RulesPal
Chat
Rulebook
If Dragons Fight: The Struggle for Taiwan thumbnail

If Dragons Fight: The Struggle for Taiwan

If Dragons Fight: The Struggle for Taiwan Rulebook

Table of Contents

Table of Contents

  • 1.0 Introduction
    • 1.1 In General
    • 1.2 Scale
    • 1.3 Definitions
    • 1.4 Orders of Battle
    • 1.5 Strategic Assumptions
    • 1.6 Solitaire Play
  • 2.0 Components
    • 2.1 In General
    • 2.2 Game Map
    • 2.3 Counters
    • 2.4 Sample Unit
    • 2.5 Unit Color Schemes & Abbreviations
    • 2.6 Unit Types
    • 2.7 Unit Organizational Sizes
    • 2.8 Attack & Defense Factors (AF & DF)
    • 2.9 Movement Factors (MF)
    • 2.10 Step Strength
    • 2.11 Marker Counters
  • 3.0 How to Win & Hex Control
    • 3.1 Victory Points (VP)
    • 3.2 Taiwanese Sudden Death Victory
    • 3.3 Hex Control
  • 4.0 Turn Sequence
    • 4.1 In General
    • 4.2 Phases
    • 4.3 Phase Sequence
    • 4.4 Chinese Air Superiority Phase
    • 4.5 Movement & Combat Phase Sequencing
    • 4.6 Mutual Cyberwar Phase
    • 4.7 Ending Turns & Ending Play
  • 5.0 Stacking
    • 5.1 In General
    • 5.2 Stacking Limit
    • 5.3 Divisions, Brigades & Groups
    • 5.4 Stacking & Movement
    • 5.5 Terrain & Stacking
    • 5.6 No Fog of War
    • 5.7 Free Stackers
  • 6.0 Set Up & Invasion
    • 6.1 In General
    • 6.2 Taiwanese Set Up
    • 6.3 Chinese Landing Zones Selection
    • 6.4 Turn 1 Air Superiority
    • 6.5 Chinese Main Landing
    • 6.6 Chinese Airborne Entry
    • 6.7 Chinese Air Assault (Heliborne SOF) Entry
    • 6.8 Chinese Marine Entry
    • 6.9 Chinese Invasion Combat Attacks
  • 7.0 Cyberwarfare
    • 7.1 In General
    • 7.2 Procedure
    • 7.3 Cyber Attack
    • 7.4 Enemy OODA Loop Disruption
    • 7.5 Friendly OODA Loop Enhancement
    • 7.6 Chinese Air Superiority Disruption
  • 8.0 Chinese Airpower
    • 8.1 In General
    • 8.2 Airpower Marker Placement
    • 8.3 Range
    • 8.4 Airpower's Effect on Movement
    • 8.5 Airpower in Combat
    • 8.6 Airpower Resilience
  • 9.0 Chinese Supply
    • 9.1 In General
    • 9.2 Chinese Supply States
    • 9.3 Willful OOS
    • 9.4 When to Check for Supply
    • 9.5 Tracing Ground Supply Lines
    • 9.6 Chinese Airborne Supply
    • 9.7 Chinese Air Assault Supply
  • 10.0 Chinese Reinforcements
    • 10.1 In General
    • 10.2 Entry Onto the Map
    • 10.3 Marine Entry
    • 10.4 Airborne Entry
    • 10.5 Air Assault (Heliborne SOF) Entry
    • 10.6 Regular Ground Unit Entry
  • 11.0 Movement
    • 11.1 In General
    • 11.2 Limits
    • 11.3 No Minimum Movement Ability
    • 11.4 Enemy Units
    • 11.5 Stack Movement
    • 11.6 Splitting Stacks
    • 11.7 Different MF in Stacks
    • 11.8 Terrain & Movement
    • 11.9 Natural Terrain & Water Barriers
    • 11.10 Clear Terrain
    • 11.11 Mountain Hexes
    • 11.12 Blocked Mountain Hexsides
  • 12.0 Combat
    • 12.1 In General
    • 12.2 Multiple Defenders in One Hex
    • 12.3 Multi-Hex Attacks
    • 12.4 Indivisibility of Units
    • 12.5 Attack Sequencing
    • 12.6 Stacks Attacking
    • 12.7 Combat Procedure
    • 12.8 Poor Odds Attacks
    • 12.9 CRT Odds Limits
    • 12.10 Clear Terrain Hexes
    • 12.11 Mountain Hexes
    • 12.12 Blocked Mountain Hexsides
  • Terrain Effects Chart
  • Combat Results Table
  • Turn Sequence

1.0 Introduction

1.1 In General

If Dragons Fight: China vs. Taiwan in the Near Future (IDF), is a "what if" simulation of the fighting that could occur across that island, within the timeframe of the next five or so years, if the mainlanders decide political or geostrategic conditions have evolved to where they must resolve the issue finally and by force. Such a situation would most likely occur if either or both the following two developments took place: 1) the Taiwanese officially declared their independence; and/or 2) the mainland Chinese learned the islanders had gotten, or were about to get, nuclear weapons.

This is a two-player wargame of low-intermediate complexity that posits the critical ground-phase of this might-be war as lasting no longer than about two weeks. Such a campaign would most likely have to be preceded by a roughly equal period during which the mainlanders would use aero-naval bombardment to neutralize the ships and planes of the defenders – a long established prerequisite for oceanic invasions of this type. At the start of the game that preliminary step is presumed to have been completed. The follow-on ground war would likely be supremely violent in regard to how wars have recently been judged, but would have to be limited as to its duration. After a total crisis – aero-naval and ground – of about a month, it's most likely some kind of negotiated settlement would have to be put in place (barring the complete conquest of Taiwan) due to the inescapable economic, political and social disarray both sides would be put through by such a supreme effort.

In sum, then, the Chinese player is attempting to seize as much of the urban area of Taiwan as he can, while his opponent is seeking to contain the invaders' beachhead in as small an area as possible. The operational goal of the Chinese is to seize enough territory to render Taiwan inoperable as an independent polity or, failing that, at least create a lodgment large enough to force the islanders to grant major concessions in order to get them to leave.

1.2 Scale

Each hexagon on the map equals seven miles (11.3 km) from side to opposite side. Each full game turn represents two days. The units of maneuver are brigades ("groups" for special forces heliborne units) and divisions, each with some 5,000 to 12,000 personnel and around 50 to 300 armored fighting vehicles.

1.3 Definitions

If a rule is said to apply to the "Chinese," it applies to the red-background units of the mainlanders (the People's Republic of China or PRC). If a rule is said to apply to the "Taiwanese," it applies to the blue units of the islanders (the Republic of China or ROC, a.k.a. the "renegade province").

1.4 Orders of Battle

Both sides' orders of battle are drawn from the most recent and complete unclassified sources available. Of course, the overall Chinese ground force goes way beyond the units included in the game. For this invasion, however, about the most that could be supplied would be their airborne divisions, their special forces groups, their marine brigades, their purpose-organized amphibious regular army units, and the line units of the Nanjing Military District. (Due to its proximate geographic location in relation to Taiwan, the NMD would be the higher-level headquarters most likely to be directing this operation.) The entire Taiwanese ground force order of battle – when represented at this scale within these system parameters – is included.

1.5 Strategic Assumptions

Players will quickly notice there's no possibility for non-Chinese intervention into the air or ground war in the game. That's because it's not reasonable to believe the PRC would risk a wider war by launching this operation unless they'd first managed to diplomatically isolate Taiwan, at least temporarily, while the rest of the world judged whether any aid effort was worthwhile or even viable.

The exception to that is in the cyberwarfare rules. In that arena of "war in the cloud," it seems likely the Taiwanese would have major (though certainly still clandestine) support of many of the world's democratic governments as well as hordes of politically unaffiliated techies. Whether such efforts can prove decisive remains one of the great unanswered questions of 21st century warfare.

Another overarching characteristic of the game is its unforgiving combat resolution subsystem. That is, there's no possibility of retreat from battle: all combat results are sustained as strength losses. That's to reflect the fact we have here two well armed forces, both highly motivated to achieve their objectives, and both armed to the teeth with the most lethal modern weaponry available. At the same time, both militaries would be new to warfare of this intensity.

We're also assuming the invasion isn't being made during the monsoon season, so there are no rules for severe weather.

1.6 Solitaire Play

Though designed for two-player use, the game is easily adapted for solitaire play.

2.0 Components

2.1 In General

The components to a complete game of IDF include these rules, the mapsheet and the sheet of 176 die-cut cardboard counters (also called "units" and "unit-counters"). Players must provide themselves with a standard (six-sided) die to use to resolve combat and other probabilistic events that occur during play.

2.2 Game Map

The map represents the militarily significant terrain across Taiwan when portrayed at this scale and under these system dynamics. A hexagonal ("hex") grid is printed over it to regulate unit placement and movement similar to the way squares are used in Chess and Checkers. A unit is always in only one hex at any one instant. Each hex contains natural and/or manmade terrain features that may affect movement and combat. The map's terrain representations have been altered slightly from their exact real-world configurations in order to make them conform to the hex-grid. The terrain relationships from hex to hex are, however, accurate to the degree necessary to present players with the same space/time dilemmas that would be faced by their real-world counterparts if this war were actually waged. Each hex on the map has a unique four-digit number printed in it. They're provided to help you find specific locations referred to in the rules. For example, the city of Hengchun is in hex 2235. Those grid numbers also allow you to record unit positions if a match has to be interrupted and taken down before it can be completed.

2.3 Counters

Most of the counters in the game represent combat units, while others are provided as memory aids and informational markers. Carefully punch out the counters. Trimming the "dog ears" from their corners with a fingernail clipper greatly facilitates handling and stacking during play and enhances their appearance. Each combat unit-counter shows several types of information: side, type, attack strength, defense strength, movement factor, organizational identification and nationality.

2.4 Sample Unit

A typical brigade is pictured below. It has an attack strength (or "attack factor" or "A.F.") of "2" and a defense strength (or "defense factor" or "D.F.") of "4." Note that numeric data are printed on both sides of each of the counters. The significance of that is explained below and amplified in section 12.0.

Sample unit: Chinese 3rd Motorized Infantry Brigade. Front and back of the counter are labelled with: Nationality, Organizational Size, Unit Type, Movement Factor, Attack Factor, Defense Factor.

Old Hands Note. There are no zones of control or replacements. (If you don't know what that means, you're not an "old hand" and you therefore needn't worry about it at all.)

2.5 Unit Color Schemes & Abbreviations

Each unit's nationality (and therefore the "side" it's on) is shown by its color scheme. Each unit's organizational identity is shown by its real-world number or an abbreviation of its name.

Note: one Chinese unit, the amphibious tank brigade, hasn't had its true unit identification confirmed in unclassified sources. We've therefore identified it by the reference number used for it by Western analysts: "73156."

Chinese Color Schemes

  • Amphibious-Assault Capable Army Units: black on red
  • All Others: white on red

Taiwanese Color Schemes

  • Reserve Units: black on blue
  • All Others: white on blue

Abbreviations (all Chinese special forces groups)

  • A – Arrows
  • E – Eagles
  • F – Falcons
  • FD – Flying Dragons
  • NT – Night Tigers
  • O – Oscars
  • SB – South Blades
  • SD – Sea Dragons
  • ST – Siberian Tigers

2.6 Unit Types

Unit type symbols on the counters: Air Assault, Armor, Mechanized Infantry, Marines, Airborne, Infantry, Motorized Infantry.

2.7 Unit Organizational Sizes

  • XX – division
  • X – brigade or special forces "group"

2.8 Attack & Defense Factors (AF & DF)

These numbers are measures of each unit's relative ability to attack and defend; see section 12.0 for details.

2.9 Movement Factors (MF)

This is a measure of each unit's ability to move across the hex field printed on the map. Units pay (expend) different costs in MF (also called "movement points" or "MP") to enter hexes, or sometimes to cross hexsides, based on the type of terrain involved. See section 11.0 for details.

2.10 Step Strength

All units in the game contain one through four "strength steps" (also simply called "steps"). That's an arbitrary term used to express the ability of a unit to absorb a certain amount of combat losses before ceasing to be an effective formation (a measure of its "robustness" in current US Army jargon). Those units with combat factors on both sides of a single counter are "two-step" units. If a two-step unit suffers a step loss, it's flipped so its "reduced" side shows (the one with the lower combat factors). If a one-step unit, or a two-stepper that had already been reduced, takes a step loss, it's removed from the map ("eliminated") and placed in the "dead pile." No unit may ever give, loan or otherwise transfer a step to another.

Eight Chinese division-sized units are included in that nation's order of battle. Each of them have four strength-steps available. When such units are reduced to step strengths below those represented on their strongest counter, remove that counter from the map and replace it with its weaker "substitute" counter. Other than that, the principle of step reduction for the divisions is the same as described above. Note that no division will ever have both its counters in play on the map at the same time. Also note their substitute counters are marked with dots in their upper-right corners for easier identification. For more details on this aspect of play, see section 12.0.

2.11 Marker Counters

The following counters (a.k.a. "markers" and "chits") are included in the game as informational and memory aids. Their functions are explained in specific sections of the rules that follow.

  • Turn Marker (see section 4.0)
  • City Hex Control Marker (see section 3.0)
  • Chinese Victory Point Marker (see 3.1)
  • Chinese Airpower Marker (see section 8.0)
  • Chinese Beachhead Marker (see 3.2 & 6.5)
  • Cyberwarfare Marker (see section 7.0)

3.0 How to Win & Hex Control

3.1 Victory Points (VP)

The game will most often be won or lost on the basis of the tally of Chinese "victory points." The Chinese player starts the game with zero VP, and his total will never fall below that level during play. He earns one VP for each city hex he controls. If he reaches a total of eight or more VP prior to the end of Turn 7, play stops and he's declared to have won the game on that account. If the end of Turn 7 is reached and the Chinese player still has fewer than eight VP, the Taiwanese player is declared to have won the game at that time. Keep track of the Chinese VP total using the track printed on them along with the markers provided for that purpose. Also note the supply state (see section 9.0) of Chinese-controlled city hexes is irrelevant in regard to those hex's VP value.

3.2 Taiwanese Sudden Death Victory

If, at any time during play, the Taiwanese player gains control of the hex containing the Chinese beachhead marker (see 6.5) play stops and the Taiwanese are declared to have won the game at that moment.

Design Note. There never any drawn games.

3.3 Hex Control

The idea of "hex control" – which side controls (or owns) certain critical hexes – is only important when considering city hexes and the Chinese beachhead hex. At the start of play the Taiwanese player controls all the land hexes on the map. (No one controls the all-sea hexes, and that's never a consideration in play.) The control status of a city or beachhead hex switches from one side or the other whenever a ground unit of one side is in it unopposed there by the presence of any opposing ground unit.

Control switching for city hexes may occur and reoccur any number of times in every such hex over the course of a game – make the appropriate VP adjustment each time that occurs. If, once established, the Chinese beachhead hex comes back under Taiwanese control, the game ends immediately. Chinese airpower markers (see section 8.0) are never able to take control of any hex.

Taiwanese/Chinese control markers (see 2.11) are provided to place in city hexes that are located in such a way the general run of the front line doesn't make obvious their control status.

4.0 Turn Sequence

4.1 In General

After choosing sides and setting up as described in section 6.0, place the Turn marker in the "1" box of the Turn Track printed on the mapsheet. At the end of every complete turn, advance the marker one space along the track toward box 7.

4.2 Phases

Every turn is divided into six segments (a.k.a. "phases"). Every action taken by the players must be carried out during the appropriate phase as described below. Once a player has finished a particular phase, he may not go back to perform some forgotten action or redo a poorly executed one unless his opponent graciously permits it.

Design Note. Neither player should feel obligated to be gracious; this is war to the hilt.

4.3 Phase Sequence

The phase sequence is given below in outline. The rest of the rules are organized, as much as possible, to explain things in the order they're encountered as you go through each turn's sequence of phases. Each turn's sequence is generally identical (but see 4.5 for the exception).

Turn Sequence Outline

  • I. Chinese Air Superiority Phase
  • II. Chinese Movement or Combat Phase
  • III. Chinese Combat or Movement Phase
  • IV. Taiwanese Movement or Combat Phase
  • V. Taiwanese Combat or Movement Phase
  • VI. Mutual Cyberwar Phase

4.4 Chinese Air Superiority Phase

As mentioned in the introductory section of these rules, since World War II air superiority has been considered a prerequisite for the invaders in amphibious operations of this size. In game terms that means the ROC Air Force has effectively already been neutralized at the start of play, and it can be assumed it will be kept that way during the campaign. Nevertheless, Chinese air supremacy isn't an entirely sure thing and the strength of their air effort must be determined anew by that player during Phase I of each turn.

To make that determination, the Chinese player openly rolls a die at the start of each turn's Phase I. That result (one through six) is the maximum number of aircraft markers he has to use to supplement his ground operations that turn. On Turn 1 that rolled number will be undiminished and applied as-is. On Turns 2 through 7 the Taiwanese player may have the ability – through a successful cyberwarfare effort – to temporarily disrupt or even neutralize Chinese airpower. See sections 7.0 and 8.0 for more details.

4.5 Movement & Combat Phase Sequencing

Except for Turn 1, both players may decide the order in which they will execute their own side's movement and combat phases. That is, during Turns 2 through 7, at the start of Phase II the Chinese player should announce whether he will first take his movement phase or his combat phase. The Taiwanese player should announce the same thing in regard to his own side's phase order at the start of Phase IV. Those decisions are up to the players on Turns 2 through 7. On Turn 1 the sequence for the Chinese is always their movement phase (which is all taken up in terms of the various landing procedures set out in section 6.0) followed by their combat phase (which is all taken up with resolving the various kinds of invasion combat described in section 6.0). That turn's order for the Taiwanese is always their combat phase followed by their movement phase.

4.6 Mutual Cyberwar Phase

At the start of every Turn's Phase VI, both players will generally (and always openly) roll three dice to get a Cyberwar Point (CWP) total of three through 18. That done, subtract the lower total from the higher total. The player with the higher total of CWP has achieved temporary cyber dominance and, accordingly, he can expend those points (the amount remaining after subtracting his opponent's rolled total from his own rolled total) to supplement the combat power of his ground force. If both players roll the same total, neither player has cyber dominance and the two sides' cyberwarfare efforts are considered to be fully tied up that turn battling each other into a temporary standstill. See section 7.0 for more details.

4.7 Ending Turns & Ending Play

When a turn's Phase VI has been completed, that turn is over. At the end of Turns 1 through 6, advance the Turn marker one the Turn Track and start the next turn at Phase I. If the turn just completed was Turn 7, the game is over; see section 3.0 to determine which player won. There are never any drawn games.

5.0 Stacking

5.1 In General

"Stacking" is the term used to describe the piling of more than one unit into a hex at the same time.

5.2 Stacking Limit

Both players may stack up to five brigades' worth of their own side's units in the same hex at the same time. In general, opposing units are prohibited from stacking together. The exceptions to that have to do with both sides' special forces heliborne movement and the initial entry onto the map of Chinese airborne divisions (see 5.2, 6.6, 6.7, 10.4, 10.5, 11.18, 11.19, 12.23 & 12.24 for details). In those cases in which enemy units are temporarily stacked together, the two sides' stacking limits are mutual exclusive and don't affect each other in any way.

5.3 Divisions, Brigades & Groups

Each division counts as two brigades for stacking purposes, which remains true no matter their step strength. Each special forces "group" is considered the equal of one brigade for stacking purposes. Step strength within and among divisions, brigades and groups, never has any effect on the stacking limit.

5.4 Stacking & Movement

The stacking rules are in effect at all times throughout all turns. That means players must pay attention to the order in which they move their units or risk having moves made early in the phase block units moving later in the phase in congested areas of the map. Note, however, there's never a limit on the number of units that may enter and/or move through any given hex over the course of a movement phase.

Units beginning their side's movement phase stacked together need not remain together during that phase; they might be moved off individually or in smaller sub-stacks. No moving unit or stack may pick up units during a move, though newly moving units might enter and remain in an already moved stack's final hex via their own movement.

If any units are found to be overstacked at any time, the owning player must immediately eliminate the excess units of his choice.

5.5 Terrain & Stacking

The various terrains on the map have no effect on the stacking rules.

5.6 No Fog of War

Both players are always free to examine all the units in their own and their opponent's stacks.

5.7 Free Stackers

None of the counters illustrated in rule 2.11 have any stacking value. They may be added to any stacks according to the specific rules governing their uses.

6.0 Set Up & Invasion

6.1 In General

After the two players decide together who will command which side, the Taiwanese player sets up all his units prior to the Chinese player starting the set up of those invaders. All units in the Taiwanese order of battle are available for, and must be included in, that side's set up. All Chinese units in that side's order of battle are potentially available; however, not all of them can be gotten onto the map during Turn 1. Stacking rules must be observed by both players during set up. Also note no Taiwanese unit, and no Chinese unit once entered into play on the map, is ever moved off it except via elimination in combat.

6.2 Taiwanese Set Up

All Taiwanese units may (and must) be set up anywhere on the island that player desires within normal stacking limits.

6.3 Chinese Landing Zones Selection

After the Taiwanese player has completed that side's set up, the Chinese player should examine the map and, out of sight of his opponent, write down the hex number of any one of the 29 amphibiously invadable ("beach") hexes on the map. That hex will be the location where his main force comes ashore and establishes a beachhead. He should write the hex number on a piece of paper, all the while being careful not to let the Taiwanese player see it. The presence of one or more Taiwanese units in the designated hex doesn't prevent it from being chosen in this way.

With that done, the Taiwanese player openly rolls two dice and is then allowed to relocate up to that number (two through 12) of his units from their present positions to any new ones he desires anywhere on the map (again, within normal stacking restrictions). He's not required to relocate any units and, similarly, he might decide to relocate some number smaller than his rolled total would otherwise allow.

Design Note. In effect, rule 6.3 represents the pre-invasion portion of the cyberwar.

6.4 Turn 1 Air Superiority

At this step the Chinese player should roll a die to determine his air superiority situation for Turn 1 and then immediately place those markers (one through six) as described in section 8.0.

6.5 Chinese Main Landing

The Chinese player should next reveal the hex-grid number of the beachhead hex he wrote down earlier. He then takes his two amphibious divisions and one amphibious brigade, places them atop the beachhead marker and moves that stack into the hex provided it's empty of Taiwanese units. If there is one or more Taiwanese units in the designated hex, the Chinese player should temporarily leave the stack in the offshore hex containing the arrow pointing to it. See 12.25 for more details. During Turn 1, except for this kind of coming-ashore combat, if the amphibious force lands in an empty hex, it's not then allowed to attack into an adjacent Taiwanese occupied hex.

6.6 Chinese Airborne Entry

The Chinese player may then select (he's not required to so) any one of his airborne divisions and place it in any clear terrain hex on the map. The presence of one or more Taiwanese units doesn't prevent a clear terrain hex from being chosen for this purpose. During Turn 1, except for the kind of in-hex combat described in 12.24, if the airborne units lands in an empty hex it's not then allowed to attack into an adjacent Taiwanese occupied hex.

6.7 Chinese Air Assault (Heliborne SOF) Entry

The Chinese player may then select (he's not required to do so) one, some, or all of his nine heliborne SOF groups and place them on any hexes on the island (within normal stacking restrictions). The presence of one or more Taiwanese units doesn't prevent any hex from being chosen for this purpose. During Turn 1, except for the kind of in-hex combat described in 12.23, if an air assault unit or stack lands in an empty hex it's not then allowed to attack into an adjacent Taiwanese occupied hex.

6.8 Chinese Marine Entry

The Chinese player may then select (he's not required to do so) one, some, or all of his four marine brigades and place them on any one, two, three or four non-mountain coastal hexes on the island (within normal stacking restrictions). The presence of one or more Taiwanese units doesn't prevent any otherwise eligible hex from being chosen for this purpose; however, in such cases temporarily place the marines in the all-sea hex adjacent to the chosen coastal hex and that landing combat is resolved. During Turn 1, except for this kind of coming-ashore combat, if the amphibious force lands in an empty hex, it's not then allowed to attack into an adjacent Taiwanese occupied hex.

Design Note. As optional treatment in regard to rules 6.6, 6.7 and 6.8 you may care to make the Chinese player go through the same secret-pre-invasion choice sequence as given in 6.5. We offer that more time-consuming approach only as an optional rule because in playtesting it didn't seem worthwhile.

6.9 Chinese Invasion Combat Attacks

When all the initially entering Chinese units have been placed as described above, that player should first resolve the beachhead landing hex battle (if any). A beachhead landing force that must fight it way ashore suffers a two-column leftward odds shift for that reason. If the beachhead landing force doesn't succeed in eliminating all the Taiwanese defenders in the landing hex, the game is over and the Taiwanese have won. Likewise, if a marine landing force is making an opposed landing (and don't forget the two-column leftward odds shift), it too is eliminated if it doesn't succeed in eliminating the Taiwanese force defending against its attack. Similarly, any airmobile or airborne force that has landed in a hex containing enemy should also have those combats resolved (but without the penalty odds shift). And, again, such attacking Chinese forces are also eliminated if their attack fails to eliminate the Taiwanese forces defending against their attacks.

7.0 Cyberwarfare

7.1 In General

The Cyberwar Phase represents both sides' efforts at gaining a combat advantage through the use of networked computers, the internet and the cloud.

7.2 Procedure

At the start of every turn's Cyberwarfare Phase follow the procedure described in rule 4.6. The player who wins that exchange (assuming no draw has taken place) has the temporary cyberwarfare advantage. The winning player should select the number of Cyberwarfare Point (CWP) markers from the countermix equal to his overall CWP point count. He expends those points as follows. No CWP may be saved beyond the end of the turn that takes place after the points were earned. For example, CWP earned during Turn 1's Cyberwarfare Phase would all need to be expended prior to the start of Turn 2's Cyberwarfare Phase, or else they're simply forfeit at that time.

7.3 Cyber Attack

It costs six CWP to make one cyber attack. If you have 12 or more CWP, you may decide to make two such attacks simultaneously. The effect of cyber attacks isn't felt immediately; however, during the resolution of the following turn's Cyberwar Phase your opponent rolls only two dice (or only one die if you made two attacks). The decision to launch a cyberwar attack must be announced to your opponent prior to the start of the next turn's Cyberwar Phase. There's no variability in the outcome of a cyberwar attack, simply expending six (or 12) points is enough to guarantee the outcome of the effort.

7.4 Enemy OODA Loop Disruption

To disrupt an enemy ground unit or stack, prior to the start of the next turn, you should place the desired number of your available CWP atop the unit (or stack) on the map. That is, if a CWP counter is placed atop a stack, the entire stack is affected. If the opposing player breaks up that stack during his movement phase in the following turn, place equivalent markers atop each moved away unit. Further, those disruption points would apply among all the units in any new stack that might be created when such moved away units came to rest in a new hex. The effect of each CWP on their target units/stacks is as follows.

  • For movement purposes, each CWP causes a one movement point deduction from the movement allowance that would otherwise be available to the cyberattacked unit or stack. It's possible for a unit or stack to be fully immobilized in this way.
  • For combat purposes, each one of hour CWP atop an enemy unit or stack generates a one attack factor addition to the odds calculation in any conventional (non-cyber) attack you make against that force. Similarly, any attacking enemy force that has atop it one or more of your side's CWP gives your defending force in that battle a one defense factor addition during the odds calculation process.

7.5 Friendly OODA Loop Enhancement

For the cost of one CWP you may, at any time during your opponent's movement phase in the following turn, force him to stop moving in order to allow you to interrupt his activities with a move of a unit or stack of your own. When you make such a call, your opponent is allowed to finish the move of the unit or stack he was conducting at the time of your call. If you make the call at an instant when he's clearly not in the process of conducting a particular move, he doesn't get a 'bonus' move before your call goes into effect; you simply make your phase-interrupting move and he then resumes his movement phase.

For the cost of one CWP you may, at any time during your opponent's combat phase in the following turn, force him to stop resolving his side's attacks in order to allow you to interrupt his activities with an attack of your own. When you make such a call, your opponent is allowed to finish the resolution of the or attack he was conducting at the time of your call. If you make the call at an instant when he's clearly not in the process of conducting a particular attack, he doesn't get a 'bonus' attack before your call goes into effect; you simply make your phase-interrupting attack and he then resumes his combat phase. One CWP will allow one of your units or stacks to attack; if you want it to be a multi-hex attack, you need to expend one CWP for each hex of the attacking force.

Note that the participation of your units in friendly OODA Loop enhancement operations doesn't in any way inhibit those same friendly units from also participating normally in your side's movement and combat phases that same turn.

Design Note. The phrase "OODA Loop" refers to the decision cycle of observe, orient, decide and act, as applied to the concept to the combat operations process.

7.6 Chinese Air Superiority Disruption

All the cyber attack options given above are potentially available to both players based solely on their available CWP. This option is only available to the Taiwanese player. That is, after the Chinese player has made his airpower allocations for the turn (see section 8.0), the Taiwanese player may expend CWP to remove those markers from the map at the rate of one CWP expended for one airpower marker removed. Note that Taiwanese air assault units may only move in that way during turns when there are no Chinese airpower markers on the map (see 11.18 for further details).

8.0 Chinese Airpower

8.1 In General

At the start of the Chinese Air Superiority Phase on Turns 2 through 7 that player should follow the procedure given in rule 4.4. To determine the airpower situation on Turn 1, see rule 6.4.

8.2 Airpower Marker Placement

The Chinese player may put each available airpower marker in any hexes on the map, but no more than one marker per hex. Friendly and enemy ground unit presence has no inhibiting effect on placement. All available markers must be deployed. There are never any Taiwanese airpower markers on the map, only Chinese.

8.3 Range

Every aircraft unit on the map effects the hex in which it's placed and all six of the surrounding hexes. That's termed its "range." If the ranges of two or more airpower markers overlap, there are no additive effects because of it.

8.4 Airpower's Effect on Movement

For a Taiwanese unit or stack to make a regular ground move into a hex that's in range of one or more Chinese airpower markers, it must pay an extra MP to do so for each such hex entered, for both in-hex and hexside costs. Further, no Taiwanese air assault movement may take place during turns when there are one or more Chinese airpower markers anywhere on the map (see rule 7.6). Note that Chinese airpower presence in a hex doesn't prohibit Taiwanese units making regular ground moves into and/or through such hexes; it merely makes it more expensive in terms of movement points expended per hex.

Chinese airpower markers have no direct effect on the movement of that side's forces; however, note the following two items. First, no Chinese air assault movement or air assault-type auto-supply (see 9.1 and 11.18) may take place on turns when there isn't at least one airpower marker on the map. Second, and similarly, no Chinese airborne division entry may take place on turns when there isn't at one airpower marker on the map.

8.5 Airpower in Combat

If Chinese units make an attack into a hex that's in range of one or more airpower markers, that attack gains a one column rightward shift (cumulative with all other applicable shifts). Conversely, if a Taiwanese attack is launched against a Chinese force, and that Chinese force's hex is in range of one or more airpower markers, that defense benefits from a one-column leftward shift (cumulative with all other applicable shifts). Those shifts never amount to more than one column per battle, no matter how many markers are in range.

8.6 Airpower Resilience

Deployed airpower markers remain on the map until the end of that turn, at which time they're retrieved for potential use again in the next turn. Airpower markers are never subject to elimination (but see rule 7.6). At the start of each Chinese Airpower Phase, all the markers are always available for potential use as described above and in rules 4.4 and 6.4.

9.0 Chinese Supply

9.1 In General

All Taiwanese units are always "in supply." That is, that player needn't concern himself with logistics; it's considered built into to his side's overall structure for the duration of the campaign. All Chinese units are always in supply during their respective turns of entry onto the map. Chinese marine units are always in supply when in coastal hexes. Chinese air assault units are always in supply during turns when one or more airpower markers are on the map.

9.2 Chinese Supply States

There are two Chinese "supply states," and every Chinese unit always exists in one or the other of them. A unit is "in supply" if it is one the automatically supplied types described above in 9.1 or, failing that, if it can "trace a ground supply line" to the Chinese beachhead hex. A unit that's not auto-supplied, and that's also unable to trace a complete ground supply line, is said to be "out of supply" (a.k.a. "O.O.S."). Chinese units may potentially exist indefinitely in the OOS state; no unit is ever eliminated or reduced in step-strength simply for being OOS.

9.3 Willful OOS

It's permitted for the Chinese player to deliberately move his units into hexes where they will, or likely will, become OOS.

9.4 When to Check for Supply

The Chinese player should check the supply state of each of units and stacks at the start of its movement (no matter the phase order that turn). Units found to be OOS at that time have their movement factor halved (round down any remainders) for that move.

The Chinese player should also check the supply state of each of units and stacks when they become involved in combat, either as attackers or defenders, as soon as that combat's resolution process is begun. Chinese units found to be OOS at that time have their appropriate combat factor (attack or defense) halved. Again, the general rule is to round down all remainders; however, no lone unit ever has its attack or defense factor reduced below one. In situations in which more than one unit in the same combat are to be halved, total all those units' combat factors and then calculate just one overall halving for all of them.

9.5 Tracing Ground Supply Lines

Chinese ground supply lines should be traced visually from the unit or stack in question back to the beachhead hex. Every supply line may potentially be of any length; however, they may not cross blocked mountain hexsides nor may they enter any hex containing one or more Taiwanese units. Similarly, supply lines may not be traced into or through all-sea hexes. Further, no supply line may be traced through a city hex unless that hex is under Chinese control at the time of the tracing. Note, such city hexes need not be garrisoned by Chinese units; they need only under Chinese control.

9.6 Chinese Airborne Supply

As noted above in 9.1, newly entering Chinese airborne divisions are always in supply during their turn of entry, which includes any in-hex drop combat (see 12.23 & 12.24 for details). Also recall, though, no such entries may take place during turns when there isn't at least one airpower marker on the map. Further, on turns after their initial entry into play, Chinese airborne units must trace regular ground supply lines as described above in 9.5.

9.7 Chinese Air Assault Supply

Chinese air assault units are auto-supplied on turns when there is at least one airpower marker on the map. At other times they must trace regular ground supply lines as given above in 9.5.

10.0 Chinese Reinforcements

10.1 In General

The Turn 1 entry of the initial Chinese invasion force is described in section 6.0. The entry of follow on forces in later turns is conducted under the strictures given in this section. Within the strictures below, the Chinese player is potentially allowed to bring onto the map all the units in his side's counter-mix.

10.2 Entry Onto the Map

New unit entry may take place at any number of times during the Chinese Movement Phases of Turns 2 through 7, and is entirely at that player's discretion as to exact timing within those phases. No unit entering a land hex on the map for the first time may move any farther then that hex during its turn of placement.

10.3 Marine Entry

Marine units enter by being placed, within normal stacking restrictions, in any non-mountain coastal hexes. The presence of one or more Taiwanese units doesn't prevent any otherwise eligible hex from being chosen for this purpose; however, in such cases temporarily place the marines in the all-sea hex adjacent to the chosen coastal hex and that combat is resolved. If, at the end of such an attack, all the Taiwanese units defending against this kind of marine attack haven't been eliminated, the entire attacking marine force is eliminated (which, at the same time, doesn't do away with the requirement that the defending force does suffer whatever partially eliminating result that it had suffered). Other than overall availability, there is no limit on the number of marine units that may be entered during any one turn.

10.4 Airborne Entry

During any Chinese Movement Phase, that player may select any one (never more than that) of his as yet uncommitted airborne divisions and place it in any clear terrain hex on the map. The presence of one or more Taiwanese units doesn't prevent a clear terrain hex from being chosen for this purpose; see 12.24 for details on resolving that kind of drop-hex combat.

10.5 Air Assault (Heliborne SOF) Entry

The Chinese player may select one, some, or all of his as yet uncommitted heliborne SOF groups and place them on any hexes on the island within normal stacking restrictions. The presence of one or more Taiwanese units doesn't prevent any hex from being chosen for this purpose; see 12.23 for details on resolving that kind of entry-hex combat.

10.6 Regular Ground Unit Entry

All Chinese units other than those types listed above enter the map via the beachhead hex at the rate of no more than one full stack per friendly movement phase. Units landing at the beachhead hex may neither move farther nor attack in any way during that turn.

11.0 Movement

11.1 In General

Every ground unit in the game has a movement factor printed in its lower-right corner. That factor is the number of "movement points" (also called "MP," "movement factors" and "MF") available to the unit to use to move across the hex grid during its side's movement phase in each player turn. Units move from hex to adjacent hex — no "skipping" of hexes is allowed — paying varied costs to do so depending on the type of unit moving and the terrain in, and water barriers along the sides of, the hexes being entered.

11.2 Limits

MP may not be accumulated from turn to turn or phase to phase, nor may they be loaned or given from one unit or stack to another. A player may potentially move all, some or none of his units in each of his movement phases throughout the game. Units that move aren't required to expend all their MP before stopping. The movement of each unit or stack must be completed before that of another is begun. A player may only change the position of an already moved unit or stack if his opponent agrees to allow it.

11.3 No Minimum Movement Ability

No unit may enter a given hex unless it has available sufficient MP to pay for all the involved movement costs.

11.4 Enemy Units

Your units may generally not enter hexes containing enemy ground units; see 6.6, 6.7, 10.4, 10.5, 11.18, 11.19, 12.23 and 12.24 for the exceptions.

11.5 Stack Movement

To move together as a stack, units must begin their side's movement phase already stacked together in the same hex. Units are not, however, required to move together simply because they started a movement phase in the same hex; such units might be moved together, individually, or in smaller sub-stacks.

11.6 Splitting Stacks

When moving a stack, you may halt it temporarily to allow a unit or sub-stack to split off and move away on a separate course. The units left behind in the original (or "parent") stack may then resume their own movement, even splitting off other units if desired. But once you begin moving an entirely different parent stack, or an individual unit that began in a different hex than the currently moving parent stack, you may no longer resume the movement of the earlier stack without your opponent's permission.

11.7 Different MF in Stacks

If units with different MF are traveling together in a stack, the stack must use the movement factor of the slowest unit within it. Of course, as the slower units exhaust their MF, you may drop them off and continue with the faster ones.

11.8 Terrain & Movement

All terrain features on the map are classified into two broad categories: natural and manmade. Both those categories are further divided into different types (see below). There is never more than one type of natural terrain in any one hex, but manmade terrain may exist in one hex along with one type of natural stuff.

11.9 Natural Terrain & Water Barriers

There are five types of natural terrain and hydrographic features on the map: clear hexes, mountain hexes, blocked mountain hexsides, river hexsides, all-sea hexsides, and beach hexes. The effects those various features have on movement are described below and are also summarized on the Terrain Effects Chart printed on the mapsheet for quick reference during play.

11.10 Clear Terrain

This is the "base" terrain of the game; it's devoid of any natural features that would enhance defense or slow movement at this level of operations. Each clear hex costs all units one MP to enter.

11.11 Mountain Hexes

Each mountain hex generally costs units two MP per hex entered. See 11.18 below for the exception.

11.12 Blocked Mountain Hexsides

Units using air assault movement (see 11.18 below) may cross blocked mountain hexsides at no additional cost. For all other units, in order to be able to cross such a hexside they must start their side's movement phase in a hex directly adjacent to the blocked hexside. The move across then uses up all their MP for that phase.

11.13 All-Sea Hexes & Hexsides

Except as described below in 11.17 and 11.18, no units may enter all sea hexes or cross all-sea hexsides.

11.14 River Hexsides

Rivers run between hexes, along the hexsides, rather than existing in-hex. Every river hexside may generally be crossed by all units by paying one extra MP for the crossing (exception: see 11.18 below). "Extra" means in addition to whatever movement cost is involved for the hex being moved into.

11.15 Beach Hexes

Except as given in 6.8 and 10.3 and beach (a.k.a. amphibious landing hexes) have no special significance and are otherwise defined by the terrain in them rather than their location along the coast.

11.16 Cities

Manmade terrain exists in one type: cities. The movement cost for entering city hexes is two MP for each such hex entered.

11.17 Chinese Marines Coastal Movement

When moving via inland hexes, Chinese marine units move as regular ground units with an MF of "4." If a Chinese marine unit begins its side's movement phase on a non-mountain coastal hex, it may move to any other non-mountain coastal hex, via an all-sea-hex path, at the cost of one MP per hex, to any other non-mountain coastal hex within eight MP. Such units would have to pay two MP to land in a city hex. No marine unit may end it's move at sea unless it's preparatory to making an amphibious assault as described in 12.25. This kind of movement is never available to Taiwanese marine units.

11.18 Air Assault Movement

If a moving force consists only of one or more air assault units (se 2.6), that force pays only one MF per hex, no matter the in-hex terrain involved, and such forces don't pay any water hexside crossing costs. Units using such movement may even "fly over" all-sea hexsides and hexes, as well as hexes containing enemy units at a cost of only one MF per hex. Also note, if one or more air assault units is moving within a force that also contains one or more non-air-assault units, those air assault units may themselves only make use of regular movement (and its attendant costs) during that move.

If an air assault unit or stack ends a move in a hex containing one more enemy units, air assault combat must take place in that hex immediately (see 12.23 for details on that).

On the Taiwanese side, as a further stricture to all the above, air assault units may only use such movement during friendly movement phases when there are no Chinese airpower markers on the map.

Within these strictures, air assault units may make any number of air assault moves per game. Also note, however, column movement (see 11.20 below) is never available to air assault units, and air assault and regular movement may not be combined during the same phase. When air assault movement is unavailable to those units, they may then still move using regular ground movement and ground supply tracing.

11.19 Chinese Airborne Entry Movement

Each Chinese airborne unit may only make use of this special kind of entry movement, so there will never be more than three such moves made per game. For details see 6.6, 10.4 and 12.24. At all other times, Chinese airborne units move as regular ground units.

11.20 Column Movement

Taiwanese units, and supplied (auto-supplied OK) Chinese units that don't begin their side's movement phase adjacent to one or more enemy units, and that then conduct their entire regular ground move such that they never come adjacent to any enemy ground unit nor end their move adjacent to any enemy ground unit, may make that move using up to twice their printed MA. On the Taiwanese side, there's a further restriction in that column-moving units may not enter the range of any Chinese airpower marker. Within the strictures given above, this kind of move remains available to Chinese units during turns when there are no airpower markers on the map.

11.21 Cumulative Costs

The total movement cost for entering any hex is always the sum of all the applicable hex and hexside costs involved. For example, a unit crossing a river hexside into a mountain hex would pay a total of three MP to do so. That is, two MP to enter the mountain hex and one extra MP to cross the river hexside.

11.22 No Off Map Movement

No unit once in play on the map may be moved off it except when eliminated in combat.

12.0 Combat

12.1 In General

Attacks generally take place between adjacent opposing units during the combat phase in every player turn. Attacking adjacently is always voluntary; the mere fact of enemy adjacency doesn't necessitate your units launch attacks against them. Both players are generally free to attack or not, as each chooses on a case by case basis, during his own side's combat phases throughout the game. (For the exceptions to those three statements, see 6.5, 6.6, 6.7, 6.8, 10.4, 10.5, 11.18, 11.19, 12.23, 12.24 & 12.25.)

The player whose player turn it is, is considered the "attacker," and the other player is considered the "defender," no matter the overall situation across the map.

12.2 Multiple Defenders in One Hex

If there are two or more enemy units in a hex being attacked by your units, you may only attack that stack as if it were one large and combined defending unit.

12.3 Multi-Hex Attacks

An enemy occupied hex may be attacked in one battle by as many of your units as you can bring to bear from one, some, or all the surrounding hexes; however, no more than one hex may ever be the object of any one attack. For example, a unit in hex 1723 may not attack into both 1722 and 1823 during the same phase. See 12.6 below for more details.

12.4 Indivisibility of Units

No single attacking unit may have its attack factor divided and applied to more than one battle during any single phase. Likewise, no defending unit may have part of its defense factor attacked by one or a few attackers while another part is attacked by others. No attacking unit may attack more than once per combat phase, and no defending unit may be attacked more than once per combat phase.

12.5 Attack Sequencing

There is no arbitrary limit on the number of attacks each player may resolve during his combat phases. The attacker need not declare all his attacks beforehand and he may resolve them in any order he wishes, as long as the resolution of one is completed before that of the next is begun.

12.6 Stacks Attacking

It's not necessary for all the units you have stacked in a given hex to participate in the same attack. Some of the units in a stack might attack into one defender hex while others attacked into some others or didn't attack at all. No defending unit may ever refuse combat; all units in an attacked hex must participate in its defense.

12.7 Combat Procedure

Normally the attacking player should strive to have several times more attack factors involved in a battle than the defender has defense factors. Such battles are called "high odds" attacks. To resolve such fights, the attacking player begins by calculating his "odds." Do that by adding together the attack factors of all the attacking units involved in the battle; then add up the defense factors of the enemy units defending in the battle. Divide the defender-total into the attacker-total and round down any remainder. For example, if 26 attack factors attack 7 defense factors, the situation yields an odds ratio of 3:1 ("three to one"). That is, 27÷7=3.71, which rounds down to 3. To turn that "3" into a ratio, you must set a "1" next to it on the right. Thus "3" becomes "3:1," which corresponds to a column-heading on the Combat Results Table (CRT) printed on the mapsheet.

12.8 Poor Odds Attacks

Battles in which the attacking force has fewer combat factors than the defender are called "poor odds attacks." Procedures in such situations are modified from what's described above in that here you divide the defender's total by the attacker's, round up all remainders, and set the "1" on the left side of that result. For example, if a force with 5 attack factors is attacking a force with 11 defense factors, it's a poor odds attack. In that case, divide 11 by 5 (11÷5=2.2), and round up (2.2 becomes 3); then set a "1" on the left of that "3," yielding odds of 1:3 ("one to three").

12.9 CRT Odds Limits

Note the column headings on the CRT range from 1:3 to 6:1. Final odds greater than 6:1 are resolved using the 6:1 column, but with a one added to the rolled result for each odds multiple above 6:1. For example, at odds of 8:1, you'd roll on the 6:1 column but, no matter what you rolled, you'd then add two to that result. Odds less than 1:3 are resolved without a die roll; their results are always "3/0."

12.10 Clear Terrain Hexes

Units defending in clear terrain hexes that are devoid of all other terrain features derive no benefit to their defense.

12.11 Mountain Hexes

When units attack defenders in a mountain hex, those attackers suffer a one-column leftward odds shift for doing so.

12.12 Blocked Mountain Hexsides

No combat is ever allowed across these hexsides.

12.13 River Hexsides

If every attacking unit in a battle is attacking across a river hexside, and non of them are air assault units the defenders in that battle suffer a one column left odds shift for doing so. Note that this river shift is applied in addition to any applicable shifts for in-hex terrain. Also note that if one or more of the attacking units is attacking through a non-river hexside, or one or the attacking units is an air assault unit capable of making an air assault type move during that turn (see 11.18) the river shift is thereby neutralized.

12.14 All-Sea Hexsides

Combat across all-sea hexsides is only allowed as described in 6.5, 6.8 and 12.25.

12.15 Amphibious Landing (Beach) Hexes

When attacked solely from land hexes, beach hexes have no special status. For details about attacking such hexes amphibiously from the see, see 12.25.

12.16 Cities

Units attacking into city hexes suffer a two column leftward odds shift for doing so. Further, both sides have their rolled combat result increased by one (zeroes become ones).

12.17 Final Combat Resolution

After the CRT odds column has been determined and all applicable shifts have been applied, the attacker rolls a die and cross-indexes that result within that odds ratio column to get a "combat result." For example, a die roll result of "3" rolled for an attack made at 3:1 odds yields a combat result of "1/2" on the CRT.

12.18 Combat Results

Combat results are always given in terms of steps lost by the involved units of one or both sides. The number printed to the left of each result's slash applies to the involved attacking units; the number printed to the right of the slash applies to the involved defending units. For example, a combat result of "2/3" would mean the involved attacking units must lose a total of two steps, while the involved defending units must lose a total of three steps. Notice the numbers in a combat result represent the grand total of step losses that must be suffered by the involved units of each side; they don't represent the number of steps every involved unit must suffer. In each battle the defender must always completely absorb his combat result before the attacker absorbs his. There is never any carry over of a combat result from one battle into any other battle or phase. Any combat losses in excess of the step strength of the units involved are ignored.

12.19 Zero Results

Combat results of zero ("0") means the involved force of that side are entirely unaffected; there are no step losses for that side.

12.20 Enveloping Attacks

When a defended hex is attacked by units from hexes directly opposite each other, or by units from three hexes with one hex between each attack hex and the next, or by units from more than three hexes, that defending force has been "enveloped." Shift those odds one column right. The presence of other units of the defending side in hexes next to the defending force being enveloped doesn't serve to negate this shift.

12.21 Apportioning Step Losses

The Taiwanese player is always free to apportion his side's step losses among his involved attacking or defending units as he sees fit. The Chinese player must use the following stricture: in any battle no involved Chinese unit may suffer a second step loss before every involved Chinese unit has suffered one step loss. In other words, this rule requires the Chinese player to spread his losses among his involved units as evenly as possible. For example, say a Chinese force contained three multi-step units, and the combat result called for that force to lose four steps. The Chinese player would first be required to have each of those three units absorb one step loss; he could then assign the fourth step loss to any involved unit he chose.

12.22 Advance-After-Combat

At the end of every attack, whenever the defender's hex is left vacant of defenders, the victorious attacking units may advance-after-combat into that hex. Stacking limitations must be observed. Such advances aren't part of normal movement, and they don't cost any MP, but advancing units must still observe normal terrain prohibitions. Advancing-after-combat is an option; it's never mandatory. The decision to advance must be made immediately after the battle is resolved and before that of another is begun. It's not necessary for advancing attackers to stack-full the newly won hex; the victorious player may send just one or a few units. There is never any defender advance-after-combat; victorious defenders simply hold their place.

12.23 In-Hex Air Assault Combat

Units able to make air assault moves (see 2.7, 5.2 & 6.7) are allowed to end those moves in hexes containing enemy units. In such situations normal combat procedures are followed except as follows.

  • These types of battles are resolved immediately as each one occurs, each as a special sub-step within that movement phase.
  • In-hex terrain shifts apply, but not hexside shifts.
  • If all of the defending force beneath an attacking air assault force isn't entirely eliminated, the entire air assault force is then eliminated. Any combat result against the defending force would still also need to be applied.
  • Air assaulting units may never be assisted in their attack by friendly units from outside the jointly-stacked hex. At the same time, though, air assault qualified units aren't required to make every one of their attacks using that tactic. When attacking regularly across hexsides during the combat phase, they may make joint attacks with other friendly units of all types. Also see 12.13 above.
  • Assuming an air assault force made and at least partially survived one of this kind attack during a turn in which its side's phase sequence was its movement phase followed by its combat phase, the already engaged air assault units aren't allowed to attack again in any way during that combat phase.

12.24 In-Hex Airborne Assault

Chinese airborne divisions may be air dropped into hexes containing Taiwanese units (see 2.7, 5.2 & 6.6). In such situations normal combat procedures are followed except as follows.

  • These types of battles are resolved immediately as each one occurs, each as a special sub-step within that movement phase.
  • In-hex terrain shifts apply, but not hexside shifts.
  • If all of the defending force beneath an attacking airborne division isn't entirely eliminated, the airborne division is then eliminated. Any combat result against the defending force would still also need to be applied.
  • Airborne divisions attacking in this way may never be assisted in their attack by friendly units from outside the jointly-stacked hex. At the same time, though, airborne divisions aren't required to make their entries into Taiwanese-occupied hexes. When attacking regularly across hexsides during the combat phase, they may make joint attacks with other friendly units of all types.
  • Assuming an airborne made and at least partially survived one of this kind attack during a turn in which its side's phase sequence was its movement phase followed by its combat phase, the already engaged air assault units aren't allowed to attack again in any way during that combat phase.

12.25 Amphibious Attack Penalty

Whenever Chinese units attack into beach hexes as described in rules 6.5, 6.8 and 11.17, those attacking forces suffer a two column leftward odds shift for doing so. Such attacks are the only times units may temporarily end a move in an all-sea hex, and only until their special attacks are resolved. If an attack of this type is assisted by friendly units attacking the landing hex from other land hexes, the column shift penalty is reduced to just one column leftward. In all over-the-beach attacks, if the defending Taiwanese force isn't fully eliminated all the involved Chinese units are eliminated (which doesn't let the Taiwanese off the hook in regard to absorbing the combat result they did get).

12.26 Taiwanese Reserve Brigades Attacking

Whenever a force containing one or more Taiwanese reserve units (see 2.5) attacks, all those participating reserve units are thereby automatically eliminated. Further, that auto-elimination doesn't in any degree work to satisfy the regularly obtained Taiwanese portion of the combat result for that attack.

Terrain Effects Chart

Terrain TypeMovement CostCombat Effect
Clear Hex1No Effect
Mountain Hex2Shift Odds One Column left.
Blocked Mountain HexsideSee 11.12No combat across.
River Hexside+1Possibly shift odds one column left; see 12.13.
All Sea HexsideSee 11.13See 12.14.
Amphibious Landing (Beach) HexSee 11.15See 12.15.
City Hex2Shift odds two columns left & increase both sides' losses by +1.

Combat Results Table

Die Roll1:31:21:12:13:14:15:16:1
13/02/01/01/01/11/21/20/3
22/01/01/01/11/11/20/30/3
31/01/01/11/1

Odds greater than 6:1 have a die roll modifier of +1 for each ratio beyond 6:1. Odds worse than 1:3 have automatic 3/0 results.

Turn Sequence

  • I. Chinese Air Superiority Phase
  • II. Chinese Movement or Combat Phase
  • III. Chinese Combat or Movement Phase
  • IV. Taiwanese Movement or Combat Phase
  • V. Taiwanese Combat or Movement Phase
  • VI. Mutual Cyberwar Phase
  • 11.13 All-Sea Hexes & Hexsides
  • 11.14 River Hexsides
  • 11.15 Beach Hexes
  • 11.16 Cities
  • 11.17 Chinese Marines Coastal Movement
  • 11.18 Air Assault Movement
  • 11.19 Chinese Airborne Entry Movement
  • 11.20 Column Movement
  • 11.21 Cumulative Costs
  • 11.22 No Off Map Movement
  • 12.13 River Hexsides
  • 12.14 All-Sea Hexsides
  • 12.15 Amphibious Landing (Beach) Hexes
  • 12.16 Cities
  • 12.17 Final Combat Resolution
  • 12.18 Combat Results
  • 12.19 Zero Results
  • 12.20 Enveloping Attacks
  • 12.21 Apportioning Step Losses
  • 12.22 Advance-After-Combat
  • 12.23 In-Hex Air Assault Combat
  • 12.24 In-Hex Airborne Assault
  • 12.25 Amphibious Attack Penalty
  • 12.26 Taiwanese Reserve Brigades Attacking
  • 1/2
    0/2
    0/3
    0/3
    41/01/01/11/20/20/30/30/4
    51/01/11/20/20/30/30/40/5
    ≥ 61/11/20/20/30/30/40/50/6