A Duel for Falling Cherry Blossoms: New Act – 9th Expansion
A Duel for Falling Cherry Blossoms: New Act – 9th Expansion Rulebook
Table of Contents
Table of Contents
Additional Rules
Terms in this section follow the base game's English rulebook where one exists. A player "hosting" a Megami (宿し) means that player's Megami. Card numbers are reproduced exactly as printed.
§1 Introduction
These are the additional rules for A Duel for Falling Cherry Blossoms: Revived. They describe the rules added by the Megami chosen in Twin-Handed Rapture.
§2 About the Additional Rules
2-1 Contradictions with the Core Rules
If the additional rules and the core rules contradict each other, the additional rules take precedence.
2-2 Megami Not Included in the Revived Edition
The Megami below are not included in the Revived edition. They exist only in New Act, but their text is kept here for compatibility with the Classic Battle (古典戦) format.
Utsuro, Honoka, Yatsuha, Hatsumi, Mizuki, Kanawe, Kamui, Renri, Akina, Shisui, Misora, Inil.
§3 Oboro (オボロ)
3-1 Additional Cards and Components
When preparing the Sakura Duel, a player hosting Oboro in the 『第三章』 ("Third Chapter") form places the card numbered RE-05-oboro-A1-S-4-Ex1 face-up in their
When preparing the Sakura Duel, a player hosting Oboro in the 『消失』 ("Vanished") form places face-down in the
3-2 Installation
Some of Oboro's cards carry this text. Installation has no effect by itself. It is referenced by 3-3 below.
3-3 Added Rule Effects
A player hosting Oboro has the following rule effects.
If you are about to reshuffle your draw pile, you may use one card with Installation from your face-down cards immediately before doing so. This effect is resolved as a situational effect immediately before you reshuffle (the card is used before any Life payment and so on).
A player hosting 『消失』 Oboro also has the following rule effect.
If a part with Digi-Installation is assembled and you are about to reshuffle your draw pile, you may instead choose to perform the following procedure.
- From the assembled parts, choose one Main Part and any number of Custom Parts.
- Reveal all of the chosen parts.
- Determine the effects of the Custom Parts according to the number of Custom Parts revealed.
- In the
zone, generate an Attack. The Attack's "Classification," "Appropriate Range," "Damage to Aura," "Damage to Life," "User," and "Text" are the same as those of the revealed Main Part. Add the Custom Part effects determined in step 3 to the Attack's text, in any order. - Make all parts unassembled, including those not chosen in step 1.
- Perform the Appropriate Range check shown in core rule 9-4-1. If the check succeeds, the attack succeeds and you proceed to step 7. Otherwise, remove the Attack and end this procedure.
- Resolve the Attack generated in step 4.
This procedure replaces the reshuffle, so it does not count as having reshuffled your draw pile. (No Life payment or other cost occurs, and cards with Installation cannot be used.)
3-4 Object: Parts
A part is an object with physical presence, represented by a card. All parts are cards described in core rule 1-3.
Parts are either Main Parts or Custom Parts. Only a player who can see the face of a part learns whether it is a Main Part or a Custom Part.
3-4-1 Main Parts
A Main Part is also an object: a card, whose classification is Part.
3-4-2 Custom Parts
A Custom Part is an object: a part.
A Custom Part carries text as information. Each of its texts is labeled with a numeral from 壱 (one) to 肆 (four). When the effect of a Custom Part is determined by the procedure in 3-3, the text whose numeral equals the number of revealed Custom Parts is chosen.
3-4-3 Possible States of Objects
A part is either face-up or face-down. Face-up parts are placed face-up; face-down parts are placed face-down.
3-5 Object: Attack
Add "Part" to the classification information of an Attack object.
3-6 Digi-Installation
The Main Parts of 『消失』 Oboro carry this text. Digi-Installation has no effect by itself. It is referenced by 3-3 above.
3-7 Assembling X Parts
To "assemble parts," choose the specified number of unassembled parts from among all unassembled parts and make them assembled. Then, if there are 6 or more assembled parts, disassemble parts so that 5 or fewer remain assembled.
3-8 Disassembling Parts
To "disassemble parts," repeat the following until the specified number of parts remains: choose one part from among the assembled parts and make it unassembled.
3-9 Zone:
The
Only parts may be in the
Face-down parts in the
A part in the
§20 Renri (レンリ)
20-1 Additional Cards
When preparing the Sakura Duel, a player hosting Renri places the card numbered NA-22-renri-O-S-4-Ex1 face-up in their
When preparing the Sakura Duel, a player hosting Renri in the 『歴史家』 ("Historian") form places the cards numbered NA-22-renri-A1-N-6-Ex1, NA-22-renri-A1-N-6-Ex2, and NA-22-renri-A1-N-6-Ex3 face-down in their
20-2 Zones
20-2-1
Add "face-down" to the possible states of cards in
20-2-2
Only cards whose classification is Normal card may be in
20-2-3
Only cards whose classification is Normal card may be in
Cards in
The effects of cards in
20-3 Bluff
Some of Renri's cards carry this text. Bluff has no effect by itself. It is referenced by 20-6 below.
20-4 Bluff Installation
Some of 『歴史家』 Renri's cards carry this text. Bluff Installation has no effect by itself. It is referenced by 20-6 below.
20-5 Revert
Some of 『歴史家』 Renri's cards carry this text.
When a Challenge against a card with Revert fails, you may interrupt the Bluff procedure and perform the following procedure. Starting this procedure is called "reverting."
i. Move the card numbered NA-22-renri-A1-N-6 from
ii. Return to resolving the Bluff. If the card used for that Bluff would move from
20-6 Added Rule Effects
20-6-1 Bluff
A player hosting Renri has the following rule effects.
When you use a Normal card from your
i. Move the selected Normal card face-down into its owner's
ii. Declare the name of one card that has Bluff originally, from the card list of the Megami that the player hosts. (The declared card may be represented with a Bluff proxy.) However, a card name already declared by a Bluff this turn cannot be declared.
iii. Treat the card as the declared card, and perform the steps of the card-use procedure up to and including the payment of costs (core rule 9-2-1 up to ii, and core rules 9-2-2 and 9-2-3 up to i).
iv. The opponent may choose to Challenge.
v. Move the selected Normal card to its owner's
If a rule or effect allows using a card from a zone other than
20-6-2 Bluff Installation
A player hosting 『歴史家』 Renri has the following rule effect.
If you are about to reshuffle your draw pile, you may, immediately before doing so, select one face-down card and perform a Bluff with it. The card names you may declare with this Bluff are only those of cards that originally have Bluff Installation.
This effect is resolved as a situational effect immediately before you reshuffle (the Bluff is performed before any Life payment and so on).
20-6-3 Challenge
When a Challenge is declared, reveal the card in
If they match, the Challenge is considered to have failed, and the player who made the Challenge receives Cowering.
If they do not match, the Challenge is considered to have succeeded. Move the card in
20-6-4 Ending a Phase
Add the following to the effects that end a phase.
If a card is in
§23 Misora (ミソラ)
23-1 Player Information
23-1-1 Aim (照準)
A player hosting Misora has an Aim (照準). The Aim is either "None" (『なし』) or an integer value. Whether an Aim exists and its value are public to both players. When the Aim has a value, place an Aim token on the Aim board to show it.
23-2 Added Rule Effects
A player hosting Misora has the following rule effects.
At the end of your Main Phase, if you performed an Attack this turn, your Aim becomes "None."
During your End Phase, you may set your Aim to the same value as your current Range.
23-3 Aim Is On Target (照準が合っている)
For an Attack, "the Aim is on target" means that the Aim has a value, and both that value and the current Range are included as elements in the Attack's Appropriate Range.
23-4 Tracking (追尾)
An Attack whose text says "Tracking" uses the Aim's value in place of the current Range when performing the Appropriate Range check shown in core rule 9-4-1.
(If the Aim is "None," the Appropriate Range check always fails.)