RulesPal
Chat
Rulebook
Circuitry thumbnail

Circuitry

Circuitry Rulebook

Table of Contents

Table of Contents

  • Contents
  • Aims & Overview
  • Set Up (45s - 1min)
  • Rules of Play
  • Adding Circuit Cards
  • Movement & Wrap-Around
  • Gaining Charge
  • Delivering Charge
  • Action Cards
    • Rotate
    • Swap
    • Flip
    • Slide
    • Force + Movement Cards
    • Portal
    • Portal + Force
    • Inhibit
    • Free
    • Exchange
  • Advanced Play
    • Multiple Charge
    • Alternative Use of Charge Points
    • Team Play (Co-op/Comp)
  • More Sophisticated Set Up and Additional Turn Rule
  • Rules for Restricted Card Usage
  • Single Player Puzzles
    • Single Player Puzzle Mode
    • Puzzles

Contents

  • Instruction & Puzzle booklets
  • An assortment of MINI cards: action cards (green backs), action/movement cards (gold backs), & charge cards (black backs)
  • 30 double sided CIRCUIT cards (numbered 1-30)
  • 6 coloured pawns

Aims & Overview

The aim of the game is to build and manipulate a circuit board in such a way as to be able to move your coloured pawn to its associated charge point, thereby gaining charge. Once you have charged your pawn you must deliver the charge back to the black MASTER node located on the flip side of circuit card #1 to win the game. By visiting its charge point, a pawn gains charge. The orange pawn and its associated charge point (circuit card #4) are shown as an example, and the orange pawn returns its charge via the orange NODE to the black MASTER NODE to win the game.

By placing CIRCUIT cards directly above or below one another, or directly to the side, one can extend the pathways of a circuit-board and create the game space in which the game takes place.

The board diagram labels the following parts:

  • Pathway Node
  • Passing Point Node (With Portal)
  • Passing Point Node
  • Pathway
  • Card Number
  • Charge Point
  • MASTER Node

To aid you in your task of winning the game, a variety of movement, action, and charge cards can be collected and played, allowing you to change the circuit board's pathways, or force your opponents to move when they don't want to.

You could just blindly charge forth, but the board changes as opponents look to frustrate your progress and hasten their own. So, perhaps it's better to bide your time and gather as many resources as possible before committing to a movement.

The component groups shown on the overview page are: Charge MINI cards; Selectable action MINI cards; Movement MINI cards; and Random action MINI cards.

Set Up (45s - 1min)

  1. Find CIRCUIT card #1 and place it centrally, number side up, between all players.

  2. Locate CIRCUIT cards #2-7. These are CHARGE POINT cards. Either shuffle and deal a single card from this selection to each player OR let players choose their own.

  3. All remaining cards from this selection are now removed entirely and remain unused for the remainder of the game.

  4. Each player now takes a pawn of the colour associated with the CHARGE POINT on their circuit card.

    Here in a 2 player game, the circuit cards selected have a light blue and orange charge point respectively, so the associated coloured pawns are taken and then placed on their respective coloured NODES on circuit card #1.

  5. Each player now places their pawn on the associated coloured NODE on circuit card #1.

  6. The remaining CIRCUIT CARDS (#8-30) are now shuffled and an additional 3 circuit cards are now dealt to each player, meaning that they should now have 4 circuit cards in hand (one of which has their charge point upon it). The remaining circuit cards are now removed entirely from the game.

  7. Place all gold backed MINI cards into their own deck and shuffle. Place this deck face down.

  8. Sort the green backed MINI cards into 6 piles with each pile consisting of the same action, and place face up.

  9. Set the black backed MINI charge cards face up to one side.

SET UP COMPLETE!

Rules of Play

  1. Play proceeds in turns clockwise, from a designated first player.

  2. At the beginning of every turn a player chooses 2 mini cards of any combination of movement and/or action. Any selected combination of 2 mini cards is acceptable.

  3. Movement and action MINI cards may be played on the turn in which they are received OR may be banked and played on a subsequent turn. There is no lower or upper limit to the number of movement or action cards that one may play during a turn. Moreover, movement and action cards can be played in any order one wishes to do so.

  4. Once a gold backed MINI card is played it is placed on a discard pile.

  5. Once all gold backed MINI cards have been taken, the discard pile is turned over and used as a new deck.

  6. Once a green backed MINI card is played it is placed on a discard pile. As soon as all of the sorted piles reach zero then the green backed MINI discard pile is turned over and becomes 'active'. Any green backed MINI cards must now be drawn from this deck. Once the discard pile is active, played green backed MINI cards are returned to the sorted area and are continued to be returned there until the active discard deck reaches zero, at which point players may now select from the sorted piles. In this way the game will go through periods where players can choose what action cards they want and then periods when they can't.

  7. In addition to playing movement or action cards, a player [should they still be in possession of circuit cards] may play a circuit card - again at any point during their turn. (E.g. a player may play a movement card, an action card, then a circuit card and then subsequent movement and action cards etc. all in the same turn - ORDER DOES NOT MATTER). Unlike other options, the playing of a circuit card to extend the circuit board is limited to 1 per turn.

  8. Once a player has finished all of the things that they wish to do [which may be absolutely nothing] then they say or indicate that they have finished their turn and the turn passes to the next player.

Adding Circuit Cards

When playing a circuit card, it must always connect to the circuit-board in play.

Any action using a circuit card must always maintain the circuit-board as a whole unit (i.e. it cannot split it into 2 distinct areas).

The diagram shows a game already in play. The grey rectangles denote where a circuit card can next be played to extend and develop the circuit-board.

Movement & Wrap-Around

A pawn may not move over another pawn, nor across the black master node.

Movement occurs from NODE to ADJACENT NODE and costs 1 movement card. Colour of movement card does NOT matter. Multiple movement cards can be played in a single turn (at once, or played and interrupted by an action card and then more played etc.).

The circuit board operates on a wrap-around structure as shown in the diagram. Movement off the board via a letter links to movement onto the board via the same letter (usually on the opposite side - however, see complex diagram p15).

For example: On a different board set up, player 2 (light blue pawn) plays 2 movement cards which allows the light blue pawn to move via wrap-around (A) to the green NODE (1 movement) and then again via wrap-around (B) to the dark blue NODE (second movement).

Player 2 plays 2 movement cards to move their pawn via wrap-around a distance of 2 NODES.

NOTE: the coloured nodes on the movement cards have no bearing on moving. (I.e. 1 movement card - regardless of colour - provides a movement from one NODE to any adjacent NODE), unless INHIBIT has been played (see p26). [Editor's note: the printed cross-reference reads p26; the Inhibit card is described under Action Cards below.]

For this more complicated layout: carefully study the following to ensure that you understand how wrap-around works.

Compare this diagram with the previous one. The orange charge point card has been slid down and thus affects the wrap-around.

Gaining Charge

A pawn of associated colour is on the adjacent NODE next to its CHARGE POINT.

A single movement card of the pawn's colour (or black) must be played to take the pawn into the CHARGE POINT AND return the pawn to the adjacent NODE. (I.e. the pawn never really 'rests' on the CHARGE POINT).

So in the diagram, the orange player has their pawn as shown, they play a single orange (or black) movement card, receive a single charge and the pawn is now again on the adjacent NODE next to the CHARGE POINT.

Delivering Charge

To deliver charge one must approach the black master node via the node associated with one's pawn's colour.

If playing advanced rules where multiple charges can be delivered then for any single (non final) charge to be delivered, the use of 1 movement card of any colour is required.

To deliver multiple charge AND/OR win the game (i.e. the final charge to the master node is being delivered) then a BLACK NODE MOVEMENT MINI card is required.

Action Cards

REMEMBER: no actions may be performed on circuit card #1.

Rotate

Rotate allows any circuit card to be rotated by 180 degrees, regardless of whether it is occupied by pawns or not.

Swap

Swap allows the player to swap any 2 circuit cards that make up the circuit-board. The cards must stay in their original orientation and be free of pawns.

Flip

Flip allows the player to flip any card over, provided that it is free of pawns. The flip must occur along the longest axis of the card (see diagram). Note when Circuit Card #1 becomes free of pawns it may be flipped across either axis, the choice of which is left to the player who is the last to leave.

Slide

Slide allows a player to slide any edge card of the circuit-board along/around a single outside edge of another circuit card, provided that in so doing the circuit-board is not split into 2 distinct and separate regions. Pawns may occupy the card being slid.

The diagram shows all of the possible 'slide' moves for all of the circuit cards in this set-up that are allowed to slide.

Note that sliding any of the other circuit cards will cause the play space to separate into 2 distinct, non connected, areas.

Force + Movement Cards

Force + movement cards: allows a player to force an opponent's pawn to an adjacent NODE or further, dependent upon the number of movement cards used.

NOTE: the movement cards must have a BLACK NODE or be of the same colour as the opponent's pawn.

This play will force any opponent's pawn to an adjacent NODE.

Either of these 2 plays will force the dark blue pawn to move a distance of 2 NODES.

Portal

Portal allows a player to 'jump' from any NODE to a portal NODE provided they have the corresponding coloured movement card (or Black) for the portal they are jumping to.

Portal + Force

Portal + force: allows a player to forcefully portal an opponent's pawn. It requires the use of 2 movement cards. One, the colour corresponding to the opponent's pawn, the second corresponding to the colour of the portal node to which the pawn is being forced. This combination may be played with additional movement cards as described above under Force + Movement Cards.

Inhibit

Inhibit can be played by any player at any time EVEN when it is not their turn. The action card is played against a player and restricts that player's movements such that they may only move onto NODES if they have a matching coloured NODE (or Black) on their movement card. In addition, an inhibited player may NOT use portals.

The restrictions of inhibit can be removed either by a free action card OR by expending a unit of charge, if one is carried. Alternatively, inhibit expires after 3 turns - i.e. at the beginning of the 4th turn of the player who has been inhibited, the player is now free.

Free

Free removes the restrictions imposed by inhibit.

Exchange

Exchange allows a player to take 1 unit of charge from an opponent's charged pawn provided that they occupy adjacent NODES. The opponent's pawn effectively acts as a charge point.

In advanced play - co-op/comp mode, exchange allows a player to give ANY amount of charge to another player's pawn provided that they occupy adjacent nodes.

If charge is removed from a player then the colour of the charge is changed - i.e. the charge cards are simply representative of which pawn is carrying charge. Charge itself is not colour associated. However, in advanced play, to keep track of where a charge has come from, then keeping the charge card associated with the colour of the node it has been acquired from can be useful.

Advanced Play

Once players are familiar and confident with initial game play then advanced play options may be implemented. Amongst additional rules to make strategic play more sophisticated, these options include co-op/comp play and the use of multiple charges to win the game.

Multiple Charge

Instead of a single charge required to win the game, the amount of charge required can be agreed at the outset. If implementing a requirement for multiple charges, then players should adopt the following changes:

NOTE for gameplay to work slight adjustments have to be made to the rules regarding charging and delivery:

If a player is gaining charge/multiple charge from their own charge point then any movement card per charge accrued is acceptable. If however they have a movement card which is black or of their associated colour then they may accrue multiple charges at once.

If a player is gaining charge from an opponent's charge point then they must use a black or a colour movement card associated with the opponent's charge point.

For delivery of multiple charges see p18.

Alternative Use of Charge Points

Players may accrue 1 single charge from any other player's charge point but must deliver this to the MASTER NODE before taking another single charge from any of the other player's charge points. They are, however, free to gain additional multiple charges from their own charge point at any time.

Team Play (Co-op/Comp)

With 4 or 6 players, players team up, working together to try to beat the opposing team(s). In this instance, players that team up should not sit next to one another but be evenly spaced around the group. Players may discuss tactics and freely exchange any movement or action cards but not charge or circuit cards. Charge can be transferred via exchange actions (see p25).

More Sophisticated Set Up and Additional Turn Rule

At set up, prior to the first turn, players pass their circuit card with their charge point to the player sitting to their right. If implementing this change then the following rule must also be implemented:

Players MUST play a circuit card every turn until they no longer have any in hand.

Rules for Restricted Card Usage

A maximum of six mini cards only are allowed to be played during a player's turn.

A maximum of 8 mini cards only are allowed to be held at any one time. This includes charge cards, where the amount of charge is representative of the same number of mini cards. Once a player reaches their maximum of 8 mini cards they may continue to draw from the selection piles and movement deck but must make a decision regarding what to discard back to the respective piles.

Single Player Puzzles

Source: the official "Single Player Puzzles" booklet (Blood Moon Games Ltd, © 2021). Puzzle set-up diagrams are not reproduced.

Single Player Puzzle Mode

Just as in the main game, the aim of the puzzle mode is to get to the associated charge point and then return to the MASTER NODE via the colour NODE of the designated pawn(s) in play. For example here is a typical set-up with the green pawn having to charge and return to the MASTER NODE.

NOTE: All the rules of movement and action cards from the main game remain the same* & each action is limited to 6 uses.

For each puzzle you are challenged with a set of restrictions - usually no further circuit cards are allowed and a limit is stated regarding the use of movement cards and actions. For the set-up on the previous page the challenge is to gain charge and return it to the MASTER NODE using a maximum of 3 ACTIONS & 10 MOVEMENTS - the solution with notes is shown below:

  • Card 11 is flipped and the pawn moves via wrap-around to the dark blue node. Card #1 now free of pawns automatically flips. *NOTE for puzzles this is always along the longest axis.
  • The pawn continues along the circuit through the coloured nodes shown in the solution until it reaches its charge point and then charges.
  • Card 2 is rotated and the pawn moved to the light blue node on card 1. Card 2 is then flipped and the pawn moves along the circuit until it arrives at the master node.

Puzzles

Puzzle 1: Charge the orange pawn and return it to the MASTER NODE. Movement Cards: 7. Action Cards: 3.

Puzzle 2: Charge the green pawn and return it to the MASTER NODE. Movement Cards: 8. Action Cards: 3.

Puzzle 3: Charge the purple pawn and return it to the MASTER NODE. Movement Cards: 7. Action Cards: 6.

Puzzle 4: Charge the yellow pawn and return it to the MASTER NODE. Movement Cards: 9. Action Cards: 5.

Puzzle 5: Charge the dark blue pawn and return it to the MASTER NODE. Movement Cards: 7. Action Cards: 4.

Puzzle 6: Charge the light blue pawn and return it to the MASTER NODE. Movement Cards: 8. Action Cards: 4.

Puzzle 7: Charge the green pawn and return it to the MASTER NODE. Movement Cards: 6. Action Cards: 7.

Puzzle 8: Charge the green pawn and yellow pawn and return them both to the MASTER NODE. Movement Cards: 13. Action Cards: 7.

Puzzle 9: Charge the orange pawn and purple pawn and return them both to the MASTER NODE. Movement Cards: 14. Action Cards: 9.

Puzzle 10: Charge the light blue pawn and dark blue pawn and return them both to the MASTER NODE. Movement Cards: 16. Action Cards: 7.

Puzzle 11: Charge the light blue pawn and orange pawn and return them both to the MASTER NODE. Movement Cards: 16. Action Cards: 7.

Puzzle 12: Charge the orange pawn and return it to the MASTER NODE. Movement Cards: 6. Action Cards: 5.

If you can do any of the challenges using less mini cards (or using the same number of mini cards but with a different balance (e.g. fewer moves but more actions) then please submit your solutions for appraisal to our website and, should they pass the test, you'll have your details entered in the hall of fame. Should your solution subsequently be improved upon by others, or by yourself, then a new entry will be made but a historical record will be kept (i.e. your name will always be there). Also we will, from time to time, put up more puzzles so please check the website every so often.

Enjoy!

  • Once all players have left circuit card #1 then it is flipped over (along any axis, the choice being determined by the last player leaving) to display the MASTER NODE and cannot have any action applied to it what-so-ever (i.e. circuit card #1 remains in place, unmoved for the rest of the game). Note that in the special instance where the final pawn moves from circuit card #1 and wrap-around would bring them back onto circuit card #1 (see p13 for rules on wrap-around) then the card still flips AS the pawn moves FROM the card, meaning that the pawn will arrive via wrap-around on the reverse side of card #1.

    In this set-up the purple pawn is about to move and via wrap-around would come back onto circuit card #1. However, as the purple pawn leaves, circuit card #1 immediately flips (longest axis), thus the purple pawn arrives via wrap-around at the place shown (below) and so ends up on the orange node.