Red Eagles: Air War over the Kuban Peninsula, 1943
Red Eagles: Air War over the Kuban Peninsula, 1943 Rulebook
Table of Contents
Table of Contents
- 1.0 COMPONENTS
- 2.0 INTRODUCTION
- 3.0 THE MAP
- 4.0 CHARTS
- 5.0 TARGET SHEET
- 6.0 AIR UNITS
- 7.0 GROUND UNITS
- 8.0 CAMPAIGN CARDS
- 9.0 PLAYERS
- 10.0 HOW TO PLAY
- 11.0 THE CAMPAIGN CARDS
- 12.0 REINFORCEMENTS & REFITS
- 13.0 REDEPLOYING
- 14.0 STACKING
- 15.0 AIR BASING
- 16.0 SORTIES
- 17.0 HOW TO FLY UNITS (MOVEMENT)
- 18.0 AIR TO AIR COMBAT
- 19.0 ANTI-AIRCRAFT (AA) FIRE
- 20.0 BOMBING
- 21.0 STRAFING
- 22.0 FOG OF WAR
- 23.0 RADAR
- 24.0 HEADQUARTERS UNITS
- Scenario: Red Eagles
- Air Superiority Combat Results Table
- Bombing Combat Results Table
1.0 COMPONENTS
This Mini Game is complete if it includes: 40 game pieces (units), 18 campaign cards, one 11x17" map and this rules & scenario sheet.
If any parts are missing or damaged, please write to: Decision Games, Mini Games Support, PO Box 21598, Bakersfield, CA 93390-1598.
Please register this game purchase on-line at: www.decisiongames.com
Players will need to provide themselves at least one die (two per player is ideal) to play the game. Players will also need a pencil and paper to record various game functions.
2.0 INTRODUCTION
Air Wars is a wargame system of air campaigns. There are two players, designated by the scenario. Each player has his own game pieces, called "units," representing formations of aircraft and air defense forces. Players move their units, conduct air-to-air battles, and bomb ground targets in an attempt to win the scenario.
Each player has a set of Campaign Cards. Players use the cards to take special actions (to be explained later).
This booklet is the "system rules." These are used for all air warfare games of this series. The scenario sheet gives the rules for the specific game being played.
The following game terms are defined as follows.
Enemy. All units belonging to the other player.
Friendly. All units belonging to you.
Pick at Random. Choose by making a random (blind) draw of a card or unit.
Select. Deliberately choose a card or unit of your choice.
3.0 THE MAP
The game map shows the theater of operations in which the actual campaign took place. The map has the following features:
Grid. These are the square spaces. The specific types of grid squares are shown in the scenario rules and on the Terrain Effects Chart. Units are placed and then moved on the grid.
Reinforcement Box. Place units here that are not yet in play but are scheduled to appear.
Abort Box. Place units here that have received "Abort" results in combat.
Command Level. This indicates the current command level for an air force. This determines the number of cards to be drawn and the air stacking limit for that air force. This can potentially change during the course of a game.
Damage Box. Place units here that have been destroyed via combat (or other game actions). They are out of play, but can potentially be returned via refit (see below).
4.0 CHARTS
The map includes several charts.
Combat Results Tables (CRT). The CRT is used to resolve air combat, anti-aircraft (AA) fire and bombing attacks.
Terrain Effect Chart (TEC). The TEC shows the effects of the various map grids.
Turn Record Track. The Turn Record Track is used to record the current day and hour with the Turn marker.
5.0 TARGET SHEET
This lists the various targets on the map. As targets are bombed, players should make note of it with pencil. Players can photocopy the Target Sheet for game use.
6.0 AIR UNITS
There are three basic types of air units in the game: bombers, fighters and decoys. Certain games will have additional special units.
The printed numbers on the game pieces are, from left to right.
Air Combat Value. This is the number of combat dice that the unit is eligible to roll (fire) when engaged in air-to-air combat.
Bomb Value. This is a number of bomb symbols. It is the number of bombing dice the unit can roll when attacking (dropping bombs on) a ground target.
Speed. This is how many grids the air unit can move (in one hour). If the number is parenthesized, then the unit is short ranged, which means that it must land at a friendly base during the following turn after it has launched.
Backprinting. The reverse of the counter shows the air unit when it is based (landed at an airbase or aircraft carrier).
Identification. This is the unit type, which determines specific unique capabilities, as explained later. They are:
- B = Bomber
- F = Fighter
- FB = Fighter Bomber
- D = Decoy
Some units will have a number following the type, representing the unit's historical formation (or an ahistorical numbering system).
7.0 GROUND UNITS
Ground units represent installations and defenses.
Antiaircraft unit. Antiaircraft units (AA) are printed with an anti-aircraft value.
Headquarters unit. HQ units enhance certain game functions.
7.1 Backprinting
The reverse side shows the ground unit in its fog of war status.
8.0 CAMPAIGN CARDS
Each player is provided with a set of Campaign Cards. See 11.0 for details.
9.0 PLAYERS
There are two players in the game, called the Intruder and Interceptor; these terms are used simply to distinguish between the two players. Both sides generally function in the same manner, though they may have different mixes of forces.
10.0 HOW TO PLAY
The game is played in game turns called "Days." Each turn will be subdivided into a Planning Phase and an Operations Phase. Each of these phases is further sub-divided into segments to regulate game activities.
10.1 The Sequence of Play
During each turn, players must follow the Sequence of Play. Each day turn consists of the following.
A. Planning Phase
- Campaign Card Pick. First the Intruder player and then the Interceptor player picks a number of campaign cards equal to their command level from their deck.
- Reinforcement. First the Intruder player and then the Interceptor player places any units designated as a "reinforcement" for the scenario, or "refits" units onto the map. Next, they place all units and decoys from the Abort Box onto the map.
- Redeploy. First the Intruder and then the Interceptor player move their ground units. They then move their air units to any friendly air base(s). This is at the players' option.
Note: The Planning Phase is conducted only once per day. Once completed, players proceed to the Operations Phase.
B. Operations Phase
- Intruder First Hour. a) Flying. The Intruder player moves his air unit(s). b) Air Combat. The Intruder player initiates any air-to-air combat. c) AA. The Interceptor player fires antiaircraft at Intruder aircraft (if in the same grid square). d) Bomb. The Intruder players makes any bombing and/or strafing attacks.
- Interceptor First Hour. The Interceptor player does all of the following, in this order: a) Flying. The Interceptor player moves his air unit(s). b) Air Combat. The Interceptor player initiates any air-to-air combat. c) AA. The Intruder player fires anti-aircraft at Interceptor aircraft. d) Bomb. The Interceptor players makes any bombing and/or strafing attacks.
- Intruder Second Hour. The Intruder repeats the same exact steps listed under step "1" above.
- Interceptor Second Hour. The Interceptor repeats the same exact steps listed under "2" above.
- Continue. Repeat the Intruder and Interceptor hour procedures above to complete a full turn as designated by the specific scenario. Players can also end a turn by mutual agreement if they have landed all aircraft, and do not intend to fly any more this turn.
Example: A scenario might have five days and each day would have six hours. This would mean that the game would have a total of five turns, each composed of one Planning Phase followed by an Operations Phase of six hours.
11.0 THE CAMPAIGN CARDS
During the Planning Phase, Campaign Cards are picked and played per the following rules.
11.1 Picking
During the Campaign Card Pick segment, players randomly pick campaign cards from their respective decks. Each picks a number of cards up to their current command level, as indicated by the scenario. Examine the cards, but do not reveal them to the enemy.
11.2 Playing
Each card will state the phase of the day during which it can be played. When playing a card, it is shown face up, and its effects are implemented per the instructions.
Note: If a card says "Immediate", then it must be played as soon as it is picked. Otherwise, a card is not required to be played immediately.
Any number of available cards can be played during a turn, but only during the indicated phases.
11.3 Disposition
Disposition indicates what happens to the card after being played.
Discard. After playing, place the card face up to one side. It is permanently out of play.
Permanent. After playing, the card is placed face up and remains in effect for the remainder of the game. It is never reshuffled.
Reshuffle. At the end of the phase in which it is played, shuffle the card back into the deck.
Note: You may hold unplayed cards from turn to turn, and play them later in the game. There is no limit to the number you can hold.
11.4 Card Actions
The action of each card is self-explanatory, but the following details are noted:
Combat Bonus. This gives the player additional die rolls when conducting certain types of combat. All such bonuses are cumulative.
Special Cases. If the card contradicts the rules, then the card takes precedence.
Wild Cards. Certain cards will have "Wild Card" printed on them. A player can play them either individually for their normal function, in which case they're reshuffled, or played simultaneously to invoke the wild card effect.
Note: If you play all of them simultaneously, then do not use them for their normal function. Instead, you get the Wild Card effect (described on the card or the scenario rules). All Wild Cards must then be discarded.
12.0 REINFORCEMENTS & REFITS
Various game events will call for reinforcements. These are units that were not initially deployed on the map. The actions which generate reinforcements are listed as follows:
Scenario. A scenario may specify reinforcements appearing on certain turns.
Cards. A card may specify reinforcements appearing under certain circumstances.
Refits. Certain cards will allow you to refit damaged units. To refit, take the unit from the Damage Box and place it as a reinforcement.
Aborts. Units in the Abort Box are automatically restored to play in the Reinforcement Phase. This requires no card.
Decoys. Any decoys revealed and removed from the map in a turn are automatically returned to play as reinforcements on the turn following.
12.1 Placing Reinforcements
Air units are placed on friendly airbases. Ground units are placed on friendly ground space.
13.0 REDEPLOYING
During Redeployment, players can move their air units to any other friendly airbase. Players can also move ground units to any other friendly ground space. This is the only time when ground units can be moved.
14.0 STACKING
Stacking is having more than one unit in a grid. You can place your units in a stack in any order, per the following restrictions.
Ground Units. Ground units may be placed in any type of ground grid (but never in any all-water space). Up to one of each ground unit type may be placed in a ground grid.
Air Units (on the ground). Air units which are based on the ground (at a base) may be stacked up to the airbase's capacity, which is printed on the grid in each such space.
Example: An airbase with a capacity of "2" could base two air units.
Air Units (in the air). Air units in the air may be stacked up to that side's Command Level. This may be any combination of air unit types. Stacking only applies at the end of movement. Thus, a player can fly through other friendly air formations in excess of the Command Level limit.
Note: If Command Level changes in the course of an hour, then the player must immediately abort any air units that are in excess of stacking limits.
14.1 Mutuality Exception
Air units in the air are not counted against the stacking limit of air units on a base, and vice versa.
Example: A player has a command level limit of 3. This means he could have three air units in the air, even if there are also two air units at a base.
Air units in the air are not affected by enemy air units at a base in the same grid—they can even move through them without restriction. However, such moving air units may be susceptible to AA fire if they end their movement in a grid space where AA is present.
14.2 Engaging
Air units may enter grids containing enemy air units in the air, but must stop there. Both sides can stack up to their own Command Level limit in the same grid.
Example: The Intruder has a command level limit of "2", and the Interceptor of "3". Thus, there can be up to two Intruder air units, and three Interceptor air units in that same grid.
15.0 AIR BASING
Each airbase can base a number of air units per the number printed in its grid. All air units start each turn in airbases. This is indicated by placing them face down.
15.1 Taking Off
An air unit takes off by simply flipping it face up, indicating that it is in the air. It can then move (or simply stay in place over the airbase).
15.2 Landing
An air unit lands by moving into an airbase grid, and then flipping it over. Air units can land at any friendly airbase grid, if not in excess of the airbase's printed stacking limit. An air unit which does not land by the end of the turn is eliminated (place in the Damage Box).
Based (landed) air units may never use their combat strengths, nor may they move. But, they may be attacked by enemy bombers and/or fighters in the same grid space (though they cannot fire back).
16.0 SORTIES
All air units are printed with either a parenthesized or an un-parenthesized speed value, explained as follows.
16.1 Short Range Aircraft
These have a parenthesized speed value. They fly from a base during one hour. By the end of the next hour, they must land. If they do not land by the end of that next hour, they crash and are placed in the Damage Box. Each short range aircraft can fly any number of missions per turn, effectively flying a mission every other hour.
Example: A short range fighter unit takes off on turn 1, lands on turn 2, takes off again on turn 3, lands on turn 4, etc.
16.2 Long Range Aircraft
These have un-parenthesized speed value. These can stay in the air any number of hours, although they must land by the last hour of the turn or they crash. Each long range aircraft unit can fly one mission per turn. They can take off on any hour, fly any number of hours, and then land during any subsequent hour. Once landed, they cannot fly again during that same turn.
16.3 Sortie Optional
A player does not have to fly aircraft. Aircraft can remain on the ground for an entire scenario for whatever reason.
17.0 HOW TO FLY UNITS (MOVEMENT)
A player can move some, none or all of his air units each Flying segment. A player can move his air units, up to their limit (in spaces) of their printed speed value. A player can move his air units only via the sides of grids, not diagonally.
Each air unit can be moved a number of grids, from zero up to its speed value. Multiple air units may be moved together as stacks.
After a player has moved a piece and withdrawn his hand from it, its current movement is over.
17.1 Engagement (Air)
Air units can enter a space containing flying enemy air units. Those air units must stop, and this will trigger Air to Air Combat (see below) unless only bombers are present.
17.2 Engagement (Ground)
Air units can enter a space containing enemy ground units or based air units. This does not require them to stop. Air units can move through spaces where ground unit or based air units are present.
Note: Ground units, of course, can't move during a Flying segment. They can only be moved during redeployment.
18.0 AIR TO AIR COMBAT
Air to air combat occurs during a player's Air Combat segment. All friendly aircraft in the air in the same grid with enemy air units in the same air must engage in air to air combat. The player whose hour is in progress is termed the "attacker," while the other player is the "defender." Air to air combat is resolved on a grid by grid basis, using the Air Superiority Combat Table.
Example: It is the Intruder's hour, and the Intruder moves two long range fighters into a grid space where there are two Interceptor fighters in the air. The Intruder is thus the "attacker."
18.1 Air Superiority Combat Procedure
The attacker resolves each combat individually, and finishes each combat before proceeding to the next one. These are resolved in any order the attacker chooses. Each combat must go through the following stages.
- Attacker Combat Strength Determination. The attacker totals the air combat strength of all air units in the battle.
- Defender Combat Strength Determination. The defender totals the air combat strength of all air units in the battle.
Note: Certain cards can increase or decrease combat strength. These are cumulative, but if a unit has a value of one or more, it may not be reduced to zero.
- Fire. Each player simultaneously rolls a number of dice equal to the totals from above. Then they consult the Air Superiority CRT (see below).
Note: Fighters and bombers each utilize a separate CRT. If there are enemy fighters and bombers present in a grid space, total their values separately. If both sides have only bombers present in a grid space, no combat occurs there.
- Loss Extraction. Each player must remove any losses called for by the CRT.
18.2 Explanation of Combat Results
Abort. One enemy air unit is placed in the Aborted Box. An aborted unit is out of play for the remainder of the turn (day or month). It is automatically received as a reinforcement on the turn following. If a unit suffers more than one Abort, there is no additional effect.
Kill. One enemy air unit is shot down (destroyed). Place it in the Damage Box. It may be redeployed only via a card that allows Refit.
18.3 Loss Procedure
A player can choose which friendly units will take the losses. Any type of units involved in the combat may be chosen.
Priorities. All "kill" results must be removed before aborts.
Excess Losses. If more losses are suffered by a player than he has units involved in combat, there is no additional effect.
Example: The Intruder has one fighter and two bombers in a combat. During combat, he suffers one abort and one kill. He could kill one bomber and abort one fighter, or kill one bomber and abort the other bomber, etc.
18.4 Post Combat
Any surviving air units in a space remain in place. There is only one "round" of combat per air superiority segment. Air units can move off or reengage in their following flying phase.
19.0 ANTI-AIRCRAFT (AA) FIRE
During the AA phase, a defending player can (but is not required to) fire anti-aircraft at enemy air units in the same grid. A game may include two types of anti-aircraft: AA units and map-printed AA (values printed on the map, usually with airbasing values). Both function the same.
Editor's note: the Red Eagles scenario errata states that the AA CRT cited in this section is now part of the Air Superiority CRT. AA fire is therefore resolved on the AA Firing on Aircraft column of the Air Superiority Combat Results Table (see the scenario sheet).
Anti-Aircraft Fire Procedure
- The defender flips face up any anti-aircraft units he wants to fire.
- Total all AA values in a grid space. AA.
- Roll one 6-sided die for each combat factor of AA in the grid space. Use the AA CRT to determine losses.
Note: AA can only fire at air units that end their movement in the same grid space (not just passing through) during a player's own AA phase. Air units cannot fire back at any AA.
20.0 BOMBING
Each bomber may (but is never required to) conduct one bombing mission per turn. Bombers that have bombed must be rotated diagonally to indicate that they have no more bombs.
A player conducts bombing during his Bombing phase. The bombing air unit(s) must occupy a grid space with an eligible enemy target (see the Bombing CRT for the scenario). Reveal all bombers and enemy units and installations in that same grid. The bombers are considered to be the attacker, the targets are the defender.
20.1 Bombing Procedure
The attacker resolves each bombing attack individually, and finishes each attack before proceeding to the next one. These are resolved in any order the attacker chooses. Use the Bombing CRT. For each bombing attack:
- Designate the target. Each bomber can attack one target in the grid. This can be a printed target, or one ground unit, or one based air unit. If there is more than one bomber, they can be combined against a single target, or split up among different targets. You have to designate targets before rolling dice.
- Roll one die for each bomb strength point. See the Bombing CRT for outcomes. Apply outcomes immediately.
Note: Certain cards can increase or decrease a bomber's bombing strength. These are cumulative, but if a unit has a value of one or more, it may never be reduced to zero.
20.2 Bombing Results
If a "Target Bombed" result occurs, then, if the target is a unit, remove it from the map and place it in the Damage box; if the target is a printed installation, it is destroyed—make a notation of this on the Target Roster.
20.3 Target Status
Once a printed target has been bombed, it remains useless for the remainder of the game. An eliminated ground unit may be Refit. Some scenarios may state exceptions.
Note: Only those map features specifically stated as potential targets on the Terrain Effects Chart may be bombed.
21.0 STRAFING
Fighter units can attack based enemy air units, which is done in the same manner as the bombing of based air units (see above), except the fighters roll only one die per unit, regardless of strength. Fighter-bomber type air units can bomb or strafe, but never both during the same hour. Fighter type units may never strafe ground units or installations.
22.0 FOG OF WAR
A player may always examine his own units, but cannot generally inspect enemy stacks, except by play of a pertinent card, or when combat commences, or via radar. A player can always examine the top enemy unit in a stack. Face down enemy units may also be revealed during combat or via card.
Air stacks are revealed in their entirety if they enter any grid space with any other enemy unit or map-printed installation.
Any unit that is revealed remains so for the remainder of that same day. All units are flipped face down at the start of the next Redeployment Phase.
22.1 Decoys
Decoy units are air units in every respect, but have no combat capability (and they do not interrupt enemy movement). They reveal enemy units just the same, or can be used within a friendly stack to deceive the enemy as to that stack's actual size. Once any decoy is revealed it is removed from the map, and placed into the Abort Box. Decoy units in the Abort Box are automatically received as reinforcements each Reinforcement Phase.
22.2 Air Recon
Decoy units may move into spaces containing enemy units, and in so doing, cause them to be revealed. This also reveals the decoy, and causes its removal.
23.0 RADAR
One or both sides may have radar. The extent of radar cover is shown by a printed radar line on the map. The owning player may examine all flying enemy units within his radar cover. If the radar line is even slightly printed in a grid, it is considered a radar grid.
24.0 HEADQUARTERS UNITS
One or both sides may be assigned headquarters type units. These are ground units; their functions are described in the scenario rules.
Scenario: Red Eagles
Scenario rules for Red Eagles: Air Battle for the Kuban Bridgehead. The scenario sheet's printed errata are applied in place.
25.0 INTRODUCTION
Important: AA CRT cited in system rules is now part of the Air Superiority CRT.
Map Errata: Sarabuz square should have German airfield icon in the square.
Cards: Card 07 in the action section should say: All VVS fighters and fighter bombers.
26.0 FORCES
The scenario sheet's counter diagram labels the Identification, Aircraft Type, Air Combat Value, Bomb Value and Speed of a unit as described in section 6.0.
Intruder: Controls Soviet (red counters) air forces (VVS).
Interceptor: Controls Luftwaffe (grey) forces and Axis Allied air units (brown).
26.1 Fighter-Bombers (FB)
Units marked with an FB are fighter-bombers. At the start of each turn players may decide to use them as fighter or bombers. If used as fighters, place them with their front side up. If used as bombers, place them with their reverse side up. They cannot switch modes during a turn. If used as bombers, they can fly only one mission per turn.
Note: The ME-110 LFB is considered a long-range fighter/bomber and may stay airborne using the bomber procedures in either mode.
26.2 Ground Attack Aircraft (GA)
Units marked with a GA are ground attack aircraft. They function as bombers. On the first hour in the air they attack their target; on the next turn, they must land (or be destroyed). They can fly only one mission per turn.
27.0 GAME LENGTH
The game lasts five game turns (each turn representing two weeks of operations). Each game turn consists of a Planning Phase and Operations Phase. The Operations Phase is divided into 8 hourly segments. The game activities of one turn represent the events during a real-life two-week game turn period.
Scale: 1 grid square: 40 kilometers.
28.0 HOW TO WIN THE GAME
Each player gains Victory Points (VP) for certain game actions. At the end of the game, each player totals their VP. The Luftwaffe player subtracts his total VP from the VVS VP total. The result obtained determines the level of victory (28.1). Players will need to keep track of VP by placing an "X" next to each bombed target using the Target Roster at the end of the rules.
28.1 Level of Victory
| Result | Level of Victory |
|---|---|
| 13 or more | VVS Strategic |
| 0 to 12 | VVS Operational |
| -1 to -12 | Luftwaffe Operational |
| -13 or less | Luftwaffe Strategic |
28.2 VVS VP
The VVS gains two VP for each Luftwaffe air unit in the Damaged Box at the end of the game and the number of VP detailed in the Target Roster at the end of the rules.
28.3 Luftwaffe VP
The Luftwaffe gains one VP for each VVS air unit in the Damaged Box at the end of the game and the number of VP detailed in the Target Roster at the end of the rules.
29.0 HOW TO SET UP THE GAME
VVS player sets up first, followed by the Luftwaffe. Set up takes place in the redeployment segment of the first turn. Place the month marker in the Turn 1 (3-16 April 1943) Box.
29.1 VVS
VVS Command Level: Start at two; maximum is four.
VVS Territory: All land spaces (full or part) east of the front line.
VVS Deployment: On any VVS airbases: 3 x LA-5, 2 x Yak, 4 x Pe-2, 2 x Sturmovik. Pick at random three Lend Lease (LL) air units as part of initial deployment.
Reinforcements Box: All remaining VVS air units. Cards will generate reinforcements. When called for, deploy reinforcements on any VVS airbases. Airbase capacity may not be exceeded.
Campaign Cards: Shuffle the VVS deck and place in a convenient spot to the side.
VVS Reinforcements: Consist of VVS air units, LL (Lend Lease) units and a long-range aviation (LRA) unit.
29.2 Luftwaffe
Luftwaffe Command Level: Start at three; maximum is four.
Luftwaffe Territory: All land spaces (full or part) west of the front line.
Luftwaffe Deployment: On any Luftwaffe airbases: 2 x Me109, 1 x Me110, 2 x FW190, 1 x Do217, 2 x He111, 1 x Hs123, 1 x Hs129, 2 x Ju87, 1 x Ju-88.
Reinforcements Box: All remaining Luftwaffe air units. Cards will generate reinforcements. When called for place reinforcements on any Luftwaffe airbases. Airbase capacity may not be exceeded.
Campaign Cards: Shuffle the Luftwaffe deck and place in a convenient spot to the side.
Axis Allies: The Axis allied units are reinforcements. These are treated as Luftwaffe units for all game purposes.
30.0 SPECIAL RULES
30.1 Command Levels
Command levels change due to cards. A player's command level may never be reduced to zero nor exceed the level given in 29.1 & 29.2.
30.2 Airbase Capacity
The number next to each airbase is both its air unit capacity and AAA value. The capacity is the number of air units that may be placed in each airbase. The number of aircraft that can launch from each airbase each hour, is based on that side's current command level. Any number of air units may land (up to airbase capacity) at an airbase.
30.3 VVS Airbase Counters
The VVS player may build airbases by playing cards. Place the counter on any square on the Soviet side of the front line. There can be a maximum of one airbase (printed or counter) per square. They are installations (7.0). VVS airbase counters have a capacity and AA value per the number printed on them. If all airbase counters are on the map when a card calls for an airbase(s), the VVS player may remove airfield(s) and place them in another grid square. No more than three airbase counters may be on the map at one time. An airfield may not be placed at Myashako.
30.4 Antiaircraft
All functioning airbases (printed and counters) have an AA value equal to their capacity.
30.5 Radar
The Luftwaffe player (only) has a radar line. He may examine all VVS units in grid squares west of the front line.
30.6 CRT
Both sides use the same CRT.
30.7 Targets
The VVS can bomb German ports, logistic installations and Luftwaffe airbases. The Luftwaffe can bomb Soviet ports, logistic installations and Soviet airbases (printed and counters). Both players can bomb battle grid squares when activated by a card.
30.8 Airbase Attacks
A player can attack enemy airbases (printed and counters). Each successful hit will eliminate or abort one enemy air unit on that airfield. The airbase itself will not be affected (its capacity is not reduced).
30.9 Wild Cards
If a player has two wild cards in his hand, he can play both during the reinforcement step of the Planning Phase. If played at the beginning of the turn, ignore the effects on the cards and implement the following.
VVS: Raise the VVS command level by one.
Luftwaffe: Raise the Luftwaffe command level by one.
Note: The Soviet Intelligence card can also raise the VVS command level by one. This does not require wild card play.
30.10 Ground Battle Cards
The Krymskaya Offensive, Blue Line and Operation Neptune cards will designate a grid square as a target. That grid square will be a target only if that card is face up. The card is discarded at the end of the next player's turn (so each player has a chance to bomb it). The card is discarded, the target does not appear again. Both players can bomb that grid square and gain VP.
30.13 Reinforcement Cards
Reinforcement cards will provide additional air units the first time they are picked. The second and subsequent times they are picked, they provide the number of refits listed on the card, not reinforcements.
30.14 Reinforcement Deployment
Deploy air unit reinforcements on friendly airbases. If a player has insufficient airbase capacity on the map, then excess air units are placed aside (and cannot be used). They can be deployed as reinforcements when there is sufficient capacity.
30.15 Luftwaffe HS129
The Henschel 129 was a special tank-busting aircraft. It can bomb battle targets and airbases. It may not bomb any other targets.
Editor's note: the printed scenario sheet numbers its special rules 30.1 to 30.10, then 30.13 to 30.15; there are no printed sections 30.11 or 30.12. The numbering is kept as printed.
Target Roster
| Target Name | VP | X |
|---|---|---|
| VVS Targets | ||
| Sevastopol | +6 | |
| Each Other Port | +2 | |
| Dxhankoi (Logistic Center) | +4 | |
| Operation Neptune (Myashako) | +6 | |
| Krymskaya | +4 | |
| Blue Line | +4 | |
| Luftwaffe Targets |
Air Superiority Combat Results Table
| Die Roll | Fighters Firing | Bombers Firing Defensively | AA Firing on Aircraft |
|---|---|---|---|
| 1-4 | — | — | — |
| 5 | Abort | Abort | — |
| 6 | Kill | Abort | Abort |
Bombing Combat Results Table
| Die Roll | Logistic Center | Port | Ground Battle | Based Air Unit |
|---|---|---|---|---|
| 1-3 | — | — | — | — |
| 4 | — | Bombed | Bombed | Abort |
| 5-6 | Bombed | Bombed | Bombed | Kill |
Abort: One enemy air unit is placed in the Abort Box. An aborted unit is out of play for the remainder of the turn. It is automatically received as a reinforcement on the next turn.
Kill: One enemy air unit is shot down. Place it in the Damaged Box. It may be redeployed only via a card that allows refit.
Bombed: Record the VP for bombing the Target. The target cannot be bombed by that player again for the rest of the game.