Heroes of the Pacific
Heroes of the Pacific Rulebook
Table of Contents
Table of Contents
1 - Units & Recruitment
Units are the core elements of your army. A Unit can represent a group of soldiers, vehicles, or individual characters under your command. Every Unit has a Defense Value, a Movement Value, and several Combat Values.
Units are split into three groups, each having a colour-coded Defense Value: Yellow shield for Infantry Units, Purple shield for Light Vehicles, and Grey shield for Heavy Vehicles. Some Units also have one or more Special Abilities. All of a Unit's stats and abilities are shown on the two sides of the Unit Counter.
1.1 - Units
Infantry Units
These counters represent groups of soldiers and may also represent Units equipped with specific gear such as machine-guns, antitank weapons, cannons, etc. Their Defense Values are printed inside a Yellow shield.
Most Units show their full strength on the front side of their counter while the reverse side depicts them at reduced strength after suffering a Hit.
Sometimes, the Defense Value of a Unit that has been Hit will be higher, since there are fewer soldiers left, so it is harder to successfully attack them.
Figure: MARINES squad at full strength (Unharmed Side, front) and after suffering a Hit (Reduced Side, back).
In some cases, the two sides of a counter represent the same Unit, but in different States. Typically, these are Heavy Weapons that have to be set up before they can be used. The two sides of these counters are referred to as the Active and Inactive Sides.
Figure: TYPE 92 HMG squad in movement and in position (Inactive Side, front; Active Side, back).
Figure: M1941 LMG squad in movement and in position (Inactive Side, front; Active Side, back).
Figure: FUKUHEI squad revealed and concealed (Inactive Side, front; Active Side, back).
A Bigger Gun: Some Infantry Units, such as guns, are slightly bigger than one square but are considered to occupy only one square.
Battlefield Role: Each Infantry Unit is trained to fill a certain role during a firefight, which is indicated on the counter by the outline: the faction's colour for regular soldiers; Red for Heavy Weapons; and Yellow for leaders.
Infantry Unit: M. Haney (annotated counter)
- Unit Name: When printed in red, indicates the counter has suffered a Hit. Here, the counter is on its Unharmed Side.
- Division Badge / Army Symbol: This token is part of the 2nd Marines Division.
- Special Abilities: This counter has several Special Abilities represented by symbols: NCO, Charge and Assault +1.
- Combat Value Against Light Vehicles: This Combat Value gives the Unit a +1 to its attack rolls against Light Vehicles (any target whose Defense Value is printed inside a Purple Shield).
- Movement Value: This counter can move 4 squares.
- Outline: Yellow, indicates this counter is an Officer.
- Hit: This symbol means that the counter must be turned over if it suffers a Hit.
- Combat Value Against Infantry Units: This Combat Value gives the Unit a +2 to its attack rolls against Infantry Units (any target whose Defense Value is printed inside a Yellow Shield).
- Defense Value: This counter is an Infantry Unit, so its Defense Value is printed inside a Yellow Shield. During a Firing Action, it suffers one or more Hits when an opponent's roll plus appropriate Combat Value is 6 or higher.
- Combat Value Against Heavy Vehicles: X means this counter can deal no damage to Heavy Vehicles (any target whose Defense Value is printed inside a Grey shield).
Light Vehicles
These Units include transport, recon, and support Vehicles. Depending on type, their counter size may either equal that of an Infantry Unit, be slightly bigger or even occupy two squares. On the game board, always center the counter on the square or squares that it occupies. Light Vehicles have light armour, if any. Their Defense Values are printed inside a Purple shield. Light Vehicle counters are double-sided. On one side, the Unit is in perfect working order. On the other side, it has been reduced to a Wreck.
Figure: Example of a Light Vehicle occupying one square, centered on the square that it occupies.
Figure: Example of a Light Vehicle occupying two squares.
Light Vehicle: LVT 1 Alligator (annotated counter)
- Division Badge / Army Symbol: This counter is part of the US Marine Corps.
- Unit Name: Name of the Vehicle.
- Movement Value: This counter can move 3 squares.
- Outline: Used to indicate the vehicle nationality, in this case American (Green outline).
- Special Abilities: This counter has several Special Abilities represented by symbols: Amphibious, Transport (7), Machine Gunner, Suppressive Fire and Fire on the Move (-2).
- Combat Value Against Light Vehicles: This Combat Value gives the Unit a +3 to its attack rolls against Light Vehicles (any target whose Defense Value is printed inside a Purple Shield).
- Hit: This symbol means that the counter must be turned over if it suffers a Hit.
- Combat Value Against Infantry Units: This Combat Value gives the Unit a +3 to its attack rolls against Infantry Units (any target whose Defense Value is printed inside a Yellow shield).
- Defense Value: This counter is a Light Vehicle, so its Defense Value is printed inside a Purple shield. During a Firing Action, it suffers one or more Hits when an opponent's roll plus appropriate Combat Value is 7 or higher.
- Combat Value Against Heavy Vehicles: X means this counter can deal no damage to Heavy Vehicles (any target whose Defense Value is printed inside a Grey shield).
Heavy Vehicles
WARNING: There is no Heavy Vehicle in the Core Box. You will find them in the Battle Pack #1 - Tokyo Express.
Usually much larger than Infantry Units, these Units include tanks and other armoured Vehicles. Heavy Vehicles have thick armour that makes them immune to most personal arms carried by Infantry Units, so they rule over the battlefield. But they can be vulnerable to special weapons. Their Defense Values are printed inside a Grey shield. Counters may occupy one or more squares, depending on size. On the game board, always center the counter on the square or squares that it occupies. Heavy Vehicle counters are double-sided. On one side, the Unit is functional. On the other side, it has been reduced to a Wreck.
All Heavy Vehicles have one or more Primary Weapons, which have Combat Values and Special Abilities (outlined in Red). Most also have a Secondary Weapon (outlined in Yellow). Some Heavy Vehicles only have one weapon, in which case it is both their Primary and Secondary Weapon.
Heavy Vehicle: Type 97 Chi-Ha (annotated counter)
- Division Badge / Army Symbol: This token is part of a Japanese Tank Battalion.
- Defense Value (Front): 7.
- Defense Value (Side): 6.
- Unit Name: Name of the Vehicle.
- Movement Value: This counter can move 4 squares.
- Primary Weapon: This weapon's Combat Value gives the Unit a bonus to its attack rolls: +2 against Infantry Units, +3 against Light Vehicles and +2 against Heavy Vehicles. This weapon also has the Destruction (1) Special Ability.
- Secondary Weapon: This weapon's Combat Value gives the Unit a bonus to its attack rolls: +3 against Infantry Units, +2 against Light Vehicles and X against Heavy Vehicles. This weapon also has the Machine Gunner, Suppressive Fire and Fire on the Move (-2) Special Abilities.
- Outline: Used to indicate the vehicle nationality, in this case Japanese (Brown outline).
- Defense Value (Rear): This counter has 4 Defense Values, printed inside Grey shields as it is a Heavy Vehicle. It suffers damage when an opponent's roll plus appropriate Combat Value is 7 or higher if attacked from the front, 6 or higher if attacked from the side, and 6 or higher if attacked from the rear.
Destruction of Vehicles
Once a Vehicle (Light or Heavy) is Destroyed, it becomes a Wreck that counts as a terrain tile. A Wreck is a Structure that can be removed from the battlefield provided some conditions are met.
1.2 - Recruitment
Building an army is easy in Heroes of the Pacific thanks to the different Recruitment Tiles. They can represent an entire combat group, or a single Character such as an important Leader or Hero.
Recruitment Tiles
A Recruitment Tile shows which Unit counters, known as a combat group, and Markers you may deploy during a battle when that tile is part of your army. Many Recruitment Tiles also have one or more Slots for Recruitment Options. Some Recruitment Option slots can only be used for Options that are restricted to a specific Recruitment Tile, while others can be used for any option available to your army. The colour stripes that surround the Recruitment Option Slots indicate which options can be placed there. Some Recruitment Tiles provide Markers (such as Gear); they can only be used by the Units shown on the Recruitment Tile.
Recruitment Tiles have Organization Attachment Arrows where they can be linked to other Recruitment Tiles so that all the recruitment tiles form a single "Company" that can be led by a Tactical Command, which can provide Options and Doctrine Cards to some parts of the Company.
Recruitment Tile: Rikugun Rifle Platoon A (annotated tile)
- Special Ability: This bonus is only granted if the slot right below holds a Recruitment Option. In some cases, it only affects the Recruitment Option. If the Recruitment Option tile is face down because it has reached its breaking point, you lose this Special Ability.
- Symbols: They provide historical details. They can be the faction flag, the army badge (here Imperial Army), the division patch, or the rank of the officer represented on the tile.
- Breaking Point: When this many of the tile's inherent counters have been destroyed (here 2 out of 3), your opponent scores Victory Points for this tile (the number of victory points is printed in red on the back of the tile). You can read more about this in the Chapter Free Battle Mode (see Scenarios booklet, p.17).
- Name: The name of the combat group the tile represents.
- Organization: These Organization Arrows are used to create armies (see Scenario Booklet, p.17).
- Composition of the Combat Group: The number and type of counters in the combat group. In the present case, Chu-i Ho, a 5cm Mortar and a Support Group. The magnified star over the Officer's picture is just a reminder of its Special Ability.
- Option Stripes: Each slot is surrounded by colour stripes that define which Recruitment Options it can receive. Gold and White stripes are specific for this platoon only, as each combat group and its affiliates are distinguished by their exclusive set of stripes.
- Cost: Expressed in Army Points. Some scenarios let you build your army by spending Army Points (see Scenario Booklet, p.16).
Command Tiles
Recruitment Tiles with a title framed by badges on a laurel background are called Command Tiles.
Figure: 18th Div. Hohei Rentai Hombu Command Tile.
The Options granted therein benefit the entire army.
Tactical Command Tiles
Recruitment Tiles with a title framed by badges, one of which is on a laurel background, are called Tactical Command Tiles. They have only one Organization Arrow on the right border. They may provide Doctrine Cards.
Figure: HQ Rifle Company Tactical Command Tile.
The Tactical Command Tile can be linked via Organization arrows to create a Company. This means the Tactical Command's Doctrine Cards and assigned Options are available to any Unit whose Coloured Stripes match those of any Recruitment Tile within that Company (see 8 - Recruitment Options, p.32).
Heroes & Characters
Characters may be simple soldiers, famous heroes, or field leaders. Some Recruitment Tiles have "supporting role" Characters, such as an Officer (yellow outline), as part of the combat group, while more powerful "leading role" Characters are portrayed on their own Recruitment Tile. There is no game rule difference between the two types of Characters.
Figure: Lt. Haney and Sgt. Hattori Takashi leading-role Character tiles.
Recruitment Options
You can add Recruitment Options to Recruitment Tiles. The options are either Infantry Units, Vehicles, Additional Gear, Character Traits, Order Options or Customizations (see 8 - Recruitment Options, p.32). Like Recruitment Tiles, Recruitment Options have a cost value in Army Points.
Colour Stripes
Each Recruitment Option slot is framed by colour stripes, and an option can only be placed in a slot that accepts it:
- They can be specific to a Recruitment Tile and have the same colour stripes.
- Figure: Colour stripes specific to a Recruitment Tile. Americans (USMC Rifle Platoon A) / Japanese (Rikugun Rifle Platoon A).
- Command colour stripes: Figure: Command colour stripes for Americans / Japanese (Planning +1, Battle Plan +1, Artillery X3, Aircraft SP X1 options).
- They can be generic and have army common stripes.
- Figure: Generic colour stripes for Americans / Japanese (Kabar, Mechanized, Type 94, Tanto options).
- The tile of the selected option must fit the Slot in shape and size.
- The stripes on each side must be the same colour as at least one of the stripes framing the Slot.
Figure: Rikugun Rifle Platoon B with a YES/NO chart showing which options can be placed in each of its slots according to these rules.
2 - Game Turn & Markers
Heroes of Normandie is played over a series of Game Turns. Each Game Turn is divided into three phases:
Editorial note: the printed text of this chapter names "Heroes of Normandie" rather than this game (the sister title carried over into the text); it is transcribed as printed.
- 2.1 - Order Phase: where you assign Order Tokens to your Units (see below).
- 2.2 - Activation Phase: where Units with Order Tokens move and attack (see p.09).
- 2.3 - Supply Phase: where the rest of your Units can move and you prepare for the next Game Turn (see p.15).
IMPORTANT: At the end of the Supply Phase, check to see if either side has won the scenario, or if you have reached the scenario's time limit. If not, start the next Game Turn.
Initiative
Each Game Turn, one player will have the Initiative for that turn. This is indicated by the Initiative Marker near the number of the current turn on the Turn Chart. The player with Initiative acts first during each Phase of the Game Turn. At the end of the Game Turn, the Initiative switches to the other side for the next Turn.
2.1 - Order Phase
Steps of the Order Phase
During the Order Phase, both players assign Order Tokens to their Units. Only Units that have Order Tokens will be able to move and attack during the Activation Phase (the others will have a chance to act during the Supply Phase, so don't worry).
The Order Phase is split into four steps:
Step 1 - Resolve all Start of Order Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
Step 2 - Count the number of Order Tokens you are entitled to:
Each Game Turn, you get a number of Numbered Order Tokens equal to the sum of all Order stars from any Officers, as well as Personal Orders, Order Options, or Recruitment Tile Special Abilities. Starting with Order #1, take the consecutive Numbered Order Tokens up to your maximum Order total.
Step 3 - Assign Order Tokens:
No more than a single Order Token per Unit! The player who has the Initiative places all his Order Tokens on any Units in his army, then his opponent does the same.
Step 4 - Resolve all End of Order Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
Order Pool and Tokens
- Saving Time: Players can place their Order Tokens simultaneously.
- TIP: Be careful about which number you assign to what Unit as their actions will be resolved in numerical order!
- WARNING: A Unit can never have more than one Order Token at a time!
- Action Cards might let you expand your Order pool.
- Sudden Death: If you don't have any Numbered or Special Order Tokens to assign to your Units at this point, you immediately lose the game!
IMPORTANT: Your Order pool is the sum of any valid Order Stars featured on your Recruitment Tiles. Add up the Stars basically provided by said tiles plus any unlocked by filling a Slot and/or those yielded by slotting an Order option.
1*: The Stars on the Officers' actual counters are repeated on the Recruitment Tile, and do not need to be counted twice.
Figure: In this example, the American player has 5 stars: 1 from G. Cates (Field Command) and 1 from his Planning Order Option, 1 from Platoon III (Officer), 1 star which is unlocked by filling the left slot with an option and 1 star directly from the Recruitment Tile. Take the Order Tokens numbered 1 to 5.
Losing Order Tokens
If you lose a Unit that has an Order Special Ability (star), you also lose their Order Token for the rest of the game, starting at the beginning of the next Order Phase (you do not lose them during an ongoing Turn).
Numbered Order Tokens
The Numbered Order Tokens allow you to activate your Units during the Activation Phase. They are numbered from 1 to 10 and their amount depends on the Recruitment Tiles and Special Abilities present in your army. Place these Numbered Order Tokens so only you can see the numbers. The tokens' reverse side, adorned with the symbol of your army, will thus be facing your opponent who will not know in which order your Units will act.
Bluff Order Tokens
When placing the set of Order Tokens to which you are entitled, you also place one Bluff Order Token. A Bluff Order Token has no number on its front side but looks identical to other Order Tokens from the back. While it does not activate a Unit, it can trick your opponent into believing you might.
Special Order Tokens
Special Order Tokens can be obtained with either the High Command Action Card, the Battle Plan Order Option, or a Special Ability. Special Order Tokens can be activated before or after any other Order Token, which means they can even take precedence over Order #1 and be played as Order #0. However, they cannot interrupt an ongoing activation.
If several players want to activate Special Order Tokens at the same time, the player who has the Initiative reveals and plays his Special Order first. His opponent plays his next.
For some specific rules, a Special Order Token is considered to have the same value as the last Numbered Order Token revealed.
ORDER TOKEN LIMIT: You can never have more than 10 Numbered Order Tokens, 2 Special Order Tokens, and 2 Bluff Order Tokens.
2.2 - Activation Phase
During the Activation Phase, the players take turns activating their Units and taking actions. Normally, only Units marked with a Numbered or Special Order Token can take actions during this phase, but some Action Cards and Special Abilities may allow a Unit to act out of turn.
- The player who has the Initiative plays first, starting the phase by revealing his Order Token 1. The Unit with that token may then take an action.
- When the Activated Unit's action is complete, the other player reveals his Order Token #1 and takes actions with that Unit. The players continue taking turns, revealing their next Numbered Order Token and taking actions, until all Units with Numbered or Special Order Tokens have been Activated. Leave the Order Tokens next to the Units they were on, so you can remember which Units were Activated in this phase (to tell them apart from those that may still act during the Supply Phase).
- If you had to discard an Order Token before it was resolved (because the Unit was Destroyed or it received an Activated Marker), you still have to reveal the token when that Unit's activation would have occurred. However, nothing happens and your opponent gets to activate his next Numbered Order Token.
- If you have no more Numbered or Special Order Tokens to reveal, your opponent continues to activate his Units (by Order sequence) if he has Order Tokens left...
Unit Actions
When Activated, a Unit can take one of the following actions:
- 2.A - Movement Actions (see below).
- 2.B - Firing Actions (see p.12).
- 2.C - Do Nothing. You may also have your Unit do nothing, but it won't be able to act during this Turn's Supply Phase.
2.A - Movement Actions
- When a Unit takes a Movement Action, it can move a number of squares up to its Movement Value.
- This Movement Action can be a 0 square move, which is called a 0 move.
- Units can move diagonally.
- Two Units cannot occupy the same square at the end of a Movement Action.
Terrain and Movement
Some Terrain Elements have an effect on movement. They are described in Chapter 5 - Battlefield, p.20.
PENALTIES RELATED TO SUPPRESSED MARKERS (see p.15): Each Suppressed Marker inflicts a -2 penalty to the Unit's Movement Value. If this value drops to zero or less, the Unit is Immobilized.
Moving Infantry Units
An Infantry Unit cannot move through enemy Infantry Units, or through friendly or enemy vehicles. Infantry Units may move through "allied" Infantry Units as long as they do not share the same square at the end of the Movement Action.
Figure: example of an Infantry Unit moving along a path of three squares (1, 2, 3).
X Movement Value: If a Unit has a Movement Value of X, it cannot move. It also cannot use any bonuses to Movement Actions. Even an Action Card cannot allow it to move. If it must make a Forced Move, it is Destroyed instead. A Unit with an X Movement Value may still change its orientation, but this is considered a Movement Action (called an "X move").
Figure: An Infantry Unit can freely swivel and change its orientation at any time during its Movement Action, even if the move is X or 0. It should always have its midpoint in the center of the square and can face in any direction, including a diagonal position. This last is important for Units with a Firing Arc (see p.13).
WARNING: At the start or the end of its Movement Action, an Infantry Unit can turn its counter over to change state, even if it has a 0 or X Movement (see Changes of State, p.24).
Offset Grid Squares
Only Infantry Units can enter Offset Grid Squares (B). These squares do not align with the General Grid of the Terrain Boards (A).
Of course passage must be free and unblocked to allow any Movement Action.
An Infantry Unit can move, even diagonally, from one Offset Grid square to any adjacent Offset Grid square (B). A direct movement between an Offset square and an adjacent one in the General Grid must traverse the sides of both squares and may not be traced through any corner. The necessary passage through an incomplete square is free (A).
Figure: Offset Grid squares: blue moves are allowed, red moves are prohibited.
2.A - Movement Actions (continued): Moving Vehicles
The way Heavy Vehicles and Light Vehicles move depends on the number of squares they occupy.
Moving 1-Square Vehicles
A Vehicle that occupies one square (such as a jeep) moves like an Infantry Unit (though Terrain Elements may have a different effect on Vehicles, see p.20). It may also change its orientation during its move, just like Infantry Units. A Vehicle that occupies a single square may end its Movement Action (including a 0 move) oriented diagonally, at a 45° angle, with the counter midpoint still on the center of the square. This is particularly useful for Units with a Limited Firing Arc (see p.13).
Moving 2-Square Vehicles
When moving a two-square Vehicle forward, count the number of squares moved from the front of the Unit counter. If you wish to move backwards, count the number of squares from the rear of the Vehicle. Both forward and backward movement can be combined in a single Movement Action. During its Movement Action, a Vehicle is allowed only one free pivot of 45° per square it enters.
Figure: If a Vehicle pivots in place, without moving forward or backward, whilst keeping its front or rear in the same square, then ALL 45° turns cost 1 point of movement.
Figure: A Vehicle may carry out or finish its Movement Action diagonally, even if the two squares on either side of it are Impassable (see p.18).
Figure: If a Vehicle ends its Movement Action in a diagonal position, it still only occupies two squares. In this case, Unit counters may overlap.
Forced Moves
Some situations or Action Cards can force a Unit to move. This is called a Forced Move. Unlike normal movement, Forced Moves do not trigger special actions that are related to movement, such as Opportunity Fire (see p.27). If a Unit with the Active Side up (see Changes of State, p.24) is forced to move, it is flipped to the Inactive Side first. If a Unit is forced to move off the board or into an Impassable Terrain Element (see p.20), the Unit is Destroyed.
If the Unit either has a Movement Value of 0 or X, is forced to move off the Terrain Boards, or is forced to move into an Impassable Terrain Element, it is Destroyed.
Infantry Units subject to a Forced Move are immediately Destroyed if they cannot relocate to an adjacent unoccupied square. The same applies if their Movement Value is 0 or X, or when forced to move within an enemy ZoC or into an Impassable square, or across the edge of the battlefield.
Running Over Infantry
When a Vehicle moves, it may pass through a square that contains an allied or enemy Infantry Unit. If the Vehicle ends its Movement Action in a square that is occupied by an Infantry Unit, the Infantry Unit must make a Forced Move into an adjacent unoccupied square of its owner's choice. It also gains a Suppressed Marker.
Special Movement Abilities
Some Special Abilities can modify a Movement Action, these two in particular:
- Assault (icon): allows you to move into a square occupied by an enemy Unit to initiate hand-to-hand combat (see Assault p.28).
- Fire on the Move (icon): lets you take a Firing Action at the beginning of, during, or at the end of your Movement Action (see Fire on the Move p.25).
Zone of Control
Every Unit exercises a Zone of Control (or "ZoC") over any adjacent squares, as long as the Unit has a Clear or Obscured Line of Sight (or "LoS") to those squares (see Line of Sight, p.13). If one of the squares is Impassable, even if the Unit has a LoS on it, it is not part of its ZoC.
Figure: In this example, the Unit exerts a Zone of Control on the 8 squares adjacent to it. Since none of the 8 adjacent squares is Impassable, its ZoC is not reduced.
An Infantry Unit cannot move directly between squares within an enemy ZoC. It may enter no further than one square into that ZoC. To exit, the Unit must move to an adjacent square outside the ZoC. This exit move may take the Unit into ANOTHER ZoC. The Unit may even re-enter an enemy ZoC it has just exited.
EXCEPTION: The only move that an Infantry Unit can make within one or more ZoCs can only be into a square occupied by an opposing Unit. In this case, it must win an Assault (see 6.3 - Assault, p.28).
Figure: The US Unit might directly Assault Japanese Unit A with a 2-square move. It may prefer a Movement Action no further than one square into the ZoC (1) to stop there, or exit the ZoC (2) straight away. It may then re-enter the ZoC with a basic move, or reach Japanese Unit A or B with an Assault move. WITHIN an enemy ZoC, 2-square moves can only be made by attackers who are Assaulting.
ZoC and Offset Grid Squares
Figure: The ZoC of a Unit present in a square of the General Grid extends to the surrounding boxes of this grid, whether complete (A) or incomplete (B). Blue moves are allowed, red moves are prohibited.
Figure: The ZoC of a Unit within a Terrain Element containing offset squares extends only to the adjacent Offset squares (A) and the incomplete General Grid squares overlapped by its position (B).
Figure: Legal moves in blue, prohibited moves in red. The diagonal moves out of the Offset Grid are prohibited.
ZoC and Vehicles
A Vehicle does not have a ZoC. However, some Vehicle Special Abilities use the term ZoC to limit their effect to adjacent squares. Vehicles are not affected by the ZoC of enemy Infantry Units.
PENALTIES RELATED TO SUPPRESSED MARKERS (see p.15): Enemy Infantry Units are not affected by a Suppressed Unit's Zone of Control.
2.B - Firing Actions
Instead of a Movement Action, a Unit can take a Firing Action. In order to attack, the Unit must meet four conditions:
- Attack Type
- Line of Sight
- Range
- Firing Arc
Attack Type
Every Unit has one or more Combat Values. A Unit can only attack if it has a numeric Combat Value with the same background colour as the target's Defense Value, even if the value is 0. An "X" value, however, indicates that the Unit cannot fire at a Unit with a Defense Value of that colour. For example, Heavy Vehicle Units have a Grey Defense Value, so Units must use a Grey Combat Value to attack them. If a Unit's Grey Combat Value is marked with an "X", that Unit basically cannot attack Heavy Vehicles.
ATTENTION: Units can of course attack Heavy Vehicles if they obtain weapons or gear with a valid Grey Combat Value.
ATTENTION: Firing during a Movement Action requires the Unit, or its weapon, to have the Fire on the Move Special Ability (see p.22). Vehicles' secondary weapons often meet these requirements whilst their primary weapons don't.
Line of Sight
A Unit needs a Clear (green) or Obscured (red) Line of Sight (or "LoS") in order to attack a target. To check whether the shot is possible, trace an imaginary straight line from the center of the attacking Unit's square to the center of the target's square:
- Clear LoS (green triangle): one that does not cross any Obstacles (see p.21).
- Obscured LoS (red triangle): one that passes through one or more Obstacles that do not block LoS but which do provide concealment (see p.21).
- Blocked LoS (black triangle): one that passes through an Obstacle that does block LoS.
In addition to Firing Actions, LoS is used for other situations, such as some Special Abilities, which are explained later in these rules.
Obstacles
An Obstacle is anything that can block or obscure LoS. Infantry Units block LoS if the firing Unit and the target are both Infantry Units. All Vehicles always block LoS.
Figure: Effect of different Unit types on LoS. Units connected by red arrows cannot shoot at each other.
- A Terrain Element marked with this symbol (red cross) completely blocks LoS. You cannot shoot at an enemy Unit if there are any Terrain Elements of this type between the two Units.
- Every square marked with this symbol (red triangle with -1, -2 or -3) obscures LoS that passes through it (even partially). For every square that obscures LoS, subtract the value printed in the symbol from the attacker's final dice roll result (instead of directly from the Unit's Combat Value). These penalties are cumulative.
WARNING: Do not count the square that the firing Unit is in or the square occupied by the target when checking for LoS and obscuring terrain! In all cases, if a Unit is in another Unit's LoS, both Units can see each other.
Line of Sight and Vehicles
When a Vehicle occupies two or more squares, you can trace LoS from the center of any square occupied by the Vehicle or any point between them. Similarly, when a Vehicle is the target, the attacker can aim at the center of any square occupied by the Vehicle, or at any point between them.
Range
Most weapons have no range limit (see Limited Range, p.25). But any shot over 7 squares is considered to be at Long Range and suffers a -2 penalty to the final result of the dice roll. When counting the number of squares to the target, count the squares on the general grid. You can use diagonals and you must always take the shortest path. Do not count the square of the firing Unit.
WARNING: If the LoS drawn to the center of a Vehicle that occupies more than one square is in doubt, the disagreement is settled by tracing the shortest LoS possible.
Figure: Range examples on the general grid.
Firing Arc
A Unit can only fire at a target that is within the Unit's Firing Arc. Unless otherwise noted (by a Special Ability), all Units have a 360° Firing Arc.
Some weapons have a Limited Firing Arc. Their firing arc is represented by a graphic on the weapon. To determine if a Unit is in a firing arc, the line from the attacker to the target must remain between the two marks at each end of the firing arc.
Figure: Firing arc examples.
WARNING: Firing Arc and LoS are two different things. Firing Arcs only apply to Firing Actions. A Unit can see in all directions, but can only fire where the weapons are pointed!
Alternate Firing Action
Some Special Abilities, Recruitment Options and Action Cards can modify a Firing Action, or can be used instead of a Firing Action. This is called "taking an Alternate Firing Action." Unless otherwise indicated, an Alternate Firing Action does not use the Special Abilities or Combat Value printed on the Unit counter. Instead, it only uses the values from the ability, card or option that granted the Alternate Firing Action. Special Abilities that trigger a Firing Action can also be used to trigger an Alternate Firing Action (for example: Opportunity Fire).
Resolving a Firing Action
To resolve the Firing Action, roll 1 die and add the number rolled to the attacking Unit's Combat Value (with the same colour as the target's Defense Value). Then add any other bonuses (Special Abilities, Action Cards, Recruitment Options, etc.) that apply before subtracting any penalties.
If the final result is equal to or higher than the target's Defense Value, the target takes a Hit.
Figure: The US Unit performs a Firing Action and rolls a "3" on the die. It adds its yellow Combat Value (+2), and a bonus of +1 from the Ammo token it's using, for a total of 6.
Figure: The Japanese Unit has a Defense Value of 4 and it is located in a Terrain Element that gives a Defensive Bonus of +1, for a total of 5. Since the US total is higher [sic: printed as "higher to"] than the Japanese's defense, the attack hits!
PENALTIES RELATED TO SUPPRESSED MARKERS: Each Suppressed Marker inflicts a -2 penalty on MOST of the Unit's die rolls (see p.15).
The Effect of a Hit
- If a target with this symbol (Hit skull) is Hit, that Unit is Destroyed and removed from the game.
- If a target with this symbol (flip-over skull) is Hit, that Unit counter is flipped over:
- If the target is an Infantry Unit, it is not Destroyed.
- If the target is a Light Vehicle, it is Destroyed. The Vehicle counter is flipped over and becomes a Wreck Terrain Element.
Destroyed Units
When an Infantry Unit is Destroyed, it is removed from the game board. Place the Destroyed Unit under the matching Recruitment Tile.
When a Vehicle (Light or Heavy) is Destroyed, it is not removed from the board (except if it has no Wrecked Side). Instead, the counter is flipped over and it becomes a Wreck. A Wreck counts as a Terrain Element (see p.22). A Wreck can be removed from the battlefield if enough Destruction Points are inflicted upon it (see p.25).
Double Hits
If the result of any Firing Action (including any bonuses) is equal to or higher than twice the target's Defense Value (including any bonuses), the target is immediately Destroyed.
Figure: Double Hits example: 1 Hit, and Double Hits (2 Hits), which Destroy the target.
Breaking Point
When a Unit is Destroyed, it may Break the combat group that it is part of. If the total number of Unit counters shown on the Recruitment Tile that have been Destroyed is equal to or higher than the Breaking Point on that tile, the combat group is broken. Flip the Recruitment Tile over to the broken side (see Breaking Point in the Scenarios Booklet, p.17).
2.3 - Supply Phase
During this phase, Units that did not act via an Order Token and did not receive an Activated Marker may take a Movement Action. Some Special Abilities or other effects may even allow them to take other actions. When this Phase is concluded, players get ready for the next turn.
ATTENTION: The absolute rule here is that neither Firing Actions nor any Assaults may happen during this phase! The Supply Phase only allows Units that do not have an Order Token or Activated Marker to take one Movement Action.
Steps of the Supply Phase
Step 1 - Resolve all Start of Supply Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
Step 2 - Each player retrieves all Bluff Order Tokens from their Units.
Step 3 - The player who has the Initiative plays first and must take the following actions in the following order:
- Take a Movement Action with any or all of his Units that do not have an Order Token or an Activated Marker.
- Discard one (and only one) Suppressed Marker from each of his Units.
Step 4 - Once the player with the Initiative is done, the opposing player completes Step 3.
Step 5 - Resolve all End of Supply Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
Step 6 - Retrieve all Special and Numbered Order Tokens.
Step 7 - Discard as many Action Cards as you wish, then draw until you reach your maximum hand size as indicated by the scenario.
Step 8 - Turn over any Doctrine Cards that were used this turn.
Step 9 - Move the Initiative marker one notch down the Turn Chart, and turn it over to determine the new Initiative. The other player will have Initiative for the next Game Turn.
2.4 - Markers
Suppressed Markers
When a Unit suffers from a temporary physical or psychological condition that limits their ability to fight, it is marked with a Suppressed Marker. The Unit may have been caught by Suppressive Fire, have lost morale, been pushed to the limit, or simply be in dire straits.
- Dice roll -2: Each Suppressed Marker inflicts a -2 penalty on all the Unit's dice rolls EXCEPT for Destruction (p.24) and Scattering (p.27).
- Movement -2: Each Suppressed Marker inflicts a -2 penalty to the Unit's Movement Value. If a Unit's Movement Value drops to 0 or less, the Unit is Immobilized.
IMPORTANT:
- Enemy Units ignore the Zone of Control of any Unit with a Suppressed Marker.
- A Unit that receives a Suppressed Marker during its Movement Action completes the Movement Action without suffering the Suppressed penalty.
Activated Markers
Some Action Cards or Special Abilities, such as Opportunity Fire, can activate Units that don't have an Order Token/Activated Marker or that have an Order Token but haven't been Activated yet. If this happens, you must place an Activated Marker on the Unit.
WARNING: A Unit that receives an Activated Marker loses any Order Token it may have (without revealing it), and the Unit can no longer be Activated or take any action for the rest of the turn (except to defend itself during an Assault). In addition, the Unit cannot take a Movement Action during the Supply Phase.
Markers & Templates
You will find detailed descriptions in later pages.
Figure: Markers and templates.
4 - Action & Doctrine Cards
Editorial note: the chapter heading is printed as "4" on the rules page, while the Summary page lists this chapter as "3". The heading is transcribed as printed.
4.1 - Action Cards
Action Cards spice up the game and make your battles more heroic. Each player has their own deck of Action Cards related to the faction they are leading into battle, representing unique tactics and factional advantages.
Figure: Front of an Action Card: Army Symbol and Card Title; Alternate Bonus; Battle Event; Effect of the Card; Number of copies and reference of the card. (Example card: Rushido, "Play when one of your Infantry Units is Destroyed. That Unit may take a Firing Action before it is Destroyed.")
Figure: Back of an Action Card: Faction Flag.
At the beginning of the game, you will draw a number of Action Cards. At the end of each Supply Phase, you will draw as many cards as you need to complete your hand, so there is no reason to save them! Use as many as you can each turn.
WARNING: If two players want to play an Action Card at the same time, the player who has the Initiative resolves his card first.
Action Card Effects
Each Action Card can be used for one of two purposes: either to trigger a Battle Event or to gain an Alternate Bonus. You cannot use both effects when you play it.
Battle Events: Every Action Card describes a special action or event that you can use when you play the card. You can only play a Battle Event during the phases indicated in the description, but you may play as many cards as you want in a turn, even more than one for a single action. When you play a Battle Event, follow the instructions printed on the card, then discard the card. If the Action Card goes against a game rule, the text of the card always applies, except for the Absolute Rule of the Supply Phase.
Alternate Bonus: Some Action Cards show an Alternate Bonus. This is a modifier that you can apply to an action. Simply play the card and apply the bonus shown, then discard the card.
WARNING: You cannot combine different types of Alternate Bonuses during the same Activation, but you can play several of the same type.
TIP: If you choose to use an Alternate Bonus, you must play the Action Card(s) and declare it before rolling any dice or beginning a Movement Action.
Action Card bonus icons:
- Assault (+X): Grants a +X bonus during an Assault, whether attacking or defending.
- Firing (+X): Grants a +X bonus to one Firing Action or to the use of one Recruitment Option or Action Card that allows an Alternate Firing Action.
- Movement (+X): Grants a +X square bonus to a Unit's Movement Value during a Movement Action.
- Dice (+X): Grants a +X bonus to any dice roll.
4.2 - Doctrine Cards
Doctrine Cards represent the specificities of each regiment.
Figure: Front of a Doctrine Card: Patch of the Doctrine Regiment; Title of the Doctrine Card; Effects related to Doctrine Card Activation; Trigger of the Card; Effect of the Card; Reference of the Doctrine Card; Name and total number of cards within this Doctrine. (Example card: Relentless. Play at the beginning of the Order Phase. For this turn, all your Infantry Units have a +1 to their Assault result when Attacking.)
Figure: Back of a Doctrine Card: Faction Symbol; Identification code for this deck of Doctrine Cards; Coloured Stripes corresponding to the Regiment of the Doctrine Card; Patch of the Doctrine Regiment; Name of the Doctrine.
When setting up the scenario, take the deck of Doctrine Cards corresponding to each Tactical Command Tile in your Army Composition. The Doctrine Cards must have the same Identification Code as the Tactical Command Tile (A1, G1, etc.), see example below.
Shuffle each deck separately and draw a card to place below the Tactical Command Tile.
Figure: Identification code for the deck of Doctrine Cards (G1) to be used with this Tactical Command Tile.
Effects of the Doctrine Cards
- Discard: This Doctrine Card can only be used once per game. Discard it once its effect has been applied.
- Return: This Doctrine Card can be used once per turn. Turn it over after its effect has been applied. It will be flipped over again at the end of the Supply Phase.
- Permanent: The effect of this Doctrine Card is Permanent even if a Tactical Command Tile reaches its Breaking Point. It does not need to be activated for its effect to be applied.
If a Tactical Command Tile reaches its Breaking Point, its Doctrine Card with the Discard and Return effects are no longer available.
5 - Aviation Rules
Figure: Aircraft in aerial combat.
Aerial duels have always been part of the collective imagination linked to the Pacific, and the series Black Sheep Squadron is largely responsible for this. Zeros versus Corsairs, swirling over the clear, warm waters of this part of the world, are images that have long been with us.
These rules will allow you to simulate the major role that aviation could play in the land (but also naval) battles of the Pacific War.
Aircraft Units
- Units with this Special Ability (aircraft icon) are not present on the battlefield: they fly over it.
- Aircraft Units are recruited with Order Options. The cost of these Recruitment Options is defined by the Aircraft you choose, as shown on the Aircraft's Recruitment Tile.
- When recruiting an Aircraft, place its Recruitment Tile next to the Command Tile containing the Order Option.
Figure: The Japanese player decides to recruit an AGM "Zero". The Order Option is slotted into the Field Command's Command Tile and the aircraft's Recruitment Tile is placed next to it. The cost of this Order Option is 30 points.
- In order to Activate an Aircraft Unit you must have a Unit with the Radio Special Ability still in play. Otherwise you can only assign a Bluff Order Token to it.
WARNING: Action Cards that allow moving or changing Order Tokens cannot be played for Aircraft Units.
Planespotting
At the end of the Order Phase, the visibility status of Aircraft Units is either In the Clouds or In Plain Sight for the rest of the Turn.
- In the Clouds: the Aircraft Unit has a Bluff Order Token. It is too far away to Attack or be targeted, even by an Anti-Aircraft Unit. Reveal the Bluff Order Token at the beginning of the Activation Phase.
- In Plain Sight: the Aircraft Unit did not get a Bluff Order Token. It flies over the battlefield and can be targeted but may only take a Firing Action if it got a Numbered or Special Order Token.
Figure: The Japanese player placed a Numbered Order Token on the Aircraft Unit's Recruitment Tile, which can not only Activate this Turn, but may also be targeted by non-AA Units.
Long Range Penalty
IMPORTANT: NEVER apply the Long Range Penalty whenever an Aircraft Unit is involved in a Firing Action, whether as attacker or target.
Editorial note: the printed heading reads "Longe Range Penalty"; the apparent misspelling is corrected to "Long Range Penalty" here.
Aircraft Taking a Firing Action
- Aircraft Units can only take a Firing Action when a Numbered or Special Order Token is placed on their Recruitment Tile.
- Aircraft Units can target ground Units or other Aircraft Units.
- Aircraft Units use the side Defense Value when targeting a Heavy Vehicle.
- Aircraft Units always have a Clear Line of Sight to every Unit, except those inside Buildings, even partially destroyed.
- Units using cover of any non-Building terrain (Jungle, Palm Trees, Rocks, etc.) get the benefit from that Terrain's Defensive Bonus.
- Aircraft Units cannot spot concealed Units.
Other Units Taking a Firing Action
- Units without Anti-Aircraft Special Abilities can only target Aircraft Units with a Numbered or Special Order Token placed on their Recruitment Tile.
- Only Units with the Machine Gunner and/or Anti-Aircraft Special Abilities can take a Firing Action against Aircraft Units.
- A Heavy Vehicle cannot use its Primary Weapon (red outline) for a Firing Action against Aircraft Units, unless that Primary Weapon has the Anti-Aircraft Special Ability. Only if the vehicle has a Secondary Weapon (yellow outline) with the Machine Gunner Special Ability can the vehicle shoot at Aircraft Units.
- Units with the Limited Range Special Ability, as well as Units with a Special Ability that makes use of any Template (icons), cannot fire at Aircraft Units.
- Units with a Limited Firing Arc cannot fire at Aircraft Units, unless these Units have the Anti-Aircraft Special Ability. In this case, the Limited Firing Arc is ignored.
- All Units, not in Buildings, have Clear Line of Sight to any Aircraft Units except those "In the Clouds".
Anti-Aircraft
Units with the Anti-Aircraft Special Ability can take a Firing Action against an Aircraft Unit, even if that Aircraft Unit does not have a Numbered or Special Order Token placed on its Recruitment Tile. In this case apply a standard -2 Speed Penalty (see Speed Penalty). If the targeted Aircraft Unit has an Order Token placed on its Recruitment Tile, calculate the Speed Penalty normally. However, a Unit with this Special Ability cannot fire at any Aircraft Unit that is In the Clouds.
Always add any bonus (+1, +2, ...) shown next to the AA Special Ability to the dice roll.
Speed Penalty
IMPORTANT: Any Unit (land and air) that takes a Firing Action against an Aircraft Unit must always apply the Speed Penalty.
The Speed Penalty is determined by the numerical difference between the Order Token of the firing Unit and that of the Aircraft Unit. Always subtract the lowest value from the highest.
The player whose Aircraft Unit was targeted must reveal the Order Token if its value had not been disclosed yet. Replace that Token face down again on the Aviation Recruitment Tile until the Aircraft Unit is Activated.
Opportunity Fire
A Unit using Opportunity Fire, in response to an Aircraft that has fired, must use the value of the last revealed Numbered Order Token to resolve the Speed Penalty. Since this is the targeted Aircraft's own Order Token, the Speed Penalty for Opportunity Fire is always 0.
Special Order
If any Unit with a Special Order Token targets an Aircraft Unit with a Numbered Order Token, then the Speed Penalty is the difference between the value of the Aircraft Unit's Order Token and that of the last revealed Numbered Order Token (of either player) before this Firing Action.
If an Aircraft is Activated with a Special Order before it has been targeted, its Speed Penalty value also is that of the last revealed Numbered Order Token (of either player).
This value can be 0 if the plane is Activated before Order Number 1.
If the target is an Aircraft with an unrevealed Special Order Token, apply a standard -2 Speed Penalty.
Examples: An Aircraft Unit with Order Token #3 is targeted by a Unit:
- with Order Token #2, the Speed Penalty (3-2) is 1.
- with Order Token #5, the Speed Penalty (5-3) is 2.
- with Order Token #3, the Speed Penalty (3-3) is 0.
- with Opportunity Fire, the Speed Penalty is 0.
Bombs & Rockets
Bomb or Rocket markers shown on an Aircraft Unit's Recruitment Tile are used for Alternate Firing Actions.
Figure: The Japanese AICHI D3A Dive Bomber has one 550-LB bomb and two 130-LB bombs. It can use them as an Alternate Firing Action, with the Howitzer Special Ability, using the Combat Values on the Template.
5 - Battlefield
Editorial note: the printed rules page for this chapter is headed "5 - BATTLEFIELD", the same number as the Aviation chapter above (the Summary page numbers Aviation as 4 and Battlefield as 5). Both headings are transcribed as printed.
The battlefield is a key element in your strategy, affecting movement as well as combat. It is created using a combination of Terrain Boards and Terrain Tiles, as shown in the scenario you are playing. Anything in the battlefield that has an impact on the fighting, such as Palm Trees or Rocks, is called a Terrain Element.
Figure: The larger Terrain Boards show large sections of the battlefield.
Figure: Inter-Tiles and Terrain Tiles are used to modify Terrain Boards to increase the battlefield variety. (Most of the Terrain Tiles shown are included in the Battle Pack #1.)
5.1 - Terrain Effects
Here, each symbol's rules and effects will be explained, as well as how they define the various Terrain Elements.
- Canopy (marked as new or modified for the Pacific war): This Terrain Effect increases the associated Defensive Bonus if the Firing Action is performed by an Aircraft Unit. This effect does not apply to Alternate Firing Actions.
- Defensive Bonuses (+1, +2, +3): Any Unit in this Terrain Element receives the bonus if the colour of the Unit's Defense Value type is the same as the colour of the Terrain Element's symbol. Add the bonus printed in the symbol to the Unit's Defense Value.
- Difficult Passage: When a Unit moves into this Terrain Element, it must immediately stop moving. A Unit working its way through a Difficult Passage area can only advance 1 square before ending its Movement Action.
- Holes: Infantry Units inside a Terrain Element with this effect do not block the Line of Sight of Units outside the Terrain Element; however, they do block LoS for other Infantry Units in the same element.
WARNING: This effect always applies even if a Unit is adjacent to a Line linked to the Hole.
- Lines: A Line is a specific (linear) type of Terrain Effect.
- A Line extends between two Interspace anchors, spaced 1 or more squares apart (here a Line, 3 squares long).
- Even though they are "connected", a Firing Action that crosses multiple segments still adds the Terrain Effects of each segment as if they were individual Lines.
- A Firing Action that crosses multiple discrete Lines adds the Terrain Effects of each Line (in this case, the shot gets a total of -2 and the defender gets +1).
A Unit that occupies more than one square is no longer affected by a Terrain Element as soon as the front (or the rear, if it is moving backwards) of the counter is no longer in that Terrain Element.
Figure: Terrain Element example with STOP markers on a path of squares.
- Lines and adjacency: Units adjacent to a Line that Obscures LoS can ignore that modifier when taking Firing Actions; all others cannot. (In the printed example, A is adjacent to the Line during its Firing Action, so it has no penalty. B is not adjacent to the Line during its Firing Action, so it applies the penalty. C: both Units are not adjacent to the Line during the Firing Action, so the penalty applies to both Units.)
- If the Line is linked to a Defensive Bonus and completely surrounds a linear set of squares, then this set is considered a Terrain Element (Trench, for example). The Defensive Bonus applies only to Units present in the Terrain Element. In the printed example, A takes a Firing Action against B; B does not benefit from the Defensive Bonus linked to the Line because it is outside the Terrain Element. If B takes a Firing Action against A, it would ignore the Terrain Effects associated with the Line because it is adjacent to it. A gets the Defensive Bonus when targeted by C.
- Any Line with Difficult Passage affects Movement Actions that cross it.
Figure: Line with Difficult Passage, showing a path of squares 1, 2 and then STOP.
Contour Lines
A Contour Line is one that separates two areas of different elevation. Firing Actions that cross a Contour Line have their range limited to one square beyond the Line (A), unless the shooter or the target is adjacent to the Contour Line (B, C, D and E). In the case of B, the Firing Action is possible in both directions because the target is also adjacent to the Contour Line. Terrain Effects are applied as normal: an Obstacle (-1) for C and an Obstacle (red cross) for D. Infantry Units block LoS if both the firer and the target are Infantry Units (E).
Impassable
No Unit may enter this Terrain Element. Any Unit that somehow finds itself partially or fully entering such a square is automatically Destroyed. If the Unit is a Vehicle, put its Wreck as close as possible to the Impassable Terrain Element without being in it.
Impassable to Some Unit
Figure: Example: impassable to Infantry Units, to Light Vehicles and to Heavy Vehicles.
These Terrain Elements prevent certain Units from entering. The type of Unit is identified by the colour of the shield or shields that accompany the Impassable symbol. Any restricted Unit that somehow finds itself partially or fully entering an Impassable square is automatically Destroyed. If the Unit is a Vehicle, put its Wreck as close as possible to the Impassable Terrain Element without being in it.
Obstacles
This Terrain Element completely blocks LoS.
Every square marked with this symbol (-1, -2 or -3) obscures LoS that passes through it (even partially). For every square that obscures LoS, subtract the value printed in the symbol from the attacker's final dice roll result (instead of directly from the Unit's Combat Value). These penalties are cumulative. Do not take these symbols into account for the squares occupied by the firing Unit or the target.
If the symbol is in a Yellow triangle, the penalty is applied only if the target is an Infantry Unit.
Structures
Some Terrain Elements, such as Buildings or Wrecked Vehicles, are called Structures.
Unlike other Terrain Elements, Structures can be Destroyed. In order to destroy them, you need to deal as many Destruction Points as are printed on the symbol (see 6.2 - Destruction, p.25). Once this number has been reached, turn the Terrain Element over to its rubble side or, if it is a Wreck, remove it from the game.
Water
Units that do not have the Amphibious Special Ability may not enter a Water element. Units with this Special Ability may move in water normally, while all others are automatically Destroyed (and removed from the game) if they somehow find themselves partially or fully entering a Water square.
5.2 - Terrain Elements
Each Terrain Element includes one or more squares surrounded by a coloured border, and may also be identified by a set of symbols that summarize its effects. The effects of a Terrain Element apply to all of the squares or Interspaces (the intersection of four squares) that make up that Terrain Element. In order to receive any bonuses from a Terrain Element, a Unit must be completely inside.
Difficult Terrain
Difficult Passage; Impassable to Vehicles. These are mud pools or soggy areas. They spread along the rivers of Guadalcanal and form charming leech pools.
Jungle
Defensive Bonus (Infantry); Impassable to Vehicles; Obstacle. It's hot, humid, and full of bugs. It's a perfect environment to get dysentery. It's pretty cool!
Palm Trees
Obstacle. You'd rather attach a hammock to their trunks and sip a cocktail instead of cowering behind them to save your life.
River / Low Water
Difficult Passage; Water; Impassable to Vehicles. In times of peace, we fish and swim there. But in times of war, we wade in with fear in our stomachs...
Rocks
Defensive Bonus (Inf.); Difficult Passage; Obstacle; Impassable to Vehicles. Rock piles are great for hiding and putting an obstacle between you and someone trying to shoot you.
Tall Grass
Obstacle (Infantry). They're grass, they're tall, they're Tall Grass. If velociraptors are around, stay out!
5.3 - Defensive Elements
A Unit in a Defensive Element benefits from the Defensive Bonus, unless the Firing unit is also inside. The same applies to an Assault.
Foxholes
Defensive Bonus (Infantry); Hole. When you need to hold a position but don't have time to dig trenches or build bunkers, burying yourself is the best solution...
5.4 - Buildings
Defensive Bonus; Impassable to Light and/or Heavy Vehicles; Obstacle; Structure. Buildings provide excellent protection and can be scenario objectives. They come in many sizes and types, but share common base rules.
Buildings & Line of Sight
Most Buildings block LoS completely. When this is the case, the illustration is taken into account instead of the whole tile (A). The red outline also blocks LoS for and to any Unit inside (B) (see next page).
A Unit inside a Building receives a bonus to its Defense Value against Firing Actions and Assaults, unless the Firing or Assaulting Unit is also inside.
Openings
An Opening is a part of an outside wall that has no red outline and is framed by Blue or White Arrows. You can only enter a Building through the spaces marked with a Blue Arrow (Doors). The move through the half-square does not count as a square of movement.
Doors
Doors (Blue Arrow) do not interfere with Movement Actions and allow Firing Actions.
Windows
Windows (Grey Arrow) also allow Firing Actions, but have the Difficult Passage Terrain Effect which hinders Movement Actions. They limit Zone of Control.
Buildings & Firing Actions
In order to fire from a Building, a Unit needs to be in the square adjacent to the Opening it will fire through. Its LoS is restricted by the red outline of the walls. In order to fire on a Unit that is inside a Building, the target needs to be in a square immediately adjacent to an Opening.
Figure: A Unit outside a Building and adjacent to an Opening can fire on Units inside the Building provided neither red outline nor interior walls block LoS (A). A Unit outside a Building and adjacent to an Opening can also be targeted by a Unit inside a Building on which it has an LoS (A).
In both cases, the target inside the Building benefits from the Building's Defensive Bonus.
Buildings & Movement Actions
- To enter a Building, the half-square of the General Grid is not taken into account.
- The ZoC of a Unit is limited by the Walls and Windows of the Buildings.
Figure: The Zone of Control of a Unit adjacent to a Blue Arrow pointing into or out of a Building (Units A and B) extends to the squares pointed to by the arrow and can therefore prevent exit (A) and entry (B) to the Building.
Figure: Only Infantry Units no larger than one square may pass or stop between adjacent Buildings.
Figure: When two Buildings are adjacent diagonally, Vehicles may move or stop in between.
6 - Special Abilities
Special abilities are elements that differentiate your Units. They fall into different categories:
- 6.1 - Changes of State (p.24)
- 6.2 - Firing (p.24-27)
- 6.3 - Assault (p.28-30)
- 6.4 - Defense (p.30)
- 6.5 - Command (p.30)
- 6.6 - Movement (p.31)
- 6.7 - Other (p.31)
6.1 - Changes of State
In order to "activate" or "deactivate" these Special Abilities, you need to turn the Unit over at the beginning or the end of a Movement Action.
Active Side / Inactive Side
You can do this during a zero move even if the Unit has a Movement Value of 0 or X.
- A Unit may voluntarily change state only once, at the start or at the end of its Movement Action.
- A Unit that has one of these Special Abilities may deploy with either side up.
- A Unit can only use the Special Abilities on its currently visible side. Any other abilities on its reverse side can't be used at all.
- Some Units may not have the ability on both sides, in which case the change can only be done once (for example: the Pillbox).
Overwatch
Once active, your Unit benefits from the Opportunity Fire Special Ability.
Ambush
When concealed (Active Side up), the Unit follows these rules:
- A concealed Unit may not be the target of a Firing Action.
- A concealed Unit ignores Explosion or Flamethrower Templates.
- A concealed Unit does not block Line of Sight.
- A concealed Unit that is involved in an Assault is flipped onto its Inactive Side just before the Assault begins.
- A Concealed Unit may use the Combat Values (to take a Firing Action) or any Special Ability printed on its Active Side without being flipped over. Taking any other Firing Action or using any Special Ability printed on its Inactive Side requires the Unit to flip to that side as a Forced Move. (Marked as new or modified for the Pacific war.)
- If a Unit is Concealed, none but its owner may look at its hidden face.
- A Concealed Unit that has a Limited Firing Arc (see Limited Firing Arc, p.13) may choose its facing when revealed, regardless of the facing the counter had on its concealed side.
In order to spot a Concealed Unit, you need a clear LoS. If the Unit is in a Terrain Element, you need a clear LoS and be within 2 squares of it. When you spot a Unit, turn it over onto its Inactive Side. This is a Forced Move.
WARNING: Conditions for turning a concealed Unit over are checked for each square the concealed Unit moves into or at the end of any enemy Unit's Movement Action.
- A concealed Unit can only be spotted or flipped over once per Movement Action.
- A concealed Unit that was spotted during its Movement Action keeps using the Movement Value of its Active Side until the end of its activation.
- Two concealed Units can spot each other.
Tripod
When activated, your Unit's properties change. For example, setting up a machine gun or a mortar.
6.2 - Firing Special Abilities
Ammo Boy
This Unit gives a +1 bonus to all Firing Actions of friendly Infantry Units in its ZoC. This bonus does not apply to Alternate Firing Actions. The Unit does not get its own bonus.
Anti-Aircraft
This ability is detailed on p.19.
Artillery Spotter
If you have at least one Artillery Spotter with a clear LoS to the Interspace targeted by an Indirect Fire Template, reduce the scattering distance by 1 Interspace.
Destruction
Units that have this Special Ability can destroy Structures. If a Structure, or a Unit inside a Structure, is targeted by gear or a Unit with this Special Ability during a Firing Action, the Structure may suffer Destruction Points. If the Firing Action is directed against a Unit and not specifically the building, first resolve the attack against the Unit, then determine whether the building receives any Destruction Points (here 3). Roll as many dice as indicated on the symbol.
Each dice result of 4 or higher allows you to:
- place a new destruction marker on its 1-point side on the Structure,
- or turn an already placed 1-point marker to its 2-points side instead.
If the total Destruction Points on the markers reach the value of the Structure (here 3), the Structure is Destroyed. If the Structure is a Vehicle Wreck, remove it; otherwise turn the Terrain Element over.
When a building is Destroyed, turn it over onto its rubble side. Every Infantry Unit inside receives 1 Suppressed Marker. First, the player with the Initiative redeploys all of his Units in the rubble. Once the first player is done, the opposing player does the same. Every Vehicle on the Structure is Destroyed and its Wreck-side is placed on top of the rubble.
Dual Weapon
During a Firing Action, roll two dice and keep the best result.
Fire on the Move
The Unit may take a Firing Action during its Movement Action. Fire on the Move is resolved before leaving, or after entering a square. The penalty indicated on the symbol is subtracted from the Unit's Combat Value (and not from the final result of the roll).
Flamethrower
Alternate Firing Action. This Unit has a flamethrower which uses a special Template. When using the Flamethrower, the Unit has the Fire on the Move (-1) Special Ability and uses the Combat Values on the Template.
When using the flamethrower, put the smallest end of the Template at the center of the counter's square, or on the red dot present on the firing Unit's counter, and orient it in whatever direction you choose, taking into account any limited firing arcs.
Any other Unit that is even partially covered by the Template is affected by the flames.
The Template is affected by Obstacles. It is also blocked as soon as it goes through the center of a square occupied by a Vehicle.
Figure: A flamethrower Template firing across the battlefield.
All Units, even Vehicles, receive a Suppressed Marker, then resolve the attack against any covered target individually.
WARNING: An Infantry Unit with the Flamethrower ability is removed from the game if it loses an Assault, but is turned over if Destroyed by a Firing Action.
Flamethrowers & Defensive Elements
If the firing Unit is on a square adjacent to a Defensive Element, or inside one, it may use its Flamethrower Special Ability to specifically target the Units inside this Defensive Element.
Units under the Template do not benefit from the Defensive Bonus provided by the Defensive Element. The Template is contained within the Defensive Element and does not affect the squares outside it.
Flamethrowers & Buildings
In order to fire into a one-room building, the flamethrower Unit needs to be in one of the squares adjacent to an Opening or in the Building itself. All the Units inside the building are Hit by the flames and do not benefit from the Defensive Bonus provided by the building.
Flamethrowers & Lines
The Flamethrower Template is affected by Terrain Effects related to a Line if the Flamethrower Unit is not adjacent to it. For example, a Template that crosses a Contour Line only affects the Units immediately behind it.
Frightening Shot
If your Firing Action has failed (no Hit, no Suppressed Marker, no Damage Marker), you may put a Suppressed Marker on your target.
WARNING: This Special Ability may not be used along with the Machine Gunner Special Ability.
Howitzer
Alternate Firing Action. When using this Special Ability, you must target an Interspace. There is neither range limit nor associated penalty. You need to have a clear LoS or obscured LoS to the target Interspace.
Take the Explosion Template and put it on the Interspace. Use the Combat Values corresponding to the Letter of the Special Ability icon. A Question Mark means that you must use the Combat Values on a marker (see Grenades p.33) or Action Card and not on the Explosion Template.
- You may not place a Template inside a building.
- A: Units and Structures under the Template, even partially, are affected.
- B: Penalties from Obstacles (-1, -2) obscuring the LoS to the target Interspace are taken into account, except those on a yellow shield.
- Units inside a building are not affected by explosion Templates outside the building.
- C: Concealed Units ignore explosion Templates.
Figure: Explosion Template on an Interspace, with a clear LoS to the target.
Figure: Explosion Template with obscured LoS (-1 penalty) and Units marked A, B and C.
IMPORTANT: Resolve each attack individually, using the Combat Values that match the attacker's Howitzer icon.
- On 1 to 4 (new or modified for the Pacific war): the shot scatters in the direction of the number indicated on the scattering Template to a distance equal to the number printed in the symbol. The Scatter Distance is reduced by one Interspace if the Unit taking the Firing Action has clear LoS to the targeted Interspace.
- On 5 or 6: the shot lands on the target Interspace.
Figure: Suppressed Markers do not affect scattering rolls.
When resolving attacks, do not take into account penalties due to Obstacles (-1, -2).
You may not use the Indirect Fire Special Ability from inside a building.
IMPORTANT: Resolve each attack individually, using the Combat Values that match the attacker's Howitzer icon.
Indirect Fire
Alternate Firing Action. This Special Ability works like Howitzer (above) if you have a clear LoS to the target Interspace. If you have obscured (-1) or blocked LoS. If not, you can use Indirect Fire, but it may not land in the target Interspace because of Scatter. Use the Scattering Chart on the back of the explosion Template and roll a die. A Question Mark means that you must use the Combat Values on a marker or Action Card; otherwise use those on the Explosion Template.
Scattering & Offset Grid Squares
The player who takes the Firing Action decides where the Template goes if it scatters from offset Interspaces onto the General Grid.
Figure: Scattering from offset Interspaces onto the General Grid.
Limited Range
The Unit may not fire at a target that is further than the number of indicated squares/Interspaces.
- This symbol affects Firing Actions with Special Abilities that target squares.
- This symbol affects Firing Actions with Special Abilities that target Interspaces (such as explosion Templates).
- A red triangle behind the icon means that you ignore Obstacles that block or reduce LoS.
Machine Gunner
During a Firing Action, a Unit with this ability can shoot at several enemies. All targets must be of the same type (Infantry, Light Vehicles or Heavy Vehicles) and positioned within 2 squares of at least one of the other targeted Units.
The firing Unit naturally needs to have a clear or obscured LoS to every one of the targets. Split the firing Unit's Combat Value (modified by any bonuses or penalties) so that any one of the shots taken receives a bonus of at least +1. You must announce this split and allocate the Combat Value points to the targeted Units before throwing any dice, then make separate rolls for every shot.
Each shot is separately affected by the Obstacles it crosses.
Figure: Here, the M1917 HMG performs a Firing Action using the Machine Gunner Special Ability. It starts with Unit A. Unit B is 1 square from Unit A. Unit C is 2 squares from Unit B. The M1917 HMG cannot target Unit D because it is more than 2 squares from the other targeted Units. Since the attacker must split up his total combat bonus (+3) between all targets, each shot is thus modified: A (+1), B (+1) and C (+1).
TIP: You may combine the Machine Gunner and Suppressive Fire Special Abilities.
Opportunity Fire
During (and only during) the Activation Phase, an Unactivated Unit can take a Firing Action against an enemy Unit after that enemy Unit's Firing Action.
It can also take this Firing Action at any time during the Movement Action of an enemy Unit.
If the Unit fires, it loses any Order Token it had and receives an Activated Marker.
The target Unit does not interrupt its Movement Action even if it takes a Hit, and it keeps the Movement Value of its unharmed/intact side until the end of its activation.
Sniper
Alternate Firing Action. A sniper can only target Infantry Units.
The sniper rolls a die, modified by Suppressed Markers and Obstacles, and checks the following table:
- 1: No effect.
- 2-3: Put a Suppressed Marker on the target.
- 4-5: Deal one Hit to the target.
- 6+: Deal one Hit to the target and give it a Suppressed Marker if it is not Destroyed.
If a firing table is on the Character's Recruitment Tile, use that instead of this one. If the sniper symbol is printed on a Unit's concealed side, do not turn the counter over onto its Inactive Side after a Firing Action.
Suppressive Fire
This Special Ability is one of the game's most important ones. It enables you to temporarily neutralize well protected Units or prepare an Assault by inflicting a penalty on them. Normal Firing Action rules apply, but the Unit's Combat Value, as well as all bonuses it may have, are doubled.
If the result is equal to or higher than the target's Defense Value modified by any Defensive Bonuses, the target receives no Hits but is given a Suppressed Marker instead. If the result is equal to or higher than double the target's Defense Value modified by any Defensive Bonuses, give the target two Suppressed Markers (and so on).
There is no maximum to the number of Suppressed Markers a Unit can get.
Figure: Example: a roll resulting in 7, reduced to 3 by two Suppressed Markers (-2 each).
PENALTIES RELATED TO SUPPRESSED MARKERS: Each marker inflicts a -2 penalty to ALL of the Unit's dice rolls, except Scattering and Destruction. This penalty is not subtracted from the Unit's Combat Value but from the final result of the dice roll.
Each Suppressed Marker also inflicts a -2 penalty to Movement Value. If this value drops to zero or less, the Unit is Immobilized. A Unit that is given a Suppressed Marker during its Movement Action completes its Movement Action without taking the marker's penalty into account.
IMPORTANT: Furthermore, enemy Units ignore a Suppressed Unit's Zone of Control.
6.3 - Assault Special Abilities
Assault
Only Units that have the Assault Special Ability may engage an enemy Infantry Unit or vehicle in close combat. In most cases, a vehicle does not have this ability. Any number next to the icon is added as an Assault combat bonus. Units that do not have this Special Ability can defend but will roll only one die. An X in Combat Value indicates you cannot Assault a target that has that type of defense unless you have special gear or a Special Ability.
Assault Rules
During its Movement Action, a Unit with the Assault Special Ability (the Attacker) may try to enter a square occupied by an enemy Unit (the Defender). However, the attacking Unit must have a non-X Combat Value versus the Defender's defense type. Whether the Assault is successful or not, it ends the Unit's Movement Action.
- An Assault can only be launched from an unoccupied square or square occupied by an allied vehicle that has the Transport Special Ability (see p.31). The square must be adjacent to the Defender.
- The attacker must have enough Movement Value to move INTO its target's square. An Assault is a special Movement Action; it triggers all move-related rules, including Opportunity Fire or Fire on the Move (See Move Sequence, p.37). The actual assault happens in the moment just before the movement into the target's square.
- Enemy ZoCs do not prevent a Unit from moving into a square occupied by the target Unit when it launches the actual Assault.
Put the attacking counter partly on the defending counter to denote an on-going Assault. Thus you will recall which square the attacking Unit is assaulting from. Until the Assault is resolved, the attacking Unit is considered as being in the square from which it launched the Assault.
Figure: The Unit B forbids movement inside its ZoC (red zone). The Unit A enters the ZoCs of the Units B and C, with movement 1. It can make an Assault on the Unit B while moving in the Unit's C ZoC because this movement is an Assault, and vice versa. The Unit D can bring its Support Bonus to help in an Assault.
Support Bonus
Units that are part of the same army as the Attacking Unit may provide a bonus to the Assault. To do so, they must:
- Be in the Defender's ZoC.
- Have the Assault Special Ability.
- Be Unactivated.
- Not have a Suppressed Marker.
This bonus is called Support Bonus. It adds +1 to the Attacker's dice roll per participating Unit. If you decide that a Unit is providing Support Bonus during an Assault, place an Activated Marker on it. If it had an Order Token, it is discarded. You must declare which Units are providing Support Bonus before rolling the dice.
Assault and Units with a Limited Firing Arc
When a Unit with a Firing Arc is assaulted from a square out of its firing arc, you must give it a Suppressed Marker before resolving the Assault (see Limited Firing Arc, p.13).
PENALTIES RELATED TO SUPPRESSED MARKERS: Each marker inflicts a -2 penalty to ALL of the Unit's dice rolls.
Resolving the Assault
- The Attacker rolls 2 dice, keeps the best result and adds the Combat Value appropriate to the enemy Unit's type (vs either Infantry Unit, Light Vehicles or Heavy Vehicles). The attacker also adds any other available bonus (Special Ability, Action Card, Recruitment Option, etc.) and subtracts any penalty.
- The Defender rolls 1 die (2 if the Unit has the Assault Special Ability) and keeps the best result. The defender adds the appropriate Combat Value, the Defensive Bonus provided by the Terrain Element in which it resides (unless both attacker and defender are in the same room in a building, or in the same defensive element) as well as any other available bonus (Special Ability, Action Card, Recruitment Option, etc.), and subtracts any penalty.
- If there is no Secondary Weapon, the Defender loses the assault and automatically takes one Hit (locate the Damage).
ATTENTION: A Unit that has an X in Combat Value against its Attacker's Defense Value, and no useful gear or Special Ability, is immediately Destroyed.
The player that obtains the highest result wins the assault.
Figure: Assault example with Units A, B and C.
Figure: The Attacker (A) rolls two dice, 6 and 2. He chooses the 6, adds his +2 Combat Value against Infantry Units, the +1 Support Bonus of the Unit (C) (on which an Activated Marker is placed), and a +1 bonus from the Alternate Bonus of an Action Card. He gets a total of 10. The Defender (B) rolls 2 dice because he too has the Assault Special Ability. He rolls 5 and 1. He chooses 5, adds his +1 Combat Value against Infantry Units, his +1 Assault Bonus and the +1 bonus from the Terrain Element he is in, for a total of 8. The Attacker (A) thus wins the Assault.
The Attacker Is Victorious
The Defender Is an Infantry Unit
The Unit must immediately fall back to one of the three squares opposite the Attacker. If none of these three squares can be entered, the Defending Infantry Unit is immediately Destroyed. This retreat is a Forced Move and is therefore not considered a Movement Action.
Figure: The Retreating Unit may enter an enemy Zone of Control this way, but is Destroyed if the retreat forces it to move within an enemy Zone of Control.
Figure: The Retreating Unit can't move to A because the Fukuhei and the Support Group block passage. The Movement Action B would make it move within the American Unit's D ZoC. Since there is no valid path, the Unit is Destroyed.
- If the Defender has this symbol (skull), it is Destroyed and its counter is removed from the game.
- If the Defender has this symbol facing up (flip-over skull), it takes a Hit and its counter is turned over.
After the Defender has been eliminated or has retreated (Forced Move), the Attacker must take its place. If the square cannot be entered, the attacking Unit must stay in the square from which it launched the Assault.
The Defender Is a Light Vehicle
- If the Defending Light Vehicle has this symbol (skull), it is Destroyed and its counter is removed from the game.
- If the Defending Unit was a Light Vehicle and has a Wrecked Side (flip-over skull), it is turned over in place, and becomes a Terrain Element.
When a Light Vehicle loses an Assault, it never retreats. If the Attacker was an Infantry Unit, it must return to the square from which it launched the Assault (this is a Forced Move).
See Defender Victory on the next page.
The Defender Is Victorious
The Attacker takes a Hit as explained when the Attacker is victorious. The Attacking Infantry Unit returns to the square it launched the Assault from; this is a Forced Move. The Defender does not move.
In Case of a Tie
If the Attacker is an Infantry Unit or the Defender is a Vehicle, the Defender stays in the square. The attacking Unit is pushed back into the square it launched the Assault from; this is a Forced Move. No Hit is applied.
If the Attacker is a Vehicle and the Defender an Infantry Unit, the Attacker takes the Defender's place and the Defender is pushed into an adjacent unoccupied square chosen by its owner. This is a Forced Move.
Charge
When this Unit launches an Assault, it may first take a Firing Action at its target. If the target survives, resolve the Assault. This free attack disregards range restrictions. If the Firing Action destroys the target, this Unit must end its Movement Action in the target's former square.
Pursuit
When this Unit wins an Assault, it can, if it has enough movement points left, make a second Assault against the Unit that lost the Assault and just retreated.
6.4 - Defense Special Abilities
Substitute
This Unit can suffer Hits in place of a Heavy Weapon unit (outlined in red) within 2 squares, provided it has a LoS (obscured or clear) to that other unit. This Special Ability does not work if the Heavy Weapon was Destroyed during an Assault.
6.5 - Command Special Abilities
Heroic Charge
This Unit can make a coordinated Assault:
- To give a Heroic Charge order, place an Order Token on the Unit with this Special Ability. This Unit must perform a Movement Action (see below).
- Designate up to 3 Unactivated Infantry Units with the Assault Special Ability and within 3 squares of the Unit with Heroic Charge. It must have clear or obscured LoS to each of them, and they must be Unactivated.
- All these Units (including the original) will then take a Movement Action that must end adjacent to an enemy Unit against which they will perform an Assault. If they cannot end their Movement to be adjacent, they receive 2 Supp. Markers.
- Resolve each Movement Action and Assault separately, in the order you choose.
- Put an Activated Marker on each of the Units that joined the Charge and remove any unrevealed Order Tokens if they had one.
Initiative
In the case of two Activated Units with the same Numbered Order Token, the Unit of the player with the Initiative Special Ability will act first. If both have it, the player with the Initiative will act first.
Messenger
If this Unit received either a Numbered or Special Order Token during the Order Phase, it may, at the beginning or end of its Movement Action, transfer that token to a friendly Unit in its ZoC. That Unit will be Activated immediately. Place an Activated Marker on the Unit with the Messenger Special Ability.
NCO
This Unit has an NCO among its members or is itself an NCO. As long as you have an NCO on the board, you always have at least one Order Token. If this Unit receives an Order Token during the Order Phase, it may immediately remove 1 Suppressed Marker from another Unit in a clear LoS and within 3 squares.
Order(s)
This Special Ability provides as many additional Numbered Order Tokens as the number of stars in the symbol. If the Unit is Destroyed, adjust your amount of Numbered Order Tokens accordingly at the start of the next Order Phase.
6.5 - Command Special Abilities (continued)
Radio
Marked as new or modified for the Pacific war. As long as this Unit is in play, any Aircraft, Order Options, or Doctrine Cards bearing this symbol can be used.
Scout
After deploying your army in your deployment area or off the battlefield, Units that have this Special Ability may take a Movement Action equal to the number printed in the symbol. This Movement Action disregards difficult passages.
- If the Unit has the Ambush Special Ability, this move may be done without revealing the Inactive Side to your opponent.
- However, it cannot end its movement in a square adjacent to an Objective (primary, secondary or bonus) or in the area of the Objective (for example a building).
- It may not take a Firing Action or make an Assault during this Movement Action.
- A Vehicle that has the Transport (here Transport 2) Special Ability and wishes to use its Scout (here Scout 3) Special Ability can only embark troops that have the Scout Special Ability. Embarked Units cannot use their own Scout Special Ability.
6.6 - Movement Special Ability
Amphibious
A Unit with this Special Ability can enter Water squares. If the Amphibious symbol is surrounded by a red border, the Unit is exclusively aquatic. This means that the Unit can only move in Water squares.
6.7 - Other Special Abilities
Gun
This Unit is a Gun. Some rules and options are specific to it.
Transport
This Vehicle can transport Infantry Units. Use the following specifics to determine how many Units it can embark:
- Units that have this symbol (skull) on their visible side, as well as Characters, count as 1.
- All other Units (flip-over skull) count as 2.
Vehicles that have the Transport Special Ability cannot transport more than one larger-than-one-square infantry counter (such as Guns).
During the Activation or Supply Phase, at the beginning or end of its Movement Action, an Infantry Unit can move into (or out of) a Vehicle from (or into) an adjacent square. However, it cannot disembark into an enemy ZoC.
- A Unit inside a Vehicle can neither be affected by an explosion Template nor be targeted by a Firing Action or an Assault.
- A Unit that is on board a Vehicle can receive an Order Token. It can therefore fire from the Vehicle or move off it. Draw the LoS for the embarked Unit from one of the squares the Vehicle occupies.
- Infantry Units do not block LoS for embarked Units.
- Heavy Weapon Units (red outline) cannot fire from a Vehicle unless they have the Fire on the Move Special Ability, in which case the corresponding penalty does not apply.
- It is possible to launch an Assault from a Vehicle that has the Transport Special Ability. It is also possible to retreat into a transport after being defeated in Assault, whether as Attacker or Defender.
- An Infantry Unit inside a Vehicle exerts no ZoC.
Destroyed Vehicle
When a Vehicle is Destroyed, Units inside suffer no Hit but must be redeployed in unoccupied squares adjacent to the Wreck. This is a Forced Move. They must be deployed on their Inactive Side when the Vehicle is Destroyed. They may not be redeployed in a square within an enemy ZoC. The player who owns these Units chooses where to redeploy them.
Put a Suppressed Marker on each of them. If there is no free square, outside any enemy ZoC, the Unit is Destroyed in the explosion.
7 - Recruitment Options
There are 5 types of Options: Support Options, Gear Options, Character Traits, Orders and Customizations.
A Gear Option, or Character Trait, placed on a Recruitment Tile benefits only those Units bearing the Coloured Stripes specific to that Recruitment Tile. This includes the Units on the Recruitment Tile itself, as well as the Support Options slotted in the Recruitment Tile. Other Units with different Coloured Stripes may not benefit from or use this option.
A Gear Option, or Character Trait, placed on a Command Tile benefits all Units in your army, unless the Command Tile is a Tactical Command Tile (a Recruitment Tile with an Organization Arrow). In this case, the Support Option benefits only the Units on the Tactical Command Tile and the Units within that Company.
Figure: "What's Behind It?": Gear, Character Trait and Order options are Japanese or American; Customization is Common.
7.1 - Support Tile
The Support Tile is only used in scenarios to integrate one Recruitment Option into an army by overriding the rules of Recruitment, or to simulate a Recruitment Option requiring the placement of an Order Token.
7.2 - Support Options
These are Infantry Units, cannons, or Vehicles added to the combat group on the Recruitment Tile. As is the case for Recruitment Tiles, the illustrations on Support Options indicate which counters and markers you can deploy when this tile is included in your army. If the Support Option provides markers (Character Trait, Gear...), they can only be used by Units on the Support Option.
Figure: Recruitment Option (Support): Squad A. Name (printed in white); Option Stripes; Composition of the Combat Group; Breaking Point (here 3, flip over the Option; the number of victory points is printed in red on the back of the tile); Cost (expressed in Army Points).
7.3 - Gear Options
Gear Options yield specific gear to your combat groups.
REMINDER: Only Units displaying the colour stripes specific to the Recruitment Tile in which the gear option is slotted can benefit from it. Units displaying stripes of other colours cannot benefit from this option or use it.
REMINDER: If the gear option is on a Command Tile, every Unit in your army benefits from it.
If your army includes a Gear Option, take the number of markers indicated and put them on the Gear Option. Each marker can be used once during the game to receive the benefit of that Gear Option. Once the markers run out, you can no longer use the Gear Option.
IMPORTANT: You must declare that you are using the marker before your action or before any dice roll (yours or your opponent's). Unless the Gear Option specifies that it is an Alternate Firing Action, you may use up to 3 identical markers on the same action.
Figure: Recruitment Option (Gear) template: Option stripes; Name (printed in red); Effect (here, take 3 Ammo markers and put them on the option); Cost (expressed in Army Points).
Ammo
Restricted to Infantry. This option gives you 3 Ammo markers. Each Ammo Marker grants a +1 bonus to your Combat Value during a Firing Action (regular or Alternate) against Infantry Units.
Camo
Restricted to Infantry. This option gives you 3 Camo markers that give a +1 bonus to the Defense Value of an Infantry Unit. This option does not work if the Unit is hit by an Explosion Template.
Grenades
Restricted to Infantry / Alternate Firing Action. This option gives you 3 Grenade markers. A grenade's max range is 2 Interspaces.
- You can throw a grenade over Terrain Elements as long as you do not exceed the range. The Combat Values are printed on the back side of their respective markers.
- Place the explosion Template on the target Interspace. Use the Combat Values of the Grenade marker to resolve this Alternate Firing Action. There is never any scattering.
Units even partially under the Template are affected. Resolve every attack individually.
Figure: Unit A benefits from the Defensive Bonus granted by the Terrain Element for a total Defense of 5. Thanks to the Action Card alternate bonus, the attack result is 7. Since this total is higher than the Defense, the attack Hits! Unit B is not in a Terrain Element, but the total of the attack (3) is less than the Defense Value (4).
Grenades & Defensive Elements
Units that are inside a Defensive Element and under an outside Explosion Template are affected by the blast but receive the Defensive Bonus from the element (A). If a Unit is on a square adjacent to a Defensive Element, it can throw a grenade inside the element and directly onto a square (not an Interspace) (B). The explosion is contained inside the Terrain Element and does not affect squares outside of it. Any Units inside the element do not receive the Defensive Bonus (X).
Grenades & Buildings
Units inside a Building are not affected by an Explosion Template if the Template is on an Interspace outside the Building.
Figure: To throw a grenade into a Building, position the Unit on a square adjacent to an Opening (A). The Building does not provide a Defensive Bonus against such a grenade, so all Units inside are affected.
Figure: When throwing a grenade out of a Building, the first Interspace to count is the one on the half-square in front of the Opening.
Grenades & Offset Grid Squares
Figure: Disregard the difference in distance between General Grid Interspaces and Offset Grid Interspaces.
To determine range, simply count any Interspaces you encounter between the grenade thrower and the target. Include the target Interspace in the range.
Tanto
Restricted to Infantry. This Option gives you 3 Tanto markers that give a +1 bonus to your dice roll during an Assault.
7.4 - Character Traits
Character Traits are elite troops specialties.
WARNING: Only Units displaying the colour stripes specific to the Recruitment Tile in which the Character Trait Option is slotted can benefit from it. Units displaying stripes of other colours cannot benefit from this option or use it.
If markers are shown on the option tile, take as many of them as indicated and put them on the Recruitment Option.
EXCEPTION: If the Character Trait is on a Command Tile, every Unit in your army benefits from it.
Figure: Recruitment Option (Character Trait) template: Veteran. Option Stripes; Name (printed in red); Effect (here, take 3 Veteran markers and put them on the option); Cost (expressed in Army Points).
Concealed
Restricted to Infantry. This Order Option gives you 2 Concealed markers.
- During deployment, or later at the beginning of any Supply Phase (before you move your Units), you can assign a Concealed marker to an Infantry Unit.
- Replace the Unit with the Concealed marker and put the Unit next to its Recruitment Tile along with the small marker bearing the same letter as the Concealed marker.
- The Concealed marker will now behave as an Infantry Unit with the Ambush Special Ability.
- If the Ambush Unit is spotted (and is flipped to its Inactive Side), replace the Concealed marker with the corresponding Unit counter. You can use the Concealed marker again in the next Supply Phase.
Defense Expert
This Character Trait allows its Tactical Command Tile to draw a second Doctrine Card at the start of the game. Both of these cards can be in play at the same time, if applicable.
Gung Ho
This Character Trait gives you 3 Gung Ho markers. Each marker can be used to ever gain a +1 bonus in an Assault, a +1 bonus on a Firing Action, or to remove an Extra Suppressed Marker from one of your Units (during the Supply Phase).
Ichiki Butai
This Character Trait gives you 3 Ichiki Butai markers. During a Firing Action against one of your Units, you may spend an Ichiki Butai marker to get a +2 bonus to your Unit's Defense Value. You must announce this before your opponent's dice rolls. If your Unit is not Destroyed as a result of the Firing Action, it gains a Suppressed Marker.
Kuma Battalion
This Character Trait allows its Tactical Command Tile to draw a second Doctrine Card at the start of the game. Both of these cards can be in play at the same time, if applicable.
Semper Fi
This Character Trait gives you 3 Semper Fi markers. Each marker can be used to gain a +1 bonus to any dice roll.
Veteran
This Character Trait gives you 3 Veteran markers. Each marker enables you to reroll any dice roll, yours or your opponent's, if you don't like the result. You may use a Veteran marker on a dice roll you've just rerolled. Apply the result of the last reroll.
7.5 - Order Options
Headquarters' planning and strategy is reflected by Order Options that provide bonuses for your whole army.
These options have "command stripes" that limit them to Command Tiles (those with laurels).
Figure: Recruitment Option (Order Option) template: Bluff. Command Stripes; Name (printed in yellow); Cost (expressed in Army Points); Effect (you get an additional Bluff Order Token every turn).
Aircraft
Marked as new or modified for the Pacific war. This Order Option allows you to recruit 1 aircraft (see Aviation Rules p.18). To activate an Aircraft you must have a Unit with the Radio Special Ability still in play.
Artillery
Marked as new or modified for the Pacific war. This Order Option gives you 3 Artillery Support markers. To use an Artillery Support marker you must have a Unit with the Radio Special Ability still in play. You must place a Numbered or Special Order Token on its Recruitment Option if you want to use an Artillery Support marker. When you Activate this option, put an Explosion Template on any Interspace on the battlefield. The Scattering Distance for this attack is 3 Interspaces.
Battle Plan
This Order Option gives you 1 Special Order Token for the whole game. You may not have more than 2 Special Order Tokens.
Bluff
This Order Option gives you 1 additional Bluff Order Token. You cannot have more than 2 Bluff Order Tokens.
Concealed
See Concealed, p.34.
Pillbox
These Order Options give you 1 or 2 Pillboxes.
REMINDER: A Pillbox can rotate in place by performing a zero Movement Action (see Movement Value X p.09).
Planning
This Order Option gives you 1 additional Numbered Order Token.
WARNING: You may not have more than 10 Numbered Order Tokens.
Radio
This Order Option gives you 1 additional Radio Unit.
7.6 - Customizations
A Customization is a special Recruitment Option that can only be used by Characters. A Character is the main counter of a Recruitment Tile (and not one given by an Option), and may be a 'leading role' or the Recruitment Tile's officer (indicated by a Yellow Outline). If the Customization gives markers (such as grenades), their use is limited to the number of markers. Customizations that give one or more markers can benefit any Unit in your army if the option is on a Command Tile.
WARNING: A Vehicle never benefits from a Customization.
Figure: Recruitment Option (Customization) template: Life Point. Option stripes; Name (printed in white); Effect (here, take 1 Life Point marker and put it on the option); Cost (expressed in Army Points).
Initiative
Restricted to Characters. This customization gives you the Initiative 1 Special Ability.
Katana
Restricted to Characters. This Customization gives you a +2 bonus to your dice roll during an Assault.
Life Point
Restricted to Characters. This Customization provides 1 Life Point marker. Discard it to cancel a Damage or Hit the Unit just received. If the Unit is going to take a Double Hit, you may discard 1 Life Point marker to cancel one Hit of the two.
Overwatch
Restricted to Characters / Alternate Firing Action. This customization gives you the Opportunity Fire Special Ability.
Shotgun & Type 100 SMG
Restricted to Characters / Alternate Firing Action. These Customizations are Alternate Firing Actions.
8 - Reference
8.1 - Game Turn
1 - Order Phase
Step 1 - Resolve all Start of Order Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
Step 2 - Count the number of Order Tokens you are entitled to:
Each Game Turn, you get a number of Numbered Order Tokens equal to the sum of all Order stars from any Officers, as well as Personal Orders, Order Options, or Recruitment Tile Special Abilities. Starting with Order #1, take the consecutive Numbered Order Tokens up to your maximum Order total.
SUDDEN DEATH: If a player has no Order Token to assign to his Units (except for Bluff), that player immediately loses the game.
Step 3 - Place your Order Tokens so you can read the numbers and your opponent cannot.
No more than a single Order Token per Unit! The player who has the Initiative places all his Order Tokens on any Units in his army, then his opponent does the same. Players may decide to place their Order Tokens simultaneously.
Step 4 - Resolve all End of Order Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
2 - Activation Phase
Units with a Numbered or Special Order Token may take a Movement or Firing Action.
3 - Supply Phase
Step 1 - Resolve all Start of Supply Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
Step 2 - Each player retrieves all Bluff Order Tokens from their Units.
Step 3 - The player who has the Initiative plays first and must take the following actions in the following order:
- Move all or part of the Units in his army that have no Order Token (other than Bluff) or Activated Marker.
- Discard one (and only one) Suppressed Marker per Unit.
Step 4 - Once the player with the Initiative is done, the opposing player must also complete Step 3.
Step 5 - Resolve all End of Supply Phase effects in the following order:
- Special Abilities (see p.24).
- Action & Doctrine Cards (see p.16-17).
- Recruitment Options (see p.32).
- Scenario Specific Effects.
Step 6 - Retrieve all Special and Numbered Order Tokens.
Step 7 - Discard as many Action Cards as you wish, then draw until you reach your maximum hand size as indicated by the scenario.
Step 8 - Turn over any Doctrine Cards that were used this turn.
Step 9 - Move the Initiative marker one notch down the Turn Chart, and turn it over to determine the new Initiative. The other player will have Initiative for the next Game Turn.
You may start a new turn!
8.2 - Reminders
Movement Sequence (p.09)
Step 1 - Declare Movement Action.
- Possibility of Fire on the Move.
- Possibility of Opportunity Fire (if Fire on the Move).
Step 2 - Move 1 square or Change of State on the spot (zero move).
- Check whether a concealed moving Unit should be turned over and revealed.
- Possibility of Fire on the Move.
- Possibility of Opportunity Fire.
- Repeat this movement sequence until the end of the Movement Action.
Step 3 - End of the Movement Action.
- Resolve any Assaults.
- Check whether enemy concealed Units should be turned over and revealed.
Firing Resolution (p.12)
Step 1 - Declare type of fire (normal or Suppression) and name target.
Step 2 - Calculate the modified Combat Value.
- Combat Value of the Unit.
- Fire on the Move penalty (if the Unit uses the Fire on the Move Special Ability).
- Miscellaneous bonuses (gear, Action Cards, etc.).
- Double the Combat Value (if the Unit uses the Suppressive Fire Special Ability).
- Split the Combat Value (if the Unit uses the Machine Gunner Special Ability).
Step 3 - Roll 1 die (2 if the Unit has the Dual Weapon Special Ability).
Step 4 - Choose the best single die of all dice rolled.
Step 5 - Subtract penalties from final result of dice roll (Suppressed Markers, Range, Obstacles, Action Cards, etc.).
Step 6 - Apply Damage/Hit or give markers.
Long Range Shot (p.13)
Shots over 7 squares are considered long range and suffer a -2 penalty to the final result of the dice roll.
Lines of Sight (p.21)
- A clear LoS is one that does not cross any Obstacles.
- An obscured LoS is one that passes through one or more Obstacles that do not block LoS but which provide limited cover, such as Jungle.
- A blocked LoS is one that passes through an Obstacle that does block LoS.
Penalties Related to Suppressed Markers (p.15)
- Each Suppressed Marker inflicts a -2 penalty on all the Unit's dice rolls EXCEPT for Destruction (p.24) and Scattering (p.27). This penalty is not deducted from the Unit's Combat Value, but from the final result.
- Each Suppressed Marker inflicts a -2 penalty to the Unit's Movement Value. If a Unit's Movement Value drops to 0 or less, the Unit is Immobilized.
IMPORTANT:
- Enemy Units ignore the Zone of Control of any Unit with a Suppressed Marker.
- A Unit that receives a Suppressed Marker during its Movement Action completes the Movement Action without applying the Suppressed Marker's penalty.
A Unit Receives One or More Suppressed Markers When
- (Infantry) A Vehicle ends its Movement Action in the Unit's square.
- (Infantry) The Vehicle/Building which holds the Unit is Destroyed.
- It is Hit by a Suppressive Fire.
- It is Not Hit by a Frightening Shot.
- It is overlapped by a Flamethrower Template.
- An Action/Doctrine Card effect causes it.
8.3 - Keywords
- Activated Marker: Marker used to indicate that a Unit has been Activated without previously receiving an Order Token.
- Activated Unit: A Unit that has already acted. It is indicated by a revealed Numbered or Special Order, or by the presence of an Activated Marker.
- Activation Phase: Phase of the game during which the players activate the Units that received an Order Token.
- Active Side: When a Unit can change states, the Active Side represents the Unit in a particular state.
- Alternate Firing Action: Firing Action provided by a Special Ability or a Recruitment Option that cannot benefit from the Unit's Special Abilities.
- Bluff Order Token: Blank Order Token that does not provide an activation but whose purpose is to trick the opponent.
- Change of State: Various Special Abilities that enable a Unit to turn over once per Movement Action, at the start or at the end, in order to change states (such as from Inactive to Active).
- Character: The leader or the main character of a Recruitment Tile.
- Combat Value: Bonus to the Unit's dice roll in a Firing Action or an Assault.
- Command Tile: Special Recruitment Tile that represents a superior officer. It is indicated by the laurels framing the title of the tile.
- Damage: Damage is suffered by a Heavy Vehicle. A dice roll is required to locate the Damage and determine its effect.
Icon Summary
Editorial note: the printed Icon Summary (last page) is a reference table of icon names and page references that restates the chapters above. It is transcribed here as a text list of the same entries.
- Terrain Effects (p.20-22): Defensive Bonuses (+1, +2, +3) add a bonus to the Defense Value of each Infantry Unit in one of its squares. Canopy increases the associated Defensive Bonus if the Firing Action is performed by an Aircraft Unit, excluding Alternate Firing Actions (Bomb). Difficult Passage: once a Unit enters this element, it must stop its Movement Action immediately. Holes: Infantry Units in a Hole Terrain Element do not block the LoS of Infantry Units outside it. Lines affect the Firing Actions of Units not adjacent to it, but not those of Units adjacent to it; a Line affects Movement Actions that cross it. Contour Lines (p.21): a Contour Line is one that separates two areas of different elevation. Impassable (p.21): no Unit can enter this element. Impassable to Infantry, Light or Heavy vehicles (p.21): this element is impassable to the types shown. Obstacles (p.21): this element totally blocks LoS or interferes with LoS that cross it (Obscured LoS). A penalty in a yellow triangle is only applied if the target is an Infantry Unit. Structures (p.22): in order to destroy these, you must inflict the number of Destruction Points printed within the symbol. Water (p.22): Units without the Amphibious Special Ability are Destroyed if they enter this element.
- Special Abilities (p.24-28): Changes of State (p.24): Overwatch (while active, your Unit benefits from the Opportunity Fire Special Ability); Ambush (flip the counter to conceal this Unit); Tripod (flip the counter to deploy/pack the weapon). Firing Special Abilities (p.24-25): Ammo Boy (this Unit gives a +1 bonus to all Firing Actions of friendly Infantry Units in its ZoC). Anti-Aircraft (p.19/24): the Unit may take a Firing Action against an Aircraft Unit. Artillery Spotter (p.25): the Unit reduces the Scattering Distance by 1 Interspace. Destruction (p.25): roll a number of dice equal to the value. On 4+, place a Destruction Marker. Dual Weapon (p.25): during a Firing Action, roll two dice and keep the best result. Fire on the Move (p.25): the Unit may fire while moving. Flamethrower (p.25): the Unit may use a flamethrower Template. Frightening Shot (p.25): after missing a shot, place a Suppressed Marker on your target. Howitzer (p.26): the Unit may use an Explosion Template. The Unit needs LoS. Indirect Fire (p.26): the Unit may use an Explosion Template. The Unit does not need LoS. Limited Range (p.26): shots cannot be made beyond the number of squares/Interspaces. If a red triangle is placed behind the icon, it means that you are ignoring Obstacles that block or reduce LoS. Machine Gunner (p.27): the Unit may divide its Combat Value among multiple targets. Opportunity Fire (p.27): the Unit may take a Firing Action against an enemy Unit that just performed a Movement Action or a Firing Action. Sniper (p.27): 1: no effect; 2-3: one Suppressed Marker; 4-5: one Hit; 6: one Hit plus one Suppressed Marker. Suppressive Fire (p.27): the Unit may double its Combat Value to suppress its target.