Aspens: Wild Weather thumbnail

Aspens: Wild Weather

Aspens: Wild Weather Rulebook

Table of Contents

Table of Contents

Components

  • 6 Weather Power Boards
  • 6 Weather Dice
  • 14 Weather Marker Tiles
  • 1 drawstring bag

Scoring & Objective

Your objective is the same as in the base game. And the game is played and scored in the same way.

  • The player who controls the most forest spaces in the end wins.
  • All base game rules apply, unchanged, unless specifically overridden or modified by one of the abilities, covered in the rules of this expansion.

Setup

Set up the game board and water tiles the same way you would in a standard game, following the steps in the base game rulebook. Then, BEFORE seeding your initial forests as part of the base game setup, complete the expansion setup shown below.

1. Set up the game board. Set up the game board and water tiles the same way you would in a standard game, following the steps in the base game rulebook.

2. Set up the weather effects.

  • a. Lay out all 6 of the Weather Effect Boards, as well as the tracks for Mudslide and Torrential Rain.
  • b. Roll all 6 of the Weather Effect Dice, and set each one on its place on the corresponding Weather Effect Board. These values will remain for the entire game. Be sure not to change them.
  • c. For Mudslide and Sunbeam, place ALL the related marker tiles next to their boards.
  • d. For the Torrential Rain and Cold Snap effects, take the number of corresponding marker tiles equal to the value rolled on their corresponding die, and place them next to their boards.

3. Choose your Weather Effects.

  • a. Taking turns, starting with the first player, each player chooses 1 weather effect, taking all of its related components, until both players each have 2 in their play area.
    • See page 8 for an overview of each effect.
  • b. Place the 2 remaining, unchosen weather effects, with all of their components, back in the box. They will not be used this game.

Beginner's note: In your first game, we suggest you play with only Tornado, Cold Snap, Gusting Winds, and Torrential Rain, as they are the easiest to get started with.

4. Seed and grow your initial forests. Once you have each drafted your 2 Weather Effects, and returned the remaining ones to the box, resume "getting started" (shown in the base game rulebook) by seeding and growing your initial forests.

Once that is done, the setup is complete, and you are ready to start the game.

The board should look exactly the same as a normal game setup. In addition, both players should have their 2 chosen Weather Effects in front of them with the related components as well as a player aid.

Overview of Weather Powers

  • Tornado: Remove trees belonging to either player from the board, "re-planting" yours immediately, and returning your opponent's to them.
  • Cold Snap: Freeze spaces, making them unplayable for several turns.
  • Torrential Rain: Gain extra trees for several turns by flooding spaces adjacent to your OPPONENT's trees.
  • Gusting Winds: Plant your trees farther away on one of your turns, based on the strength of the Wind Gust.
  • SunBeam: BOTH players get increasing chances of extra trees for each space they control adjacent to the Sunbeam.
  • Mudslide: Sacrifice your own trees to carve paths through empty or occupied spaces, ignoring the Wind, to reach new territory and even destroy your opponent's trees.

Playing Powers

Each Weather Effect has a power. All the powers are single use, per game.

  • Many of them have multiple elements that you may use, effects that last multiple turns, or resources that can be used throughout the game. But after an effect has been completely used once, it is discarded for the rest of the game.

You can activate your power(s) at any time during any of your turns, AFTER the "Roll For Wind and Sun" step, as long as you follow the rules of the power.

  • This includes using both your powers on the same turn.

Activating a power does not count as your turn, and you still carry out all the steps of your turn as you normally would.

Tornado

Overview

Remove trees belonging to either player from the board, "re-planting" yours immediately on your turn, and returning your opponent's to them.

  • This allows you to clear blockages, reallocate your trees to change your strategy, or gather added trees to pull off your own big move.

How It Works

The value of the Tornado Die determines the "Strength" of the Tornado, which is how many trees you will be able to remove from the board. This is determined in the setup phase.

Number of trees you can remove: the Tornado Die value.

When You Activate the Power

  1. Remove up to this many trees from the board, belonging to either player, returning them to their owner's hand.
    • Any trees of your own that you removed, you get to immediately plant as you normally would on this SAME turn.
    • Any of your opponent's trees that you removed are returned to them and held by your opponent until their next turn, when they can plant them as normal.
    • You CANNOT remove trees from spaces adjacent to a water tile.
  2. Discard this ability at the end of your turn, after using it.

Example

6 was rolled on the Tornado Die during setup. And after the "Gain Trees" step of their turn, the Aspen player has 5 trees to use.

The Aspen player activates their Tornado and removes a total of 6 trees: 2 of their own that they take into their hand, and 4 of their opponent's that they return to them, creating a gap in the Pine player's line.

On the same turn, the Aspen player plants their trees, cutting through the gap they made in Pine's line, using the extra trees to extend further.

The Pine player will get to place their 4 trees that were removed, along with any other trees they have, on their next turn.

Cold Snap

Overview

Freeze spaces, making them unplayable for several turns.

  • This allows you to create pivotal blockages or slow down your opponent to gain a strategic advantage.

How It Works

The value of the Cold Snap Die determines the "Strength" of Cold Snap. This is how many Frost Tiles you get, determined in the setup phase.

On any of your turns throughout the game:

  • You may place any number of your unused Frost Tiles on an empty space.
    • This space CANNOT be adjacent to a starting water tile.
    • Make sure to place them with the Frozen side up.
  • Spaces with Frost on them are unplayable until the Frost fully melts, and the tile is removed.

While you have Frost Tiles on the board:

At the START of each of YOUR turns, all your previously played Frost Tiles melt one step further, until fully melted and removed.

  • Tiles in the "Frozen" state: flip them to the "Melting" side.
  • Tiles in the "Melting" state: remove them from the board.

Frost Tile rules:

  • Each Frost Tile can only be used once.
    • Once fully melted and removed from the board, discard the Frost Tile.
    • Once you have used and discarded ALL your Frost Tiles, discard this power.

Example

A 5 was rolled on the Cold Snap Die during setup, so the Aspen player has a total of 5 Frost Tiles to use throughout the game.

  • a. On their turn, they decide to use 1 of their Frost Tiles to freeze a space, making it unplayable, in an attempt to block the Pine player.
  • b. Then they use another one on the same turn to freeze another space, creating another block.
  • c. Finally, they decide to keep their 3 remaining Frost Tiles to use on a future turn.

Torrential Rain

Overview

Gain extra trees for several turns when you flood spaces adjacent to your OPPONENT's trees.

  • Place your floods strategically to maximize the amount of trees you gain.

How It Works

The value of the Torrential Rain Die determines the Rain "Strength". This is how many Flood Tiles you get to place, determined in the setup phase.

When You First Activate the Power

  1. Place the Rain Die on the starting space of the tracker. The rain's "lifetime" (number of turns it lasts) always starts at 2.
    • The die always starts on the rightmost space of the tracker, marked "Start".
  2. Place each of your Flood Tiles on any empty space on the board.
    • This space CANNOT be adjacent to a starting water tile.
    • You must place ALL of your Flood Tiles.
    • Spaces with Flood Tiles are considered valid, playable spaces, meaning players CAN plant trees on them.

Example

The Rain Die is a 3, so the Aspen player has 3 Flood Tiles to use.

On their turn, they place all of their Flood Tiles on spaces adjacent to their opponent's territory, hoping the Pine player will expand on or around them to increase the number of trees they get.

While the Flood Is Active

At the start of each of YOUR turns:

  1. Gain 1 tree for each space controlled by your OPPONENT that is adjacent to a Flood Tile.
    • If a space is adjacent to multiple Flood Tiles, it still only counts as a single space, and thus only 1 bonus tree.
  2. Decrease the lifetime of the flood by 1 on the tracker, by moving the die 1 space to the left. This happens AFTER you have collected any bonus trees from step 1.
    • After 2 of your turns, when the die reaches the final space, marked "Remove", the rain stops and the flood dries up.
    • When the flood dries up, remove all Flood Tiles from the board and discard this power along with all of its components.

Example

In this scenario, the Aspen player would gain 6 extra trees at the start of their turn, since their opponent controls 6 spaces that are adjacent to one of the Flood Tiles.

Example (Flood Over Two Turns)

  • On their previous turn, the Aspen player placed these 3 Flood Tiles.
  • At the start of their current turn, they gain 2 extra trees since the Pine player controls 2 spaces adjacent to the Flood Tiles.
  • They also decrease the lifetime on the tracker by 1 by moving the die 1 space to the left.
  • Feeling pressure to expand and avoid getting cut off, the Pine player expands outward, over the Aspen player's Flood Tiles.
  • Now on their turn, the Aspen player gets a total of 6 extra trees. They then decrease the lifetime of the Flood again.
  • Reaching the final space on the tracker, the flood dries up and all its tiles are removed.

Gusting Winds

Overview

Plant your trees farther away, based on the strength of the Wind Gust, for a single turn.

  • This enables you to reach new areas quickly, or even "jump" over blockages of your opponent's trees, to expand into areas you have been cut off from.

How It Works

The value of the Gusting Winds Die determines the Wind Gust "Strength". When planting new trees, this is the number of spaces away you can plant from your existing spaces.

When You Activate the Power

On your turn, when planting trees:

  1. You may plant any of your trees up to the number of spaces away defined by the Wind Gust Strength.
    • For example, if the Gust Strength is 3, you can plant 3 spaces away from your existing spaces.
    • For reference: planting adjacent is considered a "distance" of 1.
    • All other planting rules still must be followed (see base game).
    • Your planting MUST still follow the valid Wind directions, and you must plant outward starting from a space you control.
    • You may, however, use MULTIPLE Wind directions when planting a single tree.
  2. Discard this power at the end of your turn, after using it.

Example

The Aspen player has 8 trees on their turn and wants to make a big move. They first use the Wind Gust to plant a tree 3 spaces away following NW, NW, NE (since the Wind Gust Strength is 3).

Then they plant 2 trees normally, following East from the tree they just planted using the Wind Gust.

Example (Continued)

Then they plant another tree, using the Wind Gust, 3 spaces away following NW.

Finally, they plant another tree, 2 spaces away with the Wind Gust.

And then they plant 3 trees normally, following East from the tree they just planted, to cut off the Pine player completely.

SunBeam

Overview

BOTH players get increasing chances of extra trees for each space they control adjacent to the Sunbeam.

  • The more spaces you control surrounding the Sunbeam, the better. So plan and place it strategically to maximize your advantage.

How It Works

The value of the Sunbeam Die is the "Strength" the Sunbeam starts at.

When You First Activate the Power

Take the Sunbeam tile that has the same value as the die, and place it on any empty space on the board.

Every Time the Sun Die Is Rolled by Either Player

  1. First, check to see if the Sunbeam produces extra trees. BOTH players get 1 tree for each adjacent space they control when the Sun Die roll is LESS THAN OR EQUAL TO the Sunbeam Strength (the current number on the top of the stack).
    • If the Sun Die roll is GREATER THAN the Sunbeam's current Strength, no extra trees are produced by the Sunbeam for any player.
  2. Secondly, after each roll of the Sun Die, add the next tile to the Sunbeam stack, increasing its Strength by 1.
    • Tiles are always added in increasing order, e.g. (2 > 3 > 4 > 5 > 6).
    • When you go to add another tile to the Sunbeam in this step, and there are no higher value tiles remaining, the Sunbeam has reached its maximum strength and faded. Remove the Sunbeam stack entirely from the board and discard this power.

Example

The Sunbeam produces extra trees because the Sun Die value of 4 is equal to the Sunbeam's current Strength of 4.

  • The Aspen player gets 3 trees for the 3 adjacent spaces they control.
  • The Pine player gets 1 tree for the 1 adjacent space they control.

Example (Continued)

  • After placing the Sunbeam on a previous turn, the Aspen player rolls a 5 on the Sun Die. And thus, their Sunbeam (Strength 4) does not produce any trees.
  • The Aspen player adds the next tile (5) to the Sunbeam stack.
  • The Pine player rolls a 3 on the Sun Die, and Aspen's Sunbeam produces trees.
  • The Aspen player adds the next tile (6) to the Sunbeam stack.
  • The Aspen player rolls 6 for Sun, and their Sunbeam produces trees.
  • There are no more tiles to add to the Sunbeam. So the Aspen player removes it.

Mudslide

Overview

Spread across the board, through empty spaces and your opponent's territory, ignoring the Wind to reach new areas and even destroy your opponent's trees along the way.

  • But beware: You will have to sacrifice your own trees to make these powerful moves.

How It Works

The value of the Mudslide Die determines the "Lifetime" of the Mudslide, which is how long it will stay active.

When You First Activate the Power

  1. Place the Mudslide Die on the space of the tracker that has the same value.
  2. a. Place a Mudslide tile on any space adjacent to one you control that is either empty or controlled by your opponent.
    • The Wind is not used when placing Mudslide tiles. You can place them in any direction.
    • You CANNOT place the tile adjacent to a starting water tile.
    • b. Lay 1 of your trees from your hand on the tile.
    • If you placed the Mudslide tile on a space controlled by your opponent, lay their tree(s) back on top of the tile with yours.

The starting space can be empty, or occupied by your opponent's trees. Starting space is empty: place the tile and lay 1 of your trees on it. Starting space is occupied: place the tile on top of the opponent's trees and lay your tree on it, which returns their tree(s) back on top of the tile with yours.

Mudslide: While the Mudslide Is Active

On any of your turns (including the turn you started it), you may EXTEND the Mudslide by placing additional connected tiles. To extend the Mudslide:

  1. Place a Mudslide tile on a space adjacent to any other Mudslide tile.
    • This space must be empty, OR controlled by your opponent.
    • You do NOT have to follow the Wind when placing the tiles.
    • This space CANNOT be adjacent to a starting water tile.
    • This space CANNOT have a weather effect marker tile already on it (for example a Cold Snap or Sunbeam tile).
  2. Lay 1 of the trees from your hand on the Mudslide tile.
    • You MUST be able to place a tree on the tile to place the tile.

You can extend the Mudslide as far, and in any direction you want, as long as you follow the above rules and have Mudslide tiles remaining. Once you have placed all the Mudslide tiles, you cannot extend it any further.

Planting Outward From the Mudslide

  • Mudslide spaces with YOUR tree on them are considered yours. This means you can plant adjacent to these spaces following the normal placement rules of the "Plant" phase of your turn.
  • Mudslide spaces with BOTH players' trees on them are considered controlled by both players. This means either player can plant normally adjacent to them.
  • When planting outward from a Mudslide tile, you MUST follow the current valid Wind directions and all the normal planting rules for your turn.

Each Turn While the Mudslide Is Active

At the start of each of your turns, before taking any actions, decrease the Mudslide's lifetime by 1 on the tracker.

  • You do not do this on the turn you first activated the Mudslide.
  • When the die reaches the final space, the Mudslide dries up.

When the Mudslide Dries Up

  1. Remove ALL trees from each space with a Mudslide tile, returning them to their respective owner's bags. These spaces are now owned by neither player, since they have no remaining trees on them.
  2. Remove all Mudslide tiles from the board, and discard the power.
    • Resolve any resulting Cascades (see p. 8 of base game rules).

Example

The Aspen player has been surrounded by the Pine player, putting them in a tough position.

They use 4 of their Mudslide tiles to cut through Pine's line and pop out the other side.

On that same turn, they use the Wind to plant their remaining trees to get in front, and instead cut the Pine player off.

On the Aspen player's following turn, they extend the Mudslide again, and plant outward to close off the Pine player fully.

Mudslide Edge Cases

  • Spaces with Mudslide tiles are considered temporarily under control, because all the trees on them are removed when the Mudslide dries up.
    • This means Mudslide spaces are not considered "boundaries", and thus you CANNOT create a Cascade using them (p. 8 of base game rules).
  • An area "surrounded" by Mudslide tiles is not considered "cut off", because the spaces are only under temporary control and all the trees will be removed once the Mudslide dries up.
  • If the game ends with a Mudslide still active, resolve the Mudslide immediately by removing it, and all players' trees from those spaces, BEFORE determining the winner. Neither player controls those spaces now, and thus neither gets to count them towards their end score.
  • In a RARE case, resolving a Mudslide can actually create a Cascade.
    • Always evaluate the board state after resolving a Mudslide: if the conditions for a Cascade exist (see base game rules), then a Cascade is created, and the surrounded area gets filled in by the corresponding player, according to the rules in the base game.
    • This can happen during, or even after, the game has ended, as described above when the game ends with a Mudslide still active.

Example

The Aspen player has "cut off" this area of the board, making it currently unreachable for their opponent. But, an area "surrounded" by Mudslide tiles is not considered "cut off", because the spaces are only under temporary control and all the trees will be removed once the Mudslide dries up.