RulesPal
Chat
Rulebook
Pacific Battles: Nomonhan, 1939 thumbnail

Pacific Battles: Nomonhan, 1939

Pacific Battles: Nomonhan, 1939 Rulebook

Table of Contents

Table of Contents

  • 1.0 Introduction
  • 2.0 Game Components
    • 2.1 Game Equipment
    • 2.2 Game Map
    • 2.3 The Counters
    • 2.31 Land Units
    • 2.32 Unit Classes
    • 2.33 Game Markers
    • 2.34 Game Charts and Tables
    • 2.35 Other Equipment
    • 2.36 Definition of Terms
  • 3.0 How to Set Up the Game
    • 3.1 Choosing Sides
    • 3.2 Placing Turn Markers
    • 3.3 Old Hands Note
  • 4.0 Sequence of Play
    • 4.1 Sequence of Play
  • 5.0 Campaign Markers
    • 5.1 Picking Campaign Markers
    • 5.2 Command Control Level
    • 5.3 Campaign Marker Outcomes
    • 5.4 Hold 'em If You Got 'em
  • 6.0 Reinforcements
    • 6.1 Receiving Reinforcements
    • 6.2 Placing Reinforcements
    • 6.3 Replacements
  • 7.0 Logistics
    • 7.1 Expending Supply Units
    • 7.2 Supply Radius
    • 7.3 HQ Activation
    • 7.4 In-Activation
    • 7.5 Refitting Eliminated Units
    • 7.6 Repairing Damaged Aircraft
    • 7.7 Fortifications
    • 7.8 Supply Units
    • 7.9 Logistics Phase
  • 8.0 Suppression
    • 8.1 Combat Effective Units
    • 8.2 Suppressed Units
    • 8.3 Bombardment Suppression
    • 8.4 Secondary Suppressions
  • 9.0 Reorganization
    • 9.1 Breakdown
    • 9.2 Combine
    • 9.3 Causing Breakdowns
    • 9.4 Restrictions
    • 9.5 Other
  • 10.0 Headquarters
    • 10.1 Support Points
    • 10.2 Follow-On Movement
    • 10.3 Combat
    • 10.4 Support Radius
    • 10.5 Limits
    • 10.6 HQ Presence
  • 11.0 Movement
    • 11.1 Movement Phases
    • 11.2 Moving a Unit
    • 11.3 Movement Costs
    • 11.4 Minimum Move
    • 11.5 Prohibited Movement
    • 11.6 Enemy Zones of Control (see 13.0)
    • 11.7 Special Terrain Movement
    • 11.8 Infiltration
  • 12.0 Land Unit Stacking
    • 12.1 Stacking Limit
    • 12.2 Supply Free Stacking
    • 12.3 Air/Naval Exception
    • 12.4 Stacking Limit Enforcement
    • 12.5 Overstacking
    • 12.6 Opposing Units Stacking Prohibition
    • 12.7 Bombardment Exception
    • 12.8 Initial Deployment
  • 13.0 Zones of Control
    • 13.1 ZOC Extension
    • 13.2 Blocking ZOCs
    • 13.3 Movement Effects
    • 13.4 Disengagement
    • 13.5 Infiltration
    • 13.6 Combat Effects
    • 13.7 Pursuit
    • 13.8 Retreat
    • 13.9 Support Effects
  • 14.0 Land Combat
    • 14.1 Attacking and Defending
    • 14.2 Declaring All Battles First
    • 14.3 For Each Ground Combat
    • 14.4 Choice of Combat Results Tables
  • 15.0 Implementation of Combat Results
    • 15.1 Order of Results
    • 15.2 Elimination
    • 15.3 Retreat
    • 15.4 Pursuit
    • 15.5 Banzai!
  • 16.0 Air Operations
    • 16.1 Air Units
    • 16.2 Sorties
    • 16.3 Air Missions
    • 16.4 Reserve
    • 16.5 Air Superiority
    • 16.6 Interdiction
    • 16.7 Air Recon
    • 16.8 Air Strike (Air Bombardment)
    • 16.9 Air Losses
    • 16.10 Repair
  • 17.0 Naval Bombardment
  • 18.0 Fog of War
  • 19.0 Headquarters (HQs)
  • 20.0 Engineer Units
  • 21.0 Fortifications
  • 22.0 Amphibious Movement
  • 23.0 Evacuation
  • 24.0 Victory Conditions
    • 24.2 Campaign Victory Conditions
    • 24.3 Sudden Death Victory
    • 24.4 Eliminating Units
    • 24.5 Evacuating Units
    • 24.6 Objective Hexes
  • 25.0 Nomonhan (Khalkhin-Gol) Campaign Scenario
  • 26.0 Scenario Special Rules
  • 27.0 Pacific Battles Optional Rules (27.0 - 35.0)
  • 28.0 High Ground
  • 29.0 HQs and Artillery Fires
  • 30.0 Air Superiority (More)
  • 31.0 Close Air Support
  • 32.0 Capturing Supply
  • 33.0 Airborne Landings
  • 34.0 Optional Fog of War
  • 35.0 Nomonhan Optional Scenario Rules
  • Source Gaps

1.0 Introduction

Pacific Battles is a wargame series of several campaigns in the Pacific Theater of operations in World War II. The system emphasizes the operational level of these campaigns, and deals with land and air operations. This is a two-player game. One player controls the Japanese, the other the Soviets.

Nomonhan is the second game in the series. It covers the entire land-air campaign for that strategic Mongolian city of Nomonhan, May to September, 1939.

2.0 Game Components

2.1 Game Equipment

A complete set of Pacific Battles should include the following components: one game map, one set of game rules, 228 die cut counters, one set of game charts (printed on the map or in the rules). Players will also need one 6-sided die.

Players will need two opaque containers in which randomized markers will be placed.

2.2 Game Map

The game map shows the area in which the original battle or campaign was fought. A hexagonal grid has been superimposed on the mapsheet to regularize movement of units, and to delineate terrain types.

Air Operations Display: This is placed on the map. It is used to organize players' air units for various air operations.

2.3 The Counters

There are three basic types of counters in the game:

  • Land Units, which represent military forces.
  • Air Units, which represent the impact of air sorties.
  • Markers, which are used to record various game functions and other information.

Errata: Japanese HQs should have support values of "0" on their reverse sides.

2.31 Land Units

Certain land units are backprinted.

Combat Units: The front side is the unit's combat effective status. The reverse side is its Fog of War side.

Headquarters: The front side is the Activated side. The reverse side is the Non-Activated side. A Headquarters which is Activated can provide Support to units within its radius.

Supply Units: These are used like "change", with each supply unit representing "x" number of supply points.

Land Unit Types (see 2.32).

Note: Air units represent the effectiveness of airpower, and may represent anything from 12 to 60 aircraft depending on the quality of the air force.

Attack Strength: The basic offensive strength of a unit. This is based on the effectiveness of the unit's firepower, training and leadership.

Defense Strength: The basic strength of a unit when it is defending.

Movement Factor: The basic number of hexes a unit may move in a turn.

Support Factor: The number of combat shifts a HQ may apply to friendly units within radius.

Support Radius: The number of hexes within which a HQ may support friendly units.

Unit Designation: The unit's historical identification, number or name.

Unit size:

  • XXXXX = army group HQ
  • XXXX = army HQ
  • XXX = corps HQ
  • XX = division HQ
  • X = brigade or brigade HQ
  • III = regiment or group
  • II = battalion or squadron
  • I = company
  • * = breakdown unit (see rule 9.0)

Unit abbreviations: See the Scenario.

Allied Controlled Units (Nomonhan):

  • Yellow on Red = Soviet Army
  • Black on Red = Soviet breakdown
  • Red = Soviet airpower
  • Green on Red = Mongolian

Japanese Controlled Units:

  • Brown on Khaki = Japanese army
  • White on Khaki = Japanese breakdown
  • Gold on Khaki = Manchukuoan
  • Khaki = Japanese airpower

2.32 Unit Classes

Land units are divided into two classes, Mechanized and Non-mechanized. Mechanized units are denoted by having the armor "oval" printed on them. All other units are non-mechanized.

Note: Mechanized and Non-Mechanized units pay different Movement Point costs to move on the map in accordance with their class.

2.33 Game Markers

Game Markers are used for various game functions. Certain markers are backprinted with other types of markers. Players use whichever side they need for the current game function. The number of markers in the game is not a design limit; should players need more, they may improvise more (though neither player may ever have more Campaign markers than are provided in the game).

Deception: Fog of War.

Command Level: Indicates the current number of Campaign markers the player can pick each turn.

Fortified: Indicates a unit that has dug in.

Suppressed: Indicates a unit that has suffered a Suppressed result.

Turn: Used to indicate which turn (week) is in progress.

Campaign Markers: Special Events.

2.34 Game Charts and Tables

Printed on the map, these are used to conduct certain game functions, and to simplify certain game procedures. These include:

  • Air Interdiction Table: This chart is provided for an optional future variant; use the Nomonhan Reinforcement Interdiction Table for all interdiction missions.
  • Nomonhan Reinforcement Interdiction Table: This chart is used for all interdiction missions.
  • Air Missions Table: Used to organize Allied air units/fleets in play.
  • Bombardment Table: Used to resolve air to ground attacks.
  • Combat Results Tables (CRTs): Used to resolve Land Combat; there are two CRTs, Raid and Assault. Errata: For the Assault CRT DS and BB explanations, it should read "50% of defending..." instead. For the Raid CRT DM explanation, replace the word "defending" with "attacking".
  • Campaign Markers: These are used to generate various random events as well as special actions. They are drawn from a player's Pool.
  • Terrain Effects Chart: Used to show the effects of various terrain types on movement.
  • Turn Record/Reinforcement Chart: Used to indicate the current game turn and phase. Each player has one such chart because they also place their reinforcements on it. Errata: On the Nomonhan Reinforcement Interdiction Table, a die roll of "4," "5," "6," "7," and "8" should also indicate an "AA" hit, which places one interdicting air unit in the Damaged box.
  • Sequence of Play: Indicates the order in which various phases of a turn are played.

2.35 Other Equipment

You will need a six-sided die, pen and paper.

2.36 Definition of Terms

A number of critical rules are contained within these definitions.

Activated Airfield: An airfield which is capable of basing aircraft. This applies to only certain games in the series.

Activated HQ: A HQ which is on its front side and can provide support to other units. The reverse side (without a support value) is its Un-activated side.

Column Shift: The changing of a column on a Combat Results Table. A rightward shift is in favor of the attacker; a leftward shift is in favor of the defender.

Combat Effective: A combat unit that is cohesive, represented by the front side of the unit.

Combat Unit: All land units other than HQs and Supply units.

Command Control Level: The number of Campaign markers a player picks each turn.

Control: A player controls a hex if one of his units occupies that hex.

Die Roll Modifier: Certain game charts require a die roll modifier. A positive modifier is added to the result rolled on a die (e.g., a die roll modifier of +1 added to a rolled result of 3 would give a final outcome of 4). A negative die roll modifier is subtracted from the result rolled (e.g., a die roll modifier of -1 subtracted from a rolled result of 6 would give a final outcome of 5). Note this is distinct from column shifts.

Enemy: Units belonging to the side opposing the player.

Map: The hexagon grid portion of the playing surface.

Non-phasing Player: The player who is not the Phasing Player (see below).

Occupation: A player occupies a hex if he has a land unit physically occupying it. Simply being the last to have passed through the hex is not sufficient to qualify for occupation. The presence of enemy zones of control have no effect on occupation.

Phase: A segment of a turn in which each player conducts various operations.

Phasing Player: The player whose segment is occurring.

Refitting: The process by which units eliminated by certain combat results may be returned to the map.

Suppressed: A combat unit that has temporarily lost combat effectiveness.

Zone of Control: Six hexes surrounding a unit that inhibits enemy movement.

3.0 How to Set Up the Game

The game is played as scenarios. Each scenario shows one major battle or campaign.

3.1 Choosing Sides

Players choose which sides they will play. They then place the units for their side as listed under initial deployment, in the order listed. Other units which are received later in the scenario (reinforcements) are set aside (players may place them on the appropriate space on the Turn Record Track as a reminder). Play starts with the first turn and continues on until the final turn, until one side gets a Sudden Death Victory, or until one player concedes. Use the Sequence of Play to determine which actions will be taken at any point in the turn. Units may be set up anywhere in the designated areas. They may not be set up in the same hex as enemy units, or enemy controlled bases and cities. Units may set up in enemy Zones of Control.

3.2 Placing Turn Markers

Each player places their respective Turn marker on the first turn of the scenario.

3.3 Old Hands Note

Players perform all phases of the Sequence of Play on turn 1, including campaign marker picks and receiving routine reinforcements.

4.0 Sequence of Play

The game is played in turns called Game Turns. Each Game Turn is divided into two Player Turns (First and Second; these will be determined by the scenario). Each Player Turn is composed of several distinct segments called Phases. All actions take place in a prescribed order of phases, called the Sequence of Play.

4.1 Sequence of Play

Planning Phase

Initiative Determination Phase. The player who has the higher number of Victory Points (24.0) becomes the first player for the remainder of this turn; the other player is the second player. In the event of a tie, roll a die to determine who has the Initiative.

Campaign Marker Phase (rule 5.0). The First Player picks the number of Campaign markers designated by his command control level. The Second player picks the number of Campaign markers designated by his command control level.

Air Mission Allocation Phase (rule 16.0).

  1. Return any air units in mission boxes to the Reserve box.
  2. Each player simultaneously and secretly allocates all air missions for the turn.
  3. Each player reveals all Air Missions.
  4. Air Superiority Sub-phase (rule 16.0). Next, execute all Air Superiority firing (doing so simultaneously).

Reinforcement Phase (rule 6.0).

  1. The First Player checks for any Reinforcement delay due to Interdiction. He then places any reinforcements which will appear this turn.
  2. The Second player checks for any Reinforcement delay due to Interdiction. He then places any reinforcements which will appear this turn.

Logistics Phase (rule 7.0). The First player:

  1. Removes all suppression markers from his units.
  2. Breaks down/combines units.
  3. Expends supply units to Refit eliminated units, to Activate HQs, and to perform other designated logistical functions.

The Second player:

  1. Removes all suppression markers from his units.
  2. Breaks down/combines units.
  3. Expends supply units to Refit eliminated units, to Activate HQs, and to perform other designated logistical functions.

First Player Initial Impulse

  1. Movement Phase (rule 11.0). The First player moves some, none or all his land units.
  2. Air Strike Phase (rules 16.0, 17.0). The First player executes any Air bombardments and air recon missions.
  3. Land Combat Phase (rule 14.0). The First player conducts Land Combat.

Second Player Initial Impulse

  1. Movement Phase. The Second player moves some, none or all his land units.
  2. Air Strike Phase. The Second player executes any Air bombardments and air recon missions.
  3. Land Combat Phase. The Second player conducts Land Combat.

First Player Follow-On Impulse

  1. Movement Phase. The First player moves some, none or all of his land units that are within activated HQ radius.
  2. Air Strike Phase. The First player executes any Air bombardments and air recon missions.
  3. Land Combat Phase. The First player conducts Land Combat.

Second Player Follow-On Impulse

  1. Movement Phase. The Second player moves some, none or all his land units that are within activated HQ radius.
  2. Air Strike Phase. The Second player executes any Air bombardments and air recon missions.
  3. Land Combat Phase. The Second player conducts Land Combat.

End of Turn Phase

  1. Victory Points Phase (rule 24.0). Players check for Victory Points gained at the end of the turn. If one player has achieved their Sudden Death Victory condition, the game ends.
  2. Game Turn Advance Phase. If this is the last turn of a scenario, the game ends. Otherwise, move the Turn marker forward one space.

Note: Players must follow the above sequence of play rigidly!

5.0 Campaign Markers

5.1 Picking Campaign Markers

During each Campaign Marker Phase, the player picks a number of Campaign markers as per his own Command Control level at the start of the phase. Markers are drawn at random from the Pool, one at a time. As each marker is picked, check the Campaign Marker Explanation Table and apply the result.

5.2 Command Control Level

This is set by the scenario. Certain events will raise the level during the course of the game's play.

5.3 Campaign Marker Outcomes

These are explained on the Chart, but to sum it up, certain markers must be played immediately. Other markers can be held and played later in the game. Certain markers are removed from the game once played, others are returned to the pool or remain in effect for the rest of the scenario.

5.4 Hold 'em If You Got 'em

A player may hold any number of Campaign markers.

6.0 Reinforcements

Reinforcements are additional units received in the course of the game. Reinforcements are placed in the friendly Reinforcement Phase.

6.1 Receiving Reinforcements

A player receives reinforcements as listed for the Scenario. Reinforcements are listed as Groups. Each Group will have one or more units in it.

6.11 Routine Reinforcements. Certain reinforcements (air and/or supply units) are listed as "Routine". These are received each and every turn. Other units are received only once per scenario.

6.12 Scheduled Reinforcements. These appear on a specific turn.

6.13 Campaign Marker Reinforcements. These appear only if a designated Campaign marker has been picked.

6.14 Optional Reinforcements. These are received only under the conditions listed.

6.2 Placing Reinforcements

6.21 Placement Strictures. Units are placed on the hexes indicated by the scenario during the Reinforcement Phase (unless delayed). They may not be placed in an enemy occupied hex or prohibited terrain. They may be placed in a hex containing an enemy ZOC. Players may voluntarily delay the introduction of reinforcements until a later turn.

6.22 Placement Requisite. If all placement hexes are unavailable, then the unit must be placed on the first turn there is an available placement hex during a Reinforcement Phase. Reinforcements may move and fight normally in the turn they are brought into play. Placing them on the map does not count against their movement for the turn.

6.23 Overstacking During Placement. Reinforcements may be placed overstacked.

6.24 Interdiction. The Interdiction rule 16.6 may cause reinforcements to be involuntarily delayed or eliminated.

6.25 The Lost Battalion. If a reinforcement would enter the game after the last turn, then it is not received.

6.3 Replacements

A unit that has been eliminated in combat may be brought back into play as a replacement: see the Refit rule 7.5.

7.0 Logistics

7.1 Expending Supply Units

Logistics in the game is a function of expending supply units. All supply functions are conducted during the Logistics Phase. Supply is expended to conduct the following game functions:

  1. Activate an HQ.
  2. Refit eliminated HQ and Combat units.
  3. Repair damaged aircraft units.
  4. Build fortifications.
  5. Other functions as indicated.

7.2 Supply Radius

Each supply unit can provide supply to any units in its own or adjacent hexes. The presence of terrain and/or enemy ZOC does not affect a supply radius.

7.3 HQ Activation

Expend one Supply unit. One friendly HQ within supply radius is Activated. Flip that HQ to its Active side (or keep it there if it had been activated during the last turn).

An HQ that has been activated:

  1. Provides Support to units within its Support radius. This is explained below.
  2. Allows units within its Support Radius to move during the Follow-On movement phase.

Note: Enemy ZOCs do not interfere with the HQ activation of units.

7.4 In-Activation

A player must flip to its inactive side any and all HQs for which he did not expend a supply unit during a Logistics Phase.

7.5 Refitting Eliminated Units

Refit occurs during the Logistics Phase. Only units in the Replaceable Units/Damaged Aircraft box may be replaced. Costs are as follows:

  • Replace an HQ: Expend a number of supply points equal to its Support Value.
  • Replace a combat unit: One supply unit will replace up to three battalion equivalents.
  • Replace an air unit: One supply unit will replace up to three air units.

7.51 Refit Replacement. Refit ground units are replaced immediately in the hex (or off-map base) in which the supply unit was expended. This may also be done in an off-map base.

7.6 Repairing Damaged Aircraft

Each supply point expended causes up to three air units in the damaged box to be shifted to the Ready box. For example, to repair four to six damaged aircraft you would have to expend two supply points.

7.61 Air Unit Repair. Generally, a supply unit expended to repair an air unit must be in an off-map base. See scenarios for special cases.

7.62 Irreparable Air Units. Air units in the permanently eliminated box may not be repaired (but are available for exchange).

7.7 Fortifications

See the Fortification rule (21.0).

7.8 Supply Units

Supply units are treated as land units, with the following special rules:

  1. The number on the counter is the number of Supply Points. These can be used as "change", breaking them down or building them up as necessary.
  2. They are expended to provide logistical functions.
  3. Supply units do not count for stacking. They have no ZOC.
  4. Supply units are affected by combat results. Each supply point is equal to one Battalion Equivalent for losses.
  5. Supply units that receive a Retreat or Rout result are instead eliminated.
  6. Eliminated supply units are returned to the counter mix and may be used again.

7.9 Logistics Phase

All supply expenditure is during the Logistics Phase. You do not expend supply at any other point in the turn, unless stated. Units do not otherwise need to trace a line of supply as in many other wargames.

8.0 Suppression

Combat units are in one of two states:

  1. Combat Effective: This is the normal state of a unit.
  2. Suppressed: This is indicated by placing a Suppressed marker on it.

8.1 Combat Effective Units

Combat effective units function normally.

8.2 Suppressed Units

Suppressed units are affected as follows:

  1. They lose their ZOCs.
  2. They have their movement factors halved. Any fractions are retained.
  3. If any suppressed units are involved in an attack, then shift the combat column one to the left.
  4. If any suppressed units are involved in a defense, then shift the combat column one to the right.

8.3 Bombardment Suppression

Combat effective units can become Suppressed due to Bombardment results.

8.4 Secondary Suppressions

The effect of more than one Suppressed result on a unit is ignored.

9.0 Reorganization

Players may substitute certain brigade or regiment sized units with battalions, and vice versa, at certain points in the game (in some games, brigades may be replaced with regiments). The smaller sized unit (brigade or in some cases, regiments) are called "subordinate units". Replacing a brigade or regiment with a subordinate unit is called "Breakdown"; replacing subordinate units with brigades or regiments is called "Combining". These may occur only in the designated phases of the game turn. The types of units that may reorganize are stated in the scenario.

Subordinate units are indicated with an asterisk or different color unit box.

9.1 Breakdown

Breakdown occurs only in the Logistics Phase, and sometimes due to a combat result. To break down a brigade or regiment, remove the unit from the map and replace it with subordinate units of the type designated by the scenario.

9.2 Combine

Combining occurs only in the Logistics Phase. To Combine, remove the designated number of subordinate units from the map and replace them with an equivalent regiment or brigade. The subordinate units must all be in the same hex.

9.3 Causing Breakdowns

Certain combat results and Events may cause regiments or brigades to break down.

9.4 Restrictions

The following restrictions are in effect when breaking down and combining units:

9.41 Nationality Requisite. Units which break down and combine must be of the same nationality. See scenario instructions for details. You do not have to recombine subordinate units into the same brigade or regiment from which they broke down.

9.42 Suppression. Suppressed units may not Combine, but they may breakdown.

9.43 Initial Deployment. Players may not break down or combine units during initial deployment, unless stated in the scenarios.

9.5 Other

Players should examine the Retreat rule and various combat results for the advantages for units that can break down.

10.0 Headquarters

10.1 Support Points

Headquarters have a parenthetic attack factor numeral, representing their Support Points. They may not attack by themselves. An Activated HQ instead provides its Support Points value as combat shifts to friendly units within its Support Radius. It also allows units within its Support Radius to move during the Follow On Movement Phase.

Designer's Note: HQ Support represents the effects of artillery, combat engineers, and additional logistical support.

10.2 Follow-On Movement

All units which start within the radius of a friendly HQ may move during the Follow-On (second) Movement Phase. This is checked at the start of the Follow-On Movement Phase.

10.3 Combat

During the friendly Combat Phase, each HQ may provide its Support Value as a combat shift to the right for all attacking units within its Support Radius. During the enemy Combat Phase, each HQ may provide its Support Value as a combat shift to the left for all defending units within its Support Radius. This is checked at the instant that the combat starts (not at the start of the Combat Phase).

10.31 Singular Command. Each unit may only be supported by one HQ. If more than one HQ is within radius, then a player may, on a combat-by-combat basis, choose a single HQ to support it. Within that stricture, a given HQ may support all friendly units within radius.

10.32 Radius Requisite. To provide support, at least one friendly unit in that combat must be within radius.

Note: You do not need to use an Activated HQ to engage in combat in a second impulse, but obviously this will assist any combats you do engage in greatly. Indeed, you must engage in combat if your units are adjacent to the enemy.

10.4 Support Radius

Support radius may be traced into and through EZOC, any types of terrain, and even hexes containing enemy units. Headquarters are never affected by the outcomes of attacks they support. They defend normally if attacked. An activated HQ may apply its shifts to its own defense and second movement.

10.5 Limits

HQs support all friendly units regardless of unit identifications (unless otherwise specified by a scenario).

10.6 HQ Presence

HQs have ZOC, and do count for stacking.

11.0 Movement

A player may move all, some or none of his units during a friendly Movement Phase. Each unit may be moved as many or few hexes as the player wants, as long as its Movement allowance factor is not exceeded. Unused movement points may not be accumulated or transferred from unit to unit.

11.1 Movement Phases

Each player has two movement phases in each turn. In the Initial Movement Phase, all units may move. In the Follow-On movement phase, only units within Support Radius of a friendly activated HQ may move.

11.2 Moving a Unit

Move each unit individually from one hex to another. Once a unit has been moved, and the player's hand is withdrawn, the unit may not be moved again. During a player's movement phase, only friendly units may be moved. No enemy movement may occur during a friendly Impulse.

11.3 Movement Costs

11.31 Movement Points. Each hex entered costs a certain number of movement points (MPs) to enter, depending on whether the unit is a Mechanized or a Non-Mechanized unit.

11.32 Old Hands Note. Motorized infantry is not considered "mechanized" in the game.

11.4 Minimum Move

A unit may always move a minimum of ONE hex per turn, provided it is not moving into prohibited terrain, a hex containing an enemy combat unit, or moving directly from one enemy zone of control to another.

11.5 Prohibited Movement

A unit may never enter a hex containing enemy combat units of any kind, or terrain that it is not allowed to be entered according to the Terrain Effects Chart.

11.6 Enemy Zones of Control (see 13.0)

Units must STOP when they enter an enemy ZOC. There is no extra movement point cost to enter or exit enemy zones of control. Units may not normally move through enemy zones of control. But, see Retreat, Pursuit and Infiltration rules for exceptions.

11.7 Special Terrain Movement

11.71 Roads, Trails and Railroads. When moving along roads, trails and railroads (from one such hex to another through a connected hexside) units pay only the movement cost listed for the road, trail or railroad. This is regardless of other terrain in the hex.

11.72 Hexsides. Certain terrain runs along hexsides, such as rivers. A unit must pay an additional movement cost to cross these types of hexsides. Bridges negate the extra cost for moving across a river hexside.

11.8 Infiltration

This is explained under Zones of Control, below (see rule 13.0).

12.0 Land Unit Stacking

Stacking is having more than one friendly unit in the same hex.

12.1 Stacking Limit

The standard stacking limit is two regiments (three battalions per regiment, or a total of up to six battalions), unless specified differently by the scenario.

12.2 Supply Free Stacking

Supply units do not count for stacking.

12.3 Air/Naval Exception

Stacking applies only to land units. Air and naval gunfire units do not count for stacking. Also, markers do not count against stacking.

12.4 Stacking Limit Enforcement

The stacking limit applies only at the END of a particular phase (enemy or friendly), i.e., a player can move, retreat, and advance through a hex in excess of the stacking limit as long as the situation is restored by the end of the phase.

12.5 Overstacking

At the end of any phase in which one or more stacks of units are overstacked, the units in the overstacked hexes suffer the following consequences:

  1. HQs automatically become inactivated.
  2. Supply units may not provide supply functions.
  3. In an overstacked hex, the overstacked player may employ only units up to the normal stacking limit for combat, attacking or defending. If defending, then all defending units are subject to combat results, even though the overstacked units do not contribute combat strength points.

Note: A bombardment of a hex will affect overstacked units as well, so it is a good idea to not overstack.

12.6 Opposing Units Stacking Prohibition

Friendly and enemy ground units may never be stacked in the same hex.

12.7 Bombardment Exception

Air units may be placed in enemy hexes to execute missions.

12.8 Initial Deployment

Units must be deployed within stacking limits during initial scenario deployment.

13.0 Zones of Control

Land Units have Zones of Control (ZOCs). ZOCs represent the area a unit can influence through its firepower and patrols. All combat effective ground combat units have ZOCs. However, HQs, supply units, suppressed units and markers have no ZOCs.

13.1 ZOC Extension

A ZOC extends into all hexes and across all hexsides, unless otherwise stated in the Terrain Effects chart of a scenario rules.

13.2 Blocking ZOCs

The presence of a unit (friendly or enemy) has no effect on ZOCs.

13.3 Movement Effects

Units must STOP when they enter any enemy ZOC.

13.4 Disengagement

Units may leave an enemy ZOC. However, the first hex they enter must not contain an enemy ZOC. They can enter an enemy ZOC later in the movement phase.

Note: See 13.5.

13.5 Infiltration

Moving directly from one enemy ZOC to another enemy ZOC is called Infiltration. Infiltrating units must start a movement phase in an enemy ZOC. They then move a maximum of one hex into another enemy ZOC, and this ends their movement. Only the following units may conduct infiltration:

  • All Japanese infantry.
  • Allied commando and raider units.
  • Other units as specified by a scenario.

13.6 Combat Effects

During a combat phase, all friendly units in an enemy ZOC must attack, and all enemy units must be attacked. Exception: Supply units.

13.7 Pursuit

Units may Pursue through enemy ZOCs at no penalty (15.4).

13.8 Retreat

Units which retreat into an enemy ZOC are eliminated. See also rule 15.3.

13.9 Support Effects

ZOCs do not ever block Support Radius, or the ability of supply units to provide their logistics functions for units in adjacent hexes.

14.0 Land Combat

Land Combat occurs between adjacent opposing land units during the Combat Phase. The phasing player is the attacker, the non-phasing player is the defender, regardless of overall strategic posture. Land Combat is resolved using the Combat Results Tables (CRTs). There are two CRTs: Raid and Assault.

14.1 Attacking and Defending

14.11 Mandatory ZOC Combat. All combat units must attack all enemy units within whose ZOC they occupy. All non-phasing units in an attacking unit's Zone of Control must be attacked. This is so for both Combat Phases.

Remember! HQs, supply units, and suppressed units have no ZOC, so enemy units do not have to attack them.

Old Hands Note! Units must attack in the Second Combat Phase whether within the radius of an activated HQ or not. This means that given the double impulse turn structure, units can often be placed in positions where they will have to attack at unfavorable odds. This was the case historically.

14.12 Zero Attack-Factor Units. If zero attack factor units are adjacent to enemy units, then they must attack. If attacking by themselves, then they automatically use the lowest column on the CRT (24%-). HQs adjacent to enemy units attack with a zero strength, but they receive any shift for support values.

Example: A HQ with a support value of "1" is in the ZOC of an enemy unit. It attacks on the 25-49% column since this is the lowest column shifted one to the right.

14.13 Attacker's Prerogative. The Phasing Player determines which attacking units will attack which defending units, in any combination he desires, as long as all friendly units in an enemy ZOC participate in an attack, and all enemy units which exert a ZOC are, themselves, attacked.

14.14 One Battle per Unit per Combat Phase. No unit may attack more than once per Friendly Combat Phase, and no enemy unit may be attacked more than once per Friendly Combat Phase.

14.2 Declaring All Battles First

The Phasing Player must declare which friendly units will be attacking which adjacent defending units at the beginning of each Combat Phase (to ensure that all adjacent units are attacked) before conducting any individual battles.

14.21 Multiple Unit and Multi-Hex Battles. If a phasing unit is in the ZOC of more than one enemy unit, it must attack all of those enemy units that are not assigned to battle with some other attacking unit. For example, a lone unit adjacent to enemy units in two or more hexes would have to attack all those hexes as one combined attack.

14.22 Combining Units in a Battle. Attacking units in two or more hexes may combine their Combat Strengths and conduct a single battle together provided that all of the attacking units are adjacent to all of the defending units. Battles may involve any number of attacking or defending units.

14.23 Adjacency. For an attack to be resolved as a single battle, all of the attacking units must be adjacent to all of the defending units.

14.24 Diversionary Attacks. When organizing a series of battles, a player may allocate his attacking units in such a way that some attacks are sacrificially made at poor differentials so that other adjacent attacks may be made at more advantageous differentials.

Old Hands Note! Diversionary attacks are what used to be called "Soak-Off Attacks".

14.25 Combat Strength Unity. A given unit's Combat Strength is always unitary; it may not be divided among different battles during a single phase, either for attack or defense.

14.26 Defending. All units defending in a single hex must defend together, and their combat strengths must be added together to form a single combined total. The defender may not withhold units from the defense except per 12.5.

14.27 Attack Limitation. A defending hex may be attacked only once in a single combat phase.

14.28 Attack Resolution. Attacks are resolved one at a time.

14.3 For Each Ground Combat

  1. The attacker states which attacking units will be attacking which defending units.
  2. The attacker chooses which CRT the combat will use (Raid or Assault), except per 14.41.
  3. Determine the combat percentile: a) Total the combat strengths of all attacking units. b) Total the combat strengths of all defending units (make any provisions for terrain). c) Divide the attacker's total combat strength by the defender's total combat strength and multiply by 100%.
  4. Determine the final Column shift: a) Determine the support status of all attacking units (i.e., the number of shifts to the right for friendly HQ support). b) Determine the support status of all defending units (i.e., the number of shifts to the left for enemy HQ support). c) If any attacking unit is Suppressed shift one column to the left. d) If any defending unit is Suppressed shift one column to the right. e) Determine the number of defensive shifts for terrain. f) Subtract the defender's shift from the attacker's to get the final shift.
  5. Find the matching percentile column on the selected Combat Results Table (CRT).
  6. Roll one die, and cross-index the result.
  7. Immediately apply the combat result.
  8. Execute any retreats.
  9. Execute any advances after combat.
  10. Go on to the next combat, if any.

14.31 Column Shifts. Column shifts for the attacker always adjust to the right; for defender always adjust to the left. Use the net difference of multiple right and left shifts. The maximum columns on the CRT is the base line for any shifts above or below the maximum or minimum odds.

14.32 HQ Support. If more than one HQ can provide a column shift, only use one, but use the single best one. Each HQ may support any number of combats within its own radius.

14.33 Terrain. This applies to the defender only. If more than one terrain modifier applies, use the single best one.

14.4 Choice of Combat Results Tables

There are two combat results tables in the game: the Raid CRT and the Assault CRT.

14.41 Who Determines Which CRT Will Be Used. Generally, the attacker determines which CRT will be used. However, certain Campaign markers will give the defender the choice; see the scenario Campaign marker explanations.

In a situation where the defender chooses the CRT, the defender still remains the defender; he does not switch roles with the attacker. For example, a Japanese force (with 9 combat factors) is attacking an Allied force (with 3 combat factors). The Allied player plays an Intelligence marker and can choose the CRT. He decides that the combat will be resolved on the Assault CRT. The Japanese player executes the attack on the Assault CRT.

14.42 Combat Results. Combat Results are the outcomes of combat. They are explained adjacent to the charts themselves.

14.43 Pursuit & Retreat after Combat. These are a form of specialized movement that occur as the result of certain Combat results. They are explained below (see 15.3 and 15.4).

14.44 Attacking into Prohibited Terrain. Units may attack into terrain types they could not normally enter. Units can attack across borders at all times, though they may be restricted from advancing/retreating across them. Also, even though a unit may not necessarily be able to exert a ZOC into a certain terrain type, it could still attack into it.

15.0 Implementation of Combat Results

15.1 Order of Results

Combat results are to be implemented in the order listed for that result.

15.11 Combat Results Limitation. Only land units that participated in a given combat are affected by its results, except per 12.5, case "(3)".

15.12 Non-adjacent HQs. If an HQ provided support, it is not affected by the combat unless it was also defending in a hex that was actually attacked, or if it conducted an attack against an adjacent enemy unit.

15.2 Elimination

Eliminated units are removed from the map. If there is a choice of units to be eliminated, the player owning the units may choose which ones will be removed.

15.21 Surrounded Eliminations. If a unit is entirely surrounded by enemy units, ZOC, or prohibited terrain at the instant of combat, they are placed in the Permanently Eliminated box, and may never be replaced. Otherwise, they are placed in the Replaceable and Damaged Units box (and may be replaced).

Certain special results may also cause the permanent elimination of units.

15.22 Breakdowns. Units may be broken down during combat to extract losses. For example, an attrition type of result will allow a player to breakdown a regiment into three battalions. One of those battalions would then be eliminated to fulfill the combat result.

15.23 Percentage Losses. Certain combat results will cause a force to lose 50% of its combat factors (such as: BB). That percentage is determined by counting up the total attack factors if attacking, or defense factors if defending. If any zero attack strength units are attacking, then they are eliminated in addition to other friendly units.

15.24 Breaking Down to Fulfill Casualties. A unit may be broken down to extract 50% losses. Use the total attack or defense strength of the breakdown units to determine the losses.

15.3 Retreat

When a combat result requires units to be retreated, the player designated by the result must immediately move those units the indicated number of hexes away from their own combat position. If the combat result doesn't specifically designate one player to conduct a retreat, the owning player conducts it. Retreat is not normal movement; it's counted in terms of hexes, not movement points, and units may always retreat the number of hexes indicated regardless of their printed movement allowances.

15.31 Length. A retreat will be specified as one or two hexes, or a Rout.

15.32 Routs. The affected player rolls one die for each unit, and then retreats it that number of hexes.

15.33 Retreat Restrictions. Retreat results are subject to the following restrictions. If a unit is unable to retreat within these restrictions it's eliminated instead.

  1. Each unit is retreated separately.
  2. Units may never retreat into hexes containing enemy units.
  3. Normally, units that retreat into enemy ZOC are eliminated. But, units that can break down into battalions may do so and then one (only one) of those battalions is eliminated per hex retreated through.
  4. Units may not retreat off of the map or into terrain or across hexsides that can't normally be entered.
  5. Units may retreat into and through hexes containing friendly units, but that doesn't negate a unit's retreat obligation. Remember, though, any retreating units must be within stacking restrictions at the end of the Combat Phase; see 12.0.
  6. A retreating unit must terminate its retreat the indicated number of hexagons away from its former position. If it can't, and can retreat only a portion of the number of the hexagons called for, it's eliminated in the last hex into which it was able to retreat.
  7. In no case may a unit be retreated into a hex that would cause it to be eliminated or over-stacked if other retreat paths are available.
  8. Zero movement factor units are eliminated if forced to retreat (unless otherwise indicated).
  9. Supply units are eliminated if forced to retreat.

15.34 Cities. Units defending in a city hex may (at the player's option) ignore retreat results. Any unit that retreats into a city hex must retreat normally.

15.35 Defending After Retreating. Units that retreat into a hex that's attacked later that same phase defend normally and contribute their defense strength normally. If, however, the retreated units cause their new hex to be over-stacked they contribute nothing to the defense of that hex, though they would be subject to any combat results inflicted therein.

15.4 Pursuit

15.41 Pursuit Defined. "Pursuit" is a special form of movement that may occur after combat.

15.42 Pursuit Movement Procedure. If a combat result calls for a player to conduct pursuit, he may immediately move the number of hexes indicated with some, none, or all of his eligible units (involved in that attack). Generally, pursuit is only one hex. Scenarios will specify exceptions.

A combat result must specify "pursuit" for pursuit to occur. For example, if a Defender Attrition result causes all units to become eliminated from a hex, surviving attackers could not enter there since no pursuit was specified by the result.

15.43 Zero Attack-Factor Pursuit Prohibition. Units with a "0" movement factor may never pursue.

15.44 No MP Cost. Pursuit movement doesn't ever expend any movement points. It may be made only into hexes the pursuing units could normally enter. Pursuing units may ignore enemy ZOC, but they may not enter hexes containing enemy units or prohibited terrain. If a total pursuit is longer than one hex, some units may stop in the first hex, others in the second hex.

15.45 No Pursuit. If the enemy hex is not cleared of enemy units, then no pursuit may be conducted there.

15.5 Banzai!

The Japanese Campaign marker Banzai changes certain combat results. This marker must be played prior to the dice being rolled. See the Campaign Marker Explanation table.

16.0 Air Operations

Each player has Air Units that perform Missions.

16.1 Air Units

Air units represent one or more air unit "points", depending upon the number of symbols printed on the counter. They may be used like "change," with the player breaking them down or Combining them at any time in the game, included during combat.

Example: A player could exchange one "3" air unit for three "1" air units.

16.2 Sorties

Each air point may perform one mission per complete game turn. They may perform missions in either friendly Bombardment Phase, but if a particular air point conducts a mission in the first phase it could not do so in the second.

16.21 Air Command. Air units are always In Command.

16.3 Air Missions

Air units are not based on the map (even if there are airfields on a scenario's maps). They are placed on the Air Mission chart. They may be placed on the map to execute missions, but then are returned to the Air Mission chart (or to the dead-pile).

16.31 Mission Chart. During each Air Mission Phase, the player places his Air units in one of the missions listed on the Air Missions Chart:

  • Reserve
  • Air Superiority
  • Interdiction
  • Air Recon
  • Air Strike

Additionally, air units may be placed in the Damaged box as the result of combat, or be eliminated from play. Then, during the Air Missions Phase, move them accordingly.

Note: Air unit reinforcements are received after the Air Mission Allocation Phase, so air units received during a turn may not be used until the following turn.

16.32 Air Unit Outcomes. Each air unit is utilized at different points in the game turn, depending upon the missions. When the mission is completed, place the air units performing it in one of the following:

  1. Eliminated: remove it from play.
  2. Damaged: if it received a Damage result.
  3. Reserve if it otherwise survived.

Therefore, at the end of the player turn, all friendly air units will be in one of the three above statuses.

16.33 Repeated Sorties. Air units may be reused from turn to turn. They are not expended simply by being used.

16.34 Air Units and Combat. Air units are not affected by ground units; they are affected by enemy Air Superiority missions, and by AA results on the Strike table.

16.35 Off-Map Basing. Air units are placed on the map only when executing missions. They are not placed on airfields. Air units do not stop or block ground unit movement, retreat or advance, nor do they have zones of control. Air units (usually) require no supply. However, in certain scenarios, activating an on-map airfield may require the expenditure of supply that is then used to increase the number of air units available.

Designer's Note: The air units represent the impact of sorties, not specific air squadrons, groups, etc., per se.

16.4 Reserve

Air units in the Reserve box do not fly missions. They are not affected by enemy Air Superiority or AA fire.

16.5 Air Superiority

Air Superiority is resolved in the Air Superiority Sub-phase.

16.51 Air Superiority Procedure. Units assigned to air superiority "fire" at enemy air units. All such fire is simultaneous. Each player does the following:

  1. Totals their Air Superiority strength points.
  2. Cross indexes this with the column on the Air Superiority Table.
  3. Rolls one die.
  4. Applies the outcome. All losses are extracted simultaneously.
  5. Return all Air Superiority missions to the Recovery box.

16.52 Selection of Targets.

  1. If a player has committed a number of air points to Air Superiority equal to or less than the total number of enemy Air Superiority air points, then the player must use all of his Air Superiority points to attack enemy Air Superiority air points. Only enemy air units flying Air Superiority missions are affected by combat results.

  2. If a player has committed more air points to Air Superiority than the enemy, then the player may (but does not have to) commit any excess to attacking any and all other enemy missions. In this case, the Air Points committed to attacking non-Air Superiority missions are fired as one combined combat, and the player can select from which enemy missions losses will be extracted.

    Example: The Japanese player commits six Air Points to Air Superiority; the Allied player commits four. The Allied player would have to use all four of his Air Points to attack the Japanese Air Superiority points. The Japanese player could commit all six of his Air Points to attacking the Allied Air Superiority air units; or he could commit four or five to attacking Allied Air Superiority, and using (respectively) two or one Air Points to attack other missions. Let's say the Japanese player committed two; He rolls a "5", causing one elimination and one damage. He chooses to eliminate one Allied air point committed to (say) Interdiction and another to Strike.

  3. In both cases above, any excess eliminations/damages may not be applied against enemy air points flying missions which were not targeted.

    Example: Continuing with the above example, supposing the Japanese player committed six air points to Air Superiority and rolled a "6"; this would cause three Allied eliminations and three damages. This would eliminate three Allied air units committed to Air Superiority, and damage one more, thereby wiping out the Allied Air Superiority mission force of four air units. The additional two damages could not be applied against other Allied missions.

16.6 Interdiction

Certain scenarios will allow an Interdiction Mission. Interdiction is flown by air units against enemy land units and supply appearing as reinforcements. Interdiction may cause enemy reinforcements to be subject to delay or destruction.

Note: When conducting an interdiction mission, use the Nomonhan Reinforcement Interdiction Table (not the Air Interdiction Table, which is provided for an optional future variant).

16.61 Restrictions. Interdiction is performed during the Reinforcement Phase only. It may not be performed against any units that are making an amphibious move on the map (i.e., from coastal hex to coastal hex). Interdiction may not be performed against reinforcements being placed in an off-map base, or against units that are entering the map from an off-map base during the movement phase.

16.62 Interdiction Procedure.

  1. Declare the number of air units committed to Interdiction (either two, four, or six).
  2. Roll one die for each reinforcement unit to be attacked, applying the air units as a modifier (as listed on the Nomonhan Reinforcement Interdiction Table) to the die roll.
  3. Cross index the result with the Nomonhan Reinforcement Interdiction Table. Immediately apply that result.

16.63 Targeting. Each and every unit and supply point moving onto the map as a reinforcement would be attacked by all interdicting air units, and each targeted unit would be interdicted by a separate die roll. For example, a player could commit two air units to Interdiction. The enemy places two reinforcement regiments and four supply points. Roll once for each of the two enemy regiments and four supply points.

16.64 Results.

  1. Enters Later Turn. Place the delayed units on the Turn Record Track that number of turns later. They are then automatically received on that turn. (They cannot be Interdicted again during that turn).
  2. Elimination. If the unit can break down, it loses one battalion, and the rest of the battalions are delayed two turns. Otherwise, the unit is eliminated and placed in the Replacement box. Supply and Deception units are placed back in the counter mix.

16.65 Interdiction Effects. Interdiction affects land combat units, HQ units, Deception markers, and supply units. Interdiction does not affect the appearance of enemy air or naval reinforcements, nor does it affect enemy units already on the map. Attacks against supply units are made against individual points.

16.7 Air Recon

Recon takes place during the friendly Movement Phase. Place Air unit(s) in any hex(es) on the map and declare them as Air Recon. This may be done at any point in either movement phase.

16.71 Air Recon Procedure. Air Recon units do not attack anything, nor do they suffer AA fire. For each Air Recon unit, you may examine all enemy units in its hex and adjacent hexes. Additionally, any clear, dunes, cultivated, mud flat, marsh or coral terrain hexes within two hexes may also be examined.

You may use a maximum of one air unit per air recon per hex (and there is obviously no point in using more, since one is always sufficient).

16.8 Air Strike (Air Bombardment)

Strike (Air Bombardment) missions take place during the friendly Bombardment Phase. Place Air unit(s) in any hex(es) on the map containing enemy ground units. A player must place all Air units before conducting strikes. He then resolves them one at a time.

16.81 Procedure. For a hex to be bombarded, the following procedure is implemented:

  1. Total the number of air points.
  2. If the TEC calls for a defensive bonus, shift the column to the left the number indicated. The column may never go below zero, however.
  3. Roll one die on the Bombardment Table.
  4. Apply the results.
  5. Return all surviving Air Strike missions to the Reserve box.

16.82 Overkill. A player may utilize any number of air units against a single hex, per the scenario's rules.

16.83 Hex Targets. Air Strike missions are flown against hexes, not individual units. If there is more than one defending unit in a hex, then they may all be affected by the outcome. See the results on the Bombardment Table.

Example: If the Allied player is using three air units to attack a hex containing a Japanese combat unit and two supply units. He rolls once on the "3" column and gets an "S" result. This causes the combat unit to be suppressed and one supply unit eliminated.

16.84 Antiaircraft. Any results due to antiaircraft fire results (AA) are only applied after the bombardment is resolved, and then only a maximum of one air unit per attack is ever affected.

Note: You do not need an antiaircraft unit to inflict an AA result on attacking units. The effect of antiaircraft units are figured into the left column shift for air bombardments made against hexes containing or adjacent to antiaircraft units. See the Bombardment Table.

16.85 Bombardment Revelation Restriction. A player does not reveal any units in a hex being attacked by bombardment. They are to be attacked anyway, with results being applied only when they occur.

16.9 Air Losses

Damage: Air units that receive a Damage result (owing to air superiority or AA fire, or a specific Campaign marker event) are placed in this box. They may not fly missions, nor are they affected by enemy air superiority fire.

Elimination: An air unit that is permanently eliminated may not be repaired.

16.10 Repair

A player may repair damaged air units by expending a supply unit during the Refit Phase. One supply point can repair three air units (or a fraction thereof) in the Damaged box. Place repaired air units in the Ready box. See the scenario for specifics.

17.0 Naval Bombardment

This rule only applies to the other games in the Pacific Battles series.

18.0 Fog of War

Players are limited as to when they can examine enemy units. Generally, you can examine enemy stacks only under certain conditions:

18.1 Examining Units. A player may examine enemy units at the start of the friendly Combat Phase if he has friendly units adjacent to any such units.

18.2 Air Recon. A player may examine enemy ground units via Air Recon (see 16.7). Also, when conducting bombardment against a hex, the player determines outcomes against enemy units normally, but they are not flipped over.

18.3 Air Ops. A player must show the number of air units being used to execute a mission as it is being executed.

18.4 ZOC Announcement. A player must always inform the enemy whether or not units in a stack have ZOCs at the instant a friendly unit moves adjacent (though not necessarily the identity of the units in the stack).

18.5 Terrain Examination. A player may always examine the terrain in a hex under a stack of units. Also, the player must inform the enemy of the presence of any fortifications.

18.6 Reinforcements. A player may never examine enemy units presently on their turn record/reinforcement track.

18.7 Command Markers. Certain Campaign markers will allow the player to examine enemy stacks or units on the reinforcement track.

18.8 Optional Fog of War Rules. See the optional Fog of War rule for more complications (see 34.0).

19.0 Headquarters (HQs)

Headquarters function as other land units, with the exceptions summarized here:

19.1 Follow-On Movement. An Activated HQ will allow all friendly units within Support radius to use Follow-On movement.

19.2 Support Points. An Activated HQ may use its Support Points value to provide combat shifts to friendly units within its Support Radius.

19.3 Suppression. Anything that causes an HQ to become suppressed causes it to instead become un-Activated. If already un-activated, then there is no further effect.

Designer's Note: HQs represent the command control for artillery, combat engineers, and logistics units that are spread out through an area of operations. Consequently, they represent a center of mass for support operations rather than a specific individual unit.

20.0 Engineer Units

Engineer units in the game represent major concentrations of Engineering personnel and construction equipment. Combat effective engineer units provide the following functions in the game:

  1. Airbase Operation. Certain scenarios will have printed airbases on the map. A player must have an Engineer unit in that airbase to "operate" it. This will result in the player receiving additional air units.
  2. Bridging. If an engineer unit starts its movement adjacent to a stream and/or a river hexsides, then the movement cost for all other friendly units to cross that stream/river is zero; other terrain costs would still be paid normally, however.
  3. Building Fortifications. An engineer unit may build fortifications in a friendly Logistics Phase. It must be combat effective and in the same hex as or adjacent to a Supply unit. Expend the supply unit and place fortification markers in the engineer's hex, and in any adjacent hexes occupied by friendly units. If more than one engineer unit is adjacent to the same supply unit, they may all build fortifications. See 21.0.
  4. Mobility Enhancement. An engineer unit which starts its movement phase in the same hex as a supply unit may "pick up" one supply point and transport it, using the movement factor of the engineer. At the end of that move, the supply unit must be dropped off.
  5. Other: As specified by the scenario.

21.0 Fortifications

Fortification markers enhance defense in the following ways.

21.1 Defensive Shift. If any defending unit is in a fortification, that entire combat receives one additional column shift for defense. This is in addition to any normal terrain shifts.

Note: Japanese gain a two-column shift while the Allies gain a one column-shift.

21.2 Ignoring Retreats/Routs. Any unit defending in or attacking out of a fortification may ignore one-hex retreat results, and convert two-hex rout results into one-hex retreats.

21.3 Fortification Permanence. Once placed on the map, a fortification marker remains in play as long as there is at least one friendly unit in it. The instant that all friendly units have vacated the fortification's hex (via movement or via combat or whatever), the fortification is removed from play. Players may not capture and use enemy fortifications.

22.0 Amphibious Movement

This rule only applies to the other games in the Pacific Battles series.

23.0 Evacuation

Certain scenarios allow for Evacuation. This removes units from the map during the friendly Reinforcement phase. Units to be evacuated must be on a coastal hex. Simply pick them up and remove them from the map. But once evacuated, they are never returned to play.

23.1 Scenarios will specify which units may be evacuated. In some cases, players may receive victory points for evacuated units.

24.0 Victory Conditions

Players win the game by accumulating Victory Points (VP). Throughout the course of the game, players score VPs. These are recorded using pen and paper.

24.1 Scoring VPs:

  • Immediate: Certain events will cause VPs to be scored immediately. For example, eliminating enemy units.
  • End of Turn: Certain events will cause VPs to be scored during the Victory Phase. For example, holding a particular objective hex.
  • Campaign Victory: Each scenario will list the specific Victory Points and the Victory Conditions for the game.

24.2 Campaign Victory Conditions

At the end of the scenario, check the number of VPs gained by both players. Subtract the lower amount from the higher. This will give the level of Victory.

  • Draw: 0-15
  • Marginal Victory: 16-30
  • Major Victory: 31-45
  • Decisive Victory (highest): 45 or more.

24.3 Sudden Death Victory

If during any Victory Determination Phase (at the end of the turn), one side attains their Sudden Death Victory Condition, the game comes to an end and they win.

24.4 Eliminating Units

VPs may be scored for eliminating units. This includes units that are replaceable or not.

Note: If any regiment is eliminated, it is equivalent to three battalions in terms of VPs awarded.

24.5 Evacuating Units

VPs may be scored for evacuating units.

24.6 Objective Hexes

Certain, specific hexes are indicated as being Objective Hexes. Players gain additional VPs for occupying them, depending on the scenario.

25.0 Nomonhan (Khalkhin-Gol) Campaign Scenario

The printed heading reads "NOMOHAM (KHALKIN-GOL) CAMPAIGN SCENARIO"; "NOMOHAM" is a misprint for Nomonhan and is corrected here. The spelling "KHALKIN-GOL" is kept as printed.

25.1 Game Length. Historical Scenario: May to September 1939. Optionally: players can, by mutual consent, extend the game to October 1939.

25.2 Initiative. The USSR controls the initiative on Turn 1.

25.3 Victory.

Starting Victory Points: Japanese = 0. Soviet = 0.

Japanese Sudden Death Victory: If during any Victory Check phase the Japanese occupy Nomonhan and seven or more other objective hexes.

Soviet Sudden Death Victory: If during any Victory Check phase the Soviets occupy Nomonhan and seven or more other objective hexes.

25.4 Soviet (set up first)

a) Land Units: West of the Khalkhin Gol River: 15, 17 Mongolian cavalry. In the Tamsag box: 36 HQ; 11th armor brigade; 24, 76, 149 motorized infantry; 36 armor battalion; 36 armored recon battalion; 7BG infantry; 1 x supply point.

b) Air units: Reserve: 1 x airstrike.

c) Starting Command Level: "start scenario".

d) Command Marker picks: See the Soviet Command Marker table.

25.5 Japanese (set up second)

a) Land Units: East of the Khalkhin Gol River: 23 armored recon; 4, 5, 12 Manchukuoan cavalry. In the Hailar box: 23 HQ; 64, 71, 72 regiments; 1/8 BG, 2/8 BG battalions; 1 x supply point.

b) Air units: Reserve: 3 x air units.

c) Starting Command Level: "start scenario".

d) Command Markers: 1 x Banzai!; place remainder in the Pool.

e) Command Marker picks: See the Japanese Command Marker table.

25.6 Soviet Reinforcement Deployments:

a) Air units: place in the Reserve box.

b) Land units: Place in Tamsag box or friendly west map edge. See the Soviet Reinforcement Chart for units and turns of arrival. Certain Reinforcement groups are received via the pick of a Reinforcement Group campaign marker. Units are received on the turn indicated, subject to delays and destruction caused by the Nomonhan Reinforcement Interdiction Table.

c) Evacuation: the Soviet player may not evacuate units.

d) Optional Soviet reinforcements. The Soviet Player may choose to receive these units by paying 3 VP per unit. This may be done only after the 1st Army Group marker has been played.

25.7 Japanese Reinforcement Deployments:

a) Air units: place in the Reserve box.

b) Land units: Place in Hailar box or any friendly map edge in Manchukuo. See the Japanese Reinforcement Chart for units and turns of arrival. Certain Reinforcement groups are received via the pick of a Reinforcement Group campaign marker. Units are received on the turn indicated, subject to delays and destruction caused by the Nomonhan Reinforcement Interdiction Table.

c) Evacuation: the Japanese may not evacuate units.

d) Optional Japanese reinforcements. The Japanese Player may choose to receive these units by paying 3 VP per unit. This is done on a unit by unit basis; the player may choose some, none or all of these units.

26.0 Scenario Special Rules

26.1 Airfields. There are no airfields on the map. All air units are considered to be based off map.

26.2 Home Bases (off map). The Japanese base is Hailar. The Soviet base is Tamsag. These are represented by off map boxes. Reinforcement units may be placed in the off-map base. You may move units in the off-map base onto the map via a friendly map edge during a movement phase. The units are assumed to be one hex off the map, and may use road movement if a road leads off the map. Once on the map, units may not move off map.

26.3 Friendly Map Edges. The Japanese friendly map edge is the north and east edge in Manchukuo. The Soviet friendly map edge is the west map edge.

26.4 Out of Range. A player's units may neither attack nor enter the enemy Base.

26.5 Logistics. One supply unit in an off map base activates all HQs in it.

26.6 Repairing Damaged Aircraft Home Bases. A player can expend one supply unit in the friendly off-map base to repair up to three friendly aircraft in the Damaged box.

26.7 Airstrike Limit per Hex (rule 16.82).

  • Japanese: four.
  • Soviet: three.

26.8 Interdiction. A Player can commit two, four or six air points to Interdiction. This causes each enemy reinforcement HQ, combat unit, supply point and deception marker for that turn to roll on the Nomonhan Reinforcement Interdiction Table. This may result in delay or destruction of the unit. See the Nomonhan Reinforcement Interdiction Table.

26.9 Breakdown Units.

Japanese:

  • 6-6-12 = 1 x 2-2-12, 2 x 1-2-12
  • 5-5-10 = 3 x 1-2-10
  • 5-4-10 = 2 x 1-2-10, 1 x 1-1-10

Other units may not break down.

Soviet:

  • 12-8-14 = 3 x 3-1-14 and 1 x 1-2-14
  • 9-6-14 = 2 x 3-1-14 and 1 x 1-2-14
  • 2-4-12 = 4 x 0-1-12
  • 2-3-12 = 3 x 0-1-12
  • 3-4-8 = 3 x 0-1-8
  • 2-4-8 = 4 x 0-1-8
  • 2-3-8 = 3 x 0-1-8

Other units may not break down.

Note: Once the Soviet airborne brigade breaks down, it may not be rebuilt.

26.10 Airborne. No airborne drops are allowed in the game.

26.11 Manchukuoan-Mongolian Border. Units may cross this freely.

26.12 Autumn Weather. If the game is played to October, then neither player receives any Routine supply or air reinforcements on that turn.

Abbreviations:

Japanese:

  • BG: Border Guard
  • H: Hsinghan
  • IG: Independent Garrison
  • KA: Kwangtung Army
  • M: Manchukuoan (Manchurian)
  • Sek: Sekhiran
  • Yok: Yosuoka

Soviet:

  • BG: Border guard
  • COG: Central Operations Group
  • M: Mongolian
  • MG: Machinegun
  • NOG: Northern Operations Group
  • SOG: Southern Operations Group
  • 57c: 57th Corps
  • 57d: 57th Division
  • OT: Soviet abbreviation for flamethrower

27.0 Pacific Battles Optional Rules (27.0 - 35.0)

27.1 Campaign Markers and Expending VPs. A player may expend Victory Points to pick additional campaign markers. This is during the Campaign Markers phase.

27.2 Procedure. A player expends two VPs to pick one additional Campaign marker. The player picks the additional marker and then must play it.

A player may pick a number of Campaign markers equal to up to his normal allotment for a turn. For example, say a player normally could pick three Campaign markers. That player could expend two, four or six VPs and pick one, two or three more markers.

28.0 High Ground

If a Combat Effective HQ occupies a mountain, hilltop or ridge hex, its support radius is increased by two hexes.

29.0 HQs and Artillery Fires

A player may use his Activated HQs to fire artillery. This is done during the friendly Bombardment phase.

Procedure

  1. The HQ must be in or adjacent to a hex with a friendly supply unit. Expend a supply unit (this is on top of the supply unit used to activate the HQ in the Logistics phase and is done during the Bombardment phase).
  2. Indicate a target hex that must be within range of the HQ. Range is equal to support radius. The target hex must contain enemy units.
  3. Use the HQ support value as the bombardment strength. Follow the same procedure for Bombardment and apply the results. ("AA" results have no effect on HQs.) Artillery fire may be combined with air and naval fire.

29.1 Limits. Japanese and Soviet: may combine up to two HQs firing into the same hex.

29.2 Optionally. An HQ does not have to use its support value as a whole against one hex when conducting artillery fire. It may be broken down into integral values.

Example: An HQ with a support value of "3" could fire one bombardment with a strength of "2" and a second against another target with a value of "1".

30.0 Air Superiority (More)

If a player has more than eight air points committed to Air Superiority, then the excess above eight are fired as a separate combat.

Example: A player commits 10 air points to Air Superiority. He fires eight, applies their results, then fires two more. No air unit, however, may ever be affected by more than one elimination or damaged result.

31.0 Close Air Support

Certain scenarios allow for Close Air Support. The attacker may, when setting up land attacks, add air units committed to the Close Air Support mission to any ground combat.

31.1 Close Air Support Procedure. Add Close Air Support air units to attacking ground units. For each air unit, the combat is shifted one column to the right. At the completion of the combat, place the air units in the Reserve box.

31.2 AA Fire. At the completion of the ground combat, roll one die for each air unit. On a "6" the unit is damaged. Place it in the Damaged box. If the hex contained or was adjacent to an enemy AA unit, then an air unit is damaged on a "5-6". Otherwise, close air support missions are not affected by land combat results.

Limits. The number of close support air units that may be assigned to each individual combat (if any) is set by the scenario.

32.0 Capturing Supply

If a player's units attack a hex containing an enemy supply unit and completely eliminate all defending units in it (including the supplying units), and there are supply units in that hex, and they advance after combat into the hex, then check for capture.

Procedure

For each supply point in the hex roll one die: on a 1-3 the enemy supply unit is captured; on 4-6 the supply unit is eliminated. Eliminate a captured enemy supply unit and replace it with a friendly supply unit in the same hex.

33.0 Airborne Landings

Certain scenarios will allow airborne landings. Only combat effective airborne units may conduct them.

33.1 Airborne Procedure. The airborne unit must start in a friendly activated airfield. Move it to any land hex on the map which it could otherwise enter, and which contains no enemy units. It may move over enemy units and ZOC. Then roll on the Airborne Landing table and apply the result.

33.2 Reinforcement. An airborne unit which is slated as a reinforcement may instead enter via airborne landing if the scenario allows for it.

33.3 Interception Immunity. Airborne units may not be intercepted by enemy air, nor are they subject to enemy air superiority fire.

Airborne Landing Table (if scenario allows airborne landings)

Die rollResult
1Unit lands in target hex.
2Unit lands in target hex.
3Unit lands in target hex.
4Unit lands in target hex.
5Unit scatters.
6Unit lands in target hex and is Suppressed.
7Unit lands in target hex and is Suppressed.
8+Unit scatters and is Suppressed.

Die roll modifiers (cumulative):

  • +2: Target hex within two hexes of an antiaircraft unit.
  • +1: Target hex adjacent to another enemy unit.
  • +1: Target hex contains terrain other than clear, airfield or village.

Scatter: Roll one die. On a "1" the unit lands in the hex north of the target; on a "2", the next hex clockwise, etc. to 6. If the unit lands in a hex containing enemy units or prohibited terrain, it is eliminated.

34.0 Optional Fog of War

Players may deploy their combat units face down. This is their fog of war side. Fog of war status units operate normally, except that it will be more difficult for the enemy to figure out what is in each hex. They are revealed (flipped face up) at the instant of ground combat or via any action that would allow a player to examine the units in a hex.

The player may flip a face up unit to its fog of war status during the friendly logistics phase.

A player may flip a unit in its fog of war status face up at any time in the game turn.

34.1 Deception Markers. A player receives Deception markers as per the scenario. They are placed face down initially. They are placed on or adjacent to any friendly unit as long as the hex of placement is not adjacent to a unit. Additionally, they may be placed in the location for any reinforcement units for that turn.

34.2 Revealing. The instant that any event would cause units in a hex to revealed, deception markers in that hex are removed from the map. They may be reused later if a scenario calls for them. Otherwise, they may not be rebuilt.

34.3 Operation. Deception markers have unlimited movement. They may be moved by the player either as mechanized or non-mechanized units. The instant that a Deception marker moves adjacent to an enemy land unit, or vice versa, they are flipped face up and removed from play.

34.4 Reinforcements. Deception markers that are received as reinforcements are subject to the delay die roll if part of a reinforcement group which are otherwise delayed. Otherwise, they are received on turns indicated. They can also be delayed or eliminated by Interdiction Attacks.

35.0 Nomonhan Optional Scenario Rules

35.1 Historical Reinforcements. Players who want to recreate the actual reinforcement schedule of the original campaign should play these Campaign markers at the indicated dates.

Japanese:

  • 2nd Air Division: June 1939
  • Sixth Army: July 1939
  • Kwantung Army Reserves: September (second group appeared after the ceasefire)

Soviet:

  • 57th Corps: June 1939
  • Zhukov: July 1939
  • 1st Army Group: August 1939

35.2 Deception Markers. Players receive deception markers as follows:

Japanese:

  • Initial deployment: three
  • Each turn starting with May: one per turn.

Soviet:

  • Initial deployment: three
  • Each turn starting with May: one per turn.

Source Gaps

  • The rules PDF (World at War 32) contains the rules text only. The printed charts are not in this file: the Combat Results Tables (Raid and Assault), Air Superiority Table, Bombardment Table, Nomonhan Reinforcement Interdiction Table, Air Missions Table, Terrain Effects Chart, the Campaign Marker Explanation Table, the Soviet and Japanese Command Marker tables, and the Soviet and Japanese Reinforcement Charts. Rules that point to them are transcribed as printed; the unit lists in sections 25.4 to 25.7 refer to those charts for arrival turns and marker picks, so those details are not reproduced here.
  • The sample counter illustrations in sections 2.3 and 2.31 are pictures on the printed sheet and are not reproduced.
  • Trivial printed typos were corrected in the running text where the meaning is unambiguous: "to not" in the 7.3 note now reads "do not", "inlcuding" in 32.0 now reads "including", and the cross-reference "k(15.4)" in 13.7 now reads "(15.4)". The one heading typo, "NOMOHAM", is noted in section 25.0.
  • Printed errata within the rules are kept as labelled Errata notes in place.