Mercurial: Challenger Expansion thumbnail

Mercurial: Challenger Expansion

Mercurial: Challenger Expansion Rulebook

Table of Contents

Table of Contents

Components

  • 2 Challenger boards (double-sided, with a different Class on each side)
  • 1 Mystcaller board (double-sided, 1 player side and 1 Challenger side)

Playing with Challengers: Standard Play

Set up

  1. Perform the same setup as you would in the standard game (pages 4 & 5 of the base game rulebook), up to the step where players choose their Class.
  2. After players have chosen their Classes and taken their starting resources, decide how many Challengers you'll be playing against and what their Classes will be. There should be no repeated Classes between players and Challengers. Each Challenger board shows its relative difficulty to play against, between 1 and 3 stars, with 3 stars being the most difficult. Lay out the Challenger boards on the side with their chosen Classes, then give the Challengers their starting dice, Mana, and Acuity. As Challengers do not use Alterations, they do not collect any Starter, Class or Artifact Alterations.
  3. Continue the rest of standard setup. The players may choose any turn order for both themselves and the Challengers. Once set, this turn order does not change. Give each player or Challenger bonus Acuity based on the chosen turn order as normal.

All players must then roll all their dice in their dice pool, and those of the Challengers, to determine everyone's starting elements. You are now ready to begin!

Gameplay Overview

When it's the Challenger's turn, they will always take one of two series of actions based on the number of unallocated dice they have. These actions can be found on the top-right side of the Challenger boards. The first series of actions is chosen when they have 0-1 unallocated dice, while the second is chosen when they have 2 or more unallocated dice.

Explanation of Actions

(Enchanter example, each Challenger board is different)

If the Challenger has 0-1 unallocated dice:

  • A: The Challenger Casts their Spell combination, with the following powers added when calculating their Ruin/Restore totals:
    • B: All Ruin is converted to Restore.
    • C: 5 Restore is added.

If the Challenger has 2-6 unallocated dice:

  • D: Using their available dice, Mana, and Acuity, the Challenger attempts to take a Spell with the following priorities:
    • E: Primary priority: Spells are Fire-based.
    • F: Secondary priority: The leftmost Spell.
    • G: If the Challenger cannot take a Spell (usually due to lack of resources or requisite Elements), they instead take the 2 leftmost Alterations and 2 Acuity.
  • H: After taking either one of the Take actions above, the Challenger rerolls all dice that aren't Void (all Void are kept).

Taking a Spell

Void counts for everything: The Challengers consider the Void Element to be wild. When taking spells they may use the Void Element to take the place of any other Element.

When the Challenger is taking a Spell, they choose a Spell based on the following priorities:

  1. Spells they have resources for: The Challenger first sees what Spell they can take with their resources (Elemental dice, Mana, and Acuity). Spells that they cannot take are removed from consideration. If the result is that there is only 1 qualifying Spell, the Challenger takes it.
  2. Primary priority: If there are instead multiple qualifying Spells, the Challenger then filters out those Spells that do not fit with their primary priority. If the result is that there is only 1 qualifying Spell, the Challenger takes it.
  3. Secondary priority: If, once again, there are multiple qualifying Spells, the Challenger filters out those Spells based on their secondary priority, resulting in 1 qualifying Spell that the Challenger takes.

Example: The Chaosmancer has Water Spells as its primary priority, and the leftmost Spell as its secondary priority. During its turn, the Chaosmancer has enough resources to take 3 out of the 6 revealed Spell cards (2 Water and 1 Fire). After filtering out Spells based on the Chaosmancer's primary priority, only 2 Spells are left (2 Water). The Chaosmancer then takes the leftmost of the 2 Spells.

Acuity overflow: In the rare event that the Challenger has 10 Acuity and is still unable to take a Spell, they will take the leftmost Spell for free, discard 5 Acuity, and then immediately Cast within the same turn.

Resource allocation priorities: When allocating resources to a Spell, the Challenger first takes advantage of any applicable Mana and Acuity discount. Then, they use their resources with the following priorities: their available Mana first, Elemental dice that match the Spell's dice slot Elements second, Void Element third, and Acuity last.

Example: The Arcanist has decided to take a Fire Spell that has 1 Fixed Fire slot, and 2 Flex Fire slot. They have 2 Fire dice, 1 Void die, 4 Mana, and 3 Acuity available. Based on the resource allocation priorities, they then allocate 4 Mana and 1 Fire die to the Spell when taking it.

If the Challenger cannot take any Spell at all, they will instead perform the second Take action, which is to take a number of Alterations and Acuity.

Taking Alterations

When the Challenger takes any number of Alterations, they always take the leftmost ones. Like a normal player, the Challenger will also acquire any Acuity crystals that were on the cards.

Elemental Dice Conversions

After performing either Take action, the Challenger will perform its dice conversion, which is to reroll all their unallocated dice that are not Void. If all unallocated dice are already Void, then no dice are rerolled.

Casting

When a Challenger starts their turn with 0 or 1 unallocated dice, they will Cast their Spell combination to acquire objectives. Unlike normal players, unallocated dice do not contribute Ruin or Restore to the Challenger's Casting.

Example: When Casting, the Arcanist converts all Ruin to Restore and has an Aether Element active.

All Challengers have special abilities as listed that must be accounted for when calculating their Ruin/Restore totals. They will also attempt to craft a Spell combination that would achieve the highest amount of Ruin or Restore. As an example, if a Challenger has a Linked Spell with a multiplier, they link it with the strongest normal Spell in their Spell combination in order to gain the highest possible amount of Ruin or Restore.

A Challenger's Casting process is similar to that of a player's, with the following priorities in mind:

  1. The Challenger will first acquire the highest scoring Heroic it can.
  2. The Challenger will then collect any Prestige with leftover Ruin and Restore, then check to see if they qualify to take an Arcana.

If the Challenger cannot acquire any Heroic cards, they will Cast just to collect Prestige instead.

Difficulty Levels

The Challengers themselves have different difficulty levels, but if you'd like to adjust the difficulty, you can do so in the following ways:

  • If the game is too easy, give Challengers 1 or more extra Mana during setup.
  • If the game is too difficult, remove 1 or more Mana from Challengers during setup.

Playing with Challengers: Co-op Mode

In this co-op mode, you and a partner (2 players) will compete against 2 AI-controlled Challengers as you vie for Alterations, Spells, and Heroics across the Valanyric frontier.

The functionality of Alteration cards has been expanded, allowing you and your partner to manipulate each other's Elemental dice and to give each other Acuity. Coordinate with your partner to help craft the perfect Spell combinations, while working together to foil the plans of the Challengers!

Set up

To play a game of 2-player co-op against Challengers, perform the same setup as you would at the start of this rulebook, with you and your partner choosing your Classes, and the Classes of your 2 Challenger opponents. Then, before deciding turn order, give both Challengers one extra Mana crystal.

Continue the rest of the setup as described at the start of this rulebook by deciding turn order, then give each player or Challenger bonus Acuity based on the chosen turn order as normal.

All players must then roll all their dice in their dice pool, and those of the Challengers, to determine everyone's starting elements. You are now ready to begin!

Gameplay

All rules in the game remain the same, with the following additions:

  1. The secondary effects of Alteration cards now have alternate functions:
    • For Starter Alterations, their secondary effect can be used to convert any number of your Aether to your Class' Aetherflow Element like before, OR your partner's Aether to your Class' Aetherflow Element.
    • For Skill Alterations, their secondary effect can be used to reroll up to 2 unallocated dice and play 1 more Alteration like before, OR to swap up to 2 of your unallocated dice with any 2 of your partner's unallocated dice (increased to 4 for the Chaosmancer). If this alternate function is chosen, you must forgo the effect of playing 1 more Alteration.
    • For Artifact Alterations, their secondary effect is to gain an Acuity for yourself like before, OR for your partner.
  2. When one player or Challenger achieves Equilibrium, both they and their partner gain any Acuity and Prestige bonus listed on the Equilibrium board, and they both share the Mystrune (either player can use it during their turn).
  3. Instead of the usual end game trigger of 3 Heroics for a 4-player game, in this mode the end of the game is triggered when any one player or Challenger acquires 4 Heroics. All other characters with any Spell cards active must Cast them (in turn order) and acquire whatever objectives they can, and then the game ends. You and your partner will then calculate your individual scores and add them together for your final combined score, and then do the same thing for both Challengers. To win the game, you and your partner's combined score needs to be higher than the Challengers' combined score!

For a more difficult game, you can consider giving even more Mana to the Challengers during setup!

Bonus Class: Mystcaller

The Mystcaller's past is shrouded in mystery. All that is known of them is their affinity with the otherwise elusive magical property referred to as Myst... and that they have inhabited the lands of Valanyr longer than most.

Mystcaller for Players (Front Face)

  • A: Starts with a "Wildcard" Sigil. This counts as any 1 Sigil of the player's choice when they play Skill Alterations, and when they are counting their score at the end of the game.
  • B: Starts with 5 dice, 6 Mana, and 2 Acuity.
  • C: Starts with the 2 stated Starter Alterations, 1 Artifact Alteration chosen at random, and the Mystrune, which is taken from the Equilibrium board.
  • D: Innate Bonus: When taking Spells into your Spell Combination, you have a 1 Acuity discount. This stacks with any other Discount tokens that may apply to the Spell. If taking a Spell marked with the Mana Discount token, you gain an overall discount of 1 Mana + 1 Acuity. If the Spell is marked with an Acuity Discount token, the overall discount is 1 Mana or 2 Acuity instead.
  • E: Aetherflow Element: Fire

Mystcaller for Challengers (Back Face)

If the Challenger has 0-1 unallocated dice:

  • A: The Challenger Casts with the following powers added:
    • B: All Ruin and Restore are added, then divided by 2 to form Myst (rounded down), therefore achieving Equilibrium.

Note: Since the Challenger will always Cast with Equilibrium, they will gain the Mystrune and attempt to use it for its Casting bonus when they Cast next. Players achieving Equilibrium may take the Mystrune away from the Challenger.

If the Challenger casts and fails to achieve at least 6 Myst, their Spell combination fails, meaning that they gain no objectives and must reset their play area.

If the Challenger has 2-5 unallocated dice:

  • C: Using their available dice, Mana, and Acuity, the Challenger attempts to take a Spell with the following priority:
    • D: Primary priority: Spells are Lightning-based.
    • E: Secondary priority: The leftmost Spell.
    • F: Additionally, the Challenger has a stackable 1 Acuity Discount when taking Spells.
  • G: If the Challenger cannot take a Spell (usually due to lack of resources or requisite Elements), they instead take the leftmost Alteration and 2 Acuity.
  • H: After taking either one of the Take actions above, the Challenger rerolls all dice that aren't Void.