High Gear
High Gear Rulebook
Table of Contents
Table of Contents
- Contents
- Object of the Game
- Prepare to Play
- How to Take Your First Turn
- Be Sure to Enter All Your 4 Pegs
- Deciding in Which Direction to Dial Your Move
- Extra Turns
- Taking Less Moves Than You Spin
- Moving Your Pegs Ahead to Next Gear
- Moving Other Player's Pegs Ahead
- Special Examples of Moving Your Peg Ahead
- Sending Another Player's Peg Back to a Lower Gear
- "Double Jump" Move
- Getting On to High Gear
- Special Free Choice Moves
- Winner
- Playing Hints
- For "Drag Race" Game, Add These Rules
Contents
3-D High Gear Game; 20 pegs in 4 colors (in storage box under label).
After you study the High Gear mechanism and learn the names of the parts, read the rules through once briefly, then read them again step by step as you play your first game.
Object of the Game
The object of the game is to be the first player to get all four of one's pegs from the "Start" on Gear No. 1 up to "High Gear." The pegs are moved forward by turning the Dial Gear ONLY. "Turning the High Gear" and "Holding the Clutch" are special moves that are useful later on in the game.
Prepare to Play
- Slide open the storage box (under label). Each player takes 4 pegs of one color (the extra pegs are in case of loss).
- Line up any one "tooth" of the Dial Gear just below the black STOP.
- Line up the Pointer on Clutch opposite any one tooth on Gear #5 (Ring Gear).
- Red player goes first, then player on his left.
How to Take Your First Turn
Follow these steps:
Step 1: On Gear No. 1, place ONE peg in the empty hole next to the START arrow. (After placing peg, do NOT move Gear No. 1. No other players may place pegs on your turn.)
Step 2: Spin the Spinner on top of the Dial Gear. What number does the STOP point to?
Step 3: Decide which way you want to turn the Dial Gear, to the RIGHT or to the LEFT. Find your number on THAT side of the Dial Gear.
Step 4: Dial your number (exactly like a telephone) by putting your finger in that number space and pushing the gear all the way to STOP.
See how your peg moved exactly the number of "spaces," or gear teeth, in the direction you chose! (Each "tooth" counts as one "space" of your move.)
NOW it is the next player's turn. He should follow the SAME 4 steps given above.
Be Sure to Enter All Your 4 Pegs
On your SECOND turn, enter another peg in the empty hole next to START arrow. Then spin the spinner for a number, and dial it on the Dial Gear, as you did on your first turn. (Steps 2, 3 and 4 above.)
On your THIRD turn, enter your 3rd peg, on your FOURTH turn, your 4th peg.
If there is a peg (of any color) ALREADY in the hole opposite START, you can't enter a peg but you can spin for your regular turn and move any of your pegs already on gears. Wait till your next turn to enter a new peg.
Deciding in Which Direction to Dial Your Move
On each turn, you can CHOOSE in which direction to turn the Dial Gear. BUT once you start turning the gear, you MUST finish in that direction. Here's a CHART which shows how the gears will move. Look at it before you take your turn.
[Chart: diagrams of the High Gear and Dial Gear for dialing to the left and to the right, showing the START, POINTER, RING GEAR, STOP and CLUTCH positions.]
When you turn the Dial Gear in the direction of big arrow, the gears will rotate as shown by small arrows.
The "High Gear," the "Clutch" and No. 6 gears will move ONLY on special "Free Choice" moves, explained later. These moves are more useful later in the game.
Extra Turns
The INSIDE circle of the Spinner gives directions for special "free choice" moves, to be explained later. It also has "EXTRA TURN." When you spin for your number and that number falls within the purple EXTRA TURN section of the spinner, you may take another turn. But you can't take more than two extra turns at one time.
Taking Less Moves Than You Spin
If you wish, you always can take LESS moves than you spin on the spinner, and forfeit (give up) the rest of your moves. But, you must TELL THE OTHER PLAYERS what you intend to do.
Example: Player spun a 6. He said: "I'm going to take only 4 moves out of my 6...and give up the other 2 moves." So he put his finger in a "4" space on the Dial Gear and moved his peg just 4 spaces.
Note: You must always move at least ONE space (tooth) on your turn.
Moving Your Pegs Ahead to Next Gear
Step 1: At the END of each turn, look at your peg. Is it lined up exactly opposite an empty hole on the NEXT GEAR (gear that is one number higher)? It must line up right at the point where the two gears LOCK CLOSELY together... like this:
[Diagram: a red peg lined up opposite an empty hole on the next gear.]
Step 2: IF your peg IS lined up as shown above, you CAN move it up into the empty hole on the next gear.
Check ALL your pegs, in the same way. Move them ahead if you can.
Moving Other Player's Pegs Ahead
At the end of your turn, look at all the other players' pegs. If another player's peg is lined up opposite an empty hole on the next gear, you MUST move it up into that empty hole just as you move up your own. (See picture above.)
Example: Red player's peg lines up exactly opposite Yellow's peg on next gear. He gave that yellow peg back to Yellow player, and put his own peg into the empty hole.
[Diagram: red and yellow pegs on adjacent gears, with the NEXT GEAR arrow.]
NOTE: If, at the end of your turn, two pegs belonging to other players are lined up opposite each other, neither peg is moved.
Special Examples of Moving Your Peg Ahead
A. If, at the END of your turn, your peg is lined up exactly opposite one of your OWN pegs on the next gear, move that peg to an adjoining hole (on the same gear), and then move up your other peg into the empty hole.
[Diagram: Red peg A is moved to adjoining hole, Red peg B moves up into empty hole.]
B. If, at the END of your turn, your peg is lined up exactly opposite another player's peg on the next gear, give that peg back to its owner, and move your OWN peg up in that empty hole. The opponent must re-enter his peg at START on his next turn of play, or as soon as he is able.
Sending Another Player's Peg Back to a Lower Gear
If, at the END of your turn, another player's peg is lined up exactly opposite an empty hole on the LOWER gear (gear with next lowest number) you send it back into that empty hole. Like this:
[Diagram: a peg on the lower gear being sent back into an empty hole.]
When that other player takes his next turn, he cannot move his sent-back peg UNTIL he has taken his turn of play.
NOTES:
-
If another player's peg was on a gear that DID NOT move when you took your turn, you can NOT send it back to a lower gear. (For example, another player's peg on the No. 6 gear which did NOT move when you dialed your move.)
-
ONLY THE PLAYER WHOSE TURN IT IS MAY ADVANCE OR SEND BACK PEGS... and only at the END of his turn. But other players must keep watch to see that he moves their pegs ahead, when he should.
"Double Jump" Move
If at the end of your turn, a peg of yours (or another player's) on Gear No. 4 is lined up EXACTLY with an empty hole on Gear No. 5 (the "ring" gear) AND an empty hole on a No. 6 Gear, it may be advanced up into the empty hole on Gear No. 6. If another player's peg is in the lined-up hole on the No. 6 Gear, AND the No. 6 Gears have moved on your turn, you may send that peg back to start and advance your own peg into that hole on No. 6.
In the same way, if another player's peg on a No. 6 Gear is lined up with an empty hole on the No. 5 gear AND an empty hole on a No. 4 Gear, it may be sent BACK to that empty hole on No. 4, IF the No. 6 Gears have moved on your turn. Like this:
[Diagram: No. 6, No. 5 and No. 4 gears.]
Getting On to High Gear
When a peg on any one of the three No. 6 Gears lines up exactly opposite an empty hole on High Gear, it may move up into that hole. NO PEG CAN BE SENT BACK ONCE IT HAS REACHED HIGH GEAR. Pegs that reach High Gear stay there, but must move out of the way (to any other hole on High Gear) whenever another peg can advance to its position.
[Diagram: peg reaches High Gear, showing High Gear, No. 6 and Clutch.]
Special Free Choice Moves
Look at the inside circle of spinner. It has 3 SPECIAL MOVES. You already know about getting an "EXTRA TURN."
In the same way you can get a chance to "TURN HIGH GEAR" or "HOLD CLUTCH." Each one is a "free choice" move. This means you can use it, OR take your regular turn on the Dial Gear.
How to Turn High Gear
If you spin a number WITHIN the gray area on spinner marked TURN HIGH GEAR, you can turn the High Gear INSTEAD OF THE DIAL GEAR. This will turn all the No. 6 Gears (while the other gears STAY STILL).
- Take hold of High Gear knob. Decide in which direction you want to turn it.
- Turn knob slowly, watching the Pointer on "Clutch."
- Count out your move with the Pointer, moving it from tooth to tooth on inner edge of Ring Gear No. 5. Each tooth counts for 1 "space" of your move.
Example: Player spun a 5. He turned the High Gear until Pointer on the Clutch moved 5 "teeth" or "spaces." So did his peg on the No. 6 Gear. Inner Tooth of Ring Gear counts for "1" space of your move.
[Diagram: High Gear, No. 6 gear and Clutch with pointer on Clutch.]
How to Hold Clutch
If you spin a number WITHIN the blue area on the spinner marked HOLD CLUTCH, you can hold the Clutch WHILE YOU DIAL YOUR NUMBER ON THE DIAL GEAR. This will make ALL the gears of the game revolve, INCLUDING the three "No. 6" Gears.
- With one hand, PRESS DOWN FIRMLY any ONE of the 3 Pointers on the Clutch.
- AT THE SAME TIME, with the OTHER hand, dial your number move (left or right) on the Dial Gear, just as you do on a regular move.
[Diagram: DIAL your move with one hand... while you hold Clutch with the other hand.]
[Diagram: How all the gears turn when you "Hold the Clutch" and dial to the right, or dial to the left.]
NOTE: On either "Free Choice" move you can take less moves than you spin, but you must make at least ONE move.
Winner
The first player to get all of his 4 pegs onto the High Gear is the winner.
For a SHORT GAME, each player plays with only 2 pegs. The first player to get his two pegs onto High Gear is the winner.
When only 2 players play, each may play with 6 pegs. The first to get 3 pegs up onto High Gear is the winner.
STORE PEGS IN STORAGE BOX, WITH LID CLOSED, BETWEEN GAME SESSIONS.
Playing Hints
Before you take your turn, be sure to enter any peg of yours still not in the game. Before you turn the Dial Gear or High Gear, be sure you are taking your move in the best direction. Check the charts given above. At the end of your move, check ALL pegs. Be sure to advance all of your pegs and send back all the other players' pegs if you can! Make lots of use of the TURN HIGH GEAR and HOLD CLUTCH moves, when pegs have advanced to the No. 5 Ring Gear and the No. 6 Gears.
For "Drag Race" Game, Add These Rules
This is an optional variant printed at the foot of the sheet.
Split Moves:
A. You can take one part of the move you spin in one direction, and the other part in the opposite direction. For example, if you spin a 6 on the spinner, you can turn the Dial Gear 4 spaces to the LEFT, and 2 spaces to the RIGHT.
B. You cannot forfeit any part of your move.
C. If you spin HOLD CLUTCH, you can split your move and hold the Clutch ON ONLY ONE PART of your move, OR on BOTH PARTS of your move. You may split a TURN HIGH GEAR move in the same way.
You can advance or send back pegs at the end of EACH part of a split move. You MUST send back your OWN peg if it lines up exactly with an empty hole on a LOWER gear.