RulesPal
Chat
Rulebook
Dark Age: 2017 Master Rules thumbnail

Dark Age: 2017 Master Rules

Dark Age: 2017 Master Rules Rulebook

Table of Contents

Table of Contents

  • Concepts & Essentials
    • Battlefield
    • Dark Age Miniatures
    • Measuring Device
    • 20-Sided Dice
    • Terrain
    • Counters and Tokens
    • Templates
  • The Factions of Dark Age
  • Online Updates & Rules Maintenance
  • Models
  • Term Definitions
  • Getting Started
    • Determine Point Level
    • Create Force
    • Choose Scenario
    • Battlefield Set Up
    • Deployment
  • Measuring & Directions
    • Using Templates for Measuring
    • Models When Pre-Measuring
    • Directions on the Battlefield
  • The Game Round
    • Preparation Phase
    • Initiative Phase
    • Activation Phase
    • Lingering Effects Phase
  • Elements of Play
    • Activating, Action Points, & Actions
    • May Not Activate
    • Sequence of Actions
    • Line of Sight
    • Movement
    • Stat Check
    • Prone
    • Squadlink – Multiple Models as One Activation
    • Holding an Action
  • Attacks
    • How to Make an Attack
    • Selective Fire Assault Groups
    • Melee Attack Special Rules
    • Ranged Attack Special Rules
    • Cover
    • Template Attacks
  • Panic, Damage, & Dying
    • Panic
    • Losing Multiple HP
    • Dying
  • Psychogenics
  • Battlefield Terrain
    • Terrain Keywords
    • Terrain Examples
    • Complex Terrain Features
  • Special Abilities
  • Weapon Abilities
  • Tournament Play & Game Scenarios
    • Force List Composition
    • Prepare Secondary Objective Decks and Objective Markers
    • Tournament Format
    • Being "Tabled" or Scoring a Forfeit
    • Setting Up the First Round's Game
    • Objective Rules
    • Scenario 1: Reconnaissance
    • Scenario 2: Unexpected Engagement
    • Scenario 3: Burying the Dead
    • Scenario 4: Duel of Champions
    • Scenario 5: Ancient & Bloody Wasteland
  • Secondary Objectives
    • Rules for Scoring Secondary Objectives
    • 2017 Secondary Objective Card Master Rules List
  • Templates

Concepts & Essentials

Battlefield

Dark Age is played on a 48" x 48" level area (table top, section of floor, etc.) called the battlefield.

Dark Age Miniatures

To play the game, each player needs a number of miniatures from the Dark Age product range to represent your Force on the battlefield.

Measuring Device

Dark Age uses inches for its measurements, requiring you to have at least one tape measure or other standard measuring device on hand during the game. Measure all distances listed in Dark Age in inches.

20-Sided Dice

Dark Age uses 20-sided dice, abbreviated as "d20." We recommend having d20s of different colors (at least three) to make different rolls easier to distinguish and speed up game play.

Terrain

Dark Age makes liberal use of terrain. See the Terrain Features section of this book for more information.

Counters and Tokens

Dark Age uses various counters and tokens to represent specific effects that take place during a game. Glass beads, plastic markers, and a variety of commercially available products can be used to indicate which miniatures bear which effects, etc. There are some stand-in counters that can be photocopied and cut out for your use at the end of this book.

Templates

Some weapons and game elements in Dark Age require the use of specific templates during game play. While there are commercially available templates, we have included versions at the end of this book to be photocopied and cut out for your use.

The Factions of Dark Age

There are several distinct groups amongst the populations, species, and cultures of Samaria. These greater groups are the Factions from which players choose their forces, many of which contain sub-factions within them. The book details the eight currently known Factions of Samaria: the Forsaken, the Outcasts, the Bounty Hunters, the Dragyri, the Skarrd, the Brood, the C.O.R.E., and the Kukulkani. Each faction section gives narrative background only.

For the specific game rules involved with each of these factions, players should see the Faction Documents found on www.dark-age.com as well as within the various expansion publications available for Dark Age. These are all available for download at WWW.DARK-AGE.COM.

Online Updates & Rules Maintenance

To maintain a healthy balance in every element of Dark Age, from models to rules, we undertake constant playtesting and observation of the game in action. When we see imbalance or confusion, we release occasional rules updates online. These include rules errata, answers to frequently asked questions (FAQs), or adjustments to certain models' statistics or abilities.

Sometimes an updated or re-sculpted miniature will be released that is already represented in the Dark Age range. This does NOT invalidate the use of older miniatures; it merely gives new and potentially more attractive options to miniature collectors and players.

Always check to make sure both you and your opponent are using the most current or updated rules for your models by checking the version number at the bottom of the card or rules document. In the case of older miniatures being used, please inform your opponent of any miniatures in question.

For the specific game rules involved with each of these factions, players should see the Faction Documents found on www.dark-age.com as well as within the various expansion publications available for Dark Age. These are all available for download at WWW.DARK-AGE.COM.

Models

Each unit in Dark Age is represented by a miniature as well as an associated Stat Card, which displays the model's unique statistics and abilities.

  1. Model Name: This displays the model's name; used to determine when a rule or effect includes this model. It should be noted that if a model has (LE) in its Model Name, it counts for all purposes as having the Model Name of the non-LE version it is based off of. For example, the Scarlet Greater Fire Elemental (LE) counts for ALL purposes as a normal Greater Fire Elemental.

  2. Action Points (AP): Action Points represent the number of actions a model can perform during its activation. Almost everything a model does – from moving, attacking, or using other abilities – requires the expenditure of AP.

  3. Defense (DF): A model's Defense represents its ability to avoid an attack. The higher this number is, the easier it is to hit the model.

  4. Armor (AR): Armor is the amount of protection a model has against physical damage otherwise leading to a loss of HP.

  5. Movement (MV): A model's Movement represents its raw swiftness and ability to cross distances on the battlefield.

  6. Psych (PS): A model's Psych indicates its overall bravery, mental fortitude, and willpower. Psych is also used as a model's defense against certain Psychogenics and Special Abilities.

  7. Hit Points (HP): A model's Hit Points is its overall health and physical vitality. When a model is reduced to 0 Hit Points, it is killed and removed from the battlefield (unless told to do otherwise by other game effects).

  8. Assault Group (AG): The various types of attacks a model can perform. If a specific attack has any, its Weapon Abilities will be listed under each type. For more on Weapon Abilities, see the relevant section later in this book.

Term Definitions

Before going further into the rules of game play, here is a useful list of common terms you will see referenced throughout this book:

ACTIVE MODEL: This term refers to the model currently spending action points at the moment in question.

CHARACTER: This term refers to unique personalities and models that are noteworthy enough to have an availability of "C".

CHARGE: This is a specialized action that moves a model into the range of one of its melee attacks with a target, and gains a free AP to immediately attack with the chosen melee attack. Any game effect that is "can result in a charge" or similar wording also generates this free AP for attack and is considered a Charge for all other bonuses/penalties.

COMES/MOVES WITHIN RANGE: (Added by the April 2018 Errata, to the list of terms defined.) Wherever game rules refer to or are triggered by an enemy model coming or moving into range, this refers to an enemy model moving or being moved within the range in question, whether or not they began outside the range or not.

CRITICAL AR SUCCESS AND FAILURE: When models make AR Saves, a result of 1 indicates a Critical AR Success and a result of 20 indicates a Critical AR Failure. A critical success means the model passes the check, regardless of the Target Number, and can override a critical failure. A critical failure means the model fails the check, regardless of the Target Number, and the model suffers an additional 1 HP from the attack.

CRITICAL HIT: Rolling a 1 on an attack roll is a critical hit. A critical hit means the target may not roll any defensive Special Abilities, receives no AR Save against the attack, and all Weapon Abilities requiring a die roll versus a Target Number automatically succeed.

CRITICAL FAILURE: Rolling a 20 on an attack roll is a critical failure. A critical failure, in addition to missing the target and possibly causing a Malfunction, costs the attacking model an additional AP this activation (if the model has any remaining).

DEPLOY/DEPLOYMENT: To deploy a model is to place it on the battlefield.

DIE ROLLS: Dark Age uses a d20 for all game determinations. With the Dark Age Target Number system, rolling lower is better than rolling higher in all cases.

DISREGARD: When an ability or effect calls for a die roll to be disregarded, the result of that roll is ignored. Should an ability or attack be disregarded, it is ignored completely and cannot affect objects on the battlefield. Disregarded attacks still count against an attack's Rate of Fire.

ENGAGED: A model is Engaged when it is in base contact with an enemy model.

FACTION: An army's Faction is the greater group from which a Force is drawn from.

FAILURE: When the result on a die roll is greater than its Target Number, that roll is a failure.

FORCE: A Force is the total pool of models a player selects for a game of Dark Age.

HEAL: When a model is healed, it regains one or more HP that have been previously lost.

HIT: When an attack roll has succeeded and the target's defensive Special Abilities (if they possess any) have failed, it is known as having "Hit." Several game effects may cause "automatic hits." In the case of automatic hits, it is considered to have automatically succeeded in its Target Number to hit the model in question.

KILLED: When a model is reduced to 0 HP it is killed and removed from play. There are several Special Abilities and game effects that trigger when a model has been reduced to 0 HP, and these must be acknowledged and resolved before the model is physically removed from play.

MANDATORY ACTION/ABILITY: This term is used to describe any weapon ability, special ability, or game effect that is not optional. These will most often be recognizable by their effects being "automatic" and their descriptions lacking the phrase "The/this/a model may…" When these kinds of actions or abilities are triggered, they automatically take place.

MODEL: A model is the term used for a single based miniature on the battlefield.

OPTIONAL ACTION/ABILITY: This term is used to describe any weapon ability, special ability, or game effect that is not mandatory, and only triggers if the model's owner in question wishes it so. These will most often be recognizable by their effect descriptions having the phrase "The/this/a model may…", and lacking terms or phrases like "automatically" and "The/this/a model must…" When these kinds of actions or abilities are triggered, they take place only if the owning player chooses to do so.

OWNER: This term indicates the player that included the model in question in his or her Force at the time of its Deployment.

RE-ROLL: Sometimes an effect will call for a "re-roll." When this occurs, disregard the first result and roll the die/dice again. A die may never be re-rolled more than once. In the case where multiple players have the option to re-roll the same die roll, the owner of the active model may choose to do so first.

RESOLUTION ROLL: There might be times during a game of Dark Age where players cannot determine a clear course of action or resolution from the rules as written. In this case a Resolution Roll is a quick way to keep the instance from bringing the game to a halt. Both players roll a single d20 and the player rolling the lower result "wins" the roll and applies his or her desired outcome to the situation.

ROUND: Dark Age is played over a series of rounds, each divided into four phases.

SCATTER ROLL: A Scatter Roll is used to determine the direction an attack or effect deviates from its intended point of contact. Each side of a standard d20 is a triangle shape. When called for, a single d20 is rolled near the intended point of contact (to avoid angle discrepancies). The attack or effect scatters in the direction indicated by the topmost (by the orientation of the number on the die) point of this triangle a number of inches determined by the specific effect calling for the Scatter Roll.

SUCCESS: When the result on a die roll is equal to or lower than its Target Number, that roll is a success.

TARGET NUMBER (TN): The number needed for a successful outcome on any die roll is that roll's Target Number, or TN.

Getting Started

Before playing a game of Dark Age, the players need to decide the type of game they wish to play. This includes things like point level, scenario type, and concentration of terrain.

Determine Point Level

The first step is to decide the maximum number of points available to each player's Force. Greater point levels create larger-sized conflicts, while lower point levels allow for quicker, more brutal matches. The recommended point levels for Dark Age are 500 as a standard game, 750 for a more "battle" feel, and 1000 points for an all-out war on the tabletop.

Create Force

Next, players choose the makeup of their individual Forces up to the agreed-upon Point Level. First, players determine which Faction they will play. A player's Force will use that Faction's rules and models to build their Force.

To include a model in a Force, note its associated Point Value as well as Availability, listed on its Stat Card. A model's Point Value indicates how much of a Force's total points are required to field the model. Availability is how many of that Model Name that you can include per specific Point Level.

Example 500 Point Force

  • 1x Warwind [PV:100] = 100
  • 1x Deacon [PV:75] = 75
  • 2x Strikes [PV:75] = 150
  • 3x Coils [PV:50] = 150
  • 1x Flock [PV:25] = 25

Total: 500/500

Example 750 Point Force

  • 1x Luck'kit'kaii, Arbiter of Fate [PV:200] = 200
  • 1x Dah'vid, The Arctic Wind [PV:100] = 100
  • 1x Frostbite [PV:100] = 100
  • 1x Soul Splitter [PV:75] = 150
  • 2x Hail Kin [PV:50] = 100
  • 4x Spear Slaves [PV:25] = 100

Total: 750/750

Note: the printed example lists 1x Soul Splitter at PV:75 with a total of 150 points; the total of 750 is as printed.

Example 1000 Point Force

  • 1x L1ghtbr1nger, The Never Angel [PV:150] = 150
  • 1x Centurion, War Host Alpha [PV:150] = 150
  • 1x Churgeon [PV:150] = 150
  • 1x DRG-Y [PV:100] = 100
  • 1x Ghost [PV:75] = 75
  • 2x Legionaries [PV:75] = 150
  • 1x Titan Menial [PV:75] = 75
  • 2x Infiltrators [PV:50] = 100
  • 2x Menial Bots [PV:25] = 50

Total: 1000/1000

Choose Scenario

Players should then agree or randomly determine a scenario they are going to play (See the Scenarios section). Scenarios determine Deployment Zones, Victory Conditions, and other set-up rules. Note that additional Scenarios, complete with new Victory Conditions, are available in the March to Immortality Document found online.

Battlefield Set Up

A large component of any tabletop miniatures game is the battlefield. Dark Age is played on a 48" x 48" area with enough terrain to cover at least 50% of the board. Once enough terrain is selected, both players (or an Event Organizer) should determine the keywords for each terrain piece or feature (See the Battlefield Terrain section).

Players (or an Event Organizer) then take turns placing each terrain piece anywhere they choose until all pieces are on the battlefield.

The printed diagram shows the standard layout: a Deployment Zone on each of two opposite edges with No Man's Land between them, dimensioned 12 in, 8 in and 4 ft.

Deployment

Players deploy their models in their Deployment Zone, as outlined in the chosen scenario. After establishing Deployment Zones, each player rolls a d20. The player with the lowest result chooses either to deploy all of their models with a particular Model Name, or to force another player to deploy all of his or her models of a selected Model Name. Once that is done, the player with the next lowest result chooses a Model Name in their own force and does the same.

Players take turns in this fashion, from lowest to highest dice results, deploying all models with chosen Model Names in their own forces until all models (barring Special Abilities) are on the battlefield.

It should be noted that some models in the game have similar Model Names, such as a type of unit and their associated leader (Bane, Bane Leader, Firestorm, Firestorm Leader, etc.), but these are still considered DIFFERENT Model Names for deployment purposes. Only (LE) versions of a model are counted as having the same Model Name; no other Model Name variations work like this unless specifically noted to do so.

There are some special abilities that allow models to be deployed after normal deployment, or even later during the game. In the case that multiple players have models that deploy at the same noted time (Infiltrate, Ambush, etc.), a common Resolution Roll should be used to determine who chooses the order of this special deployment. All other rules for deployment should be followed, taking into consideration the wording of that special deployment ability or effect.

Once deployment ends, Round 1 of the game begins.

Measuring & Directions

Using Templates for Measuring

There might be times when a Range or area needs to be measured through the use of a specific Template. In the case where this is needed, the template in question can be placed on the table and such to simulate its use and "measure" its effect upon the tabletop.

Models When Pre-Measuring

There is really only one rule when taking the ability to pre-measure distances or use templates to judge effectiveness – DO NOT move a model on the tabletop unless that model is supposed to be moved. Mistakes happen, and this can lead to erroneous placement of models.

Directions on the Battlefield

TOWARD: Sometimes an effect will call for moving or measuring toward a model or point. When this occurs, the model or template cannot end that movement further away from that model or point than it began.

DIRECTLY TOWARD: Sometimes an effect will call for moving or measuring directly toward a model or point. When needed, draw a line from the center of the model's base through the center of the targeted model or point. The model must move along that line as far as its movement allows, stopping only if it comes in contact with another model or a terrain feature it cannot move through.

AWAY: Sometimes an effect will call for moving or measuring toward a model or point. When this occurs, the model or template cannot end that movement closer to that model or point than it began.

DIRECTLY AWAY: Sometimes an effect will call for moving or measuring directly away from a model or point. When needed, draw a line from the center of the targeted model's base through the center of the affected model's base and beyond it. The affected model must move along that line as far as the necessary movement allows, stopping only if it comes in contact with another model or a terrain feature it cannot move through.

All measurements in Dark Age are in inches ("). A player may measure any distance at any time. When measuring the distance between two objects, always measure from the closest points between the two objects, and always from the edge of the base of a model.

The Game Round

The game round is divided into the following phases:

  • Preparation Phase
  • Initiative Phase
  • Activation Phase
  • Lingering Effects Phase

Once these four phases are undertaken in order, the game round ends and a new one should begin.

Preparation Phase

Many special rules or game effects trigger or come into play during the Preparation Phase. These will be noted in their descriptions, but players should take note if their models possess any.

  • During the Preparation Phase, both players draw Secondary Objective Cards until they have two cards.

Initiative Phase

Initiative indicates the order in which players make their models' activations. Players determine this order by rolling a single d20, adding their respective current Victory Point totals, and comparing the results. The player with the lower final result chooses either to activate one of his models, or selects one of his opponent's models that his opponent must then begin an activation with first. Re-roll all ties.

Activation Phase

During this phase, play passes from player to player in Initiative order (from lowest to highest), with each player activating a single model (potentially then deciding to nominate a Squadlink based on the chosen model). A model may only activate once each round. If a player has no models left to activate, play passes to the next player in Initiative order that still has models left to activate. This repeats until all models on the battlefield have activated.

All models MUST activate each round if possible.

Lingering Effects Phase

Many special abilities or game effects come into play during the Lingering Effects Phase. These will be noted in their various descriptions.

  • Each player may discard ONE of their unfulfilled Secondary Objective Cards.

Once all lingering effects are resolved, the players take a moment to see if anyone has achieved Victory (based on the scenario). If Victory was not achieved and there are still game rounds left to play in the game, the current game round ends and a new one begins.

Elements of Play

Within the Dark Age miniatures game there are a variety of rules that govern certain aspects of how the miniatures interact with one another, but some stand out as primary. During the course of a game, miniatures will find themselves subjected to these rules and situations the most - making them something that every player needs to know as the spinal cord of the Dark Age body of rules.

Activating, Action Points, & Actions

Action Points (AP) indicate the number of actions a model can perform during its activation. A model may spend AP on a variety of actions such as moving, charging, using attacks, abilities, casting Psychogenics, and so forth, in any order the player chooses.

For example, a model with three AP could spend one AP on movement to move up to an objective, spend one AP to attack it, and then spend one AP to move again.

Once a model has used all of its available AP, its activation ends. A model is not FORCED to spend all of its AP unless another rule or game effect says so. Any unused AP are lost at the end of model's activation.

May Not Activate

There can be moments in a game of Dark Age that could result in a model being under an effect where it "may not activate." When this is the case, the model does not activate as normal, does not generate any AP, and cannot choose to trigger any of its Optional special or weapon abilities (Parry, Reaction Strike, etc.) until it is out of this state, although Mandatory abilities (Explosive End, Regeneration, etc.) still automatically happen as normal.

Sequence of Actions

If, during the course of a game, two or more abilities or actions of models controlled by opposing players would happen effectively simultaneously, the following is a Sequence of Actions that show what takes precedence:

  1. Active Model's Mandatory Actions/Abilities
  2. Other Model's Mandatory Actions/Abilities
  3. Active Model's Optional Actions/Abilities
  4. Other Model's Optional Actions/Abilities

If two or more actions or abilities still fall under the same point on the Sequence of Actions, the model's owning player may choose the order in which they are resolved.

Line of Sight

The Line of Sight (LoS) rules determine if one model can see an object or model, and determines if a terrain piece or other model lying between them hinders that vision in some fashion.

To determine LoS, select two objects. The first, that which you are checking line of sight for, is the Viewer. The second, the object you want to confirm that the viewer can see (and to what degree), is the Target. Once you have selected this object, draw an imaginary line connecting the left side of the Viewer's base to the left side of the Target's base, and then do the same for the right side. This defines the Line of Sight window.

If an unobstructed straight line can be traced from anywhere on the Viewer's base within the Line of Sight window to anywhere on the Target's base, the Target is considered to be within Line of Sight. If all lines drawn within the Line of Sight window cross terrain or models the same Size or larger than the Target, Line of Sight is automatically blocked.

The printed page illustrates Line of Sight with Medium, Large, and Huge models and a Large-sized wall, showing which lines are obstructed.

Movement

A model may spend AP to move on the battlefield. For each AP spent on movement, a model may move up to its MV value in inches. There are several different methods a model in which a model may choose to move as well as modifiers to that movement. The most common examples of movement types and modifiers are as follows:

Movement Penalties: Movement penalties represent certain effects that slow or hinder a model, costing it some of its movement distance. Movement penalties can never reduce a model's movement distance per AP spent to less than 1" unless the model's actual MV value has been reduced to 0 by game effects. See the Terrain Features and Special and Weapon Abilities sections for more information.

Charging: Charging is a type of movement action that results in the moving model coming into range of an enemy target with one of its melee attacks. When a Charge is successful the charging model automatically gains 1 AP to be immediately spent on a melee attack in range of the model(s) charged at the end of that movement. A model may not Charge the same target more than once in a given activation.

Breaking Free: Once a model is engaged with an enemy model, it may not voluntarily move away from that model unless it chooses to Break Free. To Break Free, a model must spend 2 AP. It then moves its MV value as normal, but may not Charge or otherwise engage another model during this activation.

Moving Past Models: A model may move through friendly models of the same or smaller Size when moving, but never through enemy models. Models may never end a movement action with their base overlapping another model's base.

Climbing: Some terrain features have different levels, and means to climb between those levels. In order to climb terrain, a model must be in base contact with a terrain feature with the Climbable keyword. The model may move between these levels of that terrain feature by spending 1 AP on movement per level up or down the terrain feature. When placing the model on the terrain feature, put it on the closest point to where the model began climbing before any further AP are spent to continue changing levels or move upon a current level. A model that does not have enough room to place that model's base upon the target level cannot climb that terrain feature.

Jumping: There will be instances where a model may wish to jump over a short open distance or over a dangerous piece of terrain. To jump a model must spend 1 additional AP when taking a move action. While jumping a model ignores the Dangerous and Rough terrain keywords of any terrain it crosses. A jump must be in a straight line. If a model is jumping over an open distance, it can only do so if it begins the jump touching one side of the gap (like the gap between walkways or over a thin crevasse), the distance must be equal to or less than the model's movement, and the model is placed on the opposite side of the open distance after jumping – any additional movement distance is forfeited.

Falling: A model whose base is moved by some kind of game effect completely off a level of terrain (Pull, Knockback, etc.) falls down. The model will suffer an automatic PW 5 hit for each level it fell that cannot be discarded. The fallen model is automatically prone upon landing, and placed on the lowest level directly under the point where the model left (or was forced off) its elevated position. If a model happens to fall in a way that its base overlaps another model's base, both models suffer the automatic hit(s), are placed so both model's bases touch at the point of impact, and are made prone.

Stat Check

Sometimes an ability or game effect will call for a model to make a Stat Check, such as an AS Check or PS Check. To make a Stat Check, roll a d20. The roll succeeds if the result is equal to or less than the highest value of that stat on the model's Stat Card (after any modifiers). The roll fails if the result is instead greater than this number.

Prone

There are many ways for models to become Prone in Dark Age, representing a momentary complete loss of footing and control of their center of gravity. Whether it is due to special abilities, weapon abilities, or other game effects, once Prone the following rules apply:

Prone Models

  • A prone model's MV value is reduced by ½, rounding up to the next whole number, before any other modifiers.
  • A prone model may not Charge, Climb or Jump.
  • Non-template Ranged attacks against a prone model suffer a -2 AS penalty.
  • Melee attacks against a prone model gain a +2 AS bonus.
  • A prone model suffers a -2 penalty to their AS values.
  • A prone model is considered to be one Size smaller for Line of Sight and movement purposes.

A prone model may automatically stand up in place, removing the Prone status, by spending 1 AP during its activation.

Squadlink – Multiple Models as One Activation

Some models have trained to coordinate with their comrades and are adept at working in concert with each other instead of acting on their own in battle. Squadlink is listed as a keyword (x) and a number value (y). When a model with a listed Squadlink is chosen to be the first model to activate, a number of additional friendly models within 4" of the chosen model may activate as well. The total number of activating models cannot exceed the highest value for (y) listed for the models chosen in the Squadlink.

Each model you wish to activate as part of a Squadlink must share at least one (x) keyword with all other models in the Squadlink. The exception to this is models with the Commander special ability. As models with this ability are considered to have all friendly Squadlink keywords, they can participate in any Squadlink available to them – as long as there is at least one model in the Squadlink with a keyword for them to choose for their activation.

Resolve each individual Squadlinked model's full activation, starting with the initial model chosen, before choosing another model in the Squadlink to activate, continuing until all models chosen for the Squadlink have activated.

Example: Yovanka (L1) is chosen to activate and decides to Squadlink with some nearby Squalls (M1, M2, M3, and M4). Yovanka chooses "Elemental" as the keyword for the Squadlink, and then measures ranges to who can join her. Her Commander*(5) Squadlink would allow her to choose everyone, but only (M1) and (M3) are within 4" of her. (M2) and (M4) are unfortunately too far away for this Squadlink.

Holding an Action

Unengaged models may spend their last 2 AP to go On Hold. A model On Hold is waiting to react to specific enemy actions, such as dodging ranged attacks or waiting until an enemy is close enough to attack. A model is On Hold until it chooses to use its held action or until it next activates. While On Hold, a model can take the following special actions:

Ranged Attacks: When an enemy model activates, performs actions, or has any amount of movement pass within range of an On Hold model's Ranged Attacks, the On Hold model may immediately perform that Ranged Attack Action targeting the active model, exactly as it would during its own activation. (First sentence as corrected by the April 2018 Errata, page 39; the printed sentence read: "When an enemy model moves into or activates while within range of an On Hold model's Ranged Attacks, the On Hold model may immediately perform that Ranged Attack Action targeting the active model, exactly as it would during its activation.") This may be done at any point during the target model's move, effectively interrupting it with an attack before, during, or after its resolution. The model performing the On Hold Ranged Attack merely has to state its intention to do so and the target pauses until it is carried out. This type of On Hold action includes Ranged Attack profiles gained from Psychogenics, Upgrades, Bio-Gens, etc. Melee Attacks: When an enemy engages an On Hold model, the On Hold model may attempt to attack that enemy before the enemy resolves any Charge Attack it might perform. To do so, both players should roll a d20 and add their model's DF Value. If the On Hold model rolled lower, it may perform a melee Attack Action, exactly as it would during its activation. If the charging model rolled lower, the On Hold model may still perform an Attack Action, but it will be resolved only after the Charge Attack from the enemy model (assuming the On Hold model survives!).

Melee Attacks with RN Reach or Arc: If the On Hold model has a melee attack with a RN of Reach or Arc, it may attempt to perform this attack on an enemy that comes within 2" of it. If the enemy model intends charging the On Hold model, resolve it exactly as other melee attacks above, with the enemy model moving into contact and performing its Charge Attack before resolving the On Hold model's attack if it should roll lower on the d20. If the enemy model is merely moving within 2" of the On Hold model but does not intend to Charge it, then the On Hold model may immediately perform a Melee Attack Action on the enemy model as it passes by. The model performing the On Hold Reach or Arc Attack merely has to state its intention to do so and the target pauses until it is carried out.

Evade: When an On Hold model is targeted by a ranged attack or affected by a template attack, it may make a PS Check. If that check succeeds, the model may move up to its MV value before the attack roll is made, using its new location to determine Line of Sight, range, and cover. If the model moves out from under a template, the model is automatically missed, but if it was the target of the template attack its original location is still used to determine placement of the template and an attack roll is still made to check for malfunction. If the target of a non-template attack moves out of line of sight or range from the attack, the attack may choose a new valid target for the attack.

Other Actions: Note that sometimes a model will have a special ability that allows it to perform other actions while On Hold. These will be listed and explained on that model's Stat Card. If no trigger moment is listed on this action, it may be performed at any point during an enemy model's activation, effectively before or after (but not during) any expenditure of AP.

Attacks

Attacks in Dark Age come in two varieties – Ranged Attacks and Melee Attacks. Each requires a successful attack roll to hit the target(s). Each type of attack has its own special rules and restrictions. A model may not target friendly models when making attacks, unless another game effect allows it to do so.

How to Make an Attack

The following rules apply, in the listed order, to all Attacks made in Dark Age.

Select Assault Group: Attacks are separated into Assault Groups, marked on the Stat Card as AG #1, AG #2, etc. Choose which Assault Group you would like the model to use each time the model is making an attack. You may make an attack with any or all of the attack types found within the Assault Group. Once you have chosen the attacks being made in the Assault Group, check the Rate of Fire of each attack. You may not use an attack more times per game round than its Rate of Fire.

Select a Target: For a target to be valid, it must be an Enemy model in range of the attack in question, and the attacker must have line of sight to the target. If the chosen Assault Group has multiple types of attack listed, the attacking model may split those attacks among any valid targets. Make all attack rolls simultaneously. In the case of multiple targets on one attack, we suggest using different colored d20s and nominating which die pertains to which target.

Determine Target Number: To determine the attack's target number, add the attack's AS to the target's DF, and then apply any modifiers to the attack roll, such as Cover or Charge benefits.

Make the Attack: Whenever called upon to make an attack, roll a number of d20s equal to the chosen Attack's listed Attack Dice. Starting with the lowest result, compare each die to the target number for the attack. If the roll is greater than the TN, the attack fails to hit. If the roll is equal to or less than the TN, the attack has hit.

Check for Malfunction: Many attacks have a Malfunction (MAL) value. After making an attack roll, compare the result(s) to the attack's MAL value. If the roll is equal to or greater than the MAL value, something has gone horribly wrong with the attack, causing it to backfire, jam, kickback upon the wielder, etc. The attack automatically misses and the attacking model suffers an automatic hit from the attack as if it was the intended target; this hit may not be discarded by special abilities or game effects.

Target Uses Defensive Abilities: Some models might have defensive abilities on their Stat Card that allow them to alter or even discard attack rolls BEFORE they actually hit. These abilities trigger after the attacking model has determined his attack roll to be successful, but before any other effects are applied.

Critical Hits and Critical Failures: Rolling a 1 on an attack roll is a critical hit. A critical hit means the target may not roll any defensive Special Abilities, receives no AR Save against the attack, and all Weapon Abilities requiring a die roll versus a Target Number automatically succeed.

Rolling a 20 on an attack roll is a critical failure. A critical failure, in addition to possibly causing a Malfunction, costs the attacking model an additional AP this activation (if the model has any remaining).

Hit-Based Effects Are Applied: Many models will have special or weapon abilities that are noted as taking effect when a model is hit. These are applied in the normal sequence (Acting Mandatory, Other Mandatory, Acting Optional, Other Optional) after a target has had a chance to use its defensive abilities, but before moving on to making AR Saves.

Target Makes AR Save(s): Once a target has been hit successfully (after all defensive and hit-based effects have been applied), the target must make an AR Save. Subtract the PW of the attack, after all modifiers, from the target's AR. This generates the TN the target must roll equal to or below to avoid losing any HP.

Some attacks have a power multiplier listed after them (such as PW 4x2). This number indicates the number of AR Saves required to avoid the loss of HP. Note that an attack with a power multiplier still only counts as one hit and can only generate ONE failed AR Save, regardless of the number of dice that failed from the attack. When multiple dice are called upon to make AR Saves, the results of the dice are resolved starting with the lowest result and moving to the next highest result.

Critical AR Success and Critical AR Failures: When models make AR Saves, a result of 1 indicates a Critical AR Success and a result of 20 indicates a Critical AR Failure. A critical success means the model passes the check, regardless of the TN and the results showing on any other die, and can override a critical failure. A critical failure means the model fails the check, regardless of the Target Number, and the model suffers an additional 1 HP from the attack.

Selective Fire Assault Groups

Sometimes an assault group will have multiple ways it can be used to generate attacks. These are known as Selective Fire assault groups.

When you select an attack with Selective Fire to be used, you must choose one of the profiles listed below the attack name; that is the profile that will be used for the attack. If an attack with Selective Fire can be used multiple times in a round, a different profile may be used each time the attack is selected.

Note that sometimes a Selective Fire attack will have weapon abilities listed under the primary attack and its different additional profiles. In these cases the abilities listed under the primary attack are conferred to all the profiles, while the abilities listed under its different profiles are only active when that profile is being selected.

Example: A Dragyri Blizzard, AR 18, is successfully hit by a Coil's launched Death Disk – which has a PW 4x2. The Blizzard must therefore pass two AR Saves with a TN of 14 in order to avoid losing 1 HP. The lowest result is a 12, a success, but the other result is a 20…a Critical AR Failure. The hit inflicts an additional HP of damage, bringing the previously unharmed Blizzard to 0 HP – which results in him being removed from the battlefield as a casualty.

Melee Attack Special Rules

The following rules are important regarding Melee Attacks. Normally a Melee Attack is any attack with a Range value of 0.

Charge Attacks: A Charge Attack occurs when a model spends the automatic bonus AP on a Melee Attack brought into range by Charging movement or another, specifically noted, ability or game effect. The Charge Attack receives a +1 AS and +1 PW for all attack dice rolled for the chosen Assault Group.

Gang Up: An attacking model receives a +1 AS and +1 PW Gang Up bonus to its Melee Attacks for each friendly model engaged with the target model at the time the attack is made. Gang Up bonuses are cumulative.

Reach Attacks (RN RE): Models with Reach may make Melee Attacks against models up to 2" away and in Line of Sight. A model with Reach can choose to Charge a model, gaining the free AP for making the Charge Attack, with Reach if the Charge brings the model to within 2" of the target. A model with Reach may gain the benefits of Ganging Up for the friendly models engaging the target, but it is not considered to be engaged with the target itself.

Arc Attacks (RN ARC): Arc attacks are a special kind of Melee Attack made against multiple targets. They follow all the same rules for Reach attacks with the following additions. Instead of targeting one model, the attack targets all enemy models within 2" of the attacking model and in Line of Sight. Select an eligible target model and make an attack roll. Once that attack is completely resolved, target another model and resolve an attack against it, and so on. A model may only be targeted once per Arc attack action. It is important to note that an Arc attack suffers a cumulative -2 penalty to PW for each target beyond the first, even if the attack(s) misses. Continue making the Arc attack rolls until there are no more eligible targets or the PW of an attack is modified to PW 0.

Sometimes an Arc attack will have no PW to begin with, but only a weapon ability (such as Blind or Knockdown). These Arc attacks make an attack against all eligible targets in range, ignoring the rules for a reduction in PW or ending at PW 0.

Arc attacks can be used when Charging, and follow the same rules as Charging with a Reach weapon.

Ranged Attack Special Rules

The following rules are important regarding Ranged Attacks. A Ranged Attack is any attack with a Range value greater than 0. A model may not make Ranged Attacks while engaged with an enemy model (without special or weapon abilities that say otherwise).

Aiming: A model may spend 1 additional AP when making a Ranged Attack action to gain +2 AS to all Ranged Attacks made during that action.

Firing into Melee: An attacking model suffers a -4 AS penalty to a Ranged Attack targeting a model currently engaged with another friendly model.

Cover

The following rules apply to making Ranged Attacks targeting a model possibly benefitting from terrain with a Cover trait.

Determining if a Model Has Cover: When making a Ranged Attack, a direct line is drawn from the closest point on the attacker's base to the closest point on the target's base within a valid Line of Sight window between them. That line is known as the Attack Path. The Attack Path is what determines if a Ranged Attack has Cover, based on the following rules:

  • If the Attack Path is unobstructed by terrain, there is no Cover.
  • If the Attack Path crosses only terrain that the attacking model is in base contact with, the Cover trait of the terrain is NOT applied.
  • If the Attack Path crosses terrain that the attacking model is NOT in base contact with, the Cover trait of the terrain is applied.
  • If the Attack Path drawn would pass "through" terrain due to the attacking and target models being on different Levels of terrain, the Cover trait of the terrain is applied. If a Cover trait is not specified, Heavy Cover is applied.

Light Cover: Terrain features that might slow down or misdirect most projectiles or merely obscure the target grant marginal protection against incoming Ranged Attacks. A model's Ranged Attack that has Light Cover applied to it suffers a -2 AS.

Heavy Cover: Terrain features that are likely to completely stop a projectile if struck grant significant protection against incoming Ranged Attacks. A model's Ranged Attack that has Heavy Cover applied to it suffers a -4 AS.

Cover penalties do not stack. When multiple sources of Cover can be applied to a Ranged Attack, always use the highest penalty amongst the sources.

See the Battlefield Terrain section for information on what kinds of terrain features offer Light and Heavy Cover.

Template Attacks

Template attacks are a special kind of Ranged Attack that covers a large area with a single attack, indiscriminately damaging all models within that area.

Errata (April 2018), page 44: add the following paragraph immediately after the opening paragraph of Template Attacks: "Like other Ranged Attacks, Template Attacks have some universal rules that are applied in all of their uses. Template Attacks ignore AS penalties from Terrain Keywords and may never be purposefully placed in a way that would potentially hit friendly models. Blasts or malfunctions that deviate or scatter from their intended placement can and will automatically hit any models that end up under their respective template."

Blast Attacks: Blast attacks are listed under their attack profiles as Blast (x), where (x) indicates the size of the template (available in the back of this rulebook) used when making the attack. The following rules apply when making a Blast attack:

  • Targeting Blast Attacks: Models making Blast attacks may target an initial target model or they may instead target a specified point on the table or terrain within the attack's maximum range. When targeting another model, place the blast template so that the center hole is anywhere completely over the target's base and still within the attack's maximum range before making a normal Ranged Attack at the target. If the attack hits, all models under the template are hit by the attack. When targeting a point on the table or terrain, the attacker places the blast template within range so that the center hole is NOT touching any model's base and makes an attack roll. This roll is used to determine if there has been a malfunction only; all other results cause the Blast attack to scatter.
  • Missed Blast Attacks: If the attack misses but does not malfunction, the blast template will scatter. When making a scatter roll for a Blast attack, roll a d20 near where the attack was targeting. The blast template scatters in the direction of the die's topmost triangle ½ the distance shown. Blast attacks can only scatter a maximum distance of ½ the distance between the attacker and the target.
  • Blast Attack Critical Hits and Malfunctions: Unlike other attacks, Blast attacks cannot generate Critical Hits. They can however, malfunction. Should a Blast attack malfunction, it does NOT scatter. Instead, the opponent places the template's center hole anywhere completely over the attacking model's base. The model that generated the malfunction suffers an automatic hit that cannot be discarded in any way, while all other models under the template suffer a normal automatic hit.

Spray and Stream Attacks: Spray attacks are short, cone-shaped directional attacks. Stream attacks are longer, nearly rectangular-shaped directional attacks. The templates for these attacks can be found in the back of this book.

  • Targeting Spray/Stream Attacks: When making a Spray or Stream attack, select an initial target and generate a normal Attack Path between it and the attacker. The attacker then places the appropriate Spray/Stream template with the short end touching the firing model's base and in a way so it covers the specified Attack Path and some part of the target's base. The attacker then resolves a Ranged Attack against the target, then does the same against every other model under the template. Follow all the normal rules for Ranged Attacks, except that Spray/Stream attacks ignore the penalties for Cover and cannot be willingly placed where it would hit friendly models. Additionally, only the attack roll against the initial target may benefit from Aiming, generate Critical Failures, or generate Malfunctions.
  • Spray/Stream Attack Malfunctions: If a Spray/Stream attack generates a malfunction, instead of placing the appropriate template normally, roll an additional d20 near the attacking model. The template is instead placed so its short end is touching the attacker's base at a point where it extends out in the random direction shown by the upper point on the top facing of the die. The model that generated the malfunction suffers an automatic hit that cannot be discarded in any way, while all other models under the template suffer a normal automatic hit.

Targeting Blast and Spray/Stream Attacks on Terrain Levels: Models making attacks using any type of targeting template (Blast, Spray, Stream, Proximity Strike, etc.) choosing to fire into a Terrain Feature with any Levels higher in elevation than the tabletop ignore the elevation for the purposes of Range, but may only effectively hit targets on one chosen level (or the tabletop). Ranges are calculated and measured on the same plane as the tabletop, but only targets on one level can be targeted by the template. In the case of a template scattering into Terrain with multiple levels, only models on the same level as the attacking model are affected.

Panic, Damage, & Dying

There are many ways in a game of Dark Age to suffer damage. This damage will eventually result in the models dying and becoming a casualty. Failing an Armor Check results in the removal of 1 HP from a model. There are other ways for damage to be assigned to models, but this is the most common way for models to lose HP.

Panic

Many special abilities and weapon abilities cause Panic in the enemy. These range from instances where a model is horrifically torn apart by a killing blow or mind-shattering psionic torture, through to a natural response to seeing a preternatural predator heading your way. This collective state of "fear overriding learned behavior" is represented by models gaining Panic Counters.

Models with a Panic Counter suffer -2 AS, -2 PS, and +2 DF. During its activation, a model with a Panic Counter may spend 1 AP to make a PS Check, removing the Panic Counter on a success. A model may only have 1 Panic Counter at any time.

Losing Multiple HP

There will be instances where a model suffers multiple HP worth of damage in a single attack or game effect. When this occurs the model removes a single HP at a time, reacts to that loss in any applicable ways, then removes the next HP, reacts to that, and so forth.

Dying

Once a model has been reduced to 0 HP and all applicable reactions to that loss have been taken into consideration, the model is considered Killed and removed from the battlefield as a casualty.

There are some instances, based on special abilities or game effects, when a model will not be removed as a casualty and instead remains on the battlefield with a Dying Counter. More information on Dying Counters will be found in the description of the effect that allows for it, but the following rules apply to ALL versions of Dying Counters. Note that these effects might be described on a unit's Stat Card as well, but are added here for easy reference.

  • Dying models are automatically made Prone.
  • Dying models cannot activate, and therefore cannot use any Optional abilities.
  • Dying models do not count as engaging enemy models for purposes of Breaking Free or Ganging Up.
  • Dying models do not count as being able to score friendly Primary or Secondary Objectives.
  • Dying models count as being killed at the end of a game despite having not been removed from play.

Psychogenics

Some models have access to powerful mental, biological, or advanced technological traits that fall outside the normal jurisdiction of a special ability. Though these effects go by many names (Foci, Bio-Gens, etc.) they are all classified as Psychogenics and use the following rules (unless specified in a particular faction's guidelines).

Offensive Psychogenics are special Assault Groups, added to the possessing model's existing Assault Groups, containing one or more attack types. These Psychogenics follow all the rules for an attack of their type, such as Aim, Cover, and Malfunction. Note that some Offensive Psychogenics will list additional effects or prerequisites when using them as an attack.

Sometimes, instead of having a PW value, an Offensive Psychogenic will call for the targeted model to make a PS Check. If this check fails, the targeted model suffers the effects listed under the Psychogenic's description.

Augmentation and Environmental Psychogenics: Augmentation Psychogenics are improvements or special abilities granted to a friendly model. Environmental Psychogenics are non-attack effects that are brought into play and target specific points on the battlefield or even enemy models. If the Psychogenic in question targets a specific model, the player must select a target within Line of Sight when the augmentation is cast. Each augmentation lists the Target Number needed to successfully cast the Psychogenic. A model casting the Psychogenic must spend 1 AP and roll equal to or under the TN. If successful, the effects listed on the Psychogenic's specific card are applied.

Psychogenic Malfunctions: Using Psychogenics during a battle sometimes puts undue stress on the user, symbolized by the presence of a Malfunction value listed on most Psychogenics. Unlike a normal attack roll or roll to activate other special abilities, if the dice roll to activate or attack with a Psychogenic shows one or more results equal or exceeding the MAL value, something has gone wrong. When this occurs, the user suffers the effect listed under Malfunction for the Psychogenic being attempted.

Battlefield Terrain

Terrain includes the features that litter the battlefield. Each Terrain Feature has keywords that describe its effect upon models within or potentially near it. Before the game begins, both players should agree on the general theme of keywords for the battlefield, and then specifically the terrain keywords for each piece of terrain.

Every Terrain Feature will have, in addition to any terrain keywords, either a Size Category (S, M, L, H, or G) or the "Does Not Block Line of Sight" keyword.

Terrain Keywords

Blocks Line of Sight: Line of Sight may not be traced through this Terrain Feature.

Climbable: This Terrain Feature is climbable (see Climbing on page 37).

Dangerous: Models that enter or are forced to move through this Terrain Feature (unless Jumping over, see Jumping on page 37) suffer an automatic PW 4 hit that cannot be discarded.

Does Not Block Line of Sight: This Terrain Feature is considered to have no height at all or is somehow transparent, meaning that it cannot block Line of Sight in any way to models behind it.

Heavy Cover: When this Terrain Feature grants Cover to a target, it grants Heavy Cover (see the rules for Cover on page 43).

Impassable: Models may not move through or be moved through this Terrain Feature. If a model has enough distance to Jump over the Terrain Feature or a special ability that allows models to ignore terrain (Vault, Shadewalk Psychogenic, etc.), they cannot end their movement even partially within the Terrain Feature.

Jumpable: Models may jump from this Terrain Feature to another Terrain Feature with the Jumpable keyword as part of a Jumping Move action. Models making jumps from this Terrain Feature may move from a higher level to a lower level (or the ground level) on another Terrain Feature as part of their Jump for no additional cost in AP. See Jumping on page 37 for more details.

Levels (x): This Terrain Feature has (x) distinct levels (floors, landings, etc.) above the ground floor on which models may climb up, jump to, or move upon. There has to be some kind of ability to gain access to these levels, whether it is ladders, ropes, rough heaps of rubble, etc. for them to be a viable resource. Models with Reach or that are of Huge (H) size or larger can target models up to one level higher than theirs with Melee Attacks so long as they can draw Line of Sight to the target.

Light Cover: When this Terrain Feature grants Cover to a target, it grants Light Cover (see the rules for Cover on page 43).

Obscuring: This Terrain Feature blocks a model's Line of Sight unless, from the Viewer's Line of Sight window, less than 2" of this Terrain Feature lies between it and the target.

Rough: A model must forfeit 2" of its movement distance when moving into or through this Terrain Feature. A model only suffers the movement penalty from the Rough keyword once per Terrain Feature, per activation, allowing a model to spend multiple AP on Movement to overcome the penalty. If it cannot afford this penalty, it may not move into or through this Terrain Feature.

Example: The Bane is 8" away from the edge of some rubble (Rough Terrain Feature). She spends 2 AP on movement with a MV value of 3. Now 2" away with only 3" of movement gained from a third AP, the Bane cannot actually enter the rubble because it does not have the additional 2" to sacrifice for the Rough keyword.

Sunken: Models within the Terrain Feature are considered to be one size smaller for Line of Sight purposes and automatically gain the Terrain Feature's Cover rating.

Wall: A model may move through this Terrain Feature if it is the same size or smaller than the model, but the model may not end its movement with its base overlapping any part of the Terrain Feature. If a Wall Terrain Feature is of one size larger than a model, that model may spend 1 AP to scale a Wall it is currently touching and be placed on the closest point on the opposite side of the Wall.

Xenosathic: This Terrain Feature is thick with the energized xenosathic crystal found throughout many areas of Samaria. Any Template Attack (Blast, Spray, or Stream) that partially overlaps this Terrain Feature gains +1 power multiplier, but lowers its MAL value by -1.

Terrain Examples

The following are good examples of Terrain Features that could be used to create a Dark Age battlefield.

  • Barbed Wire: Size Medium, Dangerous, Rough, Wall
  • Bubbling Blackmire Pool: Does Not Block Line of Sight, Dangerous, Rough, Sunken
  • Charnel Pyre: Size Large, Dangerous, Light Cover, Rough
  • Chest-High Hedge: Size Small, Light Cover, Wall
  • Dragyri Standing Stone: Size Huge, Heavy Cover, Impassable, Xenosathic
  • High Corrugated Wall: Size Large, Heavy Cover, Impassable, Wall
  • Howler Corpse: Size Gigantic, Heavy Cover
  • Minefield: Does Not Block Line of Sight, Dangerous
  • Pile of Corpses: Size Medium, Light Cover, Rough
  • Ruin Rubble: Size Huge, Heavy Cover, Rough
  • Salt Flat Quicksand: Does Not Block Line of Sight, Light Cover, Rough, Sunken
  • Statue of the Creator: Size Large, Light Cover, Impassable
  • Trench: Does Not Block Line of Sight, Sunken, Heavy Cover
  • Size Huge, Light Cover, Obscuring, Rough

Complex Terrain Features

Complex Terrain Features, such as intact buildings or constructions, describe pieces of terrain that can incorporate many different keywords that interact in various ways. When assigning keywords to these types of terrain, it may be beneficial to assign keywords to various pieces of the Terrain Feature such as walls, windows, stairwells, etc., rather than assign them to the entire structure. Each Complex Terrain Feature will be different, but here are some good examples:

Outcast Scavenger Hide

  • Levels: 2
  • Entire Area Structure: Obscuring
  • Outer Walls: Block Line of Sight, Impassable
  • Windows: Does Not Block Line of Sight, Light Cover, Rough

Prevailer Bunker Complex

  • Levels: 3
  • Perimeter Defense Trenches: Does Not Block Line of Sight, Sunken, Heavy Cover
  • Sniper's Tower: Size Gigantic, Levels (3), Climbable, Heavy Cover
  • Inner Fencing: Size Large, Light Cover, Wall
  • Primary Area Structure: Heavy Cover, Obscuring

Kukulkani Terraform Jungle

  • Levels: 1
  • Overgrown Foliage: Obscuring, Rough
  • Thick Trees: Blocks Line of Sight, Heavy Cover, Impassable

Special Abilities

These are the unique abilities and skills the models of Dark Age possess. In Dark Age, unless it is stated otherwise, all models are considered to have the Living Special Ability.

Ambush: Do not deploy this model as normal. During any Preparation Phase after Round 1 you may deploy this model by choosing a point on the battlefield and performing a scatter roll from that point, placing this model as close as possible to the location of the scatter. Models with Ambush that share a Squadlink Keyword may deploy using 1 Scatter Roll, placing the first model on the point and the rest within 4".

Animosity (x): This model may not be included in any force that has a model named (x).

Assassination: This model does not deploy at the start of the game. During any Preparation Phase after Round 1 this model may be deployed. When deployed, choose any point on the battlefield and place this model on that point.

Backstab: This model gains +2 AS and +2 PW to all attacks made against a model that has not activated this round.

Berserk: This model may spend 1 AP to gain 1 Berserk Counter. A model may only have 1 Berserk Counter at any time.

Berserk Counter: This model gains +1 AS, +1 PW, an additional power multiplier to melee attacks, and the Never Panic special ability. After any activation in which this model did not make a melee attack they gain an Exhaustion Counter.

Exhaustion Counter: This model suffers -1 AP per Exhaustion Counter. If this model activates with 0 AP due to Exhaustion Counters, remove all Berserk and Exhaustion Counters and end their activation.

Bio-Enhance (x): During this model's activation, you may discard 1 Bio-Energy Counter to trigger Bio-Enhance (x). If you do, this model gains (x) until the end of its activation. Each instance of Bio-Enhance may be triggered once per activation.

Blink: If this attack kills an enemy, you may place this model anywhere within 6" after the attack is resolved.

Blood Sacrifice: When this model dies, give 1 model within 8" 1 Bloodlust Counter.

Bloodlust Counter: When this model would lose HP, it may discard this counter to prevent losing that HP. A model may only have 1 Bloodlust Counter at any time.

Bloodlust: Whenever this model kills an enemy that has a Bleed Counter, it gains 1 Bloodlust Counter.

Brood Mind: This model does not count for friendly Primary or Secondary Objective purposes, and cannot benefit from or count for Gang-Up bonuses. All Brood Mind models must activate as a single Squadlink when activated, ignoring the distance between them. They may not otherwise Squadlink in any way.

Burrow: For 1 AP this model may gain 1 Burrow Counter.

Burrow Counter: This model has -4 DF and +2 AR, but cannot make attacks. You may remove all Burrow Counters at the start of this model's activation. A model may only have 1 Burrow Counter at any time.

Cabal (x): If this model begins its activation within 8" of (x), it may re-roll 1 attack roll this activation.

Chilling Aura: While within 2" of this model, enemies suffer -2 AS.

Controller (x): During the Preparation Phase, this model gains (x) Control Counters. It may have a maximum of (x) Control Counters at any time.

Control Counter: Control Counters are utilized by models with the Program (x) special ability. See those models' individual Stat Cards for more information.

Combat Tactics: This model has multiple Stat Cards. At the start of this model's activation it selects which Stat Card this model will use until its next activation.

Combat Reflexes: Enemies never gain bonuses for Charging or Gang-Up against this model. This model may stand up from Prone for no AP cost.

Commander: This model counts as having access to all Squadlink Keywords.

Consume Brood: Once per activation, this model may spend 1 AP to automatically remove a friendly model in contact with it from play as a casualty. If it does so, this model heals 1 HP.

Crack Shot: This model ignores Light Cover, and treats Heavy Cover as Light Cover.

Defiance: This model may not be targeted or affected by Psychogenics.

Deflection: When this model is targeted by non-template ranged attacks, after attack rolls are made, this model may make an AS Check. If the check is successful it may discard 1 non-critical hit from those attacks.

Distraction: While engaged with an enemy, other friendly models gain +1 AS and +1 PW to melee attacks against that enemy. Distraction is not cumulative.

Enhance (x)(y): When this model is deployed, choose up to 6 (x). Those models gain (y).

Enhanced Optics: When this model Aims, it gains an additional +1 AS. Additionally, it ignores Light Cover and treats Heavy Cover as Light Cover for its attacks. (As replaced by the April 2018 Errata, page 51; the printed definition read: "When this model Aims, it gains an additional +1 AS, ignores Light Cover, and treats Heavy Cover as Light Cover for this attack.")

Enviro Filters: This model ignores Smoke Clouds.

Explosive End (x): When this model is killed, place a Blast (2) template with the center hole anywhere completely over this model's base. Each model under the template suffers an automatic hit from (x), and then this model is removed (this is a Template Attack).

Field Order (x)(y): This model has (y). While (x) is within 8" of this model, it gains (y).

Final Strike: When this model would be killed, it may make a PS Check. On a success it may select and perform 1 of its attacks before being removed.

First Claim: During the Preparation Phase, this model may take 1 Scavenge Counter from a friendly model within 8".

For the Swarm!: This model may spend 1 AP when in contact with a wounded friendly model to heal 1 HP to that model. Remove this model from play immediately after.

Frenzied: At the start of each activation, this model must make a PS Check. On a failure it does not activate as normal, but instead uses its activation to immediately move directly toward the nearest model with a different model name and use any remaining AP to perform melee attacks on that model.

Fueled by Combat: Once per round, when this model kills an enemy with this attack, it may make a PS Check. On a success, it may heal 1 HP.

Furious Charge: This model gains an additional +1 AS and +1 PW to charge attacks.

Ghost in the Machine: Enemy models within 2" of this model suffer -1 MAL to each attack with a MAL Value. Ghost in the Machine is cumulative.

Guard: When a friendly model within 4" and line of sight is targeted by a non-template ranged attack, this model may become the target of the attack instead (Guard may not trigger another model's Guard ability).

Guerilla Tactics: Models with Guerilla Tactics may Squadlink from up to 8" away. This model only spends 1 AP to Break Away.

Note: When Squadlinking, this ability replaces all references to the normal 4" distance with 8".

Heart of the Flame: This model may never gain Fire Counters. Enemies hitting this model with melee attacks gain 1 Fire Counter at the end of their activation.

Hit and Run: When this model kills a model with an attack, it may immediately gain 1 AP to Move. This move action ignores the rules for Breaking Free and may result in a Charge.

Honor Bound: At the start of each Preparation Phase, gain 1 Vengeance Counter.

Honor Seeker: Whenever this model kills an enemy, gain 1 Vengeance Counter.

Horrific Visage: Enemies within 4" may not remove Panic Counters. Enemies with Panic Counters activating within 4" must make a PS Check. On a failure they lose 1 AP.

Human Shield: When this model is hit by an enemy non-template attack, it may force 1 friendly model within 4" to be hit by the attack instead. That attack gains an additional power multiplier for this hit (Hits from Human Shield cannot trigger Human Shield).

Note: The hits applied through the use of Human Shield cannot be discarded.

Immune (x): This model may never be affected by (x).

Note: For models that are listed with Immune (Critical Hits), the model still suffers a regular hit when a Critical Hit is rolled on an attack; the model is merely immune to the benefits of the Critical Hit result.

Note: Being immune to a Special or Weapon Ability does not make the model immune to other effects that cause the same result. Thus, if a model has Immune (Knockdown), while it is immune to all instances of the Knockdown (x) Weapon Ability, it can still be made Prone by other game effects.

Improved Climb: This model may treat all areas of a terrain piece with the Levels keyword as having the Climbable keyword.

Incite: When this model Squadlinks, all other non-Character models in that link gain +2 AS to melee attacks this activation.

Infiltrate: This model is only deployed after all non-Infiltrating models have been deployed. This model may be deployed anywhere on the battlefield that is at least 12" from an enemy deployment zone.

Inspiring: Other non-Character models this model Squadlinks with gain +1 AS to all attacks, and an additional +1 PW to melee attacks.

Instigate: Friendly non-Character models within 8" gain +2 AS to all melee attacks.

Ion Shield: Each time this model is targeted by attacks, before attack dice are rolled, it may make a PS Check. On a success, the enemy targeting this model gains 1 Disruption Counter. (See Disruption on page 60.)

Irradiated: Enemy models in contact with this model suffer -1 AS and -1 PW when performing melee attacks.

Jury Rig: This model may discard 1 Scavenge Counter to re-roll a failed attack roll (the Scavenge Counter benefit still applies for that attack).

Lucky: This model begins the game with 1 Luck Counter.

Luck Counter: This model may discard this counter at any time to re-roll 1 attack roll or AR Save it performs.

Mark for Death: During the Preparation Phase, select 1 enemy within 12" and line of sight. Models gain +1 AS and +1 PW to attacks made against that enemy this round.

Masochist (x): At the start of this activation, this model may gain (x). If it does so, it loses 1 HP at the end of this activation.

Master of Air: Enemies never gain bonuses for Charging or Gang-Up against this model. This model may never be knocked Prone by enemies and ignores the Rough and Dangerous keywords of terrain pieces.

Master of Death: At the start of each Preparation Phase, add 1 Bio-Energy Counter to your Bio-Energy pool.

Matched Set (x): This model may only be included in a force that also includes (x).

Medic: Other friendly, Living, models reduced to 0 HP while within 8" of this model are not killed, but instead gain 1 Dying Counter.

Dying Counter: This model is prone and may not activate. If this model would ever lose HP, it is killed. At the start of the Lingering Effects Phase, if a friendly, non-dying, model with Medic is not within 8", kill this model. Remove this Counter if this model is ever healed.

Mental Link (x): All friendly (x) models use this model's PS in place of their own PS for all PS Checks, taking into effect all current modifiers on both models.

My Pretty Toys: When this model is deployed, select up to 6 "Buzzblade" models. Upgrade those models to either "Charity's Might" or "Charity's Zeal".

Never Panic: This model may never gain Panic Counters.

Nightmare Aura: Any model moving into base contact or starting their activation within 1" of this model must pass a PS Check or gain 1 Panic Counter. Models that already possess a Panic Counter that fail this check suffer an automatic PW 4 hit.

Non-Living: This model may never gain Panic Counters. This model's PS may never be modified by enemy effects.

Oath of Fury: Each time a model with Oath of Fury is killed, all other models with Oath of Fury gain 1 Oath Counter. Models gain bonuses based on the number of Oath Counters they have (these effects are not cumulative).

  • 1 Oath Counter: +2 AS to all attacks.
  • 2 Oath Counters: +1 AP, +2 AS, and the Unstoppable special ability.

Order (x)(y): When this model Squadlinks with (x), those models gain (y) this activation.

Pack Attack: This model's melee attacks roll a number of dice to hit equal to their current remaining HP.

Parry: When this model is targeted by melee attacks, after attack rolls are made, this model may make an AS Check. If the check is successful it may discard 1 non-critical hit from those attacks.

Note: Only a single non-critical hit may be discarded when using the Parry ability against a Melee Attack with multiple dice rolled in the attack.

Power Generator: When this model activates it may power either its armor or specific attacks. If armor is selected, roll 1 additional d20 when making AR Saves, discarding the highest result. After this is done, if there is a result of 16 or higher, this model automatically fails its AR Save and loses 1 additional HP. If attack is selected, the attack must use the profile listed under its "Powered" version. These benefits last until the beginning of this model's next activation.

Program (x): This model may remove 1 Controller Counter from a friendly model it is squadlinking with. If it does so, it gains (x) this activation. Each Program may only be selected once per activation.

Psychogenic Feedback: Whenever an enemy within 8" casts a psychogenic it must perform a PS Check at -4 after that action is complete. On a failure it loses 1 HP.

Psychogenic Master: Twice per turn, this model may spend 1 AP to cast one of its psychogenics.

Psychogenic Neophyte (x): This model may spend 1 AP to cast the (x) psychogenic.

Psychogenic Resolve (x): (x) times per game, when a malfunction is rolled from a psychogenic, that model may ignore the malfunction. This ability functions even if this model is killed.

Quick Draw: This model may spend 1 AP to make an Aimed ranged attack, or move up to their MV value and make a ranged attack.

Rage: This model's melee attacks gain +2 PW for each missing HP.

Reconnaissance: This model may always choose to deploy using its Infiltrate special ability before any other models using the Infiltrate special ability. It and any other friendly models with the Infiltrate special ability that share its Squadlink keyword may deploy up to 6" away from an enemy Deployment Zone instead of the normal distance allowed.

Reconstruction: Models of Large size or larger with the Non-Living special ability reduced to 0 HP while within 8" of this model places 1 30mm Scrap Counter in base contact with it before being removed from play.

Scrap Counter: Any model with the Reconstruction special ability in contact with this Counter can spend 1 AP to remove it and place a new Menial Bot model anywhere in base contact with it.

Regeneration: At the start of this model's activation, it heals 1 HP. When this model is reduced to 0 HP it is not killed, but instead gains 1 Regeneration Counter.

Regeneration Counter: This model is prone, and may not perform attacks. If this model would ever lose HP, it is killed. Remove this Counter if this model is ever healed.

Note: When a model removes the Regeneration Counter, it does not also remove its Prone state.

Resourceful: Once per round, while in contact with an Objective Marker, this model may make a PS Check. If that check is successful it gains 1 Scavenge Counter.

Note: Although a model can be technically "in contact" with something at any point during a Movement, the Resourceful Special Ability may only be called upon during the model's activation, before or after an expenditure of AP – not in the middle of a Movement Action.

Retaliation: When an enemy misses this model with a melee attack, and this model has not been killed, after all attacks are resolved this model may select 1 of its attacks and perform it against that enemy.

Note: Only 1 type of attack is generated by Retaliation per attack action taken by the enemy. No matter how many miss results happen in that action, Retaliation only generates 1 set of attack dice in response.

Riposte (x): This model adds (x) to all AS Checks for the Parry special ability. When it successfully Parries, it may immediately make 1 melee attack against the attacking enemy.

Note: Adding (x) to the AS Check is a benefit. It adds to the TN, not the die result.

Ritual Engine (x): This model may cast Kukulkani Rituals, and may select 1 additional Ritual to have active (and may switch these Rituals as per the Technomancy rules). At the start of each Preparation Phase, add 1 Bio-Energy Counter to your Bio-Energy pool. When this model is killed, add 4 Bio-Energy Counters to your Bio-Energy Pool.

Ritual Sacrifice: When this model is killed, it may make a PS Check. On a success add 1 Bio-Energy to your Bio-Energy pool.

Sadistic: This model's melee attacks gain +2 PW when targeting a model with a Panic Counter.

Scavenge: While a model with Scavenge is in play, whenever a model is killed or removed from play, place 1 Scavenge Counter in contact before it is removed. Any model with Scavenge may automatically pick up Scavenge Counters by moving over them.

Scavenge Counter: This model gains +1 AR, and +1 AS and +1 PW to all attacks, for each Scavenge Counter. If this model is killed or removed from play, place all Scavenge Counters it has in contact with it before it is removed. A model may have up to 3 Scavenge Counters at any time.

Sedated: This model begins the game with 1 Sedation Counter.

Sedation Counter: This model ignores the Frenzied special ability, and may not perform attacks. You may remove the Sedation Counter at any time during this model's activation.

Shard Scatter (x): Once per activation, this model may spend 1 AP to place 1 Shard Field (x) anywhere completely within 2". This may be done as an On-Hold Action.

Shard Field (x): This terrain piece is represented by a Blast (1) Template. Any model entering, or beginning their activation within, the Shard Field suffers (x), and then the Shard Field is removed.

Shard Walk: This model ignores Shard Fields.

Shield Formation: While not prone, and within 1" of another model with Shield Formation, this model gains +2 AR.

Shockwave: This model may spend 1 AP to give all enemies within 2" 1 Stun Counter. In addition, enemies with a smaller size are also knocked prone. Enemies at least two sizes smaller are automatically pushed directly away 6" as well. (See Stun on page 61.)

Sidestep: When this model is hit by a non-critical hit from a melee or template attack, and is not prone, roll a d20. On a roll of 12 or less the attack roll is discarded.

Skylancer Jets: When this model powers its Armor via Power Generator it gains +1 MV and may ignore models and terrain when moving this activation.

Note: The model must abide by models and terrain after its activation however, meaning it cannot end with its base overlapping another model or Impassable terrain.

Smoke Bomb: This model may spend 1 AP to place 1 Smoke Cloud anywhere completely within 6". This may be done as an On-Hold Action.

Smoke Cloud: This terrain piece is represented by a Blast (3) Template. Models in a Smoke Cloud gain Heavy Cover. All melee attacks targeting models in a Smoke Cloud suffer -4 AS. Remove this terrain piece at the end of the next Lingering Effects Phase.

Spike Shower: Once per activation, this model may spend 1 AP to give all enemies within 2" 1 Blind Counter.

Sniper (x): When this model Aims, its ranged attacks gain Critical Strike (x), where (x) is equal to this model's Sniper (x) value.

Stim Injection: When this model Squadlinks, any non-Character model it links with may receive +1 MV this activation. If this is done, that model gains 1 Stun Counter at the end of its activation. (See Stun on page 61.)

Stoneskin: When this model is hit by a non-critical attack, roll a d20. On a 10 or less the model suffers one less HP of damage from the attack, but could still be affected by any weapon abilities triggered by the hit (Knockdown, Sunder Armor, etc.).

Strider: This model ignores the Rough keyword of terrain pieces. This model may stand up from prone for no AP cost.

Superior Gang-Up: This model receives an additional +1 AS and +1 PW from Gang-Up.

Superior Maintenance (x): (x) times per game, when a malfunction is rolled from a non-psychogenic attack, that model may ignore the malfunction. This ability functions even if this model is killed.

Suppression (x): While within 8" of this model, the (x) ability is ignored on models.

Survivalist: If this model only spends AP on Movement during its activation, it may go On Hold for free at the end of that activation.

Note: Free AP generated by movement, like those gained from Charging, will deny the benefit of Survivalist.

Swarm (x): When deployed, (x) Pud Roamer models are also deployed for free within 6" of this model.

Taskmaster (x): Other non-Trueborn models this model squadlinks with may gain (x) this activation. If this is done, that model must make a PS Check at the end of its activation. On a failure, it loses 1 HP. A model may only benefit from Taskmaster once per activation.

Technomancy: This model may cast Kukulkani Rituals.

Tough as Nails: This model ignores Critical AR Failure.

Unstoppable: Whenever this model would be reduced to 0 HP, it may make a PS Check. On a success, this model remains at 1 HP, but gains 1 Weakened Resolve Counter.

Weakened Resolve Counter: This model suffers -4 PS. Weakened Resolve Counters are cumulative.

Unusual Clients (x): This Bounty Hunter may only be included in (x) faction forces.

Upgrade (x): This model possesses (x) C.O.R.E. Upgrades, chosen before the beginning of the game. Some models will have specific Upgrades named as the (x).

Vault: Once per activation, this model may spend 1 AP to immediately move their MV value, ignoring terrain as well as intervening models. If this move results in a charge, this model gains an additional +1 AS and +1 PW to the charge attack.

Vengeance: Once per round, when another friendly model within 2" is attacked, after that attack is resolved, this model may move up to 2" and make 1 melee attack on the attacking enemy.

Vigilance: If this model ends its activation unengaged it automatically goes On Hold.

Virulent Fumes: Enemy models suffer -1 AS and -1 PW while within 2" of this model.

Volatile Enhancement (x): Other non-Character models this model squadlinks with may gain (x) this activation. If this is done, that model loses 1 HP at the end of this activation. A model may only benefit from Volatile Enhancement once per activation.

Weaken Resolve: While within 8" of this model, enemies suffer -1 PS.

Weapon Abilities

These are the unique abilities and effects of the various weapons and other attacks in Dark Age.

Adaptability: Once per round, this model may select 1 weapon ability from any attack on a model it is in contact with (friendly or enemy). This attack gains the chosen weapon ability until the end of this model's activation.

Bleed: Living models hit by this attack gain 1 Bleed Counter.

Bleed Counter: During the Lingering Effects Phase roll a d20. On a result of 11 or greater this model loses 1 HP, otherwise, remove the Bleed Counter. A model may only have 1 Bleed Counter at any time.

Blind: Models hit by this attack gain 1 Blind Counter.

Blind Counter: This model suffers -4 AS. Remove all Blind Counters at the end of this model's activation. A model may only have 1 Blind Counter at any time.

Brutal: The Parry special ability may not be used against this attack.

Burst: All attacks made from this assault group must target the same model. Attacks with Burst may not be Aimed.

Conduction: This attack gains an additional power multiplier against the highest AR model hit. In the case of a tie, the attacking model decides who suffers the additional multiplier.

Contagion: This attack may re-roll misses if targeting a model that already possesses one or more Toxic Counters.

Critical Strike (x): This attack Critically Hits on attack rolls of (x) or less.

Crush: If this attack hits, all further attacks this model makes against the target automatically hit this activation unless a malfunction is rolled. These hits may not be Parried.

Note: The automatic hits may not be discarded using Sidestep, either.

Decapitate: If this attack Critically Hits, its target loses 1 additional HP.

Devastating Charge: This attack gains Extreme Damage when used as a Charge attack.

Disruption: Models hit by this attack gain 1 Disruption Counter.

Disruption Counter: This model's attacks that have a MAL Value suffer -2 MAL per Disruption Counter. During the Lingering Effects Phase, roll 1 d20 for each Disruption Counter, removing it on a roll of 10 or less.

Emberspark: If this attack kills an enemy, place 1 "Ember" within 4" of this model.

Empower: This attack gains 1 additional power multiplier each time it is used after the first. These bonus power multipliers last until the next Lingering Effects Phase.

Extreme Damage: Models that fail an AR Save caused by this attack lose 2 HP.

Finishing Blow: This attack gains 1 additional power multiplier and Extreme Damage when targeting models that are Prone.

Fire: Models hit by this attack gain 1 Fire Counter.

Fire Counter: This model may spend 1 AP to roll a d20. On a result of 10 or less remove the Fire Counter. This model suffers 1 automatic PW 4 hit for each AP it spends on actions other than removing the Fire Counter. Resolve these automatic hit(s) after the action is completed. A model may only have 1 Fire Counter at any time.

Horrible Death: If an enemy is killed by this attack, all enemies within 4" of the model killed receive 1 Panic Counter.

Immobilize: Models hit by this attack gain 1 Immobilized Counter.

Immobilized Counter: This model suffers -1 MV per Immobilized Counter. Remove all Immobilized Counters at the end of a model's activation.

Knockback (x): When this attack hits a model, after AR Saves are made, roll a d20. If the number rolled is equal to or under (x) then the target is moved directly away 6". Melee attacks suffer -2 to (x) for every size smaller the attacking model is than the target and +2 to (x) for every size larger the attacking model is than the target.

Knockdown (x): When this attack hits a model, after AR Saves are made, roll a d20. If the number rolled is equal to or under (x) then the target is Knocked Prone. Melee attacks suffer -2 to (x) for every size smaller the attacking model is than the target and +2 to (x) for every size larger the attacking model is than the target.

Latch On (AG#x): Attacks from this assault group cannot be selected as normal. If all attacks from (AG#x) hit the same target with the same attack action then Latch On is triggered. When Latch On is triggered, the target immediately suffers an automatic hit from this attack. Until the end of this model's activation, it may spend 1 AP to cause additional automatic hits to the target with this attack.

Life-Siphon: If this attack kills an enemy, add 1 Bio-Energy to your Bio-Energy Pool.

Paralysis: Models hit by this attack gain 1 Paralyzed Counter.

Paralyzed Counter: When this model activates, roll a d20. On a 11 or greater it loses 1 AP and must roll again, continuing until a 10 or less is rolled, or it runs out of AP. Once this is complete, remove all Paralyzed Counters.

Parting Blow: Enemy models that Break Free from engaging this model are automatically targeted and attacked using this attack type before they are allowed to move the model away.

Point Blank: This ranged attack may be used while engaged. If used while engaged, this attack must target an enemy this model is engaged with.

Note: An attack using Point Blank still counts as a Ranged Attack, and does not gain any bonuses noted for Melee Attacks.

Proximity Strike (x): When this attack is selected, place the Blast (x) Template anywhere completely in range of this attack. Make 1 separate attack roll against each enemy model under the template. Only the initial attack roll may suffer Malfunction or gain the benefits of Aiming.

Note: Although it uses a Blast Template to determine potential targets, a Proximity Strike (x) attack is NOT a template attack.

Pull (x): When this attack hits a model, after AR Saves are made, roll a d20. If the number rolled is equal to or under (x) then the model hit is moved directly toward this model until it is in base contact, or comes in contact with another model or a terrain piece it cannot cross. Reduce (x) by 2 for every size smaller the attacking model is than the target and increase (x) by 2 for every size larger the attacking model is than the target.

Reaction Strike: Once per round, when an enemy comes within range of this attack, this model may perform this attack for free against that enemy. This free attack occurs before charge attacks are resolved.

Note: "Comes within range" refers to an enemy model moving (or being moved) into the attack's range, NOT the movement of the model with the attack with the Reaction Strike ability.

Rend: If all attacks from this assault group hit the same target, they gain 1 additional power multiplier for this attack.

Note: Attacks do NOT gain the benefit of Rend if either of the attack dice are discarded for any reason.

Restoration: This attack may target, and automatically hit, friendly models. Friendly models hit by this attack suffer no damage and instead heal 1 HP. A model may only be healed by Restoration once per game.

Rot: Living models hit by this attack gain 1 Rot Counter.

Rot Counter: This model suffers -2 AR per Rot Counter. During the Lingering Effects Phase, roll 1 d20 for each Rot Counter, removing it on a roll of 10 or less.

Stun: Models hit by this attack gain 1 Stun Counter.

Stun Counter: The next time this model activates, it immediately loses 1 AP, and then removes 1 Stun Counter. A model may only have 1 Stun Counter at any time.

Sunder Armor: Models hit by this attack gain 1 Sunder Counter.

Sunder Counter: This model suffers -2 AR. A model may only have 1 Sunder Counter at any time.

Toxic: Models hit by this attack gain 1 Toxic Counter.

Toxic Counter: This model suffers penalties based on the number of Toxic Counters on it. All Toxic Counters are removed at the end of this model's activation. All negatives are cumulative.

  • 1+ Counters: -2 AS to all attacks.
  • 2+ Counters: -2 PW to all attacks.
  • 3+ Counters: Each time this model spends AP on attacks, it suffers 1 automatic PW: 2 hit before resolving those attacks.

Unstable (x): If this attack Malfunctions, this model, and all other models within 1", suffer (x).

Victimize: Models hit by this attack gain 1 Panic Counter.

Whiplash: Models hit by this attack who pass their AR Save gain 1 Whiplash Counter.

Whiplash Counter: The next time this model activates, it immediately loses 1 AP per Whiplash Counter, and then all Whiplash Counters are removed.

Tournament Play & Game Scenarios

This is the official Dark Age tournament format used at events sponsored by or adjudicated by CMON Limited, Dark Age Games, or other official event organization staff.

Force List Composition

  • Each force used in a Dark Age tournament must have an accompanying force list, which must be fully typed out or legibly handwritten at time of entry.
  • All models in a force must have had their rules published or officially released online for at least 30 days at the time of the tournament, barring a majority decision by the players involved and allowed by the event organizer.
  • All models in a force must be represented by the appropriate Dark Age miniature. Proxies may not be used if an official model is available through retail sales. Conversions for models are acceptable, but must be readily recognizable as the model in question, and must be composed primarily of Dark Age miniature components. Infractions of the above rules will result in the offending model(s) being removed from the player's force with no substitutions allowed. If this makes any other model in the force illegal, they will also be removed. If the event uses a Reinforcements sidebar, the force may use models from it to make up for the loss.

Prepare Secondary Objective Decks and Objective Markers

Before the tournament or game begins, each player must create an event deck of Secondary Objectives. This deck must be comprised of 16 or more Secondary Objective cards chosen from those listed in this book, in our downloaded document on www.dark-age.com, or from our printed 2017 Secondary Objectives Deck. The cards in this deck must be indistinguishable from one another on one side to avoid deck stacking or confusion, and there must not be more than one copy of any single card title in the deck.

  • In the case of tournament play, this deck will NOT change from game to game, so players should construct the deck they are comfortable with when playing multiple games.
  • Each player needs to bring three 50mm circular bases, tokens, or terrain pieces to serve as their Objective Markers used in the scenarios.

Tournament Format

The number of rounds in any official Dark Age Tournament is dependent on the schedule chosen by the Event Organizer, but the following are good examples:

  • 4 to 8 Players: 3 Rounds
  • 9 to 24 Players: 4 Rounds
  • 25 to 36 Players: 5 Rounds

A Time Limit for each Round should be put into place, depending on the Point Level of the event (adjusted for any location or event-specific instances). When the Time Limit expires for a Round, the players finish the current Game Round and score their games accordingly.

  • 500 Point Event: 60 minutes
  • 750 Point Event: 75 minutes
  • 1000 Point Event: 90 minutes

Each game is scored based on each player's ability to score Victory Points by meeting particular Mission Objectives, both Primary and Secondary.

Each round will potentially earn the player up to 5 Tournament Points (TPs); 5 TPs for a Win, 3 TPs for a Draw, 1 TP for a Loss, and 0 TPs for any game in which the player chooses to forfeit.

Pairing for each round will be determined randomly for the first matching, but then matching similarly-scored players in later rounds, at the event organizer's discretion. The player that has accumulated the most Tournament Points at the end of the event is declared the winner. In the case of a tie, the total Primary and Secondary Victory Points accumulated by the tied players should be the deciding factor.

Being "Tabled" or Scoring a Forfeit

When a player has all of his deployed models killed before the actual Victory Conditions of the game are met, this is known as being "tabled." In Dark Age, the scenario goals are more important to the overall war effort than the individual lives of the force. In these situations, the player with deployed models remaining scores additional Victory Points to decide the Scenario's winner.

  • The player with models remaining on the battlefield finishes all of their models' normal activations in the current game round, but does not play any additional rounds.
  • The player with models remaining on the battlefield scores 1 additional Victory Point for each game round left in the game to play.

Example: Michael kills Bryan's last model in the middle of Round 5. Michael manages to score one more Secondary Objective with his remaining activations of Round 5, then scores an additional 3 Victory Points for Game Rounds 6, 7, and 8. If Michael's new Victory Point total is now greater than what Bryan accumulated before he was "tabled", Michael wins the scenario.

There may come a time in an event where a player cannot or chooses not to play out the rest of a game of Dark Age. That player forfeits the game. A number of things happen when a player forfeits a game.

  • The forfeiting player's opponent automatically wins the scenario.
  • The forfeiting player's opponent gains a number of additional Victory Points equal to the Lingering Phases remaining in the game. (For tie-breaking purposes in larger events.)
  • The forfeiting player loses the scenario, but retains any Victory Points accumulated up to that point. (For tie-breaking purposes in larger events.)

Example: Dave gets a phone call in the middle of Round 4 and he has to forfeit a game against Jeff. Dave was winning with 9 Victory Points to Jeff's mere 2, but he immediately loses the scenario, recording his 9 Victory Points for future tie-breaking. Jeff is awarded an additional 5 Victory Points for the Lingering Phases of Game Rounds 4, 5, 6, 7, and 8. Jeff records his victory, despite only having a total of 7 Victory Points to Dave's 9.

Setting Up the First Round's Game

  • Before the first round can begin, the event organizer will choose a scenario from amongst the Primary Scenarios included in this book, published in future Dark Age supplements, located in Organized Play Kits, or other sources. All games in that round of the tournament will be played using the rules listed for that scenario.
  • Players will then have an opposing roll of 1d20, the player rolling the lowest becoming Player A and the player rolling higher becoming Player B for the scenario's Primary Victory Conditions. Re-roll tied results.
  • Players will then take note of the set-up rules for the scenario and begin the process of beginning their game. (See the Getting Started section starting on page 33.)

Objective Rules

  • The scenario will list its Primary Objective needed for victory in the game.
  • Unless otherwise specified, Objective Markers are represented by 50mm bases, tokens, or terrain pieces that are considered to be Terrain Features with the following keywords: Does Not Block Line of Sight, Heavy Cover, Rough. Each scenario may add additional keywords or effects to these Objective Markers, and those will be specifically noted.
  • Regardless of scenario, Objective Markers cannot be interacted with for Primary or Secondary Objective purposes until the beginning of Round 2 in a game. Interaction with Objective Markers for other purposes (special abilities, for example) is still allowed.

Scenario 1: Reconnaissance

Agents of one faction have moved into the territory of an opposing force with the hopes of gathering much needed intelligence on them, but someone has given away their location and defenders have been dispatched to deal with them.

Set-Up

  • Before deployment, each player takes turns, beginning with Player A, placing three Objective Markers each (for a total of six) anywhere in No Man's Land, as long as they are not placed within 4" of another Objective Marker or table edge.
  • Models using the Infiltrate special ability may not deploy within 2" of an Objective Marker.

Primary Victory Condition

  • At the end of each Lingering Effects Phase, players earn 1 Victory Point for each FULL 100 points' worth of friendly unengaged models currently within the enemy's Deployment Zone.
  • After scoring, a player achieves Primary Victory if they have accumulated 10 Victory Points and the opponent has not. If both players have 10 or more Victory Points at this time, the player with more Victory Points is declared the winner. If both players have at least 10 Victory Points and are tied, the game is a draw.
  • Alternatively, the player with the most Victory Points at the end of 8 game rounds achieves Primary Victory.

Special Scenario Rules

  • Players may discard BOTH of their Secondary Objectives instead of the normally allowed one during the Lingering Effects Phase.

Deployment: the diagram shows a 12 in Deployment Zone on each long edge with 8 in of No Man's Land between the zones and their edges.

Scenario 2: Unexpected Engagement

Something has caused a stir in the wilderness and locals have taken notice. The soldiers of two nearby forces have ventured into the area to investigate, and have stumbled upon one another. Both forces assume the other is there to stop them!

Set-Up

  • Before deployment, each player takes turns, beginning with Player A, placing three Objective Markers each (for a total of six) anywhere in No Man's Land, as long as they are not placed within 4" of another Objective Marker or table edge.

Primary Victory Condition

  • After scoring, a player achieves Primary Victory if they have accumulated 10 Victory Points and the opponent has not. If both players have 10 or more Victory Points at this time, the player with more Victory Points is declared the winner. If both players have at least 10 Victory Points and are tied, the game is a draw.
  • Alternatively, the player with the most Victory Points at the end of 8 game rounds achieves Primary Victory.

Special Scenario Rules

  • All Secondary Objectives are worth +1 Victory Point in addition to what is normally scored.

Deployment Notes

  • Each player's Deployment Zone consists of BOTH 12" square areas on the same board edge the player has chosen as theirs.

Scenario 3: Burying the Dead

Life on Samaria can be ruthless, especially when conflicts arise. Battles take their toll and forces must eventually remove the remains of all they lost – or what is left of them. The forces have come to a well-known depository for the dead and destroyed; one force to protect their fallen brethren from the other force who has come to rob their graves!

Set-Up

  • Errata (April 2018), page 63: Scenario 3's first paragraph under Set-Up reads as follows: "During battlefield Set-Up, a Blast (3) Template (or marker of the same shape and size) is placed at the center of the battlefield to represent the Open Grave. The Open Grave is an Objective Marker and a Terrain Feature with the Does Not Block Line of Sight, Light Cover, Rough, and Sunken keywords."
  • Before deployment, each player takes turns, beginning with Player A, placing two Objective Markers each (for a total of four) anywhere in No Man's Land, as long as they are not placed within 6" of another Objective Marker or table edge.
  • Objective Markers in this scenario have the Sunken keyword in addition to their normal keywords.

Primary Victory Condition

  • Models touching or within the Open Grave can spend 1 AP to attempt a PS Check. Success in this PS Check allows the model to take a Remains Counter. A model may only carry one Remains Counter at a time. If the model with a Remains Counter is killed, the owning player places a 30mm circular token somewhere in base contact with the model before it is removed. Other models may pick up a dropped Remains Counter by spending 1 AP while in contact with it.
  • Any model may spend 1 AP when in contact with the Objective Marker closest to their Deployment Zone and discard a Remains Counter they are carrying to gain 2 Victory Points.
  • After scoring, a player achieves Primary Victory if they have accumulated 10 Victory Points and the opponent has not. If both players have 10 or more Victory Points at this time, the player with more Victory Points is declared the winner. If both players have at least 10 Victory Points and are tied, the game is a draw.
  • Alternatively, the player with the most Victory Points at the end of 8 game rounds achieves Primary Victory.

Special Scenario Rules

  • Models cannot interact with the Open Grave until after the start of Round 2.

Scenario 4: Duel of Champions

The constant battle and hardship that the factions of Samaria are subjected to result in death and destruction, it's true… but those who survive rise to the top of their forces and become their leaders' champions. After weeks of mudslinging and challenges, two of these titans are meeting on the battlefield for the first – and likely last – time.

Set-Up

  • Before deployment, each player takes turns, beginning with Player A, placing three Objective Markers each (for a total of six) anywhere in No Man's Land, as long as they are not placed within 4" of another Objective Marker or table edge.
  • Objective Markers in this scenario have the Dangerous keyword in addition to their normal keywords.
  • After deployment, each player names one currently Deployed model their "Champion."

Primary Victory Condition

  • Players earn 1 Victory Point if their Champion kills an enemy model outside of that Champion's Deployment Zone; if this is within their opponent's Deployment Zone, they score an additional Victory Point (for a total of 2).
  • After scoring, a player achieves Primary Victory if they have accumulated 10 Victory Points and the opponent has not. If both players have 10 or more Victory Points at this time, the player with more Victory Points is declared the winner. If both players have at least 10 Victory Points and are tied, the game is a draw.
  • Alternatively, if one Champion's action, ability, or effect kills an opponent's Champion, the first Champion's player scores 5 Victory Points.
  • Alternatively, the player with the most Victory Points at the end of 8 game rounds achieves Primary Victory.

Special Scenario Rules

  • Models with the Infiltrate special ability cannot be deployed within No Man's Land as well as their normal limitations.
  • If a Champion is killed, the closest friendly model to where the model was removed during the following Preparation Phase becomes that player's new Champion.

Scenario 5: Ancient & Bloody Wasteland

The continent of Samaria has taken more lives than bullets or blades over the centuries, and certain areas have become so saturated with violence and death that the world itself seems to hunger for it. Two opposed forces on the warpath have clashed yet again, this time in a place that thirsts for blood as much as they do!

Set-Up

  • Before deployment, six Objective Markers are placed on the boundary lines of No Man's Land, three on one side and three on the other. These are placed on points 12" from the table edge, and on the point 12" between the first two.
  • Objective Markers in this scenario have the Dangerous and Xenosathic keywords in addition to their normal keywords.

Primary Victory Condition

  • When the game ends, each player scores 1 Victory Point for each increment of 100 points' worth of enemy models they have killed. Point totals are always rounded up to the next increment of 50.
  • The player with the most Victory Points at the end of 8 game rounds achieves Primary Victory.

Special Scenario Rules

  • Models are considered to be killed by the enemy force no matter what kind of game effect or action removes them from play. This includes Falling, Malfunctions, past ability effects, etc.

Secondary Objectives

Rules for Scoring Secondary Objectives

Each Secondary Objective is fulfilled in its own way based on their respective card, but there are generally three types of Secondary Objectives: Model Placement, Model Casualty, and Objective Interaction. While the cards themselves will explain how to score each Secondary Objective individually, there are some general rules that apply to each type no matter what the text might say on the card.

  • Model Placement Secondary Objectives are scored based on the physical location of the indicated models at the end of the game round. Models can be Prone, engaged, or on the higher points of a Terrain Feature with the Levels (x) keyword, so long as they are within the indicated area at that time.
  • Model Casualty Secondary Objectives are scored based on one or more models being killed, and sometimes other models reacting to that fact. It is important to note that some of these Secondary Objectives will require the casualty to take place at a specific time (during the first activation of the round, during a squadlinked activation, over the course of one model's activation, etc.), but unless it is noted specifically – any cause (falling, Malfunction, special ability, etc.) for the enemy model(s) to be removed as a casualty counts as the opposing force "killing" it. The idea being that the enemy model would not have been doing whatever it was that killed it if it were not for the conflict against the opponent – models do not die from old age in Dark Age!
  • Objective Interaction Secondary Objectives are scored by interacting with the Objective Markers on the battlefield in some fashion. Models that are in contact with the Objective Marker(s) are not necessarily within them for Terrain keyword purposes. Some Secondary Objectives will indicate an Objective Marker that is closest to a point on the battlefield. In the case of equidistant Objective Markers, the player trying to score the Secondary Objective may choose which is "closer."

The following section contains a collection of cards for creating a Secondary Objectives Deck for use in Dark Age games, as well as the details on how to correctly score some of them. It should be noted that this list is not designed to be complete or finite, and more Secondary Objectives could be added in products, events, and publications in the future.

2017 Secondary Objective Card Master Rules List

(The card list reproduces the 2017 Secondary Objectives Deck. Card titles are in bold; "Objective" is the card's main text and "Special" its additional text.)

Grisly Reminder

  • Objective: Reveal this Objective when an enemy model is killed by a Melee Attack. Give the model that killed it 1 Head Counter. While in contact with an Objective Marker, this model may spend 1 AP to discard its Head Counter to complete this objective.
  • Special: Immediately discard this Objective if the model carrying the Head Counter is killed.

Burn It Down

  • Objective: Reveal this Objective at any time, and then select 1 Objective Marker. Friendly models may attack that Objective Marker, treating it as an enemy model for all purposes. This Objective is completed when the selected Objective Marker has been reduced to 0 HP (it is not removed from the battlefield).
  • Card note: Objective Marker stats: Defense 10 | Armor 14 | HP 3. This Objective Marker is not affected by Special Abilities or Weapon Abilities.

Dead Drop

  • Objective: Reveal this Objective at any time. Friendly models may spend 1 AP while in contact with the closest Objective Marker to your Deployment Zone to gain 1 Bomb Counter. This Objective is completed when a model with a Bomb Counter spends 1 AP while in contact with the Objective Marker closest to the enemy Deployment Zone.
  • Special: Bomb Counters are discarded if the model carrying them is killed. This Objective awards 2 Victory Points when completed.

Revenge

  • Objective: You must reveal this Objective when your next friendly model is killed. Give the model that killed it 1 Revenge Counter. This counter cannot be removed. This Objective is completed when the model with the Revenge Counter is killed.

Advance

  • Objective: Have all remaining friendly models in No Man's Land at the end of any round.

Patrol

  • Objective: End the round with friendly models in contact with 3 different Objective Markers.
  • Special: This Objective awards 2 Victory Points when completed.

Scavenge Supplies

  • Objective: Reveal this Objective at any time. Once per model's activation, friendly models may spend 1 AP while in contact with an Objective Marker to gain 1 Supply Counter. This Objective is completed when friendly models have a total of 4 or more Supply Counters at the end of any round.
  • Special: Supply Counters are discarded if the model carrying them is killed.

Call to Glory

  • Objective: 1 friendly model, during its activation, kills 1 enemy with a higher Point Value.

Infiltrate

  • Objective: End the round with 1 or more friendly models in an enemy Deployment Zone.

Claim Territory

  • Objective: Reveal this Objective at any time. Friendly models may spend 1 AP to place 1 Claim Counter on an Objective Marker they are in contact with. This Objective is completed when 3 Objective Markers have your Claim Counters on them.

Assassination

  • Objective: Kill 1 (and only 1) enemy model this round with your model's actions.
  • Errata (2018 FAQ/Errata, Assassination card): the card's text should read: "Kill 1 (and only 1) enemy model this round with your models' actions."

Bounty Hunter

  • Objective: Kill 1 enemy Character.
  • Special: If the enemy does not currently have a Character in their force, you may instead kill 1 enemy model with the highest Point Value.

Cull the Weak

  • Objective: Kill the lowest Point Value enemy model in play.
  • Special: If there are multiple enemy models with the lowest Point Value in play, this Objective is completed if ANY of those models are killed.

Surprise Attack

  • Objective: Kill 1 enemy model that has not yet activated this round.

Getting the Jump

  • Objective: Kill 1 or more enemy models with the first model to activate of any game round.

Bully

  • Objective: 1 friendly model kills 2 or more enemies with lower individual Point Values in 1 activation.

Waste No Moment

  • Objective: End the round with all remaining friendly models in contact with Objective Markers and/or engaged with enemy models.
  • Special: This Objective awards 2 Victory Points when completed.

Annihilation

  • Objective: Kill 3 or more enemy models this round.

No Mercy

  • Objective: Kill 1 or more enemy models currently prone or bearing a Dying Counter or Regeneration Counter.

Salt and Ruin

  • Objective: Reveal this Objective at any time. Friendly models may attack the 3 Objective Markers closest to the enemy Deployment Zone, treating them as enemy models for all purposes. This Objective is completed when the selected Objective Markers each have suffered at least 1 HP in damage (since revealing this Objective; Objective Markers reduced to 0 HP are NOT removed from play).
  • Card note: Objective Marker stats: Defense 10 | Armor 14 | HP 3. This Objective Marker is not affected by Special Abilities or Weapon Abilities.

Templates

The templates and counters are printed at the back of the book for photocopying and cutting out. They are: the Blast (1), Blast (2) and Blast (3) circular templates; the Spray template; the Stream template; and a sheet of universal counter tokens. The printed sheets carry no dimensions in text; use the printed templates as they appear on the sheet.

  • Special Abilities: These represent a model's unique skills, talents, and traits. Each Special Ability has its own specific rules that will be noted on the back of the model's Stat Card. For more on Special Abilities, see the relevant section later in this book.

  • Squadlink (x)(y): Models with the same Squadlink keyword listed here can join together when activating. This is known as Squadlinking, and is covered in greater detail later in this book.

  • Base Size: This represents the base the model should be fielded on. A model must be on its correct size base to be legal for play. It should be noted that Base Size has no bearing on Model Size.

  • Point Value (PV): A model's Point Value is used when creating a Force.

  • Size: Each model and many terrain features in Dark Age use Size to indicate the physical space they take up. Size ranges from Small – representing tiny creatures or obstacles about the size of a human child or large canine – to Gigantic, which indicates models and features that tower over common folk and dwarf other models on the battlefield. Size is used to determine Line of Sight, Cover, and modifies several game effects. Sizes include, in ascending order: Small (S), Medium (M), Large (L), Huge (H), and Gigantic (G).

  • Availability: This indicates the maximum number of a particular model that can be included in a force, and is dependent on the points level you are playing. The first number [x] indicates the maximum number of a particular model that can be included when playing a game for each full allotment of points you are allowed equal to the next number.

    Example 1: Model A lists an availability of [2]500, you may include up to 2 of that model in games of up to 500 points. If playing 1000 points, you could include up to 4 of that model.

    Example 2: Model B lists an availability of [2]500. If playing a game at a points level of 750, you could only include [2] of that model, as you have not reached double the allotted 500 point increment on the Stat Card.

    Note that most Availability increments will be based off of 500 points. So usually you will be allowed to take the listed allotment of that model at 500 points and 750, twice that amount in games of 1000 points, and so on.

    Models with an Availability of [C] are Characters. Only 1 of each Character may ever be included in a force, regardless of game size. Note that some Characters have multiple versions; in this case, these models are still considered the same Character for Availability.

    Example: Saint Mary: True Believer and Saint Mary: Herald of Vengeance are the same Character, meaning that a force could only include 1 of these versions, never both.

    Note that Availability is based on a model's specific Model Name, but special Limited Edition (LE) versions of models that are released as promotional miniatures or special edition products are considered to count for the Availability of the non-LE version of the same model.

    Example: Dragyri Ice Caste Blizzards are Availability [3]500. This means that by purchasing and fielding Leuedai, Ice caste Blizzard (LE) takes up one of those 3 available Blizzards – and is not in addition to them, despite her different Model Name.

  • Vine Curtains:
  • Water Storage Tower: Size Gigantic, Climbable, Levels (2), Impassable, Heavy Cover