Par le feu, le fer et la Foi Rulebook

Table of Contents

Table of Contents

• 1. Description of the Game
  • 1.1 Game Components
  • 1.2 Game Scale
  • 1.3 Combat Units
    • 1.3.1 Description
    • 1.3.2 Quality Rating
    • 1.3.3 Combat Rating
    • 1.3.4 Movement Allowance
    • 1.3.5 Gun range
    • 1.3.6 Status of combat units
    • 1.3.7 Combat units
    • 1.3.8 Game markers
  • 1.4 Leaders
• 2.0 Setting up the Game
  • 2.1 Unit and Marker Placement
  • 2.2 Initiative
• 3.0 Game Turn
• 4.0 Movement Segment
  • 4.1 Description of Geographic Zones
    • 4.1.1 Types of Geographic Zones
    • 4.1.2 Types of borders
    • 4.1.3 Junction point
    • 4.1.4 Disorganization by movement
    • 4.1.5 Line of Sight
      • 4.1.5.1 Borders
      • 4.1.5.2 Junction points
      • 4.1.5.3 Blocking GZ
      • 4.1.5.4 Elevation
      • 4.1.5.5 Occupied GZ
• 5.0 Command Segment
  • 5.1 Chain of Command
  • 5.2 Command Radius
  • 5.3 Isolated Unit
• 6.0 Reaction Segment
  • 6.1 Reaction Principles
  • 6.2 Reaction Fire
  • 6.3 Reaction Charge
  • 6.4 Cavalry Withdrawal
    • 6.4.1 Cavalry Withdrawal in front of infantry units
    • 6.4.2 Cavalry Withdrawal in front of cavalry units
• 7.0 Combat Segment
  • 7.1 Combat Principles
  • 7.2 Combat Sequence
  • 7.3 Identification of the LA and LD
  • 7.4 Combat Modifiers
    • 7.4.1 Charge modifier
    • 7.4.2 Leader modifier
    • 7.4.3 Class modifier
    • 7.4.4 Support modifier
    • 7.4.5 Second attack modifier
    • 7.4.6 Terrain modifier
  • 7.5 Combat Results
    • 7.5.1 Results
• 8.0 Reorganization Segment
• 9.0 Victory Conditions
• 10.0 Advanced Rules
  • 10.1 Orders
    • 10.1.1 Principles
    • 10.1.2 Modification of an order
    • 10.1.3 Determination of the initiative
• 11.0 Optional Rules
  • 11.1 Caracole
    • 11.1.1 Caracole declaration
    • 11.1.2 Caracole resolution
  • 11.2 A Moment of Hesitation
  • 11.3 Hunger for Gold
  • 11.4 Les Enfants Perdus
    • 11.4.1 Generation of an Enfants Perdus unit
    • 11.4.2 Following Orders
    • 11.4.3 Les Enfants Perdus Movement
    • 11.4.4 Les Enfants Perdus Reaction and Combat

1. Description of the Game

This game simulates on a tactical scale the Wars of Religion that devastated the Kingdom of France during the second half of the 16th century. Each battle was chosen for its historical interest or because of its uniqueness. In order to stay true to the historical situation some scenarios contain forces that are not balanced; victory conditions will, however, allow players to play a balanced game. Players will need to make the best use of the specific capabilities of their fighting units in order to reach their objectives and achieve victory.

The rules include references to the designer's notes (DN henceforth) and examples recorded in the Examples booklet. Historical notes providing information about the units used in the game are also included in the Examples booklet.

Abbreviations:

• CC: Column Commander (or Infantry Colonel-General)
• CR: Combat Rating
• CW: Cavalry Withdrawal
• DS: Disorganization/Disorganized
• EF: Les Enfants Perdus unit
• GZ: Geographic Zone
• IS: Isolated
• LA: Lead Attacker
• LD: Lead Defender
• LG: Lieutenant-General (or Marshal)
• LoS: Line of Sight
• MP: Movement Point
• QR: Quality Rating
• QC: Quality Check
• RC: Reaction Charge
• RF: Reaction Fire
• SE: Supply Edge
• VP: Victory Point
• ZoC: Zone of Control

1.1 Game Components

This game box contains:

• This Rulebook
• The Examples booklet
• A Player Aid containing the main tables used in the game for quick reference
• Five scenario sheets
• Five maps depicting the battlefields
• Two and a half counter sheets for combat units, Leaders and game markers
• Two 6-sided dice

Rules are divided in three levels of increasing complexity:

• Basic rules provide the core mechanisms of the game;
• Advanced rules introduce the concept of orders. Players are put in the shoes of Commanders-in-Chief whose orders are more or less well understood and executed. They will thus have to anticipate not only their opponent's reactions and strategy, but the way their own troops react as well.
• Optional rules add further historic flavor to the game.

Scenarios also contain extra rules which address some aspects specific to each battle.

1.2 Game Scale

Combat units represent 100 to 500 men, or one or two artillery pieces. A Leader counter represents a commander, his staff and his bodyguard. A column represents a vanguard, a rearguard or the main body of the army, referred to as the Main Battle. (DN N°1)

A Geographic Zone's boundary is 300 to 500 m long.

A game turn represents about 20 to 30 minutes.

Each map represents a battlefield. Battlefields are divided into Geographic Zones, which are used to regulate movement and combat. Whilst on the map, a Leader or combat unit occupies a single Geographic Zone at any one time. Terrain features are shown as symbols on the map: relief, vegetation, streams, buildings, roads, etc.

1.3 Combat Units

1.3.1 Description

Combat units are characterized with several factors:

• Infantry and Cavalry units: the column the unit belongs to is identified by a colored frieze and circle; the battle's initial letter; the Combat Rating, the Army's color and the Unit's class (printed as "CR • class letter • MA", e.g. 3 • D • 4 for arquebusiers, 5 • E • 6 for gendarmes); the Quality Rating (printed in the colored circle); and the Movement Allowance.
• Artillery units: the column the unit belongs to is identified by a colored frieze and circle; the battle's initial letter; the Gun range; the Combat Rating; the Quality Rating; the Movement Allowance (always 0); the Army's color and the Unit's class (culverins, cannons).
• Les Enfants Perdus (optional rule): an identification number of the Arquebusiers' parent unit; Combat Rating, Quality Rating, Movement Allowance, Army's color, Unit's class (enfants perdus).

The initial letter of each battle is used to easily identify which counters are used:

• A: Arques
• C: Coutras
• J: Jarnac
• R: Roche l'Abeille
• S: Saint-Denis

Les Enfants Perdus units can be used in any battle.

The background color of the counter identifies the army's side: Huguenots, Catholics, Leaguers, Royalists.

The color of the circle around the Quality Rating and of the frieze that runs across the top of the counter identifies the column to which the unit belongs.

1.3.2 Quality Rating

This number is used to perform Quality Checks (QC). Quality Checks are used during reorganization, reaction fire, reaction charge, combat or movement. To perform a Quality Check the player rolls a D6 and compares the result to the Quality Rating printed on the unit in question. If the die roll is equal to or lower than the Quality Rating the Quality Check is successful. When performing a QC, a player can roll the die against the QR of a Leader (Lieutenant-General or Column Commander) instead of the affected unit's QR if both the unit and its Leader are in the same GZ (see 5.1 Chain of command). (DN N°2)

1.3.3 Combat Rating

• Units that fight at close quarters have their CR between brackets. They are generally armed with shock weapons (pole arms, etc). (Example: a shock unit, printed [5] • B • 3.)
• Units firing at close range have their CR between parentheses. They are primarily armed with firearms. (Example: a unit fighting with shot, printed (6) • A • 8.)

1.3.4 Movement Allowance

A unit's mobility is expressed as Movement Points (MP). During a turn, a unit can expend MPs up to its printed Movement Allowance to move from GZ to GZ or to mount or dismount (mounted Arquebusiers, for example).

1.3.5 Gun range

The gun range is the maximum distance, measured in GZs, at which an Artillery unit may fire (1, 2 or 3 GZ depending on the gun, which is either a culverin or a cannon). To determine this distance, count the GZ of the target unit but do not count the GZ occupied by the firing unit.

1.3.6 Status of combat units

A combat unit is either:

• at full strength (front side of the counter),
• at reduced strength (back side of the counter with a horizontal band), or
• eliminated.

When a unit loses a step, it is flipped from its full-strength side to its reduced-strength side. A unit is eliminated if it is already at reduced-strength or has no reduced-strength side (i.e. Argoulets units) and is required to lose a step.

The following are temporary states into which a unit may be placed:

• disorganized (DS)
• isolated (IS)

Effects of disorganization and isolation:

Disorganized unit:

Aspect	Effect
Combat	-1 to the unit's CR
Movement Allowance	Infantry: -1 MP; Cavalry: -2 MP
ZoC	Unit exerts no ZoC
Reactions (Cavalry Withdrawal (CW), Reaction Charge (RC), Reaction Fire (RF))	Forbidden
Charge	Forbidden
Support	Unit cannot provide support
Disorganization	A DS unit which is disorganized once again loses one step and removes its DS marker (DN N°3)

Isolated units:

Aspect	Effect
Combat	Unit cannot attack; unit can defend
Movement	Unit may move, but must do so toward one of its Leaders
Reactions (Cavalry Withdrawal (CW), Reaction Charge (RC), Reaction Fire (RF))	Allowed
Support	Unit cannot provide support
Reorganization	Forbidden

1.3.7 Combat units

There are several types of combat units. (see DN N°4 and historical notes)

• Infantry units: Landsknechts, Swiss pikemen, Other pikemen (Italians), militia, arquebusiers, arquebusiers fighting as Les Enfants Perdus.
• Cavalry units: gendarmes, chevau-legers, reiters, cuirassiers, Mounted Arquebusiers aka Argoulets (see 4.6), Dismounted Argoulets (the back side of the Mounted Argoulets counter).
• Artillery units: cannons, culverins.
• Train units: baggage.

1.3.8 Game markers

• Markers: Charge, Clash of Pikemen, Caracole, Disorganized, Isolated, identification markers for Les Enfants Perdus parent units, Time marker.
• Victory point markers (single number x1 and tens x10) for Huguenots, Catholics, Royalists and Leaguers.
• Orders: Attack, Disengage, Skirmish, March, Retreat, Reserve, Hold.

1.4 Leaders

Lieutenant-General (LG) and Column Commanders (CC) each command a single force (a column, with all units belonging to that column identified by the same color), however the LG is also the army's commander.

Leaders have two ratings:

• Quality Rating (QR)
• Movement Allowance (in MP)

Leaders may also possess a scenario-specific modifier (providing either a bonus or penalty). A Leader's scenario-specific modifier is explained on the scenario sheet: it may affect combat, movement, etc. (DN N°5)

On a Leader counter, the column to which the Leader belongs is identified by a colored frieze and circle; the counter shows the scenario letter, the Leader's name, Quality Rating and Movement Allowance. A star indicates a Lieutenant-General. A "B" indicates a bonus and an "M" indicates a penalty (as described on each scenario sheet). The front is the Lieutenant-General; the back ("Chef Colonne") is the column commander.

A Leader's QR and Movement Allowance are used in the same manner as that of a combat unit. When performing a Quality Check, a Leader's QR may be used in place of a combat unit's QR if both the affected unit and Leader are in the same GZ, regardless of what the Quality Check is required for (movement, combat, reaction, reorganization and so on).

A Leader is never DS but he can be eliminated. The reverse side of a Leader counter represents a standard Column Commander and is used to replace a historical Lieutenant-General or Column Commander should the Leader be eliminated (see 7.6).

2.0 Setting up the Game

2.1 Unit and Marker Placement

Placement: The scenario sheets indicate which units to use and where to place them on the map. When multiple Geographic Zones are indicated, players may choose between those Geographic Zones. Units belonging to the same column are identified by a circle and a frieze of the same color.

Stacking: Stacking limits are enforced during setup.

Position of units: the position of units in a GZ is only relevant during combat.

Place the time marker in the "1" circle of the turn track printed on the map.

2.2 Initiative

Each scenario sheet indicates which side has the initiative at the beginning of the game. The player with the initiative begins the game. Initiative reflects the strategic and/or tactical situation, allowing the side specified to begin the engagement. The player with the initiative begins all new turns and is referred to as Player A in the turn sequence below. Exception - see advanced rule 10.3 Orders and Initiative.

3.0 Game Turn

A game turn is composed of three phases, the first player's phase, followed by the second player's phase, and finally the end of turn phase. Each phase is divided into several segments. During a player's phase, that player is called the phasing player while the other player is the non-phasing player, irrespective of the tactical situation of the combat. A game turn is complete after each player completes his phase and the end of turn phase has been resolved.

Player A's phase (side with the initiative)

• Command segment
• Movement segment
• Reaction segment of player B: Cavalry Withdrawal, Reaction Fire, Reaction Charge
• Combat segment
• Reorganization segment

Player B's phase

• Command segment
• Movement segment
• Reaction segment of player A: Cavalry Withdrawal, Reaction Fire, Reaction Charge
• Combat segment
• Reorganization segment

End of turn phase

• Victory check
• Advance of the time marker

The following sections explain the various sequences of a game turn.

4.0 Movement Segment

Combat units and Leaders each begin this phase with a number of Movement Points (MP) equal to their printed Movement Allowance. Disorganization affects a unit's Movement Points (see 1.3.6) at all times. Each turn, combat units or Leaders can spend Movement Points to perform movement.

The following actions are considered movement:

• Moving from one GZ to another GZ;
• Mounting or dismounting Argoulets units;
• Cavalry Withdrawal during a reaction segment.

Reaction Charge, advance before or after combat, and retreat after combat are not considered movement. Artillery and Baggage units can never move (DN N°6). Movement is always voluntary.

Movement Points cannot be saved from one turn to another: unspent MPs are lost. Movement Points cannot be transferred from one unit (combat unit or Leader) to another. A unit's movement must be fully completed before performing another unit's movement.

4.1 Description of Geographic Zones

The battlefield is divided into Geographic Zones (GZ). Each GZ contains the following information:

• The box's color indicates whether or not a GZ blocks the Line of Sight (see 4.1.5.3);
• The first number on the top left is the elevation of the GZ - 0 being the lowest elevation;
• The next two numbers are used to help identify each GZ;
• The Roman number at the bottom of the box indicates the type of the GZ.

GZ's that share a border are adjacent. When several borders intersect at a point (referred to as junction point), those GZ are also adjacent (for example Coutras GZ's 17,18,25,26 are all adjacent to one another). Units move from GZ to adjacent GZ. Units expend MP's when they enter a GZ. The MP cost depends on the GZ's type and border.

4.1.1 Types of Geographic Zones

Geographic Zones have various types used to model terrain. The GZ types are:

Type of Geographic Zone	Movement cost	Terrain type
GZ (I) Open terrain	1MP	meadow, field, park, hamlet
GZ (II) Difficult terrain	2MP	wood, orchard, grape vine, village
GZ (III) Very difficult terrain	3MP	town, fortification, dense forest, marsh, flooded zone, mountain
GZ (X) Impassable	Forbidden	river, lake

Road movement: if a combat unit or Leader moves entirely into successive Geographic Zones of type I or type II along a continuous road, it receives the following:

• +1 MP if it is an infantry unit,
• +2 MP if it is a cavalry or Leader unit.

Note: trails do not provide these modifiers. (The map shows roads, which give a movement bonus, and trails, which do not.)

4.1.2 Types of borders

Geographic Zones are separated from each other by borders. Moving from one GZ to another implies either crossing a border or moving across the junction point of two or more borders. A border affects movement depending on its type; some borders require the expenditure of additional MPs, others are impassable. The various types of border are:

• Dashed line: no additional cost.
• Single solid line (+1MP): a difficult obstacle - stream, hedge, ditch, ford, etc.
• Double solid line (+2MP): a very difficult obstacle - fence, wall, barricade, river, canal.
• Bold line (impassable): fortification, large stream.

4.1.3 Junction point

Sometimes the borders of several GZ's join at a point. This point is referred to as junction point. Units may move from one GZ to another across such a point. The additional movement cost to take into account is then the highest one among the borders merging at this point. The unit pays the MP cost of the most expensive border joining at a junction point. If an impassable border meets at this point, moving across it is forbidden.

4.1.4 Disorganization by movement

A unit may become disorganized (DS) as a result of the MP cost of entering a GZ.

• If a unit spends 3 MP, it must perform a QC. If the QC is successful, there is no effect. If the QC is failed the unit becomes DS and immediately applies all effects of disorganization (i.e. the Movement Point modifier is applied immediately).
• If a unit spends 4 MP or more, the unit automatically becomes DS and immediately applies all effects disorganization (i.e. the Movement Allowance modifier is applied immediately).

(Example 2: Normal move, moving along a road, moving into a ZoC and disorganization after movement - see Examples booklet.)

4.1.5 Line of Sight

Line of Sight (LoS) is used for artillery fire and reactions. To determine if a LoS is clear or blocked, draw an imaginary line between any point in the firing unit's GZ and the target's GZ. Line of sight is affected as follows:

4.1.5.1 Borders

A GZ's border color indicates whether the border blocks LoS or not. A yellow border does not block LoS while a brown border blocks LoS.

4.1.5.2 Junction points

A LoS can be traced through a junction point unless one of the borders is brown, in which case the LoS is blocked.

4.1.5.3 Blocking GZ

A GZ may block LoS. The color of the box contained within a GZ between the firer and target determines whether LoS is affected. If the box within a GZ is brown LoS is blocked. If the box is yellow, LoS is clear. LoS is not blocked if the firer's GZ contains a brown box, nor if the target's GZ contains a brown box.

4.1.5.4 Elevation

The GZ's elevation may block LoS, even if the GZ's box is yellow. Elevation blocks LoS in the following cases:

• At least one intermediate GZ* has an elevation higher than the GZ of both the firing unit and of the target unit.
• The firing unit's GZ is lower than the target unit's GZ.
• The target unit's GZ is lower and adjacent to the firing unit's GZ.
• The target's GZ is lower and at least one intermediate GZ* is at the same elevation than the firing unit's GZ.

(*): an intermediate GZ is a GZ located between the firing unit's GZ and the target unit's GZ.

4.1.5.5 Occupied GZ

When the firing unit's GZ, the target unit's GZ and intermediate GZ are all at the same elevation, and the target unit's GZ is at a distance of 2 or 3 GZ, any combat unit (friend or foe) present in any intermediate GZ blocks LoS**. In any other case, LoS is not blocked by units present in intermediate GZ.

(**): Leaders never block LoS.

(Example 3: Firing Range, Line of Sight and elevation - see Examples booklet.)

4.2 Zone of Control (ZoC)

All units except Leaders, Artillery and Baggage exert a Zone of Control (ZOC).

Units project a ZoC into all adjacent GZ that share a common, non-impassable, border. A junction point is sufficient as well to project a ZoC, unless an impassable border joins at this point.

All units entering a GZ within an enemy ZoC incur a +1MP cost to their move (DN N°7).

4.3 Stacking

The stacking limit defines the maximum number of units that can be placed in a GZ. Leaders and Les Enfants Perdus units never count towards the stacking limit. There is no limit to the number of game markers that can be placed in a single GZ.

Units of opposing sides cannot stack together at any time. However, Leaders and Baggage units do not prevent enemy units from entering their GZ. When an enemy unit enters such a GZ, any Leader or Baggage units present are eliminated.

Friendly units belonging to different columns may stack together.

The stacking limit depends on the GZ's type:

Type of Geographic Zone	Stacking limit
ZG (I) Open	4 units
ZG (II) Difficult	3 units
ZG (III) Very difficult	2 units
ZG (X) Forbidden	No unit allowed

This limit is enforced at all time, including during movement and retreats.

An easy way to remember the stacking limit is that the sum of the GZ's type (I, II, III respectively 1, 2, 3) and its stacking limit equals 5 (except for forbidden GZ).

(Example 4: Unit placement and stacking - see Examples booklet.)

4.4 Counter Position in a GZ

During combat, including Reaction Charge and Reaction Fire, units must be positioned in the GZ such as to easily identify the Lead Attacker (LA), the Lead Defender (LD) and their support units. Support units should be clearly positioned behind the LA or the LD. Players designate only one LA and LD per combat.

4.5 Reinforcements

Each scenario indicates the turn and GZ in which reinforcements arrive.

A reinforcement unit cannot enter the map if its entry GZ is occupied by an enemy unit. If an enemy unit exerts a ZoC into the entry GZ, the reinforcing unit must pay the additional MP cost caused by the ZoC. If a reinforcing unit cannot enter the map, it may enter at a later turn when its entry GZ is free of enemy units.

4.6 Mounted Arquebusiers, aka Argoulets

These are special cavalry units that can dismount and fight as Arquebusiers infantry units. Their counters show mounted Argoulets on their front and dismounted Argoulets on their back (front: 1 • F • 10; back: 2 • D • 4).

A mounted Argoulets unit is treated as a cavalry unit. A dismounted Argoulets unit is treated as an infantry unit. This distinction is of particular significance during the reaction segment.

Argoulets may mount or dismount only once per movement segment, as their last movement action, and must spend 2MP to do so.

The cost to dismount (2MP) must be expended from the allowance printed on the front side of the counter - mounted Argoulets. The cost to mount (2MP) must be expended from the allowance printed on the back side of the counter - dismounted Argoulets.

The 2MP for mounting or dismounting are added to the normal movement cost.

2MP is spent to mount or dismount regardless of whether or not the unit has moved.

The MP spent for mounting/dismounting must be taken into account when determining whether a unit becomes DS after it has entered the GZ.

A mounted unit with a DS marker that dismounts keeps its DS marker, and vice-versa.

(Example 5: Movement of mounted Arquebusiers - see Examples booklet.)

5.0 Command Segment

The status of a unit - in-command or isolated - is determined during this segment.

5.1 Chain of Command

A column is commanded either by a Column Commander (CC) or by the Lieutenant-General (LG) of the army.

A CC can only command units which belong to his column (identified by the same color). The LG can command units from his column and may also command units from other columns which are within his Command Radius.

Exception: only the column's Leader, either the CC or the LG, may change that column's orders (see 10.2).

Column Commanders act autonomously and need not lie within the Command Radius of the LG (DN N°8).

(Example 1: Command Radius, isolated unit and chain of command - see Examples booklet.)

5.2 Command Radius

A unit is either:

• In-Command: if it is within the Command Radius of its commanding CC or of the LG, the latter of whom can command any unit in his army;
• Isolated: if it lies outside the Command Radius of its commanding CC or of the LG. In this case, place an Isolated (IS) marker on the unit.

A Leader has a Command Radius of 3 GZ. Do not count the GZ of the Leader, but count the GZ of the unit which is checked.

The Command Radius can be traced through any GZ, border or junction point, except through type (X) GZ, impassable borders and junction points where an impassable border merges.

The Command Radius may not be traced through a GZ occupied by an enemy unit, but can pass through a GZ into which an enemy unit exerts a ZoC. (DN N°9).

Leaders and Baggage units never block the Command Radius of enemy Leaders.

5.3 Isolated Unit

During the phasing player's command segment, the command status of each his unit is determined.

Units which are isolated during the command segment remain so until the owning player's next command segment, even if they move back into a Leader's Command Radius in a later segment of the current turn. Conversely, a unit which is in-command and leaves the Command Radius of its Leader remains in-command and does not suffer from isolation until the owning player's next command segment.

Isolated units cannot attack, however they defend and perform reactions as normal.

Isolated units which are also DS cannot reorganize.

Isolated unit may move only if their movement puts the units closer to their CC or to the LG.

6.0 Reaction Segment

6.1 Reaction Principles

Reaction is always voluntary. During the reaction segment, the non-phasing player's units or Leaders may react to the movement of the phasing player's units into adjacent, empty GZ. Only units that moved into an empty GZ adjacent to enemy units during the previous phasing player's movement segment can trigger a reaction. Such a GZ is called Reaction Zone. If combat occurs during this segment, consider the phasing player the attacker and the non-phasing player the defender. Reaction may not occur in a GZ which contained the phasing player's units at the beginning of the prior movement segment. A reaction into a Reaction Zone is possible only if all conditions pertaining to the type of reaction in question are met.

Each of the non-phasing player's units can react only once per reaction segment. Each of the phasing player's units can trigger several reactions during the same segment.

The non-phasing player decides in which order his reactions are resolved. Each reaction must be completed before beginning the next one.

When there are several Reaction Zones, the non-phasing player decides which Reaction Zone a unit reacts to.

When checking whether a type of reaction is feasible, do not consider other units belonging to the non-phasing player that are in the same GZ. Units that are in the same GZ can perform different reactions.

If several units occupy the Reaction Zone, they must all be considered when verifying whether the reactions' conditions are met. For instance, Reaction Charge and Cavalry Withdrawal are not allowed if any unit in the Reaction Zone has an equivalent or greater Movement Allowance than the reacting unit. Likewise, if both infantry and cavalry units are in the Reaction Zone, a Cavalry Withdrawal only succeeds if the reacting unit passes a QC (because of the presence of cavalry units in the Reaction Zone).

Non-phasing units stacked together do not have to react together: if there are several eligible Reaction Zones, each non-phasing unit may independently choose which Reaction Zone it reacts to.

If a GZ is emptied following a Cavalry Withdrawal (CW) or a Reaction Charge (RC), any or all units of the Reaction Zone that triggered this CW or RC may advance into the emptied GZ. This advance before combat is not considered a movement. Movement Points are not spent and entering the emptied GZ cannot cause disorganization. However, advance before combat is only possible if the border or junction point the advancing unit(s) go through is not impassable.

A Leader can always withdraw toward an adjacent zone not occupied by an enemy unit. No QC is needed. Leaders do not have to withdraw toward the Supply Edge and can withdraw into enemy ZoC. This withdrawal is considered movement and as such must comply with movement rules (4.0).

Units that performed a reaction defend normally if they are later attacked during the phasing player's combat segment.

6.2 Reaction Fire

Only cavalry and infantry units which have a Combat Rating between parentheses - units possessing firearms - can attempt Reaction Fire (RF).

Any unit in a Reaction Zone may be targeted by non-DS units belonging to the non-phasing player that are capable of RF.

The non-phasing player designates the unit targeted by Reaction Fire. He thus designates both the LA of the phasing player (the target unit) and the LD (the unit attempting RF).

Reaction Fire requires the following conditions:

• The LoS between the reacting unit's zone and the Reaction Zone is not blocked
• The firing unit performs a QC

If the QC fails:

• The unit cannot fire

If the unit passes the QC:

• The LD (non-phasing player's unit) fires at the LA (phasing player's unit). The RF is resolved according to the combat rules (7.4.1).

6.3 Reaction Charge

A Reaction Charge (RC) is a combat action initiated by a unit belonging to the non-phasing player. It is not considered movement and thus does not follow movement rules (4.0).

Only cavalry units capable of shock attack - Combat Rating between brackets, can attempt a RC.

The non-phasing player designates both the LA (the unit targeted by the RC) and the LD (the unit attempting the RC).

The RC is resolved according to the combat rules (see 7.4.1).

A Reaction Charge requires the following conditions:

• The reacting unit has a greater Movement Allowance than the highest Movement Allowance of all units in the Reaction Zone. Reminder: the Movement Allowance of a DS unit is reduced.
• The LoS between the reacting unit's zone and the Reaction Zone is not blocked.
• The border between the reacting unit's zone and the Reaction Zone must be a dashed line. If the reacting unit charges through a junction point, all borders merging at this point must be dashed lines.
• The Reaction Zone must be a type (I) GZ.
• The reacting unit must successfully pass a QC, otherwise the RC is aborted.

6.4 Cavalry Withdrawal

Under certain conditions a cavalry unit may attempt to withdraw before combat. It may withdraw independently from other friendly units in the same GZ.

Cavalry Withdrawal (CW) is considered movement and thus follows the movement rules 4.0.

Cavalry Withdrawal must be performed toward the border of the map identified as the Supply Edge, as in 7.5.3.

Note: CW and Retreat do not follow the exact same rules. CW follows normal movement rules (4.0) while Retreat is a special movement done without spending MP, although impacted by borders and junction points.

6.4.1 Cavalry Withdrawal in front of infantry units

A cavalry unit may automatically retreat 1 GZ without performing any QC if only infantry units moved into the Reaction Zone.

6.4.2 Cavalry Withdrawal in front of cavalry units

A cavalry unit may retreat 1 GZ if a cavalry unit moved into the Reaction Zone on condition that:

• The reacting unit's Movement Allowance is greater than the highest Movement Allowance of all units in the Reaction Zone.
• The reacting unit's performs a QC; if the QC fails, the CW is cancelled.

(Example 6: Reactions: Fire, Charge, Retreat - see Examples booklet.)

7.0 Combat Segment

7.1 Combat Principles

Combat is always voluntary. Combat takes place between a unit belonging to the phasing player, called the Lead Attacker (LA), possibly supported by other units located in the same zone, and a unit belonging to the non-phasing player, called the Lead Defender (LD), possibly supported by friendly units in the same GZ.

Combat consists of both close quarters combat (for infantry and cavalry units) and artillery combat (see 7.8).

Close quarters combat may occur if the LA and the LD are in adjacent zones separated by a border or junction point which is not impassable. During close quarters combat, the LA never enters the LD's GZ. Each side's units must remain inside their zone until combat results are implemented. Thus movement rules (4.0) do not apply.

Similarly, no artillery fire is possible if the LoS between the LA and the LD is blocked.

Only units which are in-command may attack. Isolated units defend as normal.

A unit may attack even if it was the target of Reaction Fire or Reaction Charge in the reaction segment.

It is not possible to attack several GZ simultaneously, nor is it possible to coordinate an attack against a GZ from multiple GZ. However, a GZ may be attacked from several GZs successively.

A player may not select a GZ for attack more than once per combat segment. Units can only attack once per combat segment. Exception: Pikemen and Reiters may attack twice per combat segment (see 7.9 and 11.1)

Defending units may be attacked several times during the same combat segment, although in successive combats only.

The phasing player decides in which order to resolve his attacks. He does not need to declare his attacks in advance but may wait to see each attack unfolds before declaring a new attack.

Each combat must be completed before resolving the next one.

Combat results only apply to the Lead Attacker and the Lead Defender.

7.2 Combat Sequence

1. Identification of the LA and LD:
   • The phasing player designates the Lead Attacker.
   • The non-phasing player designates the Lead Defender.
2. Determine the CR modifiers of the LA:
   • Charge modifier
   • Leader modifier*
   • Class modifier
   • Order modifier (advanced rules)
   • Support modifier (except for Reaction Fire & Reaction Charge)
   • Disorganization
3. Determine the CR modifiers of the LD:
   • Second attack modifier
   • Leader modifier*
   • Terrain modifier: border type (most favorable for the LD if multiple options)** plus GZ
   • Order modifier (advanced rules)
   • Support modifier (except for Reaction Fire & Reaction Charge)
   • Disorganization

* If indicated in the scenario.

** In the battles of Saint-Denis and Arques: the modifier for the border with a double solid line (symbolizing a fence/barricade) only applies to the LD of the side which occupied the corresponding GZ at the beginning of the scenario. When combat occurs through this border, against a LD of the other side, this LD does not benefit from this modifier; treat the border as if it was a dashed line.

4. Compute the following difference: [LA CR + CR modifiers] - [LD CR + CR modifiers]
5. Resolve combat. The above difference determines the column to use on the Combat Result Table (Table 2: combats). The phasing player rolls 1D6 to determine the row to be used on the same table. The combat result is given at the intersection of the given row and column.
6. Apply the combat results. Combat results only apply to the Lead Attacker and the Lead Defender. If a unit is eliminated, all remaining step losses are ignored. The phasing player may now begin another combat.

7.3 Identification of the LA and LD

The phasing player designates the attacking zone and the target zone for each combat. Both zones must be adjacent and not separated by an impassable border or junction point.

He then designates which unit in the attacking zone will be the LA. The non-phasing player designates the LD among his units in the zone under attack. Position these units near the border or junction point between the two relevant zones. Units providing support are placed behind the LA or the LD. (DN N°10)

7.4 Combat Modifiers

7.4.1 Charge modifier

At the beginning of each scenario, place a Charge marker under all heavy cavalry units (Gendarmes and Chevau-Legers). This marker provides a +2 modifier to the CR of the unit if it is the LA during a combat.

This modifier does not apply for defense or for Reaction Charge. (DN N°11)

Both the charging unit (LA) and the charged unit (LD) must be in a type I GZ separated by a dashed line or a junction point with dashed lines only. Once the Charge modifier is used, remove the Charge marker from the game.

Disorganized units cannot use the Charge marker. The charge marker can be used once the disorganized unit reorganizes.

7.4.2 Leader modifier

Some Leaders provide a CR modifier to certain units that occupy the same GZ. These modifiers depend on the scenario and are described on the scenario sheet.

7.4.3 Class modifier

Combat units are grouped into classes which reflect their combat tactics. When confronting units of a different class, these tactics will earn the unit either a bonus or a penalty. The following classes are ordered from strongest (top) to weakest (bottom):

• A: Reiters, Cuirassiers
• B: Swiss Pikemen and Landsknechts
• C: Other Pikemen
• D: Arquebusiers, dismounted Argoulets, Les Enfants Perdus
• E: Gendarmes, Chevau-legers
• F: Mounted Argoulets
• G: Militias
• H: Artillery

Thus, Class A is superior to Class B, which is superior to Class C, and so on. To determine the Class modifier, compare the LA's and the LD's class. If the LA has a superior class, it receives a +1 modifier to its CR. If the LA has an inferior class, it receives a -1 modifier to its CR. (DN N°12)

7.4.4 Support modifier

Units in the attacking zone or the target zone which are not designated as LA or LD may support their respective lead unit if eligible. To be eligible, a unit must:

1. Be equipped with a different weapon type than the lead unit. In accordance with the combat tactics in use in this era, a combination of shock and shot weapons improves the effectiveness of combat units (DN N°13). Thus, in order to be eligible for support, a unit must possess a Combat Rating of a different type than its lead unit. If a lead unit has a CR in brackets (shock attack), only units with a CR in parentheses (shot attack) can provide support, and vice-versa.
2. Not be disorganized.
3. Not be isolated.

Support units can belong to a different column than their lead unit. The lead unit receives a +1 modifier per support unit.

In the case where several rounds of combat occur (see 7.9 and optional rule 11.1), the support modifier is checked and applied for each round.

There is no support modifier during Reaction Fire or Reaction Charge.

(Example 7: Combat - simple example - see Examples booklet.)

7.4.5 Second attack modifier

If a GZ is attacked several times in consecutive combats during the current combat segment, and the non-phasing player designates the same unit as LD, this LD receives a -1 modifier to its CR. This modifier also applies during the second combat round of a Clash of Pikemen (see 7.9) or of a Caracole (see 11.1).

This modifier does not apply if the attacks are not consecutive or if the non-phasing player designates a different LD.

This modifier does not increase if a same LD is attacked multiple times consecutively and remains -1.

7.4.6 Terrain modifier

Table 1: Terrain Modifiers Table contains modifiers for borders and GZ types. To determine the terrain modifier that applies, take the type of the LA unit and take the corresponding modifiers for the target GZ and for the border separating the attacker from the defender. Add both modifiers to the LD's CR. In case the attacking unit attacks through a junction point, select the border that provides the greatest advantage to the defender.

Special case for the Saint-Denis and Arques battles: the modifier for the border with a double solid line (symbolizing a fence/barricade) only applies to the LD of the side which occupied the corresponding GZ at the beginning of the scenario. When combat occurs through this border, against a LD of the other side, this LD does not benefit from this modifier; treat the border as if it was a dashed line.

7.5 Combat Results

7.5.1 Results

Combat results are given in Table 2: Combats and are noted in the form Attacker (phasing player's unit) / Defender (non-phasing player's unit).

1. QC: the unit must perform a QC. If the unit passes the QC, there is no effect. If the unit fails the QC, the unit is disorganized; place a DS marker on top of the unit. If the unit already has a DS marker, it loses 1 step and removes its DS marker. This step loss cannot be cancelled by a retreat. DS effects apply immediately.
2. DS: the unit is disorganized; place a DS marker on top of the unit. If the unit already has a DS marker, it loses 1 step and removes its DS marker. This step loss cannot be cancelled by a retreat. DS effects apply immediately.
3. Lose 1 or 2 steps (noted 1 or 2, respectively, on Table 2: Combats): the unit loses 1 or 2 steps. When losing its first step, flip the unit's counter from its front side to its back side. If the unit takes another step loss, it is eliminated. Mounted or dismounted Argoulets, Artillery and Les Enfants Perdus (see 11.4) units have only one step and are thus eliminated when then take their first step loss. If the combat result is marked with an asterisk, check for Leader casualties (see 7.6).

7.5.2 Step loss substitution

The non-phasing player may substitute a step loss result for a retreat. A "1 step loss" result can be cancelled by having the LD retreat one zone. A "2 steps loss" result can be cancelled by having the LD retreat one zone and take a step loss.

If no retreat is possible, all step losses must be taken.

Exceptions:

1. Artillery units may not retreat.
2. Disorganized units may not retreat.
3. A Clash of Pikemen follows special rules (see 7.9).
4. Orders change the retreat conditions (optional rules; see 10.1 and beyond).

7.5.3 Retreat

A retreat must proceed in the opposite direction from the attacking zone, toward the map's border identified as the Supply Edge, as defined in each scenario.

Retreat is a special movement that does not require spending MP. However GZ type, borders and junction points do affect retreat (see Table 7: Terrain costs and effects). The retreating unit incurs the least favourable of the following effects:

• Border with a dashed line and/or GZ (I): the unit must perform a QC before retreating:
  • If the unit passes the QC, it retreats normally.
  • If the unit fails the QC, it retreats and becomes DS.
• Border with a solid line and/or ZG (II): the unit retreats and becomes DS.
• Border with a double line or bold line and/or ZG (III) or (X): retreating through this terrain is forbidden. The unit must take all step losses.

Special cases of retreat through GZ occupied with friendly or enemy units:

• Retreat into or through a friendly-occupied GZ: retreat is possible as long as the stacking limit is not violated.
• Retreat into or through an enemy-occupied GZ: retreat is forbidden.

However, Leaders and Baggage units do not prevent enemy units from retreating into/through their GZ. If such retreat occurs, the Leader(s) or Baggage unit is eliminated.

Units can retreat into enemy ZoC without triggering reactions (RF or RC). A unit may leave the map when retreating; when this occurs, the retreating unit is eliminated. If a unit cannot retreat, the non-phasing player may not substitute step losses.

If the LD retreats, the non-phasing player can opt to have his supporting units retreat as well. Each support unit that retreats must follow the same procedure as the LD.

A Leader - CC or LG, can always retreat along with other retreating units of his side, unless eliminated during combat. Apply any asterisk results before the Leader may retreat (see 7.6).

(Examples 7 to 10: Combat - simple example, Combat - advanced example, Combat triggered by a reaction, Clash of Pikemen and Leader casualties - see Examples booklet.)

7.6 Leader Casualties

If the combat result in Table 2: Combats is marked with an asterisk *, Leaders in the corresponding zone may be eliminated (the asterisk can apply to the attacker as well as to the defender). First apply all combat results to the relevant units and resolve step-loss substitutions. Then, for each Leader in the relevant zone, roll 1D6 and add the number of friendly infantry, cavalry and artillery units remaining in the zone (do not add Les Enfants Perdus, Baggage and Leader units; count full-strength and reduced-strength units). If the modified result is strictly below 5, the Leader for whom the die was rolled dies in combat, i.e. he is eliminated. If he survives, he can then retreat with any retreating units.

An eliminated Leader (showing a standard CC) cannot be eliminated again. Indeed, it is expected that there will always be an officer of equivalent ability to act as a new CC.

If a Leader was eliminated because enemy units entered his zone during movement, retreat or advance after combat, apply 7.6.1 or 7.6.2 then flip the counter to show the standard CC and place it in the nearest friendly-occupied GZ.

For example, a GZ contains 3 combat units and a Leader: two units are at full-strength and the LA at reduced-strength. The combat result yields 1 step loss and an asterisk for the attacker. After the combat result has been applied, there remain two units and the Leader. The player checks whether his Leader is eliminated. He rolls a 1. Thus the result is 1 (die roll) +2 (remaining units) = 3 which is less than 5. The Leader is eliminated.

7.6.1 Elimination of a Lieutenant-General

If the LG is eliminated, all the player's units must immediately make a QC and apply the result, even if they belong to the non-phasing player.

Then flip the LG's counter to its back side to show a standard Colum Commander who replaces the LG. The player has a new CC to command the former LG's column, but no more LG.

7.6.2 Elimination of a Column Commander

If a named CC (front side of the counter) is eliminated, all units belonging to his column (i.e. units displaying the same color) must immediately make a QC and apply the result, even if they belong to the non-phasing player.

Then flip the CC's counter to its back side to show a standard Column Commander who will replace the CC. The standard CC can be as good as the historical CC, but never better.

(Example 10: Clash of Pikemen and death of a Leader - see Examples booklet.)

7.7 Advance after Combat

Advance after combat is only allowed through a border or a junction point which is not impassable.

If a target GZ is emptied following combat - that is after elimination or retreat of all units in the zone, then all units that participated in the attack (LA and support units, except artillery which cannot move) can enter the zone. Units which did not support the LA cannot enter the unoccupied GZ. Only attacking units may advance after combat, the LD and its support units cannot advance after combat.

Advance after combat does not cost MPs.

DS units cannot advance after combat.

IS units cannot advance after combat, since they cannot attack nor provide support.

Leaders and Baggage units do not prevent enemy units from advancing after combat. If units advance into a GZ containing enemy Leaders or Baggage units, those Leaders and Baggage units are eliminated.

(Example 11: Combat result and advance after combat - see Examples booklet.)

7.8 Artillery Fire

Artillery fire is a type of combat that does not follow the above combat rules, except for paragraphs 7.1 Combat principles, 7.4.4 Support modifier and 7.4.6 Terrain modifier.

When the phasing player selects an attacking GZ, he may have artillery units in this GZ fire in addition to close quarters combat (LA vs LD). A player resolves artillery fire and close quarters combat in the order he chooses.

To conduct artillery fire, the phasing player selects an artillery unit and a target unit within range. Artillery units have a Gun Range which depends on their caliber: 1, 2 or 3 zones away, as printed on the counter. To check whether a target unit lies within range, count the target unit's zone, but not the artillery unit's zone. Any zones between the target zone and the firing zone are called "intermediate zones". The target unit can be in any eligible zone, independently from other artillery fire or from normal combat.

Resolve each instance of artillery fire separately as an independent attack, i.e. multiple artillery units in the same GZ cannot combine their CR. Each artillery unit in the attacking zone can fire only once per combat. An artillery unit can fire and provide support to the LA during the same combat.

Since a given GZ can be selected for attack only once per combat segment, artillery units cannot fire if their GZ was previously designated for attack. However a GZ or unit can be targeted and attacked several times during the same segment.

An artillery unit may only fire at a unit for which it has a clear Line of Sight (LoS).

Add the following modifiers to the artillery's CR:

• The target unit is 3 zones away: -1;
• The target unit is 1 zone away: compute a Support modifier as in 7.4.4.
• Determine the terrain modifier as in 7.4.6 (when there are multiple borders, select the most favorable one for the defender).
• The artillery unit is DS: -1

The phasing player rolls 1D6:

• If the die roll is strictly lower than the artillery's modified CR, the target unit loses one step (step loss substitution is not permitted).
• If the die roll is equal to the artillery's modified CR, the unit is immediately disorganized.
• If the die roll is greater than the artillery's modified CR, there is no effect.

(Examples 4 and 12: Fire Range and Line of Sight, elevation; Artillery fire - see Examples booklet.)

7.9 Clash of Pikemen

All pikemen units are eligible for a Clash of Pikemen: Swiss Pikemen, Landsknechts, and Catholic Pikemen. If both the LA and LD of a combat are pikemen, place a Clash of Pikemen marker on each unit. Depending which pikemen unit fights against which, a second combat can occur between the same LA and LD. Resolve the two combats successively. If the LD is eliminated after the first combat, remove the marker and do not perform the second combat.

• Clash between Swiss Pikemen and Landsknechts or between Landsknechts of the Leaguers and Royalist armies:
  • The second combat is mandatory.
  • Retreat is not allowed, the LD must take all step losses.
• Clash between Swiss Pikemen and Catholic Pikemen or between Landsknechts and Catholic Pikemen:
  • The phasing player decides whether there will be one or two combats before resolving combat.
  • Retreat is allowed.

(Example 10: Clash of Pikemen and death of a Leader - see Examples booklet.)

8.0 Reorganization Segment

A unit can reorganize if:

• it stands within the Command Radius of its CC or LG,
• it is not in an enemy ZoC,
• it is not isolated.

To reorganize, a DS unit must perform a QC:

• If the unit passes the QC, the unit reorganizes: remove the DS marker.
• If the unit fails the QC, the unit remains DS.

If the unit's Leader (CC or LG) is in the same GZ, it may perform the QC against this Leader's QR instead of its own QR. The Leader's QR may be used to reorganize all eligible units.

(Example 13: Reorganization - see Examples booklet.)

9.0 Victory Conditions

The Victory Points markers (single numbers and tens) and the Victory Point Track of the scenario sheet are used to track Victory Points (VP) earned by each side.

Each scenario lists a series of objectives that award VPs when completed, such as: occupation of given GZ (with a non-isolated unit), elimination of a Leader, elimination of units and Baggage units.

On the last turn of the battle, perform the Victory Check segment and determine the side's respective victory points. This difference indicates the level of victory earned by the side with the highest VP total (DN N°14).

10.0 Advanced Rules

If used, the advanced rules supersede any basic rules that contradict the advanced rules.

10.1 Orders

As opposed to a real commander, a player has a global, top-down view of the battlefield helping him make more informed decisions about how to use his troops. In order to improve the depiction of the chaos of the battlefield, the Orders rule is a system for giving orders to units which, without preventing players from controlling their troops in real time, generates additional constraints and encourages players to better plan their attacks. Orders influence the game in two ways. Firstly, units of a given column will receive modifiers to their various actions depending on which order their column is given. Secondly, the initiative may now switch side depending on the orders given to each side's columns.

10.1.1 Principles

Each scenario indicates which order is given to each column at the beginning of the battle. An order applies to all units of that column and only to those units, as long as they are within the Command Radius of their Leader. Units entering the battlefield as reinforcements are considered in-command during the whole movement segment and follow the order given to their column. Isolated units follow the Reserve order instead of the order given to their column.

The corresponding order marker is placed under the Leader of the column to which the order is given.

Note: Leaders never receive the modifier provided by the order. For instance, a Leader keeps a Movement Allowance of 10 even if his column is given an order that provides a +2MP modifier or an order that provides a -2MP modifier.

Orders are not secret, however the opposing player may not look at a player's orders unless the order is modified, or for verifying modifiers provided by an order, or during the End of turn phase when determining which side gets the initiative.

There are seven orders:

• Attack
• Disengage
• Hold
• March
• Reserve
• Retreat
• Skirmish

The effect of each order on movement, combat and reaction is given in Table 3: Orders.

10.1.2 Modification of an order

During the orders segment (which follows the command segment when the advanced rules are used), each Leader can attempt to modify the order given to his column (DN N°8).

However, it is not possible to modify the order of a column which arrived as reinforcement during the previous turn.

To successfully change a column's order, the player rolls a die, modified according to Table 4: Modification of an order, the result of which must be strictly below the QR of the column Leader. The column Leader's QR may be substituted for the LG's QR if both occupy the same zone.

The orders segment occurs between the command segment and the movement segment as described below:

Player phase

• Command segment
• Orders segment
• Movement segment
• Reaction segment of the non-phasing player
• Combat segment
• Reorganization segment

10.1.3 Determination of the initiative

In the advanced rules, as opposed to the basic rules, the initiative may switch side any turn depending on the orders given to all columns (DN N°16). Begin each End of turn phase with the determination of the initiative segment.

End of turn phase

• Determination of the initiative
• Victory check
• Advance of the time marker

Players reveal orders given to each of their columns. An initiative rating is given for each order. The more aggressive an order is, the higher the initiative rating.

The initiative ratings are as follow:

• Attack: 2
• Skirmish: 1
• March: 0
• Reserve: 0
• Hold: 0
• Disengage: -1
• Retreat: -2

Each side totals its initiative ratings. Only orders given to columns that still contain at least one combat unit (except Baggage units) and one Leader are used. Orders belonging to columns with only a Leader or a single unit remaining are not used.

The side with the highest total receives the initiative for the next turn. In the event of a tie, the player already holding the initiative keeps it for the next turn.

(Example 14: Orders and initiative - see Examples booklet.)

11.0 Optional Rules

Players can select which optional rules to integrate into their game; they can pick as many as they want. Each optional rule is intended to increase the realism of the depiction of combat in this era.

11.1 Caracole

11.1.1 Caracole declaration

Only Reiters units can declare a caracole. A caracole is declared during the movement segment by the phasing player. A Reiters unit may only declare a caracole if it is adjacent to a zone occupied by an enemy unit or if it ends its movement adjacent to such a zone. The attacked zone must be a type (I) GZ, and the border separating the two zones must be a dashed line. If the zones are separated by a junction point, all zones converging to this point must be dashed lines.

Only one Reiters unit in each zone may declare a caracole.

Put a Caracole marker on the unit which declared a caracole.

This unit must be the Lead Attacker if the non-phasing player attempts a reaction against this zone, and during the following combat segment. As for all other units, a Reiters unit which ends its movement in an unoccupied GZ adjacent to an enemy zone can trigger a reaction. If the non-phasing player performs a Reaction Fire or Reaction Charge against this unit, the LD adds +1 to its CR (DN N°17).

If this reaction disorganizes or causes the Reiters unit to take a step loss, the caracole is aborted and the Caracole marker is removed.

Here are the relevant steps pertaining to a caracole during a player's phase:

• Command segment
• Orders segment (advanced rules)
• Movement and Caracole declaration segment
• Reaction segment of the non-phasing player
• Combat and Caracole resolution segment
• Reorganization segment

11.1.2 Caracole resolution

During the combat segment, units with a Caracole marker must attack an adjacent enemy zone if possible. If several zones are eligible, the phasing player chooses which one to attack. If no attack is possible, remove the Caracole marker. The unit performing the Caracole must be designated as the Lead Attacker.

Combat rules are applied with the following modifications:

The LA can perform two consecutive attacks against the same GZ.

The first attack must be entirely resolved before deciding whether to perform a second attack.

If the target zone becomes unoccupied as a result of the first combat, the Reiters and all supporting units (except artillery) may advance into the unoccupied zone (7.7) but may not perform a second attack.

If the Reiters unit suffered a DS or a step loss during the first attack, the Caracole marker is removed and the combat ends.

If at least one enemy unit remains in the target GZ after the first combat, the phasing player decides whether to perform a second attack with the Reiters unit against either the same LD if it survived, or another LD chosen by the non-phasing player if the previous LD was eliminated or has retreated.

The Reiters unit with the Caracole marker must perform a successful QC before resolving the second attack. Otherwise, the combat ends.

At the end of the combat, remove the Caracole marker.

(Example 15: Caracole - see Examples booklet.)

11.2 A Moment of Hesitation

If, during the combat segment, a unit loses one or two steps - as the result of combat, retreat or disorganization - all units in the same GZ must immediately perform a QC. This rule reflects the impact the sight of comrades' deaths had on troop morale. Units that fail their QC become DS. In case this disorganization causes a step loss, it does not cause a further QC.

Each unit only performs one such QC per combat segment.

11.3 Hunger for Gold

This rule intends to simulate the risk of the disorganization of some mercenary troops caused by their fondness for looting.

This rule only applies when a Baggage counter is alone in a GZ. Any Landsknechts unit adjacent to an enemy Baggage unit alone in a GZ at the end of the unit's movement segment must perform a QC. If the unit fails the QC, it immediately becomes DS.

Swiss units are more disciplined and are thus not affected by this rule.

11.4 Les Enfants Perdus

Les Enfants Perdus (EF) is an infantry detachment from a larger contingent; it represents a party of around 50 men. EF units have only one step and are of the same Class as their parent unit. Their Movement Allowance and Quality Rating are higher than that of the parent unit.

Only Protestants can create Les Enfants Perdus units.

11.4.1 Generation of an Enfants Perdus unit

During the movement segment, a full-strength Arquebusiers unit, referred to as the parent unit, can generate up to two EF units by spending 1MP per unit created.

Les Enfants Perdus counters are identified by the Roman numeral on the top left corner (I, II, etc.). To identify the parent unit, place an EF marker with the same numeral under the parent unit.

Les Enfants Perdus cannot move during the movement segment in which they were created. However, the parent unit can continue moving by spending its remaining MP.

The generation of a single EF unit has no effect on the parent unit. However, if a second EF unit is created, the parent unit immediately loses one step. When an Arquebusiers unit is at reduced-strength, it can no longer create EF units.

A DS Arquebusiers unit can generate EF units; those EF are not DS. Disorganized EF units can recombine with the parent unit regardless of the state parent unit at the moment of recombination. The parent unit retains its current state (DS, etc.) once the EF unit is absorbed. Thus, if a non-DS parent unit absorbs a DS EF unit, the parent unit retains its non-DS state.

In case an EF unit is eliminated, keep the corresponding EF marker under the parent unit to keep track of the number of EF units that it has created.

A Les Enfants Perdus unit recombines with its parent unit during the owning player's movement segment. The EF unit must be in the same GZ as its parent unit and the parent unit must spend 1MP per EF unit absorbed. When the second EF unit has recombined with its parent unit, flip the parent unit to its full-strength side. As long as an Arquebusiers unit has enough steps remaining, it can generate up to 2 EF.

11.4.2 Following Orders

A Les Enfants Perdus unit inherits the command status of its parent unit. If in command, it is subject to its parent unit's column order.

11.4.3 Les Enfants Perdus Movement

Les Enfants Perdus units do not count toward the stacking limit.

An EF unit must occupy either the adjacent GZ or the same GZ as its parent unit at the conclusion of any movement segment (player A's as well as player B's). If this condition is not fulfilled, the EF unit is immediately eliminated without recombining with its parent unit.

Les Enfants Perdus do not exert a ZoC.

At the beginning of each scenario, when setting up the game, the Protestant player can generate EF units and place them in the same GZ as their parent units or in an adjacent GZ.

11.4.4 Les Enfants Perdus Reaction and Combat

• Reaction: EF units can retreat one GZ without spending any MP when an enemy infantry or a cavalry unit ends its movement into an adjacent GZ, even if this GZ was not empty. This only applies to units that ended their move in the adjacent GZ, units that did not move are not considered. The following conditions apply:
  • EF may never retreat through/into impassable terrain (GZ, borders, junction points).
  • EF may always retreat one GZ when reacting to an infantry unit's movement.
  • EF must pass a QC if reacting to a cavalry unit's movement.
• Combat: EF unit carry out combat normally except that they do not provide nor receive support.
• Combat result: EF are affected by all combat results in Table 2: Combats as normal. EF may retreat if they fulfill all retreat conditions.

If an EF is eliminated, its parent unit may no longer return to full strength.

Les Enfants Perdus are eliminated as soon as their parent unit is eliminated.

(Example 16: Les Enfants Perdus - see Examples booklet.)