Invasion: The Conquest of Kings
Invasion: The Conquest of Kings Rulebook
Table of Contents
Table of Contents
How to Win
A player's goal in Invasion is to kill opposing players' kings. When a player manages to kill a king, they get a Kill Token.
The first player to obtain two Kill Tokens WINS THE GAME!
The Pieces
- 2 Blue Mats
- 120 Resource Cards
- 49 Advantage Cards
- 24 Land Tiles
- 8 Combat Dice
- 2 Resource Dice
- 5 Kill Tokens
Each player:
- 12 Roads
- 24 Soldiers
- 1 Buy Value Card
- 1 King
- 6 Castles
- 1 King's Army Counter
5 Hero Player Cards: Human, Elf, Dwarf, Orc, Undead
Game Set Up
Place the two blue mats side by side. These will represent water and the total map area.
Shuffle the 24 land tiles and place the top one in the center of the mats.
There are four different land tiles and each has a corresponding resource card: Crop, Gold, Wood and Stone.
For a 4-player game, players go clockwise and take turns attaching each land tile to an already placed land tile.
For a 3-player game, remove one of each land tile before placing.
A 4-player game map consists of 24 land tiles, and a 3-player game map consists of 20 land tiles.
Each player rolls a die to determine turn order. Then moving clockwise, each player takes a turn placing one castle on the map, until they have three castles placed.
Castles are placed between two land tiles and must be placed one road length away from other castles.
The two land tiles that a castle is on determine which resources they can collect.
Once all castles are placed, players collect one resource card for each land tile their castles touch. This is their starting hand.
A player with a castle on the coast can utilize port trading, which allows them to trade any four resource cards for one other resource card that they need.
Castles by enclosed lakes cannot port trade.
GAME TIPS:
- Make sure your starting three castles give you access to all four resources and are all close together. This will help you build up easily, and not spread your territory too thin.
Lastly, the players place their king next to one of their castles. The King's Army counter is placed in front of the player with four soldiers in it. This represents the King's Army.
Starting a Turn
Roll Resource Dice
The beginning of every turn starts with the player rolling the two 6-sided resource dice and announcing the two resources rolled.
The resources shown on the dice are the resources that are harvested this turn. All players get to collect these resources.
A player collects one resource card for every castle they have on a tile of the corresponding resource.
For example, let's say the resource dice show stone and gold and the green player had castles set up in this way. The green player will collect 2 stone and 1 gold.
Rolling two of the same resource means that players collect double of that resource for each castle placed on that land tile.
After the initial resource dice roll, a player can use his turn to Build, Move, Engage in Combat and Negotiate.
Scarcity
If a resource card pile is looking like it will run out on that turn, the player who rolled the resource dice gets to collect first. Then going clockwise, the next players collect until the resource card pile is empty. If the resource card pile is empty, players do not collect that resource on that turn.
Building
Players spend their resource cards to build roads and castles or buy soldiers and advantages. Spending a resource card consists of taking it out of the player's hand and putting it on a resource card pile.
| Piece | Cost | Placement / Notes |
|---|---|---|
| Soldier | A soldier costs 1 crop and 1 gold. | Soldiers spawn at castles, so they are placed on a land tile next to a player's castle with a max of 15 soldiers per tile. |
| Road | A road costs 1 wood and 1 stone. | A road is placed between two tiles and must be connected to a road or castle. |
| Castle | A castle costs 2 wood and 3 stone. | A castle must be connected to a road and be at least one road away from any other castle. |
| Advantage | Advantage cards cost . |
GAME TIPS:
- At the beginning of the game, players should prioritize roads and castles in order to expand their territory, and collect more resources.
Crowning a New King
When your king dies, it is important not to panic. You can crown a soldier and upgrade them to the new king free of cost.
However, it is advised to wait until you have enough soldiers to defend the new king.
Movement
A soldier is allowed to move one land tile per turn.
However, a King's Army can move two land tiles per turn.
Road Movement
In lieu of one land tile movement, players can move their units along a connected road. Any castle connected by roads counts towards road movement.
In this example, the green soldiers can use one tile movement to travel along the road to the other castle.
The King's Army would be able to use their second movement to move one additional tile.
You can do this in any order, meaning that the King's Army could move one tile before or after using his road movement.
Combat
There are two types of combat in Invasion: BATTLES and SIEGES.
Players can't engage in combat until each player has taken 2 turns.
Battles
A player can have multiple battles on their turn as long as they have soldiers or their King's Army in the same tile as an enemy.
The King's army counter represents all the soldiers traveling with the king. The actual strength of the army is therefore the number of soldiers plus one king (+1).
In the pictures to the left, the King's army has 7 soldiers so green player rolls 8 combat dice.
The King's army can kill on a 5 or 6. So in the above combat roll picture, three soldiers would be killed. Theses soldiers are removed after both players have rolled.
When not in a King's army, a soldier only kills on a 6. The green player in this example would only get to roll 3 dice because there are only 3 orange soldiers.
After both players roll their combat dice and remove their dead soldiers, combat pauses and any soldiers involved can't move until the next turn.
On either player's next turn, they choose whether they want to continue battling or whether they want to retreat to another tile.
3+ Player Battles
A third player can move into a land tile to join two players already in combat.
In this case, the player whose turn it is the attacker and the other two become the defenders.
The attacker declares how they are allocating their combat dice between the other players before attacking.
In 3+ player battles, both defenders may roll their combat dice against the attacker, but cannot attack each other.
If the attacker has allocated more dice to a certain defender, this player would roll his defensive dice first. In all other cases this is done in turn order.
King Kills
A player must kill all soldiers in the King's army before killing the king and getting a kill token. If two players get the second king kill at the same time, then the game is played to a third king kill.
GAME TIPS:
- Be careful when you are in combat. If you engage you will have a whole round before you can retreat or reinforce your army.
Sieges
A player can capture another player's castle by sieging it if they have at least three soldiers on the tile. A siege cannot be attempted after a battle on the same tile or if the tile is blocked (See Page 11).
The sieging player rolls two combat dice and. If the roll is a 7 or higher, the castle is under siege and tipped on its side. If the roll is a 12, the castle is instantly captured and replaced with one of theirs.
A King's army may reroll their siege dice.
Players cannot siege a castle that is already under siege.
If your castle is under siege, you have one turn to defend it. If you do not, the castle is captured on the sieging players next turn before his resource roll. (if there are no castles left to replace it with, destroy the castle instead)
In order to defend the siege, the defending player must move into the tile and to battle the enemy.
The siege remains unresolved until the battle is concluded. If the sieging player wins the battle, the castle is captured.
But if the sieging player is defeated or retreats, then the siege wears off and the castle goes right side up.
GAME TIPS:
- If one of your enemies has all their soldiers together, try a double siege. Sieging them in two places might force them to divide their army into two weaker ones.
Blocking
A block is done by having at least three soldiers or a King's army on a tile. This prevents an enemy from sieging, moving, or building.
Siege Blocks
A blocked land tile with a castle on it prevents the castle from being sieged on that tile. However, the castle can still be sieged from another tile.
Movement Blocks
This prevents another player moving through a blocked land tile.
If the enemy has a road, both land tiles on either side of the road need to be blocked to prevent road movement.
Build Blocks
When two adjacent land tiles are being blocked, this prevents an enemy from building roads or castles in between those tiles. In this example, the white player cannot build next to the green soldiers.
Armies cannot move through water, so water acts as a blocked tile for build and movement blocks.
A player can clear a block by killing the blocking soldiers or King's army in that land tile. However, only one battle can happen in each tile per player's turn, so the player only has one chance to clear the block on their turn.
GAME TIPS:
- If a player is trying to siege a castle that has siege blocking, you can send in a portion of your army first to kill the soldiers, and then send in the rest to siege the castle, but be careful not to separate too many soldiers from your king and leave him vulnerable.
Negotiation
Invasion is a social game, where a player's skill in negotiation is just as important as their skill in battle.
On their turn players can trade resource cards and advantage cards, and also negotiate with other players to do things like:
End combat (i.e., a player lifts their siege, or stops battle)
Form an alliance or truce for a set number of turns (i.e., no combat for two turns)
Defend a siege (i.e., attack an army that is sieging another player's castle)
Road passage (i.e., let another player use your road on their turn)
GAME TIPS:
-
A player may let you use their road in pursuit of a common enemy, but always be cautious because they may not let you use it on the way back.
-
There is no easy way to actually enforce an alliance in Invasion so choose your friends carefully.
5 Player Games
If you have a copy of the 1st edition of Invasion, then you can use extra pieces from it for larger games.
From your first edition, take out the orange pieces, one of each land tile and ten of each resource card.
And then you should have what you need for a 5-player game:
- Five different colors
- 28 land tiles
- 50 of each resource card
In five player games, the 2-turn peace treaty at the start of each game is changed to a 1-turn peace treaty.
GAME TIPS:
- A 3 or 4 player game of Invasion can range between 1 and 2.5 hours. With each additional player the game takes longer so be prepared for a 5-player game to take up to 4 hours.
2nd Edition Changes
For those of you who had purchased the 1st edition of Invasion, you might have noticed a few changes to the base game.
Don't worry, we wrote down a short list in case you missed any:
- No cost for a new king. Upgrade from soldier instead.
- Replaced advantage cards (see back cover).
- That's it! Enjoy the game.
Heroes of Kaldora
This box also includes the pieces required for our fantasy expansion: Heroes of Kaldora.
In this expansion, each player takes turns picking one of the following player cards. This is done after map creation in reverse turn order.
- Human
- Elf
- Dwarf
- Orc
- Undead
Each player gets one faction ability and three different king classes.
- The faction ability is a special ability that you can use whether you have at least 3 soldiers together or just a king.
- The king classes. Each king you crown has an ability that can be used only once on your turn.
- Each player card comes with a King's army grid and buy values so you don't need the other two.
The class grid printed in the rulebook lists three classes: Rogue, Necromancer and Enchantress.
- Rogue: The Rogue moves unseen through blocked tiles and evades opportunity attacks.
- Necromancer: The Necromancer can reanimate corpses to roll 5 extra combat dice.
- Enchantress: The Enchantress mesmerizes 3 enemy soldiers in same or adjacent tile to move them one tile over.
The grid's small print was read from a low-resolution page image; the class wording above is transcribed as legible.
Everyone picks a class for their starting king and each new king you crown has to be a different class.
Scan the below QR code for in-depth class gameplay mechanics. (The full class mechanics are behind this QR code and are not printed in the rulebook.)
Advantages
Advantage cards can only be used by a player on their turn. You can play multiple advantage cards on the same turn and some can be stacked on top of each other for a greater effect.
Once an advantage card is used, it is put into a discard pile. When the advantage card pile is empty, the discard pile is reshuffled and becomes the new advantage card pile to draw from.
Inspiration: Use this card after rolling your combat dice. It allows two 4's that are rolled to be counted as kills. Inspirations can be stacked so playing two together lets you use four 4's as kills.
Barrage: Use this card after your siege roll to add +2. A 12 still gives you an immediate capture with a barrage. Barrage cards can also be stacked so playing two together will give you +4 to your roll.
Harvest: Collect any combination of four resource cards.
Natural Blessing: After rolling your resource dice, play this card to reposition one die. No one else can harvest from the repositioned die. Can be stacked for both dice.
Protection: Activate this card when your castle is under siege. Instead of defending it this turn, you can wait one additional turn.
Stealth-riding: Move along another player's road without their permission. This only applies to one army.
Espionage: Steal an advantage randomly from any player.