RulesPal
Chat
Rulebook
Shanghai Incident: 28 January – 2 March 1932 thumbnail

Shanghai Incident: 28 January – 2 March 1932

Shanghai Incident: 28 January – 2 March 1932 Rulebook

Table of Contents

Table of Contents

  • 10.0 Introduction
    • 10.2 Game Scale
    • 10.3 Standard Rule Modifications
  • 11.0 Set Up
  • 12.0 Victory
    • 12.1 Game Length
    • 12.2 Epic Chinese Victory
    • 12.3 Victory Point Schedule
    • 12.4 Victory Level
  • 13.0 Pauses
    • 13.1 Declaring a Pause
    • 13.2 Japanese Reinforcements
    • 13.3 Japanese Replacements
    • 13.4 Chinese Reinforcement Availability
    • 13.5 Chinese Logistics
    • 13.6 Chinese Reinforcement Entry
    • 13.7 Chinese Replacements
  • 14.0 Redeployment
  • 15.0 Fire Support
    • 15.1 Availability
    • 15.2 Strength & Range
    • 15.3 Rubble
    • 15.4 Special Air Unit Capabilities
  • 16.0 Special Units
    • 16.1 Support Units
    • 16.2 Japanese Cavalry
    • 16.3 Snipers
    • 16.4 Chinese Trains
    • 16.5 Engineers
  • 17.0 Forts
    • 17.1 Creating & Destroying Forts
    • 17.2 Fort Effects
    • 17.3 The Woosong Forts
  • 18.0 The Settlements
  • 19.0 Game Notes
    • 19.1 Designer's Notes
    • 19.2 Player Notes
  • 20.0 Orders of Battle
    • 21.1 Japanese Forces
    • 20.2 Chinese Forces
  • Standard Rules: Fire & Movement System
    • 1.0 Introduction
    • 2.0 Game Equipment
    • 2.1 The Game Map
    • 2.2 Charts & Tables
    • 2.3 The Playing Pieces
    • 2.4 Game Scale
    • 3.0 Setting Up the Game
    • 4.0 Sequence of Play
    • 4.1 Sequence Outline
    • 5.0 Movement
    • 5.1 Procedure
    • 5.2 Movement Restrictions
  • 8.0 Bombardment & Ground Combat
    • 8.1 Bombardment
    • 8.1.1 Range
    • 8.1.2 Procedure
    • 8.1.3 Results
    • 8.1.4 Terrain Effects
    • 8.1.5 Bombardment Retreat
    • 8.2 Ground Combat
    • 8.2.1 Combat Procedure
    • 8.2.2 Effects of Terrain
    • 8.2.3 Fortifications
    • 8.2.4 Combat Resolution
    • 8.3 Retreat
  • 9.0 Supply
    • Combat Results Table

10.0 Introduction

10.2 Game Scale

Each hex represents 1 kilometer (1,100 yards). Each turn represents one day. Units are mostly regiments of 1,000-3,000 men.

10.3 Standard Rule Modifications

The standard rules are changed as follows.

2.3.1 How to Read Units. In addition to a unit's ID, its higher formation is noted. This is important for replacement (13.0) and stacking (16.1).

2.3.2 Definitions. Units with a circled MA are mobile units, all other are "leg" units. A leg unit stacked with a mobile support unit (see 16.1) are treated as mobile as long as they remain stacked with the support unit.

4.1 Sequence Outline. Mobile Movement Phase. Only mobile units may move during their mobile movement phase. Infiltration (5.1.2) may not be used during mobile movement.

Mobile Combat Phase. All units (both mobile and leg) may attack normally during their mobile combat phase. Treat all Exchange results in this phase as No Effect.

Pause. This is an additional phase that may be declared by the Japanese player at the end of turns 1-6. See 13.0 for details.

5.2 Effects of Terrain (on Movement). See the terrain key on the map for the movement cost of each type of terrain. Movement into Great Rivers is prohibited, but hexes partially covered by a Great River are playable; use the other terrain in the hex.

5.3 Stacking Restrictions. At the end of a phase, a hex may contain one support unit (16.1) plus any one other unit from the same higher formation (see 2.3.1 above). All units in a stack attack, defend, and retreat together, but advance individually.

7.7 Retreat. Attacker retreats are limited to one hex (treat as A1). Friendly units negate enemy zones of control for purposes of retreat. A retreating unit may stop on the friendly unit if within stacking limits; if that hex is attacked in a subsequent combat, the retreated unit does participate. If desired by the owning player or if the retreating units would cause a hex to be overstacked, the retreating unit may retreat additional hexes to reach a safe hex. A unit unable to offer stiff resistance (see 7.8 below) and unable to reach a safe hex after a one or two-hex retreat is eliminated and may not be replaced.

7.7.2 Displacement is not used.

7.8 Stiff Resistance is not automatic. If a player wishes to sacrifice a step to prevent a unit's retreat, roll one die and compare the result to the unit's defense strength. If greater, the unit loses the step and must retreat; if less than or equal to, the unit loses a step and the retreat is not made. If a stack is required to retreat, choose one unit to make the check; if successful, that unit must lose the step.

8.0 Fire Support is modified (see 15.0).

11.0 Set Up

The Japanese player places the following four units, unstacked, in any hexes of the Japanese Sector of Shanghai: 3 Sas, SNLF Armored Car, Ronin, Volunteers. The Japanese player receives one aircraft fire support marker and one naval fire support marker. The Chinese player deploys the eight units of the 78th Division and the two armored trains. Each unit must be placed in a city or town other than the portions of Shanghai containing the Foreign Settlements, the Japanese Sector, or Nanshi. No more than one unit may be placed in a city or town (that's per city/town, not per city/town hex). The trains must be in a city or town hex with a railroad. All remaining units arrive as reinforcements. Place the Turn marker in the "1" box of the turn record track and the Pause marker in the "4" box of the TRT. The Japanese player is the first player.

Hex Control. At the start of the game, the Chinese player controls all hexes except the Japanese Sector and the Foreign Settlements. Thereafter, a hex is controlled by the last player whose units entered the hex.

12.0 Victory

12.1 Game Length

The game may last a maximum of 35 turns, depending on the pauses called by the Japanese player (see 13.0).

12.2 Epic Chinese Victory

The Chinese player wins an epic victory if at the end of the game a Chinese unit is in any Shanghai city hex (including foreign areas and Nanshi). If the Chinese have failed to win an epic victory, determine the winner by counting Japanese Victory Points (VP; see 12.3).

12.3 Victory Point Schedule

The Japanese player receives or loses:

  • +4 VP for each Japanese-controlled city outside Shanghai. To control the city, a Japanese unit must occupy or be the last to pass through each hex of the city (a maximum of 36 VP).
  • +4 VP for control of all three Woosung forts (control determined as above).
  • +4 VP per pause number if the Chinese player commits Fifth Army. For example, if the Chinese player commits Fifth Army during the first pause, the Japanese player receives 16 VP. (see 13.0).
  • +4 VP for each remaining (unused) pause (see 13.0; a maximum of 16VP).
  • -1 VP per pause number for arrival of each of the SNLF and 24th Brigade.
  • -2 VP per pause number for arrival of each Japanese division.
  • -8 VP if a Japanese unit has entered the International Settlement.

12.4 Victory Level

Compare the final Japanese VP with the following:

  • 22 or more VP: Decisive Japanese Victory. Chang Kai-shek's position as Generalissimo is wrecked, returning China to a factionalism that will speed the Japanese conquest.
  • 19 to 21 VP: Major Japanese Victory. The Chinese army has been badly damaged, leading to the evacuation of both Shanghai and Nanking and quieting international opposition to Japan.
  • 16 to 18 VP: Draw (the historical outcome). The Chinese retreat westward, leaving Japan in complete control of Shanghai, but facing an encouraged Chinese army and strained international relations.
  • 13 to 15 VP: Major Chinese Victory. The Japanese still could use Shanghai as a springboard for future operations, but Chinese morale is greatly improved and western aid to the Chinese more forthcoming.
  • 12 or fewer VP: Decisive Chinese Victory. The Japanese attempt to seize the Yangtze delta is a failure, forcing a thorough strategic reevaluation. The US and other western powers increase pressure—diplomatic, economic, and military—on Japan to halt aggression in China.

13.0 Pauses

13.1 Declaring a Pause

The Japanese player may make the decision to pause at the end of the administrative phase of turns 1 through 6; the pause is automatic at the end of Turn 7. During a pause, both players simultaneously call up reinforcements and take replacements (see below). The Japanese player receives all eligible fire support markers (see 15.0). After placing newly arrived units, each player—Japanese first—receives one movement phase. Units may move only if eligible to redeploy (14.0). When the pause ends, return the Turn marker to the "1" box of the TRT and move the pause marker down the track; the game ends when the pause marker hits "0".

Design Note. The campaign was a series of short, intense battles punctuated by long pauses while both sides built up. The tempo of operations was controlled by the Japanese.

13.2 Japanese Reinforcements

All remaining units of the SNLF are available starting the first pause. All other Japanese units become available on the second pause. During each pause, the Japanese player may bring in one available reinforcement unit (the SNLF and 24th Brigade together count as one unit). There is no requirement to bring in reinforcements, and they do cost the Japanese player VP. On arrival, each unit may be placed on any hex containing a great river and not occupied by a Chinese unit or its ZOC. Units may stack normally. All units of a single higher formation must land on contiguous great river hexes. Placement costs the unit its full MA (but it still could move if eligible to redeploy). Once on the map, the unit operates normally.

13.3 Japanese Replacements

During each pause, the Japanese player may replace two steps each in the SNLF and 24th Brigade, four steps in each Japanese division. A reduced two-step unit on the map is flipped back to its full-strength side unless it is in a hex where it could not retreat if required. An eliminated unit may be returned to the map as though an arriving reinforcement, or in or adjacent to a city or town hex occupied by another unit of the same higher formation. It may not be placed in an EZOC. Units eliminated by being unable to retreat may not be replaced. Unused replacements may not be accumulated.

13.4 Chinese Reinforcement Availability

All units of Nineteenth Route Army are available at the start of the game. The Chinese player may commit Fifth Army during any pause (giving the Japanese player the requisite VP). Once available, units enter the map only by expending Chinese logistics.

13.5 Chinese Logistics

At the beginning of each pause, the Chinese player rolls two dice and adds 6 to get the LP award for that pause. If one or both Japanese air units is on the track (see 15.4), roll one die for each; halve the result for each die, rounding down. Reduce the LP award by the combined total. Adjust the Chinese LP marker on its track to record the adjusted total. The Chinese player must expend 1 LP to enter one reinforcement brigade onto the map, 1 LP to place a fort, and 1 LP to replace an eliminated step. LP may be accumulated from turn to turn, but never to a number greater than 19 (any excess is lost).

Player Note. It is highly recommended that the Chinese player retain at least two or three LP at the end of each pause to enable replacement or fort deployment during the following turns.

13.6 Chinese Reinforcement Entry

Chinese reinforcements may be placed on any east or north map edge hex not occupied by a Japanese unit or its ZOC. Placement costs its full MA, but it may move if eligible for redeployment. Once on the map, the unit operates normally.

13.7 Chinese Replacements

Units may receive replacements during each pause and during any Chinese regular movement phase. Each step of replacement requires the expenditure of 1 LP. A reduced two-step unit on the map is flipped back to its full-strength side unless it is in a hex where it could not retreat if required. An eliminated unit may be returned to the map as though an arriving reinforcement, or in or adjacent to a city or town hex occupied by another unit of the same higher formation. It may not be placed in an EZOC. Units eliminated by being unable to retreat may not be replaced. The MA of a unit receiving a replacement step is halved for that movement phase (before it moves by redeploying, if applicable).

14.0 Redeployment

Redeployment is a more rapid form of movement available to a unit not engaged in combat. During its regular movement phase (only), a unit receives quadruple its normal MA. At no time during its move may the unit or its ZOC enter the ZOC of an enemy unit. For this purpose only, treat any enemy-controlled towns and cities as enemy units.

Design Note. Cities and towns were crossroads and thereby protected by both sides, even when the guarding units were too small to be represented in the game. It could not stop a deliberate (deployed) advance, but would be enough to slow marching columns. If necessary, use blank counters or coins to track ownership of towns and cities.

15.0 Fire Support

15.1 Availability

Only the Japanese player has fire support. All the markers have a notation on the flip side indicated the arrival time for the marker; one air and one naval marker begin in the game at start, all the others arriving with a reinforcement.

Once in the game, there is no limitation on the use of each marker; the notation is for arrival purposes only. Each marker may be used once, then is set aside until the next pause.

15.2 Strength & Range

The combat strength of each marker, noted in the lower left of the counter, is used when calculating the combat differential. The number on the lower right indicates the range at which the marker may be used. Aircraft may be used anywhere on the map. The naval markers may reach any hex within five hexes of a great river: count starting with a playable hex containing great river. Cannon may be placed on any hex within two hexes of a Japanese unit with a viable retreat route (it could retreat if forced); do not count the hex containing the unit enabling the use, do count the hex of placement.

15.3 Rubble

Each time a Japanese fire support marker is used in a city hex, roll one die. On a roll of "1" or "2" rubble has been created. Place a Chinese fort unit on the hex, flipped to its reverse side. Henceforth, the hex is treated as a fort hex but may not be removed.

Design Note. The number of fort/rubble markers is not a design limit. Players are free to make additional markers if necessary.

15.4 Special Air Unit Capabilities

The two air markers may be used like any other support marker, or may be used to fly two special missions.

Strategic Interdiction. At the end of a pause, place the air marker on the Chinese LP track. This will potentially reduce the LP award in the following pause (see 13.5).

Battlefield Interdiction. Place the air marker on any hex on the map. It remains there until the following pause. All Chinese units moving within two hexes of the air unit (do not count the air unit's hex) pay double the usual MP cost during regular movement, four times the usual MP cost during redeployment.

16.0 Special Units

16.1 Support Units

A unit with a colored band across the counter is a support unit. It operates in all ways like other units except it may stack with another unit belonging to the same formation. Note that in some cases the support units are keyed to an entire higher formation (a division), or may be limited to a single brigade or even regiment. Stacked units must attack and defend together. The support unit always must be the first step lost from the stack.

It may be replaced normally. A mobile support unit imparts mobile status to the unit stacked with it.

16.2 Japanese Cavalry

Retreating Chinese units may ignore the ZOC of Japanese cavalry.

16.3 Snipers

Each time a Chinese attack is launched into a Shanghai city hex, the Chinese player may place a sniper unit on any Shanghai city hex within two hexes of the hex being attacked. The sniper triples the MP cost for a Japanese unit moving through its hex or any adjacent hex. If attacked, the sniper is eliminated on any exchange or D result; the attacking Japanese unit ignores all combat results.

16.4 Chinese Trains

The Chinese train units are armored trains. They may move only along the railroads and may move any distance each turn. They may enter and exit EZOC, but may not do both during the same move. They do not count toward stacking; up to two Chinese units may stack in the same hex. They attack and defend like other units. They may advance and retreat only along the rail lines. When retreating they ignore EZOC. If forced to retreat and unable to do so, they are eliminated. They may not be replaced.

16.5 Engineers

Any Japanese attack involving an engineer unit ignores forts; use the underlying terrain instead. The engineer must be the first step lost in any exchange. They may be replaced.

17.0 Forts

17.1 Creating & Destroying Forts

The Chinese player (only) may create a fort in any Chinese-occupied city or town hex during a pause or a regular movement phase. Expend 1 LP to place the marker. During a pause, the fort may be placed in any Chinese-occupied city or town hex; ignore EZOC. During movement, the chosen hex must be occupied by a Chinese unit that has not moved. The fort remains in the hex until the building unit moves or is eliminated; when either event occurs, remove the fort.

17.2 Fort Effects

In addition to its combat terrain effect, a unit defending a fort may choose to offer stiff resistance without a die roll.

17.3 The Woosong Forts

The three forts printed on the map are like other forts with two exceptions.

  1. The forts contain garrisons and do not need Chinese combat units to operate. The combat strength of each fort is equal to the number of forts still in Chinese control at the instant the differential is calculated. The forts are destroyed by any Ex or D result, and the attacking Japanese units may advance into the hex (even after an exchange). Chinese units in the hex do gain the benefit of the forts.

  2. The forts are destroyed permanently only if all three are occupied by Japanese units simultaneously. Until that happens, a fort is operative unless occupied by a Japanese unit. If an occupying Japanese unit leaves, the fort returns to operative status.

18.0 The Settlements

The Chinese had agreed by treaty to stay out of the French Concession and the International (read: US) Settlement. The Japanese were bound by no treaty, but for practical reasons left the sectors in peace. However, the Japanese player may, if he chooses, move into and through the foreign sectors. There is no penalty for doing so except the loss of VP. Once a Japanese unit has entered the sector, the Chinese are free to do so as well. If no Japanese enters the settlements, no Chinese unit may enter them or Nanshi.

19.0 Game Notes

19.1 Designer's Notes

The only significant problem about this design was the start-and-stop nature of the campaign. I flirted first with the idea of weekly or half-weekly turns, but the scale of the campaign obviated against such a treatment—too many things happened in the course of a day to telescope operations so much. The solution is the pause rule, which puts the Japanese player on the horns of a repeating dilemma. The pause allows recovery of Japanese fighting strength, but the tradeoff is a respite for the Chinese as well, plus the loss of VP. I gave both players as many options as possible for structuring their forces over time; both sides were playing a much bigger, much longer game than just the fight for one city, even the world's fifth largest.

19.2 Player Notes

The armies in this game are powerful but fragile, and each in different ways. Neither is capable of sustained offensive action, so you must choose your targets carefully.

Japanese Player. The burden of attack is on you but you cannot afford to go all out along the front. That said, you must stretch the Chinese lines early by attacking in several sectors. Make haste slowly: concentrate support units and fire support to maximize Chinese casualties and minimize your own. Plan your attacks so each helps set up the next one. Choosing pauses is the main strategic decision you have to make. There is virtually no way to avoid the first, so don't try to win the game too quickly. Use the first week of fighting to set up a solid base from which you can make a strong punch in the second. Each succeeding week should put you in a better position to try for something decisive.

You will be tempted at times to scoot through the International Settlement, particularly if the Chinese player ignores the possibility entirely. Don't do it unless you know you can win the game as a result.

Chinese Player. You must play a careful game at first because you just don't have enough units to cover the line thoroughly. Pick some points of concentration; Shanghai itself, of course, and the one town nearest the main Japanese thrust north of the city. During the first pause, use as many LP as feels safe to bring in replacements and reinforcements. Your real need at this point is units rather than combat strength, just so you can put something in front of any Japanese advance. Better to take two replacements at reduced strength than one at full strength.

If the game lasts into the second pause, you can start thinking seriously about creating a reserve of full strength units to form a counterattack threat. It won't last long, so maneuver it judiciously to keep the Japanese player guessing. When you do commit it, go whole hog and do some damage.

20.0 Orders of Battle

21.1 Japanese Forces

9th Division: 6th Brigade (7th & 35th Infantry), 18th Brigade (19th & 36th Infantry), one regiment each of light artillery, cavalry, and engineers, plus one company of 15 tanks.

11th Division: 10th Brigade (12th & 22nd Infantry), 22nd Brigade (43rd & 44th Infantry), one regiment each of light artillery, cavalry, and engineers.

12th Division (part): 24th (Mixed) Brigade with one battalion each of the 14th, 24th, 46th, & 48th Infantry, a battalion of light artillery and a company of engineers.

14th Division: 10th Brigade (12th & 22nd Infantry), 22nd Brigade (43rd & 44th Infantry), one regiment each of light artillery, cavalry, and engineers.

Special Naval Landing Force: 1st, 2nd, & 3rd Sasebo Battalions, 1st & 2nd Yokosuka Battalions, and 1st Kure Battalion, plus a detachment of armored cars and light tanks.

Volunteers: As many as 3,000 men, mostly reservists, delegated largely to suppression of Chinese snipers.

Battalions were around 800 strong, regiments close to 3,000, divisions about 15,000. Generally well-trained and -equipped, the infantry still had a predilection for frontal assaults—they were not yet the nimble assault troops of WWII. Organic fire support was weak, but they had strong naval and aerial support.

20.2 Chinese Forces

5th Army: 87th and 88th Infantry Divisions (about 20,000 men).

19th Route Army: 60th, 61st, and 78th Infantry Divisions (at least 15,000 to as many 23,000 men).

The divisions of 19th Army (the "Route" appellation referred to its arms-length relationship with Chiang Kai-shek's central command) each had two brigades of three regiments for a total of 18 battalions. Worn down by previous campaigns, actual strength probably hovered between 5,000 and 8,000 men. The two divisions of 5th Army were German-trained and amounted to Chiang's Guards. Newly raised, they were close to full (12-battalion) strength. All Chinese units had minimal fire support and service elements.

Standard Rules: Fire & Movement System

The following is the Fire & Movement System Rules, Version 8 (© Decision Games 2023), which the exclusive rules above modify. Credits and copyright boilerplate are omitted; the counter, terrain and example diagrams are omitted and their captions are kept.

1.0 Introduction

Each game represents an actual or hypothetical battle, as included in the Exclusive Rules. The map included with the game represents each different battle's terrain. The pieces represent the actual (or hypothetical) units that participated or might have participated in the battle. The System Rules are rules that fit all games using the F&M system, and the exclusive rules are specific to each represented battle.

2.0 Game Equipment

See exclusive (scenario) rules.

2.1 The Game Map

The map sheet portrays the battle area. Printed over the terrain features is a hexagonal grid to regulate the movement and positioning of the game pieces throughout the game.

2.2 Charts & Tables

Various visual aids provide the players to collate, simplify and illustrate certain game functions. They are the Combat Results Table (CRT), the Terrain Key, and the Game Turn Record Track (GTRT). Exclusive rules may contain additional charts.

2.3 The Playing Pieces

The cardboard playing pieces (counters) represent the actual military units that took part in the battle. The different colored units (combat units) represent forces of opposing sides. The numbers and symbols on the counters represent the attack and defense strength, movement capability, and type of unit represented by each counter.

Important: In the system rule diagrams and examples, the exact units may not appear in the current game; however, all designations and terms used are consistent with the units in the current game unless the exclusive rules dictate otherwise. See exclusive rules for unit type symbols.

Counter diagram labels (leg combat unit, front): Unit Type Symbol, Unit Size Symbol, Unit ID, Attack Strength, Parent Formation, Defense Strength, Movement Allowance. Diagram labels for the leg combat unit (back) and the mobile combat unit (front) include "Mobile Unit Designator." The diagram legend reads:

  • Black box = Leg Unit
  • Red box = Mobile Unit

Note: The front side of a combat unit is the full-strength side and the back of the unit is normally its reduced side. For most games in the series, the reduced side shows the unit type symbol having the same background color as the counter. Not all combat units have a reduced side and thus are one-step units.

Support Fire Marker (front/back): Type Symbol, Support Strength.

Important: The exclusive rules will list the specific types of units available in each game.

2.3.1 How to Read Units

Most units contain identifiers (or names) and sizes. The identifier or name of a unit has no bearing on play, except as part of set-up and reinforcement rules. An identifier that lists two numbers separated by a slash represents the battalion number and then the regiment number from which that battalion derives (though that parent regiment may or may not be in the game).

Example: A unit printed with 4/47 is referring to the 4th Battalion of the 47th Regiment. A single number identifier typically refers to a single formation of its type (9 could refer to the 9th Division).

Unit Sizes:

  • •••: Platoon
  • I: Company
  • II: Battalion
  • III: Regiment
  • X: Brigade
  • XX: Division
  • XXX: Corps

Note: Games may include additional unit sizes. See exclusive rules.

2.3.2 Definition of Terms

Attack Strength: The relative strength of a unit when attacking other units, expressed in terms of attack strength points.

Bombardment Attack: An attack conducted by the active player using support fire markers only. Bombardment attacks take place during each player's Bombardment Phase (8.1).

Defense Strength: The relative strength of a unit when defending against the attacks of enemy units, expressed in terms of defense strength points. See attack strength.

Combat Modifier (Support Strength): The strength of support fire markers. They represent everything from corps artillery, naval support, aerial bombardment and organic mortars used to attack enemy units. The combat modifier (expressed in terms of a "+") value that players may add to the strength of a friendly unit during combat or as an attack strength when conducting bombardment.

Movement Allowance (MA): The number of movement points (MP) a unit may expend in a single Movement Phase. Each hex a unit moves into and/or each hexside crossed forces the unit to expend a given number of MP.

Leg Unit: A unit that is not a mobile unit. It represents any type of unit that lacks inherent conveyance or transport.

Mobile Unit: A unit that is not a leg unit. It represents any type of unit that moves by a means other than by foot. A mobile unit can be anything from tanks to wagons. Only mobile units may move during the Mobile Movement Phase and/or conduct attacks during the Mobile Combat Phase (4.1).

Support Fire Markers: Represent naval gunfire from ships offshore, bombers/fighters providing ground support or interdiction support, or artillery units of all types and sizes not represented as units in the game.

2.4 Game Scale

The exclusive rules will indicate the scale of the map and the time that each game turn (GT) represents.

3.0 Setting Up the Game

Players should determine the side each will play. Players then consult their respective setup instructions in the exclusive rules. The instructions will list the strength and position of each unit in play on the map during the first GT.

The exclusive rules:

a) Will indicate the player who is the first (starting) player and the player who will set up first.

b) May assign units specific set-up hexes, general areas near a specific location/hex number, or instruct the players to choose the set-up hexes for their units.

c) Will specify the number and GT of arrival for any reinforcements scheduled for that battle. Players should place reinforcements to the side of the map or place them on the GT RT in the GT box for the GT they will arrive.

  • Consult the exclusive rules to determine the placement of support fire markers. The support fire number may be on the GTRT. The number signifies the number of support fire markers (not points) available each GT.

Important: There has been a major update to the bombardment rules. Players may use these bombardment rules in previous games in the series, however, they have not been subject to play test with all games.

  • The GTRT may contain other information pertinent to game play. See the exclusive rules for details.

4.0 Sequence of Play

Players conduct each game in successive GTs, each turn is composed of alternate player turns. During the GT players maneuver their units and resolve combat according to the sequence outline and within the limitations provided by the rules.

4.1 Sequence Outline

Each GT consists of a First Player Turn followed by a Second Player Turn. One player takes the First Player Turn while the other player plays the Second Player Turn. The GTRT on the map and/or exclusive rules will indicate which player is the first player. Complete each player turn in the order given below. Complete each phase before beginning the following phase.

Support Fire Marker Phase: Both players organize their support fire markers as outlined in 7.0 or as dictated by the exclusive rules.

First Player Turn

Movement Phase: The current (active) player may move any number of his eligible units, as he desires within the limits and restrictions of the rules of movement (5.0), zones of control (ZOC) (6.0) and the exclusive rules. The active player may bring reinforcements onto the map as allowed by his reinforcement schedule and the reinforcement rules.

Important: Mobile units that move during this phase cannot move during the upcoming Mobile Movement Phase.

Bombardment Phase: The active player may conduct bombardment attacks against enemy units (8.1).

Combat Phase: The active player may use his units to attack enemy units (8.2).

Important: Mobile units that participate in combat during this phase cannot conduct combat during the Mobile Combat Phase.

Mobile Movement Phase: Only mobile units can move during this phase. Mobile units that moved during the preceding Movement Phase cannot move this phase. Movement in this phase is otherwise identical to the Movement Phase.

Mobile Combat Phase: Only mobile units can attack this phase. Mobile units that participated in an attack during the preceding Combat Phase cannot conduct attacks this phase. Combat in this phase is otherwise identical to the Combat Phase.

Second Player Turn

After the first player has completed his turn, the second player then conducts his turn using the same procedures and order given for the first player.

Game Turn End Phase

After the second player completes his player turn, the GT ends. If it is the last turn of the game, players determine victory. If there are turns remaining, advance the turn marker one space along the GTRT and conduct that turn using the above procedures.

5.0 Movement

5.1 Procedure

During the Movement Phase, the active player may move any number of his eligible units as he desires.

  • Units may move in any direction or combination of directions, up to the limits of each unit's printed MA.
  • Always move units one at a time, tracing a path of contiguous hexes through the hex grid.
  • As each unit enters a hex, it pays one or more MP from its movement allowance.

5.2 Movement Restrictions

Movement cannot take place out of sequence. Neither player can conduct movement during the opposing player's Movement or Mobile Movement Phase. A player can only move units during his own Movement or Mobile Movement Phase.

  • A unit:
    • a) Cannot expend more MPs than its total printed MA during any one turn.
    • b) Cannot accumulate unused MPs from phase to phase or from turn to turn, nor can players transfer MP from one unit to another unit.
    • c) Cannot enter a hex if the unit does not possess enough remaining MPs to pay for the cost to enter, as well as the cost of any hexside terrain the unit crossed.
    • d) Cannot enter a hex containing an enemy unit.
    • e) Cannot enter a prohibited terrain hex or cross a prohibited hexside.
    • f) Cannot exit the map unless specifically allowed by the exclusive rules.
  • Units may have their movement affected by enemy zones of control (EZOC) (6.0).
  • Players may not move a unit that has completed its movement during that same turn except as a retreat or an advance after combat.

Important: There is no minimum number of hexes a unit may move; a unit may not have enough MA to move to any adjacent hex, in which case it may not move at all.

Important: Advance and retreat may take place during a Bombardment Phase, Combat Phase or Mobile Combat Phase. Advance after combat and retreat after combat are not movement and do not require the expenditure of MP.

5.3 Stacking Restrictions

Units cannot stack.

  • Only one unit can occupy a hex at the end of any phase.
  • A unit may move through hexes occupied by other friendly units at no extra MP cost.
  • A unit cannot end its movement stacked with any other unit.

5.4 Effects of Terrain

A unit must expend one MP to enter a clear terrain hex.

Important: Hexes may depict more than one type of terrain. In this case, use the MP expenditure of the terrain with the highest cost in MP.

  • To enter other types of hexes, a unit must expend more than one MP.
  • The Terrain Key or TEC (normally printed on the map) list each type of hex and hexside terrain with the corresponding MP cost for each type of terrain.

Important: The following examples may not reflect the actual terrain types or movement costs for a particular game. Consult each game's terrain effects for specific MP costs.

Example: A jungle terrain hex costs 3 MPs to enter.

  • Hexsides may display other types of hexside terrain features (such as a river) that require additional movement points to cross. This cost is in addition to the cost of the terrain in the hex.

Example: A unit crosses a river (+1 MP) and enters a clear terrain hex (1 MP). The cost to enter that hex would be 2 MP.

Example: The previous diagram shows the hexes (shaded) that are in the zone of control of the unit depicted.

  • In hex terrain may have a "+" and a number. If that is the case, add that number to the cost of other terrain in the hex.
  • All units not marked with a black hexagon in either the upper right or the left side of the counter exert a zone of control. ZOC are always in effect, regardless of the phase or the player turn.

Example: A unit enters a clear hex (1 MP) that contains a village (+1 MP) and that unit crossed a river hexside (+1 MP). The cost to enter the hex is 3 MP.

5.4.1 Road Movement

A unit that moves from one road hex directly into an adjacent road hex through a road hexside normally expends one-half (½) of a MP, regardless of other terrain in the hex or hexside terrain. See exclusive rules for exceptions.

5.4.2 Trail Movement

A unit that moves from one trail hex directly into an adjacent trail hex through a trail hexside expends only one MP, regardless of other terrain in the hex or hexside terrain.

5.5 Mobile Movement Phase

During the Mobile Movement Phase, the active player may move any number of his eligible units as he desires, subject to the following restrictions:

  • Mobile units that moved in the Movement Phase of a player turn cannot move during the Mobile Movement Phase of the same player turn.
  • Leg units cannot move during the Mobile Movement Phase.
  • Units moving during the Mobile Movement Phase follow the same procedures as used during the Movement Phase (5.1 through 5.4).

6.0 Zones of Control

The six hexagons surrounding each hex constitute the zone of control (ZOC) of any unit in that hex.

(Diagram caption: "Unit does not exert a ZOC.")

  • Zones of control extend into all types of terrain and across all types of terrain hexsides.

Exception: Games may have fortifications or other restrictions that will negate the projection of ZOC into specific hexes.

  • Enemy and/or friendly units never affect the presence of ZOC.
  • If an enemy and friendly ZOC extend into a hex, they have no effect upon each other, i.e., both co-exist. The ZOCs mutually affect the hex.
  • If a unit is in an enemy zone of control (EZOC), the enemy unit is also in that unit's ZOC.

6.1 Effects on Movement

ZOCs inhibit the movement of enemy units.

  • A leg unit that begins its movement in a hex not in an EZOC that then enters a hex in an EZOC must immediately stop its movement, regardless of the number of MP it has remaining.
  • A leg unit that begins its movement in an EZOC can move directly into another hex in an EZOC by expending all its printed MA as long as the terrain is not prohibited and the unit has sufficient MA to expend for the hexside/in-hex terrain.
  • Any unit that begins its movement in an EZOC can move into a hex not in an EZOC. The unit would expend the normal MP costs for that hex. It may continue movement normally.
  • A leg unit must halt its movement if it later enters another EZOC.

Example 1 (next page): The 51st Infantry Regiment can move into the hexes connected by black arrows. It can move from its starting hex directly into hex 2311 or 2413.

  • A mobile unit must expend half (round down) of its printed MA (plus the normal cost of terrain) when it moves into an EZOC (i.e., a unit with MA of "7" would expend three movement points to enter an EZOC).

Example 2 (next page): The 1st Cav can move into the hexes connected by black arrows.

Exception: A unit may not move from EZOC to EZOC across a minefield hexside or to enter a fortification hex; however, this restriction does not apply to commandos. Commandos never pay additional movement costs to enter or exit an EZOC.

6.2 Effects on Retreat & Advance After Combat

Units retreating after combat cannot retreat into hexes in an EZOC (8.3). Units advancing after combat ignore EZOCs (8.5).

7.0 Support Fire Markers

Support fire markers represent indirect fire assets not represented in the game by actual counters. Support fire markers do not exist on the map as units; they represent the incoming fire from supporting assets.

7.1 Allocation of Support Fire Markers

Important: The exclusive rules may modify the availability and allocation of support fire markers. Players should check the exclusive rules before proceeding further.

Each side has its own pool of support fire markers, allotted by the support fire allotment number printed on each turn box of the GTRT.

  • The support fire number equals the total number of support fire markers the players will receive at the beginning of that GT.
  • If the allotment of support fire markers indicated on the GTRT is less than the total quantity of markers in the pool for that player's side, that player must select from the lowest-valued markers before selecting higher-valued markers. Players must select support fire markers in order from lowest to highest.
  • If a box has two numbers, the first number is the support fire marker allotment for the first player, the second number is the support fire marker allotment for the second player.

Example: "8/9" printed in the first GT box indicates the first player has 8 support fire markers, and the second player 9 support fire markers.

7.2 Support Fire Application

All support fire markers function the same, though markers may have different printed "+" values (the combat modifier) and different icons.

Exception: Bombardment range (8.1.1).

  • See the scenario instructions for allocation of support fire markers.
  • Support fire markers used during the Bombardment Phase or any Combat Phase are not available again during the same GT.
  • Once used, return support fire markers to the player's pool. They are not available for the remainder of the current GT but may be available in subsequent GTs.
  • Players may not accumulate support fire markers from GT to GT. If not used during the GT allotted, players must return them to their respective pools.
  • Players randomly pick support fire markers from the pool (unless scenario rules instruct otherwise) when allocated to bombardment and/or combat. Players must place them face down, meaning the "+" value is not showing.
  • Players can only use a support fire marker once during each GT.
  • The value represents the combat strength that players may apply to bombardments or combats that occur during the turn. Whether as the attacker or the defender, the applying player places his support fire marker(s) and then adds the support fire markers "+" number to his total attack or defense value.
  • A player may not divide or split the "+" value of a support fire marker among different targets. A player may only apply each support fire marker to one target hex only.
  • Combat results (bombardment and ground combat) have no effect on the allotment of support fire markers during the current or any future GT, except when stipulated differently by the exclusive rules.

Example: If two 4-4-10 units are attacking a 2-3-8 unit; the total attack value is "8". If the attacking player has added two "+2" support fire markers, the final attack value becomes "12". If the defending player has added one "+6" support fire marker to that same combat, the final defensive value would then become "9".

8.0 Bombardment & Ground Combat

There are two types of combat: bombardment which takes place during the Bombardment Phase, and ground combat which takes place in the Combat or Mobile Combat Phases. The rules below apply to both bombardment and ground combat.

  • The active player is the attacker and the inactive player is the defender, regardless of the strategic or tactical situation.
  • Combat is not mandatory. There is no requirement for unit to attack, although a defending unit cannot avoid combat.
  • A single defending unit can be the subject of an attack in each of the Bombardment, Combat and the Mobile Combat Phases; however, it can only suffer one attack in each of the above phases.
  • A single attack may only attack one defending hex (i.e., attackers may not attack more than one hex during a single attack).
  • There is no requirement for an attacker to declare all his intended attacks at the outset of the Bombardment or Combat Phase. He can declare each eligible attack as he reviews the map and conducts each individual attack.
  • Players must resolve each attack prior to conducting any other attacks.
  • The attacker can resolve attacks in any order the attacker wishes, provided he resolves each combat before declaring the next combat.

8.1 Bombardment

During the Bombardment Phase, the active player may conduct attacks using support fire markers only.

  • Bombardment attacks do not require a friendly unit to be adjacent to the enemy units attacked.
  • Friendly ground units do not participate in a bombardment in any way, including advance after combat. Bombardment does not affect friendly units except as outlined in 8.1.3.
  • Each support fire marker may only target one enemy occupied hex.
  • A maximum of two markers may bombard the same hex during the same player turn.
  • Markers may be of any value from among the markers drawn from the player's pool.
  • Once a player uses a marker, follow the procedures outlined in the exclusive rules to determine the marker's eligibility for reuse in a later game turn.

8.1.1 Range

A player may use support fire markers to bombard targets anywhere on the map. The exclusive rules may assign specific ranges for certain types of support fire markers.

8.1.2 Procedure

To conduct a bombardment, the active player may select any enemy unit that is in range of the support fire markers used (8.1.1). Follow the procedures below, in the given order, for each bombardment.

  1. The attacker identifies the enemy unit he will bombard.

  2. He may select a maximum of two support fire markers, stating the number he has selected and their total strength.

  3. Calculate the combat differential by totaling the support strength value minus the total defending unit's strength value. Locate the line on the CRT that matches the terrain in the defender's hex (8.2.2).

Exception: Do not apply hexside terrain (8.2.2).

  1. Next, on that line locate the column on the CRT that corresponds to the final combat differential. Roll one six-sided die and cross-reference the result within the combat differential column on the CRT. Apply the results immediately.

8.1.3 Results

Apply the results the same as ground combat with the following exceptions:

  • Ae, A1, A2, A3 & Ex: Treat as no result.
  • (A): Apply this result only if there is at least one unit friendly to the bombarding player adjacent to the hex bombarded (friendly fire).

8.1.4 Terrain Effects

Players may use bombardment regardless of intervening terrain or units (enemy or friendly). It is not subject to line of sight restrictions, except when stipulated differently by the exclusive rules. In all cases, the defending units benefit fully from the terrain in the hex they occupy (not hexside terrain) per the CRT.

8.1.5 Bombardment Retreat

Conduct retreat after bombardment using the procedures outlined in 8.3.

  • The retreating unit must, if possible, retreat farther away from the closest enemy unit.
  • If there are no enemy units on the map, the unit must retreat towards the closest friendly unit.

8.2 Ground Combat

Ground combat can only take place when friendly units are adjacent to enemy units.

  • The active player may declare any number of attacks by eligible units as he wishes.
  • The attacking player may decide which of his units will be participating in an attack against which defending units.
  • A mobile unit cannot attack in both the Combat Phase and again in the Mobile Combat Phase of the same player turn.
  • There is no requirement for all adjacent units to attack.
  • Units that do not participate in one attack may participate in a later attack against another hex if the unit meets all other requirements.
  • A player may attack a unit from all adjacent friendly occupied hexes.
  • A unit cannot attack across a prohibited/restricted hexside or into a hex prohibited to the attacking unit.
  • The type of terrain the attacking unit(s) occupy has no effect on their eligibility to attack.
  • All attack and defense strengths are unitary. A player cannot divide a unit's strength among different combats, whether as the attacker or the defender. A unit may not combine its attack and defense strengths for any reason.

8.2.1 Combat Procedure

Follow the procedures below, in the given order, for each attack.

a) The attacker states the quantity and the strength of his attacking units, and the enemy unit that is the subject of the attack. Once declared, the attacking player cannot call of an attack.

b) Both players may select available support fire markers in support of the current combat. This is a five-step process:

  1. The attacking player may select one support fire marker placing it value-side down near the battling units to indicate it will support that combat.

  2. The defending player may then select one support fire marker placing it value-side down near the battling units to indicate it will support that combat. The defender may do this whether the attacker did or did not place a support fire marker.

  3. The attacker may then select a second (one additional) support fire marker. He may do this whether either player did or did not already apply a support fire marker.

  4. Finally, the defender may select a second (one additional) support fire marker. He may do this whether either player did or did not already apply any support fire markers.

  5. Both players reveal their support fire marker values (flip the markers over).

Important: After each step, neither player can change his mind about having placed, or not placed, a support fire marker in a previous step.

c) Each player adds the combat strengths of his ground units and support fire markers into one total.

d) Calculate the combat differential by subtracting the defender's total from the attacker's total. Locate the line on the CRT that matches the terrain in the defender's hex, including hexside terrain. Then on that line locate the column on the CRT that corresponds to the final combat differential. Roll one six-sided die and cross-reference the result within the combat differential column on the CRT. Apply the results immediately.

8.2.2 Effects of Terrain

Only defending units benefit from the terrain in the hex they occupy and/or that hex's hexside terrain feature. The terrain within the hexes occupied by attacking units has no effect upon combat.

  • Defending units do not benefit from river or ditch hexsides unless all the attacking units are attacking that defending unit across a non-bridged river or ditch hexside into that hex. If all units are attacking across a river and at least one of the units is attacking across a bridged hexside, use the bridged line on the CRT.
  • The effect of terrain on combat is an integral part of the CRT. Refer to the terrain in the defending unit's hex and/or hexside and cross-reference that terrain type with the combat differential (8.2.1).

Important: Hexes may depict more than one type of terrain and may have hexsides that impact combat. In this case, use the terrain most beneficial to the defender.

Important: River hexsides contain a bridge wherever a road crosses a river. If at least one attacking unit is attacking across a bridged river hexside, that attack is an attack across a bridge (not across a river) when resolving an attack on the Combat Results Table (CRT).

8.2.3 Fortifications

If a game includes fortifications (whether printed, or as counters), the following applies to any unit occupying a hex containing a fortification:

  • Double the printed defense strength of a unit.
  • Halve (round down) the combat modifier (the "+" value) of an attacker's support fire marker when applied to a fortification hex.
  • This rule does not apply to support fire markers applied by the defending player.

8.2.4 Combat Resolution

The combat results listed on the CRT are as follows:

  • De**: Eliminate the defending unit(s).
  • D3*: The defending unit(s) must retreat three hexes.
  • D2*: The defending unit(s) must retreat two hexes.
  • Ex: Flip one attacking unit and the defending unit to their depleted side (or eliminate if already depleted or a one-step unit). Among multiple attacking units, the attacker chooses the unit to deplete.
  • A1*: The attacking unit(s) must retreat one hex.
  • A2*: The attacking unit(s) must retreat two hexes.
  • A3*: The attacking unit(s) must retreat three hexes.
  • (A): Deplete one adjacent unit (or eliminate it if already depleted or a one-step unit). If conducting bombardment, this result applies if friendly unit is adjacent to enemy unit being bombarded.
  • Ae**: Eliminate all attacking units.
  • • : No Effect.

* Note: The retreating player may choose to ignore his retreat requirement by declaring stiff resistance and depleting his unit instead (8.4).

** Note: On a De, or Ae result, eliminate all units. Do not deplete two-step units, eliminate them.

Important: If the combat result is a retreat, the retreating player retreats his own units in accordance with the retreat rules (8.3).

8.3 Retreat

When a combat result requires a unit to retreat, the owning player must immediately attempt to move that unit the indicated number of hexes away from its current hex. A retreat is not movement and does not require the expenditure of movement points.

Important: If a rule states that a unit is to deplete, eliminate the unit will if already depleted or is a one-step unit.

  • If a unit cannot retreat at least one hex (for any reason), eliminate the retreating unit (this does not nullify the retreat).
  • A unit should (if possible) end its retreat closer (in hexes) to a friendly map edge (or a friendly source of supply).
  • If possible, a retreating unit must retreat along a path of vacant hexes (not occupied by other friendly units). A unit may retreat through friendly occupied hexes if no other retreat route of vacant hexes is possible. See 8.3.1 for effects.
  • Under no circumstances may a unit retreat into or through a hex occupied by an enemy unit or a hex in an EZOC.

Important: Friendly units and friendly units with a ZOC into a hex do not negate any EZOC into that same hex for the purposes of retreat.

  • A unit may not retreat into or through prohibited terrain (an all-sea hex).
  • Seaborne units required to retreat to a sea hex must deplete (scenario rules will identify units that may be seaborne and may supersede this rule).
  • A unit that must retreat must stop its retreat the number of hexes away required by the combat result retreat number (from its original combat hex). If the unit can retreat at least one hex but cannot retreat the required number of hexes for any reason, deplete the unit in the last hex to which it can legally retreat. If depleted, then eliminate the unit.
  • Unless specifically stated in exclusive scenario rules, units may not retreat off the map.

8.3.1 Displacement

If a retreating unit's only available final hex in a retreat path is occupied by another friendly unit, the retreating player may choose to displace (move) that other friendly unit from its hex to one adjacent hex as if that other friendly unit was also retreating because of combat.

  • Displacement is voluntary; a retreating unit unable to retreat because of the presence of other friendly units may deplete instead of displacing a friendly unit.
  • A retreating unit may not displace a friendly unit if any eligible vacant hex is available.
  • Displacements cannot be into a prohibited hex, into an EZOC, or into a hex in which the displaced unit would stack with another unit.
  • After the displaced unit has moved, the retreating unit may retreat into the displaced unit's formerly occupied hex.
  • A displaced unit can displace another friendly unit using the same procedure.
  • The displacement of units may continue until all units are in a hex that does not contain a friendly unit.
  • A given unit may displace more than once in a phase.
  • An attacker's displaced unit is ineligible to conduct an attack during the remainder of the attacker's turn.
  • A retreating unit does not displace a friendly unit when moving through that other unit's hex during a retreat, but only if ending a retreat in the other unit's hex.

8.4 Stiff Resistance

Instead of obeying a retreat combat result, a player may declare stiff resistance. The player makes this decision after the combat die roll. A player may use stiff resistance when defending against bombardment and ground combat.

  • When declaring stiff resistance, there is no requirement to retreat.
  • The unit conducting stiff resistance is immediately depleted. If the attacker declares stiff resistance, any unit that does not retreat must suffer depletion.
  • A player may opt to declare a depleted or one-step unit to offer stiff resistance to avoid the retreat combat result. The player must eliminate the depleted or one-step unit and still fulfill the requirements of the stiff resistance. This prevents any advance after combat into that combat hex (8.5).

8.5 Advance After Combat

A player can only advance after combat following a retreat combat result on an attacked (defending) enemy unit (i.e., D2 or D3). Advance after combat does not take place after an Ex or De result.

  • A defending unit may never advance after combat.
  • There is no advance after combat when conducting a bombardment.
  • When an enemy unit retreats due to combat, it will leave a path of vacant hexes behind it, called the path of retreat. If a unit was unable to retreat the required number of hexes, the retreat path is the last hex into which the retreating unit could legally retreat. This includes units when unable to complete the entire retreat (8.3).
  • Any or all units that participated in the combat that caused the retreat are then eligible to advance along the path of retreat.
  • The decision to advance after combat must come immediately after the retreat is complete.
  • Advance after combat is voluntary and the owning player always determines which units and how far they advance.
  • Advancing units ignore all EZOC along the entire path of retreat.
  • Unit(s) advancing after combat may end their movement in any of the hex(s) along the path of retreat, but they may not stray from the path of retreat while moving.
  • If multiple units advance after combat, no more than one unit may end its movement in any one hex of the path of retreat.
  • After an advance after combat, an advancing unit is not eligible to attack or perform any other activity during that player turn (unless specified otherwise by an exclusive rule).
  • An advanced unit is subject to attack by any eligible enemy units in the immediately following enemy Combat Phase, just like any other unit.

9.0 Supply

There are no supply rules (unless otherwise noted in a specific game's exclusive rules). All units are always in supply. Isolated or surrounded units suffer no penalties.

Combat Results Table

Format note: the printed CRT is one grid with a shared set of die-roll result columns and a differential range per defender terrain. It is split below into one table per defender terrain, listing each combat differential against the result for each die roll (1–6). Combat differential is attack strength minus defense strength.

Notes printed with the table:

  • Attacks at less than the lowest differential are resolved at the lowest differential.
  • Attacks at greater than +10 are resolved as +10 attacks.
  • When conducting bombardment treat the results in Bold as No Effect. (The bold typography is not reproduced here.)
  • De**: The defending unit is eliminated.
  • D3*: The defending unit must retreat three hexes.
  • D2*: The defending unit must retreat two hexes.
  • Ex: One attacking unit and one defending unit must be flipped to their reduced side. If already reduced or is a one-step unit the unit is eliminated. Among multiple attacking units, the attacker chooses the unit to deplete/eliminate.
  • A1*: All attacking units must retreat one hex.
  • A2*: All attacking units must retreat two hexes.
  • A3*: All attacking units must retreat three hexes.
  • (A): One attacking unit must be reduced. If unit is already reduced or a one-step unit it is eliminated. Among multiple attacking units, the attacker chooses the unit to reduce/eliminate. If conducting bombardment, this result only applies if a friendly unit is adjacent to the enemy unit being bombarded.
  • Ae**: All attacking units eliminated.
  • • : No Effect.
  • * Stiff Resistance: The affected player may choose to ignore his retreat requirement by choosing to reduce one unit instead.
  • ** Note: On a De or Ae result, all units are eliminated. Two step units are not reduced, they are eliminated.

Mountain

Differential123456
0A3(A)(A)(A)(A)Ae
+1A2A3(A)(A)(A)(A)
+2,+3•A2A3(A)(A)(A)
+4,+5Ex•A2

City, Rough, River

Differential123456
−2(A)(A)(A)(A)AeAe
−1A3(A)(A)(A)(A)Ae
0A2A3(A)(A)(A)(A)
+1•A2A3

Marsh/swamp, Town, Broken

Differential123456
−3(A)(A)(A)(A)AeAe
−2A3(A)(A)(A)(A)Ae
−1A2A3(A)(A)(A)(A)
0•A2A3

Woods, Bridge, Canal, Ditch

Differential123456
−4(A)(A)(A)(A)AeAe
−3A3(A)(A)(A)(A)Ae
−2A2A3(A)(A)(A)(A)
−1•A2A3

Mixed, Clear, Desert, Stream

Differential123456
−5(A)(A)(A)(A)AeAe
−4A3(A)(A)(A)(A)Ae
−3A2A3(A)(A)(A)(A)
−2•A2A3
  • 5.3 Stacking Restrictions
  • 5.4 Effects of Terrain
  • 5.4.1 Road Movement
  • 5.4.2 Trail Movement
  • 5.5 Mobile Movement Phase
  • 6.0 Zones of Control
  • 6.1 Effects on Movement
  • 6.2 Effects on Retreat & Advance After Combat
  • 7.0 Support Fire Markers
  • 7.1 Allocation of Support Fire Markers
  • 7.2 Support Fire Application
  • 8.3.1 Displacement
  • 8.4 Stiff Resistance
  • 8.5 Advance After Combat
  • A3
    (A)
    (A)
    +6,+7ExEx•A2A3(A)
    +8,+9D2ExEx•A2(A)
    +10D2ExExEx•A1
    (A)
    (A)
    (A)
    +2,+3Ex•A2A3(A)(A)
    +4,+5ExEx•A2A3(A)
    +6,+7D2ExEx•A2(A)
    +8,+9D2ExExEx•A1
    +10D2D2ExExEx•
    (A)
    (A)
    (A)
    +1Ex•A2A3(A)(A)
    +2,+3ExEx•A2A3(A)
    +4,+5D2ExEx•A2(A)
    +6,+7D2ExExEx•A1
    +8,+9D2D2ExExEx•
    +10D3D2D2ExExEx
    (A)
    (A)
    (A)
    0Ex•A2A3(A)(A)
    +1ExEx•A2A3(A)
    +2,+3D2ExEx•A2(A)
    +4,+5D2ExExEx•A1
    +6,+7D2D2ExExEx•
    +8,+9D3D2D2ExExEx
    +10DeD3D2D2ExEx
    (A)
    (A)
    (A)
    −1Ex•A2A3(A)(A)
    0ExEx•A2A3(A)
    +1D2ExEx•A2(A)
    +2,+3D2ExExEx•A1
    +4,+5D2D2ExExEx•
    +6,+7D3D2D2ExExEx
    +8,+9DeD3D2D2ExEx
    +10DeDeD3D2D2Ex