RulesPal
Chat
Rulebook
Rifles in the 'Nam thumbnail

Rifles in the 'Nam

Rifles in the 'Nam Rulebook

Table of Contents

Table of Contents

  • 1 Game Overview
    • 1.1 Game Components Included
    • 1.2 The Player Will Need to Provide
    • 1.3 Games Conventions and Abbreviations
    • 1.4 Units
      • 1.4.1 Morale and Morale Check
    • 1.5 Map Cards
    • 1.6 Terrain
      • 1.6.1 Terrain List
    • 1.6.2 Barbed Wire
    • 1.6.3 COVER markers
    • 1.6.4 Booby Traps
    • 1.6.5 Line of Sight
  • 2 Game Sequence
    • 2.1 Mission Setup
      • 2.1.1 Setup Terrain
      • 2.1.2 Place Event Markers
    • 2.2 Squad Selection
    • 2.3 Enemy Selection
    • 2.4 Mission Execution
  • 3 Game Turn
    • 3.1 Group Creation
    • 3.2 Friendly Units' Activation
      • 3.2.1 Available Friendly Unit Actions
    • 3.3 Enemy Presence Check
      • 3.3.1 Enemy Entrance
    • 3.4 Event Markers
      • 3.4.1 Peeking Event Markers
    • 3.5 Enemy Force Activation
    • 3.5.1 Enemy Attack
    • 3.5.2 Hopeless Enemy Attacks
    • 3.5.3 Enemy Units in Special Terrain
  • 4 Combat Procedure
    • 4.1 Target Selection
    • 4.2 Attack Roll
    • 4.3 Area Effect
    • 4.4 Suppression (Damage)
    • 4.5 Cover Fire
    • 4.6 Close Combat
    • 4.6.1 Engagement and Close Combat End
    • 4.6.2 Joining a Close Combat
    • 4.6.3 Enemy Units Entering Close Combat
    • 4.7 Recovery
  • 4.8 Special Weapons
    • 4.8.1 Grenades
    • 4.8.2 Grenade Launchers
    • 4.8.3 Weapon Mount
    • 4.8.4 Claymore Mines
  • 4.9 Fire Support
  • 5 Leadership
    • 5.1 Leadership Effects
    • 5.2 Fire Group
  • 6 Helicopter Operations
    • 6.1 Landing Zones
    • 6.2 Assigning units to helicopter
    • 6.3 Landing
    • 6.4 Embarking
  • 7 Hidden Units
    • 7.1 Gaining the Hidden Status
    • 7.2 Effects of Being Hidden
    • 7.3 Losing the Hidden Status
    • 7.4 Spotting
  • 8 Night Rules
  • 9 Tunnel Rats Missions
    • 9.1 Tunnel Map
      • 9.1.1 Movement
      • 9.1.2 Range
    • 9.2 March Line
    • 9.3 Equipment
    • 9.4 Actions Available
    • 9.5 Combat
    • 9.6 Enemy Activation
  • 10 Hue Special Rules
    • 10.1 City Terrain
      • Multi-story buildings
      • Enemy Movement
    • 10.2 Exposed Movement
  • 11 Civilians
  • 12 Mission End
  • 13 Campaign Game
    • 13.1 Starting a New Campaign
    • 13.2 Fatigue
    • 13.3 Campaign Turn
    • 13.4 Squad Assignment
    • 13.5 Reinforcements Request
    • 13.6 New Campaign Mission
    • 13.7 End Mission Briefing
      • 13.7.1 Experience Points
    • 13.8 Fatigue Check
  • 14 Advanced Rules
    • 14.1 Mortars
    • 14.2 Grenade Launchers

1 Game Overview

The game uses three Maps to represent the terrain of the engagements. Each mission will define the objectives to reach, and you'll then be responsible for selecting the best units to reach those objectives. A simple Artificial Intelligence (AI) system will activate the Enemy units, and the placement of Event Markers on the Map will introduce the required "Fog of War," uncertainty, and suspense.

1.1 Game Components Included

  • This Rules Booklet
  • One Mission Briefing booklet
  • Four Army Sheets (on two sides of 8 ½" x 11" cards), covering the main armies of the Vietnam War and an Army Overview Sheet.
  • One Master Copy Unit Roster (on the back of the game's cover), for easy duplication.
  • Three 8 ½" x 11" Map Cards
  • One Squad Examples Card (on the back of the Map Card)
  • 105 Counters in 2 counter sheets

1.2 The Player Will Need to Provide

  • Five six-sided dice (d6). If the game asks you to roll 1d3, simply roll one die and halve the result (rounding up).
  • An opaque container for randomly drawing counters (a plastic cup or that little velvet bag which once contained a bottle of liquor will do nicely).

1.3 Games Conventions and Abbreviations

  • 1d6 One standard six-sided die.
  • ATTRIBUTE Unit attributes are listed in italicized capital letters.
  • AD Activation Dice: used in Friendly units' activation (See 3.2).
  • AP Action Points: used to activate your Squad (See 3.2).
  • BAP Bonus Action Point (See 3.2).
  • BP Build Points: used to create your Squad at the beginning of a Mission (See 2.2).
  • CF Combat Factors: Die Roll Modifiers (DRMs) to the combat roll (See 4).
  • DRM Dice Roll Modifier: a number (positive or negative) to be added to the dice roll.
  • EM Event Marker: brown markers with a question mark on one side and a white number on the other side (See 2.1.2).
  • HMG Heavy Machine Gun.
  • LMG Light Machine Gun.
  • MARKER Names on counters or markers are listed in bold capital letters.
  • RP Recon Point (See 3.7).

1.4 Units

Each unit in the game has the following attributes:

  • Army: each unit belongs to one of three Armies (United States – USA/USMC, North Vietnam, Viet Cong), with unit counters bearing a color and symbol distinct to that Army.
  • Name: a short description of the unit and/or its equipment.
  • ID: a letter, used to identify the unit. Each Unit is represented on the Map by a counter with the corresponding ID.
  • Type: Basic or Armored . Basic units represent single foot soldiers and gun crews. Armored units represent Vehicles (Tanks, Armored Cars).
  • Range: the max distance between the unit and its target of attack.
  • Combat Factors : the Die Roll Modifiers (DRMs) when attacking an Enemy Unit.
  • Target Number : the value that must be reached to damage the unit in combat.
  • Attributes: additional traits of the unit, including special combat effects.
  • Build Points : the cost of the unit.

1.4.1 Morale and Morale Check

Unless specified otherwise, all units in the game have a "Line" Morale of 3. Any Units labeled as "Veteran" have a morale of 2, while "Green" Units have a morale of 4.

Some events and some specific actions can require a unit to execute a Morale Check; in such a case roll 1d6. If the result is equal to or greater than the Morale of the unit, the check is successful.

1.5 Map Cards

A game Map Card is divided into six horizontal stripes, numbered from 1 to 6 and always referred to in these rules preceded by a hashtag (#). Stripe # 1 normally represents the Enemy area, while Stripe #6 is the entry point of your troops. Movement is always performed from one stripe to the previous or next one.

A reference to the "Previous Stripe" means "the numerically precedent stripe". So, if an event was triggered on Stripe #3 and refers to the previous stripe, then the event is executed on Stripe #2. Exception: If you have units on Stripe #1 and a rule refers to the previous stripe, the units will remain on Stripe #1.

A reference to the 'EM stripe' means the Stripe where the EM is located.

1.6 Terrain

Terrain is represented on the Map Card with Terrain markers. There are two types of terrain markers:

  • Base Terrain Markers: These represent a terrain type that applies to the whole stripe (example: JUNGLE). Every unit on a stripe with a base terrain marker will be influenced by the terrain effects (ex. cover, difficult movement). Unless otherwise specified, a Base Terrain Marker always blocks the line of sight (see 1.6.5).
  • 3.5.4 Overwatch Fire
  • 3.6 Decrease the Game Turn
  • 3.7 Recon Points
  • SMG Submachine Gun.
  • TN Target Number (See 4).
  • Terrain Features (identified by a red point on the marker): These represent a specific element of terrain (example: BUILDING) that can provide cover only to a limited number of units. Terrain Features never block the line of sight. Each Feature can only support one Group of a maximum of four units of the same side (Friendly or Enemy). Enemy units will occupy a Terrain Feature only when instructed by the Mission Sheet instructions, while Friendly units may occupy a Terrain Feature by moving on it. When you form a Group, create a stack of counters with each unit in the Group. When the Group moves, move it as a stack to another stripe, and when it enters a terrain feature, place the Group on top of it.
  • A number in the lower right corner represents the cover points of the terrain. This number is added to the occupying Target's TN during combat.

    1.6.1 Terrain List

    • OPEN (Base): no impact in the game and does not block Line of Sight (1.6.5).
    • JUNGLE (Base): TN+1 to all units on the stripe.
    • DEEP JUNGLE (Base): TN+1 to all units on the stripe. 2 AP to enter. Enemy units revealed in Deep Jungle (as a result of an Event Marker) or starting in Deep Jungle are always considered HIDDEN. No Reconnaissance Movement is possible in this terrain.
    • TREE (Feature): TN+1 to the units occupying the Terrain Feature.
    • FOX HOLE (Feature): TN+1 to the units occupying the Terrain Feature.
    • VILLAGE (Base): TN+2 to all units on the stripe.
    • BUILDING (Feature): TN+2 to units occupying the Terrain Feature.
    • FIELDS (Base): TN+1 to all units on the stripe only from attacks at Range 1 or greater. Fields do not block line of Sight (1.6.5).
    • RICE PADDY (Base): units moving on a Rice Paddy stripe cannot attack in the same turn. Spending 1 BAP to move cancels this limit but in this case, you won't get an RP. Spending 1 RP cancels this limitation. Rice Paddies do not block line of Sight (1.6.5).
    • ELEPHANT GRASS (Base): TN+1 to all units on the stripe. Enemy units revealed in Elephant Grass (as a result of an Event Marker) or moving on it are always considered HIDDEN. No Reconnaissance Movement is possible in this terrain.

    1.6.2 Barbed Wire

    Barbed Wire is normally placed on the map as a result of an Event Marker resolution. Use an OBSTACLE marker to represent the Barbed Wire and place it adjacent to the Group that caused the Event resolution.

    While adjacent to Barbed Wire, a unit cannot execute any action except a "Move." Spending one AP for the "Move" action allows the group one attempt to remove the OBSTACLE marker.

    To attempt the removal of the Barbed Wire, roll 1d6. On a result of 4 or more, the OBSTACLE is removed. Spending a Bonus Action Point (BAP) grants the unit a Die Roll Modifier (DRM) of +2. While adjacent to Barbed Wire, a group suffers a DRM of +1 to any attack against it (cumulative with any other DRMs).

    1.6.3 COVER markers

    While not corresponding to a specific terrain, COVER markers are placed during the game to represent your units maximizing the protection of their current location. A COVER marker is placed on top of a group/unit, regardless of the presence of a terrain feature (like a Tree) and provides a +1 TN to the group. Units under a COVER marker are still visible (see the HIDDEN rules for units not visible to the enemy). COVER markers are normally removed when a unit moves.

    1.6.4 Booby Traps

    Booby Traps are normally placed on the map as a result of an Event Marker resolution. Use a BOOBY TRAP marker and place it adjacent to the Group that caused the Event resolution.

    While adjacent to a Booby Trap, a unit cannot execute any action except a "Move." Spending one AP for the "Move" action allows the group one attempt to remove the Booby Trap marker.

    To attempt the removal of a Booby Trap, roll 1d6. On a result of 3 or greater, the BOOBY TRAP is removed; on a result of 1 or 2 the trap is triggered: remove the marker and inflict one Suppression damage to a random unit in the group. While adjacent to a Booby Trap, a group suffers a DRM of +1 to any attack against it (cumulative with any other DRMs).

    1.6.5 Line of Sight

    Units in the same or adjacent stripes can always see each other.

    Units at two or more stripes apart can see each other only if no stripe between the units has a Base Terrain Marker on it. Exception: the "Fields" and "Rice Paddy" Base terrains do not block the line of sight.

    Example: Stripe #4 has a "Village" Base Terrain Marker on it. A unit on Stripe #3 cannot see a unit on Stripe #5 (and vice versa) since the intermediate stripe is blocking the Line of Sight.

    2 Game Sequence

    A game session always follows the following sequence:

    • Mission Setup
    • Squad Selection
    • Mission execution
    • End-Mission briefing (for Campaign game only)

    2.1 Mission Setup

    Select one of the available missions: 12 missions are available; each mission is described by a Mission Sheet in the Mission Briefing Booklet. If this is your first game, you should select Mission 1.

    Place the GAME TURN Marker on the space of the Turn Track corresponding to the number of Game Turns available for the selected mission. A Turn Track is located on the bottom of each Squad Roster.

    Example: If the Mission Sheet specifies "Game Turns: 12" place the GAME TURN marker on the space labeled "12" in the Turn Track.

    The Turn Track is printed as two rows of numbered spaces: 1 to 6 across the top and 7 to 13 across the bottom (the GAME TURN marker is shown on space 12 in the printed illustration), with the label "GAME TURN TRACK" at its left end.

    2.1.1 Setup Terrain

    Roll 1d6 for each stripe and determine the Terrain type, consulting the [Terrain Table] on the Mission Sheet. Place the corresponding Terrain Marker on the stripe.

    2.1.2 Place Event Markers

    Place the Event Markers (EM) specified in the [Event Section] section of the Mission Sheet in an opaque container. Draw and place face-down the Event Markers according to the Mission instructions (normally one marker per stripe). Discard the Event Markers not used (if any) without looking at them.

    2.2 Squad Selection

    Select one of the following playable Armies. Take a blank Unit Roster to keep track of your units.

    • United States of America – Army (USA)
    • United States of America – Marines (USMC)

    The Army Sheets include all information required to play each Army, including the unit details and the tables to generate the Enemy forces.

    Each Army provides a maximum value of Build Points (BP) to create your Squad, printed directly under the name of the Army's nationality, on the Army Sheet. Some Missions may provide additional BP or specific unit types as attachments.

    Select your units, using available BP (see the Unit Section on the Army Sheet) and Equipment (see the Equipment Section on the Army Sheet). For each selected unit, write on the Unit Roster the Unit Name (often corresponding to the weapon) and then select one counter to represent the unit. Write the corresponding ID (the letter in the upper left corner of the counter) on the Unit Roster.

    Example: I'm starting a new Mission playing with the US Army. The US ARMY provide 12BP that I use to create the following squad:

    UnitWeaponBP
    LeaderM161
    2xAssistant LeaderM162
    2xGrenade LauncherM794
    4xRiflemenRifle4
    8xGrenades1

    The selected Equipment can be freely distributed among your units; the notes in the Equipment section of the Army Sheet will define the limits and/or restrictions of their allocation.

    2.3 Enemy Selection

    Consult the "Enemy Forces" box in the Mission Sheet: this will determine the enemy army sheet to use in the mission, North Vietnam Army (NVA) or Viet Cong (VC). If required, roll one die to select the enemy army.

    2.4 Mission Execution

    Unless instructed otherwise by the Mission rules, place your units just below the bottom of the Map Card, under Stripe #6. This special Entry Area is adjacent to Stripe #6 for movement purposes, but you cannot fire, nor can you be attacked while on this entry Area.

    You can now start the first Game Turn. Repeat the Game Turn procedure until you reach the Mission Objective(s) or the Mission turn marker goes below 1 and is lost (see 12).

    3 Game Turn

    During each Turn you will follow the sequence below:

    • Group Creation
    • Friendly Units Activation
    • Enemy Presence Check
    • Enemy Forces Activation
    • Decrease Game Turn Marker

    3.1 Group Creation

    At the beginning of each turn, friendly units on the same stripe can be redeployed to form one or more Groups of adjacent units. (NOTE: You cannot redeploy units while on a stripe with a River Terrain Marker). A Group can be activated as a single entity during the turn, regardless of the number of units included. Groups may also be formed on the first turn before moving onto the map, and then moved as a single Group.

    Enemy units are always deployed as a single Group unless specified otherwise.

    Groups in Combat. Combat is always performed targeting a specific Group: only units belonging to the Target Group will be affected by combat outcomes. Weapons with the AREA EFFECT attribute can affect multiple units belonging to the target Group.

    Play Note: Creating Groups makes it possible to activate multiple units with a single Action Point (see below) and hence is a very important element of player strategy.

    Isolated units are inefficient and groups with more than five units tend to be difficult to control. You may find it helpful to keep your units in Groups of three to four soldiers (the limit for occupying a terrain feature 1.6).

    At the end of the Group Creation Phase, check for the Support Fire Markers on the Map (see 4.9).

    3.2 Friendly Units' Activation

    Roll three dice: those dice will be referred to as Activation Dice (AD). Discard any AD with a result of 1 or 2.

    An AD with a result of 3-5 provides one Action Point (AP) to your Squad.

    An AD with a result of 6 provides a Bonus Action Point (BAP) to your Squad.

    You can now spend APs to activate your units. BAPs can always be spent as APs, but they can also provide extra effects for some actions, so use them wisely! Actions that can benefit from BAPs have an asterisk after their name. AP or BAP not spent on a turn are lost.

    Select one Group and allocate one or more APs to execute one of the available actions. Repeat until all the APs have been spent. Unused APs or BAPs are lost (you cannot save them).

    Regardless of the number of available APs, a unit can only attack once per game turn.

    3.2.1 Available Friendly Unit Actions

    • Move one Stripe*: move the selected Group one stripe up or down. You may spend one BAP to gain one Recon Point (RP) (see 3.7). Remove COVER marker from the Group (if any). Exception: to enter a stripe with a Deep Jungle Terrain Marker you must spend two APs.
    • Move to Terrain Feature*: move the selected Group to a Terrain Feature on the current stripe. You may spend one BAP to gain one Recon Point. Remove COVER marker on Group (if any).
    • Take Cover: the selected group gains one cover point (place a COVER marker or a die with a 1 as a reminder). You can only gain one COVER point per Group. You cannot gain a COVER point while on a stripe with a River Terrain Marker or if the current terrain (Base or Feature) provides a TN bonus of 2 or more.
    • Fire*: the selected Group may attack one target (see Combat, Section 4). You may spend one BAP to gain a +1 DRM.
    • Overwatch*: place an OVERWATCH marker on the selected Group. See 3.5.4 for the details about Overwatch fire. You can spend one BAP to cancel the -1 DRM normally associated with Overwatch fire. You cannot select this action for a Group that has already attacked on this turn.
    • Flanking Fire (cost: two AP): the selected Group can attack one target with a Flanking Bonus (see the Combat Modifiers Section on the Unit Roster Card).
    • Reconnaissance Movement (cost: two AP): move the selected Group one stripe up or down and gain one Recon Point (RP) (see 3.7). The moving Group must include the Leader. The RP is gained after any event roll (i.e. Mission special rules, exposed movement) and after revealing any EM (if any). Cannot be selected to enter a stripe with a Deep Jungle or Elephant Grass Terrain Marker or in the Tunnel Missions.
    • Recovery*: you can roll for the recovery of any SUPPRESSED units in the selected group (cost: one AP if the Leader is in the Group, one BAP if the Group has no Leader). Exception: recovery is never possible on a stripe with a River Terrain Marker or a Shallow Water Terrain Marker; engaged units cannot be recovered.
    • Hide: place one HIDDEN marker on the selected Group. This action cannot be taken if the Group executed any type of attack on this turn (see Section 4). "Hide" actions cannot be selected on a stripe with a River Terrain Marker, Beach Terrain Marker, or a Shallow Water Terrain Marker.
    • Spot*: the selected Group can attempt to spot a HIDDEN Enemy Group. You can spend one BAP to gain a +2 DRM on the spot roll (7.4).
    • Close Combat*: the selected Group can attempt to enter Close Combat against an Enemy Group in the same stripe. You can spend one BAP to gain a +1 DRM to the Morale Check to execute the Close Combat (see 4.6). Engaged units can spend one BAP to gain a +1 DRM on the attack.
    • Cover Fire*: the selected Group can attack one Target to reduce its effectiveness (see 4.5). You can spend one BAP to gain a +1 DRM.
    • Redeploy: remove one COVER marker from an Enemy Group on the same stripe of the selected Group or in an adjacent stripe.

    3.3 Enemy Presence Check

    If one or no Enemy units are present on the Map Card, roll 1d6 and consult the [Enemy Presence Table] on the Mission Sheet. If more than one Enemy UNIT is already present on the Map Card, skip this phase. If no additional information is specified, place the new enemies on Stripe #1.

    3.3.1 Enemy Entrance

    When an entry on the Mission Sheet includes a phrase beginning with "Enemy: "(example: "Enemy: 2xRifle"), a new Enemy Force must be immediately placed on the Map Card following the entry instructions. The entry instructions will always include the list of Enemy units to deploy: if no additional information is specified, those forces are placed on the stripe containing the Event Marker that triggered the entry.

    Sometimes Enemy forces must be placed on a specific Terrain Feature. In such a case, if the Terrain Feature is not present, place a new Terrain Marker on the stripe with the missing Terrain Feature.

    Example: the entry on the [Event Table] reads "Enemy: LMG on a BUILDING on previous Stripe." If on the previous stripe there is not a BUILDING, you must place a BUILDING on the stripe, then place the Enemy Counter.

    Enemy Units are always deployed as a single Group unless specified otherwise.

    3.4 Event Markers

    Event Markers (EM) are placed face down at the beginning of a mission and are immediately revealed:

    • When a Friendly Group enters the stripe where the Event Marker is located. If more than one marker is present in the stripe, reveal one of the markers (your choice), or
    • When a Friendly Group is activated on a stripe where a face-down marker is present. If more than one marker is present on the stripe, reveal one of the markers (your choice).

    Once an Event Marker is activated (revealed) you must consult the [Event Table] on the Mission Sheet to determine the outcome. Follow the instructions on the table.

    A reference to the "active Group" on the [Event Table] represents an effect that will impact the Friendly Group who caused the marker activation.

    3.4.1 Peeking Event Markers

    Some Events can allow you to "peek" at an Event Marker. In such a case, you can freely look at the hidden side of the EM and then put it back face down on the Map. Peeking at an EM doesn't activate (reveal) it, this simply represents some intelligence about the place and/or the Enemy forces in the area.

    3.5 Enemy Force Activation

    If Enemy units are present on the Map Card, roll 1d6 for each Enemy Group and consult the [Enemy Activation Table] on the Mission Sheet. Possible Enemy Actions are:

    • Attack: each unit in the Enemy Group executes an attack roll. See the attack procedure in 3.5.1. If no Friendly unit is in range, then Advance towards the nearest Friendly unit. Order interpretation: the Enemy unit will fire if possible, and otherwise will move towards its adversary forces.
    • Close Combat: the Enemy Group executes a Close Combat attack if there is a Friendly Group at Range 0, otherwise executes a standard attack roll. Only Enemy Units equipped with a Pistol, Rifle, SMG or Assault Rifles will enter Close Combat, and only if the activated Group has an equal or greater number of units than the Friendly Group. In any other case, treat a "Close Combat" order as an "Attack" order. Order interpretation: the Enemy Group will attempt to close with and destroy a Friendly Group by close combat.
    • Cover: if the unit or Group is not already on a Terrain Feature and there is an available Terrain Feature on the stripe, move the unit or Group onto it. Otherwise, place one COVER marker on the Enemy Group (if not already present). Order interpretation: use the Terrain and/or the COVER Markers to improve defense.
    • Advance: remove the COVER marker from the Enemy unit or Group (if any). The Enemy unit or Group is moved one stripe toward the nearest Friendly Group. If an empty Terrain Feature is present on the stripe, the Group will move onto it (priority: best TN). If no empty Terrain Features are present and Friendly forces are on the stripe, place a COVER marker on the Group. Order interpretation: move using the terrain to gain the best defensive position. Avoid entering an area with hostile forces if no protection is available.
    • Recovery: execute a Recovery attempt for each SUPPRESSED unit in the Group (a Leader is not required).
    • Regroup: If the activated Group contains only one or two units and another Enemy Group with one or two units is on the same or adjacent Stripe, move the activated units in order to merge the two Groups. If the activated Group contains more than two units then COVER instead. Order interpretation: Groups with one or two units are ineffective, so try to keep isolated units together.

    In any case, Enemy units can only be activated once during each Turn.

    3.5.1 Enemy Attack

    To determine which Group/unit will be attacked by the active Enemy, proceed with the following, starting from the units with the lowest CF:

    • Unless specified otherwise, Enemy units will attack the nearest Group. If more than one group is deployed at the same range, roll 1d6 on the [Target Table] on the Mission Sheet and determine the Target Group. The same result will be applied to all the attacks of the Enemy Group in the current turn. If the selected Target Group is HIDDEN, Enemy units will attempt to Spot the Friendly Group instead of attacking it (see 7.4).
    • To determine the unit Target of each Enemy attack, roll again on the [Target Table]; each Enemy attack requires a separate roll (so multiple units in the same Group could be affected).

    An Enemy equipped with a Grenade attacking a Friendly Group at range zero will use the Grenade instead of its standard attack if more than one Friendly unit is present.

    3.5.2 Hopeless Enemy Attacks

    The general idea is that Enemy units will try to avoid an attack if there is no chance to hit the target, combining their forces if possible.

    A little simple math reveals that if the TN of the Target, less the CF of the firing unit, is more than six (the maximum value of a die roll), then the attacking unit has no chance of hitting the Target.

    TN-CF > 6 No chance to hit Example: A Rifle (CF=1) targeting a SMG in a BUILDING (TN=6+2=8) has no chance to hit this target since TN-CF=8-1=7 > 6

    If one or more Enemy units have no chance to hit a target, they will automatically form a Fire Group (5.2), adding their CF together, and will execute a single Attack.

    Example: Two Rifles (CF=1) targeting a SMG in a BUILDING (TN=6+2=8). A single Rifle has no chance to hit this target since TN-CF=8-1=7 > 6. The two rifles will then create a Fire Group, adding their CF together (CF=1+1=2), and will then attempt to hit the target.

    If the combined Fire Group is still unable to attack the Target, select a different Target with a lower TN. If this is not possible, they will enter into Close Combat with a Friendly Group at range zero. If this is also not possible, then execute an "Advance" order.

    3.5.3 Enemy Units in Special Terrain

    • Barbed Wire: When an Enemy unit/Group enters a stripe with an OBSTACLE marker, place the marker adjacent to the unit(s). When activated, Enemy unit(s) adjacent to the OBSTACLE can only attempt the removal of the OBSTACLE (skip the standard activation procedure): roll 1d6, on a result of 3 or greater the OBSTACLE is removed. Tanks automatically remove the OBSTACLE. While adjacent to Barbed Wire, a unit suffers a DRM of +1 to any attack against it.
    • River: Enemy Units on a stripe with a River Terrain Marker will treat any "Cover," "Recovery," and/or "Regroup" order as an "Advance" order. As a guideline, Enemy units will always avoid staying on a River and advance toward Friendly units.

    3.5.4 Overwatch Fire

    Friendly Units marked with an Overwatch marker can be activated during the Enemy Forces Activation phase to perform Overwatch fire. The Overwatch fire is executed as a standard attack with a -1 DRM, unless you've spent one BAP to place the Overwatch marker.

    Overwatch fire is possible at two points during an Enemy Activation:

    • If a new Enemy enters the Map this turn, a Group with the OVERWATCH marker will be able to attack it before their entire activation.
    • (Printed in red in the booklet:) If an Enemy unit moved to a new Stripe or to a Terrain Feature, a Group with the OVERWATCH marker will be able to attack it immediately after the movement, before this Enemy completes its activation. After the Overwatch fire, resume the Enemy activation.

    3.6 Decrease the Game Turn

    After activating the Enemy Forces, move the GAME TURN marker down by one space on the Turn Track. If this action moves the marker past the "1" space, the Mission is over and lost.

    3.7 Recon Points

    Some actions make it possible for your Squad to gain one Recon Point (RP). Keep track of the available RPs using a die on the Squad Roster (place the die or dice in the Recon Points box).

    RP may be spent as follows:

    • Spend one RP to reroll any dice.
    • Spend one RP to apply -1DRM to the enemy entrance tables (like the [Patrol Table] on the Army Sheet). Tables where you can spend one RP are labeled with "(RP: -1DRM)" after the name. If the final result is 0, you may skip the encounter. This represents the ability of your Squad to avoid an unnecessary fight.
    • Spend one RP to gain +2 DRM to any attack roll.
    • Cancel Ambush effect.

    4 Combat Procedure

    Friendly Combat is initiated as a result of a "Fire" or "Flanking Fire" action ("Cover Fire" and "Close Combat" actions are covered later in this section). In addition, a unit with an OVERWATCH marker can initiate Combat against a newly deployed Enemy. Enemy Combat is always initiated as a result of an Enemy Activation. In any case, combat is always directed against a single Group, and each unit can only attack once per game turn.

    4.1 Target Selection

    You may select, as the Target of the Friendly attack, any unit in the chosen Enemy Group. Different units in the activated group may select different Targets, but you must allocate all Friendly units to the Targets before executing the attack roll, unless a Leader is present in the Group.

    To determine the target of an Enemy attack, roll once on the [Target Table] on the Mission Sheet. The same result will be applied to all the attacks by the Enemy Group in the current turn. Unless otherwise specified, the Enemy will attack the nearest Group. If multiple Friendly Groups are available, roll 1d6 on the [Target Table] to determine the Target Group. (Printed in red in the booklet:) If multiple units can be selected after rolling on the [Target Table/Unit Selection], you can select the one that will receive the attack.

    4.2 Attack Roll

    To execute an attack, for each unit in the activated Group roll 1d6 and add the unit's Combat Factors. Each unit attacks individually. If the unit has a zero CF against the Target unit type, this unit cannot attack.

    If the total is greater than or equal to the Target Number (TN) of the Target unit (after applying the relevant modifiers), the attacking unit scores a Hit. Place a SUPPRESSED marker on the Target unit (see the Suppression (4.4) below for more details).

    The attack roll modifiers are described in the Combat Modifiers box on the Squad Roster. The TN of a unit can be modified by the current Terrain and/or by COVER Markers associated with the Target unit (see the Combat Modifiers Box on the Unit Roster for a list of the possible modifiers).

    Attack Example: A Rifle Unit is attacking an enemy SMG adjacent to a TREE. The Target TN is 6 (SMG), modified by a +1 for the Terrain Feature for a total of seven. The attacker rolls 1d6 and gets a 3: he then adds his CF (1) for a total of four. Since four is less than the TN, the attack does not score a hit.

    4.3 Area Effect

    If the firing unit has an AREA(X) attribute (as indicated on the unit's chart on the Army Sheet), you can execute "X" attack rolls to target "X" different targets. If the target group has less than "X" units, excess attacks are not performed.

    Area Effect Example: A unit has an AREA (3) attribute. During combat this unit can execute one attack against three different targets in the same group. If the Target Group includes only two units, the attacking unit will execute only two attack rolls.

    Combat is always directed against a single Group, so an AREA EFFECT cannot be directed to units belonging to different Groups. AREA EFFECT attacks are still considered "single" attacks for activation purposes (a unit may only execute one single attack per turn).

    4.4 Suppression (Damage)

    A unit taking a hit as a result of an attack roll is marked with a SUPPRESSED marker. This represents physical damage, disorganization, and morale drop due to enemy fire.

    A SUPPRESSED unit suffers -1DRM to every roll, with exception of a "Recovery" attempt. A SUPPRESSED unit that suffers a second hit is eliminated from the game.

    4.5 Cover Fire

    Cover Fire represents the combined fire of a Group intended to reduce the effectiveness of an Enemy attack.

    This type of attack targets the area where the Enemy is located, as opposed to individual units.

    A Group executing a Cover Fire makes a standard attack against TN 5, regardless of the type of Enemy unit and/or Terrain (or COVER) modifiers. Any Hit scored is not inflicted on the adversary forces as damage, but instead cancels one Enemy hit on a one-to-one basis. Place a COVER FIRE marker on the Target Group as a reminder. Units with Cover Fire (N) attribute can execute N attacks: roll for each attack independently.

    Cover Fire Example: A Rifle is providing Cover Fire against a group of two Enemy Rifles on a BUILDING. The Target TN is 5 (Terrain and unit TN are never considered). The attacker rolls a 4. He then adds his CF (1) for a total of 5. One COVER FIRE marker is placed on the Enemy Group. Later in the turn, the Enemy Rifles attack and score two hits: one of the hits is canceled by the COVER FIRE marker.

    4.6 Close Combat

    Close Combat represents close-in and hand-to-hand fighting, which was very prevalent in the jungle and thick forest terrain of the Vietnam War. In this type of fighting, units utilized small arms, pistols, bayonets, knives, helmets, fists, feet, and anything else that could be effective at extremely close range. These engagements were typically extremely bloody, oftentimes with one side facing total annihilation.

    You may spend one AP to order one Friendly Group to attack an Enemy Group at range 0. The selected Friendly Group must undergo a Morale Check first (see 1.4.1), with the following DRMs:

    • +1 one BAP spent to initiate the Close Combat
    • +1 Leader present in the Group
    • -1 Target Enemy Group contains a HMG or Flame Thrower

    If the Morale Check is successful, the Group can enter Close Combat. Place the Group adjacent to the Target Group. If the Morale check is failed the Friendly Group is done for the turn.

    To determine the effects of Close Combat, roll 1d6 for both Groups and apply the following modifiers, considering each unit in both Groups:

    ModifierCondition
    -1Unit is suppressed.
    -1Unit equipped with a LMG, HMG, Mortar, FT, Grenade Launcher or Anti-Tank Weapon
    -2Unit is unarmed
    0Unit equipped with a Rifle or Knife
    +1Unit equipped with a SMG, Assault Rifle or Pistol
    +XAttacker spending X grenades (max +2). First round only.
    -XX Cover Fire modifiers (Defender Only). First round only
    +1Engaged group spending one BAP
    +2Attacker spending one RP (first round only).
    +1Group on a BUILDING (Defender only)
    +1Group adjacent to a Terrain Feature (except Building) or inside a Terrain Marker providing TN bonus (first round only; does not apply to Engaged Groups). (Defender only)
    +1Group with more units
    +1Group with more Veteran units
    VariesSpecial Trait or Skill

    The Group with the highest value is considered the winner of the Close Combat, while the other Group is considered the loser.

    If the total of the winner is 2x or more the total of the loser, the loser Group must suffer 2d3 SUPPRESSED results (must be distributed as equally as possible). If the total of the winner is simply higher (less than two times the loser result), the loser Group suffers 1d3 SUPPRESSED Results (must be distributed as equally as possible).

    In the case of a tie, both Groups immediately suffer one SUPPRESSED result, to be allocated to a random unit (unsuppressed units first, then SUPPRESSED units).

    Close Combat Example: A US Army Group, consisting of three units: A.Rifle (Leader), A.Rifle, and A.Rifle (Veteran) attempts to enter Close Combat with a VC Group consisting of two units: Rifle and HMG. The VC Group is on a BUILDING Terrain Marker. The US player must spend 1 AP and then make a Morale Check. The Morale Check DRM is +0 (+1 for Leader present in the Group, -1 for Target Group contains an HMG). The roll is a 4, so the Morale Check succeeds (needs a 3 or higher). Each Group rolls 1d6 for Close Combat. The US Group roll is a 3, with the following modifiers: +3 units equipped with A.Rifle, +1 Group with more units, +1 Group with more Veteran units. The total is 8. The Enemy (VC) roll is a 4, with the following modifiers: -1 unit equipped with HMG, +1 Target Group on BUILDING. Their total is a 4. The US Group defeats the VC Group by a factor 2x, so the VC Group must suffer 2d3 SUPPRESSED. The roll total is a 3, so the VC Group has the Rifle SUPPRESSED and the HMG is destroyed. The two groups are now Engaged (see next section below).

    4.6.1 Engagement and Close Combat End

    Close Combat ends when one of the two Groups is completely removed from the Map Card. If, after a round of Close Combat, both Groups still contain one or more units, the Groups remain adjacent on the Map Card. Those groups are now considered Engaged.

    When activated, an Engaged Group can only execute a Close Combat attack, skipping the initial Morale Check. Spending 1 BAP provides a +1 to the next attack. When a single unit defeats a numerically superior Enemy Group in Close Combat, the Friendly player receives either 1XP (for Campaign Games) or can immediately promote the Friendly unit to Veteran status (player's choice).

    4.6.2 Joining a Close Combat

    An activated Group can join an existing Close Combat only if Friendly units in this Close Combat have not yet been activated. Proceed with the standard Morale Check procedure (see 1.4.1). If the check is successful, the activated Group joins the engaged Group (forming a new Group) and a Close Combat round is now executed to determine the effects of the fight.

    4.6.3 Enemy Units Entering Close Combat

    Enemy units will enter Close Combat as a result of a "Close Combat" order. A Morale Check is not needed for Enemy units.

    Only Enemy Units equipped with a Pistol, Rifle, SMG or Assault Rifles will enter Close Combat, and only if the activated Group has an equal or greater number of units than the Target Group. In any other case, treat a "Close Combat" order as an "Attack" order.

    4.7 Recovery

    Recovery allows a unit to remove a SUPPRESSED marker placed on it. To attempt a Recovery, roll 1d6. If the result is 3 or more, the SUPPRESSED marker is removed. Some units can have a DRM applied to the Recovery roll: Veteran Units always have a +1 DRM. See the unit attributes (in the unit's section of the Army Sheet) or the Mission Sheet for any other DRM to this roll.

    You can normally Recover Units inside a Group only if the Leader is also present in the Group, or by spending one BAP.

    4.8 Special Weapons

    4.8.1 Grenades

    A Grenade can be used only at range zero instead of the standard attack roll, and has an Area (3) attribute.

    Alternatively, a unit may use a Grenade at range zero against a single target to add the Grenade CF to its weapon CF. In this case, the Grenade loses the AREA attribute, but the Grenade CF is increased to 2 CF.

    Example: A Rifle (CF 1) is attacking an Enemy SMG (TN 6) at range zero. The Rifle uses one of its Grenades in the attack and rolls 1d6. The result is 4, modified for the Rifle CF (+1) and the Grenade (+2) for a total of seven (greater than or equal to the Enemy TN of 6). The attack is successful.

    4.8.2 Grenade Launchers

    Point Target attribute: when firing with a Grenade Launcher, you can forgo the AREA attribute to increase the Grenade Launcher to 2 CF.

    4.8.3 Weapon Mount

    Weapons with the MOUNT attribute (like HMGs) require some preparation to fire effectively: for this reason, a group equipped with those weapons cannot Move and Fire (or vice versa) in the same turn.

    4.8.4 Claymore Mines

    The first time an Enemy unit enters a Stripe containing a Claymore Mine marker roll one die: on a result of (1-3) the enemies triggered the mines; remove the Claymore Mine marker and immediately execute an attack against the enemy group with a CF=2 and Area(3). On a result of (4-6) leave the maker [sic] on the map.

    4.9 Fire Support

    Some Missions will provide your squad support fire from field artillery, attack helicopters or tanks. Fire support is always expressed in terms of:

    • Combat Factors (CF)
    • Number of Attacks
    • Type of attack (Area or Point)

    Fire Support always uses the following procedure:

    1. Support Fire Request
    2. Support Fire effect

    Support Fire Request.

    To call for Support Fire the Leader of your Squad must spend 1 AP while stationary (i.e. he cannot move in this turn). Roll one die: on a result of 2 or more the contact is established, otherwise you must spend one additional AP to re-attempt to establish the contact.

    If the contact is established, you can place a "Support Fire" marker, showing the side marked with "1" on a stripe adjacent to the Leader or at range of 2 from him and in LOS. If the type of attack is "Point" place the marker near a single enemy group, always in the 2 stripes range (area attacks will affect the whole stripe).

    Support Fire Effect

    At the end of the Group Creation Phase perform the following actions in this order:

    • If there is a Support Fire marker showing the side marked with "F" roll one die: on a result of 2 or more the Support Fire is executed depending on the type of attack. Area Support Fire: attack every non-hidden unit (including friendly forces) in the Stripe where the Support Fire marker is located, using the CF specified by the Mission Rules for the Support Fire. Point Support Fire: attack every non-hidden unit in the Enemy Group where the Support Fire marker is located, using the CF specified by the Mission Rules for the Support Fire.
    • Repeat the attack for the number of available attacks. Remove the Support Fire marker after the attacks.
    • If there is a Support Fire marker showing the side marked with "1" flip the marker to the side marked with "F".

    Special Area effect.

    Regardless the result of a support fire attack, units in the stripe where the attack was performed won't be able to be activated in the current turn, nor enemy units are allowed to enter the attacked stripe.

    5 Leadership

    One unit in your Squad must be designated as the Leader of the Squad. Consult the units section of the Army Sheet ("Attributes" column) to see which units can be designated as Leaders.

    If during combat the Leader is eliminated, designate one of the other units as the new Leader (it may be helpful to give one unit an unofficial "Assistant Leader" designation on your roster, to keep track of the unit you wish to take command if the Leader is destroyed). Any unit can be selected at this stage but at the end of the mission this temporary leadership is dropped if the unit cannot be designated as a Leader on the Army Sheet.

    5.1 Leadership Effects

    The presence of a Leader inside a Group allows the execution of a Recovery action by spending an AP (without the need to spend a BAP).

    In addition, the Leader can direct the Attack of a single unit in its own Group, providing a +1 DRM to the unit attack. This DRM applies to each roll for a weapon with the AREA attribute (for this reason a Leader is especially useful in directing support weapons). A Leader directing another unit forfeits its own attack roll.

    5.2 Fire Group

    A Leader can coordinate the units in its own Group or a Group on the same stripe, combining their CF against a single Target. In such a case, add the CF of all the attacking units into a single DRM. A Leader coordinating an attack forfeits its own attack roll.

    Regardless of the DRM, a natural roll of 1 for a Fire Group results in a failed attack.

    6 Helicopter Operations

    Vertical takeoff and landing capabilities allowed soldiers to rush to the jungles, valleys, and hilltops. The copters were equally adept at extracting troops when the operation was completed. Their ability to evacuate the wounded and swiftly convey them to a medical facility was the difference between life and death for tens of thousands of casualties.

    Some missions will require your units to enter or leave the map by helicopter. The following rules are used during those Missions to manage the airborne movement.

    6.1 Landing Zones

    Landing Zones (LZ) markers are placed on the map following the Mission rules: each LZ marker represents a possible area where the helicopters can drop and/or embark the troops.

    6.2 Assigning units to helicopter

    If your units must enter the game by helicopter, at the beginning of the mission you must assign your units to the available helicopters: each helicopter can transport a max of five units. Place the units in the corresponding Helicopter Box of the Play Aid sheet.

    6.3 Landing

    After spending 1 AP you can attempt landing one of your helicopters; the procedure to perform the landing is the following:

    • Roll on the [Landing Zone Table] to determine the LZ assigned to the active helicopter.
    • Roll on the [Landing Table] to check if the landing is successful.

    Possible results on the Landing Table include:

    • Successful Landing: the units are moved from the active helicopter box to the map Stripe corresponding to the selected LZ.
    • Enemy Fire: the units are moved from the active helicopter box to the map, but one or more random units suffers a Suppression depending on the table text.
    • Delayed Landing: the landing is delayed one turn. In the next turn the units will be moved to the map to the selected LZ (no need to roll again), but you still must pay 1 AP for this second attempt.
    • Heavy fire: landing is aborted. You need to start a new landing attempt in the following turns (determining the new LZ).

    6.4 Embarking

    In order to embark, a group must be on a Stripe containing a LZ. Spend 1 AP and you can attempt to embark a group on one of your helicopters; roll one die to determine the number of units that were able to embark in this activation: place those units adjacent to the LZ as a reminder. Remove the units from the map once you've placed the number of units adjacent to the LZ (or if there are no other units to embark).

    7 Hidden Units

    Hiding in this game represents the ability of a unit to leverage the terrain to avoid being spotted (and then attacked) by Enemy forces.

    7.1 Gaining the Hidden Status

    Friendly units can gain HIDDEN status by selecting the "Hide" action. Enemy Units will become HIDDEN only as a result of an Enemy Activation.

    Place a HIDDEN marker on the unit(s) to indicate its new status.

    No unit can become HIDDEN if in the same game turn the unit executed any form of combat. You can, for example, Move and then Hide, but never Fire then Hide.

    7.2 Effects of Being Hidden

    A HIDDEN Unit cannot be selected as a Target for any type of attack. The only action possible against a HIDDEN unit is a Spotting attempt (see 7.4).

    7.3 Losing the Hidden Status

    A HIDDEN marker is automatically removed from a unit in the following cases:

    • The unit moves (exception: VC units, see below)
    • The unit fires
    • The unit is spotted (see next section)

    VC units don't automatically lose their HIDDEN marker when moving. For VC units (only) roll one die after the movement and remove the HIDDEN marker only on a result of 5 or more.

    7.4 Spotting

    A Friendly unit can attempt to spot a HIDDEN Enemy Group in Line of Sight with the "Spot" action. An Enemy unit will attempt to spot a HIDDEN target only as a result of their Activation.

    To Spot a HIDDEN Target, the acting unit must roll 1d6 and get a result of 5 or more. If successful, remove the HIDDEN marker from the target. You can spend 1 BAP to get a +2 DRM on the Spot Roll.

    8 Night Rules

    When playing a "Night" Mission, apply the following rules to the standard game sequence:

    • Each turn, the first time a unit or Group executes an attack, roll on the [Night Range Table] (found on the Unit Roster Card) to determine visibility for the current turn. This roll will determine the maximum range for an attack on the current turn. It is possible that the unit or Group that triggered the night roll won't be able to attack due to the range restrictions. In such a case the activation is lost (this represents units firing in the dark).
    • Some events (ex. Flares!) can provide a DRM to this roll.
    • Spotting (7.4) is only possible at Range 1 or less.

    9 Tunnel Rats Missions

    Some missions represent combat actions inside the VC/NVA tunnel systems: for these missions the following special rules apply:

    • Instead of the standard map based on six stripes the special tunnel map B is used.
    • Only two units can participate in the mission.
    • The unit equipment is restricted (see below)
    • There is no Enemy Presence Check Phase
    • EM are always revealed once a Group enters its Box.

    9.1 Tunnel Map

    The tunnel map is composed of eight numbered boxes, representing different areas of the tunnel (rooms, corridors, passage sections...). Each box is connected to at least one other box, creating a simple network of boxes.

    EM are placed on each box at the beginning of the mission, following the mission instructions, and will determine the type of area encountered by your units and the possible threats.

    At the beginning of a mission, units are always placed adjacent to one of the boxes, representing the tunnel entrance, as instructed by the Mission instructions.

    9.1.1 Movement

    In order to move in the tunnel complex, you must spend

    • 2AP to enter a new section of the tunnel (i.e., a box never visited in this mission). This also applies to the tunnel entrance.
    • 1AP to enter a box already visited.

    Your units can only move to a box connected to the one currently occupied (or to Box #1 if they are still located in the tunnel entrance).

    (Printed in red in the booklet:) If only one unit remains on the map, you can spend 1 AP to place another soldier on the entrance box.

    9.1.2 Range

    Enemy units are placed at Range 0 or in Close Combat by the mission instructions. When at Range 0, it's possible to execute a Fire action against an Enemy; when at Close Combat range, you can only initiate a Close Combat (if you have enough AP).

    9.2 March Line

    Due to the narrow spaces of the tunnel complex, unless specified otherwise, only the first unit in the line is considered "active" and can perform the actions defined below (9.4), including combat. Place your units in a stack with the unit on the top of the stack representing the first one in the march line: the order of the soldiers in the line will then determine the sequence of their engagement.

    9.3 Equipment

    Inside the tunnels soldiers were normally equipped with a flashlight, a gun and a knife (also used to find and disarm traps), in addition to a gas mask in some cases. The rules in this section reflect this limitation.

    Units selected for a Tunnel mission are always equipped with a Pistol. No other type of weapon can be assigned to those units. Grenades cannot be used in Tunnel missions.

    9.4 Actions Available

    During a Tunnel Mission, only the following actions are allowed:

    • Move
    • Fire
    • Close Combat
    • Recovery
    • Reconnaissance Move (costs 3 AP to enter a new section of the tunnel)

    9.5 Combat

    Due to the narrow nature of the tunnel complex, most of the combat will be close combat.

    Only the first unit in your march line and the first enemy (randomly selected) are engaged in close combat: when one unit is eliminated, replace it with the next one in the next combat turns, if available. Close combat is initiated spending 1 AP (or 1 BAP) without the need of a Morale Check.

    Larger areas in the tunnels can have a COMBAT=N attribute in their description: in those areas (only) up to a maximum of N units can participate in combat.

    9.6 Enemy Activation

    When at Close Combat Range, Enemy units will immediately initiate a Close Combat. When at range 0 roll on the [Enemy Activation Table] to determine the Enemy Actions; enemies with a Knife will always enter Close Combat.

    10 Hue Special Rules

    Missions played on the Hue Map (as per Mission instructions) include some special terrain features and require a special check when entering a new stripe (Exposed Movement). The rules in this section only apply to Missions played on the Hue Map.

    10.1 City Terrain

    New terrain features

    • Town. TN+2 to all units on the stripe (the crosshair icon is a reminder of the Exposed Movement rules applying to this terrain)
    • Multi-Story Building. These markers represent buildings with an additional floor above the ground level.
    • First Floor. This marker is used to determine if a group is located on the ground floor or on the first floor of a multi-story building.
    • Bridge. +1 TN to units

    Multi-story buildings

    Standard buildings in Rifles in the NAM are single-story structures. Multi-Story Building markers are structures with one additional level above the ground floor.

    A group entering a multi-story building is always considered on the ground floor.

    Spending one AP a group can move from the ground floor to the first floor. Place a First Floor marker on top of the multi-story building marker and put the units on top of the First Floor marker.

    Units firing from the First Floor at a target on the Ground Floor receive a +1 DRM.

    Spending one AP a group can move from the first floor to the ground floor.

    On a multi-story building it is possible to have units on both the ground and the first floor: those units are at range 0. Apply a +1 TN (instead of the standard +2) for units firing at a target in the same multi-story building.

    Enemy Movement

    Enemy units will give priority to the following terrain features:

    • Multi-story building
    • Building
    • Other features providing a positive TN.

    When entering a multi-story building roll a die: on a result of 4 or more the enemy will move to the First Floor.

    Enemies on the ground floor of a multi-story building with a Cover or Attack order will move to the First Floor as part of their activation.

    Enemies can attack in Close Combat a friendly unit on the First Floor only if they are activated in the same Stripe.

    10.2 Exposed Movement

    Every time a Group moves to a different Stripe on the Hue map you must roll on the Exposed Movement Table before revealing any EM. You can spend one Recon Point to avoid this check.

    Note. The Exposed Movement Table requires a roll of a D66: for such a roll you must use a combination of two six-sided dice distinguishable from each other by colour; the first die represents the tens digit, and the second die the ones digit. For example, a roll of 2 followed by a roll of 5 is 25.

    11 Civilians

    Some missions require the placement of Civilians on the Map (use an NPC marker to represent them). Civilians normally represent innocent local people but, in some cases, they could represent disguised Viet Cong soldiers.

    Every time a friendly group moves on a Stripe containing a Civilian marker roll one die and consult the [Civilians Activation Table] to determine their response to your unit's movement (if any).

    A unit in the same stripe with a Civilian marker can attempt to interrogate the people represented by the marker by spending 1 AP: roll one die and consult the [Civilians Interrogation Table] to determine the result of this check.

    12 Mission End

    A Mission is successfully completed when you achieve the Mission Objectives specified on the Mission Sheet. Alternatively, you can abort the current mission if all of your units are on Stripe #6 and you spend 1 AP in the Friendly Unit Activation Phase to withdraw and lose the mission.

    A mission is Lost when all the Friendly units have been eliminated or when the GAME TURN marker moves past the "1" space in the Turn Track.

    13 Campaign Game

    The Campaign rules make it possible to play a complete Tour of Duty, one year of service in Vietnam: each campaign game turn, representing one week, you will determine the assignment for your unit and/or the events occurring. The experience of your squad will improve but also their fatigue.

    13.1 Starting a New Campaign

    At the beginning of the Campaign, select your Army using the standard rules (see 2.2). This first Squad represents the initial team that will act during the rest of the campaign.

    Set the Fatigue level to "0" on the unit roster.

    On the Campaign Log you start your Tour of Duty on June the 5th 1967.

    13.2 Fatigue

    Fatigue represents the overall stress and physical exhaustion of your soldiers. In game terms Fatigue is represented by a value from 0 to 4: the Fatigue Track is used to keep track of the current Fatigue Level (FL). Fatigue is set to zero at the beginning of a new campaign: missions and other duties will increase your Fatigue while quiet periods will enable your squad to slowly recover.

    Fatigue effect

    • With a Fatigue of 2 or more, BAPs are treated as standard AP.
    • With a Fatigue of 3 or more, Morale checks suffer a -1 DRM.
    • With a Fatigue of 4, you roll only two Activation Dice in the Friendly Activation Phase.

    Fatigue also affects the recovery of your soldiers and Mission Assignments (see the following chapters).

    13.3 Campaign Turn

    Each campaign game turn represents one week. Each turn you must roll on one of the Campaign Tables to determine the assignment and/or events happening to your Squad.

    The extended campaign turn sequence is the following:

    • Determine Squad Assignment
    • Reinforcements Request
    • If a Mission has been assigned to your squad:
      • Execute Mission (using the standard rules)
      • Perform an End Mission Briefing
    • Fatigue Check
    • Advance calendar to the next week

    13.4 Squad Assignment

    In the Campaign Log, look in the "Table" column of the row corresponding to the current date (June 5th, 1967, if you've just started the campaign). In this column you will find a letter: roll 2d6 and consult the corresponding Campaign Table to determine the assignment fodr [sic] your squad.

    Possible entries in the Campaign Tables include:

    • New mission assignment: an entry starting with MISSION represents a new mission assigned to your squad.
    • Event: these can represent secondary missions, HQ duties and/or random events. Follow the table instructions.

    Write a summary of the assignment on the "Assignment" column of the Campaign Log.

    Every MISSION in the Campaign Table can only happen once per month. If the same Mission is generated again during a month, roll the dice again to generate a different event.

    Special rules for Fatigue Level of 4.

    Tunnel Rats missions are never assigned to a squad with Fatigue 4 (re-roll for a new assignment in this case).

    If you are at Fatigue 4 and a Mission is assigned to your Squad, roll another d6:

    • On a result of (1-4) the mission is assigned to another Unit, and you instead recover 1 Fatigue.
    • On a result of (5-6) you must proceed with the mission.

    13.5 Reinforcements Request

    If the Build Points total of the Units in your Squad (excluding Wounded units) is less than the maximum value of BP for your Army, you can request reinforcements from HQ. Roll one die and consult the following table:

    • (1) No reinforcements available
    • (2-5) One BP available to reinforce your Squad
    • (6) 1d3 BP available to reinforce your Squad.

    BP can be used to acquire new units or can be saved for later use. In any case, the Build Points total for your Squad (excluding Wounded units) plus the new BPs cannot be greater than the maximum BP value for your Army.

    New units are always considered Green unless you spend double the cost in BP to acquire a unit with Line morale.

    13.6 New Campaign Mission

    If you've been assigned a new Mission proceed with the squad preparation as follows.

    Wounded units cannot take part in the next Mission.

    Roll one additional die: on a result of (2-6), you gain one BP to spend on equipment only. This BP cannot be spent to get additional units nor can it be saved for a later use.

    Select the units for the next Mission; the total BP of the selected units must be lower or equal to the Army BP value.

    13.7 End Mission Briefing

    For each Wounded soldier roll one die: if the value is higher than the current Fatigue Level the unit recovers: remove the "Wounded" note in the "Status" section of the Unit Roster.

    Roll 1d6 for each unit eliminated in the current Mission and consult the following table. Apply a -1 modifier if the mission was lost.

    • (1) The soldier is dead: remove its name from the Unit Roster (and send a letter to his family of course)
    • (2-5) The soldier is Wounded and needs medical treatment. Write "Wounded" in the "Status" column on the Unit Roster as a reminder that this soldier won't be able to participate in the next Mission.
    • (6) The soldier was only lightly wounded and is still able to fight.

    13.7.1 Experience Points

    Green Units are immediately promoted to Line (Morale=3).

    Roll 1d6 and add the result to your Squad's Experience Points (XP). Keep track of unused XP on the Unit Roster.

    Halve the XP (rounding down) if you've lost or aborted the Mission.

    The XP can be used to improve your team as follows:

    • 2XP - promote a soldier to Veteran.
    • 3XP – gain one of the skills listed in the following Skills Table (update the Squad roster accordingly). A Unit can gain a second skill for 6XP only if the Unit is a Veteran. The third skill will cost 9 XP: no Unit can have more than three skills.

    Green Units just promoted to Line cannot receive XP on their first Mission.

    Skills Table

    Skill NameDescription
    SharpshooterCF+1 when firing at Range 1 or 2
    Camouflage+1 to the unit TN
    Quick ShotIf the Attack Roll is a natural 5 or 6 the unit can make a second attack with CF-1
    Close Combat Expert+1 DRM in Close Combat
    Heroic moraleAutomatically remove a SUPPRESSED marker from the unit when it is activated.
    Grenadier+1 DRM when using a Grenade
    AthleticYou can recover from a SUPPRESSED status and fire in the same turn.
    Bull StrengthAdd a +2 DRM to the End Mission Table (13.7) roll. A natural result of "1" is not modified.
    Battlefield control(Leader Only) The Leader can save one unspent AP or BAP to be used on the next turn.
    HunterOnce per turn may execute a Move action without spending one AP.
    Local ContactsStart Mission with one RP.
    Spotter+2 to spot a HIDDEN target.
    Tunnel Expert+2 when attempting to disable a trap while on a Tunnel Mission
    Booby Trap expertYou can reroll the die when attempting to remove a Booby trap

    13.8 Fatigue Check

    If in the current turn you've been assigned to a Mission, your Fatigue increases by one.

    If you were not assigned to a Mission and your Fatigue was not changed by the event, you can roll one die: if the value is LESS than the current Fatigue Level you decrease it by one.

    14 Advanced Rules

    These rules have been designed to add some details to the game with a small price in increased complexity. Each rule can be added individually to the game.

    14.1 Mortars

    Mortars cannot fire:

    • when adjacent to a Building or Tree terrain feature
    • Inside a Jungle base terrain

    In order to fire at a target at a range of three or more, you need to spend 2 AP (this represents the need to coordinate the attack with a forward observer).

    14.2 Grenade Launchers

    After firing, a Grenade Launcher is considered unloaded. Rotate the unit as a reminder. Units with unloaded weapons cannot fire.

    Spending 1 AP you can reload all the unloaded units in your squad.