RulesPal
Chat
Rulebook
Mythic Gems thumbnail

Mythic Gems

Mythic Gems Rulebook

Table of Contents

Table of Contents

  • Equipment
  • Setup
    • Sample Game Set-Up
  • Taking a Turn
  • Finishing the Game
  • Action Tokens
    • Action Token Quantities
  • Alternate Ways to Play
    • Special Ability Cards
    • Single Player Alternative
  • FAQ
  • Single Player Variant
    • Objective
    • Setup
    • Gameplay
    • Winning the Game

Equipment

  • 4 Environment Boards
  • 1 Start Board and Finish Board
  • 20 Mythic Gems
  • Action Tokens (a token bag)
  • 10 Special Ability Cards
  • 2 dice
  • Explorers
  • Reference Cards

Setup

  1. Separate the Mythic Gems from the Action Tokens.
  2. Place the Action Tokens in the token bag and mix them up.
  3. Determine whether the game will include three or four Environment Boards.
    • It is recommended to use three boards for a shorter game or four boards for a longer game.
    • If three boards are selected, use a majority vote to determine which Environment Board is removed from play.
    • If an Environment Board is removed, also remove the corresponding Mythic Gems from play.
  4. Have a player shuffle the Environment Boards. Randomly place the boards on the playing surface with bridges aligned along the long edges.
  5. Next to each Environment Board, place the same number of Mythic Gems as there are players.
    • i.e. 3 players = 3 Mythic Gems per environment.
  6. Have every player roll one die. The player with the highest roll 1) places the Start and Finish Boards and 2) plays first.
    • In the case of a tie, the players who tied roll again.
    • Align the Start Board along any Environment Board, connecting the single-arrow edges.
    • Align the Finish Board along any Environment Board, connecting the double-arrow edges.
  7. Place all Explorers on the Start Board on the START spot. Distribute the matching Reference Card to each player based on Explorer color.

Sample Game Set-Up

Key to the sample set-up diagram:

  • Arrow Space: Connects the Start Board and Finish Board to the Environment Boards; each acts as a space during movement.
  • Mythic Gem Spot: Collect a Gem by landing on, or passing over, this spot on any Environment Board during movement.
  • Movement Spaces: Used to travel across boards during movement.
  • Bridge Space: Connects Environment Boards; each acts as a space during movement.
  • Secret Passages: One on each Environment Board; choose which of these spaces to travel to when a Secret Passage Action Token is activated.

Notes to the sample set-up:

  1. Place boards side-by-side, with the long edges touching and bridges lined up.
  2. Next to each Environment Board, place the same number of Mythic Gems as players.
  3. Players may collect up to five un-played Action Tokens on their Reference Card.
  4. During gameplay, to play an Action Token, place a token face-down on a space.
  5. Store collected Gems on the corresponding Gem spot on the Reference Card.
  6. Multiple Explorers can occupy the same space.
  7. If Secret Passages are not activated with an Action Token, Secret Passages behave as normal spaces during movement.
  8. Bridge Spaces out at the perimeter of an Environment Board act as a normal space. These may not be used to travel to bridges on the other exterior Environment Board.

Taking a Turn

On each turn, a player must perform all three steps in the following sequence:

  1. Either DRAW or PLAY an Action Token.
    • To DRAW: Select an Action Token from the token bag – do not show the selected token to other players – and review the Action Token description before adding it to your personal collection.
    • To PLAY: Select an Action Token from your personal token collection and place the token face-down on a space on any Environment Board (or activate the Shield Action Token).
  2. Roll dice.
  3. Move your Explorer the combined number of spaces shown on the dice.
    • A player can move one space at a time in any direction (except diagonally).
    • A player can move in one direction and then return over the same space(s) during the same turn.
    • A player can only cross from one board to another at bridges and arrows when boards are touching. Each bridge and arrow spot is a separate space to pass over or land on.
    • A player must move the total number rolled and may not stop short.

The turn is over after all three steps have been completed by the player. Play continues clockwise, beginning the turn of the next player.

Finishing the Game

  • Collect a Mythic Gem from each Environment Board by landing on, or passing over, the Mythic Gem Spot.
    • Mythic Gem spots may be passed with no Mythic Gem collected if the player has already collected the Mythic Gem from that Environment Board.
    • A player may not collect more than one Mythic Gem from an Environment Board.
  • After collecting a Mythic Gem, players still finish movement from the roll.
  • The first player to acquire a Mythic Gem from each Environment Board and navigate their Explorer to the FINISH spot WINS THE GAME!

Action Tokens

  • To begin each turn, either DRAW one Action Token from the token bag or PLAY an Action Token. Keep the Action Token drawn or played secret from other players until activated.
  • To PLAY: Place an Action Token face-down on a space (or play the Shield Action Token directly). Action Tokens may not be moved and cannot be looked at until activated (not even by the player who placed the Action Token).
  • Action Tokens cannot be placed on the Environment Board where the player's Explorer currently is.
  • Action Tokens cannot be placed on, or directly next to:
    • Secret Passages
    • Mythic Gem spots
    • the START spot
    • the FINISH spot
    • a space an Explorer is occupying
    • a space an Action Token is occupying
    • Arrow Spaces
    • Bridge Spaces
  • Only one Action Token is allowed on the Finish Board at any given time.
  • A player may collect up to five un-played Action Tokens. During the next turn, a player must play or discard one of their Action Tokens.
  • As a player's Explorer lands on, or passes over, any Action Token throughout their movement, the Action Token becomes activated. The player must stop their movement, even if they have not yet moved the full number of spaces from the roll, and immediately perform the corresponding action(s) associated with the Action Token.
  • If the player completes the action(s) associated with the Action Token during the turn it was activated, continue moving the Explorer the remaining number of spaces from the initial movement roll.
  • Once the action(s) associated with the Action Token have been fully completed, the Action Token is removed from play into a discard pile.

Action Token Quantities

  • (S) Shield: 4
  • (ES) Extra Stamina: 8
  • (SP) Secret Passage: 4
  • (A) Airlift: 4
  • (BR) Board Rearrange: 4
  • (GP) Grassy Patch: 8
  • (SW) Spider Web: 6
  • (MT) Mud Trap: 6
  • (BH) Black Hole: 4
  • (FR) Falling Rocks: 4
  • (Q) Quicksand: 4

Total Action Tokens: 56

Alternate Ways to Play

Special Ability Cards

  • Shuffle the Special Ability Cards and place them in a stack.
  • After the order of players has been decided, have each player draw a Special Ability Card.
  • Players do not need to show Special Ability Cards to others until using the card.
  • Begin gameplay.

Special Ability Cards supersede existing rules.

Single Player Alternative

The printed rulebook directs players to scan a QR code with a camera app to unlock the Single Player Variant, created to allow players to explore the land of Mythic Gems alone, playing against Simulated Explorers and using existing components. The text of that variant is transcribed in the section below.

FAQ

The following questions and answers are from the official Mythic Gems FAQ published by TNT Creative Gaming.

Do you start with 5 Action Tokens? No, you start with 0 and can collect up to 5 total Action Tokens.

After playing a Shield, if your movement finishes on an Action Token, do you activate it? No, but if someone else activates it while you are still on it, you partake in the effect.

If you activate a Spider Web, but still touch the FINISH spot during your roll, do you win? Yes, you were the first Explorer to reach the FINISH spot and the game ends before the Action Token would take you back to that spot.

If I activate a Board Rearrange Action Token, do I get to move the Environment Boards, or does the person who placed the Action Token get to rearrange the Environment Boards? The person who activated the Action Token rearranges the Environment Boards.

If I activate a Board Rearrange Action Token, what are the restrictions for aligning the Environment Boards? It is required that the single arrow from the Start Board must align with a single arrow from any Environment Board, the double arrows from the Finish Board must align with both arrows from any Environment Board, and the Environment Boards should have both sets of bridges touching both sets of bridges from another Environment Board. As a house rule, you can choose to align a single bridge on one Environment Board with a single bridge on another Environment Board, but this could affect the length of play.

What happens if I activate a Spider Web and the path I want to take has me pass over an active Mud Trap? You would be stuck in the Mud Trap as if you had landed on it during normal movement, because the trap was already activated.

Single Player Variant

The following is the official Single Player Variant published by TNT Creative Gaming. The source text reads "Mystic Gem" in places; this is the Mythic Gem.

Objective

Your objective is to obtain a Mystic Gem from each Environment Board and make your way to the FINISH spot on the Finish Board before the Simulated Explorer(s) beat you there.

Setup

  1. Remove the Shield (S), Quicksand (Q) and Board Rearrange (BR) Action Tokens from the Action Tokens. Place the remaining ones upside down on the table so that they are well mixed.
  2. Set up Environment Boards (choose 3 - 4) in the same way as the standard gameplay. Align the Start Board along one of the two outermost Environment Boards, connecting the single-arrow edges. Align the Finish Board along the opposite outermost Environment Board, connecting the double-arrow edges.
  3. Place an Action Token on allowable spaces, per standard gameplay rules, where three paths meet on all of the Environment Boards (4 or 5 Action Tokens per board depending on the Environment Boards selected).
  4. Place your Explorer on the START spot with the number of Simulated Explorers you would like to play against.

Gameplay

Your Explorer will move first. On your turn you will roll the dice, move the number of spaces you roll, activating any Actions Tokens you pass over, or land on, just like in the standard gameplay.

For Simulated Explorers, roll the dice at the start of their turn. Move the designated number of spaces from one board to the next, switching which direction they move on each board.

  • Example: On the Start Board, a Simulated Explorer always turns right at an intersection (when viewed from the moving direction of the Simulated Explorer). Then, on the first Environment Board, a Simulated Explorer will always turn left until they reach a bridge taking the Simulated Explorer to the next Environment Board.
  • A Simulated Explorer may reach a dead end. At this point, turn the Simulated Explorer around and continue following that board's left or right movement rule.
  • When a Bridge Space is landed on, the Simulated Explorer must move to the Bridge Space on the adjacent board, even if it is contrary to that board's required turning direction.

Simulated Explorers do not activate Action Tokens, nor do they cross a bridge if it should lead them away from the Finish Board.

Winning the Game

You win if you obtain a Mystic Gem from each of the Environment Boards and beat the Simulated Explorer(s) to the FINISH spot. If not, try again!

  • If the token bag is empty, add the discard pile of Action Tokens to the token bag, shake, and reintroduce into play.