker/defender order (note that results can be applied to both the attacker and defender):

  • "-" signifies no effect.
  • "S" requires that one unit in the stack take a step loss.
  • "*" means that the stack must retreat one hex.

A player can always select which of his units will be affected by a step loss, if more than one is involved in the combat.

Combat Example: The attacker has a 7-8-6 infantry unit attack a defending 3-3-6 infantry unit. The difference is a +4; so use the "+3,4" column on the CRT. The attacker declares an assault, so the column is shifted one right to "5,6". A die roll of "5" results in the defender retreating one hex. Supposing the attacker had added a 1-1-12 armor unit. The difference would be +5. The Assault would shift the column up to the "7,8" column. The die roll of "5" would be modified by the combined arms to "6," resulting in the defender losing a step and retreating.

11.5 Step Loss

Unless noted in the exclusive scenario rules, all units have a reduced side. When a "step loss" is required by the rules the unit counter is flipped over to the reduced side. A unit that suffers a step loss that is already reduced (has suffered from two step losses), or has no reverse side, is eliminated from the game.

11.6 Retreat

A retreat is a special form of movement conducted during combat. Retreats may be voluntary or mandated by combat results. Units that retreat are moved one hex by the owning player. Retreating units may never enter a hex containing an enemy ZOC, enemy unit or prohibited terrain. If the only retreat route is into a forbidden hex, then the units are eliminated instead. Stacking limits apply, and retreating units may not over-stack; they are eliminated if they are forced to do so. Retreating attackers must retreat into the hex from which they entered the enemy ZOC (if they moved in the prior movement phase), while defenders may choose which direction to retreat.

Remember, friendly units do not negate enemy ZOCs for retreat.

11.61

After the combat differential is determined, but before the die is rolled, either player may voluntarily retreat any or all of his forces. Attacker chooses first, then defender.

11.61 Voluntary retreat (clarification): Voluntary retreat before combat is chosen after the attacker has committed any artillery or air support, and/or Assault Points.

11.62

If the CRT mandates a retreat, the retreating unit(s) must retreat one hex.

11.7 Advance after Combat

Adjacent victorious units, either attacking or defending, may advance into the vacated hexes after retreats are conducted. Enemy ZOCs are ignored during such advances. Advances are conducted immediately, before moving to the next combat resolution. Units are never forced to advance. Units may not advance into or across terrain otherwise prohibited to them.

11.7 Advance after Combat (clarification): This applies to both retreats due to combat and voluntary retreats. In the case of a voluntary retreat, the other player's units may advance only if they did not also retreat.

11.8

Neither retreats nor advances expend movement points. They are not affected by Command and Supply considerations. Units may attack into terrain they could not normally enter (such as tanks across unbridged rivers). Apply normal terrain modifiers. However, units may not advance after combat into terrain they could not otherwise enter.

12.0 Artillery

General Rule. Artillery units may fire a number of hexes up to their range allowance (the parenthesized number on the counter). Count the target hex but not the firing hex when calculating range. For example, an artillery unit with a range of (8) may fire up to eight hexes away. Artillery units may engage in combat in two ways:

  1. They may fire in support of other friendly units, attacking or defending. Support fire may be applied in either the friendly or enemy combat phase.
  2. They may attack by themselves by barraging enemy hexes. Barrage attacks may only be conducted during the player's combat phase.

12.1

Artillery units may fire only once per combat phase. They may not engage in Normal or Assault attacks by themselves, but may lend support to such attacks. When firing by themselves, they use the combat procedure except that it is resolved as Barrage.

Note that artillery can fire twice in a complete turn, once in the friendly combat phase (offensive support or barrage), and again in the enemy combat phase (defensive support).

12.2

An artillery unit must be In Supply and In Command in order to Support units or conduct a Barrage by themselves (see Rule 9.0 and 10.0). Unsupplied artillery may not fire at all. An artillery unit that does not belong to any division or corps may trace Command to any HQ. Also, at least one of the supported units must also be In Command and of the same formation.

12.3 Support Fire

Artillery units may provide Support Fire to other units of the same formation to which they belong (brigade, division or corps). For example, artillery designated as part of a brigade can only be used to fire support for units of that brigade, but corps artillery can support any unit in the entire corps. An artillery unit that does not belong to any division or corps may support any unit.

12.31 Support Fire in the Attack

The attacking player may add offensive artillery to a combat. Count the range from the artillery unit to the hex being attacked to determine if the artillery unit is within range. The attacker counts all firing artillery factors and adds them to his attack strength total (which can be either a Normal or Assault attack).

12.32 Support Fire in the Defense

The defending player may add defensive artillery to a combat. Count the range from the artillery unit to the hex being attacked to determine if the artillery unit is within range. The defender counts all firing artillery factors and adds them to his defense strength total Defensive fire is assigned after attacking artillery is assigned to a hex.

Defensive Support Fire may be added only against Normal and Assault attacks, not to defend against a Barrage.

12.33

If the attack is called off owing to voluntary retreat, any artillery committed to it may not switch to another hex. The Support Fire is converted into a Barrage, instead. This is directed against any one enemy hex that was involved in the combat.

12.33 Support Fire (clarification): In the event of a voluntary retreat, the Support Fire is directed against the hex which the enemy units occupied before the retreat.

12.34

If enemy units are in more than one hex, only one hex needs to be in range for support fire.

12.4 Barrage Fire

Attacking artillery units may also independently conduct Barrage Fire against units in a hex that is not being attacked by Normal or Assault combat in that phase. Artillery units cannot conduct Barrage Fire and Support Fire in the same phase. More than one artillery unit may combine Barrage Fire against the same hex in the same combat phase.

Artillery units may Barrage up to their printed range value in hexes. Count the target hex but not the firing hex when calculating range. The attacker counts all firing barrage factors and adds them to form an attack strength total. Each defending unit is attacked individually with a separate die roll. Apply any normal modifiers for terrain. Units use their printed defense strength, except that artillery defends with a value of "1". Units do not receive a benefit for defending against a barrage behind a river.

12.41 Line of Sight (LOS)

An artillery unit conducting Barrage Fire must have a clear Line of Sight (LOS) to the target hex. LOS is determined by drawing an imaginary straight line between the artillery unit and its target hex. The LOS may not pass through hexes with forests/woods, towns, cities, or a change in elevation. If a LOS runs along a hex vertex between two hexes, and one hex is clear and one hex is blocked, consider the LOS as clear. Friendly and enemy units and ZOCs do not block LOS. An artillery unit can always fire into an adjacent hex.

Note that LOS applies only when firing Barrage, not Support Fire.

12.411 Spotting

Additionally, an In Command unit of the same formation as the Barraging artillery may "spot" for that artillery unit. In this case, trace the LOS from the spotting unit. The spotting unit may be under attack and still perform this function. In this case, artillery may fire over any type of terrain to a hex that the spotting unit can trace a LOS. LOS for spotting may be up to eight hexes in clear weather turns and four in rain/mud.

12.42

Adverse results do not count against Barraging artillery, and Barraging artillery may never advance as a result of the Barrage.

12.43

Units may not retreat before combat if attacked by Barrage alone.

Example: An artillery unit with a barrage of "6" attacks a hex containing two units (one with a defense of "3" and one with a defense of "5"). There would be two die rolls, one against the "3" unit (with a differential of "3,4") and the other against the "5" (with a differential of "1,2").

12.5 Artillery Under Attack

Artillery always defends against any kind of attack with a defensive value of "1" regardless of its printed values and supply state. An artillery unit that has been attacked by Normal or Assault combat (but not by Barrage or Air Bombardment) may not fire Support Fire in the Combat Phase it was attacked.

Artillery units firing at an adjacent hex (Support or Barrage) suffer combat results along with other friendly attacking units. Artillery units that are defending in a hex against any kind of attack suffer results normally. Adverse results do not count against artillery attacking non-adjacent hexes. Artillery units never advance after combat.

Artillery may never fire defensive support into its own hex.

12.51

An artillery unit which is adjacent to an enemy unit in a friendly combat phase must attack at least one enemy unit, using either barrage or support fire. A Barrage attack satisfies the requirement that all adjacent units be attacked.

13.0 Air Units & Air Points

General Rule. Some scenarios will call for the use of Air Units, squadrons of aircraft (typically bombers) represented by game counters. Other scenarios make use of Air Points, a numerical representation of air power allocated to a side each game turn. Air units/points function in a manner similar to artillery.

13.1 Air Units

Each Air Unit may only be used once per complete turn (either offensively or defensively). Air Units have unlimited range. They are never affected by combat results. There is no anti-aircraft fire or air-to-air combat (exception: see Scenario special rules). Air Units that provide ground support are placed in the targeted hex and their strengths are added into the final attack or defense. Air Units that conduct Barrage use the Air Bombardment Table as described in Rule 13.3.

13.2 Air Points

Air Points, a numerical representation of total air power, may be used to provide support or conduct Air Bombardments. The Air Points a player receives for a scenario may be used each and every turn. Any number of Air Points, up to the current amount, may be used to conduct Support or Air Bombardments (with each air point representing "1" combat factor). Once Air Points are used, subtract that amount from the current amount available for the turn. Unused points do not accumulate. They do regenerate at the start of each turn.

Example: If 10 Air Points are available in a turn, the player can use six to support attacks and use the other four to conduct Air Bombardments. At the start of the next turn, the player would have 10 Air Points available.

13.3 Air Bombardment

When conducting Air Bombardment, the player totals up the strength points used (if Air Units are in play) or the amount of Air Points expended and finds the proper column on the Air Barrage Table. The player then rolls a die and consults the table for the result.

If the target is in a town/city or wooden hex, add +1 to the die roll.

A result of "1" on the Air Barrage Table indicates that one unit in the hex being Bombarded must take a step loss. The choice of which unit is up to the Bombarding player. There is no retreat involved in Air Bombardment.

Note that Bombardment is resolved in its the Air Bombardment Phase, while Air Support is executed during the Combat Phases.

14.0 Leaders

General Rule. A Leader counter represents a special brigade, division or corps commander.

  • Note: this rule is not used in Jarama/Brunete, so players can skip it. It is included for the completeness of the system.

14.1

Leaders do not count toward stacking limits and may use non-mechanized or mechanized movement in the same turn, whichever offers the best movement rate, on a hex by hex basis. They are always In Supply. Leaders have no ZOC.

14.2

Units may, but are not required to, trace a Line of Command of no more than three hexes to a Leader of the same command. That Leader must, in turn, be able to trace six hexes or less to the command HQ (which be Brigade, Division, or even Corps HQ).

14.3

A Leader stacked with any friendly attacking unit of the same Command generates a +1 DRM on the CRT. If a stack that contains a Leader is forced to retreat due to a combat result, attacking or defending, the Leader may declare "Backs to the Wall". The stack takes an additional step loss and remains in the hex. If friendly units occupy more than one hex, the retreat is negated for all of them. The Leader himself does not have to be In Command to provide these bonuses.

14.4

Leaders may not attack, have no defense factor, and do not impede enemy movement in any way. If for any reason an enemy unit enters a hex containing only a leader, then roll one die. They may not be taken as step loss. On a "5" or "6", the Leader is eliminated. On a "1-4" the Leader is placed on the nearest friendly unit. Retreating Leaders follow normal retreat restrictions. Leaders are never affected by Artillery Barrage or Air Bombardment.

15.0 Reinforcements

General Rule. Reinforcements are new units introduced once the game is in progress. They are moved onto the map from the appropriate map edge or hex.

15.1

Reinforcement units and entry areas are given in the exclusive scenario rules. They may not enter via a hex containing enemy units or their ZOCs. Reinforcement units pay normal terrain costs when entering the map. Reinforcements are automatically in Supply and Command on their phase of entry.

15.2

If all entry hexes for a reinforcement are blocked, then the units enter on the turn following at the entry hex (if now unblocked) or at the nearest unblocked hex on the same map edge. There is no limit to the number of turns a reinforcement may be delayed until a suitable hex is opened. Scenarios may provide different instructions for alternative entry.

15.3

Reinforcements are automatically in supply/in command on their phase of entry.

16.0 Exiting the Map

General Rule. Units may exit the map during the course of play at the cost of 1 MP, and may do so from an enemy ZOC (while still paying the extra 2 MPs to move out of an enemy ZOC penalty). They are not considered eliminated for victory purposes. Usually they may not return to the map, unless specifically allowed by the exclusive scenario rules. However if a unit is forced to retreat off the map as a result of combat it is considered destroyed.

17.0 Weather

General Rule. There are two types of weather in the game: Clear and Rain/Mud. Roll a die during the Weather Determination Phase: a result of 1-4 indicates Clear, while 5-6 indicates Rain/Mud. However, consult the exclusive scenario rules in case other weather conditions apply. The Terrain Effects Chart shows the effects of weather.

  • Certain scenarios will change the die roll ranges determining Weather.

Combat Results Table (correction): "-5" column, die roll "5", result should be "*S/-".

Terrain Effects Chart (omission): Hill+rough also refers to any combination of hills/rough/woods.

Exclusive Scenario Rules

Jarama: 6–26 February 1937

Introduction

The battle of the Jarama was the result of General Francisco Franco's desire to capture Madrid, capital of Republican Spain. Facing a bloody stalemate in front of the city, Franco launched his Nationalist armies in a two-pronged offensive to encircle the city from the north and south. The southern arm of the thrust, an attack across the River Jarama to cut off the vital Valencia road, began on 6 February 1937.

Player Order

The Republican player sets up first. The Nationalist player sets up second. The Nationalist player will then have the Initiative for the entire game (i.e., the Nationalist player is the first player each turn and the Republican is the second player).

Unit colors (omission):

  • Republicans: red = British Internationals; white = US internationals; blue = French internationals; black = other Internationals.
  • Nationalists: gray-green = German.

Set Up

Republican (set up first):

Use the Republican unit counters (colored yellow) with the "J" printed on the upper left corner for the Jarama scenario.

Division A units (48th, 19th, 11th International, 23rd, PUA, and 1st Tank Brigade) have a horizontal light blue stripe.

Division B units (18th, 24th, 17th, 12th International, 15th, 69th, 70th, and 1st Brigade) have a horizontal gray stripe.

Deployment:

  • 48th Brigade units in hexes 3533, 3333, 3132, 2833; artillery in 3137; HQ in 3136.
  • 19th Brigade units in or adjacent to Arganda (3351).
  • 23rd Brigade units within four hexes of 2439.
  • 18th Brigade units within three hexes of 1735.
  • Two battalions of 13th Int (International) Brigade in 1653.
  • 45th Brigade units within three hexes of hex 1340.
  • 41st Brigade units in 4333, 4034, 3933, 3835; HQ and artillery in 4135.
  • 1st Tank Brigade units in or adjacent to 4436, except one company placed in Arganda.
  • 69th, 70th, and 1st Bis (Temporary) Brigades in the Madrid Box (see the Republican Reserves and Manzanares River rule below).
  • Two Sb2 air units available all turns.

Republican Deployment (omission): "A" and "B" headquarters are deployed anywhere on the Republican side of the start line.

Nationalists:

Use the Nationalist unit counters (colored magenta) with the "J" printed on the upper left corner for the Jarama scenario.

Division Varela (1st, 2nd, 3rd Brigades and all cavalry units) have a horizontal dark blue stripe.

Division Escamez (4th and 5th Brigades) units have a horizontal black stripe.

Deployment:

  • 1st Brigade units in 3532, 3329, 3129, 2929, 3431, 2729; antitank company in 2729; HQ in 3028; artillery in 3128.
  • 2nd Brigade units in 2928, 3028, 3127, 3327, 2829, 3029, 3128; HQ in 2928; artillery in 2828; all Pz I companies in 2728.
  • 4th Brigade all units within two hexes of 2229.
  • 5th Brigade all units in or adjacent to 2231.
  • All cavalry regiments place in or adjacent to 2928.
  • Place Engineer (4-4-6) unit in 2228 or 2628.
  • Ju52 and SM81 air units available all turns.

Nationalist Deployment (omission): "Varela" and "Escamez" headquarters, and "Pz/R" [Panzer Reserve] tank company, are deployed anywhere on the Nationalist side of the start line.

Nationalist Deployment 1st Brigade (correction): the antitank company is incorrectly shown as an antitank battalion in the counter mix.

Reinforcements

Republican Reinforcements (omission): When the Republican player is called upon to pick an artillery unit with no i.d., the player picks one at random.

Republican:

  • Feb 6: 5th Brigade enters in area A; 24th Brigade and the 12th Int (International) Brigade enters at 1653 (area B); 11th Int Brigade enter at Arganda; 9th Battalion enters at area A.
  • Feb 7: 17th Brigade and two artillery units (with no i.d.) enter at area A.
  • Feb 8: 67th Brigade and one artillery unit (with no i.d.) enters at area A.
  • Feb 10: 66th Brigade enters at area A.
  • Feb 12: 15th Brigade enters at 2552.
  • Feb 13: 1st Brigade enters at area A.
  • Feb 14: 14th Int Brigade enters at 2552; PUA Brigade enters at area A.
  • Feb 15: Divisions C and D HQs enter at 2552.
  • Feb 19: 70th Brigade, 1st Bis (Temporary) Brigade is released.
  • Feb 21: 69th Brigade is released.

Nationalists:

  • 3rd Brigade: all enter turn one at area C.

Note: Following reinforcements may trace command to any HQ within range. All may enter at area C, D, or E on any road on the west map edge.

  • Feb 8: 7th Victoria Battalion; Engineer (6-8-6) Battalion.
  • Feb 9: 8th Tabor Battalion; both German F/88 units.
  • Feb 10: 1st Tabor Battalion.
  • Feb 11: 1st Toledo Battalion and 2nd Tabor Battalion.
  • Feb 19: Gallego Battalion, 1st San Quintin Battalion, Canaris Battalion, and two artillery units.

Assault Points

Republican:

  • Division A: 20
  • Division B: 20

Note: Republican units not assigned to a Division (do not have a divisional stripe) can expend Assault Points from either Division.

Nationalist:

  • Division Varela: 15
  • Division Escamez: 10

Note: Nationalist units not assigned to a Division (do not have a divisional stripe) can expend Assault Points from either Division.

Victory Conditions

At the end of the game, players get VPs (Victory Points) for having their units occupying the following locations with at least one unit, and exiting units from the map. VPs for occupying hexes are awarded only if the units can trace a supply path at the end of the game. The units that exit the map must be able to trace a supply path at the end of the game to count for VPs. Trace line of supply as if the units were one hex off the east map edge and north of the Tajuna River.

Subtract the Republican total VPs from the Nationalist total to determine who won and to what extent.

CityVPs
Vaciamadrid20
Riba del Jarama25
Arganda20
Pindoque Bridge10
San Martin de la Vega10
Titulcia10
Morata de Tajuna20
Butarron, Pajares, Valdeperdices, Corbertas, Maranosa, Ciempozuelos5 each
Any Nationalist battalion or brigade that exits the east map edge, north of the Tajuna river5 each

If the result is:

  • 10 or less: Republican victory
  • 11 to 20: Nationalist marginal victory
  • 21 to 30: Nationalist substantive victory
  • 31+: Nationalist decisive victory

Special Scenario Rules & Notes

Rivers: Non-mechanized units may cross river hexes by expending an additional three (3) MPs in Good weather and four (4) MPs in Rain/Mud. Mechanized units may only cross rivers at bridges or roads. See also the Bridging Engineers rule.

Stacking: A hex may contain: two battalions (a total of six companies) or one regiment/brigade sized unit. If a regiment or brigade sized unit is in a hex, no other unit may be present.

Stacking (clarification): Companies count as one third a company for stacking; they do not stack for free. However, three tank companies count as one unit for stacking on roads. Headquarters do not count for stacking, as per 7.1.

Supply: Nationalist units trace supply to any roads that exit the west side of the map. Republican units trace supply to any roads that trace off the north, east or south map edge.

Command: Units trace to their parent Brigade HQs and then to their Divisional HQs. There are no Corps HQs—divisions are the ultimate command source for both sides.

Republican command: The HQ units of Divisions C and D may be used as command sources for any Republican units. 1st Tank Brigade units must first trace to the 1st Tank Brigade (1 Tk), then to the Division HQ (Division A); exception: the 3/1Tank companies must trace to the 3/1Tank HQ and from there to either the "1 TK" Brigade or "A" Division HQ.

Republican command (omission): Units of the 2/1 Tank Brigade trace to the 2/1 Tank Brigade HQ (which should be a battalion HQ on the counter, not a brigade).

Antitank Units:

  1. Whenever a stack containing any kind of armor or armored car units is attacking a defending force that contains one or more antitank units, the attacker's odds are shifted one column to the left, cumulative with other shifts.
  2. The Nationalist F/88 antiaircraft units represent the dreaded German 88mm guns. Whenever a stack containing any kind of Republican armor or armored car units are attacking a defending Nationalist force that contains an F/88 antiaircraft unit, the attacker's odds are shifted four columns to the left.
  3. Whenever a stack containing any kind of Republican armor or armored car units are attacking a hex adjacent to a hex containing a Nationalist force with an F/88 antiaircraft unit, the attacker's odds are shifted one column to the left. This is applied only if there is no other antitank unit in the defending force. This is applied regardless if the F/88 hex is under attack or not—it represents the longer range of the 88s.
  4. Only one antitank unit per defending combat may apply a shift.
  • Remember, the attacker may gain a combined arms bonus which shifts the odds one to the right, so in this case, use the cumulative difference of the shifts to the right and left.

Nationalist Antiaircraft Units: If a Nationalist F/88 antiaircraft unit is in or adjacent to a hex against which the Republican player is committing air units, the combat strength of those air points are halved. This may be done any number of times in a turn. The halving may be cumulative with any effects on air units for weather.

Nationalist Air Units: Because the Republicans had gained air superiority by this time, the Nationalists bombed during the night. Whenever Nationalist air units are used on the Air Bombardment Table, add 1 to the DRM. If Nationalist are units are used as support, their bomb ratings are halved.

Nationalist Effectiveness: To reflect that the Nationalists were generally more effective on the ground in this battle, shift all Nationalist attacks one column to the right, cumulative with other shifts (except for Air Bombardment).

Nationalist Bridging Engineers: The Nationalist player has bridging engineer units which each may create one pontoon bridge per game. The procedure for doing so is as follows: Move the Bridging Unit adjacent to any river hex side. If it does not move for one complete Nationalist movement phase, a bridge is considered to be emplaced across that river hex side. The hex the bridge spans is up to the Nationalist player; face the bridging unit in the direction the bridge has been constructed. Mechanized units that traverse the bridge pay an additional six (6) MPs to cross the river. All other units may cross by paying an additional two (2) MPs. The bridge remains in place as long as the bridging unit remains in the hex. The moment that the bridging unit moves out of the hex, or is destroyed in combat, the bridge ceases to exist. No more than one pontoon bridge may be built per unit per complete game.

Leaders: This rule is not used in Jarama. There are no Leaders in the game.

Republican Reserves and the Manzanares River: In the upper corner of the scenario map is the Madrid box. This holds the available reserves from Madrid – three brigades in all. If the Nationalists cross the Manzanares River or move north of hex row 41xx — west of the river — these reserves are all released. Once released, they are free to move anywhere except south or east of the Henares River. Any two units are released if any Nationalist unit moves within four hexes of La Posada, Arganda or Morata de Tajuna. If neither condition occurs, the reserves enter per the reinforcement schedule. When they enter, they remain within the defined boundaries. Units that set up within the boundary stay within that area until released. Republican Reserve units are automatically in Supply and Command until they are released (then normal Supply and Command rules apply).

Reinforcement Zones:

  • A = hexes 4838-4842
  • B = hex 1053-1653
  • C = hexes 2428-2828
  • D = hexes 2127-2327
  • E = hexes 1127-1327

Weather: Roll for weather during each Weather Phase. From turns one (1) through eleven (11), a roll of 1-4 is Rain/Mud, a 5-6 is Clear. Turns 12+, a roll of 1-2 is Rain/Mud, a 3-6 is Clear. Apply normal Weather effects, plus on Rain/Mud turns, players may use their air units, but their strength is halved (cumulative with any other halving). Also, mechanized units pay three points to enter clear and hill terrain.

Assault Points (clarification): if more than one non-divisional unit is involved in a single Assault, then only one Assault Point is expended for all of them.

Nationalist command (clarification): Nationalist battalion i.d.s are generally shown as battalion/regiment/brigade; there are no regimental headquarters (e.g., 3/7/4 battalion would be the 3rd Battalion, 7th Regiment, 4th Brigade). German Panzer companies are assigned directly to brigades, they do not form a unified command; the "Pz/R" unit which may be commanded by any friendly HQ. Nationalist 5th Brigade units all trace command directly to the Escamez Division HQ.

Brunete: 6–24 July 1937

Introduction

After months of bloody stalemate before Madrid the Republicans decided to go on over to the offensive; the only question was where. An attack south toward Brunete, west of Madrid, was intended to relieve the capital. The offensive, which began 6 July 1937, was supposed to be a Republican show of strength, with the best armor, aircraft and material allocated. The result was different than expected.

  • Note: the first turn is 5-6 July because some pre-battle movements took place on the 5th.

Player Order

The Nationalist player sets up first. The Republican player sets up second. On turn 1 the Republican has the Initiative (is the first player). On turn 2 the Nationalist has the Initiative. Beginning turn 3, roll to determine Initiative: each player rolls one die; the Nationalist player adds +1 to his die roll. The higher die roll wins the Initiative and is the first player for the turn. If there is a tie, roll again.

Set Up

Nationalists (set up first):

Note: Use the Nationalist unit counters (colored magenta) with the "B" printed on the upper left corner for the Brunete scenario.

  • Quijorna Battalion: 1511
  • Los Llanos Battalion: 1506
  • Castillo Battalion: 2707
  • Pardillo Battalion: 2403
  • La Cana Battalion: 1907
  • Vcastillo Battalion: 2805
  • Romanilo Battalion: 3008
  • 71st Division HQ: 2112 (Brunete)
  • 2nd Battalion/71st Division: 1105
  • 6th Battalion/71st Division: 1104
  • Las Rosas Battalion: 3202
  • 11th Division HQ: 3213 (Boadilla)
  • Air points as per the Reinforcement record
  • Several units have the names of towns as identifications on their counters – they are placed in those hexes.

Republicans (set up second):

Note: Use the Republican unit counters (colored yellow) with the "B" printed on the upper left corner for the Brunete scenario.

  • 11th Division: All divisional units plus one non-divisional cavalry battalion placed in or adjacent to 1603. Any two regiments of the 11th division may start loaded onto trucks.
  • 46th Division: All units in or adjacent to 1402.
  • 34th Division: All units in or adjacent to 1701.
  • 1st and 4th Tank Battalions: 1501
  • 1st Armored Car Battalion: 1501
  • 1st Brigade HQ: 1501
  • One 5th Corps and two 18th Corps artillery battalions in or adjacent to 1501.
  • Air points as per the Reinforcement record

Reinforcements

Nationalists:

  • July 7/8: 13th Division — The 1st and 4th Battalions and one artillery battalion enter at 2133. Each infantry battalion is carried by one truck. All other units of the division, plus two more trucks, enter at 3633.
  • 12th Division — All units enter between 3610 and 3614 (inclusive); the "German" artillery unit enters at 3614.
  • July 9/10: 150th Division — All units enter between 1018 and 1022 (inclusive).
  • July 11/12: The three infantry battalions labeled "Misc" enter at 3614. 5th Division – all units enter between 3614 and 3617 (inclusive). 30 Air Points are available for use during this turn only.
  • July 13/14: 4th Division — all units enter between 1011 and 1018 (inclusive). 54 Air Points are now available for use this and every turn following.

Republicans:

  • July 5/6: 20 Air Points are available for use this and every turn following.
  • July 7/8: 35th Division – all units enter at 1501. 15th Division and 10th Division – all units enter at 1701. One 5th ("V") Corps and one 18th ("XVIII") Corps artillery battalion enter at 1501.
  • July 11/12: 45th Division – all units plus the 3rd Tank Battalion enter at 1501. One 5th Corps and one 18th Corps artillery battalion enter at 1501.
  • July 13/14: 94th and 95th Regiments and one 5th Corps artillery regiment enter at 1501.
  • July 19/20: 28th Regiment enters at 1501.
  • July 21/22: 151st Regiment enters at 1501; 14th Division – all units enter at 1501 or 1701; 39th Division – all units enter at 1501 or 1701; (see special rules).

Assault Points

Nationalist:

  • 13th Division (light brown): 3
  • 150th Division (light green): 3
  • 12th Division (blue): 5
  • 5th Division (gray): 4
  • 4th Division (black): 3

Republican:

  • 11th Division (white): 6
  • 15th Division (tan): 5
  • 46th Division (orange): 4
  • 35th Division (blue): 4
  • 34th Division (purple): 3
  • 10th Division (light blue): 6
  • 45th Division (brown): 4
  • 39th Division (gray): 1
  • 1st Tank Brigade (light green): 4

Note: Divisions with Assault Points are marked on their counters by a colored horizontal stripe. Units not assigned to a Division (they do not have a divisional stripe) can expend Assault Points from any Division.

Victory Conditions

Each of the listed objective hexes are worth 1 Victory Point (VP) except: Brunete (2112), Sevilla de la Nueva (1920), Mosquito Hill (2913), and Boadilla (3213), which are 5 VP each.

Each Republican regiment that exits the map from hex 3614 awards 5 VPs to the Republican player. The units that exit the map must be able to trace a supply path at the end of the game to count for VPs. Trace line of supply as if the units were one hex off the appropriate map edge.

At the end of the game total each sides VPs. Subtract the Nationalist total from the Republican total.

If the result is:

  • 17 or less: Nationalist victory
  • 18 to 23: Stalemate
  • 24 or more: Republican victory

Special Scenario Rules and Notes

Game scale: Each hex is half a mile. Units are all regiments unless noted on the counter.

Trucks:

  1. Trucks have a mechanized movement value of twelve (12).
  2. Trucks may carry one regiment (or three battalions) of infantry per truck counter. This is done by moving the Truck unit to the hex containing the unit(s) to be embarked and placing them under the counter. It costs no MPs for a truck to pick up or drop off a unit. Once embarked, the unit travels with the Truck until the player decides to disembark, which can occur at any time in the Movement Phase. A unit must disembark by the end of the movement phase. The Truck can use any remaining MP after it has disembarked a unit. However, units which are truck transported may not move in the same phase after being truck transported; they may move prior to being picked up.
  3. Trucks also do not count for stacking, nor do they exert a Zone of Control. They are eliminated if at any time an enemy unit enters their hex for any reason (including advance and retreat). If stacked with other friendly units, they suffer combat results normally. Trucks are never affected by artillery/air bombardment.

Stacking: Regiment-sized units may not stack in the same hex. Up to three battalions and any number of companies can stack in the same hex. For stacking purposes, three battalions equal one regiment.

Zones of Control: Companies possess no ZOC. A hex with two or more battalions has a ZOC. A hex with only one battalion has no ZOC. Regiments exert a ZOC as normal.

Supply: Republican units' supply paths must exit 1501. Nationalist supply paths may exit on the east, west or south edges. Republican units on turn 1 are in automatic supply. Nationalist units that begin in Quijorna and Villa La Canada are in automatic supply until turn 3.

Command HQs:

  1. Units may trace command directly to their divisional or Corps HQ (if any). Republican divisional HQs must trace to a Corps HQ. There are no Nationalist corps HQs, so their divisions do not have to trace to a corps.
  2. For tracing Lines of Command, Republican units must be within four (4) hexes or less of their divisional HQ. Nationalist units must be with six (6) hexes (as per series rules).
  3. Republican cavalry trace to any HQ.
  4. All the Nationalist units that begin the game on the map are part of 71st Division. The "German" and "Misc" units may trace to any divisional HQ.

Line of Sight: Towns, cities and hills do not interfere for Line of Sight (LOS) purposes.

Leaders: There are no Leaders in the game; ignore rules regarding Leaders.

Weather: Weather is always Clear.

Nationalists Stand Fast: All units of the 71st Division that begin the game on the map may not voluntarily retreat prior to attack resolution. They retreat due to combat results normally.

Republican Command Rigidity: To simulate the rigidity of the Republican (i.e., Soviet dominated) command structure and the lack of training all around, the following rules are used.

  1. Objectives. Each Republican division has an objective it must Capture, based upon their historical objectives:

    • 34th Division: 1907, 2707, 3008.
    • 35th Division: 2706, 2403, 2806
    • 46th Division: 1006, 1506, 1213
    • 45th Division: 2806, 2708, 2403
    • 10th Division: 2806, 2708, 2403
    • 15th Division: 2913, 3008, 3213
    • 11th Division: Brunete (2112), 2712, 2414, 1920

    An objective is Captured when any units of the division enter the listed hexes. If another division Captures an objective that has not been assigned to it, the objective must still be Captured by the assigned division (i.e., move a unit into the hex). Aside from occupying the hex, the Objective must also be free of enemy Zones of Control.

    Units of the designated divisions may not attack into or enter hexes designated as objectives for other divisions, unless they have Captured all hexes listed as their own objectives. For example, say Division "A" has hexes A1, A2, and A3 as its objectives. Until Division "A" has Captured these three hexes it may not attack hexes designated as other divisions' objectives. If an objective hex is recaptured by the enemy, then units of the divisions to whom that objective was assigned may not attack or enter other divisions' objective hexes until it has retaken all lost hexes. This rule does not inhibit divisions in any way from attacking hexes that are not divisional objectives.

    Divisions not listed above are exempt from the requirement of Capturing objectives.

  2. Corps Boundaries. The 5th ("V") Corps HQ unit must remain west of hex row 19xx. The 18th ("XVIII") Corps HQ unit must always remain east of hex row 19xx. This does not affect other units of each Corps.

    5th Corps consists of: 11th Division, 46th Division, and 35th Division. 18th Corps consists of: 34th Division, 10th Division, 15th Division. Units not mentioned may trace to any Corps HQ.

Relief of Republican Units. The Republican player on July 21/22 receives the 14th and 39th Divisions. These divisions relieved other units in the line which were burned out in combat. Therefore, in order to receive these units, the Republican player must do the following: he must move off the map via hexes 1501 and/or 1701 all units of one division for each division received. At the instant that all surviving units of the withdrawing division are removed, then one division (14th or 39th) is received as a replacement for it (this occurs in the same movement phase). The units of the withdrawn division may be at reduced strength and component units may have been eliminated. Withdrawn units may not be returned to play. If insufficient units are withdrawn on the July 21/22 turn, then the reinforcements may be taken on any turn following in which the conditions are met. A division may be withdrawn over the course of more than one turn.

  • For example, say the 11th division is to be withdrawn. Its current strength is one full strength regiment, one reduced strength regiment, and the HQ, with the third regiment and artillery eliminated. The units of the division are withdrawn during the movement phase of July 21/22. One of the relieving divisions (say, the 14th) is then received as a reinforcement and enters the map during the remainder of the movement phase of July 21/22.
  • Historically, the 14th Division replaced the 11th Division and the 39th Division replaced the 46th Division, but players can replace any available divisions.
  • 12.51