Hearts of Iron: The Board Game
Hearts of Iron: The Board Game Rulebook
Table of Contents
Table of Contents
Game Components
Units and Generals
There are three countries within Hearts of Iron: The Board Game, each with their own unique miniatures, generals, and playstyle. The countries within this set are:
- The United Kingdom: Infantry, Tanks, Ships, Planes, General Standees
- The German Reich: Infantry, Tanks, Ships, Planes, General Standees
- The Soviet Union: Infantry, Tanks, Ships, Planes, General Standees
Cards
- Engine Cards: Each country has five engine cards, providing a country with resources and additional effects when played.
- Focus Cards: Each country has their own focus cards, divided into sets, each detailing the political decisions available to a country during the game.
- Research Cards: Research cards present additional technologies each player can research for their country.
- Event Cards: These provide unique effects that affect gameplay, as well as providing additional effects to countries that are not currently in play.
- Reference Cards: Succinct reference cards that remind players of the key rules during various phases of the game.
The Action Phase reference card lists the following, as printed:
Each player completes each action before moving on to the next:
- Construction: May spend 2 manpower to construct a factory in any region you control that does not already contain a factory.
- Research: May progress a new research card. Add one progress token to an in-progress research card. Spend manpower to add an equal amount of progress tokens.
- Focus: May progress a new focus card, then add one progress token to an in-progress focus card. Spend political power to add an equal amount of progress tokens.
- Production: Spend production to produce units and place them on unit cards.
- Deployment: Spend manpower to deploy available units to any region you control, or an allied country controls.
Note: the reference card says each action is completed "before moving on to the next", while the Action Phase section (below) says the players perform the steps simultaneously. Both are transcribed as printed.
Tokens
- Flag Tokens: Flag tokens show which countries control the regions on the game board, as well as the country relationships on the political board.
- Ideology Tokens: Double-sided ideology tokens used to track the ideology of countries on the political board.
- Factory Tokens: Factories allow players to produce units.
- Command Tokens: Used to move units on the game board.
- Soft Attack / Hard Attack Tokens: Double-sided tokens used to track the increases of strength of areas on the game board.
- Progress Tokens: Used to track the progress of research and focus cards.
- Round Token: Used to track the current round of the game.
- First Player Token: Used to show who goes first each round.
Game Elements
- Country Boards: The country boards fit together with the ideology boards, showing each country's unique traits and additional scoring opportunities.
- Ideology Boards: The ideology boards fit together with the country boards, providing each country with further traits and additional scoring opportunities.
- Political Board: A board to manage and track the alliances and wars between countries in the game.
- Game Board: A board showing all playable regions in the European theatre of war.
- Dice: Five custom six-sided dice in three different colours used to determine the outcome of battle.
- Cubes: Used by players to track their resources on their player board.
- Player Board: Used by players to track their country's resources.
- Score Board: A board used to track each player's total victory points.
How to Win
Hearts of Iron: The Board Game is a competitive historical board game for 2-5 players. Each player leads a country during the World War II era, starting with one key choice: re-enact history as it happened, or lead your nation in a new direction and play out a completely alternative history.
Players score victory points by controlling regions on the map, fulfilling scoring criteria unique to their country and its ideology, and their chosen endgame scoring condition.
Each game is divided into six rounds, each represented by a year, from 1939 to 1945.
At the end of 1945, the player with the most victory points wins!
Game Setup
Playing Area Setup
- Place the game board in the centre of the playing area.
- Place the political board to one side of the game board.
- Place the score board near the game board.
- Take the event cards and shuffle them together to create an event deck. Place this deck face down near the game board.
- Place the turn token in the 1939 slot of the turn track, found in the top left of the game board.
- Place a supply of tokens within reach of all players.
- Randomly determine a first player and give them the first player token.
Player Setup
Gather Components
Each player chooses one of the available countries to play. Each country can be identified by its flag or country colour on its components. The countries available in this set are:
- The United Kingdom
- The German Reich
- The Soviet Union
Each player takes a player board, a set of reference cards, and the following components for their chosen country:
- Country Board
- Ideology Boards
- Starting Unit Cards
- Engine Cards
- Research Cards
- Focus Cards
- Flag Tokens
- Command Tokens
- Factory Tokens
- Unit Miniatures
- General Standees
Determine Ruleset
Split the focus cards into sets. One set is generic, used every game, while the others are named after the title of their endgame scoring focus card. Choose one of the latter sets, then choose one of the ideologies listed on its endgame scoring focus card and take the matching ideology board. Besides for the generic and chosen sets, return any other focus card sets to the game box.
If this is your first game, we recommend the following focus card sets and ideology board combinations:
- United Kingdom > Mediterranean Bastion > Facism [sic]
- German Reich > Return of the Kaiser > Theocracy
- Soviet Union > Baltic Security > Communism
Set Up Player Area
- Take a player board and place it in front of you.
- Place each starting unit card in a row below.
- Starting resources and units can be found on the back of your country board.
- Place a cube on each of the trackers on the player board matching the starting value of that resource.
- Take a number of factory tokens matching the starting units and place them to the side of your player board.
- Take a number of each type of unit matching the starting units and place them on their respective starting unit card.
- Place the country and ideology boards together to form a single board and place your combined board to the side of your player board.
- Place your endgame scoring focus card to the side of your combined board.
- Place the generic set and the rest of the chosen focus card set together in a pile to form your focus deck.
- Place the general standees to the side of your focus deck.
- Place the research cards in a pile to the side of your starting units.
- Place the engine cards in a pile to form your hand.
- Take your command tokens and remove one single move token. Place the rest face down to the side of your player board.
- Place the remaining command token off to one side, along with your remaining units, factory tokens, and flag tokens.
- Finally, place one of your flag tokens on the 0 space of the score track.
Game Concepts
Game Board
The game board is made up of multiple land and sea regions. Every land region is represented by a region identifier within a region border. If a region border is shared between two regions, those regions are adjacent. If an area of a map doesn't have a region identifier or border it can't be entered.
The arrows show the adjacency between land and sea regions.
Major and Minor Countries
Each country that is being played by a player is a major country. Any other country in the game is a minor country.
Example: Jamie is playing the German Reich and Steph is playing the Soviet Union. Both are major countries for this game. The United Kingdom is not being played by anyone and is a minor country for this game. Iceland can't be played as a major country and will always be a minor country.
Country Regions
Each land region of the game board begins the game as a country region pertaining to a given country. These country regions are shown by their identifying flag and by the region codes shown on that country's row on the political board. For example, regions [L10] - [L12] are the country regions of France. For major countries, these are sometimes referred to as their starting regions.
Controlling Regions
Throughout the game, players will move their units across the board and expand their territory by taking control of more regions. Each type of region has different conditions that determine which country it is controlled by. Controlling regions on the game board also influences the state of the political board. If a major country controls every country region of a country, that country is controlled.
Land Regions
Land region key (as printed on the page):
- Region's Flag: Shows who currently controls the region. When a player takes control of this region, they place their flag token over this space.
- Region Code: This numerical code is used whenever a rule needs to refer to this region.
- Width: How many units can be in the region per player.
- Soft Attack: The soft attack value for this country in a region battle.
- Hard Attack: The hard attack value for this country in a region battle.
- Resources: Any resources the region provides to a player whilst under their control.
- Capital Region Star: This region is a capital region and provides additional victory points whilst controlled.
Controlling Land Regions
Countries control a land region if their flag is shown on that region.
Countries take control of a land region that belongs to a country they are at war with by winning a region battle for control of that region (see page 31). When taking control of a region, remove any previous flag tokens covering the region's flag, then place your flag token over it instead. If the region contained any factories, return them to the original owner's supply.
Soft Attack and Hard Attack Tokens
Some effects might cause the strength of a land region on the game board to increase. Place soft attack and hard attack tokens in the region to reflect these effects as appropriate. A region can contain multiples of the same token, in which case the effect is cumulative.
Sea Regions
Sea region key (as printed on the page):
- Region Code: This numerical code is used whenever a rule needs to refer to this region.
Sea Region Width
Sea regions don't have a limit to the number of units that can be in the region.
Controlling Sea Regions
Countries control a sea region provided it only contains friendly and allied units at the end of the conflict phase, with two or more countries sharing control of the region if required.
When counting the number of regions a player controls, ignore sea regions, unless otherwise stated.
Supply Line Regions
A supply line region is a unique type of region that counts as a sea region for the purpose of placing units, but is controlled and provides resources as though it were a land region.
Supply line region key (as printed on the page):
- Region's Controller: Shows who currently controls the region. When a player takes control of this region, they place their flag token over this space.
- Region Code: This numerical code is used whenever a rule needs to refer to this region.
- Width: Supply regions don't have a limit to the number of units that can be in the region.
- Soft Attack: Supply regions don't have a soft attack value.
- Hard Attack: Supply regions don't have a hard attack value.
- Resources: Any resources the region provides to a player whilst under their control.
Controlling Supply Line Regions
Countries control a supply line region like a sea region, though, in doing so, they place one of their flag tokens on it in the same way as they would a land region. Unlike a sea region, if two or more countries are allied and have units in a supply line region at the end of the conflict phase, they must decide amongst themselves who will take control of the region.
When counting the number of regions a player controls, ignore supply line regions, unless otherwise stated.
Political Board
The political board is used to show the standings between each major country and the other countries in the game.
Political board key (as printed on the page):
- Country Flag
- Country Name
- Country Region Code: At the start of the game these regions are controlled by this country.
- Ideology: The icon showing what ideology that country has: Democracy, Fascism, Communism, or Non-aligned.
- Aggression Track: Tracks the aggression between countries. a. The left side of the track is the war side of the track, with the leftmost slot indicating that the countries are at war. b. The right side of the track is the alliance side of the track, with the rightmost slot indicating that the countries are allied.
- Controlled: Used to show if a country is completely controlled and thus eliminated from the game board.
Aggression
Each country has an aggression track, and each of the major countries place their flag tokens on these tracks, which move left and right to indicate their standing with that country.
Increasing Aggression
When a major country increases aggression with another country, they move their flag token on that country's aggression track to the left.
If the ideologies of the two countries match, they only move it one space, but if their ideologies don't match, they move it two spaces instead.
If there isn't a flag token on that country's aggression track already, place one in the rightmost slot of the war side. This placement is equivalent to moving the token one space to the left.
Example: The United Kingdom is increasing aggression against Latvia. They move their flag token one space to the left onto the first slot of the war side of the aggression track. Both countries have different ideologies, with the United Kingdom being a democracy and Latvia being non-aligned, so the United Kingdom then moves their flag one more space to the left, bringing the increase of aggression to a total of two.
Decreasing Aggression
When a major country decreases aggression with another country, they move their flag token on that country's aggression track to the right.
If the ideologies of the two countries match, they move it two spaces, but if their ideologies don't match, they only move it one space instead.
If there isn't a flag token on that country's aggression track already, place one from the supply in the leftmost slot of the alliance side. This placement is equivalent to moving the token one space to the right.
Example: The German Reich is decreasing aggression against Ireland. They don't currently have a flag token on the aggression track for Ireland. They place one of their flag tokens on the first slot of the allied side of the aggression track, representing a decrease in aggression of one. Both countries have different ideologies, with the German Reich being fascist and Ireland being democratic, so they don't get to decrease aggression an additional time.
Standings
There are three standings between countries: allied, neutral, and at war.
Allied
If a major country's flag token is in the allied slot of another country, they are allied. They can now deploy units in that country's regions as though the regions were their own.
A country might become allied with another country by decreasing aggression enough for their flag token to reach the allied slot of that country's aggression track.
They might also become allied directly through another effect. In this case, move their flag token to the allied slot, or, if there isn't a flag token on that country's aggression track already, place one from their supply there.
Any units belonging to a country you are allied with are considered allied units.
At War
If a major country's flag token is in the at war slot of another country, they are at war. They can now start battles with that country's units and the regions they control.
A country might become at war with another country by increasing aggression enough for their flag token to reach the at war slot of that country's aggression track.
They might also become at war directly through another effect. In this case, move their flag token to the at war slot, or, if there isn't a flag token on that country's aggression track already, place one from their supply there.
Any units belonging to a country you are at war with are considered enemy units.
Neutral
If a major country isn't allied or at war with a country, they are considered neutral with that country, even if they don't have a flag token on their aggression track.
A country might become at war with another country by increasing aggression enough for their flag token to reach the at war slot of that country's aggression track.
A country might become neutral with another country by increasing or decreasing aggression between them enough for their flag token to move to any slot other than the allied slot or the at war slot of that country's aggression track.
They might also become neutral directly through another effect. In this case, simply remove the flag token from the aggression track for that country.
Any units belonging to a country you are neutral with are considered neutral units.
Controlling Countries
If a major country controls every country region of a country, that country is controlled.
When a major country takes control of a country, move their flag token to the controlled slot to the far left of that country's row, or, if there isn't a flag token on that country's aggression track already, place one from their supply there.
Once a major country has taken control of a country, if they then lose control of all of those country regions, remove their flag token from the controlled slot and place it in the at war slot of the aggression track for that country.
Major Countries Changing Standing
If one major country increases or decreases aggression with another major country, this change is reflected on each of their aggression tracks with the other's flag token. If this or any other effect causes one major country to change standing with another major country, both countries adopt the new standing.
Example: The United Kingdom increases aggression with the Soviet Union. Since both countries have a different ideology from each other, the flag token moves left two spaces. Both countries are now at war with each other. If both are major countries, as the United Kingdom flag token moves up into the war slot on the Soviet Union aggression track, a Soviet Union flag token should also move in the same way on the United Kingdom aggression track.
Minor Countries Changing Ideologies
Focus cards and other effects may cause a minor country to change ideology. Only minor countries can change ideology. When changing a minor country's ideology, take the ideology token to match the new ideology and place it on the political board over the ideology icon of that country.
Player Boards
Player boards are used in combination with cubes to track the various resources that a player's country currently has.
Player board key (as printed on the page):
- Stability Track: Used to track the stability of the player's country.
- Political Power Track: Used to track the political power of the player's country.
- Production Track: Used to track the production of the player's country.
- Manpower Track: Used to track the manpower of the player's country.
- Round Reference: A reference of phases and steps during a round of play.
Managing Resources
Whenever a player needs to increase a resource's value, move the cube on that resource track one space to the right for each amount they need to increase it by. A player can never exceed the highest value shown on each track. Any resources gained that exceed this amount are lost.
Whenever a player needs to decrease a resource's value, move the cube on that resource track one space to the left for each amount they need to decrease it by. A player can never have less than 0 of a resource. Any resources lost that would take them below 0 are ignored.
Spending Resources
Players will need to spend resources to pay for a variety of actions and effects as they play. Whenever a player spends any resources, reduce their resources by the same amount. The player must be able to pay the full amount required, otherwise they can't spend the resources for that effect.
Victory Points
Throughout the game, players score victory points from the additional scoring rules on their country and ideology boards, as well as from their focus cards, and by controlling other countries' capital regions.
Whenever a player scores victory points, move their flag token that many spaces up the score track.
At the end of the game, each player will score victory points from the effect of their endgame scoring focus card set (see page 34).
Gameplay
Round Sequence
Hearts of Iron: The Board Game is played in rounds. In each round, players will resolve a number of phases.
At the start of the game, perform the following phase:
- Pre-War Phase
Then, during each round, perform the following phases:
- Engine Phase
- Action Phase
- Political Phase
- Conflict Phase
- End Phase
At the end of the game, perform the following phase:
- Armistice Phase
Example: Hannah is playing as the German Reich, while Liam is playing as the United Kingdom. The two countries are at war with one another. The deployment step of the action phase can usually be resolved simultaneously, but they both wish to deploy ships in the sea region [S04]. Unfortunately for Liam, Hannah has the first player token, and therefore she can deploy her ship in that region first. Liam can no longer deploy his ship in that region, and can only do so elsewhere, if possible.
Sequences and Turn Order
Phases are usually resolved by following a sequence of steps. Each step is usually resolved by all players, but some steps might only be resolved by the first player. Once each step has been resolved, play moves on to the next step, unless otherwise indicated.
Within a phase sequence, individual steps might also be divided into further steps. In this case, resolve them in the same way.
These steps are resolved in turn order, which always starts with the player who has the first player token, then proceeds clockwise with each subsequent player.
Though steps are actually resolved in turn order, it might also be recommended in some cases that a step can be resolved by all players simultaneously instead. This is solely to expedite play and minimise player downtime.
In the rare instance where one player's resolution of a simultaneous step would have a direct impact on that of another, or if players choose to do so, simply revert to observing turn order for that step before continuing with the next step as normal.
Ship callouts (as printed on the page): Ships can only enter sea regions. Friendly infantry and tanks can move into sea regions with a ship. If the ship moves, these units move with it.
Pre-War Phase (First Turn Only)
This phase represents the choices made by each major country in the lead up to the start of World War II in 1939.
Pre-War Phase Sequence
At the start of the game, each player chooses one of the following steps to perform, in turn order:
- Expand a border
- Gain an ally
Once they have done so, all players will then place their starting factories and units on the board, simultaneously.
Example: The United Kingdom decided to expand a border. They could choose to take control of Ireland, the only land region adjacent to one of their land regions that's controlled by a minor country. But France is not being played by another player in this game, and so it is a minor country as well. They decide to take control of land region [L11] of France and place one of their flag tokens on that region instead, as they can ignore the sea region [S05] between their land region [L51] and the French region.
Expand a Border
Choose a land region controlled by a minor country adjacent to a land region you control and take control of it. In this case, you may treat any land regions separated by a single sea region as though they were adjacent.
What are the benefits of expanding a border? Expanding a border allows players to get closer to the action more quickly. Regions controlled by a player can provide them with more resources, as well as offering additional areas to build factories and deploy units.
Gain an Ally
Choose any minor country and ally with them on the political board.
What are the benefits of gaining an ally? Since players can deploy units in regions belonging to an ally as though they were their own, allying with a minor country allows players to have an impact in areas further afield on the game board than they would otherwise.
Example: Being so far away from Western Europe, the Soviet Union decides that an ally near there would be useful to allow them to stop the expansion plans of the German Reich. They decide to ally with the minor country, Switzerland, placing one of their flag tokens in the Switzerland ally space of the political board.
Place Starting Factories and Units
Each player gathers any factories and starting units that they put aside during set up and places them on the game board, simultaneously.
Factories can be constructed in any region the player controls that doesn't already contain a factory.
Infantry, tanks and planes can be deployed in any land region the player controls or that their allies control, provided the number of their units in the region does not exceed the region's width.
Ships can be deployed in any sea region adjacent to a land region the player controls or that their allies control that doesn't contain enemy units.
Any units belonging to your country are considered friendly units.
1. Engine Phase
Engine Phase Sequence
Players perform the following steps, simultaneously:
- Select
- Reveal
Select
Each player chooses an engine card from their hand and places it face down in front of them.
Players begin the game with the same five engine cards, but they can unlock additional engine cards from their focus deck as the game progresses.
Reveal
Once every player has chosen their engine card, all players reveal their chosen engine card and return any engine card they revealed on a previous turn to their hand.
Each engine card has two effects: a top effect and a bottom effect. The top effect provides the player with some resources immediately after the card is revealed. The bottom effect provides a further effect, usually improving one of the actions that the player will take later in the turn.
Anatomy of an Engine Card
- Name
- Country: The major country this engine card belongs to.
- Top Effect: Provides the player with additional resources immediately.
- Bottom Effect: Usually improves one of the player's actions later in the turn.
The engine cards printed in the rulebook are:
- Technological Progress (top effect): Gain 2 production, or, if you have 0 production, gain 4 instead. (Bottom effect): During the research step, add an additional progress token to your in-progress research card.
- National Progress (top effect): Gain 2 manpower, or, if you have 0 manpower, gain 4 instead. (Bottom effect): During the focus step, add an additional progress token to your in-progress focus card.
- Industrial Push (top effect): Gain 2 political power, or, if you have 0 political power, gain 4 instead. (Bottom effect): During the construction step, after constructing your first factory, you may spend 1 manpower to construct a second factory.
Example: It's the second turn of the game and Sarah and Carl have both chosen their engine cards and placed them face down. Each of them reveals their card, then returns their previous card from last round to their hand. Sarah has chosen the National Progress engine card, so she immediately gains 2 manpower. Carl has chosen the Industrial Push engine card. His political power is at 0, so he immediately gains 4 political power, instead of 2. The bottom effect of each card will then apply during the following action phase.
2. Action Phase
Action Phase Sequence
Players perform the following steps, simultaneously:
- Construction
- Research
- Focus
- Production
- Deployment
Construction
Each player may spend 2 manpower to construct a factory in any land region they control that doesn't already contain a factory. Each player may only construct one factory per construction action unless otherwise stated.
When you construct a factory, place a factory token in your chosen region.
Why do I want to build factories? Each factory a player has generates production at the end of each turn. Production is used to produce units.
Industrial Push Engine Card
If a player has played the Industrial Push engine card, they may spend 1 manpower to construct a second factory, ignoring the one factory per construction action restriction.
Example: Nick spends 2 manpower to construct a factory and place it in one of his land regions that doesn't contain a factory. Ordinarily, this would be the only factory Nick could construct. However, he played the Industrial Push card during the engine phase, allowing him to construct a second factory for 1 manpower. He spends the 1 manpower to construct a second factory. Like the first factory, this must be constructed in a land region without a factory.
Research
Players perform the following steps, simultaneously:
- If a player doesn't have an in-progress research card, they choose one from their research cards.
- Each player places one progress token on their in-progress research card.
- Each player may spend manpower to add an equal number of progress tokens to their in-progress research card.
- If a player's in-progress research card has progress tokens equal to or greater than its progress value, it is completed. Remove all progress tokens from the card. The card's effects are now in play.
Technological Progress Engine Card
If a player has played the Technological Progress engine card, they may add two progress tokens to their in-progress research card instead of one.
Anatomy of a Research Card
- Name
- Country Flag: The major country this research card belongs to.
- Card Effect: The effect the card has.
- Progress Value: The number of progress tokens needed to complete the card.
Example: Stuart doesn't have an in-progress research card, so he picks one from his available research cards, choosing Infantry II. He places a progress token on it. He decides he wants to get the card completed this round, so spends 1 manpower to place an additional progress token on the card. The research card has a progress value of 2 and is now completed. He places it over his Infantry starting unit card.
Why do I want to research? Research cards provide ongoing benefits and bonuses to your country once they are completed, such as more powerful units.
Unit Upgrade Research Cards
Some research cards are unit upgrade cards that improve your country's units. A unit upgrade card can be identified by the unit symbol in the top left corner. When a unit upgrade card is completed, place it on top of the starting unit card with the same symbol. From this point onwards, all units of this type use the soft attack, hard attack and production values shown on the new card, as well as any new special rules.
Focus
Players perform the following steps, simultaneously:
- If a player doesn't have an in-progress focus card, they choose one from their focus cards that they meet the requirements for.
- Each player places one progress token on their in-progress focus card.
- Each player may spend political power to add an equal number of progress tokens to their in-progress research card [sic].
- If a player's in-progress focus card has progress tokens equal to or greater than its progress value it is completed. Remove all progress tokens from the card. The card's effects are now in play.
Note: step 3 above is printed as "in-progress research card" in the source, which appears to be a typo for the focus card; it is transcribed as printed.
Why do I want to focus? Focus cards provide your country with many different capabilities, such as offering additional ways to score victory points, allowing you to immediately ally or go to war with other countries, the ability to gain new engine cards, and many other powerful effects.
National Progress Engine Card
If a player has played the National Progress engine card, they may add two progress tokens to their in-progress focus card instead of one.
Anatomy of a Focus Card
- Name
- Focus Card Set: Each focus card belongs to a set: a generic set which is always used, or a set defined by which endgame scoring focus card is in use.
- Country Flag: The major country this focus card belongs to.
- Requirements: Any requirements that must be met before this card can be put in-progress.
- Card Effect: The effect the card has.
- Progress Value: The number of progress tokens needed to complete the card.
Example: Jess already has the New Soviet Woman focus card in-progress from the previous turn, so she doesn't need to choose a new card from her focus deck. She places a progress token on the card, bringing it to two tokens. She's also played the National Progress engine card this turn, placing an additional token on the card. This means it now has three tokens, completing it. She resolves the effects, immediately gaining 1 stability and 5 political power.
Common Focus Card Types
The following printed focus cards illustrate the common types. Each is shown with its requirements and effects as printed.
Trade Agreement with Romania (Mediterranean Bastion, United Kingdom)
- When this focus card is completed, these two countries become allies.
- Requirements: Not at war with Romania.
- Effects: During the generate resources step, while allied with Romania, generate +1 production.
Coerce Turkey (Anschluss, German Reich)
- When this focus card is completed, these two countries become allies. In addition, the minor country changes its ideology to that of the major country.
- Requirements: Not at war with Turkey.
- Effects: Change Turkey's ideology to match your ideology. During the generate resources step, while allied with Turkey, generate +1 political power.
Justify War with Denmark (Baltic Security, Soviet Union)
- When this focus card is completed, these two countries go to war.
- Requirements: N/A.
- Effects: Each time you take control of a region controlled by Denmark, score 1 victory point.
Engine focus card example: Autocratic Imperialist (Consolidate the British Isles, United Kingdom; progress value 3)
- Top effect: Gain 1 stability.
- Bottom effect: During the political phase, you may go to war with a country of your choice, without spending any [spend symbol not legible in the preview scan].
Engine Focus Cards
Some focus cards are additional engine cards that a player can play during the engine phase, identified by having a top and bottom effect. When a player completes an engine focus card, they add it to their hand of engine cards.
General Focus Cards
Generals are a unique type of focus card that allow a player to deploy a general with unique effects during their deployment action. When a general card is completed, place it in play near your unit cards, with the matching general standee.
Example general card (as printed on the page): Kurt Student, General. Effects: Friendly planes in the same region as Kurt Student gain +1 soft attack and +1 hard attack.
Production
Each player may spend production matching the cost listed on their unit card to produce that unit. When a player produces a unit, they take the matching miniature from their supply and place it on the matching unit card.
Players may produce any number of units provided they have enough production and have the required miniatures in their unit supply.
If a player can't take the miniature from their supply, they can't produce that unit.
Anatomy of a Unit Card
- Unit Name
- Unit Type
- Country Flag: The major country the unit belongs to.
- Soft Attack Value: How much soft attack the unit has.
- Hard Attack Value: How much hard attack the unit has.
- Production Cost: How much production must be spent to produce this unit.
- Unit Special Rules: Any additional rules this unit has. A full list of unit special rules can be found on page 35.
The example plane card on the page is a Plane, with soft attack 2, hard attack 0 and production cost 2. Its special rule: Planes can enter any region, but can't start a battle. Each enemy plane in a region stops a resource symbol or factory from generating resources.
Why do I want to produce units? Units are used to battle, allowing you to take control of regions as well as defending your own. Producing units gets them ready to be deployed onto the battlefield.
Ready for War Engine Card
If a player has played the Ready for War engine card, the first unit they produce during the production step costs 0 production.
Deployment
Each player may spend manpower to deploy any units on their unit cards onto the game board. A player may deploy one unit for each manpower spent.
Players may only deploy units they have produced and placed onto their unit cards.
Infantry, tanks and planes can be deployed in any land region the player controls or that their allies control that doesn't contain any enemy units, provided the number of units in the region does not exceed the region's width.
Ships can be deployed in any sea region adjacent to a land region the player controls or that their allies control that doesn't contain any enemy units.
If a player can't deploy the miniature in a valid region, they can't deploy that unit.
Why do I want to deploy units? Deploying units allows you to place them on the game board in friendly and allied regions, ready to defend them, or to move out and take control of regions belonging to other countries.
Into the Fray Engine Card
If a player has played the Into the Fray engine card, the first two units they deploy during the deployment step cost 0 manpower.
Deploying Generals
If a player has completed a general focus card, they may deploy the general in the same way as they would a unit.
Generals can only be deployed into regions that contain friendly units and must be accompanied by at least one friendly unit at all times, if possible. A general doesn't count towards the width of a region. If a general is ever in a region without any friendly units, return it to the general's focus card immediately. The general can now be redeployed, as before.
Deploying in Allied Major Countries
If a player wishes to deploy units in a region controlled by an allied major country, that ally must approve the deployment of each unit in that region.
3. Political Phase
The political phase allows players to manipulate their standing with other countries on the political board.
Political Phase Sequence
Players take turns choosing one of the following steps to perform, in turn order:
- Raise tension
- Improve relations
- Pass
Once each player has passed, the political phase ends.
Raise Tension
Spend political power to increase aggression towards a chosen country by an equal amount.
Improve Relations
Spend political power to decrease aggression towards a chosen country by an equal amount.
Pass
Skip this player for the remainder of the phase.
4. Conflict Phase
Conflict Phase Sequence
Players take turns performing the following steps, in turn order:
- Place command tokens
- Move units
- Increase aggression
- Resolve battles
Place Command Tokens
Command tokens are used by players to move friendly units between regions on the game board.
Players take turns placing command tokens by secretly choosing one of the tokens they have available and place it face down in a region they control or in a region that contains friendly units.
There are three types of command token:
- Double Move (x1): When revealed, move any number of friendly units in this region up to two regions. At least one unit must be moved two or more regions, if possible.
- Single Move (x2): When revealed, move any number of friendly units in this region up to one region. At least one unit must be moved one or more regions, if possible.
- Bluff (x1): When revealed, this token has no effect, but can be used to deceive other players.
Players begin the game with four command tokens, but they can unlock an additional single move token by completing a research card as the game progresses.
If a player does not wish or is unable to place a command token, they pass. Skip this player for the remainder of the step. Once each player has passed, the step ends.
Move Units
Players take turns revealing one of their command tokens and resolving its effect. Once a token is resolved, return it to their supply. If the player runs out of command tokens to resolve, skip this player for the remainder of the step.
When moving a unit one region, place it from its current region into an adjacent region. When moving a unit more than one region, repeat as necessary.
Normally, infantry and tanks can only move into land regions, but can move into sea regions that contain a friendly ship. Ships can only move into sea regions. Planes can move into any type of region.
Units can enter a region controlled by any country, but if a unit enters a region controlled by an enemy country or containing enemy units, they must stop moving, even if they have movement remaining.
Conversely, a unit that begins a move in a region controlled by an enemy country or containing enemy units can only move them to adjacent regions that they or their allies control.
Units can't end their movement in a region where the number of friendly units in the region exceeds the width of the region.
If there are no valid regions for the unit to move to, it can't move.
Example: Abby reveals the double move command token. She must move at least one unit up to two regions. She moves one of the tanks two regions, then moves the remaining units one region, into an adjacent region. Her general cannot be left behind, so she chooses to send him into the adjacent region with the remaining units as well.
Increase Aggression
Once all unit movements are complete, players reassess their standing with each neutral country on the political board, simultaneously.
If a player has friendly units in a region controlled by a neutral country, increase aggression towards that country by 1 for each region of that country they have friendly units in. Then, for each of those regions that contains neutral units, increase aggression by an additional 1 as well.
Resolve Battles
Players take turns choosing to resolve one of the battles in which they are at war with another country in the region, in turn order. If a player runs out of battles to resolve, skip this player for the remainder of the step.
Battle Sequence
In Hearts of Iron: The Board Game, there are two ways in which a battle might occur between countries.
If two or more countries that are at war with each other have units in the same region, a unit battle occurs.
If one country has units in a land region, it contains no enemy units, and they are at war with the country controlling the region, a region battle occurs.
It is possible for both of these conditions to be fulfilled in the same region at the same time, and it is also possible for one to be fulfilled without the other, but each region will only have a maximum of one unit battle and one region battle per round.
In each region, battles are resolved in the following sequence:
- Resolve unit battle
- Resolve region battle
Region battles can't be resolved in sea regions and supply line regions, though unit battles can still occur in these regions.
Unit Battle
A unit battle occurs where two or more countries that are at war with each other have units in the same region. These countries will battle it out with their units simultaneously, on as many fronts as necessary.
Combatants add together all of the soft attack values of their units in the region. Each of them may also support their units by adding the soft attack value of a single friendly unit in each adjacent region they control.
Each combatant compares soft attack values. The combatant with the highest value upgrades the die they would roll from red to yellow.
Combatants then do the same for their hard attack values, adding together all of the hard attack values of their units in the region, as well as the hard attack value of the same friendly units supporting from adjacent regions.
Each combatant compares hard attack values. The combatant with the highest value upgrades the die they will roll. If they also had the highest soft attack value, they upgrade their die again, from yellow to green. Otherwise, they upgrade their die from red to yellow as well.
Combatants only upgrade their die if they have the highest soft attack or hard attack values. If there is a tie for the highest value, no one upgrades their die.
Unit Battle Sequence
- Determine combatants
- Determine damage dice
- Roll dice
- Assign damage
- Resolve damage
Determine Combatants
Any units belonging to countries that are at war with each other in a region where a unit battle occurs are automatically included as combatants.
If a country is allied to one of the combatants, they are included in the battle as a combatant as well, fighting on the same front as their ally against the enemy combatant.
If they are allied with two or more countries fighting on different fronts, they must choose which front to remain allied with, resulting in them automatically going to war with any of the combatants on any front they did not choose.
Determine Damage Dice
Unit battles are resolved by rolling dice to determine the amount of damage dealt. Each combatant normally rolls a single red die, but this can be upgraded by having the highest soft attack and hard attack values.
Assign Damage
Each combatant rolls their die and the number of pips rolled determines the amount of damage they have to assign.
If there are only two combatants involved in the battle, the damage rolled is automatically assigned to the opposing combatant.
If more than two combatants are involved in the battle, each player must decide, in turn order, how they wish to divide the amount of damage they rolled between the combatants on other fronts.
Example: James in a unit battle against both Lisa and Dave, who have banded together to form an allied front. Luckily for James, he has both the highest soft attack and hard attack values, so he gets to upgrade his die twice to green, while they will both roll on red. Lisa rolls a 1 and Dave rolls a 0, meaning 1 damage is automatically assigned to James. James rolls a 3. He can split the resulting damage between the allies as he sees fit, choosing to assign 1 damage to Lisa and 2 damage to Dave.
Resolve Damage
For each pip of damage assigned to a combatant, they must remove one friendly unit of their choice from that region and return it to their supply. Supporting units from adjacent regions can't be removed.
When removing units from the game board, always return them to your unit supply. Don't return them to your unit cards!
If only one front has units remaining in the region, they win the battle.
If the region is a land region and one of them is at war with the country controlling the region, that combatant must immediately battle the land region using their remaining units. If more than one of them is at war with the country controlling the region, they must decide amongst themselves who will attempt to take control of the region.
If there are units belonging to one or more combatants on different fronts remaining in the region, there is no winner, and the battle is resolved for this turn. The battle will continue during the conflict phase of the next round, assuming any of the countries involved keep units in the region and remain at war with each other.
Example: The German Reich and the Soviet Union are at war! They start the unit battle by totalling up the soft attack of each unit they have in the region. At this point, the German Reich has a soft attack of 3 and the Soviet Union also has a soft attack of 3 as well. The Soviet Union controls an adjacent region containing a plane. They have it support their units in battle, increasing their soft attack to 4. The German Reich can't have their adjacent plane support their units because they don't control the region it's in. The Soviet Union has the higher soft attack so will roll the yellow die. Now, they total their hard attack values. The German Reich has a hard attack of 5 and the Soviet Union has a hard attack of 1. The Soviet Union's adjacent plane increases their hard attack to 3, but the German Reich still has the higher hard attack, so will roll a yellow die as well. The German Reich rolls a 2 and the Soviet Union rolls a 3. The Soviet Union must remove two units of their choice from the region, choosing to remove one infantry and one tank. Unfortunately for the German Reich, the Soviet Union's mighty roll destroys all of their units in the region. The Soviet Union has won the battle and defended their region!
Region Battle
A region battle occurs where one country has units in a land region, it contains no enemy units, and they are at war with the country controlling the region. This battle will only play out between the invading country's units and the defending region itself.
If two or more neutral countries that are each at war with the country controlling the region have units there, none of them can attempt to take control of the region.
If two or more allied countries have units in the region, they must decide amongst themselves who will attempt to take control of the region.
Region Battle Sequence
- Determine damage dice
- Roll dice
- Resolve damage
Determine Damage Dice
Region battles are resolved by rolling dice to determine the amount of damage dealt. Each combatant normally rolls a single red die, but this can be upgraded by having the highest soft attack and hard attack values.
The invading combatant adds together all of the soft attack values of their units in the region. They may also support their units by adding the soft attack value of a single friendly unit in each adjacent region they control.
They compare this value with the soft attack value shown on the defending combatant's region, including any bonuses applied by tokens or any other card effects. The defending combatant can't support their region with adjacent units. The combatant with the highest value upgrades the die they would roll from red to yellow.
The invading combatant then does the same for their hard attack values, adding together all of the hard attack values of their units in the region, as well as the hard attack value of the same friendly units supporting from adjacent regions.
They compare this value with the hard attack values shown on the defending combatant's region, including any bonuses. The combatant with the highest value upgrades the die they will roll. If they also had the highest soft attack value, they upgrade their die again, from yellow to green. Otherwise, they upgrade their die from red to yellow as well.
Combatants only upgrade their die if they have the highest soft attack or hard attack values. If there is a tie for the highest value, no one upgrades their die.
Resolve Damage
Each combatant rolls their die. If the defending combatant is a minor country, any player at the table can roll the dice on their behalf.
For the defending combatant, the number of pips rolled determines the amount of damage they have to assign. For the invading combatant, it determines whether or not they take control of the region.
For each pip of damage assigned to the invading combatant, they must remove one friendly unit of their choice from that region and return it to their supply. Supporting units from adjacent regions can't be removed.
When removing units from the game board, always return them to your unit supply. Don't return them to your unit cards!
No damage is dealt to the defending combatant, but if the invading combatant has at least one friendly infantry remaining and the damage they rolled was 1 more than the total number of political power, production, and manpower resource symbols for the region, they take control of the region.
Otherwise, the invading combatant has failed to take control of the region and the battle is resolved for this turn. The battle will continue during the conflict phase of the next round, assuming the invading combatant keeps units in the same region, both countries remain at war with each other, and no enemy units enter the region.
Example: The United Kingdom is at war with France and attacking one of the regions they control. The United Kingdom's upgraded infantry is supported by infantry and two tanks from three different adjacent regions, giving them higher soft attack and hard attack than France's units. The United Kingdom rolls a 3 on the green die and France rolls a 1 on the red die. The French region has two resource symbols (the victory point symbol assigned to a capital is not a resource symbol), so the 3 damage is exactly what the United Kingdom needs to win the battle and take control of the region, however France's roll destroys the United Kingdom's only unit in the region. Despite rolling enough to take control of the region, the United Kingdom has no infantry remaining in the region and is unable to take control away from France.
Viva La Resistance!
5. End Phase
End Phase Sequence
Players perform the following steps:
- Draw event card
- Generate resources
- Check stability
- Score victory points
- Advance the round tracker
- Pass the first player token
Draw Event Card
Only the first player draws and resolves an event card for the table.
When resolving an event card, resolve its main effect first. If the main effect refers to a country that doesn't control any regions, discard the event card and draw another.
After resolving the main effect, if the country flag shown above the minor country effect is a minor country for this game, resolve the minor country effect. Otherwise, ignore the minor country effect.
Anatomy of an Event Card
- Main Effect Name
- Narrative Text: Provides thematic background for the card.
- Main Effect: This effect is always resolved.
- Minor Country Effect Name
- Minor Country Flag
- Minor Country Effect: This effect only resolves if the country with the flag shown is a minor country.
The event card illustrated on the page is "Netherlands Seeks Alliance". Narrative: Concerned by the ongoing war, the Netherlands seeks allies to help defend its lands. Main effect: Starting with the first player, each player may choose to ally with the Netherlands. If the player's ideology does not match the Netherlands, this costs 1 political power. Minor country effect name: "Extension of the Maginot Line". Minor country effect: Place a +1 soft attack token and a +1 hard attack token in every region of France [L10-12].
Generate Resources
Players perform the following steps, simultaneously:
- Count up each of your factories and gain that amount of production.
- Count up each political power symbol and manpower symbol on the regions you control and gain that amount of each of those resources.
- Generate any additional resources provided by any resource generating effects on any cards you currently have in play.
Check Stability
Players perform the following steps, simultaneously:
- Modify your production and manpower resources by the amounts shown beneath your current stability level.
- Maintain stability by paying the political power amount shown in brackets on the current stability level. If you cannot maintain stability, reduce your stability by 1.
- If you paid to maintain stability, you may then pay the political power amount shown in the brackets on the next stability level to increase your stability by 1.
The stability track on the player board (page 16) shows the following values, read from the printed track. The level number is followed in brackets by the political power cost to maintain that level, where one is shown:
| Stability level | Political power cost to maintain | Production modifier | Manpower modifier |
|---|---|---|---|
| 0 | none shown | -2 | -1 |
| 1 | 1 | -1 | -1 |
| 2 | 1 | -1 | none |
| 3 | 1 | none | none |
| 4 | 2 | +1 | none |
| 5 | 2 | +1 | +1 |
| 6 | 3 |
The table above was transcribed from the player-board graphic on page 16 of the preview, because the stability values are shown as graphics rather than text. "None" means no modifier is shown for that level.
Gain Victory Points
Players perform the following steps, simultaneously:
- Gain 1 victory point for each capital region you control other than your starting capital region.
- Gain any victory points provided by additional scoring effects on your combined country and ideology board.
- Gain any victory points provided by end of turn scoring effects on any cards you currently have in play.
Advance Round Tracker
The first player moves the turn token to the right and into the next slot of the round tracker.
If the round tracker is in the 1945 slot and cannot be moved to the right, the war is over and the game has ended. Skip passing the first player token and progress to the armistice phase.
Pass the First Player Token
The first player passes the first player token to the player on their left.
A new round begins and play continues with the next engine phase.
Armistice Phase (Last Turn Only)
Each player gains any victory points provided by the endgame scoring effect of their focus card set.
Once all players have resolved their endgame scoring effect, the player with the most victory points is the winner.
If there is a tie, the tied player with the most total stability, political power, production, and manpower is the winner.
If there is still a tie, the tied players share the victory!
Unit Special Rules
Most units in the game have special rules that give them unique abilities.
Infantry
- Infantry can only enter land regions.
- To conquer a region, at least one friendly infantry must remain after the battle has ended.
Tanks
- Tanks can only enter land regions.
Ships
- Ships can only enter sea regions.
- Friendly infantry and tanks can move into sea regions that contain a friendly ship. If the last friendly ship moves from the region, friendly infantry or tanks in the region must move with it.
Planes
- Planes can enter any region.
- Planes can't participate in region battles that don't contain other friendly units.
- Planes in a region controlled by a major country they are at war with may prevent one factory or resource symbol in that region from generating resources.