Battleground Fantasy Warfare: Men of Hawkshold Reinforcements thumbnail

Battleground Fantasy Warfare: Men of Hawkshold Reinforcements

Battleground Fantasy Warfare: Men of Hawkshold Reinforcements Rulebook

Table of Contents

Table of Contents

Advanced Rules

Core and Elite Units

Core units have the word "core" next to their point cost on the back of the card. An army must contain 1 core unit for every full 500 points available in army building.

Elite units have the word "elite" next to their point cost on the back of the card. An army may contain a maximum of 1 of each type of elite unit for every full 1,000 points available in army building.

For example: A 1,500 Men of Hawkshold army must contain 3 core units and may contain up to 1 Longbowmen and 1 Knights.

Core and Elite Units from the 2005 Battleground Armies

The core and elite unit rules are new to the Advanced Rule Book 2.0. The following are the core and elite units for the armies printed in 2005.

Men of Hawkshold

  • Core Units: Bowmen, Militia, Peasant Mob, Spearmen, Swordsmen
  • Elite Units: Knights, Longbowmen

Undead Army

  • Core Units: Ghoul Pack, Skeleton Bowmen, Skeleton Mob, Skeleton Spearmen, Zombies
  • Elite Units: Death Knights, Giant Catapult

Orc Army

  • Core Units: Goblin Bowmen, Goblin Raiders, Goblin Spearmen, Orc Spearmen, Orc Swordsmen
  • Elite Units: Goblin Bomb-Chucker, Trolls

Standing Orders

Advance to Short Range S

Advance to Short Range is a standing order which may only be given to units with range.

If the unit is in short range (less than half range) of and has the appropriate facing to shoot the nearest enemy unit, it remains in place and makes a shooting attack during combat. Otherwise, it moves its maximum movement toward the nearest enemy unit and shoots if possible.

Stay With the Line (standing order modifier)

A unit may be given the order to stay with the line with a friendly unit if their flank center points are within ½ S of each other.

Along with the standing order and any objective, draw an arrow facing to the left or right in your unit's command circle.

The stay with the line unit will move after (or at the same time as) the unit on the side the arrow is facing.

The stay with the line unit will move so that its flank center point is lined up with (touching) the other unit's flank center point. If it has insufficient movement, it will move as close to lining up as it can.

The stay with the line unit will not do a final rush unless the unit it is keeping pace with is doing a final rush.

Remove the arrow if:

  • After the stay with the line unit moves, no part of it is within S of any part of the unit it is keeping pace with.
  • The stay with the line unit has an objective and has reached that objective (e.g., it was on H1 and has reached location 1).
  • The stay with the line unit or the unit it is keeping pace with becomes engaged.
  • The unit it was keeping pace with does a final rush.
  • The unit it was keeping pace with routs or is destroyed.

Note: A unit will stay with the line even if that will move it away from its nearest enemy or objective.

Note: Units moving in a line may only be considered fast-moving if all units in the line are fast-moving.

Final Rushing With a Flank

When a unit final rushes with a flank, move either of its flank center points to the center point on the nearest open side of the nearest enemy unit. No maneuvering is necessary, just pick up the unit and place it in its new position.

A unit is eligible to final rush with a flank if:

  • It is near enough to final rush, but obstacles prevent the unit from doing any final rush, and
  • Obstacles would not prevent it from final rushing with its flank.

If a unit is eligible to final rush with its flank you may choose whether or not it does so. This does not cost a command action.

A unit final rushing with a flank is considered charging for that turn, but still suffers the normal penalties for being flanked.

Lining Up while Engaged

If at the end of your Movement and Command Phase one of your units is engaged with a single enemy unit and their center points are not lined up, then (if possible) move your unit so that their center points line up.

Note: This does not change which side (front, flank, rear) of the units are engaged.

Terrain

Terrain can have a dramatic effect on a battle. A fence or muddy ground might slow advancing troops. Walls or a wood line can provide life-saving cover. Understanding the tactical implications of terrain is a critical skill for any general.

Representing Terrain

You can represent terrain in a variety of ways. Anything you can put on your play surface that you and your opponent will recognize as terrain will suffice.

Buying Terrain

A variety of 3-D terrain is available at miniature gaming shops and hobby shops (miniature railroad terrain, for example). Your Move Games is planning to release 2-D playmats and terrain late in 2006.

Making Your Own Terrain

If you're really cheap (like Dave Humpherys), you can make your own terrain. Construction paper works well for this. An 8" green circle makes a good patch of forest or a hill, blue paper cut into 2.5" wide strips could represent a stream or river, etc.

Terrain and Movement

While a unit moves through most types of terrain, its movement category (MC) is modified. If a unit moves through multiple types of terrain or in and out of terrain in a single move, then it gets the lowest MC (largest penalty) for its entire move.

MC modifiers from terrain are cumulative with other MC modifiers (such as maneuvers).

If a unit is about to move into terrain that would lower its MC to an amount less than or equal to what it has already moved that turn, its move ends at the edge of that terrain feature.

Terrain Types

Roads

  • +1 MC, +2 MC for wheeled

Forest

  • -1 MC, -3 MC for wheeled and large
  • Soft cover
  • More then 2.5" of forest blocks line of sight.
  • Indirect fire is not possible into, out of, or within a forest if it would pass through 2.5" or more of the forest.
  • Indirect fire over a forest is unaffected.

Low Brush

  • -1 MC, -3 MC for wheeled

Shallow Water (streams, rivers, ponds, etc.)

  • -2 MC
  • -1 MC for large

Deep Water (rivers, ponds, lakes, etc.)

  • -2 MC for large
  • -3 MC for non-large who can swim (no platemail, no pole-arms, no bows)
  • Impassable for others
  • Soft cover for non-large
  • Units in deep water may not shoot.

River Rapids

  • -3 MC for large
  • Impassable for others
  • Soft cover
  • Units in river rapids may not shoot.

Very Deep Water

  • -3 MC for units that can swim (no platemail, no pole-arms, no bows)
  • Impassable for others
  • Soft cover
  • Units in very deep water may not shoot.

Swamp or Bog (shallow water)

  • -2 MC
  • -1 MC for large
  • Impassable for wheeled
  • Soft cover

Wet Ground (muddy, very shallow marsh, etc.)

  • -1 MC
  • -2 MC for wheeled

Sand

  • -1 MC
  • -2 MC for wheeled

Hedges, Fences

  • -1 MC
  • Impassable for wheeled
  • No effect on large
  • Soft cover
  • Gives defended obstacle bonus against non-large attackers

Low Walls

  • -1 MC for non-large units.
  • Impassable for wheeled
  • No effect on large
  • Hard cover
  • Gives defended obstacle bonus against non-large attackers

Hills

  • Each 10' of altitude counts as a different elevation level. Rings, like those found on a terrain map, denote changes in elevation level.
  • Blocks line of sight to far side
  • Units on hill have LOS to anything on lower elevation levels not blocked by intervening LOS blocking terrain of equal or higher elevation.
  • -1 MC when moving uphill

Cliffs or Rocky High Walls

  • Stop normal movement when cliff/wall is reached.
  • Every full turn spent at the base, a unit may climb (see below for climbing speeds).
  • When it reaches the top, move the unit to the other side of the cliff.
  • Once it is 10' below an enemy it would be abutted against, it must stop and fight.
  • Non-large unencumbered foot units (no platemail, no pole-arms, no bows) climb 10' per turn. (Use a die to keep track of height climbed.)
  • Encumbered foot units with ladders and encumbered large units climb 10' per turn.
  • Large unencumbered foot units climb 20' per turn.
  • Non-large unencumbered foot units with ladders climb 20' per turn.
  • Large unencumbered foot units with ladders climb 30' per turn.
  • Impassable to all others
  • High walls with ramparts give defenders the prepared fortification bonus.

Smooth High Walls

  • Impassable without ladders
  • With ladders, same as cliffs
  • Smooth high walls with ramparts give defenders the prepared fortification bonus.

Note: You and your opponent may agree to give some units ladders as part of a scenario. Ladders and other siege equipment will be covered in the Battleground: Fantasy Warfare Siege expansion.

Terrain-Based Combat Modifiers

High Ground (+0) +1/+0

A unit has the high ground if more than half of the unit is on a higher elevation than more than half of the enemy unit.

Soft Cover +1/+0 vs. shooting

A unit has soft cover if more than half of the unit is within a terrain feature that grants soft cover.

Hard Cover +2/+0 vs. shooting

A unit has hard cover if:

  • More than half of the unit is within a terrain feature that grants hard cover, or
  • More than half of the unit is abutted against a terrain feature that grants hard cover (such as a stone wall) and that terrain feature is between it and the shooter.

Defended Obstacle +0/+1 (engaged only)

A unit receives a defended obstacle bonus if its standing orders are Hold and more then half of the engaged side of the unit is abutted against the obstacle. For units on either side of a defended obstacle to be engaged, at least one of the units must have the Close standing order. (A unit with the Close standing order is attempting to climb the obstacle and engage the enemy.)

Prepared Fortification +1/+1 (engaged only)

A unit receives a prepared fortification bonus if it is inside the fortification, the enemy is outside the fortification, and the more then half of the engaged side of the unit is abutted against the fortification. For units on either side of a prepared fortification to be engaged, the unit outside the fortification must have the Close standing order.

Scaling Cliffs or Walls (-2) -1/-1 and -1/-1

A unit receives a scaling cliffs or walls penalty while climbing a cliff or wall and engaged with a unit on the top of the cliff or wall. A unit climbing a cliff or a wall becomes engaged with a unit at the top of the cliff or wall when it is within 10' of the top.

Advanced Scenarios

In a standard scenario, armies of equivalent strength line up on both sides of an open field and try to destroy each other. Advanced scenarios are every other conceivable type of battle. This section will provide you with some examples and ideas, but any scenario you can think of and get your opponent to agree to is fair game.

Alternate Victory Conditions

When using alternate victory conditions, there are more and/or different ways to win than the standard scenario's "destroying all of your opponent's forces."

Victory Points

Many alternate victory conditions use victory points. The player who scores the most points wins the game. Feel free to adjust the points awarded as you and your opponent see fit. Unless otherwise specified, points are awarded at the end of the game. For example, you don't get 250 points for having units in the enemy deployment zone unless the units are there when the game ends.

FeatPoints Awarded
Destroying an enemy unitPoints equal to the unit's cost
Routing an enemy unit off the tablePoints equal to ¾ of the unit's cost
Enemy unit in the redPoints equal to ½ of the unit's cost
Enemy unit in the yellowPoints equal to ¼ of the unit's cost
Each of your units that is undamaged10 Points
Having one or more units in the enemy deployment zone250 Points
Having at least one unit and no enemy units in any quarter of the battlefield.100 Points per quarter

Limited Duration Games

Limited duration games end at a specific time or turn. These scenarios are great for a faster game.

Turn Limit Game

Agree on a number of turns you will be playing. The game is over when each player has taken that number of turns. The winner is the player who gets the most victory points.

Time Limit Game

Agree on a time the game will end. When that time is reached finish the turn. The winner is the player who gets the most victory points. Players may choose to use an equal turn option. In this case, when time is reached the game ends when the player who went second finishes a turn.

Achieving Goals

Players win the game or get extra victory points when a specific goal is achieved. Here are two examples:

The Hunted

Each player writes "Hunted" on the back of one of their units. Whenever an enemy unit is destroyed or moves off the table, look at the back that unit. If it is the Hunted, you win the game (or, in a point based game, you get 500 points and the game ends at the end of the turn).

King of the Hill

At the beginning of the game, you and your opponent agree on a location and a number of turns. If either player has a unit occupying that location for the designated number of turns, he wins the game.

Uneven Forces

In this type of scenario, one player has fewer points to build his army with than the other player. This can be used to handicap a more advanced player. You can also rebalance the scenario, giving the player with less points advantages in other areas, like favorable terrain or easier victory conditions.

For example:

Delaying Action

The "defender" gets a smaller number of points than the "attacker." The game ends when the attacker has one or more units in the defender's deployment zone and the defender has no units in his own deployment zone. The defender gets 100 victory points at the end of each of the attacker's turns. The attacker gets no points for his undamaged units or for controlling quarters of the battlefield.

Non-Standard Deployment Zones

The location and size of the deployment zones is different for some scenarios. For example:

Wagon Train

The "defender's" deployment zone is a 1' 6" wide by 1' deep rectangle in the middle of the table. The "attacker's" deployment zone is the area within 6" of every table edge.

Large Games

In large games, players will have many command actions, enabling them to draw large numbers of command cards. Use one complete command card deck for every 3,000 points (or fraction thereof) available for army building. Shuffle the decks together into one large deck.

Multiplayer

More then one player can be on one side of a battle. In this case, the players on a side split up points during army building and divide command actions appropriately.

Example: Player A plays 3,000 points against player B, playing 1,100 points, and player C, playing 1,900 points. On player A's turn he has 6 command actions, and on the shared B and C turn, player B has 2 command actions while player C has 4 command actions.

Note: Each player may play a different army.

Note: Players may only use command actions and play command cards on their own units.

Optional Rules

Freeform Army Design (Optional Rule)

When playing with this optional rule, core unit minimums and elite unit maximums are ignored.

Flee (Optional Rule)

An unengaged unit that is about to be engaged may choose to flee. If it does, remove its standing order, turn it away from the enemy unit and move it away its full move. This is done before the engaging unit moves, and only if it will be sufficient to prevent the units from becoming engaged.

After the fleeing unit is moved, reexamine the nearest enemy for the engaging unit. If close enough, it may final rush that new unit.

"Getting them to fall back is easy. Getting them to stop... now that's the hard part."

Note: A fleeing unit is considered to be routing.

Height and Range Fire (Optional Rule)

Shooters get L (3.5") added to their range if they are firing at a target on lower ground (elevation level).

Shooters get L (3.5") subtracted from their range if they are firing at a target on higher ground (elevation level). This will not reduce a units range to less then S (2.5").

Hidden Deployment (Optional Rule)

This is used instead of the normal deployment rule. Set up a screen so that players can't see each other's deployment zones.

Players place all their units within the deployment zone and issue standing orders to all their units. Units may be given a location as an objective secretly by drawing the battlefield and writing the objective's number in the appropriate location on the drawing.

The player who spent the least number of points army building (including command cards) chooses who will take the first turn. The screens are then removed and any objectives are revealed.

Note: Units may not be given an enemy unit as an objective during deployment.

FAQ

Q: If my unit loses its last green square and all of its yellow squares in the same attack, or it loses more than one red square in a turn, do I have to take more than one rout check?

A: No. No matter how much damage a unit takes in one phase (e.g. combat), it will only cause one rout check in the subsequent phase. If, however, a unit takes additional damage from free attacks made when it routs, that damage can cause it to take an additional rout check.

Q: Will there be more factions?

A: Yes. A new faction will be released every three or four months, so you will always have new and exciting enemies to face. To find out what army will be released next, visit www.yourmovegames.com/BFW.

Q: What happens if I give a unit with the Hold order an enemy unit as an objective?

A: Only range units may be given a Hold order and an enemy unit as an objective. Your unit does not move and always considers the objective unit the nearest enemy.

Q: How many green command cards can I play in a turn?

A: There is no limit to the number of command cards (of any color) that you can play in a turn. Each player may, however, only play one command card per attack.

Q: If I play a command card when one of my units attacks, does that mean I can't play a command card when my next unit attacks?

A: No. An "attack" is defined as one unit rolling to hit and to damage another unit. During each attack, each player may play one command card.

Q: What happens if a range unit shoots at a routing unit?

A: The attack and any rout checks resulting from it are resolved as normal. Remember, if a routing unit fails a rout check, it is destroyed.

Q: Does a shooting unit get any combat bonus for shooting at the flank or rear of an enemy unit?

A: No. Combat bonuses for flanking, pinching, etc., only apply to engaged units.

Q: If one of my units is engaged with two enemy units, can I attack both of them?

A: No. Each unit can only attack one enemy unit each turn. During step one of the Combat Phase (Choosing Defenders), each player must announce which enemy units his units will attack.

Q: If my unit has a unit as an objective, but is engaged with more than one unit, can I attack either one?

A: Yes. Assigning an enemy unit as an objective only means that your unit always considers it the nearest enemy. It may still attack any unit it is engaged with, even if it is also engaged with its objective.

Q: One of my units is engaged with two enemy units and I announce that it will attack the first one. Later in the turn, the second enemy unit routs. Does my unit get to make a free attack?

A: Yes. All units engaged with a routing unit get free attacks.

Q: Do units that always have the Close standing order (like Crazed Goblins) count when totaling the number of units on each side during the "issuing standing orders" step (Step 4) of deployment?

A: Yes. If, for example, you have seven units, including two Crazed Goblins, and your opponent has six units, you will have to issue the first standing order, to a unit other than Crazed Goblins.

Q: Can a unit receive a charging bonus during a free attack?

A: Yes. A unit is considered charging if it has the Close standing order, was unengaged at the start of the turn and is attacking to its front.

Q: Can I play a command card during a free attack even if I already played a card when my unit attacked the first time?

A: Yes. You may play one command card during each attack, regardless of the circumstances.

Q: If I rally a unit, can I then spend another command action to change its standing order from Hold to Close?

A: No. When you rally a unit, you cannot give it new orders (other than the Hold order it receives when rallied) and it cannot shoot or move that turn.

Q: What do I do if I roll the wrong number of dice?

A: The roll doesn't count. Roll again with the correct number of dice.

Q: In what order should I move my units?

A: All final rushing units are moved first, then other units are moved in any order you wish. Often, you can get a unit to move more effectively without changing its standing order by moving neighboring units first, changing its shortest path to the nearest enemy.

Q: What happens if I pinch a unit already being pinched?

A: If it isn't already doing so, it will have to take a rout check in the Pre-Combat Rout Phase. Remember: a unit can get more then one pinching bonus.

Q: Is there a demo program for Battleground: Fantasy Warfare?

A: Yes. You can earn cool stuff by joining our demo program. For more information, email [email protected].

Q: What do we do if we realize that we didn't follow the rules on a previous turn?

A: These situations are always a judgment call. As a rule of thumb, if you can easily back up, you can correct the problem, but if a lot has happened since the error, just leave things the way they are.

Q: What if a player rolls combat dice without giving the other player a chance to play a command card?

A: If both players agree a chance to play a command card was not given, then the player may play the command card. If he does, the combat dice are re-rolled.

Q: My opponent and I disagree on how to handle a situation or interpret a rule. What should we do?

A: In a league or tournament situation, call the judge and he will make a ruling after both players explain what happened. If you can't agree during a casual game, randomly determine how to handle the situation this game (by rolling a die, for example). Before you play again, try to agree on how you will handle the situation if it comes up again.

Q: What do I do with destroyed units?

A: Destroyed units are removed from play. Take them off the table, but remember to keep track of destroyed units if you are playing a scenario that counts destroyed enemy units towards the score.

For an up-to-date FAQ, or to submit your own question, go to www.yourmovegames.com/BFW/faq.

Glossary

Active Player: The player whose turn it is.

Army Ability: A special ability specific to each army that can be used by spending command actions.

Attack: The process of a unit rolling to hit and rolling to damage against an enemy unit.

Battlefield: The area where the game is being played. A standard scenario is played on a 2'6" wide by 3' long surface.

Center Point: The midpoint of any side of a unit card, identified by a small red line.

Charging: Describes a unit that has the Close standing order, was not engaged at the start of the turn, and is attacking to its front.

Clearly Visible: Describes an enemy unit when you can draw a line from the front center point of your unit to any part of that enemy unit (that is in your unit's front arc) without passing through any other units or line of sight blocking terrain.

Close: A standing order. A unit with this order will move its maximum movement toward the nearest enemy unit.

Combat Rolls: Dice rolled to hit or rolled to damage.

Command Action: Resources replenished each turn which represent a general's influence on various aspects of the battlefield. Command actions may be spent to change standing orders, take direct control of units, use army abilities, rally units, or draw command cards.

Command Circle: A blank circle next to the stat bar on a unit card, where standing orders are written.

Courage Check: The roll a unit must take in a scary situation. Roll three dice, and if the result is equal to or less than the unit's courage, the unit passes the check. (See Fear Check and Rout Check.)

Damage Squares: Colored squares on a unit card's damage bar that are marked off to indicate that the unit has taken damage.

Deployment: The placement of unit cards at the start of the game.

Destroyed: Describes a unit with all of its damage squares marked off, or one that has disbanded as a result of being engaged while routing or failing a second rout check. Destroyed units are removed from play at the end of the turn.

Direct Control: Spending a command action to maneuver a unit any way you desire and move it any distance up to its current MC.

Engaged: Describes opposing units which each have half or more of a card edge in contact with each other.

Facing Side: The card edge of an enemy unit that is facing your unit. To determine which edge is the facing side, extend imaginary lines diagonally through the corners of the enemy unit. The side of the imaginary line that your unit's front center point is on is the facing side.

Fast-Moving Target: A unit that moved on its last turn with a MC of LL (7") or more.

Fear Check: A type of courage check. A unit failing this type of check becomes frightened. Frightened units get (-1)-1/-1 for the rest of the turn.

Fearsome: A unit attribute. When a unit engages or is engaged by a unit with the fearsome attribute, it must take a fear check. Fearsome units never take fear checks.

Final Rush: A maneuver that is made when a unit is near enough that its front center point is within its MC of an open side center point of the nearest enemy unit (taking into account all non-maneuvering MC modifiers) and its standing order is Close.

Flanking: Describes a unit which is engaging an enemy unit with its front abutted against the enemy unit's right or left side.

Free Attack: An attack made outside of the Combat Phase against a unit that just failed a rout check.

Frightened: Describes a unit that has failed a fear check this turn. Frightened units get (-1)-1/-1 for the rest of the turn.

Front Arc: Everything in front of the line created by extending the front of a unit card in both directions.

Hard Cover: A combat modifier applied when more than half of a unit is within a terrain feature that grants this status, or more than half of the unit is abutted against a terrain feature that grants hard cover (such as a stone wall), and that terrain feature is between it and the shooter.

High Ground: A combat modifier applied when more than half of a unit is on a higher elevation than more than half of the enemy unit.

Hold: A standing order. A unit with this order will not move.

In the Red: A unit is in the red if all of its green and yellow damage squares are marked off and at least one red damage square is not marked off. Units in the red get (-2) -0/-0 and -2.

In the Yellow: A unit is in the yellow if all of its green damage squares are marked off and at least one yellow damage square is not marked off. Units in the yellow get (-1) -0/-0 and -1.

Indirect Fire: Range fire that travels along an arc over things that would block the line of sight to an enemy unit.

Line of Sight (LOS): An attribute that some range units have. A unit with LOS range must be able to draw a straight line between its front center point and any center point of the enemy unit, without crossing other units or line of sight blocking terrain features.

Long Range: A combat modifier applied when the distance between a shooter's front center point and the closest center point of the target unit is over half of the shooter's range.

Movement Category: The distance a unit moves in a turn.

Nearest Enemy: Normally, the closest enemy unit within a unit's front arc. If a unit has been assigned an enemy unit as an objective, that enemy unit is always considered its nearest enemy, regardless of actual distance.

Objective: A modifier on a standing order that tells a unit to go to a specific location on the battlefield or to attack a specific enemy unit.

Open Side: A side of a unit on which there is enough space to be engaged.

Pinching: A combat modifier applied when a unit is engaged with exactly one enemy unit that is also being engaged on another side.

Rally: Spending a command action to turn a routing unit in any direction and give it the Hold standing order.

Range Attack: A standing order. If a unit with this order is in range of and has the appropriate facing to shoot the nearest enemy unit, it remains in place and makes a shooting attack during combat. Otherwise, it moves its maximum movement toward the nearest enemy unit and shoots if possible.

Rear Attacking: A combat modifier applied when a unit is engaging an enemy unit with its front abutted against the enemy unit's rear.

Rout Check: A type of courage check. When failing this type of check, a unit loses its standing orders and moves away from the enemy unit until it is rallied.

Routing: When a unit breaks and flees from combat (due to failing a rout check). Routing units have no standing orders and are destroyed if they become engaged or fail an additional rout check.

Soft Cover: The status that a unit achieves if more than half of the unit is within a terrain feature that grants soft cover.

Standing Orders: Three commands (Close, Hold and Range Attack) that are written directly on a unit card and used to determine unit movement.

Terrain: Natural or manmade features on the battlefield that may modify movement or combat.