RulesPal
Chat
Rulebook
Glory Days College Football thumbnail

Glory Days College Football

Glory Days College Football Rulebook

Table of Contents

Table of Contents

  • Contents
  • Team Ratings and Result Charts
  • Game Set Up
  • Team card
  • Team Card Key
  • Team Chart Glossary
  • Game Basics
    • Modes of Play
    • Timing
  • Game Play Sequence – Hybrid Mode
    • Kickoff
    • Simulated portion of the drive
    • Play by play portion of the drive
    • Other results in play by play mode
    • Optional Rule – Measurements
  • Play by Play Mode
  • Quick Play Mode
  • Event Chart, Trick plays and Hail Mary's
  • Using the Excel Helper
    • Play by play mode Tab 1
    • Simulated drive helper Tab 2
    • Stat helper Tab 3

Contents

Your game should include the following:

  • 5 Dice: two D6 (Red and white), two D10 (Black and White) and one D20 (Print version only) and 3 pawns
  • 30 All-time great College teams (Additional season sets will be released in the future)
  • Master game charts including all needed tables, field position marker and drive charts
  • Event and Trick Play chart
  • Sample Score sheet (Additional score sheets can be downloaded for free and the excel helper will be emailed)

Team Ratings and Result Charts

Teams in Glory Days College Football are individually rated in the following categories:

  1. Offensive and Defensive Drive ratings: Indicated by a number between 1 and 20, higher is better. These ratings are used in the hybrid and quick play game modes and determine the success of the simulated portion of the drive (hybrid) or 1st portion of the drive in quick play mode.
  2. QP Off/Def drive 2 ratings: Used only in quick play mode for the second portion of the simulated drive based on the teams ability to finish a drive in plus territory.
  3. Run Offense and Defense ratings: These ratings are used in the play by play portion of hybrid mode and full play by play mode. They determine the chance of a successful run play in play by play mode.
  4. Pass Offense and Defense ratings: These ratings are used in the play by play portion of hybrid mode and full play by play mode. They determine the chance of a successful pass play in play by play mode.
  5. *Penalties: Determines the chance of a penalty in hybrid play by play and full play by play mode when doubles are rolled on the 2D6 trench control roll. (Or if using the optional penalty rule in quick play mode)
  6. Goaline rating: Determines the teams ability to punch in a drive that stalls inside the 10 yard line in quick play mode. Number on the left is offensive rating, number on the right is the defensive adjustment rating.
  7. Play calling matrix: Based on team tendencies in certain down and distance situations. Determined by a D10 roll in Play by play mode and the play by play portion of hybrid mode.
  8. Quick Play TD assignment: Used only in quick play mode to determine how the TD was scored (run or pass) and who scored it (D20 rolled on the catch chart explained later)
  9. Running play matrix: Used to find the result of a running play in play by play mode, (and play by play portion of hybrid mode) by cross referencing a D10 roll against the column determined by the trench control result.

The game basics and play options portion of this manual, which follow the team card overview on the next page, will walk you through how to play the game in each of the three available modes.

Game Set Up

You will start by selecting two teams to face off and designating one as the home team and one as the visitor. The team name, offensive and defensive ratings, penalty ratings and play call matrix are located on the top of the card. Depending on the game mode being played, these ratings are documented on the printed, or Excel score sheet. The three pawns for field position and down and distance are placed on the main game board. Timing is tracked on the score sheet by total possessions. A chart which gives ranges for simulated drives (if playing hybrid or quick play) and trench control in play by play mode is also included. The rows to use on these charts are the difference between offensive and defensive ratings, and also entered on the score sheet. Determine which of the D10 you will use for multiples of 10 and which on for multiples of 1. (Recommend using black for X10 and white for X1)

Team card

The printed manual shows an example team card (Oregon and Arizona) on the page following this heading; the card graphic itself is not reproduced here. The numbered key for the card follows.

Team Card Key

  1. Drive ratings: Indicated by numerical values, higher is better. This determines the chances of a successful drive, by subtracting the opposing team's defensive rating from the offensive rating of the team with the ball. Drive Offense and Drive Defense are used for the initial portion of the drive in hybrid mode and the first drive check in quick play mode. QP Off Drive 2 and QP Def Drive 2 are only used for the second drive check in quick play mode.
  2. Team offensive play call matrix: Represents the percentage of plays a team runs the ball (used in hybrid and quick play modes), drives per game and play calling tendencies for down and distance situations in play by play mode, with the play call determined by a 1D10 roll.
  3. Run and pass offensive and defensive ratings: Used for trench control in play by play mode, with the defensive rating subtracted from the offensive rating of the team with the ball in play by play mode.
  4. Highlighted in yellow, a team's penalty rating is checked whenever doubles are rolled on 2D6. On the right in red lettering, the team's offensive and defensive Goaline rating, used only in Quick Play mode to determine if a drive stalled inside the 10 yard line is finished. (Explained later)
  5. Play by play run results based on the level of 'trench control' by the offense or defense, used only in hybrid and play by play mode, as well as team specific big play results and color coded results for potential turnovers – Explained in detail later.
  6. Play by play short pass results based on the level of 'trench control' by the offense or defense, used only in hybrid and play by play mode, as well as team specific big play results and color coded results for potential turnovers/sacks – Explained in detail later.
  7. Play by play long pass results based on the level of 'trench control' by the offense or defense, used only in hybrid and play by play mode, as well as team specific big play results and color coded results for potential turnovers/sacks – Explained in detail later.
  8. Turnover and sack ratings: Color coded to match the potential results on the play by play charts. (Drive charts also have potential turnovers) The team rating is adjusted by the opponents Def+ value against a 1D20 roll. QB Comp% is only used in hybrid and quick play modes, with a 1D6 roll determining the completion percentage for that game.

Team Chart Glossary

  • Special Teams: Contains extra point (XP) and field goal ratings, Kickoff, kickoff return, punt, punt return, block and onside ratings
  • Fum Ret: Team specific fumble return results, used when Team Fum result is rolled on the main return chart
  • Int Ret: Team specific interception return results, used when Team Int result is rolled on the main return chart
  • KOR: Team kickoff specific return results, used when Team result is rolled on the main return chart
  • PR: Team kickoff specific return results, used when Team result is rolled on the main return chart
  • Stuff: Team specific negative yardage result, used when Stuff is rolled on the opponents Def + or Def ++ columns

Game Basics

Modes of Play

Glory Days College Football offers the user flexibility in how they want to play the game, offering three different options that vary in length and detail, though complete individual stats can be obtained from all three modes. The base game mode is a hybrid system, in which the first half of the drive is resolved in quick play fashion, and if successful in creating a potential scoring opportunity, the game then moves to play by play mode to finish the drive. If desired the game can also be played in full play by play mode, or quick play mode as well. After the timing section we will breakdown all three methods of play.

Timing

In all three modes the games are timed by total possessions, based on the number in parenthesis next to the run percentage in the play calling matrix. These numbers are added for both teams, divided by 2 and rounded down. The result is the number of drives each team gets in a game. Looking at the Oregon and Arizona cards on the previous page, each team will get 11 drives per game. (11+11 = 22 / 2 = 11) if one team averages 10 drives per game, the final result would have been 10.5, rounded down to 10 drives each per game. Using these same two teams, drives are allotted as follows.

The team receiving the opening kickoff gets 3 drives in the first quarter and 3 drives in the second quarter. The other team gets 2 drives in the first quarter and 3 in the second quarter. In the second half the team receiving the second half kickoff would get 6 drives (3/3) and the other team would get 5 (2/3).

Optional rule – Close game late: If the game ends with the team possessing the ball on the final drive ahead by 8 or less points after being stopped or scoring, the trailing team gets one last attempt to tie or win. After receiving the ensuing kickoff/punt, roll a single D6 and add 2 to the result. That team will then have that many plays to score to tie or win. Regardless of the mode you are playing, this final drive will be played in play by play mode and all offensive roll will be taken from the 2 minute column of the team play call matrix. If team possessing the ball is past their own 40 yard line on their last play, they may try a Hail Mary (found on the drive chart) rolling a D20 and referencing the result in the appropriate row. Conversely if the team that has the ball last, scores to cut the lead to 8 or less, they may try an onside kick (found on the team charts) and if they recover (0-18 on a 2D10 roll) they will follow the same process as above to determine how many plays they have left, using only a single D6, with no modifier.

Game Play Sequence – Hybrid Mode

Hybrid mode is the base game model for Glory Days College Football and is a cross between quick play games and full play by play games. The game is started by rolling a D10 for both the home and away teams, with the higher number receiving the opening kickoff (home team gets ball first on a tie) or you can give the higher number the choice to receive or defer.

Kickoff

Roll all 5 dice, checking the 2D6 for doubles for a possible penalty. If the 2D6 result is doubles, reference the D20 against the offensive penalty range for the receiving team and defensive penalty range for the kicking team. If the result is in range, you will roll the D20 again, check the appropriate mini-chart on the main game chart, apply the penalty the result to the end of the play, or re kick. If no penalty ignore the D6 and D20 rolls and reference the appropriate kickoff/return results on the main game board based on the teams rating in that phase of the game.

Examples: (The Arizona and Oregon cards on the preceding page will be used for all examples in these instructions)

Oregon wins the kickoff roll and will receive. Arizona kicks and rolls a 4 and a 6 on the D6, a 5 on the black D10, 4 on the white D10 and 17 on the D20. Since the D6 are not doubles, there is no penalty and the D6 and D20 rolls are ignored. Arizona is rated an A on kickoffs, Oregon a B on KO returns. Checking the black D10 roll of 5 under column A on the Kickoff Chart (main game board) the result is TB, meaning touchback, Oregon starts on their own 25 yard line.

Had the black D10 been an 8, the ball would have been fielded at the goal line, now checking the white D10 of 4 under column B of the KO ret chart, the result is a 36 yard return, Oregon starts on their own 36. Anytime a team BP comes up on a return result, re-roll the white D10 and check the KOR column on the team charts for a team specific return result. This allows potential big plays to occur, or even a potential fumble if this result is color coded in red.

Simulated portion of the drive

Once the starting point of the drive is determined, place a pawn at the appropriate spot on the game board, and the other 2 on the 1st and 10 spots on the down and distance line beneath the field. If keeping individual stats for the simulated portion of the drive, you can use the excel spreadsheet, or track them manually. Both methods will be explained in the statistics section of the manual.

Complete the simulated portion of the drive by rolling all five dice, then referencing the 2D10 read as a number between 0-99 on the appropriate row of the drive sheet, which is the difference between the Drive Offense rating of the team in possession and the Drive Defense of the opposing team. Using Oregon and Arizona, subtract the Arizona drive Defense rating of 5 from the Oregon Drive Offense rating of 10, yielding a final result of 5. Find the result of the 2D10 roll this row on the simulated drive chart shown below.

Assuming Oregon takes possession on their own 25 and the 2D10 roll is 43, which falls between 23-75 and indicates a potential scoring drive referencing the chart. Next reference the 1D20 roll, which is 16 and check the 21-35 column (where the drive started) on the yardage chart to get the number of plays and yards. A roll of 16 indicates a drive of 5 plays for 36 yards, putting the ball at the Arizona 39. We now jump to play by play mode to complete the drive, adding the 2D6 together to get down and distance (explained later) as we finish the drive.

[Drive chart graphic from page 6 of the printed manual, the simulated drive chart, is not reproduced here; it is a separate printed chart.]

If the result from the drive chart is Punt, the plays and yardage will always come from the punt column, regardless of field position, and the offense will then kick (punt or field goal if within range) from the spot the drive is stopped at.

  • When attempting a field goal, add 17 yards to the spot the ball is at and reference the appropriate yardage range on the team chart. Teams may attempt a field goal above the max range listed on the team chart, however for every yard over the max reduce the odds of success by 10. Example: Oregon has a max FG range of 49. If attempting a 55 yarder, the chance of success would be 0-10 (0-70 result in the 40-49 column minus 60 for 6 yards over the max and applied to the farthest distance they were successful from. In this case 40-49.)
  • When punting, utilize the charts on the game board using the team's ratings in Punt and PR, the same way kickoffs are handled.
  • If a potential turnover occurs on the drive chart, use either the Fum Yards, or Int Yards on the drive chart for ball advancement and then resolve the turnover, using the teams turnover rating for fumble or interception, adjusted by the Def + rating of the team on defense. Example: Arizona rolls a potential interception on the drive chart. The D20 roll for that drive is 10, which is a 4-22 (K) result. Advance the ball marker 22 yards, then roll the D20 again. Arizona has an interception rating of 1-16, while Oregon's Def+ for interceptions is +3, meaning the ball is picked on a result of 1-19. If the interception does not occur, the (K) result means Arizona must kick from the spot the drive ended (Punt or Field Goal). If there is no (K) after the yardage result, and no turnover occurs, you would then enter play by play mode from that point on the field.
  • If the result on the drive chart is Run BP 2 or Pass BP 2, you would reroll a D10 and reference either Run BP 2 or Pass BP 2 on the team chart, using the D20 to identify the ball carrier/receiver. Example: Oregon rolls a 78 in the 5 row on the drive chart, Run BP 2 is the result and the D20 is 12, meaning Brown breaks a big run!! Re-roll a D10 and look at Run BP 2 on the Oregon Run chart, the D10 roll is 3, TD, Brown takes it to the house!!. Note: Big plays on the drive chart are carved out like this so a single player is given credit when entering stats on the Excel sheet for simulated drives.

Play by play portion of the drive

As we enter play by play mode, we determined above that Oregon had a 5-36 yard simulated portion of the drive, putting the ball on the Arizona 39. We reference the 2D6 roll from the simulated portion of the drive, which totals 7, referenced on column Def 5-6 (remember Arizona's Drive Defense rating is 5) this gives Oregon a 1st and 10 at that spot. We are now ready to go to play by play mode to see if Oregon can score.

[Situation chart "Use the 2D6 on the charts below to determine situation on a potential scoring drive in hybrid mode" from page 7 of the printed manual is not reproduced here; it is part of the printed master charts.]

Roll all 5 dice again, reading the 2D6 as a number between 11 and 66 (Red die multiples of 10, white die multiples of 1), the black D10 is used to determine the play call from the appropriate down and distance column of the team play calling matrix. The white D10 is used to get the result of the play from the appropriate run/pass chart and the D20 indicates the ball carrier/receiver.

The trench control ratings for play by play mode are:

  • Oregon Run Offense 9
  • Oregon Pass Offense 7
  • Arizona Run Defense 4
  • Arizona Pass Defense 3

Subtracting the defense from the offense gives Oregon a positive result of 5 on run plays and 4 on pass plays, which are the rows we will reference on the line control chart to see who wins in the trenches.

The roll is 21 on the D6, 2 on the black D10, 6 on the white D10 and 4 on the D20. First off, since doubles were not rolled on the D6, there will be no chance of a penalty. The black D10 roll of 2 shows that a running play has been called, per the 1st down column on the Oregon play call matrix. Looking at trench (line) control on row 5 we see that 21 is under the Off ** column, meaning Oregon completely dominated the line of scrimmage and this should be a good play result. Under the ** column on Oregon's run matrix, the white D10 roll of 6 gives us a result 5 yards, the ball carrier (4 on the D20) is Dye. Now it is 2nd and 5, advance the ball marker to the Arizona 34 and switch the down and distance pawns to 2nd and 5.

For our next play the black D10 is a 9, which is long pass on the 2nd down play call matrix for Oregon. The 2D6 roll is 62, not good for the offense, the white D10 is 5 and the D20 is 14 (pass intended for Franklin). Checking 62 on row 4 of the trench control chart, we see the result is Def + meaning the result will come off of Arizona's card under L Pass. Checking the white D10 roll of 5 on the Def + column on Arizona's L Pass matrix we see the result is Inc, pass is incomplete. It's 3rd down and 5.

We roll again black D10 6, 2D6 15, white D10 is a 9 and the D20 roll is 1, it will be a short pass intended for Williams. The roll of 15 on the trench control chart row 4, shows a result of Off **, another great play for the offense. The white D10 roll of 9 under S Pass ** column shows BP1, another big play completed to Williams! Re-roll a D10 and the result of 4 on the BPP 1 column on the short pass matrix is 36, Williams catches a short pass, breaks a tackle and he is gone, touchdown Oregon!!! The field goal team comes out, the roll is a 41, extra point is good (0-97 for success) and Oregon leads it 7-0!

Other results in play by play mode

You will see that some results on the matrixes are color coded.

  • Red possible fumble – Resolve the same way as we did in the example for the simulated drive, adjusting the offensive Fumble rating by the number under Def + on the defenses card. (In this case fumbles by Oregon would be lost on a D20 roll of 1. Oregon's rating is 1-7, Arizona has an adjustment of -7, however, no turnover range can ever be reduced below 1, or raised above 19. There always has to be a chance to lose, or keep possession of the ball.)

  • Purple possible interception – Resolve the same way as the fumble above, using the adjusted interception range on the offenses card. If an interception occurs it happens at the point indicated by the yardage result, if no interception the offense retains the ball and gets the yardage result

  • Blue – Potential sack, resolved the same way as turnovers, adding/subtracting the defensive adjustment from the offense sack range. If no sack occurs the play result in the box (incomplete or yardage gained) stands. If a sack occurs, roll the 2D6 and the result is that many yards lost.

  • Turnover returns – If an interception or fumble occurs, re-roll both D10, using the black D10 to check the appropriate chart on the main game board, applying the result. If the result on this chart is Team Fum, or Team Int, use the white D10 and refer to the appropriate team chart.

  • Penalties – Whenever doubles are rolled on the 2D6 trench control, resolve the play as normal, then re-roll the D20 and check the penalty ranges. (1-# on the offensive team card and #-20 on the defensive team card) If a penalty occurs the offended team can choose to accept or decline. For solitaire play it is expected that the player would take into account the game situation and accept/decline the penalty accordingly.

  • Stalemate Column (-) adjustments – Any results occurring in the stalemate column, designated by the – symbol on the team play matrix is adjusted by the number in the ball carriers Yd Adj column to account for players that performed above, or below team averages. Example: Running back Dye for Oregon has a +1 in his Yd Adj column, meaning that any result taken from the – column on the running matrix will have 1 yard added to it. Conversely Arizona receiver Anderson has a -5 as his yardage adjustment, meaning any catches for this player from the – column will be reduced by 5 yards.

Optional Rule – Measurements

Anytime a play results in the exact number of yards needed to gain a first down on 3rd or 4th down, you may employ a measurement. Roll a D20 and compare the result to the Drive Defense rating of the team on defense. If the result is equal to or less than this number the offense is stopped 1 yard short of the line to gain. If the number exceeds the Drive Defense rating it is a first down. Example: On 3rd and 4 Arizona gains 4 yards, it's going to be close. The D20 is re-rolled and the number is 6, which is less than Oregon's Drive Defense rating, it is now 4th and 1. Arizona goes for it and the yardage result is 1, another measurement. This time the D20 is 12, Arizona converts and gets a fresh set of downs.

  • Optional rule – Close game late: See description of this rule under the timing section. If using this option, the last drive is always done in full play by play mode.

Play by Play Mode

Glory Days College Football can also be played in full play by play mode, for those desiring the full football experience and who can devote up to 90 minutes to a full play by play game. Simply follow the play by play instructions in the hybrid section above for the entirety of all drives. This will give you the most detailed individual player stats, while providing game to game variety in touches.

Quick Play Mode

Quick play mode incorporates simulated drives split into two halves, resolving drives in a fraction of the time it takes in full play by play mode. This mode is useful for simulating the games of other teams in your conference, if doing a conference replay, or if you simply don't want to spend more than 30-35 minutes playing a single game. There is an option through the Excel helper to assign individual stats in this game mode; though you will not get the game to game variance of other modes, it still gives a good accounting of statistics. (Instructions for this will be explained under the Excel helper section below.)

Quick play mode is played using a two part simulated drive format, one that represents the ability to sustain a drive into the opponent's territory and one that reflects the ability to finish the drive, once you are in plus territory. All drives that start in the offense's own territory are simulated using the Drive Offense vs Drive Defense as documented in Hybrid mode.

[Quick play team card comparison (2021 Oregon and 2021 Arizona) from page 9 of the printed manual is not reproduced here.]

If the initial portion of the drive is successful (not resulting in a stop or turnover) the second portion of the drive is completed using the ratings indicated in QP Off Drive 2 and QP Def Drive 2. Using Oregon and Arizona still, we see that if Oregon has a successful first half of their drive, their ability to finish the drive under QP Off Drive 2 is 16. Arizona's ability to stymie a drive in their territory as indicated next to QP Def drive 2 is 7, making a difference of 9, meaning that is the row you refer to on the simulated drive chart for the second portion of the drive.

In addition each team is rated for Goaline Offense with a Goaline Defensive adjustment, in this case 13 for Oregon and a +3 adjustment for Arizona, meaning Oregon's final Goaline offensive rating is 16. This rating comes into play for any drive that stalls inside the 10 yard line of the defense, and was incorporated to balance field goals vs touchdowns. If a drive stalls inside the 10, roll the D20. If the number is equal to or less than the adjusted Goaline rating of the team with the ball, it is a touchdown. Add 1 play and the number of yards remaining to the goal line to the drive and record a touchdown. If the number is more than the adjusted rating, the drive has stalled at that spot (do not add a play) and the offense must kick a field goal.

Optional Rule – 4th quarter: If a team is trailing by two touchdowns or less in the 4th quarter and fails on a drive roll, they may instead run a single play using the regular play by play method in lieu of kicking. If they do not gain the necessary yards needed for a touchdown, it is a 4th down stop and the defense takes over. (If the yardage gained gets the offense the exact yards to the goal line, you may also use the optional measurement rule for increased excitement.)

Optional Rule - Turnover adjustment: to compensate for the reduced turnover chances in quick play mode, if a turnover chance occurs on either portion of the simulated drive, add 3 to the team's turnover rating. (No change to the defensive adjustment, which is applied normally) So if using this rule Oregon's fumble and interception ratings would be 10 and 11 respectively and Arizona's would be 9 and 19 respectively. Remember no turnover rating can be reduced below 1, or raised above 19.

Quick play examples: Arizona wins the kickoff roll and receives the opening kickoff, starting their first drive from their own 25. Rolling on the drive chart under the -2 row (Drive Offense of 5 vs Oregon's Drive Defense of 7) they roll a 34 and will have to punt. Checking the D20 roll of 8 they go 11 yards in 4 plays and will punt from their own 36.

The punt is resolved using the appropriate special teams ratings for punt and punt return, and Oregon takes over at their own 28. Oregon rolls a 41 on row 5 of the drive chart, a successful drive that gains 43 yards on 5 plays on a D20 roll of 14 in the 21-35 column. Oregon now has the ball at the Arizona 29 yards line and rolls for the second portion of the drive on the 9 row of the drive chart. (Oregon QP Off Drive 2 rating of 16 is 9 higher than the Arizona QP Def Drive 2 rating of 7) The roll is 96, possible interception!! The D20 roll under the Int Yards column is 2, which indicates 3 plays for 35 yards. If Arizona does not get the pick in the end zone, it will be a touchdown. Using the optional Quick Play turnover rule, Oregon's interception range is 1-11, (8+3) minus the Arizona adjust of -5, for a final value of 1-6. D20 roll is 7, Arizona's poor ball hawking skills give Oregon the touchdown! Extra point is good, 7-0.

Oregon kicks off, it's a touchback and Arizona takes over on their own 25, and they will roll on the -2 row of the drive chart. Arizona rolls a 44 on the 2D10 and a 9 on the D20. The first half of their drive is successful and goes 5 plays for 31 yards. (D20 = 9 refer to 21-35 column for drive yards) With the ball on the Oregon 44, Arizona rolls again, this time in the -8 row of the drive charts based on the difference in the QP Off and Def Drive 2 ratings. They roll a 64 with the 2D10, overcoming Oregon's defensive advantage and a 2 on the D20, giving a result of 5 plays for 40 yards on the QP Finish column, ball on the Oregon 4. Since the drive stalls inside the 10, roll a D20 again and refer to Arizona adjusted Goaline rating of 8. The D20 is a 14, Oregon stiffens and Arizona settles for a 21 yard field goal attempt, which is good. Oregon leads 7-3.

Quick Play Auto TD – Several results on the QP Finish show a number followed by TD (example 4-TD) This means the result is a touchdown in the number of plays specified and the yards added are from the spot of the ball to the endzone.

Optional rule – Quick play penalties: To incorporate penalties into quick play mode, roll 2D6 with each simulated drive roll. If doubles come up, resolve the drive results normally, then check for a penalty with an extra D20 roll. If a penalty occurs, follow the bullet points below.

  • Drive is successful and penalty is on the offense – The penalty kills the drive, subtract the penalty yardage from the drive and offense must kick from that spot (If the yardage gained before the penalty would be enough for a touchdown, spot the ball on the 5. It is 4th down and the offense can either kick, or go for it using their adjusted goaline rating.)
  • Drive is not successful and penalty is on offense – Subtract the penalty yardage from the drive and kick from that spot.
  • Drive is successful and penalty is on the defense – Add the yardage to the end of the drive and continue from that point.
    • If drive results in a TD prior to penalty yardage being assessed ignore penalty
    • If penalty yardage would move the ball into the end zone, spot the ball on the 1 and resolve Goaline rating to determine if the offense punches it in
  • Drive is not successful and penalty is on the defense – Penalty extends the drive, add yardage to the end of drive and do one of the following.
    • If this occurs on the first half of the drive, resolve second part of the drive normally
    • If this occurs on the second part of the drive and penalty moves ball inside the 10, resolve Goaline rating to see if the offense punches it in. If it does not move the ball inside the 10, resolve kick from the new spot. (If it moves the ball into the end zone, spot it at the 1 and resolve Goaline rating.)

Optional Rule – Close game late: If a team trails by 14 or less in the 4th quarter and the drive is stopped, they may elect to go for it on 4th down following the bullet points below.

  • Roll the 2D6, the number is the yardage to gain for a first down, so a roll of 5 makes it 4th and 5 from the end spot of the drive.
  • Roll 5 dice and refer to play by play mode to resolve the play as indicated in the appropriate section of this manual.
    • If the attempt is successful and it is the first part of the drive, resolve the second part normally
    • If the attempt is successful on the second part of the drive resolve the remaining portion of the drive in play by play mode.

Event Chart, Trick plays and Hail Mary's

Event Chart: Anytime a 99 is rolled on the drive chart the player will refer to the event chart, re-rolling the 1D10 and following the instructions on the event chart. Rolls of 0-4 refer the player to the rare event chart, which is resolved by a D20 roll. Regular events can occur multiple times in a game, while there can only be a single rare event in any one game. (Any subsequent rare events are ignored) Rolls of 53-61 result in a trick play being called (covered below). If playing in full play by play mode, the first 99 rolled each half will result in an event. Subsequent 99's are resolved on the regular play matrix.

Editor's note: the printed rule above says "re-rolling the 1D10", but the printed Event Chart is headed 2D10 and its results run 0-99. The text is transcribed as printed; the Event Chart itself is a separate printed sheet.

Trick Plays: When a 53-61 is rolled on the event chart a trick play will be called on the next available play by play opportunity. (1st play of the next play by play opportunity in hybrid mode and the very next play in full play by play mode) The trick play is resolved by rolling a D20 for the type of trick play, along with the 2D10 for the result. In quick play mode, the player will make a single play by play roll to resolve the trick play, If the play is successful, (positive yards) they will resolve and return to quick play. If the play is unsuccessful, they will complete the next simulated drive portion of play increasing the punt range by 5 on the drive chart, to account for the wasted play.

Hail Mary's: When attempting a Hail Mary (See optional close game late rule on page 5) the player rolls the D20 and 2D10, referring to the Hail Mary sub chart on the Drive Chart, with the D20 determining the distance of the throw while the 2D10 determines the result. Regardless of the outcome, a Hail Mary will be the last play of a game.

Using the Excel Helper

Note: If you do not own Excel, Google Drive has a free version that will open it.

For those that want to keep individual stats using hybrid or quick play modes, Glory Days College Football includes an Excel helper that can be used to track team statistics, as well as assign statistics accumulated during aforementioned modes to individual players if desired.

The Excel helper is broken down into 3 tabs:

  • Tab 1 PBP – For tracking all play by play stat results, used if playing hybrid mode or full play by play mode
  • Tab 2 Drive Sim – For tracking stats from simulated drives, as well as assigning yardage between running/passing and calculating incomplete passes. This tab is used in hybrid mode as well as quick play mode
  • Tab 3 Stat Helper – Used to assign stats accumulated in hybrid and quick play mode to individual player if desired

Play by play mode Tab 1

Fill in the team's information on the scoreboard, then the player's names under rushing, passing and receiving as indicated below. Next, determine the difference between the rushing/passing offense and the opponent's defensive ratings in those areas. Then enter the trench control ratings for that game from the appropriate column on the main trench control chart. Example: LSU will get their trench control values for this game from the -7 row on the trench control chart. (LSU Run Offense 4, minus Alabama Run Defense 11) Track yardage results in the boxes to the right of player's names for rushing and receiving yards, determining the ball carrier by the D20 roll. You will also need to track incomplete passes and total carries/receptions as you go, and enter those values in the blue boxes below. The excel helper will populate QB stats (you must enter TD's and interceptions) and total yardage automatically, populating this data in the appropriate fields. The helper is protected, so you will not be able to enter data in any field that the helper tracks, only the field's captured in the red boxes below. Individual carries and yards add automatically.

Stats for play by play modes can also be kept manually and a score sheet for tracking in this manner is included in the game. Simulated drive stats can also be tracked manually, but it is recommended that you use the Excel helper as it does basic calculations for the player. If using the quick play mode to simulate games for other teams, in a conference wide replay for example, you would not need to track stats, if only interested in the outcome of the game for standings purposes.

Simulated drive helper Tab 2

Set up: Before starting the game, enter the team names on the scoreboard, the total number of drives (add each teams drives from the team card together, divide by 2 and round down), Off and Def drive ratings. Then enter the 2nd O and 2nd D ratings, as well as the adjusted Goaline ratings if playing quick play mode. Next, enter the percentage the team runs the ball, obtained from the team card, under Run %. This is followed by YPC obtained from Run Off under QP adjustments, Def YPC, which is obtained from the opponents Run Def under their QP adjustments. Finally roll a D6 and refer to the QB Comp % on the team card and enter the number that corresponds to the roll, which will be the base QB completion percentage for this game.

[Excel helper screenshot from page 13 of the printed manual is not reproduced here.]

You are now ready to start the game and all simulated drives in both hybrid and quick play mode are tracked as follows. Enter the team starting position on the drive under the start column. Then the number of plays, yards for the simulated portion of the drive. If using the quick play mode, the second half of each drive will be entered to the right of the first, in the same format. Finally, you will enter the result of the drive (TD, punt, etc) in the result column. This process is completed for every simulated drive for the remainder of the game, and the Excel helper will divide the stats and populate in the boxes to the right, indicated by the red arrow.

If a Big play occurs during a simulated drive, obtain the result as explained in the rules, enter BP under the play column for that portion of the drive, leave the yards column blank and enter the big play results as follows. Determine the recipient of the big play with a D210 roll [sic; the printed text reads "D210", and the big-play recipient is identified with the D20 as described earlier in these rules] as explained in the rules, populating their name in the gray shaded box, with the yardage result directly below. If a TD results from the big play, this would be indicated in the box below the yardage. Next, enter the total big plays per half in the blue box for runs and enter in both the blue and green boxes for passes. The latter represents attempts and completions for big plays and will always be the same number, 1:1, 2:2 etc. Final stats, adjusted by big plays will then appear in the blue boxes next to Total above, as indicated by the green arrow.

This will give you a breakdown of total yards from all simulated drives which you can then convert to individual player stats if desired, by following the instructions on the next page for the stat helper.

Stat helper Tab 3

Set up: First, enter the letter grades for each ball carrier (running backs and receivers) located on the team cards next to the player name under rushing and receiving. Enter the first players name under rushing next to RB 1, the seconds next to RB 2 and so on, repeating this process for the receivers, top to bottom as well. Next enter the Yd Adj for each player next to the letter grade, which will ensure a more accurate distribution of stats (shown in the red box.)

Run %, YPC, Def YPC and completion % entered on the Drive sim tab are pulled in automatically, as are the simulated drive stats within the blue box and Big play runs and passes. You are now ready to assign stats to individual players.

Step 1 – You will now have base stats for each player based on the letter and yardage adjustments entered in the set up portion. The final stats are now ready to be entered in tables above indicated by the blue arrows from the box to the left. These tables are used for final reconciliation of stats, which include adding in big plays and adjusting for variances in carries or yards, which will be reflected in the boxes highlighted in the orange box above. For RB1 in the print above, his base was 8 carries for 43 yards, plus he had 1 big play run for 24 yards. So his final totals entered in the table to the right would be 9 carries for 67 yards.

Step 2 – Reconciling. As mentioned in step 1, variances may exist in final stats and would be shown if the numbers in the yellow highlighted cells outlined by the orange box shows anything but 0 – 0.

Examples: If for instance the final stats box next to the rushing breakdown showed -1 and -4 in the two cells (see below.) This would mean, we need to subtract 1 carry and 4 yards from the RB6 who currently has 9-33. This would make their final totals 8-29, which would balance. When subtracting in this manner you start from the bottom up, taking no player below 1 carry, though a player could have negative yards. Conversely if there is a positive total such as 2 12, you would add 2 carries and 12 yards to RB1's totals. The same concept applies to receivers and you will use discretion here to achieve balance. Normally the adjustments are very slight.

[Negative and positive discrepancy example tables from page 15 of the printed manual are not reproduced here.]

As you complete this step, total stats will now be complete in the chart indicated by the red arrow, which also pulls in all names and stats from the PBP tab. (If using Quick Play option, only enter names in the PBP tab)

  • Short pass play matrix: Used to find the result of a short pass play in play by play mode, (and play by play portion of hybrid mode) by cross referencing a D10 roll against the column determined by the trench control result.
  • Long pass play matrix: Used to find the result of a long pass play in play by play mode, (and play by play portion of hybrid mode) by cross referencing a D10 roll against the column determined by the trench control result.
  • Ball carrier matrix: Chart used to determine the ball carrier for all running and passing plays in play by play mode (and the play by play portion of hybrid mode) referencing the D20 roll and matching the result against the numbers in the appropriate column. Example: Referencing Georgia's team card on the next page, a roll of 1-6 on the D20 on a running play would mean White (rated a 6) was the ball carrier. The letter grades are used to allot touches in the simulated portion of hybrid mode and quick play mode (if desired) using the games excel helper tool, explained later.
  • TO/Sacks: This mini chart contains the teams fumble, interception and sack ratings under the Off column and the defensive adjustments under the Def column. This is used in all game modes to determine sacks and turnovers. Underneath this mini chart is the QB Comp% results used to assign completions/incompletion results in the simulated portion of hybrid mode and quick play mode.
  • Team Charts: These charts contain the results for special teams, team specific turnover returns, kickoff/punt returns and Stuff results. Below that the Run Off, Run Def and Pass Off numbers are used in the simulated drive portion of hybrid mode and quick play mode.
  • Rushing and receiving columns: Used in all game modes to distribute carries and to apply yardage adjustments for the ball carriers on all results taken from the drive charts, as well as results obtained from the stalemate column (-) on play by play results.
  • Special teams ratings: Field goal/extra point percentages, team specific return results and stuff results are contained on the team charts section of the card.
  • Yardage multipliers: Used for running plays (offense & defense) as well as receiving yards. These numbers are entered on the simulated drive chart for both hybrid and play by play modes. In play by play mode, the yardage adjusters are also applied to all results taken from the stalemate column (indicated by -)