McBaron Bravery in the Sky
McBaron Bravery in the Sky Rulebook
Table of Contents
Table of Contents
- Introduction
- Battleground Map and Operation Tab
- Operation Tab
- The Missions
- Mission Procedure and Tolerances (Overview)
- Facing an Operation
- Performing a Mission
- Aircraft Damage
- Map Sectors (N.E. N.W. S.E. S.W.)
- Accepting or Rejecting a Mission
- Free Flights
- Flak (Anti Aircraft Artillery)
- Bombing a Flak
- Trenches (Advanced Rule)
- Lucky Strike (Advanced Rule)
- Hellish Storm (Advanced Rule)
- Taking Off From a Flak Area
- Aircraft Shot Down
- Out of or Insufficient Ammo
- Landing
- End of the Operation
- Combos and Operation Briefing
- Campaign Mode: Operation "All-In"
- "Face to Face" 1vs1 Mode
- Fight (Shooting at the Opponent's Aircraft)
- "Compass" Mode and "Blind" Mode
- Measuring Accuracy
- Recruit Training
Introduction
In McBaron you will fly your fighter aircraft over the battlefield, completing as many missions as you can in order to earn as many Bravery points as possible.
You will have to carefully plan your actions, face the enemy's anti-aircraft fire, take risks, and manage your resources as efficiently as possible.
During each game turn, you will move (fly), indicating the position of your plane with a small pencil dot from time to time (by eye), and checking (using the ruler) the outcome of your missions.
The more precise you are, the more targets you will be able to strike and destroy earning Bravery and Bonus points; mistakes, blunders, and anti-aircraft shots will cost you Malus points (negative points to be deducted).
You will be able to fly over different battlefields and carry out multiple Operations, each of which will always consist of new missions, demonstrating your bravery in the sky!
Let's fly.
Battleground Map and Operation Tab
Battleground Map
The battleground map consists of 10 types of zones; 5 Sea zones "s" and 5 Ground zones "g".
The zones are numbered from 0 to 4 in decreasing order of size/amplitude.
Sea zones: s0, s1, s2, s3, s4
Ground zones: g0, g1, g2, g3, g4
In the black and white version maps, the S (sea) zones start with the dashed line dividing the S0 and G0 zones; the G (ground) zones, after the G0 zone, are all delimited by solid dark gray outline.
The Four Sectors
The map is divided into four sectors: northwest, northeast, southwest, southeast.
Flak Areas
There are varying numbers of anti-aircraft areas (Flak areas) on each map.
Operation Tab
The "Operation Tab" is divided into two horizontal sections; the upper section is dedicated to missions, and the lower section is dedicated to resources and Operation bonuses.
The operation sheet's upper section holds twelve mission tabs, numbered 1 to 12 in two rows of six. The mission tabs as printed on the operation sheet are:
- Top row: Tank 12(g4), Submarine 11(s4), Convoy 10(g2), Airship 9(g4), Battleship 8(s0), Convoy 12(g0).
- Bottom row: Submarine 9(s3), Convoy 10(g3), Tank 8(g1), Battleship 10(s1), Aircraft 11(s3), Battleship 12(s2).
Each mission tab shows an "H" box and a "D" box, a Bravery line, and a sector compass (NW, NE, SW, SE). The Accomplished Missions Map is at the right of the upper section, with a BRAVERY track of seven stars.
The lower section of the Operation Tab holds:
- Damage track (Damage -1 each), with an Aircraft Malus box.
- Free Flights + Landing track, numbered 12, 11, 10, 9, 8, with a Free Flights/Landing Bonus/Malus row and a Saved Free Flights row (+3 each after landing).
- Ammo track.
- Bombs track: Bombs Malus (-5 each) and Flak Bonus (+2 each).
- For 1vs1 mode only: Agreement and Fight tracks.
- Combos:
- D/H + Convoy x3 = +10
- D + Convoy x2 + H + Tank x1 = +12
- D + Aircraft x2 + D + Airship x1 = +18
- D + Submarine x2 + D + Battleship x2 = +30
- Briefing targets (Operation bonuses):
- Max 10 Damage: ±10
- 5 Targets D or H inside Flak areas: ±15
- All Sea Targets D or H: ±17
- 2 Targets D in the same sector: ±13
The Missions
Missions are the heart of the game, representing both flights (movements) and targets.
Performing a mission means marking (by eye and, therefore, without the help of a ruler), the new position (dot on the map) of your aircraft, respecting the zone and bringing the mission distance as close as possible in order to destroy or hit the mission target.
Each mission tab specifies:
- Target (eg: Tank)
- Distance (eg: 12)
- Zone (eg: g4)
so... Mission: Tank-12 (g4)
Mission Coefficient and Bravery Points
Each mission has a Mission Coefficient (MC) which simultaneously indicates:
- Mission tolerance, (margin of error in millimeters, downward or upward, allowed in the positioning).
- Bravery points available.
The MC (Mission Coefficient) is the sum of the distance value and zone number; a Tank 12(g4) mission has an MC of 16 (12+4); the position of the target (Tank) must be indicated by eye (marked) with a tolerance (maximum error) of 16mm (downward or upward), and there are 16 Bravery pts up for grabs.
Mission Outcome (Overview)
Each mission can have the following outcomes:
- Accomplished: You complete the mission with the target Destroyed or Hit and receive Bravery points. That is, you have indicated a position within the mission tolerance, and you can shoot.
- Failed: You fail the mission and receive a penalty. That is, you have indicated a position that is outside the mission tolerance, and you are unable to shoot.
- Aborted: You give up the mission and suffer a penalty. That is, you have indicated a position within the mission tolerance, but you decide not to shoot.
- Not Performed: You do not face the mission and suffer a penalty. That is, you didn't even try to tackle the mission before returning to base (landing).
Mission Procedure and Tolerances (Overview)
Procedure
- You accept (or choose, if you have the option) the mission by writing your next movement's initials in the space provided.
- You mark by eye your new position with a small pencil dot, at a point of your choice on the map, respecting the Mission Zone, and write the movement's initials next to it.
- You check (with the ruler) the distance traveled to get the outcome of the mission.
Tolerances
- If the distance traveled is within 5mm of the mission distance (downward or upward), you shoot (cancel) one bullet for each millimeter of error, and you can choose:
- A) The Target is Destroyed and you gain Full Bravery, but the enemy returns fire, and you must roll the die to determine damage.
- B) The Target is Hit and you gain a minor Bravery, but the enemy does not return fire (you don't have to roll the die).
- If you are more than 5mm but within the mission tolerance (downward or upward), you can:
- A) Shoot (cancel) as many bullets (Ammo) as there is mm of error compared to the mission distance and the Target is Hit.
- B) Give up by reporting the mission Aborted (thus saving Ammo).
- If you are out of mission tolerance (downward or upward), the mission is declared Failed.
Facing an Operation
Take Off Point and First Mission
- Close your eyes and mark a random dot on the map with a pencil: this will be your take-off and landing point.
- Draw a little circle around the dot and write your initial followed by "0": for example, A0.
- Roll the die (d6) and, based on the outcome, pick on the "Operation tab" the vertical column (among the 6 available) of two missions from which to choose your first mission.
- Observe your position on the map and choose the mission you agree to perform.
- Write the acronym of your next position, A1, in the space provided on the Mission Tab.
Your operation may begin, and you are ready to carry out your first mission...
Performing a Mission
Let's assume that we are faced with the following mission:
Tank 12 (g4) = mission tolerance 16mm and therefore 16 Bravery points up for grabs (12+4).
Locate (choose) the area (g4) and mark (by eye) your new position with a pencil dot, trying to make a flight (displacement) of 12cm.
Once you have marked the new position of your aircraft, check the outcome of the mission by measuring the distance between the starting point (A0) and the arrival point (A1).
Mission Outcome
Accomplished (Destroyed or Hit), Aborted, Failed
Option 1 (Mission Accomplished)
You arrive within 5mm of the mission distance (downward or upward).
(Example) You arrive at 3mm from the target (you have traveled 11.7cm or 12.3cm, thus within the 5mm tolerance from the 12cm target) and the Tank can be Destroyed or Hit; you cancel 3 Ammo (1 Ammo for every millimeter of error from the target) ...and choose whether to declare the Tank Destroyed or Hit:
- A) You declare the Tank Destroyed, achieve Full Bravery=16 (the mission is Accomplished), but the enemy shoots back; if rolling the die, the result is 1-2 or 3 (i.e., between 1 and the distance you arrived from the Target, in this case 3mm) you suffer damage equal to the result of the roll. Declared Target Destroyed by earning Full Bravery 16 but... you received 2 damage and spent 3 bullets. You mark, by a dot on the mission map, the sector where you carried out the mission, i.e. North-East.
- B) You declare Tank Hit (mission is Accomplished), conquering Bravery 13 (16mm-3mm=13) and the enemy does not return fire. Declared Target Hit. You gain Bravery 13 avoiding enemy fire (0 damage), still using 3 bullets. You mark, by a dot on the mission map, the sector where you carried out the mission, i.e. North-East.
Option 2 (Mission Accomplished or Aborted)
You arrive at the target more than 5mm away but within the mission tolerance (downward or upward).
(Example) You arrive, downward or upward, at 12mm from the Target (you have traveled 10.8cm or 13.2cm therefore still within the 16mm mission tolerance compared to the 12cm target) and you can choose whether:
- A) Shoot (cancel) 12 Ammo; the Tank is Hit (mission is Accomplished) and you achieve Bravery 4 (16mm-12mm=4). You decide to use 12 Ammo to hit the Target (Hit) and get Bravery 4 avoiding enemy fire (0 damage). You mark, by a dot on the mission map, the sector where you carried out the mission, i.e. North-East.
- B) Do not shoot (saving Ammo) but the mission is Aborted, and you suffer Dishonor (Bravery Malus) = -4 (12mm-16mm=-4). You choose to save the 12 Ammo, Bravery Malus -4 and the mission is Aborted.
Option 3 (Mission Failed)
You arrive (downward or upward) outside the mission tolerance. You get to 17mm or more (thus exceeding the mission tolerance, in this case 16mm), the mission fails, and you suffer a Full Dishonor (Bravery Malus) = -16.
The mission is Failed! Bravery Malus -16, you take no damage or use any Ammo.
Bravery 0
(Example) If you arrive exactly at 16mm (and hence within the 16mm mission tolerance) you can choose whether:
- A) Shoot (cancel) 16 Ammo and the Tank is Hit! but you achieve Bravery 0 (16mm-16mm=0).
- B) Do not shoot (saving bullets) but the mission is Aborted, and you suffer a Bravery Malus 0 (16mm-16mm=0).
In both cases, you "conquer" Bravery 0, but with Target Hit, despite wasting bullets, you can contribute to making combos.
Aircraft Damage
The aircraft can sustain "minor" damage or "major" damage; damage sustained when crossing a Flak's center circle is always "major". If all minor damage is used up, any additional damage will be "major" damage.
Any damage to the plane results in a Malus -1; if you reach or exceed the total damage limit or the "major" damage limit, the plane is shot down, you suffer an additional Malus -10, and the operation ends.
Each Malus (negative point) will be subtracted from your final score at the end of the Operation.
Map Sectors (N.E. N.W. S.E. S.W.)
Distribution and Order of Missions
The battleground map is divided into four sectors: northwest, northeast, southwest, and southeast.
During the game, you must complete missions in each sector, and you can never complete a second mission in a sector if you have not already completed (Destroyed or Hit) at least one mission in all sectors; the same thing goes for the third mission in the same sector, which can only be completed when you have successfully performed (D or H) at least two missions in each sector.
Mark (by numbering) the missions and the sectors where they were carried out on the map of Accomplished missions.
In the example above, the second mission in the Northwest sector (5) is legal because a mission in all sectors of the battlefield was previously completed.
Accepting or Rejecting a Mission
A die roll selects the vertical column of two missions (on the Operation Tab) from which to select the mission to carry out.
If you don't want to perform either mission, you can refuse them and perform a free flight.
When the die indicates a column in which a mission has already been tackled, you will be able to perform only the remaining mission, or refuse it and perform a free flight.
When the die indicates a column where both missions have already been completed, you can select a mission from among those that have yet to be faced or perform a free flight.
Free Flights
Free Flights are used ONLY for travel and landing and do not allow any tolerance.
A Free Flight must always be measured, and each millimeter (downward or upward) of error, compared to the value used, assigns a Malus point.
Free flights must be marked in the appropriate space of the Operation Tab.
You can always perform a free flight as an alternative to carrying out a mission, i.e. if you don't think you can carry out the assigned mission or missions available, you can try to better position yourself on the battleground with a Free Flight.
Example: Free Flight with a value of 11cm, actually traveled 11.8cm; penalty -8.
In the example above, the two available Missions are difficult to achieve, therefore the A2 location is reached with an 11cm Free Flight, but the actual distance traveled is 11.8 cm, resulting in a Malus = -8.
After a free flight, you must always roll the die to make a new mission assignment.
If the operation finishes with a landing at the base, each unused Free Flight at the end of the Operation provides a +3 bonus.
Flak (Anti Aircraft Artillery)
Flak is represented by circular areas on the Battleground Map. "Crossing" these areas with your aircraft exposes it to enemy fire and, as a result, potential damage.
Flak: Risks and Damage
When your aircraft crosses a Flak area, you take the chance of being hit by flak and, BEFORE verifying the mission's outcome, you must roll the die to determine any potential damage.
If you cross a Flak area:
- Through only the outermost dashed circle of the Flak, roll the die: 1-2 = 1 damage (from 3 to 6 you are safe).
- Through the outermost dashed circle and also the inner dashed circle, roll the die: 1-2-3 = 1 damage (from 4 to 6 you are safe).
- Through the center circle: either you accept 1 "major" damage or you risk by rolling the die: 1-2-3 you suffer 1, 2 or 3 "major" damage (from 4 to 6 you are safe).
To fly from A1 to A2 you cross the inner dashed circle of a Flak and roll the die; on a roll of 3 you take 1 damage.
To fly from A1 to A2 you cross the inner dashed circle and the center circle so must roll two dice; with the first roll, you roll 4 and pass unharmed. In the second roll you roll 2 and suffer 2 "major" damage.
Bombing a Flak
You can bomb a Flak using bombs.
When you accept a mission and fly (marking your new position) through a Flak area; BEFORE checking the outcome of the mission, you can choose whether to:
- A) Bombard the Flak.
- B) Allow yourself to get shot by Flak.
A) If you opt to bomb the Flak, you must cancel a bomb and mark a dot inside the Flak's center circle, noting (next to the dot) the distance between the dot and the position at which you will begin this movement.
The Flak can only be bombed starting from a minimum distance of 6cm and results "hit" with a maximum tolerance of 5mm (downward or upward).
Once you've written the distance (which must be given in whole centimeters, not mm), use the ruler to check the result.
In the example above, you have stated that the Flak is at 8cm, thus respecting the minimum distance of 6cm. If the distance results between 7.5cm and 8.5cm, the Flak is "Hit". If the distance results less than 7.5cm or greater than 8.5cm, the bombing has failed.
- A1) If you hit the Flak (your guess is within tolerance), you can choose whether to:
- Destroy it: draw a cross in the center of the Flak and it will no longer be active.
- Damage it: you earn 2 bonus points, but the Flak remains active and shoots you (you check the outcome with the die roll).
- A2) If you miss the bombing, you receive a Malus -5 (wasted bomb) and the Flak shoots you (you check the result by rolling the die).
B) If you allow yourself to be fired upon by Flak (and so do not or cannot bomb it), check the outcome by rolling the die.
The mission's outcome is always verified only once the conflict with the Flak is resolved.
IMPORTANT: When in doubt, check if you are crossing the Flak area using the pencil (not the ruler) so you don't get a hint as to how far the flak is if you wish to bomb it.
Inside a Flak Area
It is possible to end a Flight (both free flight and mission flight) within a Flak area.
When this happens, however, you cannot bomb the Flak, and your risk doubles; the flak will shoot you twice, once when you arrive in the Flak area and again when you leave it.
The flight ends inside a Flak Area and the Flak will fire you twice.
Trenches (Advanced Rule)
The printed index calls this section "Trincee" (Italian); the page heading reads "Trenches".
Trenches are both an opportunity and a risk.
They consist of two or more "trench lines" characterized by 1, 2, or 3 perpendicular dashes indicating the value of each trench line.
When executing a Mission flight (not a Free Flight), if your aircraft's trajectory intersects one or more trench lines, you have the following options:
- A) Pass without engaging the Trench.
- B) Engage the Trench.
If you choose (A) to pass without engaging the Trench, your game turn continues normally.
If you choose (B) to engage the Trench, you earn Bravery points corresponding to the crossed Trench Line value, but the enemy fires from the Trench, and you must roll the die to determine any damage suffered.
If the result of the die roll falls within the value of the crossed Trench Line, you always suffer at least 1 major damage in addition to any minor damage.
Crossing a trench line of value 1 earns +1 Bravery point; value 2 earns +2 Bravery points; value 3 earns +3 Bravery points.
Trench line value 1:
- 1: 1 Major damage
- 2-6: No damage
Trench line value 2:
- 1: 1 Major damage
- 2: 1 Major damage + 1 Minor damage
- 3-6: No damage
Trench line value 2: (printed as "value 2" under the third panel, which is captioned +3 Bravery point and shows a three-outcome table; this looks like a printing error for value 3. Transcribed as printed.)
- 1: 1 Major damage
- 2: 1 Major damage + 1 Minor damage
- 3: 1 Major damage + 2 Minor damage
- 4-6: No damage
Crossing Multiple Trench Lines
It is possible to engage more than one trench line: the conflicts (die rolls) will be handled separately.
In the example shown here, you cross two trench lines, and you have the option of engaging both, one, or none of them. If you engage both, you get 4 Bravery points and must roll twice, challenging the value 3 first and then the value 1.
Points Scored in the Trench
The Bravery points earned by engaging the Trenches are added to the Bravery points of the current mission.
In the example shown here, the target has been destroyed (D) with Full Bravery (16 points); during the mission flight, 3 Bravery points were earned in the Trench; they are added together, resulting in a final mission score of 19.
Lucky Strike (Advanced Rule)
Lucky Strike mode adds a gamble to your Operation by allowing you to cancel a Mission and create a "surprise" one.
You can create a maximum of 3 "Lucky Strike" Missions per Operation.
Choosing to create a "Lucky Strike" Mission cancels the die roll for Mission assignment.
Instead of rolling the die, you cancel an unperformed Mission and create a new one from scratch in the column of the just-canceled Mission.
How to Create a Mission
-
Roll the die to determine your Target.
Die Target 1 Tank 2 Battleship 3 Aircraft 4 Convoy 5 Submarine 6 Airship -
Roll the die to determine the distance to the Target by adding 7 to the roll outcome. Example: +7 = 12.
-
Roll the die to determine the Zone.
Die Zone 1 G/S 1 2 G/S 2 3 G/S 3 4 G/S 4 5 G/S 0 6 You choose the zone In the example shown here, Zone 3 is automatically designated as "S" (Sea) because the target is a Ship.
For Air Targets (Aircraft and Airship) the zone type (S or G) is not automatic and you will have to roll to determine it; outcome of the launch 1-2-3 = Sea (s), 4-5-6 = Ground (g).
Performing a Lucky Strike Mission
Once the Lucky Strike Mission is created, you can either perform it immediately or choose to perform the other Mission in the column.
If there are no other available Missions in the column, you will be required to either perform the Lucky Strike Mission or carry out a Free Flight.
Each Lucky Strike Mission performed immediately (i.e., right after creation) rewards (in case of successful mission D or H) with a bonus of 5 Bravery points to be added to the mission result.
Hellish Storm (Advanced Rule)
The "Hellish Storm" mode adds difficulty to your Operations.
By rolling the die, you will determine, before takeoff, in how many missions and in which sectors the hellish storm will be present: completing a mission in a sector with the storm will be more challenging but also more rewarding.
Where Is the Hellish Storm?
Roll the die once for each non-"Lucky Strike" mission on the Operation Tab.
If the outcome of the roll is: 1 = NW, 2 = NE, 3 = SW, 4 = SE; the storm will therefore be present in the corresponding sector. If the die result is 5-6, the storm will not be present.
Example: Die roll 3 = SW. Draw a cloud within the mission map. If you will face this mission in the sector with the storm (i.e. SW), the mission tolerance will no longer be "distance plus zone" but "distance minus zone".
In the example shown, the dice roll resulted in 3, indicating a storm present in the SW sector. The mission tolerance will no longer be distance+zone (12+4=16mm), but instead distance-zone (12-4=8mm).
The dice has been rolled for all non-Lucky Strike missions, and the Operation can now begin.
Hellish Storm Bonus
Positive Bravery points earned by completing a mission (D or H) in a sector with a storm are doubled. For example, if you earn a Full Bravery of 16, it becomes 16x2=32 Bravery points.
Negative Bravery points do not double.
The mission in the example was undertaken in the SW storm sector, therefore with a Mission Tolerance of 8mm (12-4=8). The outcome of the mission was D, and therefore the Full Bravery conquered (16) is doubled (16x2), becoming 32.
Taking Off From a Flak Area
When you take off (start of the game) from a Flak area, it is inactive (thus harmless) during your first flight (movement) and will also be so during your landing flight.
Aircraft Shot Down
Each damage (or "major" damage) to the plane involves a Malus -1; if you reach or exceed the damage limit, the plane is shot down, you suffer an additional Malus of -10, the Operation ends, and you proceed to calculate your final score.
Out of or Insufficient Ammo
When the Ammo runs out, you can no longer carry out missions and must return to the base (free flight) effectively ending the operation.
When there is insufficient Ammo to accomplish a mission, it is marked as "Failed" and none of your remaining Ammo is spent (canceled).
Landing
Landing ends the Operation and is accomplished by returning to the point whence you took off; it must take place with a free flight and (as for any free flight) every millimeter, downward or upward, compared to the value used, will attribute Malus -1.
End of the Operation
The operation can be terminated at any time by returning (landing) at the base (the game's starting point).
Each mission "not performed" (i.e. not tackled) results in a Malus -5.
At the end of the Operation, you calculate all the Bravery points obtained by subtracting all of the Malus points and adding any bonuses earned, thus obtaining your final score.
Combos and Operation Briefing
Each Operation has its set of Combos and objectives that can either boost or lower your final score.
Combos
Each operation includes 5 unique combos. If you complete each combo, you will receive Bonus points. Unrealized combos incur no Malus.
The Combos panel printed on page 13 of the rulebook lists five combos, as follows (the crossed dashed-circle icon is the Flak symbol, marked D when destroyed):
- 3x Convoy + 1x Flak: D: +5
- 3x Convoy + 2x Submarine: D or H: +6
- 3x Battleship + 1x Flak: D: +6
- 3x Battleship + 2x Tank: D or H: +6
- Aircraft + Airship + 2x Flak: D: +9
Note: the Operation Tab printed on page 2 shows four combo lines (D/H x3 Convoy = +10; D x2 Convoy + H x1 Tank = +12; D x2 Aircraft + D x1 Airship = +18; D x2 Submarine + D x2 Battleship = +30). Both sets are transcribed as printed.
Operation Briefing
Each operation has its briefing, which includes four possible objectives to be met by the end of the operation.
Before taking off (start of the game), you MUST accept at least one Briefing objective by flagging the pertaining star.
Unlike the combos, the Briefing objectives are both positive and negative (±), which means that for any objective accepted and not met by the end of the Operation, a Malus equal to its value is imposed.
Briefing targets printed on page 13 (each objective is marked with a star or an X mark on the sheet):
- Max 10 Damages: ±9
- 5 Targets D or H inside Flak areas: ±7
- All the Naval forces D or H: ±10
- 3 Targets D inside Flak areas: ±9
Campaign Mode: Operation "All-In"
The "Campaign" mode is played solo, facing the special "All-In" Operation on three different battlegrounds (Battleground Maps).
You can choose to play the "Campaign" mode with or without the Trenches, Lucky Strike, and Hellish Storm rules, adding more or less difficulty to the challenge.
The game follows the usual rules, but with some differences.
The "All-In" Operation consists of 24 Missions + 6 Lucky Strike slots, all of which can be used, meaning you can create up to 6 Lucky Strike missions.
The available resources must be managed effectively across all three battlegrounds, which you will tackle one after another (in the sequence you prefer), in order to complete the "All-In" Operation with the highest Bravery score possible.
Operation "All-In" Tab
The All-In Operation Tab lists the following missions, in six columns:
- Row 1: Tank 12(g4), Submarine 11(s4), Convoy 10(g2), Aircraft 9(g4), Battleship 8(s0), Convoy 12(g0).
- Row 2: Submarine 9(s3), Convoy 10(g3), Tank 8(g1), Battleship 10(s1), Aircraft 11(s3), Battleship 12(s2).
- Row 3: Tank 12(g4), Submarine 11(s4), Convoy 10(g2), Aircraft 9(g4), Battleship 8(s0), Convoy 12(g0).
- Row 4: Submarine 9(s3), Convoy 10(g3), Tank 8(g1), Battleship 10(s1), Aircraft 11(s3), Battleship 12(s2).
- Row 5: six blank mission slots (dashed line and "( )") for Lucky Strike missions.
Each mission slot has an "H" box, a "D" box, a Bravery line, a sector compass (NW, NE, SW, SE) and a box at the upper right.
The lower part of the All-In Operation Tab holds:
- Damage track (Damage -1 each), with an Aircraft Malus box.
- Free Flights + Landing track: 12, 12, 11, 11, 10, 10, 9, 9, 8, 8, with a Free Flights/Landing Bonus/Malus row and a Saved Free Flights (+3 each after landing) row.
- Ammo track.
- Bombs track: Bombs Malus (-5 each) and Flak Bonus (+2 each).
- Combos:
- D/H same target x4 = +15
- D same target x4 = +30
- All D/H in a column = +20
- All D in a column = +40
- Briefing targets:
- Max 10 Damage: ±9
- Max 3 Major Damage: ±7
- 6 Targets D or H inside Flak areas: ±7
- 4 Destroyed Flak: ±8
- 2 Targets D in the same sector: ±9
- Accomplished Missions Maps for the 1st, 2nd and 3rd Battlegrounds, each with its BRAVERY track.
- A Bravery/Malus/Bonus calculus area and a FINAL SCORE box.
Facing the "All-In" Operation
-
Choose the battleground from which to start the Operation and blindly establish your take-off point (which will NOT be your landing point).
-
To be able to leave a battleground and move on to another map you must have completed (D or H) at least 1 and no more than 2 missions in each sector of the current map.
-
The transition to the next battleground is done by blindly establishing the starting position on the new map.
The progress of the game on each map follows the normal rules, the only difference is that Bonuses, Penalties, Combos and Objectives of the Operation will be counted only after the landing (end of the Operation) which will take place on the last map, when you have to land at the starting point of the third battleground.
Resource Retrieval
When you abandon a map to move on to the next one, you must record the Bravery points earned by completing missions in the designated space of the Operation Tab.
You can remove aircraft damage and replenish Ammo before commencing action on the next map by "spending" (subtracting) acquired Bravery points.
"Cost" of Resources
- 2 Bravery points for each aircraft damage (minor or major) you want to recover.
- 1 Bravery point for each Ammo you want to recover.
Example: You have completed at least one mission in each sector of the first map and earned 35 Bravery points by executing the missions. You have 7 aircraft damage and have used 35 ammo. You want to change the battleground, but before doing so, you wish to remove 3 damages from the aircraft and recover 15 Ammo. Therefore, you "spend" 21 Bravery points, replenish the resources by clearing the checkmarks, and update your Bravery points, which decrease from 35 to 14. Now you can face the second battleground with only 4 damages to the aircraft and with only 20 Ammo used.
If you're not playing on laminated maps with erasable markers, use an eraser to update the score and resources.
Bombs
Bombs are non-recoverable, and you have 12 available for the entire Operation; their actual usage is indicated as shown in the image.
The usage of a bomb is indicated by a single dash, and upon the second usage, a second dash will create a cross to indicate that another bomb has been used. Each icon therefore serves to indicate that two bombs have been used.
In the example image, 5 bombs have been used.
Free Flights
There are 10 free flights available for the entire "All-In" Operation, and they can be used in any order.
End of the "All-In" Operation
The "All-In" Operation MUST end with a landing on the third battleground; any other conclusion results in the Operation failing.
Once the landing is completed, you can tally the Bravery points earned in the three maps and calculate the Bonuses, Penalties, Combos, and Operation Objectives to determine your final score.
"Face to Face" 1vs1 Mode
IMPORTANT: prior to engaging in the "Face to Face" mode, it is essential to have a complete mastery of the rules of McBaron solo mode.
In 1vs1 mode, two players compete on the same battleground.
You can choose to play the "Face to Face" mode with or without the optional rules of Trenches, Lucky Strike, and Hellish Storm, adding varying levels of difficulty to the challenge.
All dice rolls related to Fire Response, Flak, and Trenches concerning one's turn will always be made by the opponent.
The game retains all the rules of McBaron solitaire mode, but with some significant differences.
-
In the "Face to Face" mode, not all movements (flights) are measured; players, taking turns, can make "agreement proposals" (Agreement) that the opponent may or may not accept, without having to measure their own movement.
-
Opponents can engage in combat (Fight) and inflict damage on each other's aircraft.
-
If one of the two opponents crashes (the aircraft exceeds the allowed damage limit), the challenge ends with the victory of the opponent.
If no aircraft is shot down, the player who has the most Bravery points at the end of the Operation (after landing) will be the winner.
The Operation Tab's 1vs1 section has an Agreement track (binocular icons) and a Fight track (crosshair icons).
Setup
The players choose the battleground on which they will compete, each take an Operation Tab relating to an identical Operation, and accept (marking the related star), at least one Mission Objective.
Players Turnover (Overview)
The player who starts (A) blindly establishes his/her own takeoff (and landing) point, and the same is done by the opponent (B).
- Player A rolls the die and identifies the mission he/she will carry out, so does B.
- A marks his new position on the map (flight) with the pencil, so does B.
- A completes his/her game turn (during which B may or may not offer an Agreement).
- B completes his/her game turn (during which A may or may not offer an Agreement).
The next turn will be started by B, and so on, with a constant alternation of A-B...
Game Turn
Player A marks the new position of his/her aircraft with the pencil.
Player B can either allow Player A to check the outcome of his/her play using a ruler or propose an "Agreement" to Player A.
★ If player B does not propose an agreement, A normally takes his/her turn and then passes the turn to B.
★ If player B wants to offer an agreement, he/she must cancel one of his "Agreement" icons and propose to player A not to measure his/her movement and instead to accept his/her estimate of the millimeters of distance from the target relative to the movement that player A has just made.
Agreement
Example: Player A takes on a mission 12(g4) and has just marked the new position of his/her aircraft with the pencil.
Player B offers an Agreement of 5 millimeters, i.e. he/she proposes to player A not to proceed with the measurement but to accept "blindly" that he/she has arrived at a distance from the target of 5 millimeters (downward or upward).
If A accepts the Agreement, no measurement is taken, and A continues his/her turn of play as if he/she had measured his movement with a result of 5 millimeters from the target.
If A rejects the Agreement, he/she proceeds to measure his/her displacement:
- If the distance from the target is less than the one proposed by the opponent, player A earns double (x2) Bravery points compared to the outcome of the mission, and the opponent cannot respond to fire under any circumstances.
- If the distance from the target is equal to or greater than that proposed by the opponent, player A "conquers" Bravery points "0" (even if the mission is D or H), he/she cannot declare the mission Aborted and MUST therefore use 1 Ammo for each millimeter of distance from the target.
"Mission Failed" Agreement
If the Agreement proposed by the opponent signifies mission "Failed" (i.e. the opponent proposes a value in millimeters greater than the Mission Tolerance) the current player can:
- Accept the Agreement receiving Full Dishonor (Bravery Malus) and his/her turn ends.
- Reject the Agreement and proceed with the measurement.
- If the player rejects the Agreement and his/her mission indeed turns out to be a "Failed" mission, the player receives double (x2) Full Dishonor (Bravery Malus).
- If his mission falls within the Mission Tolerance, the player achieves double (x2) Bravery points.
No More Agreement
When a player runs out of "Agreement" icons, he/she can no longer propose an Agreement to the opponent.
Free Flights and Agreement
Free flights are always measured and are not subject to any Agreement.
Flak and Trenches Management
The management of conflicts against Flak and Trenches must always take place AFTER the opponent's possible agreement proposal, but BEFORE any measurement of the outcome of the movement.
Fight (Shooting at the Opponent's Aircraft)
When, at the end of your own turn, your aircraft is in the same sector as the opponent's aircraft, before passing the turn to the opponent, you can attack the enemy aircraft.
The player who wishes to attack the opposing plane deletes one of his/her six "Fight" icons and states the distance between the two planes; the distance must be expressed in whole centimeters (without millimeters) and has a tolerance (allowed error) of 5mm (downward or upward).
- If the declaration is within the tolerance, the player cancels 1 Ammo per millimeter of distance from the target and inflicts 1 Major damage to the opponent's aircraft.
- If the declaration is outside the tolerance, the player cancels 1 Ammo per millimeter of distance from the target.
The opponent does not suffer any damage, and if he/she wish, using the same number of Ammo just wasted by the opponent, he/she can inflict 1 Major damage to the enemy aircraft.
Example: A and B are in the same sector (SW). Before ending his/her turn, A decides to attack B by declaring that the opponent is at 7cm.
- Scenario 1: The measurement reveals that B is at 6.6cm (within the allowed 5mm error). A uses 4 Ammo (1 per mm of error) and B receives 1 Major damage.
- Scenario 2: The measurement reveals that B is at 6.2cm (outside the allowed 5mm error). A MUST use 8 Ammo (1 per mm of error), B does not receive any damage, and if he/she wish, using 8 Ammo as well, he can shoot back, causing 1 Major damage to A.
No More "Fight"
The player who runs out of "Fight" icons at his/her disposal can no longer attack the opponent's aircraft.
End of "Face to Face"
The game ends with both players landing (1) or when one of the aircraft is shot down (2).
- After both players have landed, they can calculate their scores, taking into account Bonuses, Maluses, Combos and Mission Objectives; the player with the highest score is the winner.
- When one of the aircraft is shot down (exceeding the allowed damage limit), the challenge ends, and the opponent is declared the winner.
"Compass" Mode and "Blind" Mode
You can play McBaron in two modes:
- "Compass" mode: with the Battleground Map printed on paper, using a pencil.
- "Blind" mode: using an erasable marker on a laminated Battleground Map.
"Compass" Mode
The "Compass" mode is the simplest; past flights will help you.
You can easily recreate some distances and make your task easier by reading the Mission tabs, but achieving a good score will still be a tremendous undertaking!
"Blind" Mode
The "Blind" mode is the hardest.
Once the outcome of your move (Mission or Free Flight) has been checked, you erase the previous position by proceeding from mission to mission "blindly", with no reference on the map.
The only position you must not erase is the first one (take-off point) which will serve as a reference for landing.
Measuring Accuracy
A millimeter may seem like an "extreme" measure, but it's not; it is certainly a small measure but clear and measurable with precision, so much so that the small dot that indicates the position of your aircraft can occasionally be discovered in the middle of two millimeter notches.
When this occurs, the player's most advantageous millimeter is always considered to be the correct one.
Recruit Training
McBaron, despite being highly arcadey, is a game full of choices and with its own (basic) depth; some novice recruits may find it a little complex.
In real terms, with some practice, the complexity will fade and the game processes will expose their simplicity.
- To get a feel for the game, try a Training Operation playing without Flak (ignoring its existence), and choosing missions by yourself (without using the die); even so, conquering Bravery points, making combos, and accomplishing Operation Objectives will be really challenging.
- Introduce the Trenches, as well as the "Lucky Strike" and "Hellish Storm" modes, gradually into your games; a good degree of experience is required to successfully tackle them.
Despite the different game modes, McBaron is mainly a solitaire, designed to while away the time and burn your brain a bit, so try to be intransigent with yourself (and with the measurements) and don't get discouraged by mistakes; the score can vary a lot from game to game, sometimes you will finish with Dishonor (negative score) and sometimes with a positive Bravery!
I envisioned the "centimeter trilogy", of which McBaron is the second chapter, with the goal of creating tiny games to live small adventures with a pencil and a sheet of paper.
I genuinely hope you have a good time.
Let's Fly.