RulesPal
Chat
Rulebook
Revelation War thumbnail

Revelation War

Revelation War Rulebook

Table of Contents

Table of Contents

  • 1.0 Introduction
    • 1.1 Revelation War: The Coming Struggle for the Holy Land (RW)
    • 1.2 Scales
    • 1.3 Anti-Israel Coalition
    • 1.4 Orders of Battle
  • 2.0 Components
    • 2.1 Components
    • 2.2 Game Map
    • 2.3 Unit-Counters
    • 2.4 Sample Combat Unit
    • 2.5 Nationality
    • 2.6 Specific Identifications & Abbreviations
    • 2.7 Unit Sizes
    • 2.8 Unit Types
    • 2.9 Combat Factors (CF)
    • 2.10 Movement Factors (MF)
    • 2.11 Step Strength
    • 2.12 Multi-Step Units
  • 3.0 Set Up & Hex Control
    • 3.1 In General
    • 3.2 Marker & Substitute Counter Set Asides
    • 3.3 Hezbollah & Palestinian Set Up
    • 3.4 Anti-Israel Coalition Mobile Units Set Up
    • 3.5 Israeli Set Up
    • 3.6 Hex Control
    • 3.7 Hex Control vs. Zone of Control
  • 4.0 How to Win
    • 4.1 In General
    • 4.2 AIC Sudden Death Victory
    • 4.3 Victory or Defeat on Points
    • 4.4 Israeli Victory Point Awards
  • 5.0 Turn Sequence
    • 5.1 In General
    • 5.2 Turn Sequence
    • 5.3 Move/Fight or Fight/Move
    • 5.4 Fight/Move & Move/Fight Combat Bonus & Penalty
    • 5.5 Israeli Airpower Phases
    • 5.6 Mutual Cyberwar Phases
    • 5.7 Administrative Phases
    • 5.8 Ending a Turn & Ending a Game
  • 6.0 Israeli Airpower
    • 6.1 In General
    • 6.2 Marker Placement
    • 6.3 Range
    • 6.4 Israeli Airpower's Effect on AIC Movement
    • 6.5 Israeli Airpower in Combat
    • 6.6 Marker Retrieval & Reuse
  • 7.0 Cyberwar
    • 7.1 In General
    • 7.2 Procedure
    • 7.3 Massive Cyber Attack
    • 7.4 Enemy Command-Control Disruption
    • 7.5 Friendly Command-Control Enhancement
    • 7.6 Israeli Air Superiority Disruption
  • 8.0 No Stacking
    • 8.1 In General
    • 8.2 AIC Non-Stacking
    • 8.3 Israeli Non-Stacking
    • 8.4 Markers
  • 9.0 Zones of Control
    • 9.1 In General
    • 9.2 Seas & Lakes & Rivers & Canals
    • 9.3 Enemy Zones of Control (EZOC) & Movement
    • 9.4 EZOC & Advance After Combat
    • 9.5 Israeli Probing Attacks
    • 9.6 Israeli Momentum Attacks
  • 10.0 Movement & Geographic Nationality Restrictions
    • 10.1 In General
    • 10.2 Limits
    • 10.3 No Minimum Movement Guarantee
    • 10.4 Terrain & Water Barriers
    • 10.5 Clear Terrain
    • 10.6 Rough Terrain
    • 10.7 Egyptian Pass Hexes
    • 10.8 Marsh or Salt Pan
    • 10.9 All-Sea Hexes & Hexsides
    • 10.10 River Hexsides
    • 10.11 Suez Canal Hexsides
    • 10.12 Cities
  • 11.0 Combat
    • 11.1 In General
    • 11.2 Multi-Hex Attacks & Single Hex Defenses
    • 11.3 Indivisibility of Units
    • 11.4 Attack Sequencing
    • 11.5 Combat Procedure & Palestinian & Hezbollah Defense Factors
    • 11.6 Combat Results Table (CRT) Limits
    • 11.7 Combat Column Shifts
    • 11.8 Clear Terrain
    • 11.9 Rough Terrain
    • 11.10 Lakes & Seas & Rivers & Canals
    • 11.11 Cities & Israeli Intrinsic Garrisons

1.0 Introduction

1.1 Revelation War: The Coming Struggle for the Holy Land (RW)

If America continues its zigzag withdraw from imperium, there will be vast global repercussions. In and around Israel, the international security guarantees put in place there with the 1978 Camp David Accords will effectively be gone.

This near-future what-if wargame investigates that Israeli worst-case scenario. Left on their own in that way, they must fight to a defeat a coalition of Hezbollah, Hamas, Russia, China, Egypt, Jordan, Syria, Iran and Turkey — and they must try to win without resorting to the use of atomic weapons or other WMD. Cynically, the Anti-Israel Coalition player "wins" by doing well enough on the conventional battlefield to force the Israelis to go atomic, thereby setting World War III into motion.

The game isn't meant as a staging of the Biblical prophesies in the books of Isaiah, Jeremiah, Ezekiel, Daniel and Revelation. Even so, the overlap between those prophesies and the potential strategic situation being modeled here are numerous. We've therefore included a set of 15 iconic counters, each depicting a character or scene from those Biblical "end times" descriptions. Players can incorporate them into the game in any ways that best suit their own religious outlooks and predilections.

1.2 Scales

Each hexagon on the map represents 7.5 miles (12 kilometers) from side to opposite side. The units of maneuver are brigades, divisions, corps and entire armies. Air power and cyberwarfare are represented abstractly, with counters and rules showing their effects on maneuver and combat in the physical world. Each full turn represents one day of real time.

1.3 Anti-Israel Coalition

If a rule is said to apply to "Anti-Israel Coalition (AIC) units," it applies to all the units in the game belonging to the nations and factions opposed to Israel: China, Iran, Russia, Turkey, Syria, Hezbollah, Jordan, Egypt, and the Gaza and West Bank Palestinians.

Those latter two groups aren't further differentiated. That's in order to allow for nominal regime change within either or both them, while assuming their overall anti-Israel orientation remains the same. Similarly, Egypt and Jordan are assumed to have become radically Islamist soon after the final American departure from the region.

If a rule applies to some AIC units but not to all, the specific nation or grouping to which it applies will be stated.

1.4 Orders of Battle

Both sides' orders of battle are drawn directly or extrapolated from their current organizational structures. For example, there are no Chinese units presently in this region; however, their Airborne Corps of the People's Liberation Army Air Force (formerly XV Airborne Corps) has recently been identified as their "premier strategic intervention force." That's therefore the formation we assume would be deployed to protect the integrity of the portion of their new "Maritime Silk Road" running through the Suez Canal (after being air-transported there via their recently acquired bases in Gwadar and Djibouti).

Similarly, the Russians are currently organizing their "First Guards Red Banner Tank Army" to be their ultra-elite offensive grouping (actually the equivalent of large Western corps), so we chose that title to their unit in the game.

2.0 Components

2.1 Components

The Components to a complete game of RW include these rules, the mapsheet and the sheet of 176 die-cut counters, which are also referred to as "units" and "unit-counters." Players must provide a standard six-sided die to resolve combat and other probabilistic game events.

2.2 Game Map

The map illustrates the militarily significant terrain found in and around Israel when portrayed at this scale under these system dynamics. A hexagonal ("hex") grid is printed over the map to regulate the placement and movement of units across it, much as in Chess and Checkers. A unit is considered to be in only one hex at any one time.

Every hex on the map has a unique four-digit identification number printed within it. They're provided to help find exact locations more quickly and to allow for the recording of unit positions if a game has to be taken down before it can be completed. For example, the Syrian city of Damascus in hex 3900.

2.3 Unit-Counters

Most of the unit-counters represent combat formations, while others are informational markers and memory aids. After reading through these rules at least once, carefully punch out the counters. Using a nail clipper (or a purpose-designed counter-clipping device) to remove the nub-like "dog ears" from their corners will facilitate the units' easy handling and stacking during play, and it will also demonstrate to your opponents your samurai-like determination and discipline.

2.4 Sample Combat Unit

Each combat unit-counter displays several pieces of information: nationality, specific historical identification, unit type and size, combat and step strengths, movement allowance or other special status.

The illustration shows the full-strength increment of the Israeli Armored Corps. It has an attack factor of 16, a defense factor of 12 and step-strength of 8.

[Counter diagram: labels are Specific Unit Identity, Unit Type, Unit Size, Nationality, Attack Factor, Defense Factor, Step Strength. Nationality is Blue on White for Israeli.]

2.5 Nationality

A unit's nationality, and therefore the side it's on, is shown by its color scheme.

Israeli units: Blue on white.

Anti-Israel Coalition units:

  • Chinese (C) — white on scarlet
  • Egyptian (E) — black on orange
  • Iranian (I) — white on black
  • Jordanian (J) — black on tan
  • Russian (R) — black on scarlet
  • Syrian (S) — black on yellow
  • Turkish (T) — black on green

2.6 Specific Identifications & Abbreviations

All units are given their specific identities by the numbers or names used to designate those formations. Those abbreviations are as follows.

AIC abbreviations:

  • 1G — Russian 1st Guards Red Banner Tank Army
  • AC — Chinese Airborne Corps
  • 5A — Syrian 5th Attack Corps
  • CC — Jordanian Central Command
  • EC — Jordanian Eastern Command
  • NC — Jordanian Northern Command
  • SC — Jordanian Southern Command
  • IHB — Imam Hussein (Basij Militia) Brigades
  • RG — Syrian Republican Guard Division
  • RGC — Iranian Revolutionary Guard Corps
  • SFC — Syrian Special Forces Command
  • SOC — Jordanian Special Operations Command

Israeli abbreviations:

  • AC — Armored Corps
  • IC — Infantry Corps
  • R — Reserve
  • T — Territorial

Design Note. On Egyptian units, the two-digit I.D. numbers are to be read as: army-corps. For Example, the unit identified as "2-3" is the Third Corps of Second Army.

2.7 Unit Sizes

  • XXXX — army
  • XXX — corps
  • XX — division
  • X — brigade

Design Note. If a unit's size symbol is beneath a bracket, that means it's not officially designated as one of the common organizational sizes shown above, but the symbol shown is the one most closely approximated by it.

2.8 Unit Types

The following symbols in each counter's unit-type box distinguish the various combat arms.

  • Israeli Mechanized Infantry or AIC Combined Arms
  • Armor
  • Motorized Infantry
  • Motorized Paratroops
  • Motorized Special Forces
  • Palestinian Gaza & West Bank Static Forces
  • Hezbollah Static Forces

2.9 Combat Factors (CF)

Attack and defense factors (AF & DF) — together called "combat factors" — are the measures of each unit's ability to conduct those types of combat operations. Their specific uses are explained in section 11.0.

2.10 Movement Factors (MF)

This number is a measure of a unit's ability to move across the hex grid printed over the map. Units pay varied movement costs to enter different hexes, depending on the terrain in each. Unlike most wargames, the units' MF aren't printed on the counters. For AIC units they're determined anew each time a unit is moved based on a die roll and their nationality as listed below. Israeli MF are based on general category, and no die rolls are involved. Palestinian and Hezbollah units never move except to go into the dead pile.

  • Russian & Chinese Units: MF = 8
  • All Other AIC Units: roll a die before each unit's move, for an MF of 1 through 6.

Israeli movement factors are set rather than rolled up, and are based on their general category as listed below.

  • Territorial (T) Units: MF = 6.
  • Reserve (R) Units: MF = 7.
  • All Others: MF = 8

Design Note. In further regard to the MF of both sides, also see rule 7.4.

2.11 Step Strength

All ground units in the game have one through eight "strength steps," which are also simply called "steps." That's an arbitrary term used to express the ability of a Israeli Mechanized Infantry or AIC Combined Arms unit to absorb a certain amount of combat losses before ceasing to be an effective formation (a measure of its "robustness" in current US Army jargon).

Each unit's current step strength is shown by the rightmost number printed along its bottom edge. If a two-step unit suffers a one-step loss, it's flipped over so its one-step side shows. If a one-step unit, or a two-stepper that's already been "reduced," suffers a step loss, it's removed from the map ("eliminated") and placed into a "dead pile" off to the side. No fully eliminated unit is ever returned to play, at any level of step strength, for the remainder of the game.

All units of both sides begin play at their full step-strength. No unit of either side ever regains lost step strength; units only grow weaker, never stronger, during play.

2.12 Multi-Step Units

The Russian and Chinese units, along with most Israeli units, have more than two strength-steps available within them. When such units are reduced to step strengths below what's shown on the backside of their strongest counter, remove that counter from the map and replace it with their next weaker "substitute" counter. Other than that, the principle of step reduction here is the same as described above in 2.11 for two-step units.

Note that no multi-step unit will ever have more than one of its counters in play on the map at any one time. Also note that substitute counters are marked with large dots in their upper-left corners for easier identification as such.

2.13 Hezbollah & Palestinian Static Forces

These are only "units" in the most general sense. They are "static" in that they never move once placed on the map except to possibly (and permanently) go into the dead pile. They count for stacking and they each have step-strengths of one; however, they never attack nor do they exert zones of control. Their defense strength is established anew each time they're attacked. See 11.5 for details.

2.14 Other Marker-Counters

The uses of the following counters are explained at the appropriate points throughout the rest of the rules.

  • Biblical Imagery Marker, see 1.1
  • Turn Marker, see section 5.0
  • Israeli Airpower Marker, see section 6.0
  • Cyberwar Marker, see section 7.0

3.0 Set Up & Hex Control

3.1 In General

The players should first decide which side each will control. After that, they each take their own units and sort them onto and around the map according to sequence and instructions below.

3.2 Marker & Substitute Counter Set Asides

Both players should set off to the side of the map, within each reach, all the Cyberwar, Israeli Airpower and Biblical Imagery markers. Place the Turn marker in the number 1 box of the Turn Track printed on the mapsheet. The AIC player should take all the dotted Russian 1G and Chinese AC substitute unit-counters and set them off to the side of the map within his easy reach. Similarly, the Israeli player should take all the dotted substitute unit-counters for his forces and set them off to the side of the map within easy reach.

3.3 Hezbollah & Palestinian Set Up

Both players cooperatively set up the Hezbollah and Palestinian static counters. One Hezbollah marker goes in each of the 14 hexes of southern Lebanon shown on the map. Each of the Palestinian markers has a specific Gaza or West Bank hex-number printed on its backside; place all of them accordingly.

Note: there will be empty hexes remaining within the West Bank but not in Gaza.

3.4 Anti-Israel Coalition Mobile Units Set Up

The AIC player should next place all his side's mobile units as follows.

Note that stacking rules (see section 8.0) are in effect during AIC set up.

  • The Chinese AC unit is placed in Suez City (1426).
  • Egyptian units are placed anywhere in Egypt.
  • Jordanian units are placed in any hexes in Jordan.
  • The Russian unit, along with all Turkish, Syrian and Iranian units, are placed in any hexes in Syria and/or Jordan.

3.5 Israeli Set Up

The Israeli player sets up all his side's units in any hexes in Israel, along with any hexes in the West Bank that don't have a Palestinian static unit in them. Note that the stacking rules (see section 8.0) are in effect during Israeli set up.

3.6 Hex Control

The idea of "hex control" — which side "owns" which hexes at any given instant — is important for judging victory (see section 4.0). At the start of play, the Israeli side controls all the hexes in that country along with all those in the West Bank that don't have a Palestinian unit in them. The AIC side controls all other hexes on the map.

The control status of a hex switches from one side to the other whenever a ground unit from the other side enters it. Control switching is immediate, and may occur and reoccur in the same hexes any number of times during play.

3.7 Hex Control vs. Zone of Control

Don't confuse the idea of "hex control," explained above, with that of "zones of control" (ZOC), which is explained in section 9.0. For now, all you need understand in regard to the latter is the fact the mere projection of a ZOC into an enemy-controlled hex isn't enough by itself to cause the control status of that hex to switch from one side to the other.

4.0 How to Win

4.1 In General

Both players have the opportunity to go on the attack and win the game offensively. The AIC player may also win defensively by preventing too large a debacle from taking place within his coalition. The inescapable burden of going onto the strategic offensive is therefore on the Israeli player.

4.2 AIC Sudden Death Victory

If, at any time during play, an AIC unit enters any Israeli city via advance-after-combat (see 11.11 & 11.17), that game is ended and the commander of the AIC has won the game (and nuclear Armageddon is assumed to follow shortly thereafter).

4.3 Victory or Defeat on Points

At the end of the last turn of play (see 5.8), the Israeli player should total his "victory points" (VP) based on the list below in 4.4.

  • If the Israeli player has four or fewer VP, that game has ended in an AIC victory. That means another and similar war can be expected to break out almost immediately, and Israel will likely have to go atomic soon after its start. That will probably bring on a strategic-level nuclear exchange with China and Russia, thereby in turn bringing on global ecological collapse and Armageddon.
  • If the Israeli player has five or six VP, that game has ended in a draw. That means another and similar war can be expected to break out again in the intermediate future, though Israel may yet win that rematch without having to go atomic.
  • If the Israeli player has seven or eight VP, that game has ended in an Israeli minor victory. That means another and similar war will likely be fought several years later in order to try again to finally resolve the issue.
  • If the Israeli player has nine or more VP, that game has ended in an Israeli victory of Biblical proportions. That means peace will reign across the region for the foreseeable future (possibly as long as 1,000 years).

4.4 Israeli Victory Point Awards

The VP in the list below can be accrued by the Israeli player in any order throughout the game.

  1. The Israeli player scores one VP for fully eliminating the Chinese unit. In further regard to the elimination of the AC, also see 7.2.
  2. The Israeli player scores one VP for fully eliminating the Russian unit. In further regard to the elimination of this unit, also see 7.2.
  3. The Israeli player scores two VP for having eliminated every Hezbollah unit in Lebanon from the map.
  4. The Israeli player scores one VP for having taken control of Amman (3912) at any time during the game. Once that's done, he needn't keep control of that hex in order to retain this point. If Amman is taken while one or more Jordanian units are still in play, fully eliminate them at that time.
  5. The Israeli player scores one VP for having taken control of Damascus (3900) at any time during the game. Once that's done, he needn't keep control of that hex in order to keep this point. If Damascus is taken while one or more Syrian units are still in in play, fully eliminate all of them at that time.
  6. The Israeli player scores one VP for eliminating all Iranian units.
  7. The Israeli player scores one VP for eliminating all Turkish units.
  8. The Israeli player scores two VP for having taken control of Cairo (1026) at any time during the game. Once that's done, he needn't keep control of that hex in order to keep these points. If Cairo is taken while there's still one or more of Egyptian units in play, fully eliminate all of them at that time.
  9. The Israeli player scores one VP for having eliminated every Palestinian unit in Gaza.
  10. The Israeli player scores one VP for having eliminated every Palestinian unit in the West Bank.

5.0 Turn Sequence

5.1 In General

Every turn of RW is divided into seven major segments, called "phases." Each full sequence of phases makes up one "game turn," of which there are a maximum of seven in an entire match.

Every action taken by a player must be carried out during the appropriate part of the sequence outlined below. Once a player has finished a particular phase or a specific activity within a phase, he may not go back to perform some forgotten action or redo a poorly executed one unless his opponent graciously permits it.

5.2 Turn Sequence

The full turn sequence is given below in outline. Each turn is played through using this exact and identical sequence.

GAME TURN SEQUENCE OUTLINE

I. Israeli Airpower Phase II. Mutual Cyberwar Phase III. Israeli Movement or Combat Phase IV. Israeli Combat or Movement Phase V. Anti-Israel Coalition Movement or Combat Phase VI. Anti-Israel Coalition Combat or Movement Phase VII. Administrative Phase

5.3 Move/Fight or Fight/Move

At the start of every turn's Phase III, the Israeli player must declare in what order he will carry out his side's movement and combat phases that turn. That is, he may choose to have his units move first and attack after that, or he may take his combat phase first and movement phase second. Similarly, at the start of every turn's Phase V, the AIC player must make the same phase order declaration for his side for that turn.

That decision is up to each player, decided and announced on a turn by turn basis. No matter what phase order a player chooses, all his units are allowed to participate to the limit of their normal capabilities in them. The players only make one phase order declaration at the times described above, which is then applied to all his units throughout that turn. Neither may choose one phase order for some of his units and the other phase order for other units.

5.4 Fight/Move & Move/Fight Combat Bonus & Penalty

During turns in which the Israeli player chooses the fight/move phase sequence, all his attacks are considered "prepared," and they therefore gain a one-column-right shift on the CRT in conjunction with all other applicable shifts.

The AIC player never has the fight/move prepared attack bonus described above available for his force's attacks. Further, if he chooses the move/fight sequence, all his side's attacks that turn suffer a one-column-left shift on the CRT in conjunction with all other applicable shifts.

Note: when the Israeli player chooses move/fight, he suffers no penalty, but he does thereby give up the fight/move prepared assault bonus for that turn.

5.5 Israeli Airpower Phases

On Turn 1 there is no Israeli Airpower Phase, nor are any of those markers available for that player's use that turn. The Israeli Air Force is assumed to be fully committed that turn in destroying the AIC air forces on their bases.

At the start of every subsequent turn's Phase I, the Israeli player openly rolls a die and receives and deploys that number (one through six) of airpower markers. See section 6.0 for details on those deployments.

5.6 Mutual Cyberwar Phases

At the start of every turn's Phase II, both players openly roll a number of dice and compare those totals to see which side has "cyber dominance" for that turn. For details on that, see section 7.0.

5.7 Administrative Phases

Use these phases to tidy up around the map, making sure the various markers are retrieved and readied for reuse.

5.8 Ending a Turn & Ending a Game

Turns are completed when each one's Phase VII is concluded. At those times move forward by one box the Turn marker on the track printed on the mapsheet and start Phase I of the next turn. If the Turn just ended is Turn 7, that game is over. Consult section 4.0 to determine who won.

6.0 Israeli Airpower

6.1 In General

These rules have been crafted to build in the general Israeli air superiority assumed to be unchallengeable by the AIC.

6.2 Marker Placement

An available Israeli Airpower marker (see 5.5) may be placed by that player in any hex on the map. Friendly and enemy ground unit and/or ZOC presence has no bearing on this. Note, though, no more than one marker may be placed in any one hex. All available markers must be deployed as soon as they become available during Phase I of Turns 2 through 7.

6.3 Range

Every airpower marker on the map effects the hex in which it's placed and all of the immediately surrounding hexes. That combined area is termed its "range." If the ranges of two or more airpower markers overlap, there are no additive effects because of it.

6.4 Israeli Airpower's Effect on AIC Movement

For an AIC unit or stack to make a move into a hex that's in range of one or more airpower markers, it must pay an extra movement point (MP) to do so for each such hex entered, for both in-hex and hexside costs. Airpower markers have no effect, positive or negative, on the movement of Israeli forces.

6.5 Israeli Airpower in Combat

If an Israeli force makes an attack into a hex that's in range of one or more airpower markers, that attack gains a one-column rightward shift (cumulative with all other applicable shifts). Conversely, if an AIC attack is launched against an Israeli force, and that Israeli force is in range of one or more airpower markers, that Israeli defense benefits from a one-column leftward shift (cumulative with all other applicable shifts). Those airpower shifts never amount to more than one column per battle, no matter how many markers are in range.

6.6 Marker Retrieval & Reuse

Deployed airpower markers generally remain on the map until Phase VII each turn (but see 7.6 for the exception), at which time they're retrieved for possible use again in the next turn. Airpower markers are never subject to elimination; all the markers are always available for use as described above.

7.0 Cyberwar

7.1 In General

The Cyberwar Phase represents both sides' efforts at gaining a combat advantage through the use of networked computers, the internet and the cloud.

7.2 Procedure

At the start of every turn's Mutual Cyberwarfare Phase follow the procedure given below. The player who wins that comparison has the temporary cyberwarfare advantage for that turn. The winning player (reroll ties) should select the number of Cyberwarfare Point (CWP) markers from the counter-mix equal to his overall CWP superiority point count. For example, if the Israeli player's dice roll totaled 12 and that of the AIC player totaled nine, the Israeli player has dominance that turn with three CWP available for him to deploy into play.

The general rule in regard to the number of dice to rolled is: the Israeli player will roll four dice, and the AIC player will roll three. If, however, the Chinese AC unit is fully eliminated, the AIC player will thereafter roll one fewer die on that account. Similarly, if the Russian 1G unit is fully eliminated, the AIC player will thereafter roll one fewer die on that account. So, if both those units are fully eliminated, the AIC player would roll only one cyberwar die on that account.

If the AIC player's die roll number has been decreased by one or two, it may never be increased again afterward. Also note the only way the number of dice rolled by the Israeli player may be decreased is under the provision of rule 7.3 below.

No CWP may be saved beyond the end of the turn in which it's received.

7.3 Massive Cyber Attack

It costs six CWP to make a massive cyber attack. If you have 12 or more CWP, you may decide to make two such attacks simultaneously. The effect of cyber attacks isn't felt immediately; however, during the resolution of the Cyberwar Phase your opponent rolls one fewer die on the following turn (or two fewer if you make two attacks).

The decision to launch a massive cyberwar attack must be announced to your opponent immediately during the Mutual Cyberwar Phase in which the CWP to be used for it are earned. There's no variability in the outcome of a cyberwar attack, simply expending six (or 12) points is enough to guarantee the outcome of the effort.

Source note: rule 7.2 is transcribed as printed, including the wording "the number of dice to rolled".

7.4 Enemy Command-Control Disruption

To disrupt an enemy ground unit, you should place the desired number of your available CWP atop it on the map. The effect of each CWP on their target unit is as follows.

  • For movement purposes, each CWP causes a one MP deduction from the movement allowance that would otherwise be available to the cyber-attacked unit. It's possible for a unit to be fully immobilized in this way.
  • One or more CWP atop an Israeli unit also prevents it from using column movement that turn (see 10.14).
  • For combat purposes, each one of your CWP atop an enemy unit generates a one attack factor addition to the combat differential calculation in any conventional (non-cyber) attack you make against that unit that turn. Similarly, any attacking enemy force that has atop it one or more of your side's CWP gives your defending force in that battle a one defense factor addition during the differential calculation process.

7.5 Friendly Command-Control Enhancement

For the cost of one CWP you may, at any time during your opponent's movement phase that turn, force him to stop moving in order to allow you to interrupt his activities with a move of a unit of your own. When you make such a call, your opponent is allowed to finish the move of the unit he is conducting at the time of your interruption. If you make the call at an instant when he's clearly not in the process of conducting a particular move, he doesn't get a 'bonus' move before your interruption goes into effect; you simply make your phase-interrupting move and he then resumes his movement phase.

For the cost of one CWP you may, at any time during your opponent's combat phase that turn, force him to stop resolving his own side's attacks in order to allow you to interrupt his activities with an attack of your own. When you make such a call, your opponent is allowed to finish the resolution of the attack he was conducting at the time of your interruption. If you make the call at an instant when he's clearly not in the process of conducting a particular attack, he doesn't get a 'bonus' attack before your interruption goes into effect; you simply make your phase-interrupting attack and he then resumes his combat phase. One CWP will allow one of your units to attack; if you want it to be a multi-hex attack, you need to expend one CWP for each hex of the attacking force.

Note that the participation of your units in friendly command-control enhancement operations doesn't in any way inhibit those same units from also participating normally in your own side's movement and combat phases later that same turn. Conversely, friendly units that already participated in your own side's movement and/or combat phases that turn may also still be activated later in the turn during your opponent's movement and combat phases.

All normal movement, ZOC and combat rules, costs, etc., apply during these kinds of operations.

7.6 Israeli Air Superiority Disruption

All the options given above are potentially available to both players based solely on their CWP. This option is only available to the AIC player. That is, he may expend CWP to remove Israeli Airpower markers from the map at the rate of one CWP expended for one airpower marker removed.

8.0 No Stacking

8.1 In General

Stacking is the term used to describe the piling of more than one friendly unit in the same hex at the same time. Stacking is extremely limited in this game. That is, in general, there may never be more than one friendly unit in any hex at any one time. Units of the two opposing sides never stack together, not even for an instant.

8.2 AIC Non-Stacking

For AIC units, the stacking rules are in effect all through every phase of every turn. That player therefore needs to be careful in regard to the order in which he moves his units; otherwise, moves made carelessly early in his movement phase may work to jam up his units later in that phase.

8.3 Israeli Non-Stacking

The Israeli player is also generally governed by the no-stacking provision set out above for the AIC player; however, there's an important difference. That is, the Israeli no-stacking rule is only enforced at the end of every Israeli unit's move. During each Israeli unit's move, it may violate the no-stacking rule — but only with other Israeli units — without penalty or hindrance of any kind.

8.4 Markers

None of the markers pictured in rule 2.14 count for stacking for either side, and they may be placed in hexes according to the rules for their respective uses.

9.0 Zones of Control

9.1 In General

The six hexes immediately surrounding a hex containing one or more mobile ground units constitute the "zone of control" (ZOC) of the units in that hex. Zones of control extend across all hexsides, and into and out of types of terrain, except all-lake/all-sea hexes and hexsides. All mobile ground units of both sides project their ZOC at all times.

There's no difference in effect between ZOC projected by units of different sides into the same hex. Opposing units may simultaneously project their ZOC into the same hexes.

9.2 Seas & Lakes & Rivers & Canals

ZOC don't extend across all-lake or all-sea hexsides. ZOC do extend across river and canal hexsides.

9.3 Enemy Zones of Control (EZOC) & Movement

A moving unit must end its move for that phase when it first enters an EZOC. A unit that begins its move already in an EZOC may leave that hex, but only by entering a hex that doesn't contain any EZOC, and it must stop for that phase as soon as it does enter a hex containing an EZOC. Thus units may not move directly from EZOC to EZOC.

The presence of a friendly unit in a hex containing an EZOC doesn't negate that EZOC for movement purposes. That means, when this rule is combined with the stacking rules given in section 8.0, the Israeli player may not use friendly unit presence in an EZOC as a way to move other friendly units through that hex.

9.4 EZOC & Advance After Combat

EZOC don't in any way inhibit or block the ability of victorious units advancing-after-combat. See 11.17 for details.

9.5 Israeli Probing Attacks

AIC ZOC hexes that are otherwise empty of units may be the subject of Israeli "probing attacks." See 11.19 for details.

9.6 Israeli Momentum Attacks

AIC ZOC don't inhibit or block the ability of victorious Israeli units advancing-after-combat from making a momentum attack. See 11.18 for details.

10.0 Movement & Geographic Nationality Restrictions

10.1 In General

Every ground unit in the game has a movement factor that's based in its type for the Israelis and is determined by die roll for the AIC. See 2.10 above for details. That factor is the number of "movement points" (also called "MP," "movement factors" and "MF") available to the unit to use to move across the hex grid during its side's movement phases in each turn. Units move from hex to adjacent hex — no "skipping" of hexes is allowed — paying varied costs to do so depending on the type of unit moving and the terrain in, and water barriers along the sides of, the hexes being entered.

The movement of each player's ground units takes place only during his own side's movement phases, and no enemy movement takes place during your own side's movement phases.

10.2 Limits

MP may not be accumulated from turn to turn or phase to phase, nor may they be loaned or given from one unit to another. A player may potentially move all, some or none of his mobile units in each of his movement phases throughout the game. Units that move aren't required to expend all their MP before stopping. The movement of each unit must be completed before that of another is begun. A player may only change the position of an already moved unit if his opponent agrees to allow it.

10.3 No Minimum Movement Guarantee

There's no guaranteed ability for any unit to be able to move at least one hex during a movement phase. To enter any hex, a moving unit must have sufficient MP available to pay all the involved costs or the move may not be made. Also note moving units may never enter hexes containing enemy static or mobile units.

10.4 Terrain & Water Barriers

There are nine types of terrain and hydrographic features on the map. The effects those various features have on the movement of units are described below and are also summarized on the Terrain Effects Chart (TEC) printed on the mapsheet for quick reference during play.

There's always just one type of movement-governing terrain in any given hex. For a hex to be considered "clear," it must be entirely devoid of any other terrain. If a hex contains any amount of rough or marsh/salt pan it's considered entirely that type of terrain.

Also note, though "marsh" and "salt pans" are in reality two different terrains, for our purposes they're one and the same in regard to their effect on movement and combat, and so are shown that way on the map.

10.5 Clear Terrain

This is the "base" terrain of the game; it's devoid of any natural features that would enhance defense or slow movement at this level of operations. Each clear hex costs all ground units one MP to enter. All cities are considered to exist in hexes that are otherwise clear.

10.6 Rough Terrain

Each rough hex costs most units two MP to enter.

10.7 Egyptian Pass Hexes

There are two passes through what would otherwise be rough terrain areas in Egypt: the Gidi Pass, which runs from 1725 through 1824 to 1924, and Mitla Pass, which runs from 1627 to 1926. Units of any nationality moving along those pathways may do so paying only one MP per hex.

10.8 Marsh or Salt Pan

The cost for entering any marsh or salt pan hex is three MP per hex for all units.

10.9 All-Sea Hexes & Hexsides

No movement or combat is allowed across or into these hexes and hexsides.

10.10 River Hexsides

It cost all units an extra MP to cross a river hexside. "Extra" means one MP must be paid in addition to the cost for entering the hex on the other side of the river. For example, a unit crossing a river hexside into a rough hex would have to pay a total of three MP to make that one-hex move.

10.11 Suez Canal Hexsides

In order to move across a Suez Canal hexside, a unit must begin its side's movement phase already in one or the other of its bank hexes. From there it may move across to the other side, where its move ends for that phase.

Note that 1426/1525, 1426/1526 and 1218/1318 are canal hexsides. Also note ZOC do extend across canal hexsides and that advance after combat is allowed across it.

10.12 Cities

The cost for entering any city hex is one MP per hex for all units (but see 11.11 in regard to the entry of AIC units into Israeli cities).

10.13 Cumulative Costs

The total movement cost for entering any hex is always the sum of all the applicable costs.

10.14 Israeli Column Movement

Israeli units may double their MP whenever they conduct a move such that they don't start, enter anywhere along it, or end it in a hex containing an EZOC. The presence of other Israeli units in EZOC hexes doesn't serve to negate those EZOC for purposes of determining column movement eligibility. Also see 7.4.

10.15 Geographic Restrictions

Israeli units may potentially move and fight anywhere on the map, but AIC units are restricted — based on their nationality and inherent logistical and command-control considerations — as to where they may do so. Note that, as far as is allowed within the geographic boundaries given below, AIC units of different nationalities may launch multi-national attacks without suffering any penalty.

  • Russian, Iranian, Turkish & Syrian Units may only move and attack in Lebanon, Syria, Gaza, the West Bank, Jordan and Israel.
  • Egyptian Units may only move and attack in Egypt, Gaza, the West Bank and Israel.
  • The Chinese Unit may only move and attack in hexes immediately adjacent to both banks of the Suez Canal, the Great Bitter Lake and the Gulf of Suez.

11.0 Combat

11.1 In General

Attacks take place between adjacent opposing units during the combat phases in every player turn. Attacking is always voluntary; the mere fact of enemy adjacency doesn't necessitate your units launch attacks against those enemy units. Both players are always free to attack or not, as each chooses on a case by case basis, during each of his own combat phases in every turn throughout the game. The player whose combat phase it is, is considered the "attacker" and the other player is considered the "defender," no matter the general situation across the map.

11.2 Multi-Hex Attacks & Single Hex Defenses

An enemy occupied hex may be attacked in one battle by as many of your units as you can bring to bear from one, some or all the surrounding hexes; however, no more than one hex may ever be the object of any one attack.

11.3 Indivisibility of Units

No single attacking unit may have its attack factor divided and applied to more than one battle. Likewise, no defending unit may have part of its defense factor attacked by one or a few attackers while another part is attacked by other units. In general, no attacking unit may attack more than once per combat phase, and no defending unit may be attacked more than once per combat phase — but see 12.22 below for the important exception of Israeli "momentum attacks."

Source note: the cross-reference "12.22" in 11.3 is transcribed as printed; the momentum attack rule is 11.18.

11.4 Attack Sequencing

There's no arbitrary limit on the number of attacks each player may resolve during his combat phases. The attacker need not declare all his attacks beforehand, and he may resolve them in any order he wishes, as long as the resolution of one is completed before that of the next is begun.

11.5 Combat Procedure & Palestinian & Hezbollah Defense Factors

The attacking player should strive to have more attack factors involved in a battle than the defender has defense factors. Subtract the defending unit's defense factor and the attacker's total of AF. That number is the "combat differential."

The defense factor of every Hezbollah and Palestinian static unit is determined by die roll each time its attacked. That is, to determine the defense factor of one of those units, the AIC player should openly roll a die to get a result of one through six for each such defense.

Also note all normal terrain and other combat considerations are taken into account in these static defenses.

11.6 Combat Results Table (CRT) Limits

Note: the column headings on the CRT range from "0" to "≥30." Find the column heading that's closest to the combat differential that was just calculated according to rule 11.5 above. For example, if your attacking force contains 5 attack factors, and the defending force contains 3 defense factors, that battle would be resolved — unless column shifts were also involved; see below — using the "+2" column on the CRT.

In cases in which the calculated differential doesn't quite make it to a column, even if it's just one point short, use the lower column. For example, if an attack had an exact calculated differential of +9, that battle would be resolved using the "+5" column.

11.7 Combat Column Shifts

Combat differentials may be shifted by the terrain in the defender's hex as well as by other factors described below. All applicable shifters are cumulative in their effect. That is, in every battle, all applicable shifts are combined to get one final left or right shift. Leftward shifts favor the defender; rightward shifts favor the attacker.

11.8 Clear Terrain

Units defending in clear hexes devoid of all other terrain features derive no benefit to their defense for terrain.

11.9 Rough Terrain

Units defending in rough hexes receive a one-column-left (1L) shift on that account. The presence of a pass in rough hex doesn't negate this shift.

11.10 Lakes & Seas & Rivers & Canals

No combat is allowed across all-lake or all-sea hexes and hexsides.

If all the units taking part in an attack are coming across river hexsides, shift the combat differential one column left on that account. If one or more attacking units are coming across a non-river hexside, this defense benefit is thereby lost.

If all the units taking part in an attack are coming across Suez Canal hexsides, shift the combat differential two columns left on that account. If one or more attacking units is coming across a non-canal hexside, this defense benefit is thereby lost.

11.11 Cities & Israeli Intrinsic Garrisons

Shift the odds two columns leftward (2L) when attacking any defenders in a city. Further, the concentric assault attack-bonus shift (see 11.13 below) is never available when attacking into any city.

Also note all Israeli cities have an intrinsic defensive garrison that contains one step and has a DF of one. The garrisons never attack, nor do they exert ZOC. Further, whenever an Israeli mobile unit is in an Israeli city, its intrinsic garrison is totally ignored and the defense of that place rests solely on that mobile unit. Israeli mobile units in Israeli cities do exert ZOC normally.

Note: the rule above means AIC units may never simply move into any Israeli city; they may only do so as an advance-after combat (see 11.17 below).

11.12 Israeli Airpower Combat Support

See 6.5 for details on battles conducted within range of an Israeli Airpower marker.

11.13 Concentric Attack

In general, if a defending hex is attacked by units in opposite hexes, or by units from three surrounding hexes with one hex between each and the next attacker-occupied hex, or by units from more than three hexes, that attack may be eligible to receive the "concentric attack" rightward column shift bonus. The shift bonus is one column right (1R) for Israeli attacks against Chinese or Russian units, and two right (2R) for Israeli attacks against all other AIC units. The shift is 1R for all AIC concentric attacks.

The concentric shift is never awarded for attacks by either side into any city. Note this rule doesn't prohibit you from attacking into cities from multi-hex positions that would otherwise award you the bonus; you just don't get to apply it.

11.14 Final Combat Resolution

After all applicable shifts have been applied, the attacker rolls a die and cross-indexes that result beneath that proper differential column on the CRT to get a "combat result." For example, a result of "3" rolled for an attack made under the "+15" column yields a result of "1/3."

11.15 Combat Results

Results are given exclusively in terms of steps lost by the involved forces in each battle. Results to the left of the slash apply to the defender and those to the right of it apply to the defender. In the example above, the attacking player would be called on to remove one step (grand total) from among his attacking force and the defending player would be called on to remove (grand total) three steps from his defending unit.

Source note: rule 11.15 as printed says that results to the right of the slash apply to the defender. Its own example (attacker loses one step, defender loses three) and the combat results convention indicate the right-hand figure applies to the attacker; this is transcribed as printed and is not corrected here.

Every battle is fully resolved as a discrete event. There's never any carry over of extra unabsorbed step losses from battle to battle or phase to phase.

Note: in the case of Israeli intrinsic city garrisons, there's no actual unit-counter that needs to be removed. Any defender combat result of "1" or more eliminates the garrison and, provided one or more steps of involved AIC attackers remains on the map, an advance after combat would thereby end the game under the provision of rule 4.2. In the rare case when a garrison factor and its entire attacking AIC force are eliminated within their overall combat result, no advance takes place and that city's intrinsic garrison would be considered back in place during later turns' combat phases.

11.16 Apportioning Losses

Within the strictures given above, both players are free to apportion their own side's step losses among his involved attacking units as he sees fit.

Note, however, in defenses by Israeli mobile units in Israeli cities, if that mobile unit is fully eliminated the intrinsic garrison factor doesn't then spring into existence in the instant between the mobile unit's destruction and the possible advance after combat of the victorious AIC attacker(s).

11.17 Advance-After-Combat

At the end of every attack, whenever the defender's hex is left empty of all units, the victorious attacking units may advance-after-combat into that hex. Stacking limitations must be observed. Such advances aren't part of normal movement; they don't cost any MP, but advancing units must still observe normal terrain prohibitions. EZOC don't block advances after combat.

Advancing-after-combat is an option; it's never mandatory; however, the decision to advance must be made immediately after the battle is resolved and before that of another is begun. It's not necessary for advancing attackers to stack-full the newly won hex; the victorious player may send just one or a few units. There's never any defender advance-after-combat; victorious defenders simply hold in place.

11.18 Israeli Momentum Attacks

Israeli attacking units that advance-after-combat may attack again immediately (Israeli player's choice), but such "momentum attacks" are always resolved as only one hex of attackers versus one hex of defenders. Further, the option to launch such an attack must be exercised immediately, prior to starting the resolution of any other battle. This is the exception to the one-combat-per-phase general limit given above in 11.1.

Also note there are never any serial momentum attacks. That is, even if a given momentum attack is successful in clearing another defended hex, and that victorious attacking unit advances-after-combat again, it would then not be allowed to make yet another momentum attack that same phase.

Finally, also note the Israeli 1R shift for prepared assaults is never available for momentum attacks, no matter the phase sequence in use. In all other ways, momentum attacks are resolved as normal combat.

11.19 Israeli Probing Attacks

If an Israeli mobile unit is located such that it's immediately adjacent to one or more hexes containing AIC units and other hexes that contain only AIC ZOC, the Israeli player may decide to attack into an empty-but-EZOC-containing hex in a procedure known as a "probing attack."

Probing attacks are conducted using the same general procedures as regular attacks, with the important exceptions no differential calculation process is undertaken and neither side can suffer any step loss. Instead, the Israeli player simply announces the probing attack and then makes an advance-after-combat into the probed hex.

Momentum attacks may be conducted as probing attacks, and the advance resulting from an initial probing attack may be used to create the opportunity for a momentum attack. Note, though, no Israeli unit may make more than one probing attack and one momentum attack, in either order, per Israeli Combat Phase or under the provision of rule 7.5.

Israeli units that used column movement (see 10.14) during a turn in which its side used the move-fight sequence may not make a probing attack any time that turn. Similarly, Israeli units that make a probing attack during a turn in which their side used the fight-move sequence may not use column movement that turn.

  • 2.13 Hezbollah & Palestinian Static Forces
  • 2.14 Other Marker-Counters
  • 10.13 Cumulative Costs
  • 10.14 Israeli Column Movement
  • 10.15 Geographic Restrictions
  • 11.12 Israeli Airpower Combat Support
  • 11.13 Concentric Attack
  • 11.14 Final Combat Resolution
  • 11.15 Combat Results
  • 11.16 Apportioning Losses
  • 11.17 Advance-After-Combat
  • 11.18 Israeli Momentum Attacks
  • 11.19 Israeli Probing Attacks