RulesPal
Chat
Rulebook
Minden 1759 thumbnail

Minden 1759

Minden 1759 Rulebook

Table of Contents

Table of Contents

  • Introduction to the System
    • 1.0 The Basics of the "SYW Battles System"
    • 1.1 Scale
    • 1.2 Contents of a Game
    • 2.0 Game Components & Concepts
    • 2.1 The Game Map
    • 2.2 The Rulebooks
    • 2.3 The Orders / Organisation Sheets
    • 2.4 The Counters and Markers
      • (2.4.1) Leader Counter
      • (2.4.2) Infantry & Cavalry Brigade Counter
      • (2.4.3) Infantry & Cavalry Square Counter
      • (2.4.4) Artillery Counter
      • (2.4.5) Baggage Counter
      • (2.4.6) Order Marker
      • (2.4.7) Other Markers
    • 2.5 The Order of Battle in the Playbook
    • 2.6 The Game Turn Record Track
    • 2.7 The Terrain Effects Table
    • 2.8 The Fire Combat Charts
      • (2.8.1) The Relative Firepower Tables
      • (2.8.1.1) For Firing Artillery
      • (2.8.1.2) For Firing Infantry
      • (2.8.2) The Fire Combat Results Table
    • 2.9 The Charge Chart (see details in H.0)
      • (2.9.1) The Charge Opponent Ratio Table
      • (2.9.2) The Charge Results Table
  • Standard Rules
    • 3.0 Formations & Facing
    • 3.1 Infantry and Cavalry
      • (3.1.1) Units in Line Formation
        • (3.1.1.1) Definition & Historical Usage
        • (3.1.1.2) Methods & Restrictions
      • (3.1.2) Units in Adapted Formation
        • (3.1.2.1) Definition & Historical Usage
        • (3.1.2.2) Methods & Restrictions
      • (3.1.3) Units in Dispersed Formation
        • (3.1.3.1) Definition & Historical Usage
        • (3.1.3.2) Methods & Restrictions
  • Detailed Sequence of Play
    • A.0 Set-Up and Arrival of Troops
      • A.1 Set-Up of Armies
      • A.2 Arrival of Units (1st half hour turns only)
        • (A.2.1) Approach March Table
        • (A.2.2) Random Arrival Times
    • B.0 Initiative
      • B.1
      • B.2
      • B.3
    • Alternative Phases for the Two Players
      • C.0 Phase of the Generals in Chief
  • Line/Wing and Corps Phase
    • E.0 Phase of a Line/Wing Leader, if any, or a "Corps" Leader
      • E.1 For one Line/Wing or "Corps" Leader of the Player who has the Initiative for this Turn
        • (E.1.1) Selection of a Line/Wing or "Corps" Leader
        • (E.1.2) Selection of a Large Line of Brigades from Several "Corps"
          • (E.1.2.1) In General
          • (E.1.2.2) Requirements
          • (E.1.2.3) Formation Details
          • (E.1.2.4) Extended Example of Large Line
          • (E.1.2.5) Large Line for Prussian Army
          • (E.1.2.6) Extended Example of Prussian Large Line
  • Reciprocal Phases
    • G.0 Fire Procedure (reciprocal)
    • G.1 Arc of Fire
      • (G.1.1) Definition
      • (G.1.2) Illustrative Examples
      • G.2 Line of Sight (= LOS)
        • (G.2.1) Determining LOS
        • (G.2.2) Blocking Terrain & Elevations
        • (G.2.3) Gently Rolling Terrain
        • (G.2.4) Upslope & Downslope
        • (G.2.5) Illustrative Examples
      • G.3 Fire Phase for Unlimbered Artillery
  • Charge Phase
    • H.0 Charge Procedure (reciprocal)
    • H.1 Charge Phase
      • (H.1.1) Terrain Restrictions
        • (H.1.1.1) In Clear, Difficult, Marsh, & Hard Cover
        • (H.1.1.2) In Wood, Forest, & Soft Cover
      • (H.1.2) Unit Type Restrictions
      • (H.1.3) Per Unit Limit of Only One Charge per Phase
      • (H.1.4) Single Unit Charge
      • (H.1.5) Multiple Units Charge
      • (H.1.6) Units with All Around or No Facing
      • (H.1.7) Reciprocal Resolution
  • Results Tables
    • Fire Combat Results Table
    • Charge Results Table
  • Minden 1759 Errata & Clarifications
    • Errata
    • Fixes
    • Clarifications
    • Questions and Answers

Introduction to the System

For rules references, those with only numbers refer to the Introduction and those with letter and number refer to the Detailed Sequence of Play. Each Playbook gives the details needed for a specific game, including any special rules, historical and "what if" scenarios, set up information, historical notes and Order of Battle.

1.0 The Basics of the "SYW Battles System"

The "SYW Battles System" is a rules system for simulating the Battles of the Seven Years War in Europe, between 1756 and 1763.

The intent of the designer is that each player commands one army composed of lines of infantry, wings of cavalry, special detachments, Brigades, batteries of guns, battalions of infantry and "divisions" of one, two or three squadrons.

The "SYW Battles System" can be used to simulate battles ranging in size from 20,000 combatants to hundreds of thousands.

1.1 Scale

Each hex on the map equals 200 to 250 meters, depending on the battle simulated.

For a proper map reading, there is only one elevation per hex. The elevation scale can be different for each game but is usually 20 m per level.

Each turn represents half an hour and is made up of several successive phases spread over 30 minutes.

Counters represent one Brigade (or one "1/2 Brigade" for very large Brigades of at least seven battalions), one battery, one battalion, or one, two or three squadrons.

Design Note: The frontages occupied by the Unit counters represent not only the actual frontage of the men but the maintained intervals on the flanks of the formation as well.

1.2 Contents of a Game

  • A1 size hexagonal map (and additional maps if necessary)
  • One 40-page "SYW Battles System Rules" booklet
  • One 28-page "SYW Battles System Simple Rules" booklet
  • Two Playbooks with Historical Notes, several Scenarios, Orders of Battle: one per player
  • Front & back colour printed Counters Sheets
  • A3 Orders/Organisation Sheets (and additional A4 Sheets if necessary)
  • Front & back colour printed Player Aid Cards
  • (One six sided die is needed but not included)

2.0 Game Components & Concepts

2.1 The Game Map

The map depicts the area on which the battle was fought. There is no numbering system to identify each hex. The initial positions of the troops are shown in the scenarios.

2.2 The Rulebooks

Every game contains two "SYW Battles System" Rulebooks (one for Simple rules and one for Standard rules) and two Playbooks (different for each player).

2.3 The Orders / Organisation Sheets

These Orders/Organisation Sheets show for each player the detailed order of battle and organisation of his army: all units or leader counters not on the map must be put on these Sheets to reflect, at any time, the exact situation of his army.

Beside each Line/Wing leader or "Corps" leader, two "Orders in Transit" boxes are displayed: each player must move Orders currently in one of these "Orders in Transit" boxes down one level (see details in C.1.2 and C.1.3).

This phase reflects the movement of orders as they are carried from a player's General in Chief (or from the player's Second General, if any) to the Line/Wing leaders (if any) or "Corps" leaders.

The descending chain of command in this game is:

General in Chief
   |
(Second General)
   |
(Line/Wing leaders)
   |
"Corps" leaders
   |
Brigades, Units and/or Batteries

2.4 The Counters and Markers

The primary combat unit in this game is the infantry or cavalry Brigade, which can vary in strength depending on the number of battalions or squadrons in the particular Brigade. The artillery units represent batteries for each side. There is only one type of cannon per unit (3, 6, 9, 12 pdr cannons, howitzers, etc.), so a battery is usually made up of several artillery units.

Individual Brigades or batteries are organized into larger units called Corps, Columns, Avant-garde, Reserve, etc. In some armies, Corps and Columns are defined into Large Lines or Wings.

Important to note: The term "Corps" leader means not only the leader of a Corps but also the leader of equal sized units/formations: Column, Avant-garde, Reserve, etc.

There are four basic types of unit pieces (counters) that are used on the map during the game.

(2.4.1) Leader Counter

Generals and leaders are represented each with one counter, they have no reduced side and do not have any formation.

Generals in Chief are always represented with their portrayal on the front of the counter and with their Identification number (= ID#) "000" on the back.

Second General usually leads several "Corps" which represent a sub army inside the main army. As such, these leaders are also represented with their portrayal on the front of the counter but they do not have the ID# "000" on the back, which is exclusively for the Generals in Chief but an ID# "x00" instead.

Line/Wing leaders are represented with their coats of arms on the front of the counter. They generally have an ID# "xx0".

"Corps" leaders are represented with the coats of arms of their country on the front of the counter. They generally have an ID# "x00" or "x50".

(2.4.2) Infantry & Cavalry Brigade Counter

Brigades are simulated using one counter 1, 2 or 3 hexes long, front & back printed, showing a Brigade in Line or in Column (mobile) formations.

They have an ID# "xx0". These counters display the subordinate units with their ID#, all at full strength and with the same formation. On these counters, rectangles indicate the quantity of battalions or squadrons, making up the Brigade.

  • 1 hex, in Line
  • 1 hex, in Column
  • 2 hexes, in Line
  • 3 hexes, in Line
  • 3 hexes, in Column

(2.4.3) Infantry & Cavalry Square Counter

Battalions and squadrons, when they do not have the same formation as their Brigade, or when Disorganised or when Independent (not belonging to a Brigade), are simulated with two different square counters: one counter is for units still Well Formed and the other counter is for reduced strength units: when the unit is Shaken or Panicked.

Each of these counters has an ID# "xxx".

The Well Formed counter is front & back printed, showing the unit in Line or in Adapted formations. When not reduced, the two possible formations that infantry and cavalry can take at any given time are in Line or Adapted (= in Column of March, in Massed Column or in Loose Formation). On the side representing the unit in Line, rectangles indicate the quantity of battalions or squadrons. The Adapted side of a counter has an "A" in the top centre.

Design note: in the game, a unit in Column formation (= "A" Adapted side) will present the same frontage as a unit in Line formation, because of the space normally left to allow a fast and easy change of formation to Line, when needed.

The reduced strength counter is also front & back printed, showing the unit in Shaken or Panicked formations, exactly as the other infantry and cavalry units. The Shaken side of a counter has an "S" in the top centre and the Panicked side of a counter has a "P" printed on the top-left centre.

Some infantry and cavalry unit square counters have the same formation on the front and on the back. These counters are representing units not reduced but in a Dispersed Formation, used by special units (light troops for example) to harass enemy units.

These units have also a reduced strength counter, front & back printed, showing the unit in Shaken or Panicked formations, exactly as the other infantry and cavalry units.

(2.4.4) Artillery Counter

Each gun type of a battery is simulated with one square counter only, front & back printed, showing the unit unlimbered or limbered. Each of these counters has an ID# "xxx".

On the side representing the unit Unlimbered, on the top left, cannonballs show the number of guns represented by the unit, depending of the category of the gun: one shell for one heavy gun, each pair of 12 pdr guns, each four 6-8 pdr guns and each eight 4-6 pdr guns. For howitzers, cannonballs are replaced by bombshells.

If a small wheel is present on the top left of the "Limbered" side of the counter, it means the unit is "heavy artillery" (such as heavy guns, heavy howitzers and mortars). If there is no such small wheel, it means the unit is "light artillery" (such as light guns and light howitzers).

If unlimbered, the unit can be moved exactly as infantry in Line. If limbered, a heavy artillery unit has a special movement rate (see the column "Limbered Heavy Artillery" on the "Terrain Effects Table"), and a light artillery unit can be moved exactly as infantry in "A" formation.

(2.4.5) Baggage Counter

Army Baggage is simulated with one 2 hexes long counter front & back printed, showing the unit. These counters don't have any ID#. This unit has a special movement rate (see the column "Baggage" on the "Terrain Effects Table").

(2.4.6) Order Marker

This type of markers is used off the map.

There are four Orders markers: Manoeuvre "MAN.", Attack "ATT.", Defend "DEF.", Retreat "RET.".

These Orders markers are showing a coat of arms on their back, therefore hiding the order when in transit.

(2.4.7) Other Markers

These three types of markers are used on the map.

  • One marker Game Turn "T.00" and "T.30".
  • One marker Aflame "FLAM".
  • One marker Destroyed Bridge.

The "Game Turn" counter will be used on this Game Turn Record Track, the "T.00" side showing the 1st half hour turn and the "T.30" side showing the 2nd half hour turn.

2.5 The Order of Battle in the Playbook

It shows the army organized by "Corps" and, inside these "Corps", Brigade per Brigade.

Note that each "Corps" is colour coded and that all the ID# follow each other inside the same "Corps". For example, in Minden Allied 1st column ID# 100 is composed of three Brigades: ID# 110, 120 and 130 and Brigade ID# 110 has three units: ID# 111, 112 and 113, Brigade ID# 120 has four units: ID# 121, 122, 123 and 124 and Brigade ID# 130 has five units: ID# 131, 132, 133, 134 and 135.

All units on the Order of Battle have important values, under their name:

  • Four different values shown in seven square boxes = Effectiveness rating (Effectiveness means here quality and cohesion for "Combat" units and ability to command for "Command" units). Each value is for each status of the unit: "B" if the unit is still within its "B"rigade and in the same formation (Brigade counter used, unit's square counter still not used), "F" if the unit is Well "F"ormed within or not within its Brigade (unit's square counter used), "S" if the unit is "S"haken and, finally, "P" if the unit is "P"anicked.
  • One value on the right in a circle = Combat strength (strength means here multiples of around 100 men).

Important: For each value, higher is better.

For example: if unit ID# 111 "Royal Horse Guards" is still within its Brigade and has the same formation as the Brigade (no square counter used) the value is 5, if the unit square counter, still Well Formed, is on the map, the value is 4, if the unit is Shaken, the value is 3 and, finally, if the unit is Panicked, the value is 1.

Note that all Panicked units have a value of 1.

The Generals in Chief, Second Generals, Line/Wing leaders and "Corps" leaders do have only one value, on the right of their name, in a square, and showing their Effectiveness rating. As they cannot take part in combat actions, their Combat strength is always 0 and is not shown.

2.6 The Game Turn Record Track

This Turn Record Track is situated on the map, usually on a corner. It is composed of twelve circles surrounding a compass indicating the North. Each of the twelve circles shows a different hour of the day, AM and PM.

2.7 The Terrain Effects Table

The Terrain Effects Table provides details regarding the effects of terrain on movement (see example below). On the top line of the Table are indicated the movement points for each type of unit: these points are the maximum number of Movements Points the unit is able to expend within a turn. For example, a unit of infantry in Line is able to move 6 hexes on clear ground, a unit in "A" formation is able to move 12 hexes on the same Terrain.

The map shows distinct types of hexes characterized by different terrain features:

  • Clear hexes: a hex which contains no symbol.
  • Difficult ground: a hex which contains any heather, bush, vineyard or marsh symbol.
  • Soft cover hexes: a hex which contains any village or town symbol (they have a white dot on their centre).
  • Hard cover hexes: a hex which contains any fortification or redoubt symbol (they have a red dot on their centre).
  • Wood hexes: a hex which contains any wood or forest symbol.
  • Impassable hexes: a hex which contains any swamp, pond, lake or river symbol.
  • Minor and Major Roads: the Major roads have trees on either side, the Minor roads do not have trees.

There are three distinct types of hexsides characterized by different terrain symbols:

  • Soft cover hexsides representing fences, hedgerows or an abrupt slope.
  • Stream hexside representing streams or deep ditches.
  • Elevation hexside representing a moderate slope.

As such, these hexsides have no effect on movement, although they do have a cumulative impact on LOS (see G.2).

2.8 The Fire Combat Charts

There are several Fire Combat Charts, one per army, with different colours for the background. Each chart has two sides: the front side shows the two Relative Firepower Tables and the back side shows the Fire Combat Results Table.

(2.8.1) The Relative Firepower Tables

They are used to determine the column ("A" to "F") to use in the Fire Combat Results Table, depending of the kind of the firing unit (artillery or infantry) and the properties of the firing unit.

(2.8.1.1) For Firing Artillery

Each line has a specific colour, depending on the range the artillery unit is firing (Point blank, Medium and Maximum).

Howitzers (indicated with a red *) have special properties: they have a longer range and are the only guns able to fire on troops in the second line (behind other troops) and to set fire to buildings or wooden bridges (see details in G.3). Mortars are the only guns able to destroy buildings and fortifications.

Note that, for firing artillery, the number of firing guns are split in four quarters, depending of the type of gun and the frontage they took: when there is one shell on the counter of the firing artillery unit, look at the leftmost column, when there are two shells, look at the second leftmost column... and, in the same way, when there are four shells on the counter, look at the rightmost column... or, more easily, look at the column with the coinciding number of shells which is on the Table at the left of the number of corresponding guns.

(2.8.1.2) For Firing Infantry

The Combat strength and Effectiveness rating (see details in G.4) of each unit were added together and all results were then segmented into 5 fractions (for columns "A" to "E"). Some ID numbers are indicated, representing the relevant units and they correspond to the ID numbers on the counters: these units do not have the same firepower as the other ones.

Design Note: During the Seven Years War, the firepower of an infantry battalion, even a very effective and numerous one, was always less than the one of the same frontage of guns firing at Point blank. That is why, for Firing infantry, and for the determination of the column to use in the Fire Combat Results Table, column "F" will never be used.

(2.8.2) The Fire Combat Results Table

It is used to determine the results of the fire combat, depending on the type and situation of the target.

Note that the type of targets on the top of the table (targets "C" like Column) is the most vulnerable to fire combat, and, at the opposite, the type of targets on the bottom of the table (targets "H" like Hard cover) is the most protected target and, as such, the most difficult to hit.

2.9 The Charge Chart (see details in H.0)

This chart has two sides: the front side shows the Charge Opponents Ratio Table and the back side shows the Charge Results Table.

(2.9.1) The Charge Opponent Ratio Table

It is used to determine the ratio (5 ratios from 50% to 300%) to use in the Charge Results Table, depending on the defender and attacker strengths. To determine the ratio, start from "A" to finish at "C", keeping the same column from "A" to "B" and the same line from "B" to "C" (see the arrows).

(2.9.2) The Charge Results Table

It is used to determine the result of the charge, for the defender but also for the attacker, using the ratio determined by the previous table.

Standard Rules

3.0 Formations & Facing

All combat units have several formations available to them. A unit's facing is dependent upon its formation.

3.1 Infantry and Cavalry

(3.1.1) Units in Line Formation

(3.1.1.1) Definition & Historical Usage

Any infantry or cavalry Brigade counter, or Well Formed unit counter, facing a hex vertex is considered to be in Line Formation. The "Line" face (with a coloured rectangle on the top) of the counter must be shown.

The Line Formation simulates a line usually three ranks deep (four ranks for Austrian or Hanoverian infantry at the very beginning of the war or for Russians, two ranks sometimes for the Prussian infantry at the end of the war or for cavalry). This is a formation which is difficult to move but which is formed to get a maximum firepower.

(3.1.1.2) Methods & Restrictions

Units in Line Formation:

  • May not use Road Movement.
  • May change facing any number of hex vertices per activation, with a cost of one movement point per hex vertex (but two movement points for a 3-hex Brigade counter which is in fact wheeling).
  • Well Formed unit counters (not Brigade counters) must make a Task Check if they change facing more than one vertex per activation, one Check per additional vertex. Each failed Task Check costs one movement point, the unit can spend its remaining movement points normally.
  • May slide one time: may move sideways one hex only and only once per movement phase.
  • May use Reverse Movement (move one hex into either of its rear hexes) at the cost of its entire movement allowance.
  • May About Face (change its rear hexside to its front) at the cost of its entire movement allowance.

(3.1.2) Units in Adapted Formation

(3.1.2.1) Definition & Historical Usage

Any infantry or cavalry Brigade counter, or Well Formed unit counter, facing an hexside is considered to be in Column (Brigade counter) or in Adapted Formation (Well Formed unit counter). The "Column" face of the Brigade counter and the "Adapted" face of the Well Formed unit counter must be shown.

The Adapted Formation simulates:

  • A unit in Column of March if the counter is following a road (Road March). This is a formation which is easy to move on a road but which does not have good firepower.
  • A unit in Massed Column if the counter is on open ground. This is a formation which does not have a firepower as good as the Line.
  • A unit in Loose Formation if the unit is in a village or in a wood (and not following a road).

Important: Brigades are automatically disorganised in a village or in a wood and the Brigade counter must be replaced by the corresponding Well Formed unit counters when in a village or a wood. As the Column formation is available for the multiple counters, the Brigade counter can still be used in a village or in a wood but only if the Brigade follows a road.

Important: The Loose Formation is not allowed for the infantry or cavalry Brigade counters.

(3.1.2.2) Methods & Restrictions

Units in Adapted Formation:

  • May use Road Movement.
  • May change facing any number of hexsides per activation, with no penalty.
  • May not slide: may not move sideways.
  • May not use Reverse Movement (move into its rear hex).
  • May About Face (change its rear hexside to its front) at a cost of its entire movement allowance.

(3.1.3) Units in Dispersed Formation

(3.1.3.1) Definition & Historical Usage

Some infantry or cavalry Well Formed counter units are always considered to be in Dispersed formation. These units have two similar faces. These units cannot be in Line or in Adapted Formations.

The Dispersed Formation simulates a unit of infantry or cavalry covering as much ground as possible. This is a formation which has weaker firepower than units in Line but they are able to hold villages, forests, woods or any other soft cover without being disorganised. In open ground, they are in considerable difficulty when attacked in melee combat.

(3.1.3.2) Methods & Restrictions

Units in Dispersed formation:

  • May use Road Movement.
  • Have all-around facing. Changing facing is not an issue for units in Dispersed Formation.
  • They may move, fire or fight in any direction at any time at no cost.

(3.1.4) Shaken or Panicked Formations

(3.1.4.1) Definition & Historical Usage

Any infantry or cavalry units, when Shaken or Panicked, are no longer Well Formed. Shaken units are in considerable difficulty and disordered. Panicked units only want to leave the battlefield.

(3.1.4.2) Methods & Restrictions

Units in these formations:

  • May not use Road Movement.
  • Do not have any facing.
  • Can be oriented towards a vertex or a hex side.

3.2 Artillery

(3.2.1) In Unlimbered Formation

(3.2.1.1) Definition & Historical Usage

Any artillery counter unit, facing a hex vertex, is considered to be in Unlimbered Formation. The "Unlimbered" face of the counter must be shown.

The Unlimbered Formation is simulating a group of several guns, ready to fire. This is a formation which is difficult to move but which is formed to get maximum firepower.

Historical Note: during the Seven Years War, light guns, even if not limbered, were moved fairly easily thanks to the "Bricole" ("Avancier Riemen" in German). With this special process, no problem for light artillery (even light 12 pdr guns) to follow infantrymen marching in line or marching on the road.

(3.2.1.2) Methods & Restrictions for Light Guns

Light guns (artillery counters without a small wheel on the top left corner of the Limbered side) in Unlimbered Formation:

  • May not use Road Movement.
  • May change facing any number of hexsides per activation, with a cost of one movement point per hex vertex.
  • If changing facing more than one vertex per activation, must make a Task Check, one Check per additional vertex. Each failed Task Check costs one movement point, the unit can spend its remaining movement points normally.
  • May slide one time: may move sideways one hex only and only once per movement phase.
  • May use Reverse Movement (move one hex into either of its rear hexes) at the cost of its entire movement allowance.
  • May About Face (change its rear hexside to its front) at the cost of its entire movement allowance.
(3.2.1.3) Methods & Restrictions for Heavy Guns

Heavy guns (artillery counters with a small wheel on the top left corner of the Limbered side of the counter) in Unlimbered Formation:

  • May use Road Movement.
  • May change facing any number of hexsides per activation by paying the appropriate movement costs, with no penalty.
  • May not slide: may not move sideways.
  • May not use Reverse Movement (move its rear hex).
  • May not About Face (change its rear hexside to its front).

Note: Baggage, for movement, is considered as a Limbered Formation.

(3.2.2) In Limbered Formation

(3.2.2.1) Definition & Historical Usage

Any artillery counter unit, facing a hexside is considered to be in Limbered Formation. The "Limbered" face of the counter must be shown.

The Limbered Formation is simulating a group of several guns harnessed to horses. It is a formation which is easy to move on a road but which has no firepower.

Historical Note: during the Seven Years War, limbered artillery was manned by civilians who, as such, were not able to be in the enemy fire range. Artillery was therefore unlimbered as soon as close to the enemy fire range (about 1200 to 1500 meters from the enemy).

(3.2.2.2) Methods & Restrictions For All Guns

Units (light and heavy guns) in Limbered Formation:

  • May use Road Movement.
  • Have all-around facing. Changing facing is not an issue for them. They may move in any direction at any time at no cost.
  • May not fire or fight.

3.3 General in Chief, Second General, Line/Wing Leaders and "Corps" Leaders

(3.3.1) Definition & Historical Usage

Any General and Leader simple counters simulate not only the individuals but also the attached headquarter staff.

(3.3.2) Methods & Restrictions for Leaders

These counters:

  • May not use Road Movement.
  • If not moving, may change facing only one vertex per activation at a cost of its entire movement allowance.
  • If moving, may change facing any number of hexsides per activation, with a cost of one movement point per hex vertex but must make a Task Check, one Check per change of facing. Each failed Task Check costs one movement point, the unit can spend its remaining movement points normally.
  • May slide: may move sideways one hex only, at a cost of its entire movement allowance.
  • May use Reverse Movement (move one hex into either of its rear hexes) at a cost of its entire movement allowance.
  • May About Face (change its rear hexside to its front) at a cost of its entire movement allowance.

4.0 Zone of Influence (= "ZOI")

A combat unit may or may not exercise a ZOI: it depends on its formation. "Shaken" and "Panicked" units do not exert any ZOI.

ZOI can be constrained by Line of sight (see details in G.2).

4.1 For an Infantry Unit

Its ZOI corresponds to the zone in which it can fire, i.e.:

  • the two hexes in front of the hex it occupies when in Line.
  • the hex in front of the hex it occupies when in Column (Adapted on a road or in open ground).
  • the six hexes around the hex it occupies when it is in Loose (Adapted in a village or in a wood) or Dispersed Formation.

4.2 For a Cavalry Unit

Its ZOI corresponds to the zone in which it can move, i.e.:

  • the two frontal hexes in front of the one it occupies when in Line and all the hexes that the unit can reach, without exceeding its movement points, and if in the Line of sight (see details in G.2).

Important: Cavalry units in Adapted (Column) or Dispersed formations do not have any ZOI. These units cannot charge.

4.3 For an Artillery Unit

For Unlimbered artillery units, the ZOI is the Point Blank Fire Zone which is the zone extending from the two frontal hexes in front of the hex it occupies to all hexes at point-blank fire range: 1 to 4 hexes, depending on the category of the gun, and if the Line of sight is not blocked (see the Fire procedure, rules G.2 and G.3).

Important: Limbered artillery units do not have any ZOI.

4.4 Effects

Any units that have an Enemy unit in their ZOI are not obliged to fire or charge.

Cavalry units that have an Enemy unit in their ZOI can make a Reaction-charge, but this Reaction-charge can be done only if the targeted Enemy unit is in the Line of sight of the cavalry unit.

During a same movement, a unit entering an Enemy ZOI does not have to stop upon entry BUT it is obliged to stop when it enters a frontal hexagon of an enemy unit.

During a same movement, a unit can exit an enemy ZOI and enter another enemy ZOI.

An Enemy ZOI is not negated by a hex containing a friendly unit.

Important: Artillery units cannot change formation when they are within an enemy ZOI (see E.1.9: Transition from one formation to another).

Design Note: As limbered artillery units are destroyed as soon as they are fired upon (see the Fire Combat Results Table), it is important to not let them enter an Enemy ZOI.

5.0 Stacking (placement of several units in a same hex)

The following limits apply to the placement (i.e., "stacking") of several units in the same hex.

5.1 For Infantry

The stacking limit is up to two battalions (two infantry unit square counters). These two battalions can be on a Brigade counter or not.

If they are on a Brigade counter, they must be from this brigade and they must strictly be stacked on the part of the Brigade counter concerning them. A battalion cannot be stacked on a Brigade counter if it isn't from this Brigade counter.

If two battalions are stacked but are not on a Brigade counter, they can come from different brigades.

5.2 For Cavalry

The stacking limit is up to five squadrons (rectangles shown on the top of the cavalry unit square counters). These five squadrons can be on a Brigade counter or not.

If they are on a Brigade counter, they must be from this brigade and they must strictly be stacked on the part of the Brigade counter concerning them. Any squadron cannot be stacked on a Brigade counter if it isn't from this Brigade counter.

If up to five squadrons are stacked but are not on a Brigade counter, they can come from different brigades.

5.3 For Artillery

A hex can contain several artillery unit square counters but the total quantity of cannonballs shown on the top left of the counters cannot exceed eight.

Or a hex can contain one infantry unit square counter (one battalion) + one or more artillery unit square counters but the total quantity of cannonballs shown on the top left of the counters cannot exceed four.

5.4 Limitations

Stacking limitations apply at all times, even during all parts of the movement.

At any time, infantry and cavalry units cannot stack together, nor can artillery and cavalry units. Artillery units cannot stack with an infantry Brigade counter.

Neither Generals in Chief and Second General nor Line/Wing and "Corps" leaders count against stacking limitation.

Units can never "overstack", at any moment.

Units from opposite sides may never stack in the same hex. Units that violate stacking requirements must be moved into the nearest open hex by the opposing (i.e., non-owning) player.

5.5 Alignment

Units stacked together may face in different directions.

Design Note: When several square counters are stacked, the unit on top is always considered to be on the right side of the hex (if the units are in Line or Unlimbered formations) or ahead (if the units are in Column, Adapted or Limbered formations); the unit on the bottom is thus considered to be on the left side of the hex (if in Line or Unlimbered formation) or at the rear (if in Column, Adapted or Limbered formations). If a unit square counter in Column, Adapted or Limbered is stacked with a unit square counter in Line or Unlimbered, the owner of the two counters has the choice: if the counter in Column, Adapted or Limbered is on top, the unit can be considered either ahead or on the right side of the other unit, if the counter is on the bottom, the unit can be considered either at the rear or on the left side of the other unit.

6.0 Effectiveness Check (= "EC") and Task Check

6.1 In General

EC and Task Check are generic but very important tools used in this game for a variety of purposes. EC leads to disorganisation, recoil or panic if failed. Task Check, if failed, leads to the impossibility to do a task but doesn't lead to a disorganisation.

These checks are always performed per unit, never per brigade.

To help both players, all Strengths and Effectiveness ratings of all their units are compiled into a "Units Data Sheet", one for each opponent.

[Example "Units Data" sheet for the French in Minden omitted: image.]

6.2 Conduct EC or Task Check

To conduct an EC or a Task Check, the Enemy player rolls the die and the player owning the unit checks the result of the die roll against the unit's current Effectiveness rating (available onto the Order of battle but also onto the "Units Data Sheet").

(6.2.1) Pass

If the result of the die roll is less than the unit's current Effectiveness rating, the unit passes the check and is not affected.

A unit with an Effectiveness rating of 7 will always pass the check: the only way to disorganise it is to charge or fire on it and to try to get a D or P result.

(6.2.2) Fail

If the result of the die roll is higher than or equal to the unit's current Effectiveness rating, the unit fails and:

  • suffers a Disorganisation for an EC
  • cannot do the task for a Task Check.

6.3 Effects of a Disorganisation

Important to note: If a General in Chief, Second General, Line/Wing leader or "Corps" leader is in the same hex (i.e., stacked) with the unit conducting the EC, you can use the Effectiveness rating of the General in Chief, Second General, Line/Wing leader or "Corps" leader.

(6.3.1) Unit in a Brigade

A unit in a Brigade (unit's square counter still not used), that fails an EC is Disorganised: the unit's square counter must be put on the Brigade counter, either on its Line side or on its Adapted side.

Important to note: When more than half of the units making up a Brigade are Disorganised, the multi-hex counter must be removed from the map and exchanged by the relevant units square counters.

(6.3.2) Well Formed Unit

A Well Formed unit (unit's square counter used) that fails an EC becomes Shaken: the Shaken/Panicked counter must replace the Well Formed unit counter and be shown on its Shaken side.

(6.3.3) Shaken Unit

A Shaken unit that fails an EC becomes Panicked: the Shaken/Panicked counter must be flipped on its Panicked side.

(6.3.4) Unit with Effectiveness Rating of 1

A unit with an Effectiveness rating of 1 (all Panicked units) will always fail the EC: when a Panicked unit has to make an EC, no check is made and, instead, the unit fails automatically and must recoil 3 hexes in the opposite direction to the nearest enemy unit.

7.0 Bad Weather & Night

If weather and night conditions combine, the most unfavourable effects must be taken into consideration.

7.1 Fog

If fog occurred during a battle, the relevant turns and hexes will be indicated in the scenario. Fog limits visibility and unit's movement: no unit can see or shoot further than a certain distance. There are two types of fog turns: Light Fog and Heavy Fog.

(7.1.1) Light Fog Effects
  • Maximum Fire Combat range for artillery units is 3 hexes.
  • Cavalry Reaction-Charges can be made only against targets the attacker can see before the action begins (at 3 hexes).
  • Any unit, in any formation and in any allowed terrain, that expends more than half of its movement points must make an EC at the end of its movement.
  • Units performing Road March have only 1 Hex bonus and only on Major roads.
(7.1.2) Heavy Fog Effects
  • Maximum Fire Combat range for all units is 1 hex.
  • Cavalry Reaction-Charges can be made only against targets the attacker can see before the action begins (at 1 hex).
  • No unit, in any formation and in any allowed terrain, may expend more than half of its movement points.
  • Any unit in column that moves outside a road (Major or Minor) must make an EC at the end of its movement.
  • Units performing Road March do not have any movement point bonus.
  • Units in column moving on a road (Major or Minor) in Heavy Fog turns may take a Wrong Direction: when approaching an intersection, evenly allocate the options, roll a die and move the units their full movement in the specified direction.
  • A unit on a road taking a Wrong Direction stops movement when it reaches an Enemy ZOI or a friendly unit.
  • Reinforcements, even if in column or in "A" formation, are not subject to Wrong Direction during their initial activation entering the map on a road.
  • Leaders stacked with units taking Wrong Direction must remain with the units for the duration of the movement.

7.2 Heavy Rain

If a Heavy Rain occurred during a battle, the relevant turns will be indicated in the scenario. Heavy Rain limits visibility, unit's movement and impedes fire combat.

(7.2.1) Heavy Rain Effects
  • Any Fire Combat is impossible.
  • Cavalry Reaction-Charges can be made only against targets the attacker can see before the action begins (at 3 hexes).
  • Any unit, in any formation and in any allowed terrain, that expends more than half of its movement points must make an EC at the end of its movement.
  • Units performing Road March do not have any movement point bonus.
  • Units in column moving on a road (Major or Minor) in Heavy Rain turns may take a Wrong Direction: when approaching an intersection, evenly allocate the options, roll a die and move the units their full movement in the specified direction.
  • A unit on a road taking a Wrong Direction stops movement when it reaches an Enemy ZOI or a friendly unit.
  • Reinforcements, even if in column or in "A" formation, are not subject to Wrong Direction during their initial activation entering the map on a road.
  • Leaders stacked with units taking Wrong Direction must remain with the units for the duration of the movement.

7.3 Heavy Snow

If a Heavy Snow occurred during a battle, the relevant turns will be indicated in the scenario. Heavy Snow limits visibility and unit's movement: no unit can see or shoot further than 3 hexes.

(7.3.1) Heavy Snow Effects
  • Maximum Fire Combat range for artillery units is 3 hexes.
  • Cavalry Reaction-Charges can be made only against targets the attacker can see before the action begins (at 3 hexes).
  • Any unit, in any formation and in any allowed terrain, that expends more than half of its movement points must make an EC at the end of its movement.
  • Units performing Road March do not have any movement point bonus.
  • Units in column or in "A" formation moving on a road (Major or Minor) in Heavy Snow turns may take a Wrong Direction: when approaching an intersection, evenly allocate the options, roll a die and move the units their full movement in the specified direction.
  • A unit on a road taking a Wrong Direction stops movement when it reaches an Enemy ZOI or a friendly unit.
  • Reinforcements, even if in column or in "A" formation, are not subject to Wrong Direction during their initial activation entering the map on a road.
  • Leaders stacked with units taking Wrong Direction must remain with the units for the duration of the movement.

7.4 Night

If Night occurred during a battle, the concerned turns will be indicated in the scenario. Night limits visibility and unit's movement. No unit can see or shoot further than a certain distance, depending of the kind of night. There are two types of Night turns: Light Night (nightfall or dawn) and Dark Night.

(7.4.1) Light Night Effects
  • Maximum Fire Combat range for artillery units is 3 hexes.
  • Cavalry Reaction-Charges can be made only against targets the attacker can see before the action begins (at 3 hexes).
(7.4.2) Dark Night Effects
  • Maximum Fire Combat range for all units is 1 hex.
  • Cavalry Reaction-Charges can be made only against targets the attacker can see before the action begins (at 1 hex).
  • Any unit, in any formation and in any allowed terrain, that expends more than half of its movement points must make an EC at the end of its movement.
  • Units performing Road March have only 1 Hex bonus and only on Major roads.
  • Units in column or in "A" formation moving on a road (Major or Minor) in Dark Night turns may take a Wrong Direction: when approaching an intersection, evenly allocate the options, roll a die and move the units their full movement in the specified direction.
  • A unit on a road taking a Wrong Direction stops movement when it reaches an Enemy ZOI or a friendly unit.
  • Reinforcements, even if in column or in "A" formation, are not subject to Wrong Direction during their initial activation entering the map on a road.
  • Leaders stacked with units taking Wrong Direction must remain with the units for the duration of the movement.

Detailed Sequence of Play

Prologue: this Detailed Sequence of Play is designed to allow both players to begin playing by simply following the course of the game phases, with a maximum of details and explanations for each phase. This way, similar rules could be repeated in several game phases.

A.0 Set-Up and Arrival of Troops

A.1 Set-Up of Armies

Before play can start, the map and Orders/Organisation Sheets (see 2.3) must be set up on the table.

[Example of layout on a rectangular table for the full scenario of the battle of Minden: image.]

The counters must be set up on the map according to the chosen scenario instructions. For each scenario, a picture is showing the starting positions of troops. Each player has to deploy his forces, following this picture.

Do not forget to put the "Game Turn" marker (see 2.4.7) on the Game Turn Record Track (see 2.6) at the hour indicated on the scenario instructions.

For all the units concerned by the scenario played, each player places on the Orders/Organisation Sheets (on each relevant silhouette) the counters not placed on the map.

One of the four available Orders markers (see 2.4.6) is also placed on the appropriate place, on or near each leader (see 2.3 and C.1.2), on the Orders/Organisation Sheets. This placement is according to the instructions of the chosen scenario: at player's choice or as written in the scenario.

A.2 Arrival of Units (1st half hour turns only)

(A.2.1) Approach March Table

In some scenarios, the arrival of the units is fully defined: the Approach March Table is not filled in (i.e. "none" is written) and the player must strictly follow the scenario.

But, sometimes, an Approach March Table is provided giving the earliest possible time that Line/Wings or "Corps" may be scheduled to arrive at given entry points.

And, other times, no Approach March Table is provided: one of the players (or both) should decide on his strategy and has to create his own Approach March Table for the arrivals of any or all of his units at entry points on the map.

Player should indicate which Line/Wing or "Column" will enter where and when in writing its strategy on a paper sheet.

On each map, there are entry points on the sides of the board (always indicated by a rectangle with a direction name). For example, in this excerpt from the Battle of Minden map, Porta Westfalica is a possible entry point and the first move of incoming units could be to any of the 3 hexes touching the rectangle.

(A.2.2) Random Arrival Times

When the arrival of units is not fully defined (i.e. when there are entry points), players must roll to see through which entry points and at exactly what time their units will arrive.

Please note that players who prefer to strictly follow historicity can ignore these dice rolls and proceed directly to the designated entry points.

One hour before the projected arrival time of each Line/Wing or "Corps", player rolls the die to determine the actual arrival time of the units:

  • On a roll of 6, it arrives one hour ahead of schedule.
  • On a roll of 5, 4 or 3, it arrives on time.
  • On a roll of 2, it arrives one hour late.
  • On a roll of 1, it arrives two hours late.

Note that, during the first turn, on a result of 6, the units will be able to carry out two movements upon their arrival (they arrive one hour earlier).

Then, when a Line/Wing or "Corps" arrives, a die is rolled to determine where it arrives:

  • On a roll of 6, 5, 4 or 3, it arrives at the projected entry point.
  • On a roll of 2, it arrives one entry point to the right of its projected entry point, in the direction of the march.
  • On a roll of 1, it arrives one entry point to the left of its projected entry point, in the direction of the march.

If there are no possible given entry points to the left or to the right of the projected entry point, the Line/Wing or "Corps" arrives at the projected entry point, in the direction of the march.

B.0 Initiative

B.1

Look at who is the First Player. He is announced in the chosen scenario instructions. Generally, the historical attacker is the first player.

B.2

At the Beginning of each Turn, the First Player decides if he keeps the Initiative or not. If he keeps the initiative, he'll be the beginner for all alternative phases of this turn and he can go to C.1. Then, second player will go to C.2.

B.3

If the First Player gives up the Initiative, the Second Player will be the Beginner. It will be him who will go to C.1 and will begin all alternative phases of this turn, then first player will go to C.2.

Alternative Phases for the Two Players

C.0 Phase of the Generals in Chief

C.1 For the General in Chief of the Player who has the Initiative for this Turn

(C.1.1) Movement of the General in Chief
(C.1.1.1) In General

The beginning player, who has the initiative, moves his General in Chief first.

The General in Chief always has the number 000 on its rear. Once this leader is moved, the player flips the counter over to show the leader's portrait.

[Example counter for a French General in Chief in Minden: image.]

The movement allowance of the Generals in Chief is indicated at the top of the "Terrain Effects Table" depending of the army, in the line "Movement Points" and in the column "Leaders". For example, for the battle of Minden and for all the Allied leaders, the movement allowance is 24.

The shown number represents the maximum number of movement points the selected General in Chief may expend in a single phase.

As the General in Chief's counters have all around facing, they may move in any direction at any time. Change facing during movement does not cost any movement point (see on the "Terrain Effects Table" the second line called "Change facing during Movement").

General in Chief may use the Road March (see on the "Terrain Effects Table" the fifth line called "Road March").

(C.1.1.2) Purpose

A General in Chief can be moved for multiple purposes:

  • To rally or reorganise (see J.0 and L.0)
  • To give an order specifically to a unit (see C.1.2)
  • To be well placed for the organisation of his army
  • To prevent a unit to be Out of Command (see E.1.5)
(C.1.1.3) Movement Procedure

General in Chief is moved individually in any direction or combination of directions.

General in Chief spends movement points to move from hex to adjacent hex. The number of movement points spent to enter a hex depends on the type of terrain in the hex or along its hex sides (see the "Leaders" column in the "Terrain Effects Table", depending of the terrain type).

A General in Chief may continue to move until his movement allowance is expended, or until the player decides to stop moving him. The General in Chief may not be moved again in that Phase.

Unused movement points may not be accumulated from turn to turn or transferred to another unit.

The "Terrain Effects Table" lists the number of movement points a General in Chief (= a leader) must expend to enter a hex or cross a type of hexside. A General in Chief may not enter a hex if it has insufficient movement points to enter or cross that terrain type.

The cost to cross terrain hexsides is added to the cost to enter a hex.

(C.1.1.4) Road March Bonuses

The number of hexes a General in Chief may expend may be increased if he is using Road March: +1 hex if on a Minor road, +3 hexes if on a Major road (see on the "Terrain Effects Table" the fifth line).

A leader using Road March to enter a hex pays the cost of the road (one movement point), not the cost of the other terrain in the hex.

To use Road March, the leader must begin and finish its movement on the road. To get the +3 hexes increase, the leader must make ALL his movement on a Major road.

Reminder: Major roads are those with trees on either side.

Roads passing through bridges or villages (and towns) are not interrupted and therefore the hexes of bridge and village (or town) count in the calculation of the expenditure of movement points for the Road March. Every village (or town) hex is considered to be connected to adjacent village (or town) hexes, even if a road is not drawn. The fords and the destroyed bridges interrupt the roads.

(C.1.1.5) Summary of Movement Allowances

In Minden 1759, leaders from the two sides have the same movement abilities = 24 movement points.

For both Generals in Chief, to change facing during movement does not cost any movement points.

Any clear hex costs one movement point, as do road, wood, forest, soft cover (white points), hard cover (red points), marsh, heather and bushes hexes.

Slope, fence, hedge, ditch and stream hexsides cost one movement point.

Elevation hexside does not cost any movement points.

Bridge does not cost any movement points either.

Only the river and swamp hexes are prohibited for Generals in Chief.

Thus, the Generals in Chief are very free to move and have maximum movement capacities: they can advance 24 hexes freely, or even 25 or 27 hexes if they make a Road March.

(C.1.2) Issue New Orders (each 1st half hour turn only)
(C.1.2.1) In General

The General in Chief may issue new orders to the Line/Wing leaders or to the "Corps" leaders.

New orders are issued only during the Orders Phase of each 1st half hour turn ("T.00" turn).

(C.1.2.2) Organisational Scope of Orders

When a new order is issued to a Line/Wing leader, the same order must be given to at least two of the "Corps" composing this Line/Wing and one of the three other orders, at the choice of the player, could be given to the remaining "Corps", if any, composing the Line/Wing.

When a new order is issued to a "Corps" leader, it must be given to ALL the units composing the "Corps".

(C.1.2.3) Order Placement

Basically, this is accomplished by placing one of the four Orders Markers (e.g. MANEUVER, ATTACK, DEFEND, RETREAT) on the "Orders/Organisation Sheet" besides the applicable leader, in the Line/Wing or "Corps" leader box or in one of the two "Orders in Transit" boxes.

Important to note: if orders are already placed in the Transit boxes of a leader, the player must advance them BEFORE issuing a new order. Thus, phase C.1.3 Advance Existing Orders must be carried out before phase C.1.2 Issue New Orders.

The exact placement of a particular order on the Sheet will depend on the distance between the General in Chief and the leader. Orders are move up one level each 1st half hour turn until they eventually move into the Line/Wing or "Corps" leader box. Given the mechanics of the orders process, an order can take up to four half hour turns to reach the leader.

(C.1.2.4) New Orders

New orders replace any existing orders in the Line/Wing or "Corps" leader box and in the "Orders in Transit" boxes.

Once in place in the Line/Wing or "Corps" leader box, an order remains until it is either superseded by a new order or is eliminated through an Ignore an Order Task Check (see E.16).

If a new order is put directly in the leader box, it replaces the existing order but the other orders into the "Orders in Transit" boxes are left in place and retained.

(C.1.2.5) The Orders

The brevity of the available orders could create some questions during play and some degree of discretion has to be exercised in carrying them out.

  • MANEUVER: The leader must move at least one of his units at least one hex, depending of the abilities of his troops (see the Terrain Effects Table). The leader does not have to move his units in a straight line and the move can be in any direction. The units may not charge and thus cannot move to be adjacent to an enemy unit.

Units already adjacent to an enemy unit at the beginning of their turn may either stay adjacent to the enemy unit without moving and attacking or move backwards (the MANEUVER order is not removed from the "Orders/Organisation Sheet").

  • ATTACK: No unit can complete any movement that would end it away from the enemy. If there are enemy units within movement range among the leader's units, this leader must use at least one of his units to fire or charge enemy units regardless of the odds: if this means that only one unit can fire or charge a heavily defended ridge, so be it – the player must attack, even if it is piecemeal. If several enemy units are within range, the player may choose which units to attack. The leader is not obliged to move his units in a straight line and the movement can be done in any direction, but, at the end of their movement, the attacking units must be able to fire or charge. If there is no enemy unit within movement range among the leader's units, this leader must move at least one of his units by at least one hex towards the enemy.
  • DEFEND: Units must take defensive positions and may not move more than one hex. This move can be in any direction. Units may not move into enemy ZOI. However, a unit already in an enemy ZOI at the beginning of his turn may remain in the hex or withdraw one hex. This is the only order that allows the player not to move any units.
  • RETREAT: All units must finish their move at least 1 hex towards the friendly edge of the map. Units in Line formation, when adjacent to enemy units, may make, before their movement and for free, a Reverse Movement + About Face: they can thus move one hex into either of their rear hexes AND change their rear hexside. Units may not enter any enemy ZOI. If a unit is already in an enemy ZOI, it may move out of the ZOI but do not have to.
(C.1.2.6) New Order Placement Procedure

The following rules govern the placement of new orders on the "Orders/Organisation Sheet" when new orders are issued by the General in Chief (or the Second General):

  • General in Chief (or Second General) is in the same hex or one hex away from the Line/Wing or "Corps" leader: the new Orders Marker should be put directly in the leader square box and replaces any existing order. In this case, there is no delay: the Line/Wing or "Corps" leader received the new order immediately.
  • General in Chief (or Second General) is more than one hex but less than or equal to six hexes away from the Line/Wing or "Corps" leader: the new Orders Marker is placed in the "-1 Orders in Transit" box and replaces any existing order. This means the order will take two half hour turns to reach the leader.
  • General in Chief (or Second General) is more than 6 hexes away but the Line/Wing or "Corps" leader is not Out of Command (see E.1.5): the new Orders Marker is placed in the "-2 Orders in Transit" box and replaces any existing order. Such order will take four half hour turns to arrive.

As written in E.1.5, a Line/Wing or "Corps" becomes Out of Command when its leader is more than ten hexes away from his General in Chief (and eight hexes away from his Second General) and, if so, the Line/Wing or "Corps" cannot have any order: any current order is removed from the leader. The leader cannot receive orders until he becomes In Command in subsequent turns.

Remember that orders markers are all showing a same coat of arms on their back, allowing players to hide the orders in transit to the other player, until they reach the order received box (i.e. leader square box).

(C.1.2.7) Delivery Lag Time

Important to note: The lag time (up to four half hour turns) for the delivery of orders reflects the delay caused by transporting a written or verbal order from the General in Chief (or by the Second General) to the receiving leader by way of courier (usually through headquarters).

The delay for delivery of orders necessitates some planning on the part of the player. Orders that are appropriate for the current turn may be utterly disastrous when adhered to in the next turn.

Example: on the Allied "Orders/Organisation Sheet", the General in Chief Ferdinand of Brunswick had previously given a "Manoeuver" order to the 4th Column of Major-General von Scheele. A "MAN." marker is therefore visible on the von Scheele space. Ferdinand of Brunswick has now decided to give a "Defend" order to this "Corps". Von Scheele's counter is more than six hexes and less than eleven hexes from Ferdinand's counter: A "DEF." marker is put on the "-2" space in the Orders in Transit and this marker is shown on its back (we see the coat or arms).

(C.1.3) Advance Existing Orders (each 1st half hour turn only)

This phase reflects the movement of orders as they are carried by messengers from a General in Chief (or Second General) to a Line/Wing or "Corps" leader.

Each player must move the Orders markers currently in the "Orders in Transit" boxes down one level on the "Orders/Organisation Sheets".

Note that a new order that has just been issued this turn cannot be advanced.

If we take back the previous example, the "DEF." marker will be advanced during the following 1st half hour turn in the "-1" space, still shown on its back. Then, during the next 1st half hour turn, the marker will be put on the von Scheele space, this time on the "DEF." side of the marker. The new "Defend" order will replace the "MAN." order (which will be removed from the Allied "Orders/Organisation Sheet") and the "DEF." side of the marker will be shown. The full process will thus take two hours:

As new orders are issued by the General in Chief (or the Second General) every 1st half hour turn, two or even three orders can be shown on the "Orders in Transit" boxes (one each per box) at the same time.

C.2 For the General in Chief of the Player who does not have the Initiative for this Turn

See C.1 (and then C.1.1 to C.1.3) and follow the same procedure than the player who previously had the initiative.

D.0 Phase of the Second Generals

If there is no Second General in the scenario, this phase must be skipped and players go to next phase (see E.0).

During the Seven Years War, in some battles, a Second General was present, responsible for a part of the army. Second General is always represented by a leader's counter with his portrayal on the front, like the General in Chief. Ziethen in Torgau is a good example.

Important to note: Second General is an independent commander who does not have to trace a line of command to the General in Chief: he is never Out of Command since he himself is source of command.

But, the player has to check if Line/Wing and "Corps" leaders, but also the Brigades and Units of this leader are Out of Command (see E.1.5 for details).

All Second Generals have a range of Command of eight hexes, as the crow flies (the path must be free of enemy units). All Line/Wing leaders and "Corps" leaders inside this range of eight hexes are not Out of Command. All Brigades and Units inside this range of eight hexes are also not Out of Command.

D.1 For the Second General of the Player who has the Initiative for this Turn

(D.1.1) Movement of the Second General
(D.1.1.1) In General

The beginning player, who has the initiative, moves his Second General.

Once this leader is moved, the player flips the counter over to show the leader's portrait.

[Example counter for the Allied Second General in Minden: image.]

The movement allowance of the leaders is indicated at the top of the "Terrain Effects Table" depending of the army, in the line "Movement Points" and in the column "Leaders". For example, for the battle of Minden and for all the French leaders, the movement allowance is 24.

The shown number represents the maximum number of movement points the selected Second General may expend in a single phase.

As the Second General leader's counters have all around facing, they may move in any direction at any time. Change facing during movement does not cost any movement point (see on the "Terrain Effects Table" the second line called "Change facing during Movement").

Leaders may use the Road March (see on the "Terrain Effects Table" the fifth line called "Road March").

(D.1.1.2) Purpose

Exactly like the General in Chief, the Second General can be moved for multiple purposes:

  • To rally or reorganise (see J.0 and L.0)
  • To give an order specifically to a unit (see C.1.2)
  • To be well placed for the organisation of his army
  • To prevent a unit to be out of command (see E.1.5)
(D.1.1.3) Movement Procedure

Like the General in Chief, the Second General is moved individually in any direction or combination of directions. The Second General can be moved exactly like the General in Chief (see C.1.1).

(D.1.2) Issue New Orders (each 1st half hour turn only)

Exactly like the General in Chief, the Second General may issue new orders to the Line/Wing leaders or to the "Corps" leaders under him.

New orders are issued only during the Orders Phase of each 1st half hour turn (see C.1.2 for the procedure).

Important to note: if orders are already placed in the Transit boxes of a leader, the player must advance them BEFORE issuing a new order. Thus, in this case, phase C.1.3 Advance Existing Orders must be carried out before phase C.1.2 Issue New Orders.

(D.1.3) Advance Existing Orders (each 1st half hour turn only)

This phase reflects the movement of orders as they are carried from the player's Second General to the player's Line/Wing or "Corps" leader under the orders of the Second General (see C.1.3 for the procedure).

Each Player must move an Orders marker currently in one of the "Orders in Transit" boxes down one level on the "Orders/Organisation Sheet".

Note: A new order that has just been issued this turn cannot be advanced.

D.2 For the Second General of the Player who does not have the Initiative for this Turn

See D.1 (and then D.1.1 to D.1.3) and follow the same procedure as the player who has the initiative this turn.

Line/Wing and Corps Phase

E.0 Phase of a Line/Wing Leader, if any, or a "Corps" Leader

One leader alternatively

Some armies do not have Line/Wing leaders but have only "Corps" leaders.

A Line/Wing was composed of several "Corps".

[Example counter for a French "Corps" leader in Minden: image.]

E.1 For one Line/Wing or "Corps" Leader of the Player who has the Initiative for this Turn

(E.1.1) Selection of a Line/Wing or "Corps" Leader

Both players select and activate their leaders alternatively, starting with the player holding the initiative.

If there are Line/Wing leaders in an army, the player has the choice to select a Line/Wing leader or a "Corps" leader. The counter of a not yet selected leader must show the side of the counter with a number (not the name of the leader). To show that a leader has been selected, the player has to flip the leader's counter and show the side with the leader's name.

Although it is mandatory for a player to select a Line/Wing or a "Corps" when it's his turn, it's possible for the player to do nothing with that Line/Wing or "Corps" and just flip the leader's counter into showing the leader's name.

If the player selects a Line/Wing leader, at least one "Corps" from this Line/Wing leader must be selected at the same time. Currently unselected "Corps" will need to be individually selected later.

If, at the end of the possible selections of one player, it rests to the other player several leaders still to select, this player must successively select all these remaining leaders, one by one.

(E.1.2) Selection of a Large Line of Brigades from Several "Corps"
(E.1.2.1) In General

The only way to move several "Corps" at the same time is to form a Large Line.

A Large Line could be selected by the relevant Line leader (if any) but, if there is no Line leader in the scenario, a Large Line could also be selected by the General in Chief or the Second General.

Only Large Lines composed of either cavalry units or infantry + unlimbered artillery units can be selected as a Large Line. No Large Line can be composed of cavalry + another type of unit.

(E.1.2.2) Requirements

Every turn, to form a Large Line, several "Corps" must:

  • Not be Out of Command (see E.1.5).
  • Have the same Order.
  • Have one or more Brigades juxtaposed side by side (it's different for the Prussian army – see below), in Line formation and with the same facing.
  • Have no limbered units (artillery units) or in "A" formation (infantry or cavalry units) linking the concerned "Corps".
(E.1.2.3) Formation Details

A Large Line must consist of units from at least two "Corps". A Large Line must be formed of at least two Brigades which must come from at least two "Corps": a Large Line has to be formed of one Brigade (or more) in Line formation from one "Corps" and one Brigade (or more) in Line formation from another "Corps".

A Large Line could be formed by several Brigades coming from several "Corps".

If units in "A" formation or limbered make the link between the concerned "Corps", they cannot be included in the Large Line and so break this Large Line.

All the "Corps" leaders who are concerned by the units forming the Large Line must be activated at the same time. All units of these "Corps", even those not forming the Large Line, must be activated, one "Corps" after another.

Once activated the player has to flip the Line/Wing leader (if any) and "Corps" leaders counters and show, for each concerned counter, the side with the name of the leader.

(E.1.2.4) Extended Example of Large Line

Example from a situation during the battle of Minden:

On the left (Allied side), the Brigades '710 Einsiedel', the artillery units '601' and '701' and the Brigade '610 Toll' are forming a Large Line: all infantry units are well in Line formation and the artillery units are well unlimbered. The Brigade '810 Holstein' cannot be integrated in this Large Line because this Brigade is cavalry and, not infantry.

As Ferdinand is just near, the two concerned "Corps" leaders ('Imhoff' and 'Wutginau') are not Out of command. If these two leaders have the same Order, they can be selected together, at the same time. ALL units of the concerned leaders must be selected even if they are not included into the Large Line. When all the units have been selected, the two concerned Leader counters are flipped to show their name (as shown on the example) in order to show that the two corps have been selected during this turn.

It can be noted here that, even if the artillery units '601' and '701' would have been limbered, 'Imhoff' and 'Wutginau' could have been selected together because the Brigades '720 Behr' and '620 Bischausen' form a Large Line and, thus, the two leaders concerned can be selected together.

Taking the French (right) side of this example, note that the two infantry Brigades '130 Touraine' and '140 Rouergue' cannot form a Large Line with the Brigade '210 Colonel General' because this Brigade is cavalry and not infantry. Also, note that the two artillery units '103' and '104', even if they are well unlimbered and have the same orientation than the infantry Brigades, could not be integrated to a Large Line because they are not juxtaposed side by side (by the flank) with the infantry Brigades. Finally, note that the two infantry units '131' and '144' would break a Large Line because they are in adapted "A" formation and not in Line.

Thus, the two infantry Brigades and the two cavalry Brigades cannot be selected at the same time. The French player will have to choose which Brigades he wants to select first: infantry or cavalry?

(E.1.2.5) Large Line for Prussian Army

To be selected at the same time, Prussian units need, like units from other nations, to be juxtaposed side by side, to be in Line formation and with their identical facing, but Prussian units (and only these ones) also can be juxtaposed front to back, still in Line formation and with their facing identical.

(E.1.2.6) Extended Example of Prussian Large Line

In this example, showing the attack of the Prussian "Corps" under Friedrich II during the battle of Torgau, we can see that:

  • Friedrich der Grosse is here and there are 3 "Corps" leaders ('Holstein', 'Hulsen' and 'Karl') with him.
  • All leaders are not Out of Command.
  • All "Corps" have at least one Brigade which is juxtaposed side by side or front to back with another Brigade from another "Corps" or with a unlimbered artillery unit and all the concerned Brigades and unlimbered artillery units have the same facing.
  • There are units into the wood on the right which are in "A" formation or are limbered.
  • For the "Corps" commanded by 'Holstein', one infantry Brigade ('390 Kleist') is in Line and juxtaposed with other units also in Line but three cavalry Brigades are behind in 'Column' formation, following the road.

We assume that 'Hulsen' and 'Karl' have the same "Attack" Order, and that 'Holstein' has a "Maneuver" Order. Because the artillery unit '136' is unlimbered and links one Brigade of 'Karl' and one Brigade of 'Hulsen' which are in Line formation, all units of these two "Corps" can be selected at the same time, even though some of their units are in "A" formation and not in Line.

The Brigade '390 Kleist', belonging to the "Corps" of Holstein, cannot be selected at the same time than the two "Corps" of Hulsen and Karl because 'Holstein' does not have the same Order than 'Hulsen' and 'Karl'.

(E.1.3) Selection of a Wing of Brigades from Several "Corps" of Cavalry

(E.1.3.1) In General

Another way to select several "Corps" of cavalry at the same time is to form a Wing.

Infantry and artillery units cannot be included into a Wing.

A Wing could be selected by the relevant Wing leader (if any) but, if there is no Wing leader in the scenario, a Wing could also be selected by the General in Chief or the Second General.

(E.1.3.2) Requirements

Every turn, to form a Wing, several "Corps" of cavalry must:

  • Not be Out of Command (see E.1.5).
  • Have the same Order.
  • Be in Line formation and with the same facing.
  • Be juxtaposed front to back or linked by one of the concerned "Corps" leader.
(E.1.3.3) Formation Details

A Wing must consist of units from at least two "Corps". A Wing must be formed of at least two Brigades, which must come from at least two "Corps": a Wing has to be formed of one cavalry Brigade (or more) in Line formation from one "Corps" and one cavalry Brigade (or more) in Line formation from another "Corps".

A Wing could be formed by several Brigades coming from several "Corps".

All the "Corps" leaders who are concerned by the units forming the Wing must be activated. All units of these "Corps", even the units not forming the Wing, must be activated, one "Corps" after another.

Once activated the player has to flip the leader's counters and show, for each concerned counter, the side with the name of the leader.

(E.1.3.4) Extended Example of Wing

In this example, showing the French cavalry during the battle of Minden, we can see that:

  • Contades, general in Chief, is here and there are 3 "Corps" leaders ('Fitzjames', 'Dusmenil' and 'Poyanne').
  • All leaders are not Out of Command.
  • All the 3 "Corps" have at least one Brigade which is linked by a leader with another Brigade from another "Corps".
  • All the concerned Brigades are in Line formation and have the same facing.

If the 3 leaders have the same Order, they can be selected together, at the same time, as a Wing.

(E.1.3.5) Differences between Large Formation Types

Differences between a Wing, a Large Line and a Prussian Large Line:

  • Large Line and Prussian Large Line are very similar. The only difference is that, to form a Large Line, Prussian units, in addition to being juxtaposed side by side, can also be juxtaposed front to back. A Large Line and a Prussian Large Line could be composed of infantry and artillery, or of cavalry. Leaders are not able to link the units in order to form a Large Line and a Prussian Large Line.
  • To form a Wing, cavalry units from different "Corps" could be juxtaposed front to back but they cannot be side by side. A Wing must be composed only of cavalry units. Leaders can link the units in order to form a Wing.

(E.1.4) Movement of the Line/Wing Leader (if any) or the "Corps" Leader

(E.1.4.1) In General

The player, who has the initiative, may move his leader, now (before phases E.1.5 and E.1.6) or at the same time as his units (see E.1.7).

Once this leader is moved, the player flips the counter over to show the leader's name.

The movement allowance of the leaders is indicated at the top of the "Terrain Effects Table" depending of the army, in the line "Movement Points" and in the column "Leaders". For example, for the battle of Minden and for all the Allied leaders, the movement allowance is 24.

As the leader's counters have all around facing, they may move in any direction at any time. Change facing during movement does not cost any movement point (see on the "Terrain Effects Table" the second line called "Change facing during Movement").

Leaders may use the Road March (see on the "Terrain Effects Table" the fifth line called "Road March").

(E.1.4.2) Purpose

The leader can be moved for multiple purposes:

  • To rally or reorganise (see J.0 and L.0)
  • To be well placed for the organisation of his army
  • To prevent a unit to be out of command (see E.1.5)

(E.1.5) Out Of Command Check

(E.1.5.1) In General

When a player selects a Line/Wing or "Corps" leader, he has to check if this leader is Out of Command and, afterwards, he has also to check if the Brigades and Units of this leader are Out of Command.

Important: the Command status stays unchanged (with all effects) until the next turn.

(E.1.5.2) Command Range- Generals in Chief

All Generals in Chief have a range of Command of ten hexes, as the crow flies (the path must be free of enemy units).

All Line/Wing leaders and "Corps" leaders inside this range of ten hexes are in Command.

Even if a Line/Wing leader is Out of Command, each "Corps" composing that Line/Wing is in Command if its "Corps" leader is well inside the range of ten hexes of the General in Chief.

All Brigades and units inside this range of ten hexes are also in Command.

(E.1.5.3) Command Range- Second Generals

Remember that Second Generals are never Out of Command: they are independent and do not have to be within the range of Command of ten hexes from the General in Chief.

This Second General has a range of Command of eight hexes, as the crow flies (the path must be free of enemy units).

All Line/Wing and "Corps" leaders but also all Brigades and units under this Second General which are inside this range of eight hexes are not Out of Command.

If a Second General is captured or killed (See I.0), all Brigades and Units belonging to him are Out of Command if they are not inside the range of ten hexes of the General in Chief.

(E.1.5.4) Command Range- Other Leaders

Line/Wing leaders and "Corps" leaders have a range of Command of six hexes, as the crow flies (the path must be free of enemy units).

All Brigades and units belonging to the concerned Line/Wing or "Corps" and which are inside this range of six hexes are not Out of Command.

If a Line/Wing leader or a "Corps" leader is captured or killed (See I.0), all Brigades and Units belonging to him are Out of Command if they are not inside the range of ten hexes of the General in Chief (or inside the range of eight hexes of the Second General).

(E.1.5.5) Exceptions

Important:

  • When only part of a brigade's counter is within the range of Command of a General, the rest of the brigade's counter is not Out of Command, as well as all the units belonging to this brigade and being on the brigade's counter (whether they are disorganised or not).
  • Independent and artillery units cannot become Out of Command.
  • Panicked units are always Out of Command.
(E.1.5.6) Out Of Command Effects - Leaders

An Out of Command Line/Wing or "Corps" leader cannot have any order and ALL current Orders marker are removed from the leader's box and the Orders in Transit boxes on the "Orders/Organisation Sheet".

Out of Command Line/Wing or "Corps" leaders will not have any order until they receive a new order at an "Issue New Orders" subsequent phase.

Reminder: Only the General in Chief and the Second General may issue new orders and may do so only for leaders into their Command range and during the Orders Phase of each 1st half hour turn (see rule C.1.2).

(E.1.5.7) Out Of Command Effects – Brigades & Units

When Out of Command (and even if their "Corps" leader is in Command), Brigades and Units take defensive positions. They must act as if they have a Defend order (but this marker is not put on the leader's box):

  • They may not move more than one hex, in any direction.
  • Units may not move into enemy ZOI. However, a unit already in an enemy ZOI at the beginning of his turn may remain in the hex or withdraw one hex.

Units which are Out of Command are moved after the units which are In Command.

(E.1.5.8) Out Of Command Effects – Panicked Units

As all Panicked units are Out of Command, Panicked units can move but only one hex.

Then, during the Rout phase (See K.0), and if these units are still Panicked after the Rally phase (See J.0), they must spend all Movements points they have in "A" formation (see the Terrain Effects Table).

(E.1.6) Ignore an Order

(E.1.6.1) Attempt To Ignore An Order

A Line/Wing or "Corps" leader, when In Command, may attempt to ignore an inappropriate order by conducting a successful Task Check (see rule 6.0): if the Task Check is successful, any Order Marker is removed and the Line/Wing or "Corps" is without orders.

The leader will be without order until he receives new orders from his General in Chief (or by the Second General). Consider this leader without orders as an Out of Command leader (and all the units under his command have also to be considered as Out of Command).

(E.16.2) Attempt Of Action Despite The Absence of Orders

A Line/Wing or "Corps" leader that has no current orders may conduct a new successful Task Check if he wants his Brigades and Units to take any action. This check can be done just after a successful Task Check carried out to ignore an order: the leader must thus pass two successive Task Checks.

If the Task Check fails, the player has to continue to consider the Line/Wing or "Corps" leader as an Out of Command leader and follow the Out of Command Effects.

If the Task Check is successful, the Brigades and Units of each concerned "Corps" leaders can act as if they had to obey one of the four orders, at the player's choice (not necessary the same order per leader). These Brigades and Units can act only this turn.

If the player wants to continue to act the next turn(s) with a Line/Wing or "Corps" leader that has no current orders, he will have to conduct a new (only one) Task Check.

Important: No Order marker must be assigned to the concerned leaders: these are still without orders.

(E.1.7) Requirements for Movement of the Units of Line/Wing or "Corps"

(E.1.7.1) Which Units Can Move

When one of the Line/Wing or "Corps" leader is selected, all the units of this leader which are not Out of Command can be moved: all the Brigades and all the attached Units, which are not Out of Command, are selected and can move.

If he was not previously moved during phase E.14, the leader can also move (as described in E.14).

(E.1.7.2) Primary Moving Entity is Square Counter

Once a square counter of a unit is placed on the map, the corresponding part of its Brigade counter is no longer taken into account for Movement: only the square counter is.

(E.1.7.3) Movement Allowance

The movement allowance for each type of units is indicated at the top of the "Terrain Effects Table" (see 2.7) in the column where the type of unit is listed and depending of the army. A unit's movement allowance may vary, depending on its formation.

The shown number represents the maximum number of movement points the selected unit may expend in a single phase (Road March movements can add one or three hexes to this maximum number).

The movement allowance of a Brigade is always that of the least rapid unit forming the Brigade.

(E.1.7.4) Change of Facing

Change of facing during movement does cost one movement point for all units except for infantry in "A" formation, limbered light artillery, light infantry, cavalry in "A" formation, light cavalry in "A" formation, and leaders (see the second line of the "Terrain Effects Table").

(E.1.7.5) Light Units

The units which are light cavalry units or light infantry units are indicated in the "Type of Unit" columns on the Units Data player aid card.

Important: For movement, units in Dispersed formation are always considered as light infantry or light cavalry in "A" formation and Shaken units are always considered as units in "A" formation.

(E.1.7.6) Detaching Units from a Brigade

A unit can be moved out of its Brigade counter and can come back to it later, but remember:

  • the Brigade counter will be removed if more than half of the units that compose it are disorganised
  • the moved unit could be Out of Command the next turn.
  • the unit which came back on its Brigade counter remains on the map as long as the unit has not been rallied (see J.0).

Note that, if two square counters, coming from the same Brigade and the same hex, come out of the Brigade counter, the hex from which they come is not considered empty if the Brigade counter is still present: the enemy cannot occupy this hex (but the enemy cannot fire nor charge on this hex).

(E.1.7.7) Movement of a Large Line/Wing

When a Line/Wing is formed, all units forming the Line/Wing are considered to move at the same time, as a whole.

If a cavalry Reaction Charge is announced against a unit of the Line/Wing, all units forming the Line/Wing must stop their movement at the same time as the unit targeted by the Reaction Charge.

(E.1.7.8) Movement of a Small Line

When several brigades from the same "Corps" are juxtaposed side by side, in Line formation and with their identical facing, they can be moved at the same time, as a whole, forming a Small Line.

All the counters which are on the Brigade counters are moved at the same time.

If a cavalry Reaction Charge is announced against one of these units, all units must stop their movement at the same time as the unit targeted by the Reaction Charge (see the procedure in H.2).

(E.1.8) Movement of a Brigade with a Multi-Hex Counter

(E.1.8.1) Movement on a Road of a Brigade in Column

Remember that Brigade (and Unit) counters face one hexside when a Brigade is in Column.

Only the front side (i.e the first part of the Brigade counter which is represented by the head of the arrow drawn on the multi-hex counter: here, for the 3 Brigades shown, the units numbers "611", "621" and "631") of the multi-hex counter must be taken in consideration.

Important: Reverse movement is not permitted for any brigade in column.

The parts of the counter stretched into hexes behind do not have to be considered and, when a Brigade is following a road in Column, it must be considered that all the units of the Brigade follow the twists and turns of the road, not having to occupy their exact physical space.

For example, if we take back the situation shown just above, the Brigade "620" is in fact following the road and, because the road is turning, the second part of the Brigade (units "623" and "624") must be considered not behind the first part but situated in a 'dog leg' on the left, with their facings to the top of the hex, where the road is exiting the hex.

Ignore the off-road portion of the counter: it does not count against friendly stacking, nor block enemy movement.

Remember that the units which are forming the second or the third part of the Brigade must be considered on the road, not on the hex where the counter is: thus, if a Brigade following a road is fired on, the target hex is the hex of the road, not the hex where the second or third part of the counter is.

(E.1.8.2) Movement of a Brigade in Column not on a Road

Even if it is indicated on the Terrain Effects Table that changing facing during Movement does not cost any movement point to units in Column (in "A" formation), a Brigade in Column which does not move on a road, to benefit from the free change of facing, must move after the change of facing at least one hex (for a 2-hex Brigade) or two hexes (for a 3-hex Brigade).

If these additional movements are not possible and the Brigade wishes to change facing, and thus stay in place, it must "wheel" (see E.1.8.5).

Important: when a Brigade in Column is fired on or charged, the multi-hex counter of this Brigade is automatically replaced by all the relevant square counters of the composing units, in "A" formation. It is therefore definitely more secure for a Brigade in Column not to be within range of the enemy!

[For an example of replacement of a multi-hex counter by the relevant square counters, the situation of the Brigade "620" targeted by enemy artillery: image.]

(E.1.8.3) Road March

All units not in Line or Unlimbered formations may add to their movement allowance a number of hexes (given by the Terrain Effects Table) on Minor and Major roads.

Units using Road March to enter a hex pay the cost of the road (one movement point), not the cost of the other terrain in the hex.

To use Road March, a unit may not be in Line or Unlimbered and must be moving directly from one road hex to another: this unit must move along a road throughout its movement.

If so, the unit has a bonus of movement points, as indicated on the "Terrain Effects Table" in the column where the type of unit is listed and depending of the army. The value of this bonus depends of the kind of the road and can change depending of the battle (for Minden, the bonus is: 1 hex more on a Minor road or 3 hexes more on a Major road).

A unit can obtain the Minor roads bonus if it performs ALL its movement on Minor roads. If a unit makes ALL its movements on a mix of Minor and Major roads, then it only benefits from the Minor road bonus. To obtain the Major roads bonus, a unit must perform ALL its movement on Major roads.

Reminder: on the maps, the Major roads are those with trees on either side.

Roads passing through bridges or villages (and towns) are not interrupted and therefore the hexes of bridge and village (or town) count in the calculation of the expenditure of movement points for the Road March.

Every village (or town) hex is considered to have connecting roads, even if a road is not drawn.

Fords and destroyed bridges interrupt the roads.

(E.1.8.4) Movement of a Brigade in Line

Whenever a multi-hex counter enters more than one type of terrain simultaneously, it expends movements points equal to the highest terrain cost (see the "Terrain Effects Table").

If a multi-hex Brigade counter enters terrain requiring a unit to become Disordered, only the units affected by the disordering terrain become Disordered.

Even though an unit in Line is not allowed to move into Woods, Forests or Soft Cover (i.e. with a white dot) hexes, a multi-hex Brigade in Line may move into such a hex, but the square counter(s) of the unit(s) affected by the disordering terrain must be placed (i.e. stacked) on the Brigade, on the "A" side and facing a hexside.

Remember that counters face vertices when in Line and they face a hexside when in "A" formation.

Reminder: when more than half of the units making up a Brigade are Disordered, the multi-hex counter must be removed from the map and exchanged by the relevant units square counters.

Important: For brigades composed of 3 units, the central unit can be considered as being on the left or on the right, at player's choice. For brigades composed of 5 units, the 2nd and the 4th units can be considered as being on the centre (while respecting the stacking limits), at player's choice.

(E.1.8.5) "Wheel" Maneuver

A "wheel" can be done only in Clear, Difficult Ground, Marsh hexes and across Elevation hexsides but it's not possible in or across all other Terrain hexes or hexsides.

When changing facing, multi-hex counters must "wheel" through intervening hexes, which must be clear of any units or any prohibited ground features.

To properly execute the "wheel", one end of the multi-hex counters must remain in place and the other end must be moved to form a new line that still faces vertices.

The "wheel" can be made on the left or on the right.

Each unit of a Brigade, even the units which remained in place, is considered to have used the same Movement Points as the units which are in the moving end of the multi-hex counter.

When done in Clear hexes, a "wheel" costs one movement point per degree of wheeling for a 2-hex Brigade and two movement points per degree of wheeling for a 3-hex Brigade (for each brigade, there are 6 degrees of wheeling).

When done in Difficult Ground or Marsh hexes, a "wheel" costs three movement points per degree of wheeling for 2-hex and 3-hex Brigades.

Crossing Elevation hexsides costs no movement point.

A rearward "wheel" (of 1 degree on the left or in the right) is allowed but at the cost of the entire movement allowance and for a 2 hex Brigade only. For a 3 hex Brigade, a rearward "wheel" is not allowed.

Example of forward "wheel", with three Allied Brigades in Minden: we suppose the player wants to do a "wheel" on the left with all the three Brigades (the numbers in the circle indicates the movement points spent):

  • Brigade "820 Urff" will spend only one movement point to do the "wheel" one degree on the left (Clear hexes).
  • Brigade "710 Einsiedel" will spend three movement points to do it (Difficult Ground).
  • Brigade "810 Holstein" will spend six movement points (all their available movement points) to do it: two degrees of wheeling with Difficult Ground.
(E.1.9) Transition from One Formation to Another
(E.1.9.1) In General

Reminder: artillery units cannot change formation when they are within an enemy ZOI (see rule 4.4).

Historical Note: during the Seven Years War, units took Line formation before being in enemy line of sight, to minimize its artillery and cavalry effects.

To change from Line formation to "A" formation (column) AND from "A" formation (column) to Line formation costs:

  • Zero movement point for infantry and cavalry units.
  • One movement point for 1, 2 or 3 hex Brigades and artillery units.
(E.1.9.2) Change Formation – Square Counter

Square counter units that change formation have to keep the same orientation: if before the transition, the unit faced an hexside, it must face after the change one of the two vertex which are in each side of this hexside. If the unit faced a vertex, it must face after the transition one of the two hexsides which are in each side of this vertex.

The player has just to flip the counter when he wants the transition to occur: it costs zero movement point for infantry and cavalry units, and one movement point for artillery units.

(E.1.9.3) Change Formation – Brigades

For the Brigades (1, 2 or 3-hex counters), the player has to flip the counter when he wants the transition to occur.

But, as historically, to pass a Brigade from Column to Line, the best to do is, before the change of formation, to turn to the left or to the right and to move parallel to the enemy line. Then, when the player wants the transition to occur, he'll have to stop, and, if the brigade is moving to the left, to make an about-face then flip the counter or, if the brigade is moving to the right, just to flip the counter.

To pass a Brigade from Line to Column, the player has to flip the counter when he wants the transition to occur and he has the choice to place the head of the column facing to the right or facing to the left.

These transitions for the Brigades cost one movement point.

Historical Note: during the SYW, the "senior" unit (the unit #1 of a brigade) was generally placed on the right of the brigade when in Line and at the head when in Column.

(E.1.9.4) Special Deployment for 3-Hex Brigade in Column

Especially for the 3-hex Brigades in Column and only when they want to make a transition from Column to Line, they can "wheel" and advance only one hex on the left or on the right and then make the transition from Column to Line.

This special deployment costs three movement points if it is done in Clear hexes and six movement points if there is any Difficult Ground or Marsh hex crossed during the deployment.

Example (picture below): 3 French Brigades under De Muy, the Brigades "620 Royal Baviere" and "630 Waldner" have already made their transition from Column to Line. The 3-hex Brigade "610 Piémont" is situated in Column just between the two other French Brigades. The French player wants to deploy the "610 Piémont" Brigade in Line between the two other French Brigades (at the cost of three movement points).

The reverse deployment is not possible: to change formation from Line to Column, a 3-hex Brigade counter must be flipped, at a cost of one movement point.

(E.1.9.5) Movement Allowance Impact

Important: When a unit changes its formation (from Line to Column, from Column to Line, from Line to Adapted, from Adapted to Line, from Limbered to Unlimbered, from Unlimbered to Limbered) during a same movement, the Movement allowance of the unit in Line or Unlimbered has to be considered.

(Note: the source text of this line is missing its first letter; "When" is read here.)

If a unit changes its formation from "A" (Column) or Limbered to Line or Unlimbered, it has to finish its movement with the Line or Unlimbered movement allowance.

For example: a Limbered artillery unit (Movement Points = 9) spends 7 or 8 MP and changes Unlimbered (MP = 6), there is 0 MP left. If it spends 4 MP and changes Unlimbered, there are 2 left.

If a unit changes its formation from Line or Unlimbered to "A" (Column) or Limbered, it has to keep the Unlimbered movement allowance (until the end of this turn). Next turn only, the unit will be able to use the "A" (Column) or Limbered movement allowance.

For example: an Unlimbered artillery (MP = 6) spends 4 and changes Limbered (MP = 9), there are 2 left only. Next turn, this unit will be able to spend 9 MP if it remains Limbered throughout the turn.

This principle applies across all formation changes for all unit types.

E.2 For one Line/Wing or "Corps" Leader of the Player who does not have the initiative for this Turn

See E.1 (and then E.1.1 to E.1.8) and follow the same procedure than the player who previously had the initiative.

E.3 then E.4 then E.5, etc. For another Line/Wing or "Corps" Leader of the two Players, alternatively

See E.1 (and then E.1.1 to E.1.8) and follow the same procedure until all the leaders have been selected.

F.0 Phase of the Brigades or Units Not Previously Activated (alternatively)

F.1 For the Brigades or Units of the Player who has the Initiative for this Turn

(F.1.1) Movement of Independent Brigades or Units

Each player could have some Brigades, or rather Units, which are independent: they are often detachments of light infantry or light cavalry and are generally identifiable by their dark green picture frame on the "Order of Battle" (at the end of the Game Rulebook) and the "Orders / Organisation Sheets".

To help the player, all independent units are listed at the beginning of each scenario.

These units do not have any "Corps" leader, they do not receive any order and are never Out of Command.

The player may move successively all these units, one by one. The procedure for the movement of each unit is the same as the one described in E.1.7.

(F.1.2) Movement of Units from Entry Points and Movement of Reinforcements

Arriving units and reinforcements are always in command and activated at the end of the turn in which they enter.

(F.1.2.1) Arrival of Units per Scenario Setup

After the player has decided which Line/Wing or "Column" will enter where and when (see phase A.2), units have to arrive at entry points on the edges of the board.

These arriving units will enter the map following the organisation shown on the "Orders / Organisation Sheets" (from top to bottom) and always in numerical order (from the smallest to the highest).

(F.1.2.2) Arrival of Reinforcements

Sometimes, reinforcements could enter the game at time and location specified in a scenario: they are considered as arriving units from entry points and the player has to follow the same procedure than described in A.2.

(F.1.2.3) Arrival Movement Costs

It must be considered that, for one arrival point, the arriving units (or stacks) follow one behind the other: they do not arrive at the same time but one after the other. Thus, if the first unit (or stack) pays one movement point to enter, then the second would pay two movement points, and so on.

(F.1.2.4) Blocked Entry Point

If an entry point on one side of the map is blocked by an enemy unit or an enemy ZOI, the player has the option of delaying the arrival of his units or moving them at the closest available hex free of enemy unit or ZOI. If there are two equidistant hexes, the player may select one of the two.

F.2 For the Brigades or Units of the Player who does not have the Initiative for this Turn

See F.1 (and then F.1.1 to F.1.2) and follow the same procedure than the player who previously had the initiative.

Reciprocal Phases

G.0 Fire Procedure (reciprocal)

Historical Notes: During the Seven Years war, all armies were armed with smoothbore muskets. These weapons made a lot of smoke and noise but were very inaccurate. The musket's maximum range was near 300 meters and the effective range was between 180 and 225 meters. To increase firepower, massed volleys, with infantry in Line, were used but they made more loss to morale than to health. Artillery was much more effective, bloody and deadly but it was used without mass effect and sparingly.

G.1 Arc of Fire

(G.1.1) Definition

An infantry unit in Column can only fire at a unit out of its lone frontal hex.

Unlimbered artillery, in Line, Shaken or Panicked infantry can fire at a unit out of its two frontal hexes.

Dispersed infantry can fire at a unit from all sides.

The distance of this fire depends on the range of the firing weapon: 1 hex for an infantry unit and up to 12 hexes for an artillery unit, depending on the firing cannon.

(G.1.2) Illustrative Examples

  • For an Austrian 24pdr having a maximum range of 12 hexes: [diagram omitted]
  • For a single infantry unit in Column and in Line: when in Column, the unit can fire on the frontal hex, when in Line, it can fire on two hexes.
  • For a 1-hex infantry Brigade in Column and in Line, composed of two units: when the Brigade is in column, the lead unit can fire on the frontal hex, when in Line, both units can fire, each, on one of the two hexes in front of them.
  • For a 2-hexes infantry Brigade in Column and in Line, composed of three units: when the Brigade is in column, the lead unit can fire on the frontal hex, when in Line, the unit on the right can fire on the two hexes on the right, the unit in the centre can fire on the hex in the centre and the unit on the left can fire on the two hexes on the left.
  • For a 2-hexes infantry Brigade in Column and in Line, composed of four units: when the Brigade is in column, the lead unit can fire on the frontal hex, when in Line, the two units on the right can fire on the hex on the right and the hex on the centre, the two units on the left can fire on the hex on the left and the hex on the centre.
  • For a 3-hexes infantry Brigade in Column and in Line, composed of five units: when the Brigade is in column, the lead unit can fire on the frontal hex, when in Line, the two units on the right can fire on the two hexes on the right, the unit in the centre can fire on the two hexes in the centre, the two units on the left can fire on the two hexes on the left.
  • For a 3-hexes infantry Brigade in Column and in Line, composed of six units: when the Brigade is in column, the lead unit can fire on the frontal hex, when in Line, the two units on the right can fire on the two hexes on the right, the two units in the centre can fire on the two hexes in the centre, the two units on the left can fire on the two hexes on the left.

G.2 Line of Sight (= LOS)

(G.2.1) Determining LOS

A unit may only fire at a unit it can see and a unit sees only out of its frontal hex sides, constituting its ZOI (see 4.0): it may never see out of its flanks or rear hex sides. So, a unit can only fire into or through its front hexes.

A LOS only exerts through the front of a unit = the hex(es) touching the front of the counter, not through the flanks of a unit = the hex(es) to the side left and right of the counter, or the rear of a unit = the hex(es) touching the rear of the counter.

A unit in Column always has only one front hex and one rear hex while a unit in Line always has only one flank hex to the side left and right.

A LOS is determined by tracing a straight line from the centre of the firing unit's hex to the centre of the target unit's hex.

(G.2.2) Blocking Terrain & Elevations

The LOS is blocked if any hexes along the LOS contain any units, Soft covers (wood, village, etc.) or elevation levels higher than those occupied by the firing unit and the target unit.

The LOS is not blocked if any units or Soft covers (wood, village, etc.) are on elevation levels lower than those occupied by the firing unit and the target unit.

(G.2.3) Gently Rolling Terrain

If there is an elevation where the firing unit is, then a lower elevation level and then a second elevation at the same level than the firing unit, the LOS is blocked at the end of the second elevation or by units or Soft covers on this elevation.

When a LOS is blocked by units or Soft covers, it's at the end of the first unit or Soft cover hex and when the LOS is blocked by elevations, it's at the end of the elevation hexes.

Design Note: the differences in elevation simulate very gentle slopes: flat terrain going down or up (there is no "plateau effect").

(G.2.4) Upslope & Downslope

It must be noted that, if there is a upslope hex side (not an elevation) between the firing artillery unit and a targeted unit which is on a higher ground than the firing artillery unit, the upslope hexside stops the fire (the targeted unit is safe). Howitzer and Mortar artillery batteries are not affected by this rule.

When at the bottom of a slope (not an elevation) hex side, only muskets, howitzers and mortars may fire but only into an adjacent hex, guns cannot fire.

(G.2.5) Illustrative Examples

[Examples of LOS where A = Player's unit, T = Targeted unit and red color is showing where the LOS is blocked: diagrams omitted.]

G.3 Fire Phase for Unlimbered Artillery

(G.3.1) In General

Only Unlimbered artillery may fire.

Each unit always fires individually: two or more units may not combine their strength to fire on the same enemy unit. But the same enemy unit could be the target of several units, which will fire one by one against it.

(G.3.2) Wood, Forest & Soft Cover

Since Unlimbered artillery cannot enter Wood, Forest, and Soft cover hexes, it cannot fire from these hexes.

Unlimbered artillery, when targeted, has protection when "on the edge" (i.e. adjacent to) a Wood, Forest and Soft cover hex. The benefit of being in the edge of a Wood/Forest hex is lower than being in the edge of a Soft cover hex, which is itself lower than being in a Hard cover hex (see the Fire Combat Results Table).

(G.3.3) Fire Direction & Selection

The player who has the initiative for this turn decides if artillery units are fired from left to right or the other direction by selecting the left- or rightmost eligible unlimbered artillery unit he wishes to start with.

Only a single counter can be selected, not a stack. The player, then, selects one enemy unit which is situated in the range of fire and in the LOS of its selected artillery unit and then resolves his fire.

Remember that, if two square counters, coming from the same Brigade and the same hex, come out of the Brigade counter, the hex from which they come cannot be fired upon.

The other player (the second one) then follows the same Fire Phase by selecting a unit on one of his flanks (not necessary the same flank than the first player) and resolving his fire.

(G.3.4) Reciprocal Resolution

The first player then fires a second unit by proceeding down the length of his army from the side he started to the other. Then continue alternating until all desired and permissible fires have been executed.

Once a player chooses a direction of fire resolution, he may not change that direction, but may skip over units he does not want to fire at all during this phase.

Important: It's never mandatory to fire.

(G.3.5) Ranges of Fire

There are three different ranges of fire.

(G.3.5.1) Point Blank Range

Point blank (or short range) corresponds to the very short distance where Canister or Grape shots were fired. This fire was very lethal and can annihilate charges (essentially the cavalry charges): that's why 3pdr or 6pdr guns were added to infantry battalions.

Historical Note: Infantry battalions without 3pdr or 6pdr guns were much more vulnerable to cavalry charges.

(G.3.5.2) Medium Range

Medium range (or effective range) corresponds to the distance made directly by the solid shots, without ricochets: this fire is effective and could be lethal.

Design Note: It is strongly recommended to put infantry units in Line before entering Medium effective range of artillery because staying in Column would be too lethal.

(G.3.5.3) Maximum Range

Maximum range which corresponds to the distance made by the solid shots with ricochets.

Design Note: Artillery fire at this range is not effective as such, but can disturb the targeted unit, able to shake or even panic it. Firing at this distance is so inaccurate and harmless that the enemy can still be in column without too much damage.

(G.3.5.4) Illustrative Examples

Examples of Arc of fire, Range of fire and LOS: below, one example with a unit of 4pdr French guns. The red crosses designate hexes which are not in the LOS of the artillery unit which therefore cannot target units hidden by woods, elevation and village hexes. Only howitzers and mortars would have been able to fire into these hexes with a red cross. Concerning the 5 red crossed hexes behind the elevation, if we trace a straight line from the centre of these hexes to the centre of the firing unit's, this line crosses or touches the hex of the elevation.

Important: Artillery units can fire into the wood hexes, the elevations and the hexes of villages but not through them.

Another example of Arc of fire, Range of fire and LOS: three Allied artillery units firing on French units in Line in Minden. The Hanoverian 6pdr guns have a limited range of fire and LOS (in orange) because the elevation just in front of the guns prevents firing to the right: the guns are able to fire on one of the two units on the right of the French Brigade "120 Belsunce", which is at Maximum range. The Hanoverian guns aren't able to fire on the French Brigade "170 Auvergne", even if this Brigade is well in the range of fire and LOS, because this Brigade is behind the French Brigade "120 Belsunce" which must be the first target. Only howitzers and mortars would have been able to fire on the Brigade "170 Auvergne". The Hessian 6pdr guns have also a limited range of fire and LOS (in pink) because of, on the left of the arc of fire, the Malbergen building which hides 4 hexes and, on the right of the arc of fire, the end of the elevation (the 5 hexes of ground on the other side of the elevation are out of the LOS).

The Hessian guns are still able to fire on a good part of the French 1st line of infantry and cavalry, but also on the artillery unit, in front of them.

Let's assume that the British guns below the Hessian ones are 12pdr guns, they would have the same range of fire and LOS but, thanks to their longer range, they would be able to fire on the two red hexes (only these two hexes because LOS is stopped by the Neuland building and the end of the elevation).

(G.3.6) Artillery Fire Routine

The Artillery Fire Routine is used to resolve all artillery fires.

  1. Refer to the Fire Combat Chart (two sides).
  2. Look at the "Relative Firepower Tables" in the "Firing Artillery" table.
  3. Determine the line corresponding to the firing artillery unit, depending of the type of gun and then of the range of fire (distance in hexes of the target from the firing unit).
  4. Determine the column depending of the quantity of firing guns, which is always split in four columns on the "Firing Artillery" table. The quantity of guns for an artillery unit is written on the Order of Battle, under the concerned unit. But, for ease of use, one to four shells are also shown on each artillery unit counter: when there is one shell on the counter, look at the leftmost quantity of guns... and, in the same way, when there are four shells on the counter, look at the rightmost quantity of guns.
  5. After the column is determined, look at the letter in a circle at the top of the column ("A" to "F") and memorize it.
  6. Flip the Fire Combat Chart and look at the "Fire Combat Results Table".
  7. Determine the type of "Targets" corresponding to the target (its kind and/or its situation).
  8. In this type of "Targets", roll the die (1 to 6) and determine the corresponding line.
  9. Cross-index this line with the column corresponding to the memorized letter ("A" to "F") and determine the result.
  10. Look at the "Fire Combat Results" to execute the result immediately, before any other unit fires.
(G.3.7) Risk of a Leader Loss

If an artillery unit is firing at Point blank on a unit with a stacked leader, the firing player must roll the die for the leader, to see if this one is killed (See I.0).

(G.3.8) Fire Combat Results

The Fire Combat Results, situated at the bottom of the "Fire Combat Results Table" dictates the effects of fire.

(G.3.8.1) Effectiveness Check (EC)

An EC has to be done for the unit of the defender. If the Check is successful, it is unaffected.

If the Check fails, it suffers a Disorganisation: it is reduced one "morale" level (a unit within a Brigade counter breaks into its single square counter unit, a well formed unit becomes shaken and a shaken unit will panic). Replace the counters on map by the relevant counters of the unit in question on the Organisation sheet.

See Rule 6.3 "Effects of a Disorganisation" for more explanation.

Very important: for targeted artillery units, the "EC" effect is not taken in consideration in the "Fire Combat Results Table". A targeted artillery unit ignores this result!

Note: the source text reads "brakes" in this sentence; "breaks" is read here.

(G.3.8.2) Disorganisation (D)

The unit of the defender suffers automatically a Disorganisation and the present unit's counter on the map must be replaced by a new counter.

A targeted artillery unit is destroyed: the counter is removed.

(G.3.8.3) Either Disorganisation or Panic (D/P)

An EC has to be done for the unit of the defender. If the Check is successful, it suffers a Disorganisation and the present unit's counter on the map must be replaced by a new counter, and if the Check fails, it is automatically Panicked: the Panicked counter of the defender's unit must be placed on the map, replacing the present counter.

A targeted artillery unit is destroyed: the counter is removed.

(G.3.8.4) Panic (P)

The unit of the defender is automatically Panicked and the Panicked counter of the defender's unit must be placed on the map, replacing the present counter (any artillery unit is destroyed: the counter is removed).

The unit must recoil 2 hexes and must perform a Rout during the next Rout Phase of this turn.

Special results for "P" units are indicated in the "Fire Combat Results Table", which supersede the above results.

(G.3.9) Fire on Buildings & Wooden Bridges
(G.3.9.1) In General

Artillery can fire on buildings and bridges trying to set them on fire or destroy them.

(G.3.9.2) Heavy Artillery Fire

Only heavy artillery can attempt to destroy wooden bridges. A wooden bridge is destroyed if a heavy artillery unit fires at it at Point blank range and is successful by rolling a "6". Buildings and stone bridges cannot be destroyed.

Historical Note: On the day of a battle, artillery was not used to bring down walls, buildings, or fortifications. Mortars, specifically used for this purpose, were even kept in reserve.

When a wooden bridge is destroyed, it can no longer be used and this Marker is put on it until the end of the battle:

(G.3.9.3) Howitzer Fire

Only Howitzers (any) can attempt to set fire to buildings or wooden bridges.

A wooden bridge is set on fire if a Howitzer unit fires at it at Point blank range and is successful by rolling a "6". A building is set on fire if a Howitzer unit fires at it at Point blank or Medium ranges and is successful by rolling a "5" or "6". If it fires at it at Maximum range, a roll of a "6" is required to succeed.

When a wooden bridge or building is set on fire, no unit can remain, enter it or use it and this marker is placed on it until the end of the battle:

If a unit is in the building set on fire, a "D/P" EC has to be done, apply the appropriate result ("D" if passed, "P" if failed) and, if the result is "D", the unit has moreover to recoil 1 hex in the opposite direction to the nearest enemy unit and keeping its facing.

G.4 Fire Phase for Infantry

(G.4.1) In General

Only the infantry units may fire in this phase. Cavalry units, leaders and baggage may never fire.

Each unit always fires individually: two or more units may not combine their strength to fire on the same enemy unit. But the same enemy unit could be the target of several units, which will fire one by one against it.

(G.4.2) Fire Direction & Selection

The player who has the initiative for this turn selects one of the eligible infantry units (one battalion from a Brigade counter or one counter from a stack) which is occupying a hex on the far side of either his army's flank.

The player, then, selects one enemy unit which is situated in the front hex(es) and in the LOS of its selected infantry unit and then resolves his fire.

The other player (the second one) then follows the same Fire procedure by selecting a unit on one of his flanks (not necessary the same flank than the first player) and resolving his fire.

(G.4.3) Reciprocal Resolution

The first player then fires a second unit by proceeding down the length of his army from the same flank where his first unit was selected. Then the second player fires with a second selected unit, in the same way, from the same flank he has already and previously chosen. Continue alternating until all desired and permissible fires have been executed.

Once a player chooses a direction of fire resolution, it may not change that direction, but may skip over units that do not fire at all in that phase.

Important: It's never mandatory to fire.

(G.4.4) Infantry Fire Routine

The infantry Fire Routine is used to resolve all infantry fires.

(G.4.4.1) Conduct Fire Task Check

If the player wants a unit to fire, a Task Check (see 6.0 for the procedure) has first to be conducted for this unit, to see if it has enough effectiveness to well conduct a Fire Routine. If the Task Check is successful, the unit can begin the Fire routine.

If the Task Check fails, the phasing player has instantly the choice to:

  1. not begin the Fire Routine for this unit (it will not fire this turn) or...
  2. to conduct an EC: if successful, the unit can begin the Fire Routine, but, if failed, the player will not begin the Fire routine for this unit (it will not fire this turn) AND the owning player has to apply a Disorganisation to the unit.
(G.4.4.2) Conduct Fire Combat

A unit which can fire at a targeted enemy unit follows this process:

  1. Refer to the Fire Combat Chart (which has two sides).
  2. Look at the "Relative Firepower Tables" in the "Firing Infantry" table.
  3. Determine the line corresponding to the firing infantry unit, depending of its kind and/or its situation.
  4. To determine the column normally depends on the result of the addition of the Combat strength and the Effectiveness rating of the firing unit, values which are written on the Order of Battle, under the concerned unit. But, for ease of use, the result of this addition is summarized and the identification's number of each unit is shown on the Firing Infantry Table into the right case: so the player only has to look for the identification's number of the concerned unit to determine the column.
  5. After the column is determined, look at the letter in the circle at the top of the column ("A" to "F") and memorize it.
  6. Flip the Fire Combat Chart and look at the "Fire Combat Results Table".
  7. Determine the type of "Targets" corresponding to the target (its kind and/or its situation).
  8. In this type of "Targets", roll the die (1 to 6) and determine the corresponding line.
  9. Cross-index this line with the column corresponding to the memorized letter ("A" to "F") and determine the result.
  10. Look at the "Fire Combat Results" to execute the result immediately, before any other unit fires.
(G.4.5) Risk of Leader Loss

If an infantry unit is firing on a unit with a stacked leader, the firing player must roll the die for the leader, to see if this one is killed (See I.0).

(G.4.6) Extended Fire Example

Example of Fire Routine in Torgau, when the Prussian grenadiers attacked the Austrian line, around 2PM:

9 Prussian battalions are adjacent to Austrian units. The Prussian player, who has the initiative, wants to begin a Fire Routine against the Austrian units. He selects first the unit of Grenadier "012" (#1 in blue circle), the last on the right of his line. The Task Check is a success.

The Prussian player decides to fire on the Austrian unit "124" (but he could have also decided to fire on the Austrian unit "123", or even on units "122" or "121"). The Prussian player looks at the "Relative Firepower Tables" in the "Firing Infantry" table and determines that the right column for this 'Unit in Line' is the third one and he memorizes the letter "C". Then, he flips the Fire Combat Chart and look at the "Fire Combat Results Table". The target is a unit in a 'Brigade in Line'. The Prussian player rolls a "3" and the determined result, after having cross-indexed the line and the column "C", is an Effective Check for the Austrian unit, which is a success for the Austrian player: nothing happens, the Austrian unit stay in good order.

Note: Slopes are present at the left side of the Austrian Brigade "120 Pellegrini" and at the right side of Austrian Brigade "110 Hartenegg" but the slopes have no effect for firing infantry units (See G.2).

The Austrian player decides now to begin his Fire Routine with the infantry unit "123" (#2 in orange circle) which is selected. The Task Check is a success and the Austrian player decides to fire on the Prussian unit "013" (#2 in blue circle) which is under Prussian unit "012" (both are stacked). If the Austrian player causes losses to the Prussian player's unit "013", the latter must remove the Well Formed counter's unit from the map and replace it by the Shaken counter's unit. When it will be the turn of the Prussian player to continue his Fire Routine, he will have the choice to either fire with this weakened unit "013", or bypass this unit and fire with any another Prussian unit not yet selected.

Each player reciprocally selects the following units they wish to fire. For example, Prussian player could select unit "022" (#6 in blue circle) after selecting unit "012" and thus not select the units "013", "014" and "021". The Austrian player can select unit "124" (#3 in orange circle) even if the Prussian player have decided to not select some of his units.

A player may select only part of his units ready to fire and the other player, at the same time, may select all his units ready to fire: he will have to select, one after the other, all his remaining units ready to fire, even if the enemy is not firing with his units.

In this example, the Fire Routine ends when the Prussian unit "025" (#9 in a blue circle) and the Austrian unit "111" (#10 in an orange circle) have been reached.

Charge Phase

H.0 Charge Procedure (reciprocal)

Charges represent the psychological and physical confrontation that occurs when opposing units come close to hand-to-hand combat.

Unit that has an opponent in its Arc of Charge, can launch a Charge.

The Arc of Charge for cavalry and infantry is strictly identical to the Arc of Fire for infantry in Line (see G.1).

Charging only from adjacent hexes during the Charge phase is also true for cavalry. Only a cavalry Reaction Charge can be done from distant hexes (see H.2).

The purpose of a Charge is to overwhelm the enemy unit and force it out of the hex. The charging unit is considered to be attempting to enter the hex occupied by the defender.

If successful, the attacker can advance into the hex vacated by the defender, but only if no other defender unit is still present in the hex.

Reminder: if two square counters from the same Brigade and the same hex come out of the Brigade counter, the hex from which they came is not considered empty if the Brigade counter is still present: the enemy cannot occupy this hex (but however, the enemy cannot charge this hex either).

H.1 Charge Phase

(H.1.1) Terrain Restrictions

(H.1.1.1) In Clear, Difficult, Marsh, & Hard Cover

In all terrain types other than Wood, Forest and Soft cover, any cavalry and infantry units in Line formation may charge, all other units in any other formation may not.

(H.1.1.2) In Wood, Forest, & Soft Cover

In Wood, Forest and Soft cover, only units in Dispersed formation, infantry in "A" formation, light cavalry in "A" formation, and light infantry may charge, all other units in any other formation may not.

Note that light infantry is always in Dispersed formation.

(H.1.2) Unit Type Restrictions

Infantry units may not charge cavalry units: Cavalry units can be charged only by cavalry units.

Shaken or Panicked units, artillery units, leaders, baggage may never charge but can be target of a charge.

Important: when an infantry unit is stacked with an artillery unit, the infantry unit must be charged first. When this infantry unit is charged, the artillery unit can be charged by another enemy unit.

(H.1.3) Per Unit Limit of Only One Charge per Phase

Any charge can be made against no more than one enemy unit: multiple enemy units must be attacked one by one.

Per phase, a unit may charge only once and may only be charged once.

(H.1.4) Single Unit Charge

If a single unit is charging, the targeted unit must change its facing to face the charging unit: this change of facing is automatic and free of movement points.

A targeted unit cannot be charged on its flanks or rear if only one unit charges it. For a targeted unit to be charged on the flanks and/or rear, there must be two or three charging units.

(H.1.5) Multiple Units Charge

A maximum of three units may charge against one unit. But, for these units, the charging player will be able to take in consideration only one unit from the frontal hexes. Thus, the other two units will come from one or both flanks and/or the rear (two units can come from the same flank, but they cannot be stacked together) and they will be only used as support of the frontal charging unit.

Important: Any unit in support ignores the results of a charge.

To charge a unit on its flanks and/or rear gives a bonus to the charging unit (see the Charge Die Roll Modifiers at the bottom left of the Charge Results Table).

(H.1.6) Units with All Around or No Facing

As units in Dispersed formation have all-around facing, they can be charged on all faces and they can charge by all their sides.

As Shaken and Panicked units have no facing, they can be charged on all faces.

(H.1.7) Reciprocal Resolution

The Charge procedure is:

  • To make a first charge, the player who has the initiative (the first player) selects one to three of his eligible units, in any part of the map, and, then, he selects one enemy unit which is in the Arc of Charge of its selected unit(s) and executes the Charge Routine.
  • The other player (the second one) then follows the same procedure by selecting one to three of his units and executing his charge.
  • The first player then makes a second charge by selecting other unit(s) in the same way.
  • Then the second player makes a second charge at his turn.
  • Continue alternating until all desired and permissible charges have been executed.

Important: It's never mandatory to charge.

(H.1.8) Recoil Before Charge or After Enemy Advance

(H.1.8.1) Recoil Option for Defender's Cavalry

When a charge is announced against a defender's cavalry unit, this unit has the option of recoiling 3 hexes before the charge at the owning player's option. The recoil of 3 hexes must be done in the opposite direction to the announced charge and the facing of the recoiling unit at the end of the recoil is at player's choice.

An EC has to be done for the recoiling cavalry unit, at the end of the recoil, with a Die Roll Modifier of +2.

(H.1.8.2) Enemy Advance Forces Either Recoil or Charge

When an infantry unit in Line moves next to an enemy cavalry unit, that cavalry unit cannot remain in its hex without either charging the infantry unit or recoiling 3 hexes.

If a recoil of 3 hexes is chosen, no EC has to be done and the recoil of 3 hexes must be done in the opposite direction to the enemy movement and the facing of the recoiling unit at the end of the recoil is at player's choice; if the unit is part of a brigade counter, the entire brigade counter must be recoiled.

If a charge is chosen, it must be done during the Charge Phase: the cavalry unit must stay in place and cannot move anymore during this turn.

If a result of the Fire phase prevents the cavalry unit from charging, it doesn't charge, without any penalty.

(H.1.9) Charge Routine

The Charge Routine is used to resolve all charges.

  1. Refer to the Charge Chart (two sides).
  2. Look at the "Charge Opponents Ratio Table", used to determine the ratio which will be necessary to obtain the result of the charge. To determine this ratio, the player will have to start from "A" to finish at "C", keeping the same column from "A" to "B" and the same line from "B" to "C" (follow the arrows on the Table).
  3. Go first to "A" chart and determine the column corresponding to the combat strength of the defender's unit, depending if this unit is an artillery unit or an infantry unit. This combat strength is shown on the Order of Battle or on the Units Data.
  4. Go then to "B" in keeping the column you have just determined and, in this column, determine the line corresponding to the combat strength of the charging units. If there are two charging units, you've to make the sum of the two corresponding combat strengths. If there are three, make the sum of the three combat strengths.
  5. After the line from "B" is determined, look at "C" on the right, read the written ratio (5 possible ratios, from 50% to 300%) and memorize it.
  6. Flip the Charge Chart and look at the "Charge Results Table".
  7. Go to the left and find the ratio you've just memorized. There are six underlines attached to this ratio.
  8. Subtract the Effectiveness rating of the defender's unit from the Effectiveness rating of the attacker's unit which is on the front of the defender: the resulting number (negative or positive) is the Effectiveness rating differential. Locate this number on the horizontal line at the top of the Charge Results Table.
  9. Look at the Charge Die Roll Modifiers, on the bottom left of the Table, and sum all applicable Die Roll Modifiers. Roll the die (1 to 6) and add or subtract the sum from the die roll: results of less than 1 or greater than 6 are treated as 1 or 6, respectively. Determine the corresponding under-line attached to the memorized ratio.
  10. Locate the Charge result in Cross-indexing this under-line with the Effectiveness rating differential (number found in 8). There are two different results in two columns: the left one for the attacker, the right one for the defender.
  11. Look at the "Charge Results" on the bottom right of the Table to see how to apply immediately the result of the charge, before any other charge.
(H.1.9.1) Die Roll Treatment

Very important, in the Charge Results Table:

  • Die rolls lower than 1 are treated as "1" results for the Attacker and "-" results (no effect) for the Defender.
  • Die rolls greater than 6 are treated as "-" results (no effect) for the Attacker and "6" results for the Defender.

(H.1.10) Risk of Leader Loss

If a unit with a stacked leader is charged, the charging player must roll the die for the leader, to see if this one has to recoil, is captured or killed. (See I.0).

(H.1.11) Extended Charge Example

Example of Charge Routine in Minden, when the French cavalry charged the Spörcken's Brigades, around 7AM:

The French player wants to begin a Charge Routine against the Allied units and announces it. Eight squadrons of French cavalry (Brigade "230 Mestre de Camp") are adjacent to five battalions of British infantry and Hanoverian guards (Brigade "310 Waldegrave").

The French player wants to make four charges and selects first the unit "231" (#1 in black circle), the last on the right. The French player decides to charge the Allied unit "315" (#5 in a red circle) but he could have also decided to charge the Allied units "314" or "313".

The French player looks at the "Charge Opponents Ratio Table" in the "A" chart and determines the column to look at, knowing that the combat strength of the defender's unit is 7 (available on the Allied Order of Battle or on the Allied Units Data). Then, the French Player looks at the "B" chart and determines the right line which is 1>6, knowing that the strength of the French unit "231" is 3. Then, the French Player looks at the "C" column and determines that the ratio of the charge is 50%.

The French player flips the Charge Chart and looks at the "Charge Results Table", in the 50% part of the chart (top). He determines the Effectiveness rating differential in subtracting the Effectiveness rating of the Allied unit "315" (= 5) to the Effectiveness rating of his French unit "231" (= 6) which gives a result of +1.

The French player rolls a "4" and, knowing there is a die roll modifier of -1 because the defender is in heather (difficult ground), he has to look the line 3 in the column +1.

The final results of the charge are "R" for the French attacker and "D" for the Allied defender. The French unit "231" has to recoil 1 hex: the square counter of the unit in Line is put one hex behind the French Brigade counter, keeping its facing and the Allied unit "315" is Disorganised: the square counter of the unit in Line formation is put on the Allied Brigade counter.

After the Allied player has himself carried out one of his Charges, the French player may repeat the same Charge Routine for his 3 other units, if they can still do so following the successive reciprocal Allied Charges:

  • Unit "232" (#2 in black circle) will charge Allied units "313" or "314" (#3 and #4 in red circles).
  • Unit "233" (#3 in black circle) will charge Allied units "311", "312" or "313" (#1, #2 and #3 in red circles) if the latter was not already charged during this phase.
  • Unit "234" (#4 in black circle) will charge one of the two remaining Allied units not yet charged this phase.

Historically, the French cavalry Brigade charged the 5 Allied battalions but the Fire phase of the Allied battalions strongly disorganised the French squadrons.

In our example, with a disorganised French unit, the Effectiveness rating differential would have been 0 instead of +1 and, so, the result of the charge would have been "R" for the French attacker and no incidence for the Allied defender.

If the French had charged with two cavalry brigades instead of one, units from either brigade could have attacked the Allied brigade from the flank and rear.

Let's imagine the French player wants to launch a Charge Routine against the Allied units and announces it: 16 French cavalry squadrons (Brigade "230 Mestre de Camp", Brigade "220 Royal Cravates", and unit "214" of Brigade "210 Colonel General") are flanked by five battalions of British infantry and Hanoverian guards (Brigade "310 Waldegrave") and artillery unit "301".

Before this cavalry charge, the Allied units "611" and "612" have missed their Fire phase against the Allied unit "214". The French player can make successively six charges and selects first the unit "222" (#1 in black circle). This French unit is helped in its charge by the unit "221" (#1b in black circle) which is on the flank of the targeted enemy and by the unit "214" (#1c in black circle) which is on the rear of the targeted enemy which is unit "315" (#6 in red circle). So, this charge is made by 3 French cavalry units, which is the maximum of units for the attacker.

The French player looks at the "Charge Opponents Ratio Table" in the "A" chart and determines the column to look at, knowing that the combat strength of the defender's unit is 7 (available on the Allied Order of Battle or on the Allied Units Data).

Then, the French Player looks at the "B" chart and determines the right line in making the sum of the 3 Attacker's combat strength which is 7>10, knowing that the strength is 3 for each of the 3 French units (for a total at 9). Then, the French Player looks at the "C" column and determines that the ratio of the charge is 100%.

The French player flips the Charge Chart and looks at the "Charge Results Table", in the 100% part of the chart. He determines the Effectiveness rating differential in subtracting the Effectiveness rating of the Allied unit "315" (= 5) to the Effectiveness rating of his French unit "222" (= 5) which gives a result of 0.

The French player rolls a "4" and, knowing there is a die roll modifier of +1 because the defender is in heather (difficult ground = -1) but defender is also charged by cavalry on a flank (= +2), he has to look the line 11 in the column 0.

The final results of the charge are "D/R" for the Allied defender and "D or R" for the French attacker.

The Allied player has to conduct an EC, the French player rolls a 5 and the Check fails (the Effectiveness rating of the Allied unit "315" = 5), the unit suffers a "R". For the French unit "222" (the one in front of the enemy), it suffers the opposite of the result of the Allied Defender, which has suffered a "R" result, and, thus, the French unit suffers a "D" result: the French player has to put the square counter of the unit in Line formation on the map. The multi-hex Brigade counter "220" is removed.

The French units "221" and "214", which only helped the unit "222" on its charge, are not concerned by the result.

For the Allied unit "315", as it has suffered a "R" result, it normally has to recoil 1 hex BUT given that this unit is taken from the rear by French unit "214", it is therefore Panicked. The square Panicked counter of the unit "315" is put three hexes behind the Allied Brigade counter.

After the Allied player has himself carried out one of his Charges, the French player may repeat the same Charge Routine for his 5 other units, if they can still do so following the successive reciprocal Allied Charges:

  • Unit "223" (#2 in black circle), now with its square counter on the map, can charge Allied unit "314" (#5 in red circle)
  • Unit "231" (#3 in black circle) can charge Allied unit "313" (#4 in red circle)
  • Unit "232" (#4 in black circle) can charge Allied unit "312" (#3 in red circle)
  • Unit "233" (#5 in black circle) can charge Allied unit "311" (#2 in red circle)
  • Unit "234" (#6 in black circle) can charge Allied artillery unit "301" (#1 in red circle) which, before, has missed its artillery fire.

If two Allied units more (unit "315" is Panicked) are Disorganised, the multi-hex of the Brigade "310 Waldegrave" will be removed from the map.

(H.1.12) Charge Combat Results

The Charge Results, situated at the bottom-right of the "Charge Results Table" dictates the effects of Charges. These effects include:

(H.1.12.1) Effectiveness Check (EC)

An EC has to be done for the unit. If the Check is successful, it is unaffected.

If the Check fails, it suffers a Disorganisation and a new counter must be placed on the map (any artillery unit is destroyed: the counter is removed).

See Rule 6.0 for more explanation about the Effects of a Disorganisation.

(H.1.12.2) Disorganisation (D)

The unit automatically suffers a Disorganisation and the present unit's counter on the map must be replaced by a new counter (any artillery unit is destroyed: the counter is removed).

(H.1.12.3) Disorganisation or Recoil for the Defender (D/R)

An EC has to be done for the unit of the defender. If the Check is successful, it suffers a Disorganisation and the present unit's counter on the map must be replaced by a new counter (any artillery unit is destroyed: the counter is removed). If the Check fails, it must Recoil 1 hex, keeping its facing.

(H.1.12.4) Either Disorganisation or Recoil for the Attacker (D or R)

The attacker has to apply the opposite of the result of the EC done for the defender. If the defender's unit suffers a Disorganisation, the attacker's unit must Recoil 1 hex, keeping its facing. If the defender's unit Recoils 1 hex, the attacker's unit suffers a Disorganisation and the present unit's counter on the map must be replaced by a new counter.

(H.1.12.5) Recoil (R)

The unit has to Recoil 1 hex, keeping its facing.

Generalities on Recoil (valid for any Recoil): at owner player's choice, a Recoil can be made to any hex that leads the recoiling unit (in order of priority):

  1. away from the charging or firing unit or
  2. away from the nearest enemy unit or
  3. adjacent to an enemy unit.

A Recoil cannot be made into or across Prohibited terrain.

(H.1.12.6) Either Recoil or Disorganisation Plus Recoil for the Defender (R/DR)

An EC has to be done for the unit of the defender. If the Check is successful, it has to Recoil 1 hex, keeping its facing. If the Check fails, it suffers a Disorganisation and must Recoil 1 hex, keeping its facing. The present unit's counter on the map must be replaced by a new counter (any artillery unit is destroyed: the counter is removed).

(H.1.12.7) Disorganisation Plus Recoil for the Defender (DR)

The unit of the defender automatically suffers a Disorganisation and must Recoil 1 hex, keeping its facing. The present unit's counter on the map must be replaced by a new counter (any artillery unit is destroyed: the counter is removed).

Design Note: When a unit is part of a Brigade and its square counter is not present, any result "R" = Recoil is in fact synonymous with result "DR" = Disorganisation + Recoil.

(H.1.12.8) Panic (P)

The unit of the defender is automatically Panicked and the Panicked counter of the defender's unit must be placed on the map, replacing the present counter (any artillery unit is destroyed: the counter is removed).

The unit must recoil 2 hexes and must perform a Rout during the next Rout Phase of this turn.

Special results for "P" Panicked units are indicated in the "Charge Results Table": they replace the above results.

(H.1.13) Summary for Recoils

There is no difference between the Fire results and the Charge results: the "EC", "D", and "P" results are similar in both tables. Their resolution is also similar.

(H.1.13.1) Recoil after any result "R" = Recoil
  • Any unit which is in Brigade formation, Well Formed or "S" Shaken will recoil 1 hex.
  • Any "P" Panicked unit will recoil 2 hexes.
(H.1.13.2) Recoil after (a) failing an EC or (b) any result "D" = Disorganisation
  • Any unit which is in Brigade formation, Well Formed or "S" Shaken will disorganize without recoil.
  • Any "P" Panicked unit will recoil 2 hexes.
(H.1.13.3) Recoil after any result "DR" = Disorganisation + Recoil
  • Any unit which is in Brigade formation, Well Formed or "S" Shaken will disorganize and recoil 1 hex.
  • Any "P" Panicked unit will recoil 2 hexes.
(H.1.13.1) Recoil after any result "P" = Panic

(The source prints this sub-heading with the number H.1.13.1 a second time; it is transcribed as printed.)

  • Any unit which is in Brigade formation, Well Formed or "S" Shaken will panic and recoil 2 hexes.
  • Any "P" Panicked unit will recoil 3 hexes.

(H.1.14) Attacker Option to Advance

If the defender has to recoil, the attacker may (it's not mandatory) occupy with one or two of his charging units the defender's vacated hex, if this one is completely empty. At the same time, he may change the facing of all the charging units, in order to face the enemy.

(H.1.15) Additional Recoil Effects

  • When a unit recoils, it can be stacked with a friendly unit if the stacking limits are not exceeded (see 5.0).
  • If a Panicked unit is going to be stacked with a friendly unit during its recoil, an EC has to be done for this friendly unit. If the Check is successful, it is unaffected. If the Check fails, it suffers a Disorganisation and a new counter must be placed on the map.
  • In the event of a unit not Panicked and not able to recoil because of prohibited terrains (River, Lake, etc..) or stacking limits, the recoiling unit is disorganised. If the unit is Panicked, the unit is captured and removed from play.
  • If a unit is not able to recoil because of enemy units, the unit is captured and removed from play.
  • In the event of a recoil of All the opponents of a Brigade, this Brigade must occupy the defender's vacated hexes and change its order in Attack.

Important notes on Recoils after a Charge only:

  • Any recoiling infantry unit in Line, which has a friendly or enemy unit (leaders are not affected) in one of its directly adjacent recoil hexes, automatically becomes Panicked and must then recoil 3 hexes. If this infantry unit in Line has only one possible hex into which it could recoil (one hex distance), it can recoil via the empty hex.

Design Note: It is therefore definitely more secure for a player to let a space of minimum 1 hex between the different lines of the army and to protect the rear of these lines. Tactical manuals of the time prescribed that the different lines should position themselves within musket range of each other: this was to avoid hindering a potential withdrawal or retreat, but also to prevent through firing, as much as possible, any attack from the rear. This recoil of 3 hexes simulates the panic caused by failing to follow this tactic.

H.2 Enemy's Cavalry Reaction Charge

(H.2.1) In General

Only cavalry units may make Reaction charges and these Reaction charges can occur only during the movement phase, not during the Charge phase.

The Reaction Charge can be made even if the concerned cavalry units have been already previously moved this turn. The Reaction Charge is not considered as a movement (and it's why it's explained in this Charge Procedure).

However, any cavalry unit involved into a Reaction-Charge cannot move again during this turn even if its "Corps" has not been yet selected.

(H.2.2) Trigger – Moving into Enemy ZOI

During the Movement phase, when a player is moving his units into the ZOI (see 4.0) of enemy's cavalry units, the enemy player can announce a cavalry Reaction Charge.

Remember that the ZOI is the zone from the two hexes in front of the hex the cavalry unit occupies to all the hexes which are at the maximum Movement allowance depending of the category of the concerned cavalry unit (heavy and light cavalry generally do not have the same Movement allowance) and if the LOS is not blocked.

Important to remember: the determination of the ZOI depends on the movement points, not on a range of hexes: some terrains could decrease or even block the length of the zone (see the Terrain Effects Table).

(H.2.3) Requirements to Reaction Charge

To be available for a cavalry Reaction Charge, cavalry units must:

  • be in Line (see 4.2).
  • have an "Attack" order.
  • conduct a successful Task Check.

(H.2.4) Reaction Charge Procedure

(H.2.4.1) Announcement of Planned Movement into Enemy ZOI

If, at the start of his movement, the player plans to bring one of his units into the ZOI of an enemy cavalry unit in Line formation, he must ask the enemy player if he wishes to carry out a Reaction Charge.

Remember the enemy cavalry units of the enemy player must have an "Attack" order and conduct a successful Task Check.

(H.2.4.2) Enemy Commitment to Reaction Charge

If this is the case, the player must indicate what movements he had planned for his unit(s) and the enemy player must indicate which unit is targeted and in which hex he intends to carry out this Reaction Charge.

(H.2.4.3) Movement to the Point of Intercept

The player then places the targeted unit (square counter or Brigade counter) in the indicated hex. The player must count the number of movement points spent by the targeted unit to move to the indicated hex: ALL other selected units (from a "Corps" or a Line/Wing) cannot be moved by more than this number of movement points. The player now moves ALL his units.

(H.2.4.4) Displacement of Reaction Charging Units

Then, the enemy player selects a maximum of three units from his available cavalry units and displaces them for the purpose of charging the targeted unit of the other player. He places the available cavalry units adjacent to the targeted unit, using the movement points of the available cavalry units to achieve that.

Perhaps the movement allowance of some units will not allow the achievement of this displacement.

(H.2.5) Reaction Counter-Charge

(H.2.5.1) Announcement of Counter-Charge at Enemy Displacement

When the enemy player announces a cavalry Reaction Charge and begins to displace his concerned cavalry units, the player may do against these units a Reaction Charge (called here "Counter-Charge"), of course if he has available cavalry units to do so.

(H.2.5.2) Resolution of Counter-Charge Movement

The procedure (including all the requirements and restrictions) is the same as the above (for the Enemy's Cavalry Reaction Charge) apart from this key modification: the cavalry units available for the Counter-Charge can use only half of their movement allowance to achieve it. The length of the ZOI is thus reduced by half in the event of a Counter-Charge.

The players will follow then the same procedure as described in the H.1 Charge Phase.

I.0 Leader Captured or Killed

I.1 During Fire Phase

At the end of any fire made by an infantry unit, if a leader is stacked with the targeted unit, the firing player has to roll the die for the leader, to see if this one is killed. If more than one leader is in the hex, the firing player has to roll for each leader individually. On a roll "6", the leader is killed.

If an artillery unit is firing at Point blank on an infantry unit, the same procedure is done. Nothing occurs if an artillery unit is firing at Medium or Maximum ranges.

If a leader is alone in a hex, or with another leader(s), and is fired upon, the procedure and conditions are the same than just above.

Note that a leader behind a unit cannot be hit by a howitzer.

I.2 During Charge Phase

During the Charge phase, if a leader is alone in a hex or stacked with a targeted unit, the charging player has to roll the die for the leader, to see if this one has to recoil, is captured or killed. If more than one leader is in the hex, the charging player has to roll for each leader individually.

  • On a roll of "1" to "4", the leader must recoil 3 hexes in the opposite direction from the enemy's charging units, and its facing at the end of the recoil is at player's choice.
  • On a roll of "5", the leader is captured and he is killed on a roll of "6" (being captured or killed in combat brings different victory points, as explained in each scenario in the Playbook).

If a leader is surrounded (if he has enemy units on 3 of its sides) and/or is not able to recoil, he is captured and removed from play.

I.3 Loss of General in Chief

If the dead or captured leader is the General in Chief, the player will have during the next turn (during the General in Chief phase) to take, as new General in Chief, the leader planned for this in the Scenario and to place it at the player's choice.

Specific repercussions of the death of the general in Chief can be included in the scenario.

I.4 Loss of Other Leader

If the dead or captured leader is not the General in Chief, the player, at the beginning of the concerned leader's phase, can replace his counter by a generic replacement leader's counter of the same or lower grade (whoever is available, as written in the scenario) and place it at the player's choice.

If no replacement leader's counter is available, the units commanded by the dead or captured leader are now without orders until the end of the game and ALL orders for these units are removed from play.

J.0 Rally Phase (reciprocal)

Units can only be rallied by their commanding leaders, according to the Order of battle.

Thus, a unit can be rallied by its "Corps" leader, by its Line/Wing leader (if any), by its Second General (if any) and by the General in Chief.

J.1 For Well Formed Units

A Well Formed unit can be rallied only if it is stacked with its Brigade counter (anywhere on this Brigade counter) and also stacked with one or more of its leaders. If so, the Well Formed unit is automatically rallied and the Well Formed unit's counter is removed.

Note that this rally is very dangerous for leaders: they could be killed or captured (see I.0).

J.2 For Shaken Units

A Shaken unit can be rallied only if it is In Command and it depends of the position of the leaders:

  • If the Shaken unit is stacked with one or more of its leaders, the unit is automatically rallied and the Shaken unit's counter is replaced by its Well Formed counter.
  • If the Shaken unit is not stacked with one or more of its leaders but the unit is In Command, a Task Check has to be done: if the Check is successful, the unit is rallied and the Shaken unit's counter is replaced by the Well Formed unit's counter, whose facing may be freely chosen by the owning player.

For the Task Check, the Effectiveness rating of a leader (see 2.5) can be used instead of the rating of the unit, if the leader is at six hexes or less of the unit.

Reminder: Independent units are always In Command.

If the Check fails, the unit stays Shaken.

J.3 For Panicked Units

A Panicked unit can be rallied only if it is stacked with one or more of its leaders. If so, a Task Check has to be done: if the Check is successful, the unit is rallied and the Panicked unit's counter is flipped to show its Shaken side.

For the Task Check, the Effectiveness rating of the leader (see 2.5) can be used instead of the rating of the unit.

Panicked Independent units can only be rallied by Generals.

If the Check fails, the unit stays Panicked.

K.0 Rout Phase (reciprocal)

All units still Panicked after the Rally Phase must rout.

K.1 Rout Movement

To rout, Panicked units must move to exit the map as quickly as possible by the retreat route designated in the scenario. The unit must spend all movement points it has in "A" formation (see the Terrain Effects Table) or as a light infantry for units in Dispersed formation.

A Panicked unit cannot rout into a hex away from the map edge of the retreat route: instead the unit must stop its rout (and perhaps stay put).

K.2 Stacking during Rout

Two routing units, even not of the same type, may end their rout stacked in the same hex: this is one way to make it easier to rally these units during next turn.

However, during the Rout phase of this next turn, if the stacked units are of different types, still stacked together and still Panicked, they must unstack. If unable to unstack, the player must choose a unit which will be considered as captured and removed from play.

K.3 Rout through Friendly Units

A unit may rout into or through hexes occupied by other friendly units thereby immediately disordering those units (see 6.3: "Effects of a Disorganisation"). If those units become Panicked, they must recoil 3 hexes but they do not rout this turn.

K.4 Rout into Enemy-Occupied Hexes

Routing units may never enter enemy-occupied hexes. If a routing unit has enemy units on 3 of its sides, the unit, considered as surrounded, is automatically captured and removed from play.

L.0 Reorganisation of the Army (reciprocal)

L.1 Reorganisation of the Lines

(L.1.1) In General

Each side may reorganise the troops of its army in moving or re-facing any Brigade, Unit or leader counters. These reorganisation and re-facing "movements" are regardless of Formations and Orders.

The goal of this reorganisation is to well form lines and Brigades, for the units to be well contiguous and facing the same direction.

Important: It is not possible to reorganise Out of Command units (and therefore Panicked units as well).

(L.1.2) Movement Limits

But, for this reorganisation, a Brigade or unit counter can only be moved 1 hex back or sideways (not forward and not into Impassable or Prohibited terrain), or can be turned right or left by only 1 vertex or hexside.

Any 1 or 2 hexes brigade counter can make one backward wheel, 3 hexes brigade counter cannot make a wheel.

Leader counters can also only be moved 1 hex, in ALL directions (not into Impassable or Prohibited terrain).

Remember that Leaders have all-around facing (see 3.3).

L.2 Reorganisation of a Brigade

(L.2.1) In General

A Brigade is always composed of several units.

Remember that when one of these units is disorganised, its square counter is put on the multiple-hex counter (1, 2 or 3 hexes long) representing the Brigade. The unit is still Well-formed but its Effectiveness rating is minored.

If more than half the units composing the Brigade is disorganised, the multi-hex Brigade counter must be removed from the map: all units in the Brigade are considered disorganised and must be represented by their square counter only.

(L.2.2) Reorganisation Procedure

It's possible to re-introduce a long multi-hex Brigade counter on the map.

To do so, the player must leave contiguous more than half of the Well-Formed units composing the Brigade, without moving them at all and for two half hour turns. At the end of this period, the Brigade is reorganised and the multi-hex Brigade counter can be put back on the map: the Well-Formed square counters, used for the reorganisation of the Brigade, are placed on the Orders/Organisation Sheet.

But, this process is very dangerous because, if any unit that is part of this reorganisation is charged or fired on and suffers a Disorganisation (or a Panic), all units in the process are automatically Shaken (or Panicked).

It is best to perform this process away from the enemy or well protected by a wood, a village, a hill or by hard covers.

M.0 End of Turn

M.1 Reinforcements Placement

For the reinforcements, the player has, during the first turn, to follow the same procedure than described in A.2: he has to roll the die to determine the actual arrival time of the reinforcements and roll again the die to determine where exactly the reinforcements arrive.

Once this is done, the player has to place the concerned units at the right entry-point. This placement of the units must be performed the turn just before the units enter the map.

M.2 Weather Record

Look at the scenario if any turns of fog, rain, snow or night occur during the game. If so, for the concerned turns, follow the process indicated in the rule 7.0 "Bad Weather & Night".

M.3 Game Turn Record

This turn is finished.

For next turn, a player has to put the "Game Turn" counter on the right position on the Game Turn Record Track (where there is a compass) on the map. Remember that turns are half hour turns, the "T.30" side of the "Game Turn" counter must be shown every two turns.

Results Tables

Fire Combat Results Table

Transcribed from the official "SYWBS Results Tables V3" (Fire Combat Results Table). Columns A to F are the firing columns from the Relative Firepower Tables; the Die column gives the die roll for the target type.

N.B.:

  • "A" unit: Adapted unit
  • "S" unit: Shaken unit
  • "P" unit: Panicked unit

Targets, by row:

  • C (Column): Brigade in Column; Unit in Column ("A" unit on a road or on open field); Unit in Line and enfiladed (fired upon on one of its flanks); "P" unit (all "D" and "D/P" results = "P" result); Artillery limbered.
  • L (Line): Brigade in Line; Unit in Line; "S" unit (all "D" and "D/P" results = "P" result); Artillery unlimbered.
  • U (Unformed): Dispersed formation (Light infantry / Jägers / ...); "A" unit in a wood or a forest; Leader HQ; Artillery unlimbered on the edge of a forest or a wood.
  • S (Soft cover): "A" unit into a Soft cover (Village / Town / ...); Artillery unlimbered on the edge of a Soft cover.
  • H (Hard cover): Unit in Line into a Hard cover (Fortification / Redoubt / ...); "A" unit into a Hard cover (Fortification / Redoubt / ...); Artillery unlimbered in a Hard cover.
TargetDieABCDEF
C (Column)1--ECECDD
C (Column)2-ECECDDD/P
C (Column)3ECECDDD/PD/P

Fire combat results:

  • EC = Effectiveness Check (if failed, "P" unit recoils 2 hexes). Artillery ignores this result!
  • D = Disorganization ("P" unit recoils 2 hexes)
  • D/P = Make an Effectiveness Check and apply the appropriate result (D if passed, P if failed)
  • P = Panic and recoils 2 hexes ("P" unit recoils 3 hexes)

Charge Results Table

The Charge Results Table is a graphic grid in the official "SYWBS Results Tables V3" file (ratios 50%, 100%, 150%, 200%, 300%, by die roll 1 to 6, by Effectiveness rating differential from -2 to +5, Attacker and Defender columns). Its cells are not reproduced as text here. Consult the official file for the grid; the rules that apply to it are transcribed below.

How to use the Charge Results Table (see H.1.9 for the full routine):

  • The Effectiveness rating differential is the attacker's Effectiveness rating in front minus the defender's Effectiveness rating, located on the horizontal line at the top of the table.
  • Go to the row for the memorized ratio (50%, 100%, 150%, 200% or 300%) and the die roll after applying the Charge Die Roll Modifiers.
  • Die results lower than 1 are treated as 1 for the Attacker and "-" for the Defender. Die results greater than 6 are treated as "-" for the Attacker and 6 for the Defender.

Charge Die Roll Modifiers (cumulative):

  • -2 to the die roll if the defender occupies a wood hex; occupies a hard cover.
  • -1 to the die roll if the defender is at the top of a slope; is attacked across a stream, bridge or hedgerow; occupies a soft cover or a difficult ground.
  • +1 to the die roll if the attacker is at the top of a slope; is infantry and charges the defender on a flank; is infantry and charges the defender on the rear.
  • +2 to the die roll if the attacker is cavalry and charges the defender on a flank; is cavalry and charges the defender on the rear.

Charge results:

  • EC = Effectiveness Check (if failed, "P" unit recoils 2 hexes)
  • D = Disorganisation ("P" unit recoils 2 hexes)
  • D/R = Make an Effectiveness Check and apply the appropriate result (D if passed, R if failed)
  • D or R = Apply the opposite of the result of the Defender (cf. D/R just above)
  • R = Recoils 1 hex ("P" unit recoils 2 hexes)
  • R/DR = Make an Effectiveness Check and apply the appropriate result (R if passed, DR if failed)
  • DR = Disorganisation and recoils 1 hex ("P" unit recoils 2 hexes)
  • P = Panic and recoils 2 hexes ("P" unit recoils 3 hexes)

Minden 1759 Errata & Clarifications

Transcribed from the official "SYWBS-Minden-Errata & Q+A V2.0" (Adhoc-Edition, July 2024). The errata for the SYW Battles System itself are, per that document, listed in the Living SYWBS Rules V2.0 (in red in the text); they are not in this file.

Errata

See the Living SYWBS Rules V2.0 for the Errata, Fixes and Clarifications (in red in the text).

Fixes

  • On the back of the box of the English version, Soubise is announced in the preamble in italics. Of course, it is Contades and not Soubise.
  • In the French Playbook, for scenario #4 and scenario #6, the French artillery unit 104 is placed on the setup map in one of the hexes of the village of Malbergen. This unit must be placed one hex to the left, outside the village (an unlimbered artillery unit cannot be in a soft cover).

Clarifications

In the Playbooks: In some Scenarios, inside the "New Leaders" part, just following the number of the counter there are sometimes a word (: Sackville into the Allied playbook, infantry, cavalry, Saxon into the French playbook). This indicates that these new leaders could replace only Sackville or only infantry leaders, or only cavalry leaders or only Saxon leaders.

Questions and Answers

Question 1) Penthievre brigade counter. I cannot spot this counter, is it missing or (horror) have I lost it on the floor!

Answer: It is not on countersheet #3 but on countersheet #4, near the Leaders counters, at the left of Chevalier Nicolai. It's a brigade at 2 regiments only and so it's not a long counter but a square counter.

Question 2) A square counter unit 478 (Saxon infantry unit) is on the French countersheets but seems to not be used in the game. Why?

Answer: This infantry counter is for the Saxon Garde zu Fuss. In total, 15 Saxon battalions were with the French army in West-Germany in 1759. We know that only 14 Saxon battalions fought at Minden. The unit not at Minden is not known but we suppose it was the Garde zu Fuss. Anyway, if you want to play with the Saxon Garde zu Fuss, you can: you've only to replace one of the Saxon unit by the unit 478. You can consider the Effectiveness rating and the Combat strength of unit 478 like those of unit 461.

Question 3) ZOI Clarification. I'm still at the rules-reading stage, so forgive me if I'm missing something obvious, but the ZOI rules seem a little strange to me. For cavalry they make sense since a ZOI represents reaction charge zone. All fine and standard. For infantry, though, I'm struggling to see a point to them. There is no mandatory combat for being in an enemy ZOI. There is no movement point cost for entering or leaving an enemy ZOI and no opportunity fire. It seems infantry can walk right across an enemy ZOI with no hindrance or penalty.

Answer: About the ZOI:

  • No real effect for artillery and infantry friendly units.
  • ZOI has an effect only for cavalry friendly units: they can do a Reaction-Charge.
  • There is an effect for enemy units in the ZOI: they cannot change formation (see 4.4).

ZOI in this system is not a ZOC (no ZOC in SYWBS system).

Question 4) What does "from the edge of soft cover" mean then?

Answer: About the artillery in soft covers: "On the edge" means adjacent. The forests and woods of the time were much wilder than our current modern forests (an artillery battery could not be deployed there). In an other hand, they were edged with thickets and large bushes for protection, but also with thick branches allowing the artillerymen to quickly assemble abbatis. The outskirts of towns or villages were made up of walled (vegetable) gardens, low walls and thick hedges: all of them a perfect protection for artillery.

Unlimbered artillery adjacent to forest or wood use the "U" table when being fired upon. Unlimbered artillery adjacent to soft cover use the "S" table when fired upon.

About the artillery in hard covers: Hard covers were emplacements especially made for the deployement of artillery: redoubts, fortifications, ramparts, etc.

  • (3.1.4) Shaken or Panicked Formations
    • (3.1.4.1) Definition & Historical Usage
    • (3.1.4.2) Methods & Restrictions
  • 3.2 Artillery
    • (3.2.1) In Unlimbered Formation
      • (3.2.1.1) Definition & Historical Usage
      • (3.2.1.2) Methods & Restrictions for Light Guns
      • (3.2.1.3) Methods & Restrictions for Heavy Guns
    • (3.2.2) In Limbered Formation
      • (3.2.2.1) Definition & Historical Usage
      • (3.2.2.2) Methods & Restrictions For All Guns
  • 3.3 General in Chief, Second General, Line/Wing Leaders and "Corps" Leaders
    • (3.3.1) Definition & Historical Usage
    • (3.3.2) Methods & Restrictions for Leaders
  • 4.0 Zone of Influence (= "ZOI")
    • 4.1 For an Infantry Unit
    • 4.2 For a Cavalry Unit
    • 4.3 For an Artillery Unit
    • 4.4 Effects
  • 5.0 Stacking (placement of several units in a same hex)
    • 5.1 For Infantry
    • 5.2 For Cavalry
    • 5.3 For Artillery
    • 5.4 Limitations
    • 5.5 Alignment
  • 6.0 Effectiveness Check (= "EC") and Task Check
    • 6.1 In General
    • 6.2 Conduct EC or Task Check
      • (6.2.1) Pass
      • (6.2.2) Fail
    • 6.3 Effects of a Disorganisation
      • (6.3.1) Unit in a Brigade
      • (6.3.2) Well Formed Unit
      • (6.3.3) Shaken Unit
      • (6.3.4) Unit with Effectiveness Rating of 1
  • 7.0 Bad Weather & Night
    • 7.1 Fog
      • (7.1.1) Light Fog Effects
      • (7.1.2) Heavy Fog Effects
    • 7.2 Heavy Rain
      • (7.2.1) Heavy Rain Effects
    • 7.3 Heavy Snow
      • (7.3.1) Heavy Snow Effects
    • 7.4 Night
      • (7.4.1) Light Night Effects
      • (7.4.2) Dark Night Effects
  • C.1 For the General in Chief of the Player who has the Initiative for this Turn
    • (C.1.1) Movement of the General in Chief
      • (C.1.1.1) In General
      • (C.1.1.2) Purpose
      • (C.1.1.3) Movement Procedure
      • (C.1.1.4) Road March Bonuses
      • (C.1.1.5) Summary of Movement Allowances
    • (C.1.2) Issue New Orders (each 1st half hour turn only)
      • (C.1.2.1) In General
      • (C.1.2.2) Organisational Scope of Orders
      • (C.1.2.3) Order Placement
      • (C.1.2.4) New Orders
      • (C.1.2.5) The Orders
      • (C.1.2.6) New Order Placement Procedure
      • (C.1.2.7) Delivery Lag Time
    • (C.1.3) Advance Existing Orders (each 1st half hour turn only)
  • C.2 For the General in Chief of the Player who does not have the Initiative for this Turn
  • D.0 Phase of the Second Generals
    • D.1 For the Second General of the Player who has the Initiative for this Turn
      • (D.1.1) Movement of the Second General
        • (D.1.1.1) In General
        • (D.1.1.2) Purpose
        • (D.1.1.3) Movement Procedure
      • (D.1.2) Issue New Orders (each 1st half hour turn only)
      • (D.1.3) Advance Existing Orders (each 1st half hour turn only)
    • D.2 For the Second General of the Player who does not have the Initiative for this Turn
  • (E.1.3) Selection of a Wing of Brigades from Several "Corps" of Cavalry
    • (E.1.3.1) In General
    • (E.1.3.2) Requirements
    • (E.1.3.3) Formation Details
    • (E.1.3.4) Extended Example of Wing
      • (E.1.3.5) Differences between Large Formation Types
  • (E.1.4) Movement of the Line/Wing Leader (if any) or the "Corps" Leader
    • (E.1.4.1) In General
    • (E.1.4.2) Purpose
  • (E.1.5) Out Of Command Check
    • (E.1.5.1) In General
    • (E.1.5.2) Command Range- Generals in Chief
    • (E.1.5.3) Command Range- Second Generals
    • (E.1.5.4) Command Range- Other Leaders
    • (E.1.5.5) Exceptions
    • (E.1.5.6) Out Of Command Effects - Leaders
    • (E.1.5.7) Out Of Command Effects – Brigades & Units
    • (E.1.5.8) Out Of Command Effects – Panicked Units
  • (E.1.6) Ignore an Order
    • (E.1.6.1) Attempt To Ignore An Order
    • (E.16.2) Attempt Of Action Despite The Absence of Orders
  • (E.1.7) Requirements for Movement of the Units of Line/Wing or "Corps"
    • (E.1.7.1) Which Units Can Move
    • (E.1.7.2) Primary Moving Entity is Square Counter
    • (E.1.7.3) Movement Allowance
    • (E.1.7.4) Change of Facing
    • (E.1.7.5) Light Units
    • (E.1.7.6) Detaching Units from a Brigade
    • (E.1.7.7) Movement of a Large Line/Wing
    • (E.1.7.8) Movement of a Small Line
  • (E.1.8) Movement of a Brigade with a Multi-Hex Counter
    • (E.1.8.1) Movement on a Road of a Brigade in Column
    • (E.1.8.2) Movement of a Brigade in Column not on a Road
    • (E.1.8.3) Road March
    • (E.1.8.4) Movement of a Brigade in Line
    • (E.1.8.5) "Wheel" Maneuver
    • (E.1.9) Transition from One Formation to Another
      • (E.1.9.1) In General
      • (E.1.9.2) Change Formation – Square Counter
      • (E.1.9.3) Change Formation – Brigades
      • (E.1.9.4) Special Deployment for 3-Hex Brigade in Column
      • (E.1.9.5) Movement Allowance Impact
  • E.2 For one Line/Wing or "Corps" Leader of the Player who does not have the initiative for this Turn
  • E.3 then E.4 then E.5, etc. For another Line/Wing or "Corps" Leader of the two Players, alternatively
  • F.0 Phase of the Brigades or Units Not Previously Activated (alternatively)
    • F.1 For the Brigades or Units of the Player who has the Initiative for this Turn
      • (F.1.1) Movement of Independent Brigades or Units
      • (F.1.2) Movement of Units from Entry Points and Movement of Reinforcements
        • (F.1.2.1) Arrival of Units per Scenario Setup
      • (F.1.2.2) Arrival of Reinforcements
      • (F.1.2.3) Arrival Movement Costs
      • (F.1.2.4) Blocked Entry Point
    • F.2 For the Brigades or Units of the Player who does not have the Initiative for this Turn
  • (G.3.1) In General
  • (G.3.2) Wood, Forest & Soft Cover
  • (G.3.3) Fire Direction & Selection
  • (G.3.4) Reciprocal Resolution
  • (G.3.5) Ranges of Fire
    • (G.3.5.1) Point Blank Range
    • (G.3.5.2) Medium Range
    • (G.3.5.3) Maximum Range
    • (G.3.5.4) Illustrative Examples
  • (G.3.6) Artillery Fire Routine
  • (G.3.7) Risk of a Leader Loss
  • (G.3.8) Fire Combat Results
    • (G.3.8.1) Effectiveness Check (EC)
    • (G.3.8.2) Disorganisation (D)
    • (G.3.8.3) Either Disorganisation or Panic (D/P)
    • (G.3.8.4) Panic (P)
  • (G.3.9) Fire on Buildings & Wooden Bridges
    • (G.3.9.1) In General
    • (G.3.9.2) Heavy Artillery Fire
    • (G.3.9.3) Howitzer Fire
  • G.4 Fire Phase for Infantry
    • (G.4.1) In General
    • (G.4.2) Fire Direction & Selection
    • (G.4.3) Reciprocal Resolution
    • (G.4.4) Infantry Fire Routine
      • (G.4.4.1) Conduct Fire Task Check
      • (G.4.4.2) Conduct Fire Combat
    • (G.4.5) Risk of Leader Loss
    • (G.4.6) Extended Fire Example
  • (H.1.8) Recoil Before Charge or After Enemy Advance
    • (H.1.8.1) Recoil Option for Defender's Cavalry
    • (H.1.8.2) Enemy Advance Forces Either Recoil or Charge
  • (H.1.9) Charge Routine
    • (H.1.9.1) Die Roll Treatment
  • (H.1.10) Risk of Leader Loss
  • (H.1.11) Extended Charge Example
  • (H.1.12) Charge Combat Results
    • (H.1.12.1) Effectiveness Check (EC)
    • (H.1.12.2) Disorganisation (D)
    • (H.1.12.3) Disorganisation or Recoil for the Defender (D/R)
    • (H.1.12.4) Either Disorganisation or Recoil for the Attacker (D or R)
    • (H.1.12.5) Recoil (R)
    • (H.1.12.6) Either Recoil or Disorganisation Plus Recoil for the Defender (R/DR)
    • (H.1.12.7) Disorganisation Plus Recoil for the Defender (DR)
    • (H.1.12.8) Panic (P)
  • (H.1.13) Summary for Recoils
    • (H.1.13.1) Recoil after any result "R" = Recoil
    • (H.1.13.2) Recoil after (a) failing an EC or (b) any result "D" = Disorganisation
    • (H.1.13.3) Recoil after any result "DR" = Disorganisation + Recoil
    • (H.1.13.1) Recoil after any result "P" = Panic
  • (H.1.14) Attacker Option to Advance
  • (H.1.15) Additional Recoil Effects
  • H.2 Enemy's Cavalry Reaction Charge
    • (H.2.1) In General
    • (H.2.2) Trigger – Moving into Enemy ZOI
    • (H.2.3) Requirements to Reaction Charge
    • (H.2.4) Reaction Charge Procedure
      • (H.2.4.1) Announcement of Planned Movement into Enemy ZOI
      • (H.2.4.2) Enemy Commitment to Reaction Charge
      • (H.2.4.3) Movement to the Point of Intercept
      • (H.2.4.4) Displacement of Reaction Charging Units
    • (H.2.5) Reaction Counter-Charge
      • (H.2.5.1) Announcement of Counter-Charge at Enemy Displacement
      • (H.2.5.2) Resolution of Counter-Charge Movement
  • I.0 Leader Captured or Killed
    • I.1 During Fire Phase
    • I.2 During Charge Phase
    • I.3 Loss of General in Chief
    • I.4 Loss of Other Leader
  • J.0 Rally Phase (reciprocal)
    • J.1 For Well Formed Units
    • J.2 For Shaken Units
    • J.3 For Panicked Units
  • K.0 Rout Phase (reciprocal)
    • K.1 Rout Movement
    • K.2 Stacking during Rout
    • K.3 Rout through Friendly Units
    • K.4 Rout into Enemy-Occupied Hexes
  • L.0 Reorganisation of the Army (reciprocal)
    • L.1 Reorganisation of the Lines
      • (L.1.1) In General
      • (L.1.2) Movement Limits
    • L.2 Reorganisation of a Brigade
      • (L.2.1) In General
      • (L.2.2) Reorganisation Procedure
  • M.0 End of Turn
    • M.1 Reinforcements Placement
    • M.2 Weather Record
    • M.3 Game Turn Record
  • C (Column)4ECDDD/PD/PP
    C (Column)5DDD/PD/PPP
    C (Column)6DDD/PPPP
    L (Line)1----ECEC
    L (Line)2---ECECD
    L (Line)3--ECECDD
    L (Line)4-ECECDDD/P
    L (Line)5ECECDDD/PD/P
    L (Line)6ECDDD/PD/PP
    U (Unformed)1-----EC
    U (Unformed)2----ECEC
    U (Unformed)3---ECECD
    U (Unformed)4--ECECDD
    U (Unformed)5-ECECDDD/P
    U (Unformed)6ECECDDD/PP
    S (Soft cover)1------
    S (Soft cover)2-----EC
    S (Soft cover)3----ECEC
    S (Soft cover)4---ECECD
    S (Soft cover)5--ECECDD/P
    S (Soft cover)6ECECECDD/PD/P
    H (Hard cover)1------
    H (Hard cover)2------
    H (Hard cover)3-----EC
    H (Hard cover)4----ECEC
    H (Hard cover)5---ECECD
    H (Hard cover)6ECECECECDD/P