Robogear
Robogear Rulebook
Table of Contents
Table of Contents
Preparing for the Battle
Assembling Your Models
The first thing you need to do to play Robogear is to assemble your troopers and vehicles. Robogear models are very easy to put together, so it is worth sitting down and assembling everything at the same time. You will see that there are sometimes more weapons included with a model than can be mounted on it. In that case, choose exactly the weapons listed on that unit's unit sheet. Extra weapons let you turn a model into a different type of trooper or vehicle, but you do not need to worry about that yet.
You will need scissors or model clippers to separate the parts from the sprues. You may ask an adult to help. If you do it yourself, be careful not to cut yourself or the model instead of the sprue.
Painting Your Models
You can paint your models, but you do not have to do it straight away. If you are not sure how to paint them, you can ask an adult to help you.
Red and blue are the main colours of the two factions. Red is the colour of the Empire of Polaris, and blue is the colour of the Trading Protectorate. This does not mean that your whole army must be painted in that colour; sometimes a single shoulder pad or armour plate is enough. Just remember these colour differences when you paint your models.
Game Process
To play Robogear, first gather everything the battle needs. So before the fighting begins, make sure you have the following items.
Dice
Two dice, one for each player. Dice are also called d6.
Models
The Robogear game set contains two armies: the Empire of Polaris and the Trading Protectorate. The set also includes assembly-kit fortifications that can be used in Robogear games. Each army may use the buildings as a base or as a target.
(Faction symbols: the Empire of Polaris symbol and the Trading Protectorate symbol are printed on the page as images.)
Unit Sheets
Every war machine in the game has a card called a unit sheet. It tells you everything you need to know about that machine. Make sure you have one unit sheet for each war machine and one unit sheet for all of your troopers. Attach the plastic sliders to the unit sheets of the machines so that you can mark the damage taken and the reduction of ammunition. At the start, set each slider on the division with the highest number.
Symbols on the unit sheet:
- Cost (points cost);
- Close combat weapon;
- Real weapon;
- Virtual weapon;
- Resource;
- Armour scale.
Rulers
There are two range rulers in the set, one for each player. The rulers are marked in steps, so you can easily work out how far your models can move. They also mark the range categories, short and medium, which help you determine the range of your shots.
Playing Surface
This can be a kitchen table or the floor of a living room. The main thing is a flat surface; the rest does not matter much. It can even be a special game board.
Units
All models in your army, both vehicles and troopers, are called units. Each unit has a unit sheet, which shows everything you need to know about the unit in order to use it in the game. During the battle you and your opponent take turns acting with your units: moving them, shooting their weapons, or fighting in close combat.
Note: all units start the game with undamaged armour, and the armour slider must stand on the highest value on the left side of each unit sheet.
The Turn
In Robogear a battle is played in turns. During one turn, each unit in your army may act once. When all units on the table have finished their actions, the turn ends and the next one begins. The battle continues turn after turn until one of the players wins.
Who Goes First?
At the start of a turn, to decide whose unit acts first, both players roll a die. The winner, the player who rolls the higher number, opens the action. If the rolls are equal, roll again.
The player who won the roll chooses one of their units and acts with it. Then the opponent acts with one of their units, then the first player again, and so on.
A unit that has finished its actions cannot act again until the next turn. When all units on the table have finished their actions, the current turn ends, and the players begin a new turn with a die roll to decide who goes first in the new turn.
Squads
Infantry act in small groups called squads, usually of 4 troopers each. All troopers of a squad act at the same time. So when it is the infantry's turn to act, you carry out the actions of all four troopers of the chosen squad (one after another), and only then pass the turn to your opponent.
What a Unit Can Do
A unit chosen to act may move, shoot, or fight in close combat. The unit spends resource points on all of these actions. How exactly this is done is explained below.
Types of Units
Your army can consist of many different units. Several war machines and squads of troopers are included in the box. Others can be bought separately, so if you wish you can turn your army into an unstoppable force.
- Troopers are your well-trained soldiers, armed with futuristic weapons and protected by power armour. Troopers come in different specialties, for example riflemen, snipers, machinegunners and so on, so they can carry out a wide range of combat tasks.
- Tracked vehicles differ little from the tanks of today's armies and, like them, use powerful tracks for fast movement over rough ground. Sturdy and reliable tracked vehicles are useful in battle and work best with the support of infantry.
- War walkers are perhaps the mightiest units in your army, since they often carry the most destructive weapons and are protected by the strongest armour. War walkers perform best when they lead your troops into battle.
- Flyers are small, agile flying machines that dart over the battlefield, seeking out and striking the weak points of the enemy line. Their speed, manoeuvrability and the lethality of their onboard weapons make flyers the nightmare of your enemy.
How a Unit Moves
At the bottom of a unit's unit sheet you will find the resource symbol, followed by three boxes with numbers, one number for each coloured part of the armour scale. These numbers show how many units of resource you may spend on the unit's actions. For each unit of resource spent on movement, you may move the unit two steps. So if a unit has 4 resource, it can move up to 8 steps. As a unit takes damage, it loses resource and therefore moves more slowly.
Troopers move only 1 step for each unit of resource spent, not 2.
| Type of unit | Steps per unit of resource |
|---|---|
| Trooper | 1 |
| Tracked vehicle | 2 |
| War walker | 2 |
| Flyer | 2 |
All distances in Robogear are measured with the ruler.
The ruler is divided into steps, so you can easily calculate how far your unit can go. Place one end of the ruler against the front of the unit and the other end at the place where you want to move it. Then spend as many units of resource as needed for the required number of steps.
If there are obstacles on the unit's path, such as buildings or other units, it must go around them. The distance moved is measured with the ruler along the path of movement.
A war walker may step over an obstacle if the obstacle does not reach the point where its legs attach to the body. If the obstacle is higher than that, the war walker must go around it.
Flying units: if a flyer is in the air, its model is set on a stand. The flying height equals the height of the stand. So flyers easily fly over anything lower than the stand, and must fly around taller obstacles.
Points Cost
The unit sheet of each unit shows its cost (points cost) for the war machine or trooper. This number shows how powerful the unit is in battle: the higher the cost, the greater the unit's combat ability. Before a battle, you and your opponent may agree on a maximum number of points for your armies so that their forces are roughly equal. For example, if you agree to play a 500-point battle, the total cost of all units in each army must not exceed 500 points. How to reach that total is up to each player. The main thing is not to go over the agreed number of points.
As you start adding units to your Robogear army, cost becomes another strategic factor, because it makes you think about which units to build your army from for each battle.
Shooting
How a Unit Shoots
All units are armed with weapons that can fire. Sometimes there are a great many of them! Weapons come in two types: real and virtual. You can fire a real weapon yourself, by pressing its lever. A virtual weapon is a system that does not fire for real; it fires only in your imagination, hitting targets according to the result of a die roll. By the way, you do not have to fire a real weapon yourself if you do not want to.
On the unit sheet you can see the weapons with which the unit is equipped, together with the damage values, which we will come to shortly.
Shooting with machines: during a machine's activation, each of its weapons may fire only once. To make your machine fire one weapon, you must spend 1 unit of its resource. So the more weapons a machine carries, the more often it can attack the enemy. But many attacks require a large amount of resource, so spend your units' resource wisely.
Infantry shooting is described in detail later.
Line of Sight
To fire at an enemy, your unit needs line of sight; in other words, it must be able to "see" the enemy. If an obstacle stands between the shooter and the target so that the shooter cannot see the target, the shooter may not fire at all. Your unit does not have to see the enemy in full: it is enough to see part of the target for you to take the shot.
(The rulebook shows two diagrams: "Line of sight" and "No line of sight".)
Moving and Shooting
You may combine a unit's movement and shooting in any sequence, as long as you do not exceed the resource available. For example, from 5 units of resource you may spend 2 on shooting with two of your unit's guns and the remaining 3 on movement. Or you may spend 4 units on movement and 1 on a shot. Or you may spend all 5 units on movement, and so on.
Determining if a Shot Hits
To find out whether a shot hits, you must establish how far the target is from the shooter. Use the ruler to measure the distance between the shooter's weapon and the target. If your weapon has an ammunition counter, move the counter down one place for each shot fired from it. All weapons of real shooting have ammunition counters, as do some virtual weapons. When the ammunition runs out, the weapon is no longer used.
In Robogear the range of a weapon is divided into three categories: short, medium and long range. The closer the target is to the shooter, the easier it is to hit. The ruler will tell you which range category the target is in. Since the long range is twice the medium range, you can simply join two rulers together to get a measure of long range.
| Distance | Range category |
|---|---|
| 0–8 steps | Short |
| 8–16 steps | Medium |
| 16–32 steps | Long |
Once you know the range category of the enemy unit from the shooter, look in the table below to see what you need to roll on the die to hit. Declare which weapon is firing, and roll the die to hit. If the result equals or exceeds the number in the table, you have hit. It is that simple.
| Unit / Target | Short | Medium | Long |
|---|---|---|---|
| Trooper | 4 | 5 | 6 |
| Tracked vehicle | 3 | 4 | 5 |
| War walker | 3 | 4 | 5 |
| Flyer | 4 | 5 | 6 |
Covered target: a target is considered covered if more than half of it is hidden from the shooter. Naturally, it is harder to hit. The number needed to hit a covered target is increased by 1. So if, when shooting at a trooper at short range, under normal conditions a roll of 4 is enough, then when the trooper is in cover you need a 5 or more.
(The rulebook shows diagrams of an open target and a covered target.)
What a Weapon Does
On a unit's sheet, next to each weapon, there is a block of three digits. These are the weapon's power: the damage it inflicts on the enemy when it hits. The higher the number, the greater the damage the weapon deals at short, medium and long range respectively. Each point of damage reduces the target's armour by one point. The slider on the target's armour scale moves one division to the right, toward lower values. So a weapon with damage 4 reduces the enemy's armour by four points when it hits.
The three digits are given because a weapon deals different damage depending on the distance of the shot. For most types of weapon, damage increases as the target gets closer. But this is not always so, so read the unit sheets carefully.
If you look at the unit sheet of the TiRex, you will see that its machine gun has damage values of 7, 4 and 2. This means that, on a hit, at short range it deals 7 points of damage, at medium range 4, and at long range 2. Some weapons deal 0 damage at certain distances, which means they are completely useless at those ranges.
To make your units as useful as possible, shoot at targets from the distances at which your weapon does the most damage. But remember that the closer you get to the enemy, the closer you are to its attacks.
Critical hits: with the agreement of the other players, you may use the critical hit rule. If you roll a 6 on the hit roll, the hit may be critical. To find out whether it is, roll the die again, as if your unit were firing once more, and see whether this second shot is successful. If it hits, the shot is a critical hit and its damage is doubled. If it does not hit, the hit is an ordinary hit and deals ordinary damage.
For example, for a successful shot you need to roll a 4 to deal 5 points of damage to the opponent, and you roll a 6. Then roll the die again, and if you roll 4 or more, the hit is critical and the opponent takes 10 points of damage. If you roll less than 4, the opponent takes 5 points of damage, as from an ordinary hit.
A critical hit means that you have struck a vulnerable spot of the enemy unit, for example its engine or even its ammunition store.
Real Weapons
When shooting with a real weapon you do not need to roll the die to see whether you hit; you see it with your own eyes. If you fire and hit an enemy unit, the unit is hit just as if you had rolled the required number on the die. The advantage of real shooting is that you do not depend on luck: the success of your shot depends only on your accuracy!
If your shot knocks an enemy unit off its feet, the damage from the hit is doubled. All hits on a fallen unit also deal doubled damage.
If it is the knocked-down unit's turn to act, the player must spend all of that unit's resource to get it back on its feet.
If you fire a real weapon at troopers and hit several of them at once, they all count as hit by one shot. Mark the damage they have taken. Troopers are discussed later.
Accuracy of shooting: aiming a real weapon will be difficult at first. But if you practise before the battle, you will understand the basics of shooting, and when real weapons come into combat you will have a better chance of hitting than with a die roll. Remember: hard in training, easy in battle.
What a Hit Does
When a unit is hit by a shot, it takes damage: it gets cracks, dents or more serious harm. This depends on the weapon that caused the damage. The unit's armour is reduced by the amount of damage received from the hit. The unit's armour value is shown at the bottom of its unit sheet.
For each point of damage, slide the marker on the armour scale of the unit sheet one division. As the unit's armour falls, its resource is reduced, which limits its combat activity. While the slider is in the green zone, the unit is healthy, apart from a couple of dents on the hull. When you move the slider into the yellow zone, you should understand that the unit has serious damage and can no longer move as fast or shoot as often as before. If the slider is in the red zone, the unit moves even more slowly and will not last long.
When the armour points run out, the unit is destroyed! Tip it over to show that it no longer takes an active part in the battle. If it is large enough, troopers and machines may hide behind it as cover.
Zero Armour
When a unit is destroyed, it often blows up in a huge fireball. When this happens, there is a small chance that the pilot survived. Roll the die; on a roll of 6 the pilot is unharmed and may fight on as a trooper (a Rifleman). However, this is possible only if you have a spare trooper model to use as the pilot. Attach the pilot to one of the infantry squads. From then on, the pilot acts with that squad.
Ramming
How Ramming Works
During its movement, any vehicle (but not a trooper) may deliberately ram an enemy model. To ram, the unit must start at least 4 steps away from the target, otherwise it cannot build up the speed it needs. Your unit must be able to make at least 4 steps at the end of its movement to touch the enemy model; otherwise the ram does not take place.
Once the models are touching, you can work out the result of the ram. Be warned: if you are unlucky, your unit may come off worse than your opponent's. Roll the die and add the result to your unit's current armour level, shown by the slider on the armour scale. If your unit has a close combat weapon, marked on its unit sheet by the close combat symbol, add that weapon's power to your total.
RAM POWER = D6 ROLL + ARMOUR + CLOSE COMBAT WEAPON
Your opponent does the same for their unit. Then you compare the results. If your result is higher, you win; if your opponent's result is higher, they win. Use the table below to find the damage dealt to your unit and to the enemy unit, and reduce the armour scales accordingly.
| Ram result | Damage |
|---|---|
| Winner | D6 |
| Loser | D6 × 2 (doubled damage) |
| Tie | D6 to each machine |
If a unit knocked down by a shot is rammed, it always counts as the loser.
Example: a Protectorate Werewolf rams an Empire Spider. To work out the Werewolf's ram power, its owner rolls the die and gets 4. This result is added to the Werewolf's current armour of 16. To this sum we add the power of the close combat weapon fitted to the Werewolf (4 in total). So the Werewolf's ram power is 24 (4 + 16 + 4). The Spider has no close combat weapon, so its ram power is found by adding the die roll (a 3) to its armour (15), giving 18 in total. Since the Werewolf wins the ram, it takes D6 damage, while the losing Spider takes D6 × 2 damage.
(In the source the figures beside the example read "+16+1+3=24" and "+15=18"; the text above is followed, as noted in the Table of Contents.)
Remember that ramming is part of moving, and you must have enough resource to move the required minimum of 4 steps before you can perform a ram.
Ramming with flyers: if a flyer takes part in a ram, both the flyer and its pilot are considered destroyed and leave the game. However, if a flyer rams a ground target, then even though the flyer is destroyed, the result is still worked out to find how much damage the target takes.
Ramming a Trooper
Tracked vehicles and war walkers may attempt to run over troopers. As in an ordinary ram, the unit must touch the trooper or its stand. In this case the player controlling the trooper rolls the die, consults the table, and marks the damage taken on the trooper's stand.
| Die roll | Damage |
|---|---|
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | None (the trooper jumps 1 step to any side) |
| 6 | None (the trooper jumps 1 step to any side) |
Flyers cannot ram troopers: if they descend to do so, they crash.
Unit Notes
Protectorate War Walker: TiRex
The most modern and most powerful war machine in the forces of the Protectorate is the TiRex, an all-terrain assault war walker. Built for close combat, the TiRex carries a fearsome arsenal of systems for destroying the enemy. Protectorate soldiers gave it its name not only for its resemblance to the ancient Tyrannosaurus, but also for the fear the machine inspires in the Imperials.
- Weapons: a pair of 40 mm machine guns and a twin mount of 240 mm multipurpose rockets. The arsenal was chosen so that no conventional war machine in the universe could survive a salvo of all its systems at close range.
- Armour: three layers of tungsten alloy, laid out so that, without significant loss of mobility, it deflects all Imperial attacks except the most savage.
- Crew: TiRexes are piloted by the best of the Protectorate's pilots, veterans who have proved their skill in battle. Those trusted to pilot a TiRex accept the posting as a reward and a high honour, and they compete for it fiercely.
Troopers
Trooper Stands and Unit Sheet
Each trooper's stand has an armour counter, used to record the damage it takes. Simply slide the lever one division for each point of damage the trooper takes. When there is nowhere left to slide it, the trooper is destroyed!
Since you record each trooper's damage on its stand, you do not need a separate unit sheet for every individual soldier. For all troopers you have one shared unit sheet, which records the data for each type of trooper.
(The source page labels the shared unit sheet's columns "Armour scale", "Resource" and "Virtual weapon".)
Just as with machines, troopers move more slowly as they take damage. The counter on the trooper's stand shows how much damage it has taken, and the unit sheet states how many units of resource it has left.
Types of Troopers
The shared unit sheet lists four types of trooper: Rifleman, Sniper, Machinegunner and Bomber.
- Rifleman is the first trooper from the left on the unit sheet. Armed with a pulse rifle. Each shot costs it 1 unit of resource.
- Sniper is the second from the left on the unit sheet. An expert in accurate shooting, armed with a sniper rifle with a powerful scope. He shoots better than other troopers at long range. With each of his shots, add +1 to the hit roll, so that if the die shows 4, count it as 5. But because a sniper needs much time for an aimed shot, he spends 2 units of resource per shot from his rifle.
- Machinegunner is the third from the left on the unit sheet. He carries a heavy pulse machine gun that fires twice as fast as the pulse rifle. The machinegunner acts in the same way as a rifleman, but for each unit of resource spent he is entitled to two separate shots from his weapon, one after the other. So he can fire at one enemy and then at another, or put both shots into the same opponent.
- Bomber is the first from the right on the unit sheet. Armed with a powerful bazooka. Because of the difficulty of aiming it, the bomber must spend 2 units of resource per shot.
Moving Troopers
Troopers act as a unit of their own, moving and shooting in the same way as machines. The difference is that you do not move a single trooper but a whole squad.
Troopers act in small groups called squads, usually of four troopers. All troopers of a squad act at the same time, so when the infantry's turn comes, you carry out the actions of all four troopers of the chosen squad, one after another, and only then pass the turn to your opponent. The troopers of one squad do not have to stay together; they can be in quite different places on the table. What matters is that all troopers of a squad act at the same time.
Troopers move 1 step for each unit of resource spent. They may cross obstacles at half speed: measure the height of the obstacle (rounding up to the nearest whole step), and to overcome it the trooper must spend twice as many resource points as it would spend to cover the same distance on level ground. Ladders make it easier to cross obstacles, so the resource cost is reduced as if the trooper were walking on level ground.
As other units, troopers may fire only once per turn from one weapon. Usually a trooper has only one weapon, so it can make only one shot when its turn comes.
How to Make a Squad
A squad is up to four troopers. When creating a squad, you may include any troopers you like, as long as the squad does not exceed four models. During a battle, a squad may be left with three, two or even one trooper; they still count as a squad.
Pilots: if pilots of destroyed machines join your squad, the squad may have up to six troopers. If you have several pilots, try to spread them as evenly as possible between your squads.
How Troopers Fight
A trooper that touches the stand of an enemy trooper may fight it in hand-to-hand combat, using its hands, feet and any weapons it carries. Troopers cannot fight machines.
To find out the result of close combat, both players roll the die and add their troopers' armour values.
FIGHT POWER = D6 ROLL + ARMOUR
The player whose fight power is higher wins the fight. The loser takes damage equal to the difference between the two fight powers. If the fight ends in a tie, each trooper takes 1 point of damage. Mark the damage on the stand.
Example: a Protectorate Rifleman fights an Empire Sniper. The Rifleman rolls a 5 on the die, and adding his armour of 3 gives a fight power of 8. The Sniper also rolls a 5, but his armour is only 1, so his fight power is 6. The Sniper loses and takes 2 points of damage (8 − 6 = 2). Since his armour was only 1, he is destroyed.
Remember that a trooper engaged in hand-to-hand combat cannot use its shooting weapon, because it is in contact with the enemy. If you want to take it out of close combat, simply move it away by the normal rules when its turn comes.
The Golden Rule
Sometimes you may disagree with your opponent, for example about whether a trooper is visible to the enemy or not, and there are many such cases. To avoid spoiling the enjoyment of the game and to save an argument, use the Golden Rule: you and your opponent each roll the die. If your roll is higher, you are right; if your opponent's roll is higher, they are right. If both results are the same, roll again.
Example of Play
The distant, primitive world of Tarrus 5 is stuck at a low level of technological development, but it has rich reserves of minerals and ores important for interstellar travel. The armies of the Empire of Polaris and the Trading Protectorate seek to subjugate this planet.
A fierce battle has raged for two days; in brutal clashes, mighty war machines and elite warriors of both armies are being destroyed. And now, when the ammunition is already running low, the Imperial commander throws the remnants of his forces into a final attack…
Forces of the Protectorate: TiRex, a squad of 2 troopers (a Bomber and a Sniper); Raptor; Salamander.
Forces of the Empire: Locust, a squad of 2 troopers (a Rifleman and a Bomber).
(The source's force diagram also shows a column of troopers, Sniper, Rifleman, Machinegunner and Bomber, for each side. The text does not say which of them take part in the example, so only the units named in the text are listed here.)
Starting positions: both forces begin the battle 20 steps apart, with no obstacles between them.
Initiative: both players roll the die. The Empire rolls 4 and the Protectorate rolls 3, so the Empire begins the battle.
First Imperial turn. Despite the presence on the field of the mighty TiRex, the Imperial war walker Locust rushes forward, trying to engage without delay. It spends 4 units of resource on 8 steps of movement (2 steps per unit), which leaves it 2 units of resource to fire each of its two rapid-fire cannons once. The TiRex is 12 steps away, and the pilot judges the target to be at medium range. To hit with the cannons the player needs at least 4 on each roll, but Locust has an improved targeting system (+1 bonus), so a 3 is enough to hit. Two dice are rolled: one shows 3 and the other 6. Both shots hit, but one result is a 6, which may be a critical hit. The damage from that shot would be doubled if the next roll gives a result of at least 3, but the die shows 2, so the damage is not doubled. The TiRex is shaken by serious damage of 10 units.
First Protectorate turn. Vard, the pilot of the TiRex, is shaken by Locust's attack. He is encountering such a machine for the first time, but the time has come to show the Empire what a furious TiRex can do.
It is hardest for Vard to choose the attack distance. He decides to close to short range and attack Locust with his machine guns.
Having taken 10 points of damage, the TiRex is left with only 4 units of resource, because its armour has dropped by 10 divisions. This is not enough for a volley from all its guns, so Vard spends 2 units to move 4 steps, shortening the distance between Locust and the TiRex to short range, since Locust already stands 8 steps away. After this, the TiRex fires from its two machine guns.
The player rolls two dice. For a hit at short range, a roll of 3 or higher is needed. The TiRex gets 4 and 5, two successful hits. Locust takes 14 points of damage and is left with 1 point of armour.
Second Imperial turn. Seeing that Locust is in trouble, the infantry joins the battle. Both troopers of the squad act at the same time. The Bomber has 5 units of resource, and firing his weapon costs 2. He moves 3 steps (1 step per unit of resource) and fires. The TiRex is at medium range, so a 5 is needed to hit. The lucky player rolls a 6, which may be a critical hit. The re-roll gives 5. Yes, it is a critical hit! Having taken 6 points of damage, the TiRex is left with 4 points of armour. Now the Sniper moves 5 steps and spends 2 units of resource on an aimed shot. He has a +1 accuracy bonus and needs a 4 to hit, but he rolls a 6, then a 4, and the TiRex takes another critical hit. That is 4 more points of damage, the TiRex's armour drops to 0, and the Protectorate war walker is destroyed.
Second Protectorate turn. After the destruction of the TiRex, the Protectorate troopers must try to destroy Locust, and then choose whether to retreat or continue the fight with the Imperial troopers. They are now 12 steps from Locust, and the Bomber decides to move 3 steps closer. The distance shrinks to 9 steps, but the target is still at medium range.
A 5 is needed to hit; the die shows 4, a miss. The Rifleman runs 6 steps (he has 7 units of resource, and the shot needs only one of them). Locust is now 6 steps away, which is short range. The Rifleman pulls the trigger, hoping for a 5 on the die. A 5 comes up. Two points of damage turn Locust into a smoking heap of twisted metal.
End of turn. Having lost their war walkers, the troopers of both sides decide to retreat. The battle is over.