Rhin et Danube (1944)
Rhin et Danube (1944) Rulebook
Table of Contents
Table of Contents
1 - OVERVIEW
1.1 - TERRAIN
A hexagonal grid is superimposed on the map to regulate units' Movement (see 3) and Combat (see 6). The effects of the different types of terrain on movement and combat are detailed on the Terrain Effects Table (see page 16).
1.2 - SCALES
One game turn represents two days of real time. A hexagon on the map corresponds to approximately 4 km. The counter units represent battalions, regiments and German kampfgruppen.
1.3 - UNITS
Each unit has the following information on its counter:
- Combat strength and quality rating.
- Unit type (Mechanised, motorised or Leg) represented by a NATO symbol and size (see 5). All units with the symbol shown in the source key (the Tanks icon under "Mechanised/motorised movement" below) are mechanised.
- Identification (see appendix).
- An armoured bonus, identified by an asterisk.
- A Heavy Machine Gun capacity, identified by a dot.
- A special characteristic, identified by the quality letter in grey.
- Movement allowance. It is not notated on the counter and is 6 MP for the Leg units (in blue) and 8 MP for the mechanised or motorised units (in red). See below.
The majority of combat units have two combat steps. After the first loss, they are turned over to their reduced side. For units with only one combat step, they are destroyed after the first loss.
Counters description (the source diagram labels, in order):
- Identification.
- Type and size.
- Unit's colour code.
- Historical entry turn.
- Combat strength.
- Armoured bonus.
- Quality.
- Special capacity.
- Machine Gun Bonus.
- Indicates that the unit has suffered a loss.
- Verso: identification and colour code. XXX: corps. XXXX: Army.
- Number of supports possible during the turn.
- Range of engagement.
- Indicates that all the supports have been used.
- Stronghold (Defensive work).
Leg unit movement (6 MP):
- Infantry.
- Mountain infantry.
- Paratrooper infantry.
- Engineers.
- Machine Gun (MG).
Mechanised/motorised movement (8 MP):
- Tanks.
- Assault cannons (Sturmgeschütz).
- Tank hunters.
- Mechanised Recon.
- Mechanised infantry.
- Motorisation marker.
Armour Units: the source key marks the armour-unit icons with a bracket labelled "Armour Units" (see 4.4 and 6.2.3).
Special unit notes:
- Engineer units: these units provide a combat bonus in a city or village of one column.
- French Combat Command: these units have automatically the bonus Infantry + Tanks (see 6.2.4).
- 654.sPzJg: When this unit is in combat against an Armour unit, add + or - 1 to the combat die.
- Chocs and Commandos: these units provide a combat bonus against a Defensive work, in a city or village of one column and may launch a raid (see 12.3.1).
- 30.SS Division: this unit's combativity is variable. At the beginning of each turn, roll a die. When testing its quality during the turn, add the following DRM: 1-2 = -1; 3-4 = 0; 5-6 = +1. Historical note: this division had discipline problems since its creation. At the end of August, two Ukrainian battalions had deserted and joined the resistance.
- FFI: these units may take a bridge (see 12.3.2).
- Errata: the counters Recon, Chocs and Tanks units should have a quality letter in grey.
1.4 - HEADQUARTERS
HQ (marked QG on the counter) are used to allocate support (aviation and artillery) to the combats. They contain the following information:
- Maximum number of supports to allocate to offensive and/or defensive combats during the turn.
- Range at which these supports can participate in the combat.
- Corps HQ may support their own troops and Army troops.
- Army HQ may support all troops.
- Their movement capacity is motorised.
A HQ attacked by an enemy unit while it is alone in a hex is removed from the game. It returns as a reinforcement on the next turn (see 13.2). Place it on the turn track.
- An HQ does not have a ZoC.
1.5 - SPECIAL CHARACTERISTICS
- Mountain troops, Armour and Recon units: these units are able to infiltrate enemy ZoC (see 4.4).
2 - SEQUENCE OF PLAY
Alsace 1944 is played in 8 turns. Each game turn contains several phases which are described below.
2.1 - GAME TURN
A - French supply Phase
The French player checks the supply lines [LoS] (see 8) for all his units.
B - French Movement Phase
The French player moves all or part of his units, respecting the Rules of Movement (see 3), Stacking (see 5), and the Zones of Control (see 4).
C - French Combat Phase
The French player has his able units combat, respecting the combat rules (see 6), in the order he chooses.
D - German supply Phase
The German player checks the supply lines [LoS] (see 8) for all his units.
E - German Movement Phase
Same as phase B but for the German player.
F - German Combat Phase
Same as phase C but for the German player.
G - End of the turn
The turn marker is moved forward one space on the turn counter.
If it is the last turn of the scenario, check the victory conditions.
3 - MOVEMENT
3.1 - OVERVIEW
During movement, a unit can move all or part of its movement allowance by spending the movement points (MP) required for each type of terrain moved through.
All Leg units have a movement allowance of 6 MP; the motorised and mechanised units have a movement allowance of 8 MP.
A unit is not required to expend all of its MP during its movement action, but if it does not, the remaining MP are lost for this turn.
3.2 - TERRAIN EFFECTS
The effects of terrain on movement and combat are given on the Terrain Effects Table (see page 16).
- Roads: for mechanised and motorised units, the cost in MP for use of a road or railway only applies if the unit is alone in the hex. or stacked with a Leg unit. If a mechanised or motorised unit is stacked with another mechanised or motorised unit, or if a mechanised or motorised unit crosses a mechanised or motorised unit already on the road, it will then pay a +1 MP malus. Leg units always benefit from road movement.
- Note: it is forbidden to go from a Mountainous hex. to another hex without a road. For example a Tank unit cannot go directly from hex. 1401 to hex. 1501 because there is no road.
- Bridges: They are located wherever a road crosses a river or canal. This bridge cancels the cost in MP of a river crossing, but not certain penalties linked to combat (see Terrain Table). The regular Zones of Control apply (see 4.1).
- Example: a bridge is located between hex. 1409 and 1509. A unit that crosses this bridge will pay only the movement indicated for the road or terrain present in the hex. and not for the river. However, the combat modifier still applies.
- Bridges over the Rhine: They follow special rules and have an influence on Supply (8.2) and German reinforcements (12.2.3).
Example (the German unit AufKL.1000 disengages from the ZoC of the French unit Tabors at the cost of 2 MP (1) and enters 1509 (1 MP). Another motorised/mechanised unit prevents it from benefiting from the road, so it spends +1 MP (2). It then progresses on the road in 1508 at the cost of 1 MP, where the unit on foot does not prevent it from benefiting from the road (3). In 1607, it will have spent 6 MP (4).)
4 - ZONES OF CONTROL
4.1 - OVERVIEW
All combat units exert a Zone of Control (ZoC) in their own hex. and over the six adjacent hexes except through the Rhine.
Exception: Leg units with a combat value of 1 have a ZoC only in their own hex.
Example of movement.
A unit's ZoC influences the movement and combat of other units.
4.2 - EFFECTS OF ZOC
4.2.1 - Overview
-
A unit that enters an enemy ZoC must stop its movement (exception 4.4).
-
A unit that begins its movement in an enemy ZoC may leave this ZoC by spending an additional +2 MP.
-
A unit cannot move directly from one enemy ZoC to another enemy ZoC exerted by the same unit (exception: 4.4).
-
The presence of a friendly unit in an enemy ZoC nullifies it for retreat (see 6.5.1) supply (see 8.1) and concentric attack (see 6.2.7) but not for movement.
Note: the presence of a friendly ZoC does not negate an enemy ZoC.
-
A unit that advances after combat does not take into account the enemy ZoC it crosses (see 6.6.2).
4.3 - ZOC AND COMBAT
- Combat is not mandatory for a unit that ends its movement in an enemy ZoC.
- A unit or stack of units that retreats into a ZoC as a result of combat loses one combat step (for the whole stack) for each enemy ZoC it crosses (see 6.6.1) unless a friendly unit is present in the hex.
4.4 - MOUNTAIN TROOPS, ARMOUR UNITS AND RECON
Mountain, Armour and Recon units are able to infiltrate and therefore pass from one enemy ZoC to another, exerted by the same unit. The only cost is the +2 MP to exit each ZoC (in addition to the terrain). This infiltration may only be performed against enemy Leg units and:
- in difficult, difficult + woods and Mountainous terrain for Mountain troops;
- in clear, difficult, difficult + woods or on road for other types.
Example of infiltration movement: unit 469/269 moves into French unit BNA's ZoC. From 1 to 2, it spends +2 MP to exit the ZoC in 903 and 3 MP for mountainous terrain. Total = 5 MP.
5 - STACKING
5.1 - OVERVIEW
The size of the units is as follows:
- X: brigade
- III: regiment
- KG: Kampfgruppe
- II: battalion
The stacking limit takes effect at the end of each movement and combat phase.
However, during each movement phase, friendly units may exceed the stacking limit without consequence (exception: mechanised units on the road, see 3.2).
Units exceeding the stacking limit are eliminated (as the owning player chooses). The various markers and the HQ do not count toward the stacking limit.
Source numbering note: the source prints "5.1" twice (for this overview and for French Stacking). Both are reproduced as printed.
5.1 - FRENCH STACKING
The French may stack in the same hex up to three regiments or brigades plus (one battalion) or two regiments or brigades plus (two battalions).
5.2 - GERMAN STACKING
The German may stack in the same hex up to three regiments or KG plus (one battalion) or two regiments or KG plus (two battalions).
Exception: see 10.1, 10.2 and 12.1.3.
6 - COMBAT
In Alsace 1944, the combat takes place between adjacent units. The units that attack are called the "Attackers" and the units in the targeted hex(es) are called the "Defenders".
6.1 - OVERVIEW
- A unit may attack any hex containing an adjacent enemy unit.
- An enemy unit can be attacked by any adjacent friendly units.
- Multiple attacks: All enemy units in the same hex must be attacked together, and they must all participate in their defence; their defence value is the sum of their combat points.
Attacking units that are in the same hex (that is, in the same stack) can attack different enemy hexes. Each attack is resolved separately. However, the combat value of a unit cannot be divided among several combats.
6.2 - COMBAT MODIFIERS
The modifiers are as follows and are applied in the order indicated. All of these modifiers are cumulative but there may only be one modifier of each type in the same combat (exception: artillery).
6.2.1 - Defender's terrain penalty
The terrain in the defender's hex provides:
- column shifts;
- the attack value of each unit is divided by two if attacking across a river (rounded up).
Example: two units of combat value 5 stacked together will have a final combat value of 6 (5/2 = 2,5 rounded up = 3, multiplied by 2).
These modifiers are cumulative.
Example: a unit attacking a wood behind a river will have its combat value /2 and a shift of -1 column.
Always take the most favourable penalty for the defence.
Example: if one unit attacks across a river and the other does not, divide by 2 the one which attacks across. If there is a bridge, the penalty is -1 column.
When a village and another type of terrain are present in the same hex, take the more favourable in defence.
6.2.2 - Divisional integrity bonus
-
If all the regiments of the same infantry division attack the same adversary, the attack receives a bonus of a +1 column shift to the right. Any additional battalions do not count toward divisional integrity. Only the following units are eligible for this bonus:
- Germans: divisions 338, 189, 269, 159, 198 and 30. SS.
- French: divisions 9 DIC, 2 DIM et 1 DFL.
-
If all the regiments or Combat Command of the same armoured division or Panzer Brigade attack the same adversary and the defender is in clear terrain, the attack receives a bonus of a +2 column shift to the right. Only the following units are eligible for this bonus:
- Germans: 106.Panzer Brigade.
- French: 1 DB and 5 DB.
Note: if one of the regiments is destroyed, the unit cannot benefit from this bonus.
6.2.3 - Armour vs Infantry
If an armoured unit or a Recon unit fights a Leg unit alone in clear terrain, then it receives a +1 column shift in attack and in defence.
6.2.4 - Infantry + Armour
If an infantry unit (of any type: Leg, motorised or mechanised) is stacked with an Armour unit or Recon unit, it receives a +1 column shift in attack and in defence.
Reminder: French Combat Commands automatically have this capacity.
Exception: the bonus given to Recon unit is valid only if the enemy has no Armour unit engaged in this combat.
Source numbering note: the source prints "6.2.4" for both this section and the Armoured bonus below; both are reproduced as printed.
6.2.4 - Armoured bonus
Armour units that have an armoured bonus (indicated by an asterisk) benefit from a +1 column shift in attack or in defence, if enemy Armour units participate in the combat and none of them has an armoured bonus.
Game note: we advise the attacker to roll two dice of different colours for the combat in order to speed up the process.
6.2.5 - Engineer and commandos
If an engineer or commando unit participates in a combat against a Defensive work (see 10) or against or in a city or village it receives a +1 column shift (see 1.5).
6.2.5 - MG units
Gives a +1 column shift in defence against Leg units only.
Source numbering note: the source prints "6.2.5" for both this section and the Engineer and commandos section above; reproduced as printed.
6.2.7 - Artillery support
Each artillery point spent gives a +1 column shift in the combat in which it participates. A maximum of 2 points may be spent per combat.
Note: the attacking player allocates his support first, followed by the defender.
Source numbering note: section 11 refers to artillery points as "see 6.2.6"; the source prints this section as 6.2.7.
6.2.8 - Concentric attack
If a defender's unit is completely surrounded by attacker's units and their ZoCs, the attacker receives a +1 column bonus.
6.2.9 - Quality
A unit's quality is used to calculate its probable performance in a given combat. This value ranges from A to D and is used by the attacker and the defender during each combat. If several units of varying qualities participate in a combat, always choose the one with the best quality.
Each player rolls 1d6 on the Quality Table and uses the result to shift the column to the right or left on the CRT.
A negative number obtained by the defender equals a corresponding number of additional columns for the attacker and vice versa.
Design note: this table amounts to testing a unit's capacity to organise its attack or its defence, based on its command and its training, and its ability to deal with the unexpected (bad coordination, lack of ammunition, impetus, etc.). The higher the quality, the less likely the unit is to undergo a negative result and vice versa.
Source numbering note: there is no section 6.3 in the source; the Game note above and the combat resolution section follow directly.
6.4 - COMBAT RESOLUTION
Combat takes place as follows: both the attacker and the defender add up their combat strength points. Find the ratio between the attacker's and defender's sums to obtain a basic force ratio on the CRT. This ratio is always rounded in the defender's favour.
Example: if 13 strength points attack 7, the strength ratio is 1.86/1, rounded down to 1.5/1 or 3/2. If 15 points attack 4, the strength ratio is 3.75/1, rounded down to 3/1.
Column shifts are then applied to obtain the final strength ratio column.
If this final strength ratio is above 8/1, then the attacker will have a +1 Die Roll Modifier.
Note: the final strength ratio cannot be less than 1/3 or greater than 8/1 after all the column shifts (bonus or penalty) have been applied. Any modifiers leading to these limits being exceeded are not taken into account except for the +1 DRM.
The attacker consults the appropriate column on the Combat Results Table (CRT) then rolls 1d6 to obtain the final combat result.
Example: the final strength ratio is 10/1, the attacker will roll a die on the 8/1 column with a +1 DRM.
6.5 - COMBAT RESULTS
Combat results are given in the form of a letter R and/or numbers that can affect the attacker as well as the defender. The letter R indicates a mandatory retreat. The numbers indicate the number of strength steps that force must lose and/or the additional number of hexes to retreat.
- The owning player apportions his combat loss(es) as he chooses among the stack and the number of retreat hexes, always beginning with the mandatory retreat, losses, and then optional retreats. The defender apportions his losses and retreats, if any, then the attacker does the same.
- Results in bold on the CRT indicate that the final requirement to be filled for the combat result is chosen by the attacker. The defender, however, chooses the unit or the stack that undergoes the loss or the hex. of retreat.
- If the defender can or chooses to remain in place and lose strength steps, the attacker must take at least one combat loss before retreating if the result requires so (a result with at least two requirements: R2, R1 or 2). In the case of only one requirement, the attacker retreats (R) or chooses to retreat or lose a step (1). In any case, if the defender retreats (by choice or necessity), the attacker may also choose to retreat.
- Preferably, the first loss is taken by the most important unit in terms of steps. In the case of a tie, the owning player chooses.
- The first loss is not necessarily taken by the unit whose quality was chosen for the combat.
- However, if there are Armour units present on both sides, the first loss must be taken by an Armour unit that participated in the combat.
- Exception: this loss is not necessarily taken by the unit if it has an armoured bonus.
- For a unit of quality A or B, the mandatory retreat can be converted to a loss. In this case, if units of lesser quality are stacked with this unit, they do not retreat either.
- For a unit of any quality in a city or village, the mandatory retreat may be changed to a loss.
Example of a valid concentric attack.
6.6 - RETREAT AND ADVANCE
6.6.1 - Retreat
A unit or stack of units that retreats cannot enter a hex occupied by enemy units. It also cannot retreat into a hex that is impassable to it.
Units must retreat as much as possible according to the following order of priorities:
- toward a hex. outside of enemy ZoC;
- in the general direction of a friendly map edge (west for the French and east and North for the German);
- toward the hex. farthest from an enemy unit.
- A unit or stack may retreat into an enemy ZoC, losing one combat step for the entire stack per hex. of enemy ZoC moved through, unless this hex. is occupied by a friendly unit.
- Units in a retreating stack may retreat into different hexes as long as they all retreat the same number of hexes.
- A unit that must retreat into a hex. with impassable terrain or a hex. occupied by enemy units is eliminated.
- A unit that must retreat in Switzerland is eliminated.
- A unit which must retreat off the map returns the following turn to the hex. from which it exited or to an adjacent hex. If that hex is occupied by an enemy unit, it returns to a different but adjacent hex, free of enemy units.
Note: If a unit retreats in violation of the rules of stacking, it or a unit in the stack will be eliminated (see 5).
6.6.2 - Advance after combat
-
When a unit or stack of units retreats or is eliminated, it leaves the hex. that it had occupied vacant, as well as a retreat path of varying length depending upon the number of hex. retreated.
-
Victorious units that took part in the combat may then enter the vacated hex. and advance along the retreat path of the defeated unit, still respecting impassable terrain. If a retreating stack splits into several hex., the active player is free to follow whichever of the retreat path(s) he wishes.
Exception: Mechanised and Motorised units are not required to follow the retreat path of retreating units after the first hex. The advance must be on road in Difficult + Wood or Mountainous terrain. Crossing a river without a bridge costs 1 hex of advance to Mechanised and Motorised units.
-
Leg units that advance after combat stop in the second ZoC they arrive at.
-
Mechanised and Motorised units that advance are not blocked by the enemy ZoC they come into contact with.
-
In the case of a shared result, the attacker must convert all of his adverse results into step losses if he wishes to advance after combat.
-
Only the attacker may advance after combat.
Examples:
-
The result R1/– indicates that the attacker must retreat one hex. and either lose one strength step or retreat an additional hex.
-
The result –/1 indicates that the defender must retreat one hex. or lose a strength step.
-
The result 1/R1 indicates that the defender must retreat one hex. and then either retreat another hex. or take a loss. The attacker must then either retreat one hex. (the defender having retreated) or lose one strength step. If he chooses the second option, he may then advance to the hex. vacated by the defender. If the defender retreats 2 hex., for example, the attacker can follow the defender along his retreat path.
-
The result 1/R3 indicates a mandatory retreat of one hex. for the defender and 3 additional requirements to take in strength losses or retreats. The defender retreats one hex. (mandatory) then loses 2 strength steps and stays where he is or loses one strength step and retreats all his units one or two hex. The attacker will finally choose (result in bold) to retreat the stack one additional hex. to retreat or to have it lose another strength step. Then, the attacker must retreat one hex. (the defender having retreated) or lose a strength step. If he chooses the second option, he may then advance to the hex. vacated by the defender.
-
If an enemy unit is eliminated before it fulfils all of its requirements described on the CRT, the attacker can convert the remaining requirements into hex. to advance after combat.
Example: if a –/R2 result eliminates a unit that only had one strength step left, the attacker can advance 2 hex, respecting the ZoC rules.
8 - SUPPLY
8.1 - OVERVIEW
A Line of Supply (LoS) may pass through any type of terrain usable by a motorised/mechanised unit but cannot pass through an enemy-occupied hex or through an enemy ZoC, unless this hex is occupied by a friendly unit. The length of a LoS is infinite.
Note: A LoS can cross a river at a bridge.
French unit supply is checked during the French supply phase. German unit supply is checked during the German supply phase.
8.2 - SUPPLY
For a unit to be supplied, it must be able to trace a Line of Supply (LoS) to the friendly edge of the board.
- Germans: Eastern edge by the two bridges on the Rhine (except if they are destroyed) or Northern edge between hex 1101 and 2201.
- Note: as soon as a French unit enters Chalampé or Huningue, the bridge is considered destroyed.
- French: Western edge, Southern edge to the Swiss border and Northern edge to hex 401.
The presence of an enemy unit or enemy ZoC in one of these hexes cancels the LoS in this hex.
8.3 - CONSEQUENCES
-
If a unit is unable to trace a LoS during its supply phase, it gets an Isolated marker. The consequences are as follows: the unit attacks at half its combat strength but it defends itself and moves normally.
-
An isolated unit that cannot trace a LoS at the start of its turn gets an Unsupplied marker. The consequences are as follows: the unit cannot attack and it defends itself at half its combat strength and moves at half its movement value.
Note: combat strength values are rounded up to the nearest whole number.
-
An isolated HQ can support a friendly unit in defence only. An Unsupplied HQ cannot support a friendly unit.
10 - DEFENSIVE WORKS
10.1 - GERMAN STRONGHOLD
These counters represent German manned fortified positions. They have a combat value that can be added (on defence only) to those of the units present in the hex. They also have a quality.
- They have only one step and count in the stacking limits as a regiment equivalent.
- They cannot move and are destroyed in case of retreat or if they lose one step.
- They are placed on the map at the start of the scenario.
- They have a ZoC.
10.2 - FORTS
They don't have a combat value but give a bonus in defence to German units (only). See Terrain Table.
Important: stacking is limited in a fort to one garrison unit and one Leg unit.
11 - ARTILLERY
Players receive a certain number of artillery points per turn. These artillery points cannot be held from one turn to the next (see 6.2.6).
| Turn | Germans | French |
|---|---|---|
| Turn 1 | 2 | 4 |
| Turn 2 | 2 | 4 |
| Turn 3 | 3 | 4 |
| Turns 4-8 | 4 | 5 |
Source note: section 11 refers to "see 6.2.6"; the artillery rule is printed as 6.2.7 (see note in section 6).
12 - SCENARIO
The scenario begins 14 November and lasts for 8 turns.
The Artillery markers of both camps are placed on their respective levels on the appropriate track.
12.1 - SET-UP
12.1.1 - French
Units are placed in the hexes listed (hex coordinates as printed):
- BLE/1DFL: 0501
- BNA/1DFL: 0601
- CF + Morvan: 0402
- 4BM/1DFL: 0503
- Tabors: 0104
- BIMP/1DFL: 204 (printed as "204" in the source; reproduced as printed, the hex is likely 0204)
- BM/1DFL: 0304
- BM/1DFL: 0305
- RFM/1DFL: 0306
- Co de France: 0107
- Chocs: 0107
- 1RSAR: 0107
- FFI Yonne: 0109
- 3RSM/2DIM: 0111
- 4RTM/2DIM: 0211
- 8RTM/2DIM: 0212
- FFI Bourgogne: 0212
- 5RTM/2DIM: 0113
- RCA: 0113
- RICM/2DIM: 0114
- FFI Auvergne: 0313
- 6RIC/9DIC: 0413
- 21RIC/9DIC: 0514
- 23RIC/9DIC: 0614
- 9 Zouaves: 0614
- 4 RSM: 0614
- 6RTM: 0814
HQs are placed behind the front line, player's choice.
- 1A: between 0101 and 0114
- 2C: between 0101 and 0109
- 1C: between 0110 and 0114
12.1.2 - Germans
- 469/269: 0702
- Stronghold: 0703
- Ost60/269: 0603
- FEB 205: 0604
- 1210/159: 0505
- 1211/159: 0406
- 1212/189: 0207
- 1209/159: 0507
- KG Ohren: 0707
- AufKl 1000: 0807
- ssMG808: 0807
- 1213/189: 0208
- KG Rollin: 0708
- Stronghold: 0309
- 1214/189: 0210
- MG50/338: 0409
- 758/338: 0312
- 759/338: 0412
- Stronghold: 0513
- 757/338: 0714
- Stronghold: 1004
- Stronghold: 0910
HQs are placed behind the front line, player's choice.
- 4Luft. FK: between lines xx01 and xx04
- 63AK: between lines xx05 and xx14
- 19A: anywhere on the map
12.1.3 - German garrisons
Faced with the French advance, the Germans mobilized numerous second-rate troops: Festung units, Feldgendarmerie, training units, services, etc.
These troops are simulated by static counters (Festung Truppen) of unknown combat value. They have two sides: one with values and the other with a question mark.
At the start of the game, the German player draws each of the static units at random and places them face down, one counter per hex of fort, one in Chalampé and one in Huningue. There are 13 in total, so two will remain unused.
Note: the number of garrison counters is deliberately greater than that of the number to be placed on the map. The remaining counters are set aside face down and cannot be turned over until the end of the game.
A static unit can be permanently flipped to its combat value side in three ways:
- during the German movement phase, at the choice of the German player (if the flipped unit has a zero combat value, it is immediately eliminated).
- during a French commando raid (see 12.3.1).
- during a combat against this unit, after the French player has declared his attack and assigned his support(s).
If the flipped unit has zero combat value, it is immediately eliminated.
Static units cannot move. In the event of a retreat, they are eliminated. They only have one combat step and their combat value can only be used in defence. They do not project ZoCs, except in their own hex.
Note: the German player can stack a single Leg unit with a garrison in forts. For Chalampé and Huningue, a garrison counts as a battalion.
12.1.4 - First turn
The Germans were completely surprised by the French attack which they did not expect given the weather conditions. Consequently, all French attacks in the first turn benefit from a +2 DRM.
12.2 - REINFORCEMENTS
Reinforcements arrive by the indicated hexes. If several units arrive by the same hex during the same turn then the order of arrival is specified as well as a movement malus in MPs for the following units after the first one.
12.2.1 - French reinforcements
They enter by the west or south side of the map, player's choice.
- Turn 1: CC5/5DB; CC4/5DB
- Turn 2: CC2/1DB; CC3/1DB; CC6/5DB
- Turn 3: CC1/1DB; 1 x RCA
- Turn 4: 1 x RCA
- Turn 6: 1RTM (see below)
12.2.2 - Special rules
-
The 1DFL (minus the first brigade: BLE, BNA) cannot be activated before turn 4. The counters concerned are indicated by an entry turn written in black. These units can still defend themselves but neither move nor attack until the indicated turn.
Optional rule: These units can act from the first turn. This rule benefits the French player.
-
The 1 RTM infantry unit has a bonus of +2MP (i.e. 8 MP) when it enters on turn 6. For movement only this turn it uses the "Mechanized/Motorized" column.
Note: this unit arrives in trucks.
12.2.3 - German reinforcements
Note: reinforcements entering through the hex. 2302 are forced to go through Chalampé to cross the Rhine, they cannot go down and pass through Huningue (hex. 2308) which is only used for supply (see 8.2).
A - Entry based on the French advance
Note: we recommend using this option, because the entry of German reinforcements is subject to French progress.
- Vosges Group
- Turn 3: Enter through a hex. route under German control on the northern edge of the map.
- 269 ID (4 x units): between 1101 and 1301.
- 198 ID (4 x units) + Engineers 746: between 1601 and 2001.
- In the event that hex. is occupied by a French unit, use the next entrance hex. to the east.
- Turn 3: Enter through a hex. route under German control on the northern edge of the map.
- Mulhouse Group
- 1- Enter during the German movement phase of the same turn as soon as a French unit is 4 hexes away or less from Mulhouse:
- KG Rensch (ling) by hex. 1901.
-
- SS complete (3 x units) by hex. 2302.
- 2- 654 Pz. Jg. enters the next turn through the hex. 2302.
- 1- Enter during the German movement phase of the same turn as soon as a French unit is 4 hexes away or less from Mulhouse:
- Rhine Group
- 1- Enter during the German movement phase of the following turn as soon as a French unit is on or crosses column 15xx (the Rhine is threatened):
- 2SS Ersatz; 1198 Heer Motor Abteilung; KG Diemer; KG Reutlingen; 106 Panzer Brigade (2 x units) by hex. 2302.
- 2- Stug Brigade 280 enters the by the hex. 2302.
- 1- Enter during the German movement phase of the following turn as soon as a French unit is on or crosses column 15xx (the Rhine is threatened):
B - Historical entry
Note: this option benefits the German player.
- Vosges Group
- Turn 3: Same as previously.
- Mulhouse Group
- Turn 3: KG Renschling by hex. 1901. 30. SS complete (3 x units) by hex. 2302.
- Turn 4: 654 Pz. Jg. Abt by hex. 2302.
- Rhine Group
- Turn 4: 2SS Ersatz; 1198 Heer Motor Abteilung; KG Diemer; KG Reutlingen; 106 Panzer Brigade (2 x units) by hex. 2302.
- Turn 5: Stug Brigade 280 by hex. 2302.
12.2.4 - Special rules
The two infantry units of the 30.SS (75/30 and 76/30) have a bonus of +2MP (i.e. 8 MP) upon entry. For movement only this turn, they use the "Mechanized/Motorized" column.
Note: these units arrive in trucks.
12.3 - SPECIAL RULES
Source numbering note: the source prints "12.3" and sub-numbers 12.3.1 and 12.3.2 twice, once for the special rules and once for the victory conditions below; both are reproduced as printed.
12.3.1 - Commando raid
If a "Commando" unit is adjacent to a fort at the start of the French player's combat phase, he can launch a raid on this fort where there is a single static unit.
The garrison unit is revealed after the French player declares his raid. If the unit has zero combat value, the raid is a success. Otherwise, on a die roll of 1-4, the garrison is taken by surprise and the fort falls, the static unit is destroyed and the commando unit is placed on the fort. If the commando unit fails its die roll, it is eliminated and removed from the game.
12.3.2 - Capture of a bridge by the FFI
If at the start of the French player's combat phase, an FFI unit is in a hex containing a bridge, the bridge was taken by surprise. The combat modifier (-1 column) due to the attack across the bridge is ignored. The French player rolls 1d6, on a result of 6, the FFI unit is destroyed. The marker is removed at the end of the current turn.
This event can only happen once per turn.
12.3.3 - French trucks
The French player has one "Trucks" counter per turn from turn 3. This counter gives a movement capacity of 8 MP of movement to one (single) infantry regiment. The infantry unit thus motorized pays the terrain costs of the "Mechanized/Motorized" column.
12.3.4 - Traffic jam
From turn 3, the "Traffic Jam" marker can be placed on the map by the German player at the start of the French movement phase. He remains until the end of the French combat phase. French armoured or mechanized units that are under or pass through this marker pay +1 additional MP.
This marker can only be placed on one crossroads hex. (where at least two roads cross, hex. 1007 for example) or before/after a bridge.
Note: the marker can be placed directly on a French armoured or mechanized unit.
12.3.5 - Alarm Battalion
Each turn starting from turn 2, the German player can place the "Alarm Btl" marker on the map in a city or village hex. under its control (i.e. in which no French unit passed last) at any time during the French movement phase.
This immobile marker slows down the movement of French units. It does not project ZOC and costs +1 MP to a French unit to be eliminated.
12.3 - VICTORY CONDITIONS
12.3.1 - VPs count
The French player gains Victory Points (VP) this way:
- +1 VP per fort taken (9 possible points).
- +1 VP for the hex. Montbéliard/Sochaux (0610) taken and occupied.
- +1 PV per hex. of Belfort (0707-0708) taken and occupied.
- Note: hex. 0707 counts double: fort + city.
- +2 PV per hex. of Mulhouse (1704-1804) taken and occupied.
- +1 PV for Masevaux (1003) taken and occupied.
- +1 PV for Cernay (1402) taken and occupied.
- +1 PV for Altkirch (1607) taken and occupied.
- +1 PV for Chalampé (2202) and Huningue (2308) taken.
- Note: as soon as these two cities are taken, the bridge located there is considered destroyed even if the French player does not occupy them.
- +1 PV per supplied French Combat Command.
Note: occupied means that the last unit to have passed through is French.
12.3.2 - Victory at the end of the game
The French player counts his VPs:
- 7 PV and less: German operational victory.
- 8-12 VP: German tactical victory.
- 13-14 PV: French tactical victory.
- 15-18 PV: French operational victory.
- 19 PV et plus: French strategic victory.
14 - ABBREVIATIONS
French
- BLE: Foreign Legion battalion
- BIMP: Marine Infantry and Pacific battalion
- BM: March battalion
- BNA: Nord-Africain battalion
- DFL: Free French Division
- DIC: Colonial Infantry Division
- DIM: Moroccan Infantry Division
- DMM: Moroccan Mountain Division
- CA: Army Corps
- CC: Combat Command
- RFM: Marine Infantry Regiment
- RIC: Colonial Infantry Regiment
- RSAR: Algerians Spahis recon Regiment
- RSM: Moroccan Spahis Régiment
- RTM: Moroccan Light Infantry Regiment
Germans
- Aufkl. Abt: Recon battalion
- FEB: Feld Ersatz battalion
- FEST: Fortress units
- GR: Grenadier Regiment
- MG: Machine Gun battalion
- Ohren: deaf battalion
TABLES
Terrain Effects Table
| Terrain | Leg units (MP) | Mechanised/Motorised (MP) | Combat |
|---|---|---|---|
| 1 - Clear | 1 | 1 | – |
| 2 - Wood | 1 | 2 | -1 column |
| 3 - Difficult | 1 | 2 | -1 column |
| 4 - Difficult + Wood | 2 | 3 | -1 column |
| 5 - Mountainous | 3 | Forbidden except on road | -2 column |
| 6 - Village | Other terrain | Other terrain | -1 column |
| 7 - City |
* Modifier in combat if the attacker and/or defender is in the hex.
Quality Modifier
Result: column shifts.
| Die | A | B | C | D |
|---|---|---|---|---|
| 1 | – | -1 | -2 | -2 |
| 2 | – | – | -1 | -1 |
| 3 | – | – | – | -1 |
| 4 | +1 | – | – | – |
| 5 | +1 | +1 | – | – |
| 6 |
Combat Modifiers
Modifiers are applied in this order:
- Defender's terrain: see Terrain Table.
- Divisional integrity: +1 column.
- Armour vs Infantry: +1 column.
- Infantry + armour: +1 column.
- Armoured bonus: +1 column.
- Co. or Engineers against city/village: +1 column.
- Machine Gun: -1 column vs Leg infantry.
- Artillery: +1 column, 2 maximum per combat.
- Concentric attack: +1 column.
- Quality: see above.
- DRMs: 654 s.PzJg vs Armour: +1; French 1st turn: +2; combat ratio > 8/1: +1.
All of these modifiers are cumulative but there can only be one modifier of each type in the same combat.
Combat Results Table
Attacker/Defender. Number: number of steps to lose and/or retreat. R: mandatory retreat except for units of quality A and B that can take a loss instead. Bold result: the last requirement to follow (step loss or retreat) is chosen by the attacker.
| Die | 1/3 | 1/2 | 1/1 | 3/2 | 2/1 | 3/1 | 4/1 | 5/1 | 6/1 | 7/1 | 8/1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | R2/- | R1/- | R/- | 1/- | 1/- | 1/1 | 1/1 | -/1 | 1/R | -/R | -/R1 |
| 2 | R1/- | R/- | 1/- | 1/- | 1/1 | 1/1 | -/1 |
Bold cells in the table above mark the source's bold results (the last requirement chosen by the attacker).
EXAMPLES OF COMBAT
- Combat A. The three French units 6/9 DIC, Zouaves and RCA attack units 759/338 and AufKl. 1000. 11 combat factors against 4, i.e. a ratio of 2/1, the infantry + armor modifier cancels out on each side but the French has an armoured bonus i.e. 3/1. The French player, thanks to HQ 1C, provides artillery support, the final ratio is 4/1. The French player rolls 2d6, he obtains 4 for combat and 2 for quality B (no effect). The German player obtains 4 for quality C (also no effect): the result obtained on the CRT is therefore -/R. The German retreats one hex. in 809. The French advance into the vacated hex. with two of his units. If a bridge had existed between the hexes 0710 and 0711, he could have advanced the RCA to 0710.
- Combat B. The combat ratio is more favorable to the French: 13 against 3 or 4 against 1. CC4 brings its infantry + armor modifier, the ratio becomes 5/1, both players commit their last artillery points which cancel each other out. The French rolls the dice and gets 4 and 5 for quality B, he goes up to 6/1, the German player gets 3, nothing. The final result is 1/R2. The German player retreats 3 hexes. in 1110 in order to control the bridge and loses a step while passing through the ZoC of the 6RTM. The French player decides to take a loss on the 6 RTM infantry unit and advance as much as possible. If the French player had rolled a 5 on his combat die (-/R2), he could have destroyed the German unit by choosing a loss for his last result obligation.
SOURCE NOTES
- Section 7, section 9, section 13 and the "Identification (see appendix)" appendix are not printed in the source. References to 13.2 (HQ return as reinforcement) and to the appendix are reproduced as printed.
- Section 6.2.6 is not printed as a heading (see the artillery numbering note in section 6).