Bluolino
Bluolino Rulebook
Table of Contents
Table of Contents
- Components
- Setup
- Game Flow
- Decision Phase
- Action Phase
- How to Read the Action Wheel
- A-1: Basic Action — Conduct Skill Training
- How to Read the Skill Board
- A-2: Basic Action — Convert Resources
- A-3: Basic Action — Receive Assistance
- How to Read a Help Card
- A-4: Basic Action — Transport Resources
- A-5: Basic Action — Gain Resources
- A-6: Basic Action — Produce Iron
- B: Construction Action
- Cleanup Phase
- Game End / Scoring
- Changes for 2 Players
- Reference
Components
- City Board x1
- Action Wheel x1
- Score Pad x1
- Realm Boards x6
- Bridge Tiles x6
- Bridge Tokens x6
- Resource Boards x4
- Skill Boards x4
- Skill Chips x24 (6 in each of 4 colors)
- Resource Tokens x112 (32 each of Wood, Stone, and Ore; 16 of Iron)
- Coin Chips x37 (Value 1 x25, Value 3 x12)
- Evaluation Point Chips x16
- Level 1 Building Cards x18
- Level 2 Building Cards x36
- Help Cards x30
- Planning Cards x18
- Architect Tokens x4 (1 in each of 4 colors)
- Building Tokens x28 (7 in each of 4 colors)
- First Player Marker x1
Setup
The following instructions describe how to set up and play the game with 3–4 players. For a 2-player game, please refer to the rule modifications on page 34.
Game Setup
- Unfold the City Board and place it face up in the center of the table.
- Place the Action Wheel face up in the center of the City Board. Align the line printed on the Action Wheel with the line printed between A and F on the City Board. The initial position of the Action Wheel should be chosen at random.
- Surround the City Board with the 6 Realm Boards, connecting each one to its matching letter. Place each Realm Board face up so that the letter printed at the bottom of the Realm Board matches the corresponding letter on the City Board. The City Board and each of the six attached Realm Boards are collectively referred to as Plots.
- Prepare the 6 Bridge Tiles. If this is your first time playing: Place all six Bridge Tiles face up and check the Roman numeral printed in the upper right corner of each tile. Then place each Bridge Tile face up between the designated pairs of Realm Boards as indicated below. If you are familiar with the game: Shuffle the six Bridge Tiles face down so that their front sides cannot be seen, then place one tile face up between each pair of Realm Boards.
| Number | I | II | III | IV | V | VI |
|---|---|---|---|---|---|---|
| Place | A&B | B&C | C&D | D&E | E&F | F&A |
- Separate all Resource Tokens (Wood / Stone / Ore / Iron) by type and place them near the Realm Boards.
- Separate all Coin Chips (Value 1 / Value 3) by type and place them near the Realm Boards.
- Place all Evaluation Point Chips near the Realm Boards.
- Place all Bridge Tokens near the Realm Boards. The area where the Resource Tokens, Coin Chips, Evaluation Point Chips, and Bridge Tokens are placed is referred to as the Supply.
- Shuffle all Help Cards face down and place them near the Realm Boards to form the Help Deck.
- Shuffle all Building Cards of each level face down. Then place them near the Realm Boards as the Level 1 Building Deck and Level 2 Building Deck, keeping both decks face down.
- Reveal the top 4 cards from each Building Deck (8 cards total) and place them face up next to their respective deck. This area where Building Cards are displayed is referred to as the Display.
Player Setup
- Each player chooses a color and takes the following components in that color. Return any unused Architect Tokens, Building Tokens, and Skill Chips to the box. – 1 Architect Token – 7 Building Tokens – 6 Skill Chips
- Each player takes 1 Skill Board and 1 Resource Board, placing them in front of themselves. Return any unused boards to the box.
- Each player places their Skill Chips on the "Level 1" space of the Skill Track on their Skill Board.
- Shuffle all Planning Cards face down and deal 1 to each player. Players keep their card hidden as their hand. Return any remaining Plan Cards to the box.
- The player who most recently performed a construction project becomes the Start Player and takes the Start Player Marker. If no player qualifies, determine the Start Player by any random method.
- Turns proceed clockwise from the Start Player. In turn order, players receive the following Resource Tokens and Coin Chips from the Supply:
| Turn Order | 1st | 2nd | 3rd | 4th |
|---|---|---|---|---|
| Resource Tokens | Wood x1, Stone x1, Ore x1 | Wood x2, Stone x1, Ore x1 | Wood x2, Stone x1, Ore x1 | Wood x2, Stone x2, Ore x1 |
| Coins | 3 | 3 | 3 | 3 |
- Players keep the Coin Chips received in step 17 in their personal supply. Place the Resource Tokens received in step 17 on the central space labeled with the gear symbol of your Resource Board. The spaces labeled A–F and the gear symbol on the Resource Board are collectively referred to as the Resource Storage Areas.
Game Flow
The game is played over a series of rounds, each consisting of the following three phases. At the end of the Cleanup Phase, if any player has used all 7 of their Building Tokens from their personal supply, the game ends at the conclusion of that round and final scoring is performed.
- Decision Phase
- Action Phase
- Cleanup Phase
Decision Phase
The Start Player takes the Action Wheel from the City Board and may freely rotate both the first layer (purple) and the second layer (red). After adjusting the layers, the Start Player returns the Action Wheel to the City Board, aligning the line printed on the Action Wheel with the line printed between A and F on the City Board.
In the example above: The first layer (purple) is rotated 180 degrees counterclockwise. The second layer (red) is rotated 60 degrees counterclockwise. Return the Action Wheel so that its alignment line matches the line between A and F on the black City Board.
Note: When returning the Action Wheel to the City Board, make sure that the alignment lines on the first layer (purple) and second layer (red) are perfectly matched.
Action Phase
Starting with the Start Player and proceeding clockwise, each player takes their turn. On a player's turn, they must perform steps 1–3 in order. After completing these steps, the turn passes to the player on their left. Once all players have taken one turn, proceed to the Cleanup Phase.
1. Place Architect Token. Place one of your Architect Tokens from your personal supply onto any Action Space on the City Board.
You may not place your Architect Token on an Action Space that already contains another player's Architect Token.
How to Read the City Board – Action Spaces. There are six Action Spaces on the City Board. The letters A–F indicate which Resource Storage Area is referenced when gaining Resources. See page 10 for details.
2. Generate Resources. Gain 1 Resource shown on the first layer (purple) of the Action Wheel at the Action Space where you placed your Architect Token. Take the corresponding Resource Token from the Supply. Place the gained Resource Token onto the Resource Storage Area whose letter is printed on the outer edge of that Action Space. There is no limit to the number of Resources that may be placed in any Resource Storage Area. Once placed, Resources cannot be moved to another area unless instructed by a cost payment or a game effect.
Example: Place the Wood gained in step 1 onto the "A" Resource Storage Area. Place the Ore gained in step 1 onto the "C" Resource Storage Area.
3. Perform an Action. You may perform one of the actions A–C below. After completing the action, your turn ends and play passes to the player on your left.
- A: Basic Action. You may perform only the action shown on the second layer (red) of the Action Wheel at the Action Space where your Architect Token is placed.
- B: Construction Action (see page 19). You may perform this action as long as you meet all required conditions.
- C: Alternative Action (see page 26). Perform this action when you cannot or do not wish to perform either Action A or Action B.
How to Read the Action Wheel
- Second Layer (Red): Shows the six basic actions. See page 11 for details.
- First Layer (Purple): Indicates the Resource you gain during the Action Phase.
A-1: Basic Action — Conduct Skill Training
Pay Coins to increase the level of one Skill of your choice on your Skill Board by one step. To do so, you must pay a number of Coins to the Supply equal to the current level of the Skill you wish to improve.
You may increase only one Skill per execution of this action. When you increase a Skill, move its Skill Chip one space to the right. If the destination space shows an action icon, you must immediately resolve that action.
Refer to the Reference Sheet for the effects of each action.
Example: Since the Skill Chip is currently on Level 2, pay 2 Coins to the Supply. Move the Skill Chip one space to the right, increasing it to Level 3.
Even if a Skill Chip is already at Level 4, you may still increase that Skill. In this case, the Skill Chip remains on Level 4, and you receive 2 Evaluation Point Chips from the Supply.
Example: Since the Skill Chip is currently on Level 4, pay 4 Coins to the Supply. The Skill Chip remains on Level 4, and you receive 2 Evaluation Point Chips.
How to Read the Skill Board
The Skill Board has six Skill Tracks, each with Levels 1–4: Wood Skill Track, Stone Skill Track, Ore Skill Track, Ironworking Skill Track, Conversion Skill Track, and Assistance Skill Track.
- Evaluation Points gained at the end of the game for raising a Skill to Level 3.
- Evaluation Points gained at the end of the game for raising a Skill to Level 4.
- Evaluation Points received when increasing a Skill beyond Level 4.
- Actions performed when a Skill reaches Level 2.
- Actions performed when a Skill reaches Level 4.
A-2: Basic Action — Convert Resources
Return 1 Resource or 1 Coin to the Supply, then convert it into 1 different Resource, 1 Coin, or 1 Evaluation Point Chip. You may perform this conversion up to a number of times equal to your current level on the Conversion Skill Track (you are not required to use all available conversions). You may convert Iron into other Resources, Coins, or Evaluation Point Chips, but you may not convert other Resources or Coins into Iron.
If you convert 1 Resource into a different Resource, place the newly converted Resource in the same Resource Storage Area where the original Resource was located.
If you convert 1 Coin into 1 Resource, place the newly gained Resource in the Resource Storage Area corresponding to the letter printed on the outer edge of the Action Space where your Architect Token is placed.
If you convert 1 Resource into 1 Coin, place the Coin in your personal supply.
Resources, Coins, and Evaluation Point Chips are considered unlimited. If you run out of physical components, use a suitable substitute.
A-3: Basic Action — Receive Assistance
Draw 1 Help Card from the Help Deck and add it to your hand. If your level on the Assistance Skill Track is higher than 1, draw a number of Help Cards equal to your current level instead.
Choose 1 of the drawn cards to keep and add it to your hand, then discard the remaining cards. If the Help Deck is empty, shuffle all discarded Help Cards to form a new Help Deck. There is no limit to the number of Help Cards you may hold.
Example: Since your level on the Assistance Skill Track is Level 1, draw 1 Help Card from the Help Deck and add it to your hand.
Example: Since your level on the Assistance Skill Track is Level 3, draw 3 Help Cards from the Help Deck and choose 1 to keep. Add the chosen card to your hand and discard the other two.
How to Read a Help Card
A Help Card shows a Cost (in the upper-left corner), a Name, and an Effect. See the Reference Sheet.
Free Action: Using Help Cards. Each player may use any number of Help Cards before or after performing step 3: Perform an Action on their turn. When using a Help Card, you must pay the Coin cost shown in the upper-left corner of the card to the Supply.
After resolving its effect, discard the Help Card. Refer to the Reference Sheet for details on Help Card effects.
A-4: Basic Action — Transport Resources
Choose one Resource Storage Area from among A–F or the gear-symbol area. (You may not choose more than one area.) You may then move any or all Resources from that chosen area to any other Resource Storage Areas. It is not required to move every Resource; you may leave some or all Resources in place.
A-5: Basic Action — Gain Resources
Gain the Resource shown on the first layer (purple) of the Action Wheel at the Action Space where your Architect Token is placed. You may gain up to a number of that Resource equal to your current level on the corresponding Skill Track. Take the gained Resources from the Supply.
Place all gained Resources in the Resource Storage Area corresponding to the letter printed on the outer edge of the Action Space where your Architect Token is located.
This action allows you to gain Resources in addition to those gained during step 2: Generate Resources on your turn.
Example: The Resource shown on the first layer of the Action Wheel at the Action Space where you placed your Architect Token is Wood (1). Your level on the Woodworking Skill Track is 2 (2). The letter printed on the outer edge of that Action Space is "A" (3). Therefore, you gain 2 Wood and place them in the "A" Resource Storage Area (4).
A-6: Basic Action — Produce Iron
Choose any Resource Storage Area (A–F or the gear-symbol area) that contains Ore and return any amount of Ore from that area to the Supply. You may then convert up to a number of Ore equal to your level on the Ironworking Skill Track into Iron.
You may convert Ore from any Resource Storage Area, regardless of its letter. Place each newly produced Iron in the same Resource Storage Area where the Ore being converted was originally located.
Example: Since your level on the Ironworking Skill Track is Level 2, you may convert up to 2 Ore into Iron.
Regarding Ore and Iron. Iron is considered a higher-tier Resource and may be used in place of Ore. However, Ore may not be used in place of Iron.
B: Construction Action
Perform one of the following three Construction Actions:
- Construct a Building on a Realm Board
- Construct a Building on the City Board
- Construct a Bridge
B-1: Construction Action — Construct a Building on a Realm Board
Resolve the following steps in order.
- Choose 1 Building Card from the Display. You may freely choose from either Level 1 or Level 2. Alternatively, if you have previously gained a Building Card as a reward, you may instead choose 1 Building Card from your hand. See page 21 for details on how to read Building Cards.
- Check the Construction Cost and Construction Location shown on the Building Card you selected.
- Pay the required Resources equal to the Construction Cost from the corresponding Resource Storage Area indicated by the Construction Location. Return the paid Resources to the Supply.
Note: You may pay the Construction Cost regardless of the Action Space where your Architect Token is currently placed.
- Gain the reward shown on the Building Card. If the reward is Resources, place them in the Resource Storage Area corresponding to the letter printed on the outer edge of the Action Space where your Architect Token is located.
- Take 1 Building Token from your personal supply and place it on the Construction Space of the Realm Board specified by the Construction Location checked in step 2. There are three Construction Spaces, and you may place your Building Token on any of them. The bonus you receive depends on which space you choose. You may also place your Building Token on a Construction Space that already contains another player's Building Token.
- Apply the bonus of the Construction Space where you placed your Building Token. Refer to the Reference Sheet for details on bonuses. If the bonus grants Resources, place them in the Resource Storage Area matching the letter printed on the outer edge of the Action Space where your Architect Token is located.
After completing these steps, place the Building Card face up in front of you; it is now considered a Constructed Building Card. Then refill the Display by drawing the top card from the corresponding deck. If the deck is empty, do not refill the Display and leave the space empty.
How to Read a Building Card
A Building Card shows a Name, a Type (there are Types 1–9), a Construction Location (ranges from A–F), a Construction Cost (see the Reference Sheet), a Reward (see the Reference Sheet), and the Evaluation Points gained at the end of the game.
How to Read a Realm Board
Each Realm Board contains three types of Construction Spaces. Each Realm Board shows a Name, a Bonus (see the Reference Sheet), and an Alphabet letter used during game setup.
B-2: Construction Action — Construct a Building on the City Board
Resolve the following steps in order. To perform this action, you must have already performed at least four Construction Actions in total (i.e., you must have four or more of your Building Tokens placed on Realm Boards or Bridge Tiles).
- Choose one Construction Space on the City Board. You may choose any Construction Space regardless of the Action Space where your Architect Token is placed. You may not choose a Construction Space that already contains a Building Token.
- Check the Construction Cost printed above the selected Construction Space. All Construction Costs for placing a Building Token on the City Board must be paid in Iron.
- Pay the Construction Cost by returning the required amount of Iron from the gear-symbol Resource Storage Area to the Supply.
- Take 1 Building Token from your personal supply and place it on the Construction Space you selected in step 1. Each Construction Space on the City Board may hold only one Building Token.
- Apply the bonus of the Construction Space where you placed your Building Token. Refer to the Reference Sheet for bonus effects.
B-3: Construction Action — Construct a Bridge
Resolve the following steps in order. To perform this action, you must have at least one of your Building Tokens placed on each of the two Realm Boards adjacent to the Bridge Tile you intend to construct.
- Choose one face-up Bridge Tile that does not yet have a Building Token placed on it. You may choose any such Bridge Tile regardless of the Action Space where your Architect Token is located. You may not choose a face-down Bridge Tile (a Bridge Tile that already has a Building Token on it).
- Check the Construction Cost printed on the Bridge Tile you selected. See page 25 for details on how to read Bridge Tiles.
- Pay the Construction Cost from the two Resource Storage Areas whose letters match the two Realm Boards adjacent to the Bridge Tile. You may use any combination of Resources from these two areas when paying the cost. Return the paid Resources to the Supply.
- Flip the selected Bridge Tile face down. Then take 1 Building Token from your personal supply and place it on the Construction Space shown on the back of the Bridge Tile. Each Bridge Tile may hold only one Building Token.
- Apply the bonus of the Construction Space where you placed your Building Token. Refer to the Reference Sheet for bonus effects.
- Gain 1 Bridge Token from the Supply. Place the Bridge Token so that it spans the two Resource Storage Areas whose letters match the two Realm Boards adjacent to the Bridge Tile selected in step 1. Resource Storage Areas connected by a Bridge Token are considered linked, and you may use Resources from both areas when paying Construction Costs.
Example: If a Bridge Token is placed between A and B, you may use Resources from B when paying a cost required from A.
How to Read a Bridge Tile
A Bridge Tile shows a Serial Number (used during game setup), a Requirement for Placing a Building Token, a Construction Cost, a Reward for Constructing the Bridge, a Bonus (see the Reference Sheet), and the Evaluation Points gained at the end of the game.
How to Read a Planning Card
A Planning Card shows a Name, a Condition (see the Reference Sheet), a Reward (see the Reference Sheet), and a Serial Number (used during game setup).
Free Action: Using Planning Cards. Each player may use Planning Cards during their turn, either before or after performing step 3: Perform an Action.
To use a Planning Card, you must meet the conditions shown on the right side of the card. After resolving its effect, discard the Planning Card.
Refer to the Reference Sheet for details on Planning Card effects.
C: Alternative Action
If you cannot or do not wish to perform A: Basic Action or B: Construction Action, you may instead perform C: Alternative Action.
With this action, you may move 1 Resource of your choice from any Resource Storage Area to any other Resource Storage Area.
Cleanup Phase
Perform the following steps 1–3 in order.
- Check the End-Game Condition. If any player has placed all 7 of their Building Tokens, leaving none in their personal supply (i.e., all their Building Tokens are on the City Board, Realm Boards, or Bridge Tiles), the game ends at this time and final scoring is conducted. If no player meets the end-game condition, proceed with the remaining steps. After completing all Cleanup procedures, begin the next round starting with the Decision Phase.
- Retrieve Architect Tokens. Each player retrieves their Architect Token from the City Board and returns it to their personal supply.
- Pass the Start Player Marker. Pass the Start Player Marker to the player on the left.
Game End / Scoring
If, during the Cleanup Phase, any player has placed all 7 of their Building Tokens (i.e., none remain in their personal supply and all are placed on the City Board, Realm Boards, or Bridge Tiles), the game ends immediately and final scoring is conducted.
During final scoring, each player totals the Evaluation Points gained from the 10 scoring categories listed below. The player with the highest total is declared the winner and recognized as the most accomplished architect. If there is a tie, the tied player who has placed more Building Tokens on the Realm Boards, City Board, and Bridge Tiles wins the game. If still tied, the tied player with more Evaluation Point Chips wins. If a tie remains, the tied players share the victory.
Scoring categories:
Transcription gap: the per-space and per-level Evaluation Point values and bonus rewards printed on the City Board, Realm Boards, Bridge Tiles, Skill Board and Building Cards are shown only as pictograms in the source, and the physical Reference Sheet they point to is not part of this PDF. Those numbers are not transcribed here. The skill and track icons in the examples below are written as their names.
- EPs from Plots. Each player counts the number of Plots (the City Board and the Realm Boards) in which they have placed at least one Building Token. Each player then gains Evaluation Points according to the number of Plots they occupy.
| Number | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|---|
| EP | 0 | 1 | 2 | 3 | 4 | 7 | 11 | 15 |
Example: In the illustration, the orange player has placed Building Tokens in three Plots: Realm Boards A and B, plus the City Board. Therefore, the player gains 3 Evaluation Points.
- EPs from the Number of Building Tokens. Each player counts how many of their Building Tokens are placed on the Realm Boards and the City Board (up to 7 locations total). Each player then gains Evaluation Points according to the number of Building Tokens they have placed. If a player has placed a Building Token on a Bridge Tile, that player is considered to have one additional Building Token placed on each of the two Realm Boards connected by that bridge. Repeat this process for each Realm Board and for the City Board.
| Number | 0 | 1 | 2 | 3 | 4 | 5 | 6 or more |
|---|---|---|---|---|---|---|---|
| EP | 0 | 1 | 2 | 4 | 8 | 13 | 18 |
Example: In the illustration, the orange player has a total of 4 Building Tokens in Realm Board A (including the one counted via the Bridge Tile). Therefore, the player gains 8 Evaluation Points.
- EPs from Constructed Building Cards. Each player gains the EPs shown on all Constructed Building Cards they have in front of them.
Example: In the illustration above: 2 + 2 + 2 + 7 = 13 Evaluation Points.
- EPs from the Variety of Building Cards. Each player gains EPs according to the number of different types of Constructed Building Cards they have in front of them.
| Number | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|---|
| EP | 0 | 1 | 2 | 3 | 5 | 7 | 10 | 13 |
Example: In the illustration above, the player has three different types of Constructed Building Cards: types 3, 7, and 8 (type 3 appears more than once, but duplicates do not count). Therefore, the player gains 3 Evaluation Points.
- EPs from Bridge Tiles. Each player gains EPs for any Building Tokens they have placed on Bridge Tiles.
Example: In the illustration, the orange player gains 10 Evaluation Points from the Bridge Tile located between A and B.
- EPs from the City Board. Each player gains Evaluation Points for any Building Tokens they have placed on the Construction Spaces of the City Board.
Example: In the illustration, the orange player gains 15 Evaluation Points from the Construction Spaces on the City Board.
- EPs from the Skill Board. Each player gains Evaluation Points according to the final positions of their six Skill Chips on the Skill Board.
Example: In the illustration, the orange player gains Evaluation Points from the – (Wood) Skill Track, – (Stone) Skill Track, and – (Ore) Skill Track for a total of 9 Evaluation Points.
-
EPs from Help Cards. Each player gains 4 Evaluation Points for every "Honor Certificate" Help Card in their hand. If a player has multiple copies of "Honor Certificate," they gain 4 Evaluation Points for each of them.
-
EPs from Remaining Resources. Each player gains 1 Evaluation Point for every 5 Resources remaining in their Resource Storage Areas (rounding down).
Example: In the illustration, the player has 7 remaining Resources. 7 ÷ 5 = 1.4 → rounded down to 1 Evaluation Point.
- EPs from EP Chips. Each player gains 1 EP for every Evaluation Point Chip in their personal supply.
Changes for 2 Players
If you are playing this game with 2 players, apply the following rule changes.
Game Setup
After completing the standard setup, each player chooses a color from the Architect Tokens that were returned to the box and takes one additional Architect Token. Thus, each player begins the game with two Architect Tokens. No other setup changes are required.
Game Flow
Decision Phase. There are no additional changes.
Action Phase. Each time it is your turn, place one of your Architect Tokens from your personal supply onto an Action Space and take your turn as usual. Then play proceeds to your opponent's turn. After both players have taken one turn, play returns to your opponent, and each player takes one additional turn. In other words, the players alternate turns, taking two turns each per round. You may place either of your Architect Tokens on your turn; there is no required order.
Cleanup Phase. When retrieving Architect Tokens, each player collects both Architect Tokens of the two colors they selected during setup and returns them to their personal supply.
The Start Player Marker alternates between players each round.
There are no other changes.
Game End / Scoring
There are no additional changes.
Reference
Planning Cards
| Name | Condition | Reward |
|---|---|---|
| Bridge Crossing Plan | Has gained at least one Bridge Token. | Gain any 2 Resources from among Wood, Stone, and Ore, and place them in any Resource Storage Areas of your choice. |
| Focused Construction Plan | Has placed at least 2 Building Tokens in a single plot. | Gain 2 Wood, and place them in any Resource Storage Areas of your choice. |
| Wide-Area Construction Plan | Has placed at least 1 Building Token in three or more plots. | Gain 2 Stone, and place them in any Resource Storage Areas of your choice. |
| Variation Construction Plan | Has three or more types of Building Cards in front of them. | Gain 2 Ore, and place them in any Resource Storage Areas of your choice. |
| Two-Stage Construction Plan | Has at least one Level 1 and one Level 2 Building Card in front of them. | Increase the level of one Skill Track of your choice among Wood, Stone, or Ore by 1 step, without paying any Coins. |
| Variation Development Plan | Has at least one Skill Track that is at Level 3 or higher. | Gain 1 Iron, and place it in any Resource Storage Area of your choice. |
Help Cards
| Name | Cost | Effect |
|---|---|---|
| Reskilling | 2 | Increase the level of one Skill Track of your choice by 1 step, without paying any Coins. |
| Resource Supply | 5 | Gain 3 Resources of your choice from among Wood, Stone, and Ore, and place them in any Resource Storage Areas of your choice. |
| Urgent Logistics | 3 | Move up to 4 Resources of your choice from any Resource Storage Area to any other Resource Storage Areas. |
| Refinery Permit | 1 | Convert up to 2 Ore in any Resource Storage Area into Iron. Place each converted Iron in the same Resource Storage Area where the Ore was originally located. |
| Honor Certificate | 0 | Gain 4 Evaluation Points at the end of the game. This Help Card cannot be used during the game. |
Note: If you gain Resources shown with an orange background (the orange tile icon), such as from Planning Cards or Help Cards, you may place those Resources in any Resource Storage Areas, regardless of the Action Space where your Architect Token is located. For all other ways of gaining Resources, place them in the Resource Storage Area that corresponds to the letter printed on the outer edge of the Action Space where your Architect Token is placed.
Note: If a Coin icon shows a red number, you must pay that number of Coins to the Supply. If a Coin icon shows a light brown number, you receive that number of Coins from the Supply.
Icon List
The icon pictograms of this list are images in the source and are not reproduced. Each row gives the printed label, meaning and effect text in the order the source lays them out.
| Icon | Meaning | Effect Details |
|---|---|---|
| (icon) | Gain any of Wood, Stone, or Ore. | Gain the Resource shown on the inner part of the Action Space where your Architect Token is placed, up to your level on the corresponding Skill Track. |
| Wood | Gain or pay the indicated number of Wood to or from the Supply. | Conduct Wood Skill Training. Increase your Woodworking Skill by 1 step without paying Coins. |
| Stone | Gain or pay the indicated number of Stone to or from the Supply. | Conduct Stone Skill Training. Increase your Stonecraft Skill by 1 step without paying Coins. |
| Ore | Gain or pay the indicated number of Ore to or from the Supply. | Conduct Ore Skill Training. Increase your Ore Processing Skill by 1 step without paying Coins. |
| Iron | Gain or pay the indicated number of Iron to or from the Supply. | Conduct Conversion Skill Training. Increase your Conversion Skill by 1 step without paying Coins. |
| Any one of Wood, Stone, or Ore | Gain the indicated number of Wood, Stone, or Ore (duplicates allowed) from the Supply. | Conduct Assistance Skill Training. Increase your Assistance Skill by 1 step without paying Coins. |
Icon Key (Frequently Asked Questions / Notes page)
| Icon | Meaning | Effect Details |
|---|---|---|
| Help Card | - | Gain 1 Help Card from the Help Deck and add it to your hand (regardless of your Assistance level). |
| Any Skill | - | - |
| Bridge Token | - | - |
| Coin | - | Gain or pay the indicated number of Coins to or from the Supply. |
| Evaluation Points | - | At the end of the game, gain the indicated amount of Evaluation Points. |
| Evaluation Point Chip | - | - |
| Realm Board | - | - |
| City Board | - | - |
Frequently Asked Questions / Notes
Frequently asked questions and additional notes are compiled on the official website, accessible via the QR code on the right. If you have any questions, please contact the publisher or review the information available through the QR code. The publisher also recommends checking for any errata updates before playing the game.
Source note: the printed text directs to the official website for FAQ and errata; that website is not transcribed here.
For rulebooks in languages other than Japanese, please refer to the website.