Catan: 3D Expansions – Seafarers + Cities & Knights thumbnail

Catan: 3D Expansions – Seafarers + Cities & Knights

Official rulebook: Catan GmbH · PDF

Catan: 3D Expansions – Seafarers + Cities & Knights Rulebook

Table of Contents

Table of Contents

Seafarers 3D Expansion Rules

In general, all of the rules in CATAN 3D apply to Seafarers 3D. This expansion modifies and adds to those rules as follows:

  • Ships
  • Ships and roads
  • Special victory points and CATAN chits
  • Gold fields
  • The pirate!

Game Components and Setup

In order to play this expansion, you will need to add some components from CATAN – 3D Edition (aka CATAN 3D). A list of these requirements, as well as an illustrated list of Seafarers 3D components, are in the Appendix.

The rules for setup can also be found on page 3 of the Appendix.

New Rules

Ships

1. Ship Building

In order to travel from one island to another, you need to build ships.

The ships in the game do not represent individual ships, just as roads do not represent actual carts and wagons. Instead, the ship pieces represent a shipping route you use to trade and travel between the islands.

Building a ship requires: lumber + wool

Like roads, ships can only be placed on a path. You may place ships on paths on the the sea or bordering the sea. You can never place a ship on a path between 2 land hexes. There can only be 1 ship OR 1 road on any given path (see the CATAN rules for details on paths and roads).

When you build a ship, you may place it:

  • Adjacent to any settlement or city you have on the coast.
  • Adjacent to any of your ships that are already on the board.

Example A: Red can build a ship on any of the paths marked in green but not on the path marked in red.

When you place ships, any amount of branching is allowed, just like when you build roads.

You cannot connect shipping routes (ships) to land routes (roads) directly. You must have a settlement or city where they meet. You can build ships and roads towards each other, but even if they both reach the same intersection, they are not considered connected until you build a settlement there. Unconnected routes do not count toward the "Longest Trade Route" (see page 3).

Example B: Orange cannot build a ship at the "X." Additionally, he cannot build a road onto the path marked in green until he builds a settlement at the intersection indicated by the orange arrow. Red's land and sea routes are not connected until she builds a settlement at the red arrow.

2. The Purpose of Ships

You build and place ships in much the same way as roads. They connect intersections. A chain of connected ships of the same color form a "shipping route." Shipping routes act the same way as roads for expanding your principality. You can build new pieces on any path that is connected to your network of roads and shipping routes. Count shipping routes when you calculate the "Longest Trade Route" (see page 3).

If your shipping route reaches a coastline, you can then build a new settlement on that coast. Of course, you must still obey the "distance rule" from CATAN, even if you are building on a new island. Once you build a settlement on a different island, you can use it as a base for further expansion, building new roads and ships.

Example C: Orange cannot build a new settlement on the intersection marked in red (it violates the distance rule). He can build 1 on the intersection marked in green.

3. Shipping Routes

A shipping route is either "open" or "closed." A "closed shipping route" is any unbroken line of ships that connects at least 2 of your settlements and/or cities. An "open shipping route" is any route that does not connect 2 of your settlements or cities.

Example D: Orange's shipping route is open. Red's is closed.

4. Moving Ships

The biggest difference between ships and roads is the ability of ships to sail from one location to another. Unlike road pieces, you may move your ships on the board. However, there are limits to how you may move them. You must obey these restrictions:

  • You may only move 1 ship per turn.
  • You may not move a ship during the turn you build it.
  • You may never move a ship that is part of a closed shipping route, even if that movement would not break the connection between the settlements/cities.
  • When you move a ship, you must obey all of the usual rules for placing a new ship.
  • You may only move a ship if one of its two ends is not adjacent to any of your other pieces.

Example E: Red has 2 open shipping routes, here outlined in white. The ends of those routes are indicated by arrows. Since Red didn't build those ships this turn, she may move either of them to a path marked in green. Additionally, the ship with the yellow arrow can move to a path marked in yellow, and the one with the blue arrow can move to a path marked in blue.

5. Ships During Starting Setup

Some players will wish to get a jump on the opposition by first exploring the oceans around Catan. These foresighted leaders may elect to place 1 or both of their starting settlements on the coastline. If you do so, you have the option of placing a ship, instead of a road, adjacent to that settlement. This strategy works well if you are planning rapid maritime expansion.

Ships and Roads

1. The "Longest Trade Route"

Because shipping routes are just as important as roads, players no longer compete for the "Longest Road." Instead, they compete for the "Longest Trade Route." The longest trade route is in all ways identical to the longest road (i.e., it is worth 2 victory points, etc.). However, players may count shipping routes (open or closed) as well as roads to determine who controls the longest trade route. The player with the longest connected line of roads and/or ships receives the "Longest Trade Route" special card and the 2 victory points for it.

Remember that you can only connect a road to a shipping route if there is a settlement or a city at the intersection where the two meet. Also, you can only count the single longest branch of a road and/or shipping route to calculate the longest trade route.

Example F: Red has the longest trade route of 6 segments. That route includes 4 ships (a closed shipping route) and 2 roads, which are linked by settlement "A". She also has an open shipping route of 2 ships starting at settlement "B." Red can connect this open route to her road if she builds a settlement on the intersection marked in green. The length of her trade route then increases to 8.

2. The "Road Building" Development Card

When you play a "Road Building" development card in a game of Seafarers, you have the option of substituting 1 or both of the roads with ships.

Place 2 new roads as if you had just built them.

Other New Rules

Special Victory Points and CATAN Chits

In this expansion, you can earn new types of special victory points in addition to those available in CATAN.

Many of the scenarios have goals other than expanding your principality. These goals can award a successful player special victory points. When you earn a special victory point, you receive a Catan chit. Each scenario describes the rules for how to acquire these chits.

When you earn a special victory point, you must place the corresponding Catan chit beside the settlement or city that earned you the chit. This allows all the other players to see how many points you have earned and how you gained those points.

Example: In Scenario 1: Heading for New Shores, Red earns 2 CATAN chits when she builds her first settlement on one of the smaller islands. This settlement is thus worth a total of 3 victory points: 1 for the settlement and 2 for the chits.

While CATAN chits act as special victory points in some scenarios, they can take on different meanings in other scenarios. For example, they might be used as markers or to help count results. Each scenario provides detailed instructions on how to use the CATAN chits for that game.

Gold Fields

Eager prospectors could discover gold on some of the islands around Catan.

The gold field hexes represent regions rich in gold nuggets. While there are no gold resource cards in the game, gold remains very valuable, indeed.

Whenever the number on a gold field hex is rolled, players collect resources for each adjacent settlement or city as normal, except they may select any of the regular resources (lumber, brick, wool, grain, or ore). They may choose any combination, following the limits of 1 per settlement and 2 per city.

The Pirate

Just as the lands of Catan are harassed by the robber, the sea is vulnerable to the scourge of the dreaded pirate who works the sea lanes looking for profit!

Place the pirate piece near the board before the game begins. The pirate can affect the game in 3 ways:

  1. If you roll a "7" during your turn, you may choose to move the pirate instead of the robber. Like the robber, place the pirate in the center of any hex you choose—except that you may only place it on a sea hex. You must then steal 1 random resource from any one player who has a ship adjacent to that hex! If a player has more than 1 ship adjacent to that sea hex, you are only allowed to steal 1 card from that player.
  2. If you play a "Knight" card, you now have the choice of moving either the robber or the pirate.
  3. Because sailors fear the pirate, they will not sail near its location. You may not place any new ships on the border of the hex the pirate is on. In addition, no ship may be moved away from the pirate if it is on the border of the hex in which the pirate is sailing.

Note: In CATAN – Seafarers, certain scenarios have no desert hexes. In such cases, start the robber off the board (just like the pirate).

Cities & Knights 3D Expansion Rules

Overview

You have time to prepare to face this danger. The strength of the barbarian army always corresponds to the number of cities on Catan. You and your fellow Catanians must gather a group of knights at least as strong in order to repel the barbarian threat.

If you defeat the barbarians, the danger is abated for the moment. However, if the knights of Catan are too weak, the barbarians sack a city and reduce it to a settlement.

The barbarians prey on the weak. Whoever contributed least to the defense of Catan will bear the burden of the destruction. Don't put your fate at risk – raise knights to defend the island!

Aside from this external threat, players compete to build three great metropolises. To build a metropolis, you must improve your cities. A metropolis is worth 2 additional victory points (VPs).

You can improve your cities along 3 possible categories using a new type of resource in the game - commodities (cloth, coin, and paper). Commodities are produced at cities that border certain terrains. Trade improvements (yellow) require cloth. Politics improvements (blue) require coin. Science improvements (green) require paper. If you are the first player to make all 4 improvements in a single category, you receive the metropolis upgrade.

Improving a city provides benefits. The more improvements it has, the more likely you are to receive new progress cards. These cards provide strong benefits and effects on the game. You get these cards when someone rolls the appropriate combination of the red die and the event die.

To get you moving quickly on all these improvements, the game starts you with 1 settlement and 1 city.

Game Components and Setup

In order to play Cities & Knights 3D, you will need most of the components from CATAN – 3D Edition. A list of these requirements, as well as an illustrated list of Cities & Knights 3D components, can be found in the Appendix.

Before you read the rest of these rules, go to page 3 of the Appendix to learn how to prepare the game board. The Appendix will also tell you how to do the initial player setup which varies slightly from CATAN. Once you have completed the setup, you can return to these rules.

If questions about particular progress cards arise during play, you can refer again to the Appendix for a full description of each card.

New Rules

Turn Overview

On your turn, perform the following three phases in the order listed:

  1. Production Phase

    • Roll all 3 dice.
    • Resolve the results of the event die. The event die shows which event occurs. The red die shows which city improvements produce progress cards.
    • Collect resource and commodity cards based on the red and yellow dice roll.

    Important: You can only play the "Alchemist" progress card before the production dice roll. It is the only progress card that you can use before the dice are rolled and the results resolved. You cannot build or trade before production.

  2. Trading, Building, and Action Phase

    You may do any or all of these actions in any order:

    a) Trade resources and/or commodities with other players and/or the supply

    b) Build:

    • Roads, settlements, and cities (as in CATAN)
    • NEW: City walls
    • NEW: Basic knights, activating and promoting them as desired
    • NEW: City improvements

    c) Play any number of progress cards, even cards obtained on that turn

    d) Perform actions with your knights:

    • Move your knights
    • Displace knights
    • Chase away the robber
  3. End your turn

    • Pass the dice to the player on your left. They become the active player and start a new turn.

The Turn in Detail

1. Production Phase

Begin your turn by rolling all 3 of the dice. The dice roll results must be resolved in a specific order. Depending upon the combination of dice, different results are possible:

  1. Ship. Move the barbarian ship along the barbarian track 1 space closer to Catan's shore. When the ship reaches the last space on the track, the barbarians attack Catan (see Attack of the Barbarians on page 8).

  2. Progress Cards. Announce the color of the gate (blue, green, or yellow) and the number on the red die (e.g., "Yellow - One."). All players check to see if they are eligible to draw progress cards.

    • To be eligible, the number on the red die must appear on your flip chart in the corresponding color section (see example).

      Example: After rolling the dice, the event die shows a yellow gate and the red die shows the number "1." The active player announces "Yellow - One." Any player whose yellow city improvement chart is at stage 1 or higher can draw 1 yellow progress card.

    • Each eligible player draws the topmost card from the progress card stack that matches the color on the event die. Start with the active player and continue clockwise. You may look at your cards, but keep them secret from your opponents until you play them. You may never have more than 4 progress cards in your hand (see Progress Cards on page 6).

  3. Production. Add the red and the yellow dice together to determine which hexes produce.

    • Each settlement produces 1 resource card as usual.
    • Each city produces 2 cards. The specific cards produced are determined by the type of terrain rolled (see the chart below).

    Note: You are not allowed to substitute production. You must take 1 of each, never 2 of one and 0 of the other. Also, commodity cards go in your hand. They count when a "7" is rolled and may be stolen by the robber.

    City Resource Production

    A city on a:Produces
    Pasture1 wool + 1 cloth
    Hills2 brick
    Forest1 lumber + 1 paper
    Fields2 grain
    Mountain1 ore + 1 coin

    These terrains produce 1 resource + 1 commodity: pasture, forest, and mountain. These terrains produce 2 resources: hills and fields.

  4. Rolling a "7" and moving the robber. In Cities & Knights, you cannot move the robber until after the barbarians reach the island of Catan for the first time. Until then:

    • If you roll a "7," all players must check if they are holding too many cards and discard as usual. However, you do not move the robber from the desert and you cannot steal a card from another player.
    • You are not allowed to move the robber by playing any progress cards (like the "Bishop") or by performing knight actions. The robber stays in the desert, no matter what.

    It is possible for you to roll a "7" and a ship on the event die that causes the barbarian ship marker to reach Catan on that turn. Since the barbarian attack gets resolved first (step 1), you are allowed to move the robber for the first time in this case.

2. Trading, Building, and Action Phase

Trading

The rules for trading resource cards in CATAN remain unchanged. They also apply to the new commodity cards. Commodity cards can be traded with other players or the supply. For trading purposes, these cards are interchangeable.

  • Progress cards may never be traded at any time.
Building

As in CATAN, you can build roads, settlements, and cities on your turn – nothing changes.

Cities & Knights adds new things that you can build:

City Walls

Building a city wall requires: 2 brick

To build a city wall, you must pay 2 brick to the supply. Place the city wall under any city you own on the board. There are three restrictions on the placement of city walls:

  • You may only build city walls under cities–never under settlements.
  • A city can only have 1 city wall.
  • If you lose a city with a wall, the city wall is also destroyed. Remove both from the board and put them back in your supply. They can be rebuilt.

Important: You are limited to the 3 city walls in your supply. You cannot build more than that.

Each city wall you build increases the number of cards you can safely hold in your hand by 2 when a "7" is rolled.

Example: If you have 2 cities, each with a city wall, you may safely hold up to 11 cards in your hand without having to discard half of them when a "7" is rolled. If you have 12 resource cards in this case, you must discard 6 of them.

Knights

Knights have three strength levels:

  • A basic knight has 1 strength point (1-point banner).
  • A strong knight has 2 strength points (2-point banner).
  • A mighty knight has 3 strength points (3-point banner).

Knights have two activation states:

  • A knight without a helmet is inactive. An inactive knight cannot take actions.
  • A knight wearing a helmet is active. An active knight can take actions.

Building a knight requires: 1 wool + 1 ore

To build a knight, you must pay 1 wool and 1 ore to the supply. You can only build basic knights. To improve their strength, you must promote them (see Promoting a knight on page 5). Here are the general rules for knights:

  • New knights are placed on any unoccupied intersection connected to your roads.
  • New knights always start inactive.
  • The distance rule does not apply to knights.
  • If your knight occupies an intersection on an opponent's road/trade route, that knight interrupts the route. Your opponent cannot build a road adjacent to that intersection. Nor can they build anything on that intersection.
  • A knight interrupts a road/trade route if it stands on an intersection within an opponent's road network. This affects Longest Road/Longest Trade Route count.

Example: Red can choose 1 of the 4 intersections to place her new knight. Red chooses intersection "A." This placement blocks Blue's road. Only Red can build a road on the empty path. Had Red placed her knight on intersection "B," it would have interrupted Blue's road count.

Activating a knight

Activating a knight requires: 1 grain

In order for a knight to take an action, it must be active. To activate a knight, pay 1 grain to the supply, then place a helmet on the knight.

  • The strength of the knight does not affect the activation cost.
  • You may activate a knight on the same turn you build it.
  • A knight cannot perform actions on the turn it is activated (see Knight Actions on page 7).

Promoting a knight

Promoting a knight requires: 1 wool + 1 ore

You can increase the strength and effectiveness of your knights by promoting them. To promote a knight, you must pay 1 wool and 1 ore to the supply. When you promote a knight, return it to your supply and replace it with a knight one level stronger. The new, stronger knight must be placed in the same location as the knight you removed.

  • You may only promote a knight once per turn.
  • You may promote a basic knight on the same turn that you build it.
  • You may promote a knight in either state (active or inactive). Promotion does not change its state.
  • The cost to promote a basic knight to a strong knight, or a strong knight to a mighty knight, is the same. However, you may only promote a strong knight to a mighty knight after you have reached the Fortress city improvement (the third stage on the politics track (blue) of the flip chart).

Important: You only have 2 knights of each strength level. If both of your basic knights are on the board, you must promote 1 of them if you want to build another basic knight.

City Improvements

One of your most important considerations in Cities & Knights is the continued improvement of your cities. You use commodity cards to pay for these improvements. You may purchase improvements in all 3 categories, even if you own only 1 city.

Track your city improvements on your flip chart, which is divided into 3 separate categories, each with an associated color: Trade, Politics, and Science.

Each category has 5 stages. Each stage represents structures or civic improvements you've added to your cities, such as markets, cathedrals, or libraries. These improvements increase your chance of drawing progress cards. The more you improve, the greater your chances (see Progress Cards on page 6).

At the beginning of the game, open the flip chart cover to reveal the pages that show no improvements. They have a blank city icon in the upper left corner of each category.

The cost of an improvement is shown in the lower right corner of each flip chart page by a number of commodity icons.

The first improvement in each category costs 1 commodity card of the type shown. The second improvement costs 2. The cost of each subsequent improvement is again increased by 1.

Example: The market costs 1 cloth. Pay 1 cloth and flip down the trade section of your flip chart.

Important: There is one restriction on purchasing improvements. If you have no cities on the board (because the barbarians have pillaged your last city), you may not purchase any city improvements until you have built at least 1 city (see Attack of the Barbarians on page 8).

Category colors and commodities

  • Yellow is Trade: Cloth
  • Blue is Politics: Coin
  • Green is Science: Paper

Once you improve a category to its third stage, you receive benefits for the rest of the game:

  • Merchant Guild (yellow): From now on, you can trade commodities with the supply at a rate of 2:1. You can trade 2 commodities for 1 resource or 1 other commodity. The commodities you give to the supply must be of the same type, as usual. This advantage does not apply to resources.
  • Fortress (blue): From now on, you can promote strong knights to mighty knights. You must still pay to promote the knights.
  • Aqueduct (green): From now on, if you receive no resources from a production roll, you may take 1 resource or commodity of your choice from the supply. This even applies when a robber blocks your production. Exception: You cannot use this ability when a "7" is rolled.

The Metropolis

Building city improvements is also important if you want to have a metropolis (worth 2 VPs). There are only 3 metropolis pieces in the game, 1 for each category: trade, politics, and science. They are called the bank, the cathedral, and the theater.

  • If you are the first player to improve your city to the fourth stage in a category, place the corresponding metropolis piece on top of 1 of your cities on the board. If you are a subsequent player, you do not get the metropolis piece (there is only 1 metropolis piece for each category).
  • If you are the first player to improve your city to the fifth stage in a category, take the corresponding metropolis piece from the player who has it and place it on top of 1 of your cities (or keep it if you already have it). No one can take it from you for the rest of the game. Place the corresponding metropolis token in front of yourself to indicate this permanent status.

Example: Two turns ago, an opponent was the first to improve their city to stage 4 – Cathedral, placing the Politics metropolis piece on their city. Last turn, you improved to stage 4 – Cathedral but could not take the metropolis piece (you were not first). This turn, you improve to stage 5 – High Assembly. You take the Politics metropolis piece from the other player and add it to your city. This piece cannot be taken from you for the rest of the game.

  • A city with a metropolis is worth a total of 4 VPs (2 VPs for the city + 2 additional VPs for the metropolis).
  • A metropolis is immune to the barbarians. It can never be pillaged or reduced. However, the metropolis is counted when determining the strength of the barbarian army.
  • You may build more than 1 metropolis, but you must have a separate city for each metropolis piece. If you only have 1 city, and it is already a metropolis, you cannot improve the other categories beyond stage 3. If you want to improve one of these categories to stage 4, you must build another city.

Progress Cards

Progress cards replace the development cards from CATAN. You don't purchase progress cards like development cards; instead, you draw them with the right combination of event die and red die results.

Acquiring Progress Cards

You receive progress cards whenever you meet all 3 of the following conditions:

  1. Your city improvement flip chart must be at stage 1 or more in at least 1 category. A stage 1 improvement shows 2 red dice, the second stage shows 3, and so on.
  2. The event die result must show a city gate symbol that matches the color of one of your city improvements. Note: If you have improvements in all three categories, you have a chance to draw a progress card every time a city gate is rolled.
  3. The number on the red die, rolled at the same time, must match 1 of the red dice displayed on your flip chart in the corresponding category color.

If these 3 conditions are met, you may draw the top card from the corresponding progress card stack. If more than 1 player is allowed to draw on the same turn, each player draws in turn order, beginning with the active player.

Example: White rolls the dice. The results are a yellow city gate on the event die, a "3" on the red die, and a "6" on the yellow die. Blue has already built a merchant guild (yellow, stage 3, trade) and a town hall (blue, stage 1, politics). Since the merchant guild improvement shows a red die with a "3," Blue may draw a yellow (trade) progress card.

Playing Progress Cards

During your turn, you may play as many progress cards as you wish, in any order. All progress cards may only be played after you roll the dice (exception: the "Alchemist"). Below are some specific rules about the play of progress cards.

  • You may never hold more than 4 progress cards in your hand. If you draw a fifth progress card, and you cannot play it for some reason, you must discard 1 card of your choice. Place it facedown under the corresponding draw stack.
  • You may play a progress card on the same turn you draw it.
  • You may play progress cards between other actions you take on your turn.
  • If you draw a VP card, you must play it immediately. The "Spy" may not steal them, and they cannot be hidden in your hand. These cards do not count toward your progress card limit of 4 cards.
  • You cannot trade progress cards, nor may the robber steal them.
  • When you play a progress card, place it facedown under the corresponding draw stack. VP cards, however, remain face-up and in play.

Note: More detailed instructions about each specific progress card can be found in the Appendix.

Knight Actions

Knights are essential to victory. They serve you in 2 ways. First, they help protect Catan from the barbarians (see Attack of the Barbarians on page 8). Second, they can perform various actions during your turn. These are the general rules for knights:

  • Important: A knight can only act if it is active (helmet on) at the beginning of your turn.
  • Important: After any action, you must deactivate the knight (remove its helmet).
  • Knights can only act on your turn during the Trading, Building, and Action Phase.
  • Each of your active knights can perform a maximum of 1 action per turn.
  • You can "reactivate" a knight (put a helmet on) during a turn in which it took an action. However, that knight cannot perform another action this turn.
  • To activate a knight, you pay 1 grain to the supply.

Here are the various actions that you may perform with an active knight:

Moving a Knight

You may move an active knight from one intersection to another. After movement, the knight becomes inactive. Moving a knight has the following restrictions:

  • Both intersections must be connected to each other by your own road network.
  • An intersection may only be occupied by 1 knight at a time.
  • A knight may move through any number of intersections that are occupied by your own pieces.
  • A knight may not move through an intersection occupied by an opponent's pieces (their knight or otherwise).
  • If you wish to build a settlement on an intersection occupied by 1 of your knights, then you must first move the knight. If you cannot move the knight (e.g., no empty intersection, knight not active), then you may not build at that intersection.

Example: Red may move their active knight from intersection "A" to either intersection marked with an arrow. That knight cannot be moved to "B" or "C," because Red does not have roads connecting "A" to these intersections.

Displacing a Knight

On your turn, you may move 1 of your knights to an intersection that is occupied by 1 of your opponent's knights. This is called displacing a knight.

  • You can only displace a knight if your knight is stronger. Thus, a mighty knight can displace a basic or a strong knight. A strong knight can only displace a basic knight. A basic knight can never displace another knight.
  • The owner of the displaced knight must move it from that intersection to another empty intersection. The new intersection must be connected to the old one by their own road network (Note: it cannot move through an intersection occupied by an opponent's pieces). The status of the displaced knight does not change (if it was active, it remains so).
  • If there is no empty intersection for the displaced knight to move to, it is removed from the board and returned to its owner's supply.
  • After you displace an opponent's knight, your knight becomes inactive.
  • You may not displace your own knights.

Example: Red moves her strong knight to the intersection indicated by the red arrow. It is allowed because Red's knight is stronger than Blue's basic knight (note the banners), and Red has a road that connects the 2 intersections. Blue must now move his displaced knight to "A" or "B," which are both connected by roads to his knight's original position. Blue moves his knight to "B." Note that "C" is not a connected intersection, so the knight cannot be moved there.

Chasing Away the Robber

You may chase away the robber with 1 of your active knights. Any knight will do, regardless of its strength. Your knight may only chase away the robber if the robber is on a hex adjacent to that knight.

The evicted robber is handled exactly as if you had played a "Knight" development card from CATAN. After you chase away the robber, deactivate your knight.

Note: You cannot chase the robber out of the desert until after the first barbarian attack.

Example: Red's knight can only chase away the robber from the gray hexes. To chase the robber away, Red moves her knight to intersection "A" or "B" and deactivates it. Red pays 1 grain to activate her knight again. On her next turn, Red uses this knight to chase away the robber.

Attack of the Barbarians

When the barbarian ship reaches Catan's shore (the last space on the barbarian track), the barbarians attack. All players contribute their active knights to defend Catan. Resolve the battle as follows:

Determine the Attacker's Strength

To determine the barbarian army's strength, count the total number of cities owned by all players (including metropolises). This total is the attacker's strength.

Determine the Strength of Catan's Knights

To determine the defenders' strength, add up the strengths of all the active knights (ignore the inactive ones). The strength of each knight is determined by its type: basic (1), strong (2), or mighty (3). Tip: Count the points on their banners.

This total is the defenders' strength.

Compare Attacker's and Defenders' Strengths

The side with the greatest strength wins the battle. If the attacker's strength is greater than the defenders' strength, the barbarians win. If the defenders' strength is equal to or greater than the attacker's strength, the knights win.

The Barbarians Win

The barbarians pillage 1 city belonging to the player with the weakest defenders. A pillaged city is reduced to a settlement (replace the city with a settlement). If the weakest defender has multiple cities, that player chooses which city to pillage.

  • The player whose active knights have the lowest combined strength is the weakest. If you contributed no active knights to the defense, you are automatically considered the weakest.
  • If the weakest player is protected (see Metropolis on page 6), the barbarians pillage the next weakest player.
  • If multiple players tie for weakest, the barbarians pillage 1 city belonging to each of the tied players.
  • Players who only have settlements (no cities) are considered protected. They cannot be pillaged and lose nothing.
  • Metropolises are always protected.
  • If a pillaged city has a city wall, the wall is destroyed as well.
  • In the extreme case where no players had active knights, all players lose a city.

Example: The barbarians attack!

  • Red and Blue have 2 cities each. Orange has only 1 metropolis. White has only 2 settlements. So the attacker's strength is 5 (4 cities + 1 metropolis).
  • Red, Blue, and White each have 1 active basic knight, and Orange has no active knights. So, the defenders' strength is 3.
  • The barbarians win (5 is greater than 3).
  • Orange is the weakest defender, but he only has a metropolis which is protected. So, the barbarians look at the next weakest.
  • Red, Blue, and White all tie for next weakest. But, White has no cities to lose, so they are protected. Red and Blue each lose 1 of their cities.
Special Cases

If you lose your last city, you still keep your city improvements. You can draw and play progress cards normally. However, you cannot build new city improvements until you have a city again.

If you lose a city and have 5 settlements on the board, temporarily treat the city as a settlement. Turn the city on its side to indicate its reduced status (remember that its VP value and resource production capabilities are that of a settlement). If you want to build a new city, it must be this one. Pay the cost to the supply and return the piece to its upright position. If the only city you have is this reduced one, you cannot build new city improvements until you repair it.

The Knights Win

Catan is saved! The player with the highest total strength of active knights (this will not always be the greatest number of knights) is declared the Defender of Catan!

  • Place 1 "Defender of Catan" card in front of the player. It is worth 1 VP.
  • If 2 or more players tie for the highest total strength of active knights, no one receives a VP card. Instead, the tied players each draw 1 card from the progress card stack of their choice. Draw these cards in player order.

The Barbarians Return Home

Regardless of the outcome of the attack, return the barbarian ship to its starting position on the track to begin a new journey towards Catan. All knights on the board become inactive (remove their helmets).

The Merchant

When you play a "Merchant" progress card, place the merchant figure on any terrain hex adjacent to 1 of your cities or settlements. As long as the merchant remains, you may trade the resource (not the commodity) that this hex produces at a rate of 2:1. All of the usual CATAN rules for 2:1 harbor trades apply to trades with the merchant.

Whoever plays another "Merchant" card (it could be you) may move the merchant figure to any hex adjacent to 1 of their settlements or cities.

Control of the merchant figure is worth 1 VP.

Commodities in Detail

Cities & Knights has 3 new, "refined" materials in the game. We refer to the 5 basic materials (lumber, brick, wool, grain, and ore) you already know from CATAN as resources. The 3 new materials (cloth, coin, and paper) are called commodities. In many ways, the commodities are treated the same as resources, but there are also some ways in which they differ. Here are the details:

  • Commodities are produced only by cities, and only from forests, pastures, and mountains.
  • Add any commodities you produce to your hand of resource cards. You count them toward your hand limit when a "7" is rolled. They may be stolen by the robber or lost as a discard.
  • You trade commodities just like any other resource.
    • You may trade them freely with other players.
    • You may trade them with the supply—4 of the same commodity for 1 of any other resource or commodity.
    • If you have a settlement or a city on a 3:1 harbor, you may trade 3 of the same commodity for 1 of any other resource or commodity.
    • In the same manner as above, you may also trade resources for commodities.
  • You need commodities to acquire city improvements.
  • Some progress cards specifically mention "resources" or "commodities." These cards can only affect the type of material they specifically mention.

Note: The backs of commodity cards are the same as the backs of resource cards. However, the border on the front is intertwined with ribbons that match the color of the commodity (gold for cloth, gray for coin, and green for paper).

Ending the Game

The first player to accumulate 13 or more victory points during their turn immediately wins the game.

Variants

Seafarers Variant

For some added fun, you can combine the Cities & Knights expansion with the Seafarers expansion! The best Seafarers scenarios to use are those that do not involve the exploration of hidden portions of the board (such as "The Fog Islands") or many small islands (such as "The Four Islands"). These types of scenarios make it very difficult to defend against the barbarians. Scenarios such as "Heading for New Shores" or "Through the Desert" both work very well. If you choose to play this "combo-expansion," here are some important rules:

  • All rules in Cities & Knights that concern roads also apply to ships.
  • When the barbarians attack, they are assumed to attack all the islands at once. Count cities and knights on all of them.
  • You may move your knights across the sea if your trade route (roads and ships) connects your knight's starting intersection to its ending position.
  • You may move a knight to an intersection of 3 sea hexes if you have a line of ships to that intersection (consider the knight as riding on an adjacent ship). However, you cannot build a new knight on such an intersection.
  • If your knight stands on an intersection that is bordered by the last ship of your shipping route, the shipping route is closed. You cannot relocate that ship because it would break your knight's connection to 1 of your settlements or cities.
  • If you interrupt an opponent's shipping route with a knight, this route is considered interrupted for purposes of calculating "Longest Trade Route" (just like with a settlement). In addition, that opponent may not relocate the ships bordering your knight.
  • You may use a knight on a sea hex intersection to chase away the pirate, just as you would chase away the robber.
  • The number of VPs needed to win the Seafarers scenario should be increased by 2.
  • Cities on gold fields only produce resources, never commodities.
  • You cannot place the merchant on a gold field.
  • The rules about not moving the robber before the first barbarian attack also apply to the pirate.

Nasty Variant (For Experienced Players)

If you want even more tactics in your Cities & Knights game, you should try this variant. It has only one small, but very consequential, rule change:

When the barbarian army attacks, all players decide in turn (starting with the active player) how many of their active knights they will contribute to defend Catan. Each player may choose to commit some, none, or all of their active knights.

This set of decisions may cause Catan to lose the battle (due to a shortage of knight strength), which would result in 1 or more players losing a city.

Only knights that are committed to the defense count toward the defenders' strength. Only committed knights are taken into account when determining who contributed the weakest force.

Be warned: Using this rule can make the game very nasty (and longer as well).

Knight-Errant Variant

This rule allows you to use 1 of your active knights to chase away the robber before rolling the dice on your turn. Your knight then becomes deactivated. This has the same effect as playing a "Knight" card before rolling the dice in CATAN.

Quick Start Variant

Many players, especially those new to the game, find it difficult to get started if a lot of "7"s are rolled and/or the barbarians strike early. For these players, or for players who want a friendlier game, use these rules:

  • If any player rolls a "7" during their first two turns, they should re-roll. Continue rolling until a result other than "7" is obtained. Beginning with the first player's third turn, all of the normal rules for rolling a "7" apply.
  • Do not roll the event die during everyone's first 2 turns. The barbarian ship does not move, and no player draws any progress cards during this time. Starting with the first player's third turn, roll all three dice and resolve them normally.

This variant is designed to give all players a chance to get "rolling" at the beginning of the game without being stymied by an early barbarian attack or by rolling a lot of "7"s.

Appendix: Voyages of Discovery

Standing on the coast, you look out across the boundless sea. Having tamed the wilds of your homeland, your heart yearns for greater adventures and more glorious challenges. Your people are ready to follow you, even into the unexpected dangers of the unknown. Nearby, seasoned dock workers are putting the finishing touches on your first great seaworthy ship. Soon you will leave the settlements behind to join the ranks of explorers and voyagers. Soon you will become one of the Catanian Seafarers!

Discover seafaring in Catan by embarking on a series of voyages from the history of Catan! You can find the destinations of these voyages in this Appendix. Experience the history of Catan for yourself!

This epic campaign consists of 8 scenarios:

  • Scenarios 1-4 use only the basic Seafarers rules. They are easier to play.
  • Scenarios 5-8 are more complex. Each has its own special rules.

Scenario 9 is intended for free play using your own ideas.

Seafarers Component List

Contents of Seafarers 3D

  • 30 Terrain Hexes: Gold fields x2, Sea x19, Forest x1, Hills x2, Pasture x1, Fields x1, Mountains x2, Desert x2
  • 44 Fog Tokens (for randomizing terrain in some scenarios)
  • 10 Harbor Tokens (for randomizing harbors in some scenarios)
  • 12 Sea Frames: 1-hex frame x2, 2-hex frame x2, 3-hex frame x6, End frame x2
  • 4 Sets of Ships in 4 Different Player Colors: 15 orange, 15 white, 15 red, 15 blue
  • 1 Pirate Figure
  • 10 Number Tokens
  • 50 CATAN Chits
  • 1 Harbor Marker: 3:1 x1
  • 4 Building Costs Cards
  • 1 Special Victory Point (VP) Card: Longest Trade Route. The first player to build a continuous route of at least 5 segments gets this card. Another player who builds a longer continuous route takes this card.
  • 5 Wonder Cards
  • 1 Rulebook
  • 1 Appendix

Components Required from CATAN 3D

  • 19 Terrain Hexes: Forest x4, Hills x3, Pasture x4, Fields x4, Mountains x3, Desert x1
  • 9 Harbor Markers: Lumber x1, Brick x1, Wool x1, Grain x1, Ore x1, 3:1 x4
  • 18 Number Tokens
  • 2 Dice
  • 4 Sets of Pieces in 4 Different Player Colors: 15 Roads, 5 Settlements, 4 Cities
  • 95 Resource Cards
  • 2 Card Trays
  • 25 Development Cards
  • 1 Special Victory Point (VP) Card: Largest Army. The first player to play 3 Knight cards gets this card. Another player who plays more knight cards takes this card.
  • 1 Robber Figure
  • 1 Rulebook
  • 1 Almanac

Assembling the Board

What You Need

CATAN – 3D Edition & CATAN – 3D Expansion – Seafarers

To play CATAN – 3D Expansion – Seafarers (aka "Seafarers"), you need several components from a copy of CATAN – 3D Edition (aka CATAN). The numbered Scenario sections that follow provide an overview and a detailed list of components you will need for setup.

Starting a Game

Choose a Scenario

Before you can play, you must first choose a scenario and gather the components that are listed in the Components manifest. Construct the board according to the illustration at the beginning of the scenario. The board and setup for each scenario may vary depending upon the number of players. These icons indicate which board is which.

Assemble the Frame

This game adds some new frame-styles to CATAN 3D. It adds 1-hex, 2-hex, and 3-hex frames, as well as end-frames. The main feature of these frames is the lack of a coastline that the CATAN 3D frames possess. This allows for more variable board setups.

Here's an example of how to fit them together: Assemble the frame for a scenario using only the frames provided in this expansion. Each scenario diagram shows which frame pieces you need and how to arrange them.

Place the Terrain Hexes and Harbor Markers

After you build the frame, place the terrain hexes exactly as shown in the scenario diagram. After you place the hexes, place the number tokens exactly as shown as well. Finally, place the harbor markers as shown.

Some scenarios depict a harbor with a red "?" icon to indicate random harbors. To place these harbors, take the cardboard harbor tokens and shuffle them face down (or draw them from a container). Randomly select these tokens one at a time and place the corresponding plastic harbor marker where the scenario diagram indicates a random harbor. Put the unused harbor markers away.

About the Scenarios

Unlike CATAN, when you play Seafarers you don't have to set up the board using the same basic shape every time. Instead, you can choose from any of the scenarios. Each offers a unique blend of challenges and opportunities for you to explore. All scenarios are presented in this format:

  • Name of Scenario. The name of the scenario is at the top of the page followed by a short summary and historical description of the scenario (in red italic text).
  • Scenario Diagram. The scenario diagram depicts the board setup. The areas outlined in dark blue show an area generally referred to as the Small Islands. The other area is generally referred to as the Main Island. The terrain hexes for these areas are generally listed separately to speed setup.
  • 1. Components. These tables show how many of each component you need to play the scenario.
  • 2. Preparation. If the scenario has any special instructions for preparing the game, they are explained in this section. Unless stated otherwise, the harbor markers used in each scenario are placed randomly using the harbor tokens as described above.
  • 3. Additional Rules. Any additional rules for the scenario, including rules about how to earn special victory points (VPs), are described here.
  • 4. Variable Setup. This section provides advice on how to vary the standard setup. After playing these scenarios, experienced players may want to experiment with scenarios of their own design.

When you need to randomize something, use a method agreeable to all players. (For example, if you need to randomize the number tokens, use a mug or cloth bag. If you need to randomize some harbors, use the corresponding harbor tokens).

Scenario 1: Heading for New Shores

After a long voyage, the explorers have reached Catan and built their first settlements. Harbors are built and new, seaworthy ships are being developed. Daring Catanians sail across the ocean. Before long, rumors begin that many smaller islands are out there at sea, not too far away—it is even said that gold has been found on some of them. Ships are fitted out and soon set sail to find gold on the islands.

1. Components

3-player game

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
Main Island – CATAN---3224314
Main Island – Seafarers9-------9
Small Islands – CATAN---111--3
Small Islands – Seafarers4-2-111-9
Total13-24445335
Number Tokens?345689101112Total
Main Island – CATAN111222122-14
Main Island – Seafarers-----------
Small Islands – CATAN-11---1--14
Small Islands – Seafarers--11-1-1--4
Total123323232122

Other components (3-player game)

  • CATAN Chits: 18x
  • Harbors: 5x 2:1 harbor markers, 3x 3:1 harbor markers

2. Preparation

Set up the game as shown in the appropriate diagram above.

3. Additional Rules

Setup Phase

Build your first 2 settlements with roads/ships on the main island (the big island), as described on page 7 of the CATAN 3D Almanac.

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to the settlement.

Pirate & Robber

Play this scenario with both the robber and the pirate. In a 3-player game, the robber starts on the hills hex marked with a "12." In a 4-player game, the robber starts in the desert. The pirate starts on the sea hex indicated on the diagram.

Special Victory Points (VPs)

When you build your first settlement on any small island, you earn 2 special VPs. Place 2 CATAN Chits beside the settlement to indicate its "first-built" status. These settlement are worth 3 VPs. Additional settlements you build on that island do not earn special VPs. Your settlement can earn "first built" VPs even if other players already have their "first built" settlement on that same island.

Ending the Game

The game ends as soon as a player reaches 14 VPs on their turn.

4. Variable Setup

First, set up the frames as shown above. Then prepare the main island and small islands separately as detailed below.

When preparing the islands, randomize the terrain hexes and number tokens as described on page 8 of the CATAN 3D Almanac. Maintain the locations of the harbor markers as shown on the maps above, but randomize the type of harbor using the harbor tokens as described on page 3 of the Seafarers 3D rules.

Main Island

Gather the terrain hexes, number tokens, and harbor markers listed in the 3- or 4-player charts and randomize them. Assemble the main island land hexes in the location shown on the map. Then place the main island sea hexes (the ones NOT in the blue-outlined area) in the frame.

Small Islands

Gather the terrain hexes and number tokens listed in the 3- or 4-player charts and randomize them. Then place the robber and the pirate as described.

Note: When doing a variable setup, you should not place red number tokens (6s and 8s) on adjacent hexes, nor should you place them on gold field hexes.

4-player game components (for Scenario 1 variable setup)

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
Main Island – CATAN-1-4334419
Main Island – Seafarers10-------10
Small Islands – CATAN--------0
Small Islands – Seafarers4-21221113
Total14125555542
Number Tokens?345689101112Total
Main Island – CATAN122222222118
Main Island – Seafarers----------0
Small Islands – CATAN----------0
Small Islands – Seafarers111111111-9
Total233333333127

Other components (4-player game)

  • CATAN Chits: 24x
  • Harbors: 5x 2:1 harbor markers, 4x 3:1 harbor markers

Scenario 2: The Four Islands

The Catanians quickly develop into experienced seafarers. One day they reach the "Four Islands" archipelago. Here too, fertile fields, lush pastures, and productive mines lure the intrepid Catanians. New settlements are quickly built. But soon the Catanians' curiosity spurs them onward. What will they find on the other islands? Since every faction wants to see all four islands, an exciting race for the few settlement sites begins!

1. Components

3-player game

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
All Islands – CATAN---4334418
All Islands – Seafarers15---11--17
Total15--4444435
Number Tokens?345689101112Total
All Islands – CATAN122222222118
All Islands – Seafarers---1--1---2
Total122322322120

Other components (3-player game)

  • CATAN Chits: 18x
  • Harbors: 5x 2:1 harbor markers, 4x 3:1 harbor markers

2. Preparation

Set up the game as shown in the appropriate diagram.

3. Additional Rules

Setup Phase

You may place your starting settlements (with roads/ships) on the same island or on 2 separate islands. Thus, at the beginning of the game you have 1 or 2 "home islands." All other islands are "foreign islands" to you.

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to the settlement.

Pirate & Robber

Play this scenario with both the robber and the pirate. The pirate starts on the sea hex indicated on the diagram. The robber starts on the hex with a 12 number token.

Special Victory Points (VPs)

When you build your first settlement on a foreign island, you earn 2 special VPs. Take 2 CATAN Chits and place them next to the settlement. That settlement is worth 3 VPs. Additional settlements you build on that island do not earn special VPs.

If you build on a second foreign island, your first settlement built there will similarly earn 2 special VPs.

If you manage to place a first settlement on a third foreign island, you again earn 2 special VPs.

Note: If you start the scenario with 2 home islands, you will only be able to earn 4 special VPs. If you start with only 1 home island, you may be able to earn up to 6 special VPs.

It does not matter if another player has already built a settlement on the island or if it is another player's home island. Each time you build your first settlement on a new island that was foreign to you, you earn the special VPs.

Example: Pete has built his 2 settlements on the island on the lower left. Now his ships reach the island on the lower right. He builds a settlement on this island and obtains 2 CATAN Chits, which he places under the settlement. From this settlement he then reaches the island on the upper right, builds his first settlement there, and obtains 2 additional VPs (CATAN Chits) for it.

Ending the Game

The game ends as soon as a player reaches 13 VPs on their turn.

4. Variable Setup

The contours and locations of the 4 islands should not be altered. Within these contours, you can completely randomize the terrain hexes and number tokens. However, you should make sure forest and pasture hexes don't get number tokens that are too unfavorable (for example: 2, 3, 11, and 12).

You can also randomize the harbor markers. Keep the locations of the harbors as shown above, but randomize the type using the harbor tokens.

Note: When doing a variable setup, you should not place red number tokens (6s and 8s) on adjacent hexes.

4-player game components (for Scenario 2 variable setup)

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
All Islands – CATAN---4334418
All Islands – Seafarers12--1111117
Total12--5445535
Number Tokens?345689101112Total
All Islands – CATAN122222222118
All Islands – Seafarers--11--111-5
Total123322333123

Other components (4-player game)

  • CATAN Chits: 24x
  • Harbors: 5x 2:1 harbor markers, 4x 3:1 harbor markers

Scenario 3: The Fog Islands

Other Catanian seafarers discover a new land they call "The Fog Islands." Near the island stretches a mysterious sea, mostly covered by a thick fog. Fearless seafarers who have ventured into the fog-shrouded ocean tell tales of fertile hidden islands and a legendary land of gold. Thirsty for adventure, the Catanians load their ships with supplies and seeds and set out on a voyage to the mysterious ocean in the fog.

1. Components

3-player game

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
Face-Up – CATAN---2224414
Face-Up – Seafarers16-------16
Face-Down – CATAN---211--4
Face-Down – Seafarers2-2-11118
Total18-24445542
Number Tokens?345689101112Total
Face-Up – CATAN-11222212114
Face-Up – Seafarers-----------
Face-Down – CATAN-11----1--3
Face-Down – Seafarers-1-1111-117
Total-32333323224

Other components (3-player game)

  • Harbors: 5x 2:1 harbor markers, 3x 3:1 harbor markers
  • Fog tokens: 12x (see the "Face-Down" hexes on this table)

2. Preparation

Set up the upper and lower islands, and their surrounding sea hexes so that all of the terrain hexes and number tokens match the appropriate diagram.

Select the 12 fog tokens for your setup. They are the "Face-Down" terrain hexes on the chart. (tip: they also have a 3 icon on the front). Randomize these fog tokens and place them face down in the middle of the sea. You discover them later in the game. Leave the terrain hexes that correspond to the fog tokens aside for now.

Randomize the remaining number tokens and set them aside, unseen (perhaps in a mug or a cloth bag).

3. Additional Rules

Setup Phase

Build your first 2 settlements with roads/ships on the upper and/or lower island, as described in CATAN.

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to the settlement.

Pirate & Robber

Play this scenario with both the robber and the pirate.

  • The pirate starts on the end-frame sea hex as shown.
  • The robber starts on the hex with the 12 number token.

Discovery of New Territories

When you connect a ship (or a road) to an unexplored area, you discover a new hex. If you place a ship or road that connects to the intersection of an unexplored hex, you must immediately flip over the fog token and then replace it with the corresponding 3D hex from the box.

If the discovered region is a land hex, you must also take a random number token from the pile you set aside and place it on the hex. Then you receive a reward: 1 resource card of the type produced by that hex.

If the discovered region is a sea hex, then there is no reward. You will have to explore farther across the ocean to find new territories.

Ending the Game

The game ends as soon as a player reaches 12 VPs on their turn.

4. Variable Setup

The contours of the upper and lower islands, and the locations of the harbors, should not be altered. Within these contours, the land hexes, number tokens, and harbors can be randomized freely.

4-player game components (for Scenario 3 variable setup)

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
Face-Up – CATAN---3334417
Face-Up – Seafarers13-------13
Face-Down – CATAN---1----1
Face-Down – Seafarers2-21221111
Total15-25555542
Number Tokens?345689101112Total
Face-Up – CATAN122222221117
Face-Up – Seafarers-----------
Face-Down – CATAN--------1-1
Face-Down – Seafarers-1111111119
Total133333333227

Other components (4-player game)

  • Harbors: 5x 2:1 harbor markers, 4x 3:1 harbor markers
  • Fog tokens: 12x (see the "Face-Down" hexes on this table)

Scenario 4: Through the Desert

Far away, to the west of Catan, a new island is discovered. The Catanians name it "Desert Island" because a desert belt splits the island into two parts. Soon after building the first settlements in the larger part of the island, scouts discover fertile land on the other side of the desert belt. At the same time, ships discover smaller islands with gold deposits and abundant ore deposits. Now, who will be the first to build new settlements, and where? The most daring settlers set out to cross the merciless desert. Others try to be the first to reach the smaller islands, build settlements there, and expand them into prospering cities.

1. Components

3-player game

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
Main Island – CATAN-1-2323415
Main Island – Seafarers82------10
Foreign Areas – CATAN---2-11-4
Foreign Areas – Seafarers2-2--1-16
Total10324344535
Number Tokens?345689101112Total
Main Island – CATAN112122221-14
Main Island – Seafarers-----------
Foreign Areas – CATAN-1-1-----13
Foreign Areas – Seafarers--11111---5
Total123333321122

Other components (3-player game)

  • CATAN Chits: 24x
  • Harbors: 5x 2:1 harbor markers, 3x 3:1 harbor markers

2. Preparation

Set up the game as shown in the appropriate diagram above.

3. Additional Rules

Setup Phase

A desert zone divides the bigger island into a small land strip (upper left) and a main island. You must build your first 2 settlements (with roads/ships) on the main island. The smaller islands and the small land strip are considered to be "foreign" areas.

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to the settlement.

Pirate & Robber

Play this scenario with both the robber and the pirate. The robber starts on one of the deserts and the pirate starts on the end-frame sea hex as shown.

Special Victory Points (VPs)

The first time you build a new settlement in each of the "foreign" areas (on 1 of the small islands and/or on the small strip of land), you receive 2 special VPs. Place 2 CATAN Chits beside the settlement when you build it. It does not matter if another player has already built a settlement in that foreign area. Potentially, each player can earn up to 8 special VPs in this scenario.

Ending the Game

The game ends as soon as a player reaches 14 VPs on their turn.

4. Variable Setup

The main island and the foreign areas can be set up in a manner similar to the variable setup in a CATAN 3D game.

Main Island Setup

First, place the 3 desert hexes in the positions shown in the appropriate setup diagram (3-player or 4-player). Next, randomly place the "main island" land hexes on the main island in the positions shown in the setup diagram. Then, place harbor markers in the locations indicated using harbor tokens to randomize the type.

Then, place the 8 sea hexes (or 10 for 4 players) adjacent to the main island as shown in the setup. Finally, place the main island number tokens randomly on the land hexes.

Foreign Islands Setup

There are 10 (or 12 for 4 players) "foreign area" terrain hexes (outlined in blue) on the setup diagrams. Randomly place the foreign area terrain hexes in these areas. Finally, place the "foreign islands" number tokens randomly on the land hexes.

Note: When doing a variable setup, you should not place red number tokens (6s and 8s) on adjacent hexes, nor should you place them on gold field hexes.

4-player game components (for Scenario 4 variable setup)

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
Main Island – CATAN-1-2324416
Main Island – Seafarers102--1--114
Foreign Areas – CATAN---2-1--3
Foreign Areas – Seafarers2-21121-9
Total12325555542
Number Tokens?345689101112Total
Main Island – CATAN-22222222117
Main Island – Seafarers-----------
Foreign Areas – CATAN1---------1
Foreign Areas – Seafarers-1111111119
Total133333333227

Other components (4-player game)

  • CATAN Chits: 32x
  • Harbors: 5x 2:1 harbor markers, 4x 3:1 harbor markers

Scenario 5: The Forgotten Tribe

Far in the South, Catanian settlers reach a long, narrow island. Soon the first settlements emerge. When exploring the surrounding waters, the Catanians come across small, inhabited islands. During their first encounter, the explorers find the inhabitants speak the same language and know the same legends. It soon becomes clear that these people are descendants of a group of Catanians whose ship was lost; a ship from a fleet that hundreds of years ago reached Catan for the first time. The reunion with their Catanian kin causes great joy, and they don't hold back on neighborly help and gifts.

1. Components

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
All Islands – CATAN-1-4334419
All Islands – Seafarers19221221130
Total19325555549
Number Tokens?345689101112Total
All Islands – CATAN122222222118
All Islands – Seafarers-----------
Total122222222118

Other components

  • CATAN Chits: 8x
  • Harbors: 5x 2:1 harbor markers & tokens, 1x 3:1 harbor markers & tokens

2. Preparation

Set up the game as shown in the diagram above. Then:

  • Place the 8 CATAN Chits on the coastal paths as shown.
  • Place the 6 harbor markers on the locations indicated. Randomize the type of harbor with the harbor tokens.
  • Take the 4 topmost cards from the (shuffled) stack of development cards and place them, with their reverse sides facing up, beside the paths indicated in the setup.

Important: The small islands all remain without number tokens on them.

3. Additional Rules

Setup Phase

Build your first 2 settlements with roads/ships on the big main island, as described in CATAN.

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to the settlement.

During play, no settlements can be built on the surrounding small islands that do not produce resources.

Pirate & Robber

Play this scenario with both the robber and the pirate. The robber starts on any desert hex, and the pirate starts on the sea hex as shown.

When a "7" is rolled, either the robber or the pirate can be moved. The robber cannot be moved to the small islands. Once the robber has left its starting desert hex, it cannot be moved back there.

Special Victory Points (VPs)

Each of the CATAN Chits placed on the outer islands is worth 1 VP. If you reach one of the islands with 1 of your ships and build (or move) a ship onto the path with a CATAN Chit, take the chit and place it in front of yourself.

Gifts

Gifts from the forgotten tribe consist of VPs (CATAN Chits), development cards, and harbors.

  • Development Cards. If you build (or move) a ship onto a path with a card, take the card. Regular development card use rules apply (only play 1 card per round; cards may not be played the turn you acquire them; VP cards to be revealed immediately only if it lets you win the game, etc.).
  • Harbors. If you build (or move) a ship to a path beside a harbor, remove the harbor from the board. You must immediately place this harbor if possible. You can only place a harbor on a coastal path, that is adjacent to 1 settlements/cities, a distance of at least 1 path from another harbor. If you have no such location, put the harbor marker into your supply until you build a settlement that meets the requirements. You can use your newly-placed harbor immediately.

Ending the Game

The game ends when a player reaches 13 VPs on their turn.

4. Variable Setup

The land hexes and number tokens of the main island can be rearranged freely. Make sure the 3 land hexes at the right side of the main island don't receive numbers that are too favorable (that is, no 5, 6, 8, or 9). The small islands must remain as shown in the diagram.

Note: When doing a variable setup, you should not place red number tokens (6s and 8s) on adjacent hexes.

Scenario 6: Cloth for Catan

On their voyage westward, the Catanians encounter distant islands inhabited by members of a forgotten tribe of clothmakers. Over the course of centuries, these island artisans acquired great skills in producing cloth. The magnificent cloth and resplendent garments of these people quickly attract the Catanians' attention. Since the clothing of the newcomers is not nearly as high in quality, a busy barter trade for the beautiful cloth soon begins.

1. Components

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
All Islands – CATAN-1-4334419
All Islands – Seafarers18121-1--23
Total18225344442
Number Tokens?345689101112Total
All Islands – CATAN122222222118
All Islands – Seafarers111111111110
Total233333333228

Other components

  • CATAN Chits: 50x (10 piles of 5 chits)
  • Harbors: 5x 2:1 harbor markers & tokens, 4x 3:1 harbor markers & tokens

2. Preparation

Set up the game map as shown in the diagram using a random method to place the harbors.

Place 2 number tokens on each of the 4 small islands as shown (right on the intersections). Each of these number tokens (circled in red on the map) represents an undiscovered village belonging to a forgotten tribe of weavers.

Place 5 CATAN Chits next to each of the 8 villages. Place the remaining 10 CATAN Chits beside the board to form a "general supply." In this scenario, each CATAN Chit represents a bolt of cloth.

No VPs are awarded for the "Longest Trade Route" in this scenario. You can leave that component aside.

3. Additional Rules

Setup Phase

Build your first 2 settlements with roads/ships on the 2 main islands, as described in CATAN.

Once the last player has placed their second settlement, everyone—starting with the first player and continuing in a clockwise direction—can build a third settlement and adjacent road/ship. When you place your third settlement, you receive your starting resources.

The weavers live on the 4 small islands in the center of the map (the number tokens are their villages). You may never build settlements on these 4 islands.

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to the settlement.

Cloth Trade

As soon as you establish a shipping route between 1 of your own settlements/cities and a weaver village (i.e., you reach an intersection with a number token), you establish "trade relations" with this village:

  • Immediately take 1 bolt of cloth (CATAN Chit) from the supply of this village. Each time the number of the village is rolled, you receive 1 more bolt of cloth.
  • If 2 or more players have connected to a village and the number of the village is rolled, each player receives 1 bolt of cloth (CATAN Chit) from the supply of this village.
  • If there are not enough CATAN Chits left in the supply for the village to give 1 to each connected player, take enough chits from the general supply for those players.
  • If there are no CATAN Chits next to a village when its number is rolled, no one receives any CATAN Chits from that village. Do not take CATAN Chits from the general supply.
  • 2 bolts of cloth (CATAN Chits) are worth 1 VP, but an unpaired bolt of cloth is worth nothing.

Moving Ships

Any shipping route that connects 1 of your settlements/cities to a weaver village is "closed." This means that you may not move any ships that are part of that shipping route.

Pirate & Robber

Play this scenario with both the robber and the pirate. The robber starts on the fields hex with the 12 number token. The robber cannot move to the weavers' islands.

The pirate starts on the end-frame sea hex as shown. You may only move the pirate if you have at least 1 shipping route between 1 of your settlements/cities and a weaver village. When you move the pirate, you can either draw 1 resource card or take a CATAN Chit (bolt of cloth) from one of the players whose ship is adjacent to the new pirate hex.

Ending the Game

The game ends when a player reaches 14 VPs on their turn OR when 3 or fewer of the weavers' villages contain 1 or fewer CATAN Chits. In the second case, the player with the most VPs wins. In case of a tie, the tied player who has more bolts of cloth wins.

4. Variable Setup

The land hexes and number tokens of the 2 main islands can be rearranged freely. The position, terrain, and number tokens of the 4 islands in the center should not be changed.

Scenario 7: The Pirate Islands

In the Northwest, pirates have invaded the island kingdom of the Catanians. The battle-hardened sea robbers quickly sink the peaceful Catanians' merchant ships and capture the settlements on the western isles. After expanding the captured settlements into fortresses, the pirates continue with their raids. Now they are threatening the eastern island. Time and again, they attack the coastal settlements with their fleet and rob valuable resources from the Catanians. The Catanians decide to build a navy to stop the audacious acts of the pirates and drive them back into the open sea.

1. Components

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
All Islands – CATAN-1-4334419
All Islands – Seafarers19221221130
Total19325555549
Number Tokens?345689101112Total
All Islands – CATAN122222222118
All Islands – Seafarers--111111--6
Total123333332124

Other components

  • CATAN Chits: 3-player game: 9x; 4-player game: 12x
  • Harbors: 5x 2:1 harbor markers & tokens, 3x 3:1 harbor markers & tokens

2. Preparation

The required game components are listed above. Set up the game map as shown in the diagram, and place the harbor markers randomly as described on page 3.

Please note: The hexes outlined in red do not produce resources (and have no number token on them).

Place 1 settlement and 1 ship of each color on the coast of the eastern island, as shown. You can build on the eastern island as usual; all other islands are "pirate islands."

Build 4 pirate fortresses on the western islands, as shown. Each pirate fortress consists of 1 settlement of each player color with 3 CATAN Chits placed beside it.

Please note: In a 3-player game, do not use the white player's position. Do not place them on the board during setup. (Take care if you switch/substitute colors!)

If you are playing a 3-player game, remove all of the VP cards from the development card deck. In a 4-player game, the VP cards remain in the deck but will be used only as "Knight" cards.

Longest Trade Route and Largest Army

The "Longest Trade Route" and "Largest Army" special VP cards are not used in this scenario. Leave them aside.

3. Additional Rules

Setup Phase

Build 2 settlements with roads/ships on the main (eastern) island (at the right side of the scenario diagram), as described in CATAN. After finishing the setup phase, each player has 3 settlements on the eastern island.

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to the settlement.

Pirate & Robber

The pirate fleet is represented by the pirate figure and starts on the sea hex as shown. The robber is not used in this scenario.

Ship Building

You can build only 1 shipping route. Your shipping route must begin at 1 of your coastal settlements/cities on the eastern island. This shipping route must first lead to the intersection marked by the circle of your color and then to the pirate fortress of your color. Your shipping route cannot branch/fork, nor can it be continued beyond the pirate fortress. Your shipping route must be built in such a way so that it reaches its destination in as short a route as possible—i.e., a route may not veer off to block other players' routes.

Warships

When you reveal a "Knight" card (or a VP card in a game with 4 players), you can convert your hindmost (i.e., closest to your route's starting settlement/city) "normal" ship into a warship. In order to mark a ship as a warship, turn it on its side. Place the card used into a discard pile.

Attention: When the stack of development cards is used up, no further development cards can be purchased. Discarded cards do not enter the game again.

The Pirate Fleet

The pirate fleet circumnavigates the 2 desert islands in a clockwise direction as shown in the scenario diagram. After you roll the dice, but before anything else, the pirate fleet moves a number of hexes equal to the lower value of the 2 dice (e.g. If the dice show "3" and "6," the pirate moves 3 hexes). If both dice show the same number, use the number on either die.

Pirate Attack

If the pirate fleet ends its move on a hex that is adjacent to 1 of your settlements/cities, you are immediately attacked—even before resource production or the resolution of a "7" roll.

  • The die result used for movement also determines the strength of the pirates.
  • Your strength is equal to the number of warships you have.
  • If the pirate is stronger, you lose 1 resource card plus another resource card for each of your cities. The lost cards are drawn randomly from your hand and are discarded.
  • If you are stronger, you receive 1 resource card of your choice from the supply.
  • If both parties are equally strong, nothing happens.

Building a Settlement on the Pirate Island

Once your shipping route reaches the marked intersection of your color on the pirate islands, you can pay the building costs to build a settlement there. You may only build 1 such settlement, but it can be expanded into a city.

Please note: Building this settlement can also be a disadvantage because it doubles the probability of a pirate attack on 1 of your coastal settlements/cities.

Scenario 8: The Wonders of Catan

After the Catanians defeat the pirates for good, a period of prosperity and peace begins on the islands of Catan. The tribes decide to embellish the northern archipelago. Discovered last, it is graced with magnificent buildings in praise of Catan. Soon, building turns into a competition. Who will be the first to complete a Wonder of Catan?

1. Components

The components table below is the one printed for this scenario.

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
All Islands – CATAN-1-4334419
All Islands – Seafarers19221221130
Total19325555549
Number Tokens?345689101112Total
All Islands – CATAN122222222118
All Islands – Seafarers111111111-9
Total233333333127

Other components

  • CATAN Chits: 16x
  • Harbors: 5x 2:1 harbor markers & tokens, 4x 3:1 harbor markers & tokens
  • Wonder cards: 5x

2. Preparation

The required game components are listed above. Set up the game map as shown in the scenario diagram and place the harbor markers randomly as described on page 3.

Set the wonder cards beside the supply.

3. Additional Rules

Setup Phase

Build your first 2 settlements with roads/ships on the main island, as described in CATAN. However, no settlements may be placed on the small islands, nor on the intersections marked with brown and purple squares, nor on the intersections with yellow exclamation points (see the diagram).

Remember: If you build a settlement on the coast, you may place a ship (instead of a road) next to it. You can then immediately go out to sea.

Each player receives 1 CATAN Chit.

Special Victory Points (VPs)

If you build a settlement on 1 of the smaller islands, you receive 1 special VP. Take a CATAN Chit and place it next to the settlement when you build it. It does not matter if other players have already built settlements on that island.

Building the Wonders of Catan

The first player to start building a wonder can choose from the 5 wonder cards. The other players must choose from the remaining wonders. You are only allowed to build 1 wonder.

  • You can only start building a Wonder of Catan if you already meet the requirements specified on its wonder card. For example, you can only start building the Monument if you have a city at a harbor AND have built a trade route with at least 5 consecutive, unbranched roads/ships.
  • If you meet the requirements for a wonder, you can start building the wonder on your turn by placing 1 of your ships on the corresponding wonder card (preferably below the resource costs). Once you start building your wonder, no other player may start building the same wonder.
  • Each wonder is subdivided into 4 levels. Each level costs the 5 resources indicated on the wonder card.
  • If you pay the resources for the first level of your wonder to the supply, place a CATAN Chit on level 1 of the wonder card. If you pay for level 2, move the chit to level 2, and so on.
  • If you have enough resources, you can build several levels of your wonder during the same turn.

Wonder requirements (as printed on the wonder cards)

  • Cathedral – Requirement: 1 city and at least 6 victory points
  • Great Bridge – Requirement: Settlement at the strait (purple square)
  • Great Wall – Requirement: Settlement at the wasteland (brown square)
  • Great Theater – Requirement: 2 cities
  • Monument – Requirement: City at a harbor and a trade route with 5 roads/ships

Pirate & Robber

The robber starts on any of the desert hexes. The pirate is not used in this scenario.

Ending the Game

This scenario has two possible winning conditions. You win if...

  • You complete your Wonder of Catan (paid for level 4) OR
  • If you have 10 VPs and have completed a higher level of your Wonder of Catan than any other player.

4. Variable Setup

Within the given frame, the land hexes and number tokens of the main island can be rearranged and combined freely. The 2 land hexes adjacent to the deserts shouldn't receive favorable numbers (neither 6s nor 8s).

Scenario 9: New World

Hungry for new adventures? No problem! Here is your chance to build your own scenarios. You can follow our brief instructions or create your own methodology. Bring your friends or family along for new and unique adventures in Catan!

1. Components

The components table below is the one printed for this scenario. The printed page also shows a numbered grid (1–42) of the fog-token positions.

Terrain HexesSeaDesertGold fieldsFieldsHillsMountainsPastureForestTotal
All Islands – CATAN---4334418
All Islands – Seafarers19--1111124
Total19--5445542
Number Tokens?345689101112Total
All Islands – CATAN122222222118
All Islands – Seafarers-111--11--5
Total133322332123

Other components

  • Harbors: 5x 2:1 harbor markers & tokens, 5x 3:1 harbor markers & tokens
  • CATAN Chits: 16x
  • Fog tokens: 42x

2. Preparation

Assemble the frame as shown in the diagram. Take all of the fog tokens that correspond to the terrain hexes listed in the components table. (tip: all of the fog tokens with a 9 icon on the front). Randomize these tokens in some way and reveal them one at a time. As you reveal each fog token, place the corresponding terrain hex into the frame in the order shown on the diagram (or some other agreed-upon pattern).

After placing all the terrain hexes, randomize all of the listed number tokens and place 1 token on each land hex.

Important: You are not allowed to place the red number tokens (6s and 8s) on adjacent hexes! If two red numbers end up next to each other, swap 1 with another number token from the board. All players must agree on which tokens to swap.

Shuffle the harbor tokens facedown and divide them as equally as possible between all of the players (don't look at them yet). Starting with the oldest player and proceeding clockwise, reveal 1 harbor token, take a corresponding harbor marker and place it on a coastal path of your choice. The harbor marker must sit on a sea hex/frame with the gangways touching the land. Continue revealing and placing harbors in turn order until all of the harbors are placed.

Important: You can never place a harbor on a path that is adjacent to another harbor.

3. Additional Rules

Setup Phase

You may place your starting settlements (with roads/ships) on any islands you choose. You may place both settlements on the same island, or you may place them on 2 separate islands. Thus, at the beginning of the game a player has 1 or 2 "home islands." All other islands are "foreign islands" to that player.

Remember: If you place a starting settlement on the coast, you may place a ship (instead of a road) next to it. You can then immediately go out to sea.

Pirate & Robber

Play this scenario with both the robber and the pirate. Start the robber and the pirate on the frame as shown. Each will enter play when it is first moved.

Special Victory Points

If you build a settlement on a foreign island, you receive 1 special VP. Take 1 CATAN Chit and place it next to the settlement when you build it. Each player may earn only 1 special VP for building on each foreign island in this scenario. It does not matter if other players have already built settlements on that island.

Ending the Game

The game ends once a player has reached 12 VPs.

4. Variable Setup

Changes can be made if the players are not happy with the setup of the hexes (e.g., too many small islands or a main island that is too big). All players should agree to any changes.

Players can also devise their own scenarios and try them out. Use these guidelines or set them aside. Happy creating!

Appendix: Cities & Knights 3D

The development of paper, cloth, and coin has helped Catan prosper. Cities now decorate its landscape, and brave knights are ready to protect them from the new threat across the sea. Collect and trade three new commodities, improve cities into mighty metropolises, and work together to defend Catan with city walls and knights.

Cities & Knights Components

Contents of Cities & Knights 3D

  • 1 Barbarian Track Frame (replaces 1 of the 2-cove CATAN 3D frames)
  • 1 Barbarian Ship
  • 1 Merchant
  • 4 Sets of Pieces in 4 Different Player Colors. Each set has: Basic knight x2, Strong knight x2, Mighty knight x2, City walls x3, Knight activation helmets x6
  • 54 Progress Cards in 3 Decks: Science deck x18, Politics deck x18, Trade deck x18
  • 6 Defender of Catan Cards
  • 4 City Improvement Flip Charts
  • 36 Commodity Cards: Cloth x12, Coin x12, Paper x12
  • 1 Event Die
  • 2 Card Trays
  • 4 Building Costs Cards
  • 3 Metropolis Pieces and 3 Metropolis Tokens
  • 1 Rulebook
  • 1 Appendix

Components Required from CATAN 3D

  • 19 Terrain Hexes: Desert x1, Fields x4, Pasture x4, Hills x3, Forest x4, Mountains x3
  • 9 Harbor Markers: Brick x1, Wool x1, Grain x1, Ore x1, Lumber x1, 3:1 x4
  • 4 Sets of Pieces in 4 Different Player Colors: 4 Cities, 5 Settlements, 15 Roads
  • 5 Sea Frames: one cove frame x3, two cove frame x2
  • 18 Number Tokens
  • 2 Dice
  • 95 Resource Cards
  • 2 Card Trays
  • 1 Special Victory Point Card (Largest Army)
  • 1 Robber Figure
  • 1 Rulebook
  • 1 Almanac

Cities & Knights Preparation

Assemble the Flip Charts

Before playing your first game, you must prepare the city improvement flip charts. Each interior page of a flip chart has 2 perforations. Separate these pages by gently pulling the sections of each page apart along the perforations. When finished, you will have 3 separate sections, each with 5 pages.

The Barbarian Track

Before you assemble the sea frame, replace any 1 of the 2-cove sea frames with the new Barbarian Track Frame.

Build the 3D Game Board

Normally, you play Cities & Knights using the Starting Setup for Experienced Players with a variable board (described in the CATAN 3D Almanac). For your first Cities & Knights game, we recommend that you use the starting setup shown below. It provides a balanced production of the resources and commodities (particularly grain) required for a good first game.

Build the Island: First, assemble the sea frame. Next, add the terrain hexes and number tokens as shown. Place the harbors in the coves, the robber on the desert, and the barbarian ship on the first track space as shown.

Starting setup for your first game (frame pieces: one cove frame x3, two cove frame x2; the Barbarian Track Frame piece replaces one of the two-cove frames). The layout diagram is not reproduced here.

Cities & Knights Setup

Arrange the Other Game Pieces

Place the 4 card trays beside the island. Sort the resource cards by type and place them faceup, 3 in one card tray and 2 in a second card tray. Then place the Defender of Catan cards in the remaining open space in the tray. Sort the new commodity cards into 3 stacks by type and place them faceup in a tray. Sort and shuffle each progress card deck and place the decks facedown in the final card tray. Place the "Longest Road" card, the 3 metropolis pieces, the metropolis markers, and the merchant near the supply.

Place the 2 CATAN dice, the event die near the board.

Setup Phase

Once you've built the board and arranged the pieces, begin the starting setup phase. Each player rolls the 2 CATAN dice; the player with the highest roll is the first player and begins. Players place their initial settlements, cities, and roads similarly to CATAN.

  • The first placement round starts with the first player and continues clockwise around the table. Each player places 1 settlement and 1 road (as in CATAN).
  • The second placement round starts with the last player to place a settlement. It continues counterclockwise around the table. Each player now places 1 city and 1 road.
  • Take your starting resources immediately after you place your city. You receive 1 resource for each terrain adjacent to your city.

Place your city improvement flip chart in front of you so the first page of each category shows that you have not built any city improvements (the city icon in the upper left of each category).

Each player selects a color and takes the following pieces:

  • 5 settlements, 4 cities, and 15 roads (all from the CATAN 3D)
  • 6 knights (2 basic, 2 strong, and 2 mighty)
  • 3 city walls
  • 6 knight activation helmets (common color)
  • 1 city improvement flip chart
  • 1 building costs card

Cities & Knights Progress Cards

The progress card appendix lists each card by deck. The number in parentheses after each card name is the number of copies in its deck.

Trade Cards

Merchant (6)

Place the merchant on any land hex next to 1 of your settlements or cities. You may exchange the resources produced by this type of hex with the supply at a 2:1 rate, as long as the merchant remains on that hex. You also receive 1 victory point for as long as you control the merchant.

When you play this card, take the merchant piece and put it on any land hex next to 1 or more of your settlements or cities. As long as the merchant remains here (under your control), you may trade the type of resource produced by this hex with the supply at a 2:1 rate (as is the case with a special harbor). As usual, you may also exchange these resources for commodities. If another player plays a "Merchant" card, that player takes control of the merchant and receives the trade advantage and the victory point. If you want to move the merchant to a different hex, you will have to play another "Merchant" card. The robber does not affect the merchant.

Commercial Harbor (2)

You may force each of the other players to make a special trade. You may offer each opponent any 1 resource card from your hand. They must exchange it for any 1 commodity card of their choice from their hand, if they have any. You may use this ability at any time during the turn you play the card. However, you may only force each player to make this trade with you once that turn. Opponents choose which commodity card to give you if they have more than 1 type. If you offer a resource to a player who has no commodity cards, take your resource card back; the trade is void.

Merchant Fleet (2)

You may use 1 resource or commodity of your choice to make any number of 2:1 trades with the supply during the turn that you play this card. For the rest of the turn, you may trade 1 resource or commodity of your choice at a 2:1 rate. You can make as many such trades as you wish. As usual, you may exchange commodities for resources, and vice versa.

Master Merchant (2)

Choose another player who has more victory points than you. Look at the player's hand of resource and commodity cards and choose 2 cards to take and add to your hand. You can only play this card on an opponent who has more victory points than you. There is no defense against this card.

Resource Monopoly (4)

Name a resource (brick, grain, ore, lumber, or wool). Each opponent must give you 2 cards of that type (if they have any). You may name any of the 5 resources (not commodities). Players who have that resource must give you 2; if they only have 1, they must give you 1.

Trade Monopoly (2)

Name a commodity (cloth, coin, or paper). Each opponent must give you 1 card of that type (if they have any). You may name any of the 3 commodities (not resources). Players that have that commodity must give you 1.

Politics Cards

Intrigue (2)

You may displace an opponent's knight, without using a knight of your own. The knight must be on an intersection connected to one of your roads or lines of ships.

With this card you can displace an opponent's knight without using a knight of your own. You can play this card even if you have no knights of your own. The displaced knight must be moved to an empty space. If the knight cannot be placed anywhere else, then remove it from the board (return it to its owner). After the knight is displaced, you may place a basic knight, following the normal rules.

Bishop (2)

Move the robber. You may draw 1 random card (resource or commodity) from the hand of each player who has a settlement or city adjacent to the robber's new hex.

When you use this card to move the robber, you can steal 1 random card from each player who has a settlement or city next to the hex that you move to, instead of stealing from only 1 player. If a player has more than 1 settlement or city there, you can still only steal 1 card from that player.

Deserter (2)

Choose 1 opponent. They must remove 1 knight of their choice from the board. You may then place 1 of your own knights on the board (its strength must equal that of the knight removed).

When you play this card, your opponent chooses which of their knights to remove from the board. If they choose a knight that you do not have available (for example, a strong knight and both of your strong knights are already on the board), you may place a basic knight instead. If you cannot place any knights, your opponent must still remove 1 of their own knight and you place nothing. If your opponent removes a mighty knight, you may place 1 of your mighty knights even if you have not yet built the "Fortress" city improvement (politics—blue). The knight you place has the same status (active or inactive) as the knight your opponent removed.

Diplomat (2)

You may remove any "open" road (a road with nothing attached at one end). If you remove one of your own roads, you may place it in another location.

An "open" road is a road at the beginning or end of a chain of roads that does not have a knight, city, or settlement of the same color attached at one end. If you remove an opponent's road, it returns to their supply. If you remove your own road, then you may place it immediately on the board, free of charge (following the normal building rules—connected to your own road or settlement/city). You may remove your own road and choose not to replace it.

Saboteur (2)

Each player who has as many or more victory points than you must discard half of their own cards to the supply (resource and/or commodity).

When you play this card, each player who has as many or more victory points than you must discard half (round down) of their cards to the supply (resource and/or commodity cards). Each player chooses which of their own cards to discard.

Constitution (1)

This card awards you 1 victory point. You must play this card faceup in front of you immediately when you draw it, even if it is not your turn. You may not keep VP cards in your hand. It does not count toward your hand limit of 4 progress cards, and it may not be stolen by the Spy.

Spy (3)

Look at another player's hand of progress cards. You may choose 1 card to take and add to your hand. You may even steal another Spy and play it immediately or save it for later. Victory point cards cannot be stolen.

Warlord (2)

You may activate all of your knights for free. When you play this card, you can activate your knights without paying any grain. Remember that a knight may not perform any actions during the same turn after it is activated, but you can activate it after it has performed an action that turn.

Wedding (2)

Each opponent who has more victory points than you must give you 2 resource/commodity cards of their choice. If any of these players only have 1 card in hand, that player must give you that card. If any of these players have no cards, then that player gives you nothing. Players whose VPs are equal to or lower than yours are not affected by this card.

Science Cards

Alchemist (2)

The Alchemist is the only progress card you can play before you roll the dice. It allows you to choose the results of both production dice. Then, roll the event die as normal and resolve the event.

When you play this card, take the red and yellow dice and turn them so the result you want is faceup. You can even make the dice roll "7." However, the event has to be resolved first. Then players receive their production as normal. You may not play this card after you roll the dice.

Crane (2)

You can build a city improvement (abbey, town hall, etc.) for 1 commodity less than normal. The Crane can only be used to reduce the cost of building 1 city improvement (turning over a page of your flip chart). If you build a city, you must pay the normal resource costs. You may use a Crane to reduce the cost of a first-level improvement (to nothing). You may not combine 2 Crane cards for the same improvement.

Engineer (1)

You may build 1 city wall for free. Take 1 city wall and put it under 1 of your cities. A city wall increases the number of cards you can safely hold in your hand by 2 cards when a "7" is rolled. Each city can only have 1 city wall, and you cannot have more than 3 city walls at a time.

Inventor (2)

Swap 2 number tokens of your choice, but not 2, 12, 6, or 8. You do not have to have a settlement or city next to the hexes with the numbers you are swapping. You can choose to exchange a token that is on the hex occupied by the robber; however, the robber does not move with the token.

Example: You choose to swap a 9 and an 11. Take the 9 token and put it on the hex where the 11 token is. Take the 11 token and put it on the hex where the 9 token was.

Medicine (2)

You may upgrade a settlement to a city for 2 ore and 1 grain. When you play this card, you save 1 ore and 1 grain. You may not combine 2 of these cards for the same city.

Mining (2)

Collect 2 ore cards for each mountains hex adjacent to at least 1 of your settlements or cities. You receive 2 ore cards for each mountains hex next to any of your settlements and cities. Unlike normal production, cities do not increase this bonus.

Example: You have 2 settlements next to a mountains hex, and a city next to a different mountains hex. If you play the Mining card, you will receive 4 ore cards.

Irrigation (2)

Collect 2 grain cards for each fields hex adjacent to at least 1 of your settlements or cities. You receive 2 grain cards for each fields hex next to any of your settlements and cities. Unlike normal production, cities do not increase this bonus.

Example: You have 2 cities next to a fields hex. You have a settlement next to a different field. If you play the Irrigation card, you will receive 4 grain cards.

Smith (2)

You may promote 2 of your knights 1 level each for free. You may not promote mighty knights. You may promote a knight regardless of whether it is active or inactive. The condition of the knight (active or inactive) does not change. You may only promote a strong knight (level 2) if you have built the "Fortress" city improvement (politics—blue). You may only promote a knight 1 level per turn.

Printer (1)

This card awards you 1 victory point. You must play this card faceup in front of you immediately when you draw it, even if it is not your turn. You may not keep VP cards in your hand. It does not count toward your hand limit of 4 progress cards, and it may not be stolen by the Spy.

Road Building (2)

This card allows you to build 2 roads for free. The roads you build do not have to be adjacent to each other. These roads cost you nothing to build. You must follow all the normal building rules. If you are also playing with the Seafarers expansion, you may substitute either or both roads with ships.

A "7" Is Rolled

There is no robber in this scenario. Still, if you have more than 7 resources in your hand and a "7" is rolled, you lose half of them, as usual. Then the player who rolled the "7" can steal a card from any of the other players.

Conquest of a Pirate Fortress

If your shipping route has reached the pirate fortress that matches your color, you may choose to attack the pirates at the end of your turn.

To determine the strength of the pirate fortress, roll a die—the result is the pirates' strength for the current turn.

  • If the number of warships in your shipping route is greater than the number rolled, you have won and you can remove 1 of the CATAN Chits next to the pirate fortress.
  • If the number of your warships is less than the number rolled, you lose the battle and must remove your 2 ships closest to the pirate fortress.
  • If the number of your warships is equal to the number rolled, you lose your ship adjacent to the pirate fortress.

After an attack, your turn is finished; hence it is not possible to attack a pirate fortress more than once per turn.

In the case of a tie or a defeat, you must rebuild the lost ships on a later turn in order to once again attack the pirate fortress.

Once your pirate fortress has lost all 3 CATAN Chits, you have driven the pirates away and have recaptured the settlement. From that point on, the pirate fortress is 1 of your settlements—it gives you 1 VP, it produces for you, and it can be upgraded to a city.

Ending the Game

You win if...

  • You capture the pirate fortress of your color – AND
  • You have a total of at least 10 VPs.

If all pirate fortresses are captured before the game ends, remove the pirate fleet.

4. Variable Setup

This scenario is balanced only if the given setup is maintained. Therefore, it should not be varied, except for the type of harbor at each location. You can randomize them by using the harbor tokens.