Solomons Campaign 1942-43
Solomons Campaign 1942-43 Rulebook
Table of Contents
Table of Contents
- 1.0 Introduction
- 2.0 Components
- 3.0 Set Up
- 4.0 How to Win
- 5.0 Sequence of Play
- 6.0 Actions
- 7.0 Unit Location & Stacking
- 8.0 Movement
- 9.0 Combat
- 10.0 Reinforcements
- 11.0 Refits
- 12.0 Fog of War
- 13.0 On-Map Bases
- 14.0 Off-Map Bases
- 15.0 Random Island Locations
- 16.0 Japanese Actions
- 17.0 Japanese Random Events
- 18.0 US Random Events
- 19.0 US Actions
1.0 Introduction
Solomons Campaign, 1942–43, is a solitaire, operational-level war game of the struggle for control of the Solomon Islands during World War II. Victory is attained by accomplishing campaign milestones ahead of what was done historically, thereby opening the way for an earlier isolation of the Japanese base at Rabaul. The player commands the US forces, and moves and engages the Japanese forces according to the game system.
1.1 Game Scale
Ground units represent regiments or battalions. Aircraft units represent air groups or wings (2–8 squadrons) and are identified by the primary type of aircraft in those units. Naval units represent individual fleet aircraft carriers and battleships, divisions of two light or escort carriers, squadrons of cruisers and destroyers, and various numbers of other ship types. Each grid square (grid) on the map is approximately 50 miles from side to side. Each turn represents one month.
2.0 Components
The components of Solomons Campaign include these rules, a 22×34-inch mapsheet, and 228 9⁄16-inch counters. Players will need to provide two 6-sided dice (2d6) to resolve combat and other random game events, along with 2 wide-mouthed opaque containers for use with drawing random markers and units.
2.1 Map
The map shows the strategically critical sea areas and islands in and around the Solomons.
- Grids: All grids contain a sea portion and possibly an island or land area. Each grid contains a unique alphanumeric identification label. The operational region of the map is delineated by all the grids taken together.
- Islands: An island is contained in a single grid.
- Land Areas: A land area lies in two or more grids.
- Sea Zones: Sea zones are grids comprised entirely of ocean, with no island or land area features.
2.2 Charts and Tables
These include a Turn Record Track (TRT), Sequence of Play, Victory Point, and Japanese Targeting Priorities Tables; Terrain Key; Island Random Location Table; Japanese and US Battle Displays and Refit Tables; US Actions Track; US Task Force Displays; and a number of Japanese and US unit displays.
2.3 Counters
Most counters represent various groupings of ground, naval, and air combat units. Other counters are markers, provided as informational and game aids. A unit's nationality is shown by its background color.
- Japanese
- Naval and Air: tan with black text
- Ground: light brown with black text
- Bases: dark brown with white text
- United States
- Navy: blue with black text
- Marine and Army: dark green with white text
- Bases: light green with black text
2.4 Combat Units
Combat units include naval, air and ground units.
2.4.1 Naval Units
Naval unit counters carry these printed labels: Type, Type Silhouette, Bombardment Factor, Antiaircraft Factor, Surface Combat Factor, Antisubmarine Factor, Antiship Factor, Ship Name and Reinforcement Code. Ship types:
- Carriers:
- CV: Fleet Aircraft Carrier
- CVL: Light Aircraft Carrier
- CVE: Escort Carrier
- Surface:
- BB: Battleship
- CA: Cruiser Squadron
- CL: Light Cruiser Squadron
- DD: Destroyer Squadron
- AV: Seaplane Tenders
- MTB: Motor Torpedo Boat Squadron
- Amphibious:
- AP: Transport Ships
- APD: Attack Transports
- LST: Landing Ship Tank
- Submarines:
- SS: Submarine Squadron
- Logistics:
- SR: Service Squadron (SERVRON)
- Barge: Barges
Ship Identifications: Numbers following unit type, with the exception of fleet carriers (CV) and battleships (BB), are generic identifiers. CV and BB units are identified by ship name and, in the case of US ships, by the actual vessel number.
2.4.2 Aircraft Units
Aircraft unit counters carry these printed labels: Type, Type Silhouette, Ground Attack Factor, Air Combat Factor, Antisubmarine Factor, Antiship Factor, Range and Reinforcement Code. Aircraft types:
- Japanese
- Zero: Fighter
- Rufe: Floatplane Fighter
- Kate: Torpedo Bomber
- Jill: Torpedo Bomber
- Judy: Dive Bomber
- Betty: Bomber
- Emily: Seaplane
- United States
- A: Attack Bomber
- B: Bomber
- F: Fighter
- P: Pursuit (Fighter)
- SBD: Dive Bomber
- PBY: Seaplane
2.4.3 Base Units
Base unit counters carry these printed labels: Front, Back, Ground Combat Factor, Antiaircraft Factor, Base Level, Type Silhouette, Antisubmarine Factor, Antiship Factor, Troop Carrying Capacity and Reinforcement Code.
- Base Units: Allow airfields and anchorages to function for air and naval units, respectively.
- Level: The central number is the level of the base, with 4 being the highest and 1 the lowest.
- Movement: Base units can never move, nor can they be transported.
- Combat: Base units have antiaircraft values and, in some cases, ground values, to use if attacked (9.2).
2.4.4 Ground Combat Units
Ground units are identified by NATO-style abstract symbols. Ground unit counters carry these printed labels: Size, Ground Combat Factor, Antiaircraft Factor, Type Symbol, Unit ID, Antisubmarine Factor, Antiship Factor, Movement Factor and Reinforcement Code.
2.4.5 Ground Combat Unit Types
- Infantry
- Marine
- Engineer (Construction)
- Defense Battalion
2.5 Ground Unit Abbreviations
- Japanese
- SNLF: Special Naval Landing Force
- United States
- CB: Construction Battalion (Seabees)
- DB: Defense Battalion
- R: Marine Raiders
2.6 Ground Unit Organizational Sizes
The organizational size of ground units is indicated by the symbol atop its unit type.
- III: Regiment or Regimental Combat Team
- II: Battalion
2.7 Submarines & Surface Ships
There are two broad categories of naval units: submarines and surface ships. If a rule is said to apply to naval units, it applies to both submarines and surface ships. If a rule only applies to one of the naval categories, the terms submarine or surface ship will be used to make clear which. Any ship that is not a submarine is automatically a surface ship and vice versa.
2.8 Carrier-Based Aircraft
All the aircraft units in the game are land-based. The aircraft aboard carriers are factored into those ships' combat factors (8.3.2).
2.9 Other Markers
Other marker types are labelled Event, Reinforcement Code, Game Turn, US Event, Task Force and US Actions.
2.10 Important Terms
- Amphibious: AP, APD and LST naval units are amphibious, or "amphibs" for short.
- Carriers: CV, CVL, and CVE units are carriers. A rule said to apply to carriers applies to all three types.
- Force: A force is one or more units conducting an action.
- Functioning Base: Any island or land area with a printed airfield or anchorage symbol and a base unit is a functioning base.
- Anchorage: An anchor symbol indicating where a naval base may be built.
- Airfield: An airfield symbol indicating where an air base may be built.
- Important: While both Japanese and US ground units may occupy a grid with both an airfield and an anchorage symbol only a single base unit may be placed in the grid (13.1).
- Occupy: To occupy an island or land area, there must be at least one ground or base unit present.
- Important: An island or land area may hold both US and Japanese units simultaneously. Place ground units and landed air units in the grid. Air units flying sorties may also be placed within the grid. Naval units are considered in the sea part of the grid.
2.11 Control
- The sea zones on the map are never controlled by either side; units of both sides may be located in the same sea zone at the same time.
- The control status of islands and land areas has a bearing on determining victory conditions, as well as determining which side's forces can make use of base facilities located within them (4.0, 13.0).
- Each island or land area is always in one of the following control states.
- Uncontrolled: No ground or base units from either side are present.
- US Control: Only US ground or base units are present.
- Japanese Control: Only Japanese ground or base units are present.
- Contested: Ground or base units from both sides are present.
Important: Air and naval units may never control an island or land area, only ground or base units.
3.0 Set Up
3.1 General
Game Length: Place the GT marker in the August 1942 box. The game is complete at the end of the October 1943 game turn, unless a sudden death victory occurs prior to that game turn (4.1).
3.2 US Set Up
- US Base Units Available Display: All US base units are placed in this display.
- Nouméa/Espiritu Santo: Initial US units are placed in this off-map area.
- 1942 Reinforcements: Place all US 1942 (42) units into the US Reinforcement Display (10.2).
- 1943 Jan-May Reinforcements: Place all US 43 J/M units in the US Reinforcement Display at the start of the January 1943 GT (10.2).
- 1943 Jun-Oct Reinforcements: Place all US 43 J/O units in the US Reinforcement Display at the start of the June 1943 turn (10.2).
3.3 Japanese Set Up
- Rabaul: Important: Units deployed to Rabaul are designated by an "R" on their counter back.
- Naval: 1× CA, 1× CL, 2× DDs, 1× AP.
- Ground: 2× infantry battalions.
- Air: 2× Zero, 2× Betty.
- Guadalcanal East: Important: Units deployed to Guadalcanal are designated by a "G" on their counter reverse.
- Ground: 1× infantry battalion, 1× construction battalion.
- Important: If there are no US ground units present to contest the grid, or if Japanese units have not been removed at the end of GT 1, place a Japanese level 2 base.
- Truk: Place all other Japanese surface naval units, except for 1942 or 1943 reinforcements, at Truk. Important: Truk is considered the Available Display for all Japanese naval units, except submarines.
- Submarines Available Display: Place Japanese submarine units here, except for 1942 or 1943 reinforcements.
- Japanese Reinforcement Displays: Place all other units (air, naval, and ground) aside until the appropriate turn when they are added to the appropriate display (Air, Ground & Base Units, and Truk) (10.5). Important: Japanese ground units are placed face-down in the Ground & Base Units Display.
3.4 Random Event Pools
Place all US event markers into a pool (opaque container), and create a similar (but separate) pool for Japanese event markers.
Important: Japanese event markers labeled "43" on the counter reverse are held out of the pool until the January 1943 GT.
4.0 How to Win
There are two ways to win Solomons Campaign: Sudden Death and End Game Victory.
4.1 Sudden Death Victory
The game comes to an immediate end and the indicated side gains a Sudden Death victory if the following conditions are met:
- US Sudden Death: There are US base units or ground units, of any strength, on all islands or land areas that have an airfield symbol (not including Rabaul); and there are no Japanese air units at Rabaul.
- Japanese Sudden Death: There are no US ground or base units on the map after October 1942. Important: Ground units aboard ships or off-map do not count.
4.2 Victory Points
If neither side wins a sudden victory by the end of the last turn, total the US victory points (VP) for enemy units eliminated and objectives controlled.
Important: Only the US obtains or loses VP.
VP are awarded as follows:
- Control of Guadalcanal East/Florida Island: 6 VP
- Control of Empress Augusta Bay: 5 VP
- Control of Rendova, Treasury Islands, Vella Lavella (each): 3 VP
- Control of New Georgia South and Bougainville South (each): 2 VP
- Russell islands, Kolombangara, Buka island, Green Island (each): 1 VP
- Surviving Japanese base (each): −1 VP. Important: This does not include Rabaul.
- Eliminated Japanese CV, BB (each): 3 VP
- Eliminated Japanese CVL (each): 2 VP
- Eliminated Japanese CA, CL, CVE (each): 1 VP
- Eliminated US CV, BB (each): −2 VP
- Eliminated US CA, CL, CVL, CVE (each): −1 VP
Important: Units in Refit displays at the end of the game count as eliminated units.
4.3 Levels of Victory
Total the number of US VP to determine the type of outcome achieved.
- more than 29: US Victory
- 25–29: Draw
- less than 25: US Defeat
5.0 Sequence of Play
Solomons Campaign is played in game turns (GT). Each GT consists of a sequence of steps, or phases.
5.1 Turn Sequence
- Reinforcement Initialization: Place any reinforcements due this GT in the Japanese or US Reinforcements Display.
- US Turn
- US Random Event Phase: Randomly pick a US event marker (18.0).
- US Action Phase: Determine the number of US actions for the GT and then conduct those actions (6.3, 19.0).
- Japanese Turn
- Japanese Reinforcement Phase: Japanese reinforcements are moved to Truk, Air Available, or Ground & Base Units Displays as appropriate (10.5).
- Japanese Return Phase: Move Japanese naval units, not at Rabaul or an anchorage, to Truk, and move reduced CVs and BBs to the Refit Display (16.2.2).
- Japanese Random Event Phase: Randomly pick Japanese event marker(s) (17.0).
- Japanese Action Phase: Conduct the Japanese action for the turn (16.0).
- Japanese Counterattack Phase: Conduct any counterattacks by Japanese ground units (9.11).
- Japanese Refit Phase: Check all Japanese units in the Refit Display (11.4).
- US Naval Return to Base
- All US naval units not at an anchorage must be returned to Nouméa/Espiritu Santo (8.2).
- Reduced CVs and BBs may be placed in the Refit Display (11.2).
- Turn Record Phase: Move the Turn marker forward one space on the TRT.
6.0 Actions
Action is the term used to describe the operations the player uses to conduct intelligence, move/fight units and conduct logistics.
6.1 Types of Actions
There are four basic types of actions. They are presented within the general categories of the American staff system of World War II (19.0):
- G1 Actions: Personnel
- G2 Actions: Intelligence
- G3 Actions: Operations
- G4 Actions: Logistics
6.2 One Force, One Action
- An action involves only one force of units in one island/land area or sea zone.
- A single unit or force may potentially conduct more than one action per GT if there are enough actions to be expended.
- An action may be repeated within a single GT.
- The US and Japanese conduct actions in different manners (16.0, 19.0).
6.3 US Actions
The total number of US actions for a GT is determined at the start of the US Action Phase. This includes:
- One action (two actions for each of the first two GT) plus;
- One additional action for controlling each of the following with a functional base and no Japanese ground unit present:
- Guadalcanal East/Florida Island
- Empress Augusta Bay
- Treasury Islands
- Vella Lavella
- Rendova
plus,
- Additional actions generated by Random Event markers (18.0).
Important: Use the US Actions track on the map to record the number of actions.
6.4 Japanese Actions
- During the Japanese Action Phase, use the random event marker to determine the type of action, if any the Japanese will take that phase (16.0, 17.0).
- During the Japanese Counterattack Phase, the Japanese may potentially counterattack with all ground units on an island or in a land area where US ground units are present (9.11).
6.5 Reset
- Return the US actions marker to zero at the conclusion of the US Action Phase (5.1).
- Actions may not be accumulated for either side from turn to turn.
- Take one action, then another, until all actions have been taken.
7.0 Unit Location & Stacking
7.1 Locations of Units
Each unit may be in only one grid at any one time.
- Air units can be based on-map, in off-map bases, or flying a mission.
- Naval units may be in the water portion of any grid or at off-map bases. Exception: Carriers may never enter the sea portion of island or land areas (8.2).
- Ground units may be in off-map bases, on islands/land areas or aboard amphibious units (8.5).
7.2 Stacking
Stacking is the placing of more than one friendly unit in the same sea zone or island/land area at the same time.
7.2.1 Limits
- Islands:
- One base with a step strength of 1 or 2; and,
- Up to three ground units of any size; and,
- Up to two air units, depending on base size; and,
- One construction battalion.
- Land areas:
- One base with a step-strength of 1–4; and,
- An unlimited number of battalions and/or regiments; and,
- Up to four air units, depending on base size.
- Off-Map Bases: Have unlimited stacking and air basing (14.0).
- Air Units: Air units flying sorties have unlimited stacking in all areas and sea zones.
- Naval Units in Sea Zones: Sea zones allow for unlimited naval unit stacking.
Important: Ground units may only enter sea zones when being transported.
7.2.2 Combined Stacking
- Units of all types (ground, air and naval) may stack together in all islands, land areas, and sea zones on the map.
- Stacking limits must be observed (7.2.1).
7.2.3 US Fleet Stacking Limits
- In 1942, no more than 8 US ship units may be part of a single force.
- Starting in January 1943, the limit increases to 10 units.
- In June 1943, the limit increases to 12 units.
- This does not limit the number of US ship units that may be in a single grid, just how many may participate in a single action together (19.0).
7.2.4 Overstacking
If US units are overstacked at the start, end of, or during the execution of any US action, they are returned to the nearest base or airfield (in the case of naval and air units), or friendly island or land area in the case of ground units (7.2.1).
7.3 US Task Force (TF) Markers
Task force markers are used to reduce on-map congestion. Place the marker on the map, and put the naval units composing that TF in the corresponding Task Force Display. Those units are considered on the map for all purposes.
8.0 Movement
Naval, air, and ground units move across the map via different procedures.
8.1 General
- Movement factors (MF) and/or range are counted in terms of grids.
- Units may move horizontally, vertically, or diagonally, and in any combination of these directions.
- Forces must move together throughout an action.
- Units in a force may not break off and move separately. Exception: (19.7.6, 19.7.7).
8.2 Naval Movement
- Naval units have no MF but are moved from sea zone to sea zone.
- Naval units, with the exception of carriers, may operate in all map grids, to include island and land area grids, and off-map bases.
- Carriers may only operate in sea zones, and may never enter the sea portion of island or land areas (2.1).
- Surface naval units must cease movement upon entering a grid containing enemy surface naval units.
- Naval units may base at areas that contain an anchorage symbol with a base unit.
Important: American carriers and battleships may not be based at on-map bases (13.3).
- US naval units not at anchorages are returned to Nouméa/Espiritu Santo at the end of the turn (5.1).
8.3 Air Movement
- Air units of all types may operate from islands or land areas containing bases, and may fly over sea zones, islands and land areas.
- The presence of enemy air units in a grid does not affect the movement of friendly air units.
- Aircraft ranges are printed on the counters. Range is expressed as the maximum number of grids an air unit may sortie prior to conducting an attack. When returning from the target area or sea zone, the air unit again counts the land areas and/or sea zones it sorties through.
Example: A US B-26 with a range of 9 may attack a target 9 grids distant from its base, then return.
8.3.1 Aircraft Basing
- Air units must end actions in areas with a friendly base. If an air unit ends an action in an area without a friendly base, it is eliminated.
- An air unit must land at the base from which it started its current action unless it is rebasing (16.2.1, 19.4.1).
- If combat causes a base to be reduced below the level sufficient to support all the air units in its area, any excess air units are eliminated (player's choice) (13.3).
8.3.2 Carrier Aircraft
Carrier aircraft are factored into the strength of the carriers and do not operate separately (9.9).
8.4 Ground Movement
- Ground combat units may move one grid in a single action, moving from one land area to an adjacent, contiguous land area.
- Ground combat units may land on land areas without an airfield or anchorage, and move overland on subsequent turns into adjacent land areas.
- Ground units must cease movement when entering a land area containing enemy ground units.
8.5 Amphibious Movement
Ground units may only go to sea in friendly amphibious transport ships, or amphibs (AP, APD, LST).
- Transport capacity of each amphib is three ground units of any size.
8.5.1 Procedure
- To show a ground unit is being transported by an amphib, place the unit beneath the amphib. Boarding an amphib is not a separate action, it is a part of the overall transport action.
- While at sea, ground units are considered part of the amphib transporting them and are not attacked separately from the amphib.
- Transported ground units share the fate of the amphib on which they are embarked. If an amphib is sunk, all ground units on it are placed in the Refit Display.
Important: Amphibs are protected targets (9.7.1).
- Ground units may conduct no other actions while being transported, nor may they use their combat factors, until they disembark.
- Ground units may remain on amphibs at sea or in an anchorage with a base for any length of time.
- To disembark, the amphib must be in a grid containing an island, land area or off-map base. Place the ground units on the island or land area as part of the action.
- If an amphib is used to deliver ground units for an amphibious landing to either an enemy-controlled island or contested land area, that amphib is subject to return fire from the defending enemy units, but only from units that have a surface ship factor of "1" or more (9.13, 19.6.2).
- Return fire is conducted prior to the debarkation of ground units and is directed only against the amphib, not other surface vessels which may be present in the grid.
Important: Japanese ground units may not conduct amphibious assault but may be transported by destroyer squadrons and transports (17.10, 17.11).
8.5.2 Amphibious Landing Response
- Standard Response
- Each time a US amphibious landing is conducted a Japanese response is generated at the end of the current US action, in addition to any Random Events.
- Determine response by rolling 1d6:
- 1–2: Conduct a ground attack. If there is 1× DD and 1× AP at Rabaul, take one ground unit at random from Rabaul and move to the grid where the US landing occurred and conduct ground combat. US surface units, if present, may engage the DD and AP; if the AP is sunk, the ground unit is lost as well. Return the DD and AP to Rabaul at the conclusion of the Japanese Action Phase. Important: If no DDs or APs are present, conduct another die roll to determine a response.
- 3: Conduct an air attack. All Japanese air units in range of the amphibious landing conduct an Air-Naval Attack at the grid where the amphibious landing occurred. As a reaction, US carrier air units within range may execute a counterstrike against these air units.
- 4: Conduct a naval attack. Pick two naval units at random from Truk, ignoring carriers, subs, and transports. Place the ships in the grid where the US landing occurred and conduct a Naval Surface Attack.
- 5: Conduct a combined air/naval attack. Conduct both #3 and #4 above.
- 6: Transfer a ground unit. Pick a ground unit at random from the Ground & Base Units Display. Use the Island Random Location Table to determine the island where the unit will deploy. If the island is occupied by US ground forces, re-roll on the Island Random Location Table. If a construction battalion is picked conduct base building operations and add an infantry unit picked at random from the Ground & Base Units Display (15.0).
- Special Response
- If US ground units land on any island within six grids of Rabaul in 1942, a Truk Sortie is automatically initiated in addition to the Standard Response (17.7).
- However, the naval units are placed in the grid containing the US landing force, while any carriers deploy normally.
Important: If, in addition to the Special Response, a DR of 4 is rolled for the Standard Response, thus triggering a Naval Surface attack, that response is ignored and only the Special Response is executed. All other results on the Standard Response list are executed normally in addition to the Special Response.
9.0 Combat
Combat takes place when opposing units fight each other in the same sea zone, island, or land area grid. Exception: Carrier ranged combat and counterstrike (9.9).
9.1 General
- Japanese attacks are dictated by random events and counterattacks (9.11, 17.0).
- US attacks are usually at the player's option; however, combat is mandatory for US units when:
- They are conducting an amphibious invasion onto an island (8.5); or,
- They are conducting a move into a Japanese occupied grid of a land area; or,
- When air units end an action in a Japanese occupied grid of a land area.
- Combat may occur whenever an event/action specifically calls for it.
9.2 Procedure
- A unit must have a combat factor of "1" or more to be able to fire in one or more of the four stages listed below.
- Firing in one stage does not preclude a unit from firing again in another, provided it has a combat factor of "1" or more.
Important: Base units may never attack, but may defend normally (13.2).
- Each unit has four combat factors:
- Air combat (antiaircraft) factors are used by a unit when it fires at an enemy aircraft unit.
- Surface combat (antiship) factors are used by a unit when it fires at an enemy surface ship unit.
- Submarine combat (antisubmarine) factors are used by a unit when it fires at an enemy submarine unit.
- Ground combat (bombardment) factors are used by a unit when it fires at an enemy ground unit.
Important: If a unit's printed combat factor for a category is 0, the unit may not fire at that type of target.
- Attacks are executed in the following order:
- Air Stage: Units fire their air factor; hits are scored against enemy air units.
- Surface Naval Stage: Units fire their surface factor; hits are scored against enemy surface naval units.
- Submarine Stage: Units fire their submarine factor; hits are scored against enemy submarine units.
- Ground Stage: Units fire their ground combat/bombardment factor; hits are scored against enemy ground and base units.
- Units engage in combat by using their appropriate combat factor to fire at enemy units per each stage.
- Individual units are not assigned to fire at specific enemy units; rather, fire each unit individually and then apply the total scored hits according to targeting priorities (9.7, 9.8).
- If more hits are inflicted than there are enemy units to be eliminated, hits do not carry over from combat to combat or phase to phase.
- Each involved unit on both sides may fire once per stage, provided it has a combat factor allowing it to do so. However, a unit may not return fire if it was eliminated prior to having the opportunity to do so (9.4).
- At the completion of the Ground Stage, the battle is over; there are no multi-round battles. Units eliminated in battle are placed in their respective Refit Display.
9.3 First Fire
At the start of each battle, determine the side that will fire first. First fire is determined only once per battle, carrying through all four fire stages.
9.3.1 Determination
- For each side, roll 1d6 and apply the following die roll modifiers (DRM) (if any):
Important: All applicable DRM are applied and are cumulative.
- Japanese: +1 for ground counterattacks against US initiated attacks when the Japanese Banzai event is in effect (9.11, 17.3).
- US: +1 for various Random Event markers. No more than one such marker may be played per combat (18.1, 18.11).
- US: +1 if a Japanese-initiated air or naval combat occurs in a grid containing an island or land area.
- Ground combat units without base units: −1 for ground units defending in islands or land areas without a base unit. This does not apply to amphibious landings but does go into effect on the subsequent GT if a base has not been established (8.5).
- The side with the higher die roll (DR) wins first fire; the defender wins ties.
9.4 Combat Resolution
The firing units' combat factors are its "hit numbers," reflecting the ability to inflict damage. The side that fires first executes all fires for each stage and inflicts all losses in each, before the other side returns fire for that same stage. Roll 1d6 for the combat factor of each unit participating in that stage of combat (9.2).
- If the die roll result is less than or equal to a firing unit's number, a hit is inflicted.
- If the result is higher, there is no effect.
9.5 Effects
- Base Units: Each hit on a base reduces it one step.
- Battleships and Fleet Carriers are two-step units. If a full-strength battleship or fleet carrier receives a hit, flip it so its reduced side shows. If it takes a second hit, it is eliminated and placed in the respective Refit Display.
- All other units, including all ground units, are one-step units, and are eliminated with a single hit and placed in the respective Refit Display.
9.6 Defending Air Units
Air units based on an island or land area being attacked automatically fight attacking enemy air or ground units. There is no separate action to provide combat air patrol or defensive support. Air units must sortie and fight if their area is attacked; they may not be left on the ground.
Important: Air units at bases being bombarded by enemy naval units do not fire back at those ships. They may not return fire against enemy carrier strikes (9.9).
9.7 US Targeting Priorities
Once hits inflicted by US units have been determined, select the Japanese units that will be affected in each stage.
9.7.1 Protected Targets
When US surface ships are attacking a Japanese surface force and that force contains any carriers and/or APs, then:
- Attacks may be made against those carriers and/or APs only if at least one US surface unit is attacking each non-carrier/non-AP unit.
- US carriers, submarines, and air units are not bound by this restriction and may attack carriers and/or APs.
- Individual units do not have to be assigned to attack Japanese units, only how many will attack the protecting and protected ships.
Example 1: Four US surface units are attacking a force of two Japanese DDs and one CV. Two US ships could attack the two Japanese DDs, and the other two US ships to attack the CV. Alternatively, all four US ships could attack the Japanese DDs.
Example 2: A US submarine attacking that same Japanese force could attack the CV without the DD having to be attacked.
9.7.2 Bombardments
- When US air and naval units of any type conduct a bombardment mission against Japanese ground units, any Japanese base unit must be eliminated before any other ground units are assigned hits.
- Once the base unit is eliminated, the other Japanese units may then be hit.
- If there is no Japanese base, ground units can be targeted.
Example: A US air bomber force attacks a Japanese island held by two infantry regiments and a 2-level base unit. The bombers inflict three hits. The first two hits eliminate the base and the third hit eliminates one of the infantry regiments.
9.8 Japanese Targeting Priorities
- Japanese Attacks on US Air Units: Hits are allocated on an even basis in attacks when both fighters and bombers are involved. Losses begin with the unit type with the lowest air combat factor in a category (bomber or fighter). If one type of aircraft (fighter or bomber) is eliminated before running out of hits to distribute, then remaining hits are taken from the remaining aircraft type. If only one aircraft type is involved, then all losses are taken by that type.
- Japanese Attacks on US Naval Units: Hits are allocated according to the Japanese Targeting Priorities Table printed on the mapsheet. At least one hit must be inflicted against all units within that category before the next category is affected.
- Japanese Attacks on US Ground Units: The player determines which US units are hit, with the exception of base units, by referring to the Japanese Targeting Priorities Table.
Example 1: A Japanese naval attack against a US naval force containing two reduced CVs and three DDs inflicts two hits. Eliminate both CVs. A third hit would eliminate one DD.
Example 2: A Japanese ground attack against a US force containing two regiments inflicts two hits. Both regiments would be eliminated.
Example 3: A Japanese air raid against a US force containing a 2-level base and a regiment inflicts two hits. Reduce the base two steps and eliminate it, leaving the regiment unscathed.
9.9 Carrier Ranged Combat & Counterstrike
Carriers may attack enemy units in their own grid as part of a naval force or within range of the carrier's aircraft.
- Only carriers may launch ranged attacks and counterstrikes, not other air units that might have been targeted in the initiating ranged attack.
- At the same time, all types of units can potentially be affected by ranged strikes.
- A Japanese counterstrike must be launched if there are surviving carriers, or if there are untargeted carriers in the grid.
- Carriers use their air combat (antiaircraft) factors for combat against enemy air units (9.2).
9.9.1 Procedure
- US carriers have a range of 5 grids.
- Japanese carriers have a range of 7 grids.
- Designate the grid to be attacked. The target may be either all enemy naval units within the grid or all enemy ground and air units on an island or land area.
- The striking carrier force has automatic first fire (9.3).
- Resolve the combat according to normal procedures (9.2).
- If enemy carriers are present in the target grid, they may launch a counterstrike (9.9.2).
9.9.2 Carrier Counterstrike
If the targeted grid includes any carriers, regardless of whether they were subjects of the initial attack, they launch a counterstrike, if within range, at the force that launched the original strike. This includes carriers which survived the original strike.
- Those enemy carriers attack all naval units in the grid from which the original carrier strike was launched.
- If there are no enemy carriers in the grid, or if none survived the original attack, there is no counterstrike.
Example: A force of two US carriers makes a ranged strike against Rabaul. The US carriers would use their air factors against Japanese air units, and their ground factors against ground units. If there were Japanese carriers in the same grid as Rabaul, they must conduct a counterstrike.
9.10 Coexisting Forces & Continued Actions
- If a US amphibious landing on an island fails to eliminate all defending units, invading units reembark onto the amphibs that transported them to that island.
Important: If there are insufficient amphibs due to defensive fire, select excess ground units and eliminate them (9.13).
- If a US amphibious landing fails to eliminate all Japanese ground units on a land area, all surviving US invading units remain in the area.
- During the Japanese Counterattack Phase Japanese ground units in the area conduct a counterattack against those US units (5.1, 9.11).
- If those US units survive the counterattack, they may be used to attack in ensuing US Action Phases. Such efforts require the expenditure of an action, and if no action is taken, no US attack takes place (19.5.1).
9.11 Japanese Counterattacks
During each Japanese Counterattack Phase, conduct attacks with Japanese ground units located in the same island or land area grid as US units.
Important: Base units may not participate in counterattacks (13.2).
- Execute each attack with the Japanese as the attacker and the US as the defender.
Important: First fire must still be determined (9.3.1).
- There is no air or naval support for the Japanese. US ground and air units on the island or land area grid may fire.
- If neither side is eliminated, an attack may be launched, but is not required, with US forces in the following US turn. This requires an action (19.5.1).
9.12 Coastal Bombardments
Naval units may use their bombardment factor to attack ground units on an island or land area. Only defense battalions in that area may return fire.
Important: US naval bombardment cannot be used defensively (9.11).
9.13 Coastal Defense
- US defense battalions and regimental-size ground units for both sides have an anti-ship combat factor of "1" to be used to fire defensively against enemy naval units engaged in bombardment or amphibious landings (19.3.6, 19.6.2).
- Ground units with anti-ship combat factors may not return fire against carrier units conducting ranged strikes (9.9).
Example: Two Japanese BBs conduct a bombardment of an island with a US defense battalion. The defense battalion would fire at the BBs in the Surface Naval Stage of the combat sequence using its antiship factor. The BBs would use their bombardment factors against the defense battalion in the Ground Stage (9.2).
10.0 Reinforcements
10.1 General
Units that appear in the game after play has started are reinforcements (3.0). Reinforcements are placed in each side's Reinforcement Displays until various game actions or specific instructions call for their deployment (10.6, 19.1.1).
- When conducting a Reinforcement Action, pick reinforcements at random from the respective reinforcement pools (19.1.1).
- Once picked, units are placed on the map as directed.
10.2 US Year Group Reinforcements
- Units designated "42" reinforcements are placed in the US Reinforcement Display.
- Units designated "43" reinforcements are split into two groups—those available during 1943 Jan–May and 1943 Jun–Oct.
- On the January 1943 GT, add the 1943 Jan–May (43 J/M) reinforcements to the display, then, on the June 1943 GT, add the 1943 Jun–Oct (43 J/O) reinforcements to the display.
10.3 US Reinforcement Deployment
- US Naval Units may enter via:
- Nouméa/Espiritu Santo; or,
- At any naval base (anchorage with a US base unit) with no Japanese naval units in that same grid; or,
- In the same grid as the SERVRON and no Japanese naval units.
Important: BBs and CVs may only enter via Noumea/Espiritu Santo.
- US Air Units may enter via:
- Nouméa/Espiritu Santo; or,
- On a US airfield (with base unit) within stacking limits.
- US Ground Units may enter via:
- Nouméa/Espiritu Santo; or,
- At any US naval base within stacking limits. There can be no Japanese naval units in that grid.
10.4 Automatic Embarkation
If US reinforcements include both ground and amphib units, the ground units may be embarked on the amphibs within capacity, and then deployed with the amphib (10.3).
10.5 Japanese Reinforcements
- Japanese 1942 reinforcements are placed in the Japanese Reinforcements Display at the beginning of the September 1942 GT and then moved to the appropriate display (Air, Ground & Base, or Truk) during the Japanese Reinforcement Phase (5.1).
- At the start of the January 1943 GT all Japanese "43 J/M" units are placed in the Japanese Reinforcements Display and then moved to the appropriate display during the Japanese Reinforcement Phase.
- At the start of the June 1943 GT all Japanese "43 J/O" units, along with all Japanese "43" air and naval units, are placed in the Japanese Reinforcements Display and then moved to the appropriate display during the Japanese Reinforcement Phase.
Important: Japanese ground units are placed face-down in the Ground & Base Units Display.
10.6 Japanese Reinforcement Deployment
- Submarines: In the Submarine Available Display.
- Surface Naval Units: At Truk.
- Air Units: Distribute air units to airfields with available capacity.
- For each air unit use the Island Random Location table to determine placement (15.0).
- If deploying an air unit would exceed that airfield's capacity, the air unit is placed in the Air Available Display.
Important: Islands must have functional airfields. If an island does not have a base unit, continue rolling on the Island Random Location Table until air units are placed.
- Ground Units: After being placed in the Ground & Base Units Display, for each ground unit use the Island Random Location Table to determine placement on the map (15.0).
- If the island or land area is not neutral or Japanese-controlled, or if there are US naval units in the grid, return the unit to the Japanese Ground & Base Units Display. Do not pick a substitute.
11.0 Refits
11.1 General
When a unit is eliminated in combat, place it in the respective Refit Display. Eliminated units, and reduced CVs and BBs, may be returned to play via refit.
- Refit for US forces may be chosen as an action (19.7).
- Refit for the Japanese must be conducted during their Refit Phase (11.4).
11.2 US Refit Actions
- For a single refit action, any one category of US units for refit may be designated: naval (all types), air or ground.
- For each unit of that type in the Refit Display, roll 1d6 and refer to the Refit Table.
Important: Damaged (reduced) CVs and BBs receive a +1 DRM for refit actions.
- Eliminated base units are not refit, but are re-built anew via base building action (19.7.1).
11.3 Refit Table Outcomes
- Deploy: Place the unit on the map in the same manner as a reinforcement (10.0).
- Damage: Place the unit in the US reinforcement pool.
- Destroy: Permanently remove the unit from play.
11.4 Japanese Refits
- All eliminated Japanese units are placed in the Japanese Refit Display.
- During the Japanese Refit Phase, execute the refit procedure for each unit in the display using the Japanese Refit Table.
- Roll 1d6 for each Japanese unit and refer to the Refit Table.
Important: Damaged (reduced) CVs and BBs receive a +1 DRM for refit actions.
- Japanese refits are placed in the same manner as reinforcements (10.5).
- Japanese units in the Refit Display may be examined.
- Unlike the US, all types of Japanese units are automatically available for refit as part of this phase.
12.0 Fog of War
Japanese ground units are only revealed if:
- There is a US ground unit in the same grid.
- An amphibious landing is made into a grid containing a Japanese ground unit (8.5, 9.10).
- G2 actions allow for examination of Japanese forces (19.2).
- A Random Event may call for certain units to be used.
Once revealed, Japanese ground units remain revealed.
Important: Japanese base unit strengths are always known.
13.0 On-Map Bases
There are two types of bases printed on the map: airfields and naval anchorages. To function, a base must have a base unit with it.
13.1 Base Unit Immobility
Base units represent major logistical installations and are immobile.
- Only one base unit may be in any given area at any time; a US and Japanese base may not be located on the same island or land area.
- Example: A Japanese base may not be built on Florida Island if a US base is built on Guadalcanal East (grid S5.4), and vice versa.
- If a grid contains both an anchorage and an airfield, only one base unit is necessary.
- Example: Only one base is necessary for grid S5.4.
13.2 Base Unit Strengths
Bases are multi-step units. Each hit on a base reduces its strength by one step. When it goes below "1" it is eliminated.
- A reduced US base's strength can be increased by conducting a base building action (19.7.1).
- Base units may never participate in attacks or counterattacks, but may defend normally against ground attacks (9.2, 9.11).
Important: Even if a base has combat values of "0", it must still be attacked to be destroyed.
13.3 US Base Special Rules
- If the US has a base on an airfield, the number of US air units that may operate from the airfield is equal to the step-level of the base.
- If a base is reduced below the current number of air units operating from it, excess air units must be immediately placed into the Refit Display.
- Example: A US level-4 base has four air units. If a Japanese attack reduced the base to level-2, then two of those air units would be put into the Refit Display.
- A US base of any level on an anchorage symbol provides basing for surface ships; except for carriers and battleships.
- Bases are used to enter certain reinforcements and refitted units.
- A US base may not be built and have its strength increased in the same GT (19.7.2).
- Bases are required for certain G4 actions (19.7).
13.4 Japanese Base Special Rules
- Japanese bases may not be refit. When reduced they remain so until eliminated, after which they are removed from play.
- Functional Japanese airfields are used to determine range for Japanese air attacks and may reduce the number of US victory points (4.3).
- The Rabaul base cannot be eliminated or reduced. Rabaul also may permanently base eight air units.
Important: Rabaul is considered a permanent base and does not require a base unit.
14.0 Off-Map Bases
Off-map bases represent major logistical installations in areas near the theater of operations.
Important: Off-map bases for both sides are printed on the map but are considered off-map locations.
14.1 General
The US off-map base is at Nouméa/Espiritu Santo. The Japanese off-map base is at Truk. Each side always controls its off-map bases. They are always functional.
- Neither side may move their units to, or in any way attack into, the enemy's off-map bases.
- An unlimited number of units of all unit types may be in an off-map base.
- A unit ceases movement for an action upon entering an off-map base (8.0).
14.2 Seaplanes
Seaplane (PBY) units must be based at an off-map base or at a friendly anchorage occupied by a seaplane tender (AV). A single seaplane tender can base an unlimited number of seaplanes (2.4.2).
- If the tender is sunk, any seaplanes based with the tender at that time are eliminated.
15.0 Random Island Locations
Various actions will require islands/land areas to be randomly determined. Using the Island Random Location Table printed on the mapsheet, roll 2d6 and cross-index to identify the island.
16.0 Japanese Actions
The Japanese operate within the following parameters.
16.1 Japanese Event Markers
During the Japanese Random Event Phase, one Japanese Event marker is picked.
Important: Once US ground forces land in the northern Solomons (grids beginning with an "N" designator), pick two Events per GT.
- Japanese events dictate Japanese actions. After playing, the marker is either discarded, retained, or returned to the pool of Japanese markers (17.0).
16.2 Japanese Deployments & Returns
- If there are insufficient Japanese units of a particular type available as called for by an event, use all available units of that type.
- Japanese units may be deployed even if there are US units in that same grid.
- Japanese naval and air units are generally not kept deployed on the map (they appear only to execute operations) unless based at an anchorage or airfield with a base unit.
16.2.1 Air Units
Japanese air units remain on the map until the end of their mission.
- Surviving air units are returned to the Air Available Display or airfield from which they sortied.
- Eliminated air units are placed in the Refit Display (11.4).
16.2.2 Naval Units
Unless eliminated, Japanese naval units remain on the map until the ensuing Japanese Return Phase (5.1).
- During the Return Phase, remove all Japanese naval units from the map and place them in Truk.
- CVs and BBs that have been reduced from full strength to their reverse side are placed in the Refit Display (11.4).
17.0 Japanese Random Events
Section headings are given in numerical order; the printed rules sheet lays the events out in two columns.
17.1 Air-Naval Attack
Roll 1d6 and randomly pick the resulting number of Japanese air units from airfields within range of the northernmost US naval unit or force. If more than one US naval unit or force is of equal distance, roll 1d6 to determine which unit or force to use.
Important: If the number of available air units does not satisfy the die roll result, randomly pick additional aircraft from the Air Available Display and deploy them in the target grid. The air units must be within range of a Japanese airfield. Base capacity limits must be adhered to and more than one airfield can be used.
- Japanese units execute an air attack against the US naval units (9.2).
- Any US ground and air units in that grid may not participate.
- Surviving Japanese air units are returned to their airfields, with excess units returning to the Air Available Display. Place eliminated Japanese units in the Refit Display.
- If no US naval units are present on the map, treat this as a No Event and pick another marker.
- Return the marker to the pool.
17.2 Air-Ground Attack
Roll 1d6 and randomly pick the resulting number of Japanese air units from the Air Available Display and deploy them on the northernmost island or land area occupied by a US ground unit. If more than one island or land area is of equal distance, roll 1d6 to determine which location to use.
Important: Only one island or land area with a US ground unit may be attacked.
- The selected air units must be within range of a functional Japanese airfield. If the range of a selected air unit is insufficient to reach a functional airfield, that unit is not used and no replacement unit is selected. Base capacity limits must be adhered to; however, more than one airfield can be used (7.2.1).
- The Japanese units execute an air attack against US ground and air units (9.2).
- Any US naval units in the grid containing the island/land area do not participate.
- Return all surviving Japanese air units back in the Air Available Display. Eliminated units are placed in the Refit Display.
- If no air units are in the Air Available Display, treat this as a No Event and pick another marker.
- Return the marker to the pool.
17.3 Banzai
All Japanese ground forces that participate in the Japanese Counterattack Phase during the GT receive a +1 DRM for first fire die rolls (9.3).
- If no counterattacks will be conducted by Japanese ground units during the Japanese Counterattack Phase, treat this as a No Event and pick another marker.
- Return the marker to the pool.
17.4 Naval Bombardment Attack
Roll 1d6 and randomly pick the resulting number of Japanese naval units from Truk and deploy them in the sea zone containing the northernmost island or land area occupied by a US ground unit. If more than one island or land area is of equal distance, roll 1d6 to determine which location to use.
Important: Only one island or land area with a US ground unit may be attacked.
- If a carrier, submarine, seaplane tender or transport is picked, return it to Truk and pick another naval unit.
- If there are US naval units in the sea zone, the Japanese units execute a naval attack against them (9.2).
- Surviving Japanese naval units execute a bombardment of the US ground units (9.2).
- Any US defense battalions fire in return (9.13).
- Surviving Japanese units remain in the sea zone until the Return Phase (5.1). Place eliminated Japanese units in the Refit Display.
- Return the marker to the pool.
17.5 Naval Surface Attack
Roll 1d6 and randomly pick the resulting number of Japanese naval units from Truk and deploy them in the northernmost sea zone containing a US naval unit. If more than one US naval unit is of equal distance, roll 1d6 to determine which to use.
- If a carrier, submarine, seaplane tender or transport is picked, return it to Truk and pick another naval unit.
- Execute a Japanese naval attack against the US naval units in that zone (9.2).
- Surviving Japanese units remain in the zone until the Return Phase, at which time they may return to either Truk or Rabaul (5.1).
- Place eliminated Japanese units in the Refit Display.
- If no US naval units are present on the map, treat this as a No Event and pick another marker.
- Return the marker to the pool.
17.6 Submarine Attack
Pick a Japanese submarine unit from the Submarines Available Display at random. Roll 1d6.
- If result is an odd number: Execute a Japanese naval attack with the submarine unit against the northernmost US naval units. If more than one US naval unit is of equal distance, roll 1d6 to determine which to use (9.2).
- If result is an even number: Nothing happens, but repeat the procedure against the next northernmost US naval unit until an attack is carried out.
- Surviving Japanese submarines remain in the grid until the Return Phase (5.1). Place eliminated Japanese units in the Refit Display.
- If no US naval units are present on the map, treat this as a No Event and pick another marker.
- Return the marker to the pool.
17.7 Truk Sortie
Select at random half of the ships (rounded up) in Truk. If a submarine, seaplane tender or transport is picked, return it to Truk and pick another naval unit.
- Deploy the Japanese naval units into the northernmost grid containing a US naval unit and conduct a naval attack. If more than one US naval unit is of equal distance, roll 1d6 to determine which to use. (9.2).
- If any carriers are drawn, place them three grids north and three east of the US force to be attacked, along with one-half of any cruisers. light cruisers and destroyers drawn with the carriers, then launch a carrier air attack on US ships (9.9).
Important: If placing carriers three grids north and three grids east of the US force would result in the carriers being placed off the map, place them as many grids to the north and east as possible while remaining on the map.
- The remaining surface units may also conduct a naval attack on US units (9.2).
- Surviving Japanese units remain in the zone until the ensuing Return Phase, at which time they may return to either Truk or Rabaul (5.1).
- If no US naval units are present on the map, treat this as a No Event and pick another marker.
- Discard this marker after playing.
17.8 Operation KA
Select the US force that has the largest number of aircraft carriers. If no carriers are present, select the largest force of US ships. In the event of a tie, pick a force via a die roll.
- Roll 1d6, add six to the result, and pick the resulting number of Japanese air units from the Air Available Display.
- The selected air units must be within range of a functional Japanese airfield. Capacity limits must be adhered to; however, more than one operating airfield can be used (7.2.1).
Important: Air units from Rabaul may be added to complete the required force.
- Deploy them into the target grid and conduct an attack against US naval units as an air-naval attack (9.2).
- Return surviving Japanese air units to the Air Available Display.
- Move all Japanese naval surface units in Truk to a grid near the US force as determined by the result of rolling 1d6:
- 1: Three grids to the south;
- 2–3: Three grids to the west;
- 4: Five grids to the north;
- 5–6: Two grids to the east.
- If the designated grid is off the map, roll again. If there are any US units in the grid into which the Japanese units are deploying, the US units in that grid are ignored and do not participate in the ensuing combat.
- If there are carriers as part of the Japanese force, conduct a carrier strike against the targeted US naval force (9.2).
- The US may conduct a counterstrike against the Truk force (9.9.2).
- Surviving Japanese naval units remain in the sea zone until the ensuing Return Phase (5.1).
- If no US naval units are present on the map, treat this as a No Event and pick another marker.
- Discard this marker after playing.
17.9 Barges
Important: Place the Barge marker in the Japanese Event pool at the start of the January 1943 GT.
All Japanese ground forces that participate in a Japanese Counterattack Phase in a grid with a barge unit, receive a +1 DRM to their first fire DR (9.3.1). Starting with the southernmost deployed Japanese ground unit(s), roll 1d6:
- 1–4: Deploy a barge unit;
- 5–6: Deployment fails; proceed to the next island area to the north with Japanese ground units, working towards Rabaul.
- Continue the process until both barge units have been deployed or there are no more island areas containing Japanese ground units.
- Barge units not deployed are placed in the Ground & Base Units Display, and an attempt to redeploy may be made on a following GT.
- Barges may not be deployed to Rabaul.
- Return the marker to the pool. If drawn again, use only if there are barge units in the Ground & Base Units Display.
- Barge units are removed if a grid has an operating US naval base with an MTB unit in the grid or an adjacent grid, or if there are no longer any Japanese ground units in that grid. Return the barge unit to the Ground & Base Units Display and attempt to redeploy on the following turns.
- Barge units are automatically sunk if attacked by US air or naval units. Return the barge unit to the Ground & Base Units Display and attempt to redeploy on following turns.
17.10 Tokyo Express
Important: Place the Tokyo Express marker in the Japanese Event pool at the start of the January 1943 GT.
Move one or more ground units, depending on how many ground units are present and selected at random, from Rabaul to reinforce the southernmost Japanese ground unit.
Important: There must be at least one DD or AP unit at Rabaul.
- If US naval units are in the grid to which the ground unit is being moved, they may not engage the DD or AP in surface combat (9.2).
- To determine delivery of each ground unit, roll 1d6:
- 1–4: Deploy ground unit; return DD or AP to Rabaul;
- 5–6: Keep ground unit and DD or AP at Rabaul.
- Return the marker to the pool.
17.11 Operation KE
Important: Place the Operation KE marker in the Japanese Event pool at start of the January 1943 GT.
Redeploy the southernmost Japanese ground unit(s) to Rabaul. If there is more than one unit available select a unit at random;
- One unit may be evacuated for each DD at Rabaul.
- Determine the ability to evacuate each ground unit by rolling 1d6:
- 1–2: Withdraw the ground unit to Rabaul;
- 3–6: Failure to evacuate; keep the ground unit in place.
- Return the marker to the pool.
17.12 Ground Attack
[J]apanese ground units attack all US units occupying the same island or land area (9.2).
Transcription note: the printed rules sheet shows "apanese" with the initial letter missing; the initial letter is restored here in brackets.
- Return the marker to the pool.
17.13 Deploy Ground Combat Units
Important: If drawn on or after the January 1943 GT, conduct the procedure twice if ground units are available.
Deploy ground combat units picked at random to Rabaul, Bougainville South, or other islands and land areas not occupied by US ground forces.
- To determine placement, for each ground combat unit in the Japanese Ground & Base Units Display roll 1d6:
- 1: Place at Rabaul.
- 2: Place at Bougainville South.
- 3–6: Use the Island Random Location Table to determine the island (15.0).
- If no Japanese ground units are available, treat this as a No Event and pick another marker.
- Return the marker to the pool.
17.14 Place Construction Battalion
In order to construct a base at either an airfield or anchorage symbol, a construction battalion must first be placed.
For each construction battalion in the Japanese Ground & Base Units Display:
- Use the Island Random Location Table to determine an island or land area for placement (15.0);
- The island or land area must be free of US ground units. If the island or land area is occupied by US ground forces, roll again on the Island Random Location Table.
- In addition, pick at random a ground combat unit from the Ground & Base Units Display and place it with the construction battalion.
Important: An AP unit must be present either at Rabaul or Truk.
- Once a construction battalion is placed on an island or land area, a level-2 or level-4 base unit, depending on whether the location is an island or land area, appears at the beginning of the next Japanese turn and the construction battalion is returned to the Ground & Base Units Display.
- In addition, a level-2 or level-4 base, depending on the location, may be placed with all other construction battalions already on the map if a base is not already present.
Important: Reduced bases may not be restored (13.4).
- Return the marker to the pool.
17.15 Operation I Go
Conduct a maximum air effort against US units nearest to Rabaul. If there are any air units in the Air Available Display, roll 1d6 and randomly pick the resulting number of air units;
- If there are not enough air units available in the Air Available Display, randomly pick enough air units from any airfields within range of the US units to be attacked.
- Conduct an air attack against any US air units in the grid (9.2).
- Any surviving aircraft attack US naval units in the grid.
- Any surviving aircraft attack ground units in the grid.
- Return surviving air units to any airfield within range with available capacity; if none, return to Air Available Display.
- Discard the marker after playing.
17.16 Yamamoto
Important: Place the Yamamoto marker in the Japanese Event pool on the January 1943 GT.
Yamamoto commits all available forces.
- Reinforce Rabaul by picking, from the Japanese Ground & Base Units Display, the Japanese Air Available Display, and Truk: two ground combat units, two naval units (not carriers or barges), and enough air units to bring the airfield to full capacity.
- For each airfield and anchorage not occupied by US forces, from north to south, roll 1d6:
- 1–2: No action.
- 3–5: Place one ground combat unit from the Ground & Base Units display.
- 6: Place two ground combat units and a construction battalion (if available) from the Ground & Base Units Display.
- The construction battalion executes base building the following GT and is returned to the Ground & Base Units Display the following GT.
- Return the marker to the pool.
17.17 Air Reinforcements
Important: Place the Air Reinforcements marker in the Japanese Event pool on the January 1943 GT.
Add air units at available airfields. To determine placement, for each air unit in the Available Display, roll 1d6:
- 1–2: Unit is not deployed and is returned to the Available Display.
- 3–4: Place at Rabaul.
- 5–6: Place at the next available airfield, within capacity, south of Rabaul.
- Placement cannot exceed the capacity of airfields (7.2.1).
- Return the marker to the pool.
18.0 US Random Events
18.1 Halsey
Execute either of two options:
- Take one additional G3 Naval Action (19.3); or,
- Receive +1 DRM to any one US first fire DR for one combat involving US surface ships (9.3.1).
- Play immediately and then return the marker to the pool.
18.2 Logistics Reorganization ("Pacific Express")
Execute either of two options:
- Take one additional G1 Reinforcement Action (19.1.1); or,
- Take two additional G4 Actions (19.7).
- Play immediately and discard after use.
18.3 Nimitz
Take two additional actions of any type.
- Play immediately and then return the marker to the pool.
18.4 Island Hopping
For each of the following random events, one additional G3 amphibious assault may be conducted (19.6.2):
- Operation Cleanslate
- Operation Toenails
- Operation Goodtime
- Operation Blissful
- Operation Cherry Blossom
- Retain each until used, then discard.
18.5 Fifth Air Force
Conduct one additional G3 air action (19.4) each GT using Army aircraft only.
- Retain for the remainder of the game.
18.6 Tactics
Receive +1 DRM to any one US first fire DR for this GT (9.3.1).
- Return the marker to the pool.
19.0 US Actions
19.1 G1 Actions
19.1.1 Call for Reinforcements
Roll 1d6, then randomly draw that number of units from the US Reinforcement Display. Place those units according to US reinforcement deployment rules (10.0).
- If the die roll is higher than the number of units in the pool, all available units are drawn.
19.1.2 Call for emergency amphibious or construction battalion replacements
Conducted only if there are AP, APD, or LST and/or construction battalions in the Units Destroyed Display. Select one AP, APD, or LST, or one construction battalion, and deploy it as a reinforcement; no refit is required.
19.1.3 Appeal to the Joint Chiefs
Roll 1d6.
- If result is an odd number: Nothing happens.
- If result is an even number: Pick one US event marker (18.0).
- This is in addition to the normal random events procedure, and counts as carrying out an action.
- Conduct a maximum of once per GT.
19.2 G2 Actions
19.2.1 Aerial Scouting
Designate a grid containing Japanese units of any type located within four grids of a grid containing at least one US airfield or carrier.
- Examine all Japanese units of all types in the grid.
- Scouting units do not move, nor does this action generate any combat.
19.2.2 Long-range Scouting
Same as (19.2.1) except this may be performed using a US airfield containing at least one bomber unit or a sea zone containing a seaplane (PBY) unit or a seaplane tender (AV).
- Conduct long-range scouting up to a maximum distance of eight grids.
19.2.3 ULTRA Intelligence
Roll 1d6.
- If result is an even number: No result.
- If result is an odd number: Select one of the following:
- Examine all Japanese units on the map; or,
- Pick a Japanese event marker and examine it. During the ensuing Japanese turn, do not pick an event marker but instead play the event marker drawn (17.0).
19.3 G3 Naval Actions
19.3.1 Conduct naval operations
Place a naval force or individual naval unit on the map from off-map.
- The force may not be placed in the same area as Japanese naval units.
19.3.2 Move a force of naval units from a sea zone to Nouméa/Espiritu Santo
Same as (19.3.1), but in reverse.
- The force is moved to Nouméa/Espiritu Santo.
- The force need not begin its move in the sea zone immediately adjacent to Noumea/Espiritu Santo.
- The moving force may not attack and must cease movement in Nouméa/Espiritu Santo.
19.3.3 Use naval units in a sea zone to attack a Japanese naval force (9.2).
19.3.4 Rebase naval units
- The force must start and end its move in a grid containing a base, at Nouméa/Espiritu Santo, or with the SERVRON (2.4.1).
- The SERVRON may be, but does not have to be, part of the rebasing force.
- The force may not start in nor enter a grid containing any Japanese units of any type.
- Ground units may be transported normally (8.5).
19.3.5 Move a force of naval units from grid to grid & attack
The moving force ends the movement portion of this action by entering a grid containing Japanese units and then conducts a naval attack (9.2).
- The attack may include friendly naval units already in the grid.
- If there are no Japanese units in the grid, forces may conduct an unopposed landing (8.5.1).
19.3.6 Use naval units in a grid to bombard Japanese ground units in that same grid
If a bombardment is made into a contested land area, it may not include the participation of friendly land and air units already there. Exception: (19.6).
19.3.7 Launch a carrier air strike
Carriers, along with escorting naval units, may first move within range of the target grid (9.9). Those carriers then use their target-appropriate combat factors against Japanese forces in the target grid (9.2).
- Carriers may attack either Japanese naval forces or ground/air forces.
- Surviving Japanese carriers in the targeted grid may then conduct a counterstrike (9.9.2).
19.3.8 Use amphibious units to transport ground units
AP, APD and LST may perform this action. The amphibs must start or move to a grid containing friendly ground units, and there may be no Japanese naval units in that same grid. The amphibs pick up the ground or air units and this combined force may then be moved to the target grid.
- At the end of the move, the transported ground/air unit(s) may stay aboard the amphibs or may disembark into any land area in the same grid or off-map base.
- If the area is Japanese occupied, this may trigger an amphibious assault (8.5.1).
- Other naval units may accompany the transporting amphibs and engage any Japanese surface units in the grid.
19.4 G3 Air Actions
19.4.1 Rebase a force of aircraft from a friendly base to another friendly base
Move one force of air units up to twice the range of the air unit.
- The takeoff and landing airfields may be in contested areas (2.11).
- Noumea/Espiritu Santo may be used as either the takeoff or landing grid (14.1).
- Rebased forces may not conduct combat as part of this action.
19.4.2 Launch a land-based air strike on Japanese ground and/or air units in an island or land area
Move one force of air units based in one island or land area to another island/ or land area in range, then attack Japanese ground and/or air units.
- If there are any friendly air units already in that target area, they may join in the attack.
- Air units must return to the airfield from which they originated the action (8.3.1).
- This action may not be combined with an attack by carrier aircraft (9.9).
19.4.3 Launch a land-based air strike into a sea zone
Move one force of air units based in one island or land area to any sea zone in range, then attack Japanese naval units there.
- Air units must return to the airfield from which they originated the action (8.3.1).
- This action may not be combined with an attack by carrier aircraft (9.9).
19.5 G3 Ground Actions
19.5.1 Use a ground force in an island or land area to attack the Japanese force in that same area
Initiate an attack in a land area containing US ground and Japanese units (9.2).
19.5.2 Move a ground force from one land area to an adjacent land area and make an assault
- If the land area is Japanese-occupied, the ground combat force must attack those units, which is resolved as part of that same action (9.2).
19.6 G3 Combined Actions
19.6.1 Make a combined air-ground attack
Move, or already have in place, ground units in an island or land area and conduct an attack.
- Add any one force of air units in range, per a land-based air strike action (19.4.2).
19.6.2 Make a combined naval-ground-air amphibious landing
The same as (19.3.8), plus disembark one ground force transported by amphibs onto an island or land area in the same grid, then conduct an attack against Japanese ground units in that area (9.2).
- The amphib force may have just moved as part of this action via amphibious transport, or it might have started already in the same grid as the island to be assaulted.
- It may also include the participation of friendly ground units already in the area being assaulted.
- As part of this action the participation of friendly naval units located in the same sea zone may conduct bombardment (19.3.6).
- Carrier units may also participate but may not be present in the same grid as the landing (8.2).
- One force of air units that can fly in, or are already in the area, may be added (19.4.2, 19.6.1).
- Ground forces are subject to counterattack from any remaining Japanese ground units (9.11).
19.7 G4 Logistics Actions
19.7.1 Build a base
- There must be a construction battalion in an island or land area that does not contain a base, but has an airfield or anchorage symbol.
- The grid must contain an AP, APD, LST or SERVRON.
- Place a level-2 base in the area (13.2).
19.7.2 Increase the strength of a base
- There must be a construction battalion in an island or land area containing a base, along with an AP, APD, LST or SERVRON.
- Raise the base two levels.
- The level of a base may not be raised on the same GT in which the base was built (19.7.1).
- The quantity of counters is an intentional limit.
19.7.3 Refit naval units in the Refit Display (11.2).
19.7.4 Refit air units in the Refit Display (11.2).
19.7.5 Refit ground units in the Refit Display (11.2).
19.7.6 Conduct administrative naval move
Move any or all naval units from Nouméa/Espiritu Santo (19.3.4).
- As a special case for this type of action, units may move separately and end in different grids. They may not move into grids containing or adjacent to Japanese units of any type (8.1).
19.7.7 Conduct administrative air move
- Move any or all air units at Nouméa/Espiritu Santo (19.4.1).
- As a special case for this type of action, units may move separately and end in different grids. They may not move into a grid containing or adjacent to Japanese units of any type (8.1).