Dego
Dego Rulebook
Table of Contents
Table of Contents
1.0 Introduction
1.1 Game scale
In N-SB each hex, called a "Hex", represents about 300 metres, that is the space normally needed to deploy one battalion in line and up to three in depth. Roughly, each strength point represents about 200 infantry or 100 cavalry, while artillery receives a value based on calibre, number of guns and the training of the crews that serve them. One turn simulates half an hour of real time.
The values printed on combat units (CU: battalions, squadrons and batteries) show their fire, melee, movement and morale capabilities. Those on the counters representing operational commanders (brigades, divisions or corps) show their command capability and the distance in hexes at which they can send orders to the CUs that depend on them. The exception is the limbers (traini), for which the movement value, so as not to be confused with the formation modifiers, is printed inside a circle.
The background colour shows nationality: white for Austrians, blue for French and red for Piedmontese. The coloured upper stripe identifies the infantry division or cavalry brigade to which the unit belongs. The colours of the Austrian uniforms and of the plumes on the French units, together with the name on the coloured stripe, identify the individual regiments.
1.2 Game markers
The game includes a number of markers that help the players manage the battle. Their use and meaning are explained in the rules as they become necessary.
1.3 Components
Each copy of NSB Dego consists of:
- 1 map in A3 format
- 2 sheets of die-cut counters
- 2 order sheets
- 1 terrain effects sheet
- This rulebook
1.4 Commanders
As shown on the summary card, commanders are divided into:
- Commanders-in-Chief (CiC): Napoleon for the French and Argenteau for the Austrians.
- Senior Commanders (CC): corps or wing commanders.
- Operational Commanders (CO): division or column commanders.
- Subordinate Commanders (CS): brigade or regiment commanders.
All commanders have 6 PM, have no front, and can always control the CUs under their command.
2.0 Turn Structure
Each game turn is made up of the following phases:
- Command phase.
- Activation phase.
- Morale phase.
- Administrative phase.
Within each phase, only the actions provided for that phase may be carried out.
3.0 Command Phase
At the start of the command phase the commander counters are turned over. Commanders temporarily removed from play (6.7.2) return to play. The players decide which commanders will remain in the field and which will go to the routed-units area to aid their recovery (7.2.2), or re-enter from it. Engineers may be turned to show their combat side or their "working" side (7.0). Starting with the CiC and moving down to the individual CUs, the chains of command are checked and isolation markers are placed (5.1.2). Isolated commanders automatically receive and activate the Defend order, while the others place their order markers face down on the order sheet.
Example: at the start of the command phase the Austrian and French players turn over all the commander counters, which at that moment show the national flag, so that the side bearing the name is visible.
Having done this, the French player takes the counter of Brigadier Fornasy, present in the space for the turn that is just beginning, and places it on any of the units with the same divisional colour. Then the lines of command are checked: without their divisional commander, both Fornasy and Rampon receive "Out of Command" markers.
Placing the activation markers of the operational units into an opaque container concludes the command phase.
3.1 Orders
The orders that commanders can receive are:
3.1.1 Attack
All CUs under command must move at least 1 hex towards the nearest enemy CU.
Example: at the start of the second turn, Argenteau has an Attack order. The two battalions in hex 1306 can therefore only fire or enter melee with the French battalion defending Madonna del Bosco, while the battalion in 1106 must wheel and enter 1206, because otherwise it "would not move at least one hex towards the nearest enemy CU", as the order requires.
3.1.2 Defend
The commander may move only one hex, and the CUs may not voluntarily leave the command radius or start melees.
Example: if in the previous situation Argenteau operated under a Defend order, the battalions of the 59th could pass round the flank of the French battalion and fire on it alone, or with the subsequent support of the 19th, which could instead wheel to cover the flank or advance on Casa Ferrè, threatening also the position of the second French battalion.
3.1.3 Manoeuvre
The commander and CUs may move freely provided they remain at least 3 hexes away from other hexes containing enemy infantry or cavalry CUs. If enemy movement brings one or more of them within that limit, the order of the operational unit changes immediately to "Defend", and the opponent, if it still has MP available, may continue to move.
Example: during its turn the Austrian cavalry occupies Cà Ferrè, bringing itself within 3 hexes of the French units. The Ussars being a formed unit, and not Skirmish or artillery, Cerboni's order changes immediately from Manoeuvre to Defend.
N-SB uses the basic orders of any pre-radio army, as they were usually carried out in the field. Thus, just as an attack continues until it "consumes" the formation or achieves its result, defence is decided by the commander of the unit and does not prevent its units from carrying out counterattacks or even pre-emptive attacks to obtain better positions or drive off the threat. Manoeuvre is the Cinderella of operations, because it implies a situation in constant change, and this prevents the commander from making a clear choice, since it could do more harm than good.
3.1.4 Regroup
The commander cannot move. If the hex it occupies is subjected to fire, the test for losses (6.7) is made with a +1 modifier to the die. CUs may be moved only to approach the commander or to move from the hex it occupies into an adjacent one. When the commander is in the same hex as the units under its orders, it may attempt their recovery (7.2) during its activation.
3.1.5 Outflank
The player assigns to a commander who is in command line with its direct superior the order to go to a hex marked with a well-defined geographic objective (a village, a single building, a ford, a bridge or a mountain), by the shortest route or by indicating the intermediate points to pass through. The commander, any subordinates and the CUs following it never become isolated, but must move towards the indicated objective following the rules for the Manoeuvre order (3.1.3). If one or more CUs whose commander operates under the Outflank order come within less than 3 hexes of enemy CUs, the order does not change to Defend, but the movement factor is halved, rounding any fractions up. The CUs, provided they do not move away from the indicated objective, may approach the enemy, engaging it in melee and fire combat.
Once the indicated objective is reached, the commander immediately activates the Defend order.
Example: at Dego, the only Outflank order in the game is the one with which General La Salcette begins scenario 1. Under it, La Salcette must reach the village of Griffini in the fewest possible turns and from there Bric Sodano and finally one or more of the hexes of Cà Sodano. Having entered 1415, he is within 3 hexes of the Chiaffoni garrison (and from the next activation his infantry will move only 2 PM), and must decide whether to head for the village, opening a path by fighting, or move slowly to 1614, where he will again be 3 hexes from the enemy and can resume moving at full factor.
3.2 Aggregation
A commander may take charge of a number of isolated CUs that are within its command radius, which equals its command capability plus one.
3.3 Chain of command
Commanders can directly control the counters of their subordinates. CSs can control any CU of the division or column to which they belong or which is aggregated to it (3.2).
Example: in scenario 1 all the French CUs can be activated by Napoleon, while Massena can activate only those of his own division (red stripe) and not those of Laharpe (white stripe).
4.0 Activation Phase
One of the players draws an activation marker from the container, and the player controlling the commander concerned checks that the newly revealed order is the same as the previous one. If so, it is activated; otherwise the activation of the new order is checked (4.1).
The activated commander may move itself and all the CUs that depend on it, carrying out, one hex at a time, the actions provided by the order under which the unit operates. After all the hexes containing CUs under command that belong to the operational unit have been activated, the activation is over. The activated commander is turned to show the national-flag side, and a new activation marker is drawn. Remaining still in a hex is a valid activation.
Isolated commanders (CS and CO) without an order of their own automatically activate the Defend order.
The activation phase ends when all activation markers have been drawn from the container.
4.1 Order activation
When the player draws an activation marker, he reveals the order received. If the activation marker belongs to a CS, the player may choose whether to activate the order or to ignore the draw, placing the activation marker on the order sheet next to the CO on which it depends.
Example: the French player draws Cerboni's marker and chooses whether to activate him and the CUs within his command radius, or to discard the marker and wait for Massena's draw, so as to activate all the non-isolated units of the division in one go.
If the new order is the same as the previous one, it is automatically activated. Otherwise the player must roll 1D6: if the die value, increased by the command capability of the commander making the roll, is 6 or more, the order is activated. If not, the commander continues with the previous order.
At the start of the game all assigned orders are automatically accepted.
Example: Fornasy has a Defend order. If the new order is also Defend, nothing needs to be done. If it were, for example, Attack, the player would roll 1D6 adding +2 (Fornasy's command value), dropping the Defend order and starting to operate under the Attack order (3.1) if the result is 6 or more.
CiCs, and commanders who begin the turn in the same hex as a superior, automatically activate the new order. Commanders within the command radius of a superior may add the command capability to the value obtained with the D6 roll.
Example: if Fornasy is within the command radius of Laharpe, the roll for the order change is modified by +3 (+2 for Fornasy and +1 for Laharpe).
4.1.1 Repeated orders
If an order is not accepted, the player may decide to leave it on the sheet, to be activated again on the following turn with a cumulative +1 modifier to the die roll.
Example: in the previous case the order-change roll fails. The order may be repeated, and from the following turn the modifier is +4, which becomes +5 the turn after that.
4.2 Activation of tactical units
The player activates, one at a time, all the hexes containing CUs of that commander, moving them and having them fight within the limits imposed by the order received. Remaining still is considered a valid activation.
5.0 Movement
Once a hex has been activated, the movements and combats generated by the counters in it (A) must be concluded before another hex can be activated (B). Therefore, if several battalions are activated in the same hex (A), the player may move them together, having them carry out different actions.
The movement of CUs in line or in battery is carried out by moving the counter into the hex immediately in front of it (5.6) or behind it (5.6.2). It may trigger opportunity charges and/or defensive fire (6.0) from the opponent.
The player is never obliged to spend all the MP available. He may decide not to activate a hex, to activate only some of the CUs in it, or to carry out combats without first spending any MP.
Unused MP are lost.
Changing the order of the counters within a stack (5.3) counts as movement, but costs no MP.
5.1 Formations
Infantry and cavalry CUs are considered to be in line, and artillery CUs in battery. Any other formation is indicated by placing the corresponding indicator on the counter, or by turning it to show the "mob" or "limbered" (al traino) side. CUs in the same hex may have different formations.
5.1.1 Counter orientation
All CUs have a front, two flanks and a rear. The three hexes ahead constitute the front, the two lateral hexes the flank, and the rear hex the back. Artillery CUs have no flank: treat their flanks as rear.
5.1.2 Isolated counters
Isolated CUs may use up to half of their MP to wheel, to move towards their commander, to change formation, or to combine these three actions.
5.1.3 Squares
CUs in square face on all sides, have 1 MP, and may enter any adjacent hex.
5.1.4 Skirmishers
Skirmisher CUs face on all sides and may enter any hex without wheeling.
5.1.5 Column
CUs in column that begin and end their movement on a road, without leaving it, spend 1/2 MP per hex, regardless of the type of terrain in it and of any change of facing needed, but they pay for changes of level.
5.1.6 Limbered
Limbered batteries have no front. They cannot cross steep slopes or scarps, but they may move along a road, paying 1/2 MP per hex regardless of the terrain crossed, and paying for changes of level.
5.1.7 Mob
Mob CUs face on all sides. If they begin and end their movement on a road, without leaving it, they spend 1/2 MP per hex regardless of the terrain and of any changes of level. If engaged in melee, they defend with a single die, regardless of their real value.
Translator's note: the Mob indicator prints "1 | +1 | *". Section 6.1.1 reads the asterisk as meaning the unit rolls no D6, while 5.1.7 says Mob units defend in melee with one die. The printed rules do not reconcile the two, and both are kept as printed.
5.2 Choice of formation
At the start of the game the player decides the formation of each of his CUs. Those able to do so (5.4) may release one or more skirmishers.
During play, infantry or cavalry CUs that find themselves more than 3 hexes from the enemy may assume the Mob formation without spending MP. When they are activated at 3 hexes or fewer from enemy counters, or when, by moving, they come to that distance, the player controlling them may:
- Choose a formation (including Mob), spend 1 PM and place the corresponding indicator on the tactical unit.
- Keep the existing formation.
- Release one or more skirmishers (5.4, 5.5).
5.2.1 Square under charge
Infantry CUs charged by cavalry may attempt to form square by rolling 1D6 and increasing the score obtained by 1 (2 if Mob) and by the losses suffered (6.6). If the score is less than or equal to their own morale, they receive the Square indicator; otherwise they receive the Mob indicator.
Forming a square takes time. If an attempt is made when the unit is disordered, has suffered losses, is in the urgency of the moment (between the start of the charge and contact rarely more than 5 minutes pass), or is simply poorly trained, the attempt will probably fail. The result is that the square does not close, the cavalry penetrates inside and begins sabring whoever stands in its way.
Example: Austrian hussars declare a charge against the infantry of Massena's division, and the French player tries to put them in square. Both battalions have morale 4, but that of the second battalion is reduced to 3 by the loss it has suffered. Since the die roll is increased by 1, the first unit succeeds on 1, 2 or 3, while the second succeeds only on 1 or 2.
Translator's note: the rule text adds the losses to the die score, but the example (in which the second battalion, with morale reduced to 3 by its loss, succeeds on 1 or 2) only works if the losses reduce morale and the die is increased by 1. Both the rule text and the example are kept as printed.
5.3 Stacking
The presence of one or more CUs in the same hex is called a stack. At the end of movement, the same hex may contain, besides an unlimited number of commanders, two skirmishers or only one, and up to:
- 3 batteries.
- 2 batteries and 1 battalion.
- 1 battery and 2 battalions of the same regiment/demi-brigade.
- 3 battalions of the same regiment/demi-brigade.
- 2 battalions of different regiments or demi-brigades.
- 1 cavalry regiment.
- If moving on a road, 1 CU.
Cavalry and artillery may never be in the same hex.
Example: the French battalion activates, spends 2 PM to advance that many hexes, and uses the remaining 2 PM to detach 2 skirmisher counters, which may in turn spend 3 PM (not 6, since they have only just been detached) to reach the indicated positions, thus blocking easy access to Monte Traversino.
5.4 Light infantry
Light infantry (DBL), Grentz or Jäger may spend 1 PM to release a unit of skirmishers in the hex they occupy, increasing by one the loss indicator of the tactical unit. Releasing skirmishers counts as movement.
5.5 Skirmishers
In the turn in which they are released, skirmishers have only 3 PM. Skirmishers may not voluntarily leave the command radius of the commander on which they depend. If, during movement, they come to be in the same hex as light infantry (DBL), Grentz or Jäger, they may spend 2 PM and be absorbed by it, adjusting its loss indicator without exceeding its initial value.
5.6 Terrain costs
The cost of entering the frontal hex varies with the terrain, as shown in the attached table.
Translator's note: the terrain table is on the separate terrain effects sheet, which is not part of this PDF.
5.6.1 Wheeling
Wheeling the front of a CU by one hexside costs 1 PM.
5.6.2 Backward movement
To move backwards, CUs spend 1 PM more than the cost of the terrain they enter.
5.6.3 Fords
If the scenario allows, CUs may look for fords in any river hex next to them. They roll 1D6 for each PM they intend to spend on the search, adding the capability of any commanders present. If they obtain a 6, they place a ford indicator on the map and the hex is treated as a stream. Only one attempt per hex per turn is allowed.
5.7 Artillery movement
Artillery CUs that spend half or more of their maximum movement receive the "limbered" (al traino) indicator and cannot fire in that turn. Removing the limber indicator costs 1 PM. Therefore, to move and fire in the same turn, a limbered battery must not spend more than half of its available MP, including the one for going into battery.
Example: the French player decides to advance the limbered battery to support the attack on Monte Traversino. With movement 6, to unlimber and fire at the end of its movement, the French artillery may not spend more than 3 PM. It therefore advances 2 hexes along the road and uses the third to go into battery. Having spent only half of its available MP, it can fire against the Austrian infantry defending the pass. Friendly infantry in the hex immediately in front does not block the line of sight, as it is lower than the target.
6.0 Combat
Combat is a function of movement and is carried out by performing the following actions:
- When the attacker moves or wheels to within two hexes or fewer of enemy cavalry CUs, if the terrain does not prevent it, that cavalry may carry out an opportunity charge (6.5).
- When the attacker arrives adjacent to an enemy cavalry CU, if the terrain does not prevent it, that cavalry may retreat one hex without spending any MP.
- When the attacker moves into a hex that contains no other friendly CUs and is adjacent to one or more enemy CUs, these may carry out defensive fire (6.1).
- When the attacker changes the order of the CUs of a stack in a hex adjacent to one or more enemy CUs, these may carry out defensive fire (6.1).
Example: French infantry advances one hex and the Austrian hussars may attack it. It would be better to wait until it climbs the hill, so as to charge it in the flank and gain bonuses, but since it would have to climb a scarp, the charge is not allowed (6.5). In the second drawing, the cavalry decides to withdraw, because it is allowed to climb or descend a steep slope.
After any defensive fire, the attacker decides whether to:
- Stop and fire (if it is the first CU of the stack).
- Continue to move or wheel.
- Enter the hex occupied by the enemy and carry out melee with the CUs of the stack that have not fired (6.4). In this case, enemy skirmishers may attempt to withdraw before the melee (6.4.4).
Example: the Austrian player declares that he wants to enter melee with the skirmisher company defending Madonna del Bosco. The French player may decide to wait for the enemy, or to withdraw into one of the hexes not adjacent to the enemy.
If the CUs are activated in a hex adjacent to that occupied by the enemy, offensive fire takes place before any defensive fire. Combat may be carried out by the first CU and by any artillery present in the stack or within range.
Example: the Austrian player starts the activation with all three battalions of the 50th IR (Infanterie Regiment) in the same hex. Having activated in the hex adjacent to the French, the Austrian fires first, and the French player, after suffering any damage, returns fire. The Austrian can now move the second battalion to the top of the stack, and the French player fires first, while the second battalion returns fire after suffering damage. The same happens if the Austrian player decides to move the third battalion to the top of the stack to fire again.
6.1 Defensive fire
When the activated CU enters and/or performs a rotation (5.6.1) into an empty hex, or becomes the first CU of a stack located in one of the front hexes of an enemy CU, not because of movement or because one or more skirmishers have been eliminated, that CU may forgo the possibility of fighting in a possible melee and fire against the opponent. It rolls a number of D6 equal to its value reduced by any losses, modified according to its own formation and the enemy's formation.
If several CUs are present in the hex, only the first fires, together with any artillery, which may begin firing alone as soon as a CU enters its arc of fire, firing at it in every hex it enters that is visible to them.
Add up the values of the dice of all the CUs that fire: for every X points obtained (see the terrain table) the opponent suffers a loss (6.6). If the combat value falls to zero, the CU is routed and moved to the routed-units area on the map edge set aside for that purpose.
Commanders cannot be fired upon.
Example: the Austrian player, having activated the three battalions in the same hex, may at the end of movement roll 9D6: 4 for the battalion at full strength, 3 for the one that has suffered 1 loss and 2 for the one that has suffered 2 losses.
6.1.1 Formations
The values shown on the formation indicator are the D6 to add or subtract when engaged in combat. The number on the left is the modifier when the CU fires; the central one is used when the opponent fires at it; and the one on the right is the melee modifier of the CU, which is independent of who conducts the melee.
Any value that appears without modifiers (+/-) indicates the number of D6 the CU rolls, regardless of its strength. The asterisk indicates that the unit rolls no D6.
For the purposes of modifiers and losses, fire always applies to the first CU of the stack. If it is eliminated, excess losses are absorbed by the CU that becomes the first of the stack, regardless of its formation.
Example: CUs in column roll 2D6 fewer than their strength when they fire, and 2D6 more when they attack in melee, while the enemy always rolls 1D6 when it fires at them. If you fire at limbered artillery, add 1D6, while the artillery cannot fire at you or enter melee.
6.2 Offensive fire
Offensive fire is carried out against targets in the front arc of the CU, following the same procedures as defensive fire, and it concludes the movement. It is not obligatory to carry out offensive fire with all the CUs able to do so. If the CU is activated in a hex adjacent to that occupied by the enemy, offensive fire takes place before defensive fire.
Commanders cannot be fired upon.
6.2.1 Fire against skirmishers
Fire against hexes containing skirmisher CUs is carried out by rolling 1D6 for each CU that fires, regardless of its value or formation. The dice scores are added together, and for every X points obtained (see the terrain table) one skirmisher CU is eliminated. If all the skirmishers are eliminated and there are still CUs in the hex, excess losses are absorbed by the first CU of the stack.
Example: in the same situation as the previous example (6.1), supposing that all three battalions were activated together, that is they started from the same hex, the Austrian player rolls 3D6 and adds the values. If he obtains a single loss, he eliminates the skirmisher CU. If he obtains two, the damage is ignored or absorbed by a possible second CU, skirmisher or not, present in the same hex.
6.3 Ranges
Artillery CUs may fire at any target within their arc of fire, each time it enters a hex within their line of sight (6.3.1). The distance at which CUs can fire is as follows:
- Cavalry does not fire.
- Infantry and skirmishers fire at a distance of 1 hex.
- Artillery uses all the D6 it has against adjacent targets, and subtracts 1D6 for each hex of distance beyond the first.
If other CUs are in the hex of the firing artillery, they may combine their fire with it only if the player controlling them expressly declares so, thereby giving up fighting in any melee provoked by the CU that has just been fired upon.
6.3.1 Lines of sight (LoS)
To fire at range, artillery must see the target. Draw a line between the centre of the hex in which the battery is and the centre of the hex containing the target, referring to the terrain table to check whether obstacles in one or more of the hexes crossed block the line of sight. If they do, the battery cannot fire.
6.3.2 Counter-battery fire
Any artillery fire directed against artillery CUs ignores the loss value of the hex and hits only on a 6; all results other than 6 are ignored. If the battery is in a redoubt, 3 hits are needed (you must roll three 6s) to inflict a loss; 2 if it is on an earthwork or in a castle; and 1 on any other type of terrain.
6.4 Melee
When one or more CUs enter a hex containing enemy CUs, they roll a number of D6 equal to their value reduced by any losses, modified according to their own formation and the enemy's. Add up the values of the D6 and eliminate one enemy strength point for every X points obtained (see the terrain table).
Enemy CUs that have not carried out defensive fire against this attacking move may roll their dice for the melee. In this case, the allocation of losses is simultaneous.
At the end of the melee, all the defending CUs in the hex must withdraw or roll 1D6 for each of them. If they decide to withdraw, or obtain a value above their morale reduced by the losses suffered, they must withdraw 1 hex in the direction opposite to that from which the enemy entered, re-orienting without any cost until they face the enemy. If such a withdrawal takes them off the map, they are eliminated and placed in the routed-units area. If one or more of the defending CUs passes the morale check, it is up to the attacker to decide whether to withdraw or to carry out the check. If CUs of both players remain in the hex, the melee continues.
6.4.1 Melee terrain
In the first melee phase, the losses suffered by the defender are calculated according to the terrain on which it stands, while those of the attacker are always considered on flat terrain. In subsequent melee phases, all CUs are considered to be on flat terrain.
Example: if the melee takes place at Madonna del Bosco (1307) and the opponent enters from 1306, he rolls 5D6 (4 for his value and 1 for the attack from the flank), giving the enemy one loss for every 8 points (7 for the wood and +1 for the building). If he enters the hex from 1406, only one loss for every 9 points (as before, but with another +1 for the climb). In both cases the defender inflicts one loss on the attacker for every 6 points. From the second melee phase onward, both players inflict a loss on their opponent for every 6 points.
6.4.2 Target aspect
If one or more attacking CUs enter melee on the flank of the defender, the attacker adds 1D6 and the defender subtracts 1D6. If one or more attacking CUs enter melee at the rear of the defender, the attacker adds 1D6, the defender cannot withdraw, and if at the end of the melee it fails the morale check, it is routed.
Example: the Austrian player attacks the French battalion from the flank with the 1/IR19 and from behind with the 2/IR19. This allows him to roll 10D6 (8 for the CUs and 2 for the flank and rear attacks). If forced to withdraw, the French battalion is removed and placed in the routed-units area.
6.4.3 Commanders
The capability of the commanders present in a melee indicates the number of D6 to add to those of the CUs, and modifies in their favour the score obtained with the morale-check roll.
Example: if the French player has Rampon in the melee hex, he rolls 2D6 more and reduces by 2 all the scores obtained in morale checks.
6.4.4 Skirmisher withdrawal
If the hex attacked in melee contains one or more skirmishers, these may attempt to withdraw before the melee (6.0) by rolling 1D6 each. On an even number they are eliminated. Otherwise they withdraw one hex that is not adjacent to enemy CUs, preferably in the direction of the commander of their unit. If the CU entering the hex occupied by the skirmishers is cavalry, they are eliminated automatically.
Advancing into the hex previously occupied by the skirmishers does not provoke opportunity charges (6.0) or defensive fire (6.1), and it allows the attacker, if it still has MP available, to continue moving, fire, or start new melees.
6.4.5 Artillery
Batteries engaged in melee without infantry in the hex are routed automatically, and the attacker may continue moving and fighting. Otherwise they follow the fate of the CUs present in the hex. If forced to withdraw, batteries behave like skirmishers (6.4.4).
Example: in the case on the left, the two Austrian battalions enter melee with the French artillery, which cannot react and is eliminated. In the case on the right, the French artillery is supported by an infantry battalion, which is not eliminated by the Austrian dice. The defender's morale is checked: the infantry fails and withdraws, while the artillery must roll 1D6. If it obtains an even number it is eliminated; otherwise it withdraws into the hex opposite to the one from which the Austrians entered. None of this would happen if the infantry had passed the morale check successfully.
6.5 Cavalry
Cavalry CUs may fight only in melee, either through movement or by charge.
If the melee originates from movement or from an opportunity charge, they use their value. If it originates from a charge, they double it, except against enemies in column and in square.
Charges may be carried out only against CUs that were visible at the start of the charge, which stand on open terrain or on a road, and not across steep slopes or scarps.
6.5.1 Charge distances
To carry out a charge, cavalry must spend at least half of its MP, including those needed to enter the charged hex, without changing direction and without passing through hexes that are not open terrain or road.
6.5.2 Charges against columns
In a charge against infantry in column, the cavalry does not double its value, but the infantry defends with half of its available D6, rounded up.
Example: a French battalion at full strength in column, attacked by cavalry, defends with 2D6, while one with one or two losses defends with 1D6.
6.5.3 Charges against squares
Regardless of their values, both units roll 1D6, and they inflict damage on the opponent only on a 6.
6.5.4 Countercharges
Cavalry charged by other cavalry through its front arc may declare a countercharge, meeting the attackers halfway through the distance that separated them at the start of the charge. If the number of hexes separating the units is even, the point of contact is moved one hex towards the countercharging unit.
If the countercharge is carried out respecting the conditions for a charge (6.5.1), the countercharging cavalry also doubles its value.
Example: the three Austrian units charge the French cavalry, which decides to countercharge.
- Against the 3rd Dragoons, the clash takes place in the third hex, but only the dragoons double their value (3 PM spent out of 6 of movement, against the Austrian's 3 out of 8).
- Against the 4th Dragoons, the point of impact is moved one hex towards the French (the distance is even, otherwise the units would be in two different hexes). In this case both units double their value, having spent half of their MP.
- Against the 5th Dragoons, the clash takes place in the second hex, but neither side doubles its value (2 PM out of 6 for the French and 2 out of 8 for the Austrians).
6.6 Effects of losses
Each loss suffered reduces the combat and morale values of the CU by 1. Update them using the loss indicators.
6.7 Commander losses
Whenever the CUs in a hex suffer losses, the player controlling them must roll 1D6 for each commander present and check the result:
- If it is less than the losses just suffered, the commander is eliminated.
- If it is equal to the losses just suffered, the commander remains out of play for 1D6 turns and is placed on the turn indicator of the turn in which it may return to the field.
- If it is greater than the losses suffered, the commander remains unharmed.
Example: at turn 5 (09.00), Rampon and the battalion accompanying him are attacked and suffer two losses. The French player must roll 1D6 to see what happens to Rampon. If he rolls 1, Rampon dies and is removed from the game; if he rolls 2, he is wounded and the player rolls 1D6 to see when he will return to play; if he rolls from 3 to 6, he is unharmed. The French player rolls the first D6 and obtains 2: Rampon is wounded, and the player must roll a second D6, obtaining this time a 4. Rampon's counter is placed on turn 9 (11.30). During the command phase of the ninth turn, Rampon may return to play in any hex containing one or more CUs and/or commanders of the Laharpe division.
If a CU enters a hex containing one or more enemy commanders and no combat counter to protect them, it rolls 1D6 for each of them. If it obtains less than 6, the commander moves to the nearest friendly CU; otherwise it is captured. If the check is made by cavalry CUs, add 3 to the die score.
6.7.1 Captured commanders
Captured commanders are removed from the game.
6.7.2 Return to play
Commanders temporarily removed from the game return at the start of the turn (3.0), being placed on one of the CUs they command.
6.7.3 Voluntary removal
At the start of the administrative phase, the players may voluntarily remove commanders from the map, provided they are in command. They are placed in the routed-units area, and their command capability may be used to modify the recovery rolls of the CUs under their orders (7.2). Commanders so removed may be returned to play at the end of the administrative phase of the following turn.
7.0 Administrative Phase
During the administrative phase both players carry out the following actions:
- Check whether the scenario has ended.
- Check the arrival of any reinforcements.
- Attempt to recover routed CUs.
- Place a prepared-position indicator in the hexes containing engineer units in working mode.
- Advance the turn indicator one space.
7.1 Reinforcements
The scenario states when, which and from which hex any reinforcements enter play. Reinforcements pay the cost of entering the map according to the hex from which they enter. On entry they are in command, and they may exceed the stacking limits, but they must respect them at the end of movement or rout the excess CUs.
If the entry hex is occupied or adjacent to one or more enemy CUs, the reinforcements enter the following turn from the map-edge hex nearest to the one indicated in the scenario that is neither occupied nor adjacent to enemy CUs.
The player may at any time cancel, or postpone to the following turn, the arrival of his reinforcements.
7.2 Recovery of units
The player rolls 1D6 for each non-artillery CU in the routed-units area. If he obtains a 1, the CU may re-enter play with 1 strength point in the hex of the commander on which it depends, or, in case of overstacking (5.3), in the hex of a superior of that commander. If the player declines to bring it back into play, it remains in the routed-units area. During the administrative phase of the next turn the player repeats the roll, and if he obtains a score less than or equal to the number of strength points it has recovered up to that point, increased by one, it recovers another strength point, and he decides again whether to bring it into play. The maximum value that can be reached is the initial one.
Example: it is 09.30 (turn 6) of 12 April, and all three battalions of the 16th DBL have been eliminated and placed in the routed-units area. During the administrative phase of the turn, the French player rolls 1D6 for each of them, obtaining 1, 3 and 6.
The 1st Battalion recovers one strength point, while the other two do not. The French player decides not to bring the 1st Battalion back into play with 2 losses, but to wait until the following turn.
At the start of the 7th turn (10.00), the French player decides to remove Fornasy from the map to increase the chances of recovery of his units (7.2.2). In the administrative phase he rolls the dice again for the three battalions, obtaining 3, 5 and 1. The 3rd Battalion recovers a strength point naturally (it rolled 1), while the 1st recovers a second one thanks to Fornasy's bonus (-3 on the die). Nothing for the 2nd Battalion, which fails to recover.
Given the situation on the field, the French player decides to bring the 1st Battalion back into play, placing it, with one loss, in the hex of any divisional commander (Laharpe or Rampon), and to keep both Fornasy and the 3rd Battalion in the routed-units area.
Translator's note: the printed text gives the recovery modifier as "+4" in 7.2.2 but as "-3" in the 7.2 example, which is also described as a bonus. The sign is not consistent in the printed rules; both values are kept as printed.
7.2.1 Recovery of light units
Skirmishers that have been eliminated may be recovered individually, while for every light infantry (DBL), Grentz or Jäger tactical unit that recovers a strength point, one of the skirmisher counters possibly present in the routed-units area must be removed. Skirmishers recovered individually are placed back in play in the hex of their divisional commander.
Example: during the battle, the 1st Battalion of the 16th DBL was broken into skirmishers and placed in the routed-units area. If there are no skirmisher units in the routed-units area, the French player cannot roll dice to recover it.
During the following turn, a skirmisher counter is eliminated, and the French player may roll 1D6 to recover, specifying which of the two units he intends to recover. If he chooses the skirmisher and succeeds, it is placed back in play in the hex of General Laharpe. If he chooses to roll for the battalion and succeeds, it recovers one loss, but the skirmisher counter is removed from the routed-units area, so as to avoid creating new, non-existent strength points.
If General Laharpe is not in play, it is not permitted to recover skirmishers belonging to his division.
7.2.2 Officers and recovery rolls
Officers present in the recovery area of the routed CUs may use, as a modifier to the die roll, their command capability increased by one.
Example: if the colonels Rampon and Fornasy are in the French routed-units area, the recovery attempts for the units of the Laharpe division are modified by +4 (Fornasy's 2 rises to 3 and Rampon's 0 becomes 1), while those for the CUs of the other divisions have no modifier.
8.0 Engineers
During the command phase the player decides whether to use engineer units to move and fight or to carry out field works, by turning the counter to show the desired side. Engineer counters cannot be recovered during the game.
8.1 Engineers at work
During the administrative phase, place a field-works indicator in every hex containing engineer units. Engineer counters at work never fire, and they defend only in melee.
8.2 Field works
Each hex may contain only one prepared-position indicator.
CUs in hexes containing field works add 1D6 to their combat value, both for fire and for melee, while opponents subtract it, both for fire and for melee.
Scenarios
Scenario 1: 14 April 1796, Dego, the first day (12.00 – 17.00)
With the fall of the castle of Cosseria, the French left flank is protected. To outflank Savona and isolate the Austrian forces even further from the Piedmontese, Napoleon orders an attack on Dego, Argenteau's artillery depot. It is defended only by the battalions that fought at Montenotte and little else, but it is well protected by redoubts and entrenchments.
Rukavina, wounded at Montenotte, deployed the troops for defence while being treated by the divisional ambulance. Leaving for Acqui, he passed through Pareto, where he handed over command to Argenteau, recommending that he defend the stronghold of Dego. True to form, Argenteau managed to make a fresh mess by issuing orders with no regard for times and distances, to the point that the entire 25th Regiment remained at Sassello because, by then past midnight, he had ordered it to "reach Dego the following morning".
Setup notes: the numbers in brackets next to the commanders show their capability and command radius, while those next to the units show their initial fire/melee value.
Austrians (they deploy first, with formation and orientation at will)
- Castle of Dego (0713): Colonel Avogadro (1/2), initial order Defend; Grentz (4).
- Dego (0614/0714): 1 medium battery (4) at 0714; 1 regimental battery (2); 1 skirmisher company.
- Bric Rosso (0609): 1/Monferrato (3); 1 entrenchment.
- 0610: 1 entrenchment.
- Bric Rocchettino (0711): 1 entrenchment; 1/La Marina (3).
- Bric S. Lucia (0716): 1 regimental battery (2); 1 skirmisher company.
- Bric Casan (0811): 1 regimental battery (2); 2/La Marina (3).
- Magliani (0912): 1 regimental battery (2); 1/IR26 Schroeder (4).
- Costa (1013): 1 regimental battery (2); 1/IR16 Baron Terzy (3); 1 skirmisher company.
- Bric del Groppo (1011): 1 regimental battery (2); 3/IR50 Count Stain (3).
- Bric del Poggio (1112): 1 entrenchment; 1 regimental battery (2); 3/IR52 Hoch und Deutschmeister (4).
- Bric Sella (1312): 1 regimental battery (2); 1/IR49 Count Pellegrini (3); 1 skirmisher company.
- Chiaffaroni (1314): 1 regimental battery (2); 3/IR16 Baron Terzy (4).
Reinforcements:
- Turn 4 (13.30): enter from 1609 with a MANOEUVRE order: Colonel Provera (0/2); 2/Monferrato (3); 1/IR52 Hoch und Deutschmeister (4); 2/IR52 Hoch und Deutschmeister (4).
- Turn 9 (16.00): enter from 1609 with an order of the player's choice: General Argenteau (0/4); 1/IR19 Baron Alcvinzy (1); 1/IR50 Count Stain (3); 2/IR50 Count Stain (3).
French (they deploy second, with formation and orientation at will)
- Il Colletto (0318): Napoleon (4/8), initial order Attack; General Massena (0/5), initial order Manoeuvre; 1 medium battery (3).
- 0418: General Meynier (0/2), initial order Manoeuvre; 1/1 DBL (3); 2/1 DBL (3); 3/1 DBL (3).
- 0419: 1/3 DB (3); 2/3 DB (3); 3/3 DB (3).
- 0819: Colonel Rondeau (0/2); 1/100 DBL (3); 2/100 DBL (3); 3/100 DBL (3).
- Enter from 1419: General La Salcette (1/4), initial order Outflank: "Occupy and defend Cà Sodano (1306), passing through Girini (1612) and Bric Sodano (1508)"; 1/8 DBL (3); 2/8 DBL (3); 3/8 DBL (3).
- Enter from 0114: Colonel Rampon (0/2), initial order Manoeuvre; 1/16 DBL (3).
- Enter from 0115: General Laharpe (1/4); General Causse (1/4); initial order Manoeuvre; 1/70 DB (3); 2/70 DB (3); 3/70 DB (3); 1/99 DB (3); 2/99 DB (3); 3/99 DB (3); 22° Cacciatori a cavallo (1); 5° Dragoni (1); 1 medium battery (3).
Special rules
- Regroup: the Austrian player may not use the Regroup order (3.1.4). The French player may use it only for Napoleon.
- Outflank: the only Outflank order permitted in this game is the one assigned to La Salcette directly by Napoleon.
- CiC: until General Argenteau enters the map, the Austrian CiC is Colonel Avogadro.
- Activations: until at least one Austrian CU has been engaged in melee or has fired, the French player activates all his commands in the order he prefers, and last of all the Austrian player activates the Marquis of Avogadro. From the turn after an Austrian CU has taken part in a melee or fired on the enemy, activations proceed normally.
- Looting: each time a French CU enters a village hex not accompanied by a commander, it must check its morale, reduced for any losses. If it fails, it gives itself up to looting, and it can be recovered only if it is fired upon, or by a commander that begins its activation in the hex and that, rolling 1D6 and adding its tactical capability to the score obtained, obtains at least 4. The recovery attempt consumes the entire movement capability of both the commander and the CU. If attacked while looting, the French CU does not return fire and, if engaged in melee, rolls 1D6 regardless of its strength, while the attacker rolls double the dice it would normally roll. In both cases, once it has been engaged in melee or fired upon, the CU is considered recovered in Mob formation (5.1.7).
- Howitzers: the Dego battery has 7-pound howitzers. When it fires at a village, add 1 to each D6 rolled.
Victory conditions: the French player wins if, at the end of the battle (turn 21), there are no enemies on the eastern bank of the Bormida river and beyond the line of hexes between 0111 and 1603.
Scenario 2: 15 April 1796, Dego, the Austrians return (07.00 – 12.00)
In compliance with the orders received, General Vukassovich reached the vicinity of Dego shortly before dawn. Having met Lezeny with the remains of the division, and learned from him that the French, having abandoned themselves to looting, were completely disorganised, he decided to attack them. Croats and Piedmontese competed for the honour of attacking first, which Vukassovich granted to both.
Protected by a thick mist, the Austrians fell upon the picket posts of the French Grenadiers and Voltigeurs before their weapons, soaked by the rain that had lashed the greater part of the night, could be fired, and cut them to pieces before they could raise the alarm. The hunt for the French then began. They were flushed out house by house and driven back as far as Dego, where the artillery lost the previous day was recaptured. By noon, all the positions occupied the previous day by the Austro-Piedmontese troops had been retaken, and the French were in flight.
Special rules
- Looting: all the French CUs have spent the previous 12 hours looting and drinking, and are therefore not in a condition to fight. Place the appropriate indicator on them and treat them as described in scenario 1.
- Artillery: the regimental artillery captured the previous day was awaiting draught animals, and the French had no trained personnel to use it, therefore:
- French player: the artillery may be moved only 1 hex per activation, by infantry or skirmisher units, and may not fire.
- Austrian player: the batteries are recaptured by bringing a CU into the hex. From the following activation, the guns may be moved, not limbered but without needing a CU in the same hex, and may fire normally.
- Austrian surprise: the French player may not place the activation markers in the container until the Austrian player has engaged a French CU in melee or fired at it.
Austrians
- CiC: Colonel Vukassovich (1/4), initial order Attack; 1/IR25 Count Brechainville (4); 2/IR25 Count Brechainville (4); 3/IR25 Count Brechainville (4).
- Enter from 1401 with an Attack order: Colonel Kukurina (1/2), initial order Attack; 3/IR24 Baron von Preiss (4); 1/IR32 Gyulaj (4).
- Colonel Liptay (1/2), initial order Attack: 2/IR19 Baron Alcvinzy (4); 1/IR39 Baron Nadasdy (4); 2/IR60 Count Liccaner (4); 2/IR24 Baron Preiss (4).
French
- Castle of Dego (0713): CiC La Salcette, initial order Defend; 3/3 DB.
- Dego (0613): 3 regimental batteries; 1/8 DBL.
- Dego (0614): 3 regimental batteries; 2/8 DBL.
- Dego (0613/0614/0714): 3 regimental batteries; 3/8 DBL.
- Piano (0411): 1/3 DB.
- Piano (0511): 2/3 DB.
- Cà Sodano (1305): Colonel Rondeau (0/2), initial order Defend; 1/1 DB.
- Cà Sodano (1306): 2/1 DB.
- Cà Sodano (1406): 3/1 DB.
- Costa (0813): General Meynier (0/2), initial order Defend; 1/100 DB.
- Magliani (0912): 2/100 DB.
- Magliani (1304): 3/100 DB.
Victory conditions: count the built-up hexes controlled by the Austrian player and add the number of batteries he has recaptured:
- 0 to 5: French triumph.
- 6 to 8: French victory.
- 9 to 11: draw.
- 12 to 15: Austrian victory.
- More than 15: Austrian triumph.
Scenario 3: 15 April 1796, Dego, the French counteroffensive (13.00 – 17.00)
When it became clear that the recapture of Dego was an isolated action, carried out by a few thousand men, Napoleon ordered an assault similar to that of the previous day, with part of the units that had withdrawn from the battlefield the previous evening.
The tenacity of the imperial troops was extraordinary. Not only did they withstand the French assault, killing the general leading it (Causse), but Lezeny and his men counterattacked with the bayonet through the houses of Piano, forcing the French to fall back. Only at 4 in the afternoon did the 8th light DB break the situation, outflanking the redoubts of Poggio and Sella and cutting the main defensive line exactly between Magliani and the Groppo. Vukassovich immediately understood that the delicate balance of his defensive deployment was about to collapse, and ordered a retreat, which was carried out in good order by stages along the escape route to the north, allowing almost all the units to reach the Langa road towards Pareto. (The chronicles report that they even managed to bring along several hundred prisoners and a battery of guns.)
Special rules
- Activations: during the first turn, the French player activates all his commanders in the order he prefers; only then may the Austrian player activate Vukassovich. From the second turn on, activations proceed normally.
- Massena's division: at the start of the game, the French player rolls 1D6 for each CU of Massena's division, assigning it losses equal to the result of the roll. If the losses are greater than or equal to the value of the CU, it starts the game in the recovery area. General Massena starts the game in the recovery area and may bring the CUs eliminated back into play only by regiment: he leaves the recovery area and places himself at the head of the first regiment of his division that enters the map.
- French CiC: when Massena enters play, the role of CiC passes from Laharpe to Massena.
- Austrian artillery: the batteries may not move limbered.
Austrians
- CiC: Colonel Vukassovich (1/4), initial order Defend; 1/IR25 Count Brechainville (4); 2/IR25 Count Brechainville (4); 3/IR25 Count Brechainville (4); 1 regimental battery (2).
- Colonel Kukurina (1/2), initial order Defend: 3/IR24 Baron von Preiss (4); 1/IR32 Gyulaj (4); 1 regimental battery (2).
- Colonel Liptay (1/2), initial order Defend: 2/IR19 Baron Alcvinzy (4); 1/IR39 Baron Nadasdy (4); 2/IR60 Count Liccaner (4); 2/IR24 Baron Preiss (4); 1 regimental battery (2).
French
- Enter from 0219: CiC General Laharpe (1/4), initial order Attack; 1 medium battery (3); 1/16 DBL (3).
- Turn 2 (13.30): General Causse (1/4), initial order Attack; 1/70 DB (3); 2/70 DB (3); 3/70 DB (3).
- Turn 3 (14.00): Colonel Rampon (0/2), initial order Attack; 1/99 DB (3); 2/99 DB (3); 3/99 DB (3).
Victory conditions: the French player wins if, at the end of the battle (turn 21), there are no enemy CUs on the left bank of the Bormida river and beyond the line of hexes between 0111 and 1603.
Scenario 4: 15 April 1796, Dego, the second day (07.00 – 17.00)
This scenario combines scenarios 2 and 3. Use the set-up of scenario 2 and the French reinforcements as in scenario 3.
Special rules
- Where is Massena? Massena begins the game off the map. From the administrative phase in which the first CU of his division is eliminated, the French player rolls 1D6. If he obtains a 6, Massena is placed in the recovery area and may begin the recovery rolls for the eliminated CUs (in this first recovery turn, without using his command capability as a modifier). While Massena has not been "found" and placed in the recovery area, the CUs of his division cannot be recovered. If the French player brings an off-map commander, that commander may add its command capability to the die roll for "finding" Massena.
Victory conditions: as for scenario 3.
Hypothetical scenarios
Hypothetical scenarios may be played to balance the scenarios according to the abilities and experience of the players, or to simulate "what might have happened if...". The number indicates the scenario to which the hypothetical situation refers, while the letter distinguishes it. They may be added singly or in more than one, after choosing them from among those carrying the number of the chosen scenario.
Scenario 1A: Argenteau learns to write!
The likeable Austrian character learns to issue clear and precise orders.
Set-up: both players set up as in scenario 1 and use the special rules provided for it, but the Austrian player may add:
- Castle of Dego (0713): CiC General Argenteau (0/4), initial order Defend.
- Within 5 hexes of the castle: 1/IR19 Baron Alcvinzy (1); 1/IR50 Count Stain (3); 2/IR50 Count Stain (3).
Austrian reinforcements:
- Turn 1 (12.00): enter from 1609 with a Manoeuvre order: Colonel Provera (0/2); 2/Monferrato (2); 1/IR52 Hoch und Deutschmeister (4); 2/IR52 Hoch und Deutschmeister (4).
- Turn 5 (14.00): enter from 1609 with a Manoeuvre order: Colonel Vukassovich (1/2), initial order Manoeuvre; 1/IR25 Count Brechainville (4); 2/IR25 Count Brechainville (4); 3/IR25 Count Brechainville (4).
The battle ends at 20.00.
Victory conditions: as for scenario 1.
Scenario 1B: Prepared defence
The Austrian player may place the four entrenchments and the engineer counter in any unbuilt or wooded hex of the map.
The battle ends at 18.00.
Scenario 1C: Festung Dego
Play scenario 1 with both of the previous variants (1A and 1B).
The battle ends at 21.00.
Scenario 1D: Ecce Homo! (What if you had been in command?)
The Austrian player deploys the initial troops, the reinforcements and the entrenchments of scenario 1 in any hex between the line xx01 and the line xx15 inclusive. In addition, at turn 7 (10.00):
- Enter from 1609: Colonel Vukassovich (1/2), initial order Manoeuvre; 1/IR25 Count Brechainville (4); 2/IR25 Count Brechainville (4); 3/IR25 Count Brechainville (4).
Glossary
- CC: Senior Commanders (corps/wing).
- CiC: Commanders-in-Chief.
- CO: Operational Commanders (division/column).
- CS: Subordinate Commanders (brigade/regiment).
- CU: Combat units (infantry/cavalry).
- Hex: hexagon.
Translator's note: the abbreviations PM (movement points), D6 (six-sided die), DB and DBL (demi-brigade and light demi-brigade, the "Demì Brigade" of the Italian text), and IR (Infanterie Regiment) are used in the printed rules without definition; the expansions given here are the translator's.