RulesPal
Chat
Rulebook
Advanced Vive l'Empereur thumbnail

Advanced Vive l'Empereur

Advanced Vive l'Empereur Rulebook

Table of Contents

Table of Contents

  • 1.0 Components
    • 1.1 Armies
    • 1.2 Dice
  • 2.0 The Battlefield
    • 2.1 Terrain Hexes
    • 2.2 Terrain Types
  • 3.0 Command Cards (10 each)
    • 3.1 Order Cards (7 each)
    • 3.2 Automatic Order Cards (3 each)
  • 4.0 Setting Up for Scenarios
    • 4.1 Length of the Battle
    • 4.2 How to Win
  • 5.0 Start of the Battle
    • 5.1 Battle Round
  • 6.0 Movement
    • 6.1 Restrictions on Unit Movement
    • 6.2 Zone of Control (ZOC)
    • 6.3 Moving Generals
  • 7.0 Combat
    • 7.1 Combat Procedure
    • 7.2 Fire Value (FV)
    • 7.3 Range of Fire
    • 7.3.10 Generals in Battle
    • 7.4 Line of Sight (LOS)
  • 8.0 Terrain
    • 8.1 Woods Hex
    • 8.2 Orchard Hex
    • 8.3 Hill Hex
    • 8.4 Hexes with Buildings
    • 8.5 Stream or Marsh Hex
    • 8.6 Bridge or Road Hex
    • 8.7 Cultivated Field Hex
    • 8.8 Impassable Terrain
  • 9.0 Combat
  • 9.1 Effects of Combat
  • 9.2 Modifications to the "Fire Value"
  • 9.3 Special Actions
    • 9.4 Hitting / Capturing Generals
  • 10.0 Retreats
    • 10.1 Retreat Rules
  • 11.0 Misses
  • 12.0 Recovery of Lost Elements (Rally)
    • 12.1 Attached General
  • 13.0 Victory Conditions
  • 14.0 Scenarios
    • 14.1 Waterloo
    • 14.2 Quatre Bras
    • 14.3 Ligny
    • 14.4 Hypothetical Battle Scenario
  • 15.0 Morale (Optional Rule)
  • Errata
  • Reference Sheet

1.0 Components

  • 1 map, 67 x 49.5 cm, printed on both sides
  • 180 die-cut terrain hexes (4 sheets)
  • 3 sheets of army counters
  • 1 sheet of order cards
  • 8 special dice (5 black, 3 white)
  • 1 sheet of dice labels
  • 1 six-sided die and 1 ten-sided die
  • 200 plastic chips in 3 colours
  • 93 plastic bases
  • 3 scenarios: Waterloo, Ligny and Quatre Bras
  • 1 hypothetical battle scenario

1.1 Armies

Armies are made up of three types of unit: infantry, cavalry and artillery.

Each unit is represented by a base and by a number of chips placed beneath it. The base and the chips are collectively called elements. The number of elements that make up a unit represents the strength of that unit.

  • Infantry: each infantry unit is made up of 4 elements: 1 figure on a base and 3 discs. Up to 6 types of infantry are available (see the Reference Sheet for details).
  • Garrisons: 1 element only, represented by a square figure without a base.
  • Cavalry: each cavalry unit is made up of 3 elements: 1 figure on a base and 2 discs. The cavalry unit may be "light", "line" (Dragoons/Lancers) or "heavy".
  • Artillery: each artillery unit is made up of 3 elements: 1 figure on a base and 2 discs. The artillery unit may be "medium" or "heavy".
  • Horse artillery: horse artillery is considered "light" and is made up of 3 elements: 1 figure on a base and 2 discs.

1.2 Dice

Vive l'Empereur uses, in addition to a 1d6 and a 1d10, special six-sided dice that show illustrations instead of the usual numbers.

  • 5 black dice (command dice). Each of the 5 black dice receives the following labels: 1 flag (black background), 1 general (white background), 1 cavalry (yellow background), 1 cannon (red background) and 2 infantry (blue background).
    • In the command phase, ONLY units of the type shown by the dice roll can be moved and made to fight.
  • 3 white dice (for "Special Actions"). Each of the 3 white dice receives 2 French flags, 2 English flags and 2 Prussian flags.
  • 1 ten-sided die used for combat.
  • 1 six-sided die used for the effects of combat.

2.0 The Battlefield

The battlefield is a hex map 21 hexes long and 13 hexes deep.

The field is divided into 3 sections by two marked lines, giving each player a central sector, a right flank and a left flank.

2.1 Terrain Hexes

Some hexes, each representing a different type of terrain, are placed on the map to recreate the terrain indicated for each battle.

2.2 Terrain Types

  1. Woods
  2. Orchard
  3. Hill
  4. Cultivated fields
  5. Impassable terrain
  6. Stream or river crossing
  7. Bridge
  8. Buildings: farms, villages and fortified buildings
  9. Marsh
  10. Roads

3.0 Command Cards (10 each)

The units of an army can move and/or fight ONLY when they are activated by an order.

Command cards are used to designate either the sector in which attacks will be concentrated in the current round (order cards), or the type of unit to which an order is directed (automatic orders).

3.1 Order Cards (7 each)

Order cards are used to order 5 or 6 units to move and/or fight.

These cards indicate the sector of the battlefield to which an activation order is given. Order cards may be used for any unit or General in the indicated sector.

Each player has 2 cards for each sector (orders for 5 units), plus 1 "coordinated attack" card (orders for up to 2 units per sector).

3.2 Automatic Order Cards (3 each)

These cards allow the unit type shown on the card to move and/or fire.

  • Infantry Manoeuvre (one each): up to 5 units in one sector may move 1 hex and fight, or move up to 3 hexes without fighting.
  • Cavalry Grand Charge (one each): up to 5 units may move on the map.
  • Artillery Bombardment (one each): each artillery unit may double its fire value (before modifiers), or move up to 2 hexes (4 hexes for horse artillery).

4.0 Setting Up for Scenarios

  • Historical: place the terrain and units as specified in the instructions for each scenario.
  • Semi-historical: place the terrain as indicated. Players alternate placing units: the allied player places 3 units and the French player places 2 units. The first 3 units are placed by the allied player.

4.1 Length of the Battle

Each player takes his own 10 command cards and chooses 6 of them (1 complete turn of play, representing about 1 to 2 hours of combat).

In the following turn, he uses the 4 cards not chosen in the previous turn plus 2 others of his choice from those used in the turn just ended.

Up to a maximum of 6 complete turns are played, unless the victory conditions indicated in each scenario are met first.

4.2 How to Win

  • A "decisive" victory is obtained when an opponent no longer has units in one of the 3 sectors.
  • A "substantial" victory is obtained by eliminating half of the enemy's units (rounded up).
  • If, at the end of the sixth turn of play, neither army has been defeated decisively or substantially, a "marginal" victory is obtained by the player who has lost fewer units than the opponent.
  • In case of a further tie, the player with more "elements" on the battlefield is the winner.

Historical scenarios have particular victory conditions (see from 14.0).

5.0 Start of the Battle

Each turn of battle is divided into 6 rounds, each representing about 10 to 20 minutes of real time.

5.1 Battle Round

  1. Simultaneously, play one card.

  2. Roll 5 or 6 command dice (if an order card has been played). If the card played is of the "automatic order" type, do not roll the dice.

    Take the chips corresponding to the results of the dice roll.

    • If the die result shows the "flag", the order may be assigned to any unit in the sector indicated by the card.
    • If the die result shows the "General", the order may be assigned to any General, or unit with an attached General, anywhere on the map.
  3. Alternate in giving orders to units (one unit at a time, each player in turn).

    The first to move is a unit of the army that has more units able to carry out the order of the card played. If equal, the French player moves first (or as indicated in the historical scenarios).

    If an "automatic orders" card is played, it has priority over the "orders" card. If both players play an "automatic orders" card, the order of movement is as above.

    It is NOT possible to play the same "automatic orders" card in two consecutive rounds (the last round of one turn and the first round of the next).

    The corresponding chip is placed on the unit that has been assigned the order.

  4. The unit to which an order has been assigned may move and/or fire. Resolve combat: losses and retreats.

  5. Repeat steps 3 and 4 until the orders given by each player have been completed.

  6. Return to step 1.

    If the cards have run out, form the new set of 6 cards.

    Only units that have been activated (marked with the corresponding chip) may move and/or fire or fight.

A unit can NOT be activated more than once per round of play (exception: if a unit has already been activated, it may nevertheless react to a cavalry charge; see "Special Actions" 9.3).

Note: Generals, if attached, may take part in a combat even if they have not been activated.

6.0 Movement

The unit to which an order has been assigned may move and/or fire, or recover lost elements (see 12.0).

Infantry:

Possible formations: Combat and Square.

  • An infantry unit in combat formation may move 1 hex and fire, or move 2 hexes but NOT fire.
  • If an infantry unit changes formation, it may NOT move and/or fire.
  • The square formation is allowed only on open terrain (not on hexes with a bridge) or on a hill. An infantry unit in square may NOT move, but may still fire.

Garrisons: a garrison unit may not move, but may be reabsorbed (up to a total of 4 elements) by another unit that moves into its hex.

Infantry units may, during movement, "leave" garrison elements in hexes with buildings (farms, villages, fortified buildings): replace a disc with a figure. A garrison that is eliminated does not count as a victory point.

A garrison unit does NOT exert a zone of control (6.2) and ignores retreat results.

Cavalry: moves up to 3 hexes and/or fights.

A cavalry unit may move into hexes with buildings not occupied by a unit, but it may NOT fire, nor begin a charge from them (see 7.3).

Artillery: moves 1 hex or fires. In the same hex, it may change its front and fire.

Horse artillery: moves up to 2 hexes and/or fires, and is considered an artillery unit for all other purposes.

Generals: move up to 3 hexes.

Road: each unit that moves entirely along a road moves one extra hex more than normally allowed.

  • Infantry may move 2 hexes and fire, or 3 hexes without firing.
  • Cavalry may move 4 hexes and fight.
  • Artillery may move 2 hexes without firing. Horse artillery may move 3 hexes and fire.
  • A General may move 4 hexes.

6.1 Restrictions on Unit Movement

A unit may NOT move into a hex that contains friendly or enemy units.

Exception: infantry and cavalry units may move through artillery units.

At the end of movement, ONLY one unit may be present in the hex.

A unit may enter a hex that contains ONLY a friendly General, but its movement ends there.

6.1.1 A unit is NOT allowed to split (exception: leaving garrisons in hexes with buildings). All figures of a unit must always move together.

6.1.2 Some terrains block movement and do not allow a unit to complete its entire movement (8.0). Exception: Retreats (10.0).

6.2 Zone of Control (ZOC)

A unit MUST stop when it enters a hex adjacent to enemy units.

A unit adjacent to enemy units may move, but may NOT do so by moving through hexes adjacent to enemy units, nor by ending its movement in another hex adjacent to enemy units. Except for retreats (see 10.0).

6.2.1 Front of a unit. The front of a unit (indicated on the figure by a triangle at the top right) is used to determine the frontal arc (3 hexes) and the line of sight. When combat is against an enemy unit in an adjacent hex, rotate the front toward the attacked unit.

6.2.11 Determine the front of a unit either at the end of its movement or before an attack. A unit may only fire at a unit within its line of sight and within its own frontal arc (see LOS 7.4).

6.2.12 The diagram shows the frontal arc of the unit, with the front indicated by the black arrow. The other 3 adjacent hexes determine the flank and rear of the unit (see diagram on page 5).

6.2.13 A unit may change its front only if it has been activated, must retreat, or has successfully reacted to a cavalry charge (see 9.3 Special Actions).

Artillery units may change front before firing.

6.3 Moving Generals

A General may NOT move into a hex containing enemy units or Generals.

A General may pass through hexes containing friendly units, but may not end its movement in a hex already containing a friendly General (7.3.16).

6.3.1 Attached Generals. A General in the same hex as a friendly unit is considered "attached" to that unit.

6.3.11 No more than one General may be attached to the same unit.

6.3.12 An attached General who has been given an order may move, leaving the unit to which he was attached and attaching to another unit.

6.3.13 If a unit with an attached General is given an order, the General may move with the unit or remain in the hex. A General who moves together with a unit must stay with the unit for the entire movement.

7.0 Combat

After completing its movement, a unit that is sufficiently close to the enemy, and in a position to see it, may fire.

See Range of Fire (7.3) and Line of Sight (7.4).

Units may change front (see 6.2.1) at the end of movement and/or before firing, so as to have the enemy unit in their Line of Sight and in their frontal arc.

7.0.1 Each unit may fire only once per round (except for "Special Actions", see 9.3).

7.0.2 Each unit may fire only at a target in one hex and may not divide its shots among different units.

7.1 Combat Procedure

  1. Determine the distance from the enemy (7.3).
  2. Determine the line of sight (7.4).
  3. Determine the terrain type of the target and of the firing unit.
  4. Determine the "Fire Value" (7.2).
  5. Roll the 10-sided die (9.0).
  6. Roll the 6-sided die to check the effects of combat (9.1).

A unit may fire ONLY at units in its own frontal arc.

When a cavalry unit attacks an adjacent enemy unit, its front must be adjacent to the attacked unit (6.2.12).

Exception: units in "buildings" or in "square" may fire in any direction.

7.2 Fire Value (FV)

The "fire value" of each unit is shown on the Reference Sheet.

The fire value may be modified by the distance to the target, by the terrain from which the fire is delivered, by the terrain in which the target is positioned, and by any other situations. See 9.2.

Important: the number of elements in a unit has NO effect on the "Fire Value". The unit fires or fights regardless of the losses it has suffered. However, an infantry unit can NOT cause more losses than the elements it has left.

Example: a French infantry unit (FV = 9) has been left with only one element: the figure on its base. The unit, with a General attached (+2), fires on the flank (+4) at an adjacent unit, for a total fire value of 15. Even though the effects show 2 losses, the enemy will suffer only one loss.

7.3 Range of Fire

Infantry: 2 hexes. An infantry unit may fire at an enemy unit that is in its frontal arc within 2 hexes.

The adjacent hex is considered "short range"; a hex 2 hexes away is "medium range".

Garrison: 1 hex. Garrisons fire ONLY at short range, and have a fire value of 4 to which NO modifiers apply.

Infantry and garrison units MUST fire at the nearest enemy unit. If enemy units are equidistant, the attacker decides the target.

Medium artillery: 4 hexes (5 from a hill*). A medium artillery unit may fire at an enemy unit that is in its frontal arc and 4 hexes or fewer away.

Heavy artillery: 5 hexes (6 from a hill*). A heavy artillery unit may fire at an enemy unit that is in its frontal arc and 5 hexes or fewer away.

Horse artillery: 3 hexes (4 from a hill*). Horse artillery may move up to 2 hexes and fire at an enemy unit that is in its frontal arc and 3 hexes or fewer away.

(*) The range is increased if the target is positioned in a hex one level lower.

Cavalry: only if adjacent. A cavalry unit may fight against an enemy unit ONLY if that unit is in its frontal hex and is adjacent.

A cavalry unit may charge (move adjacent to enemy units by the shortest route), but only units that were in its frontal arc at the start of movement and in Line of Sight. Furthermore, cavalry may NOT attack units in hexes with buildings, nor units starting from buildings (8.4).

7.3.10 Generals in Battle

7.3.11 A cavalry or infantry unit with an attached General has a modifier of +2 in combat (adjacent only).

7.3.12 An artillery unit receives NO bonus if a General is attached to it.

7.3.13 A General does NOT increase the range of fire of the unit to which he is attached.

7.3.14 A General may move into a hex containing a friendly unit; if that same unit is given an order during the same battle round, the General will move and fight with the unit.

7.3.15 A General who is alone in a hex may NOT attack.

7.3.16 Only ONE General is allowed in a hex.

7.3.17 An infantry or cavalry unit with an attached General may ignore retreat results.

Note: a General who is NOT attached to a unit may be captured (see 9.41).

7.4 Line of Sight (LOS)

A unit must be able to see the enemy in order to fire at it or to carry out special actions. This ability is known as "line of sight".

7.4.1 Imagine a straight line joining the centre of the hex of the firing unit with the centre of the hex of the enemy target unit.

7.4.2 This line of sight is blocked ONLY if a hex, or part of a hex, between the attacking unit and the target unit contains an obstruction.

7.4.3 Obstructions include units or Generals (whether friendly or enemy), hexes of woods, cultivated fields, hills or buildings. The terrain in the target hex does NOT block the line of sight. See the diagram on page 5.

8.0 Terrain

The hexes, each representing one type of terrain, are placed on the map as indicated in the scenario.

8.1 Woods Hex

Movement: a unit that enters a woods hex MUST stop.

Combat: a unit may fire or fight in the battle round in which it has moved into the woods hex.

  • When firing FROM a woods hex: -1 to the "fire value".
  • When firing AT a unit in a woods hex: -2 to the "fire value".

Line of sight: the woods hex BLOCKS the LOS.

8.2 Orchard Hex

Movement: no restriction on movement.

Combat: when firing at or through a unit in an orchard hex: -1 to the "fire value".

Line of sight: the orchard hex does NOT block the LOS.

8.3 Hill Hex

Movement: no restriction on movement.

Combat: when firing at a unit in a hill hex: -2 to the "fire value". This modifier also applies if the firing unit is in an adjacent hill hex.

An artillery unit firing from a hill has its range of fire increased by 1 hex, with the "fire value" of the maximum distance.

An artillery unit firing from a hill is not blocked in its line of sight by friendly units or Generals located in an adjacent hex, provided that such hex does not contain a type of terrain that blocks the LOS.

Line of sight: the hill hex BLOCKS the LOS.

8.4 Hexes with Buildings

Movement: a unit that enters a hex of buildings MUST stop.

Exception: NO, if crossed by a road.

Combat: a unit may NOT fight in the round in which it enters a hex of buildings.

  • When firing FROM a farm hex: -1 to the "fire value".
  • When firing AT a unit in a farm hex: -2 to the "fire value".
  • When firing FROM a village hex: -2 to the "fire value" (not permitted to cavalry).
  • When firing AT a unit in a village hex: -3 to the "fire value".
  • When firing FROM a fortified building hex: -3 to the "fire value".
  • When firing AT a unit in a fortified building hex: -5 to the "fire value".

Units in buildings may NOT be attacked on the flank or rear.

Cavalry may NOT attack units in buildings, nor attack units from hexes with buildings.

A cavalry unit occupying a hex with buildings is considered dismounted infantry, with a fire value like that of a garrison (FV = 4).

Infantry may fire at units in buildings ONLY from an adjacent hex.

Note: artillery in a hex with buildings is considered "entrenched" and uses only the defensive modifiers indicated in the "Terrain Effects" table (that is, -2, -3 and -5). Entrenched artillery ignores both the modifiers for firing from a building (-1, -2 and -3) and the modifier for fire received from enemy artillery (-2).

Line of sight: the hex with buildings BLOCKS the LOS.

8.5 Stream or Marsh Hex

Movement: a unit that enters a stream or marsh hex MUST stop.

Combat: when firing FROM a stream or marsh hex: -2 to the "fire value". Artillery does NOT fire from these types of terrain.

Line of sight: a stream or marsh hex does NOT block the LOS.

Note: a river hex that can be crossed only by a bridge blocks the LOS.

8.6 Bridge or Road Hex

Movement: treat as open terrain.

A "square" formation is not permitted.

Movement along a road is interrupted by the bridge hex.

Combat: no restriction.

Line of sight: a bridge or road hex does NOT block the LOS.

8.7 Cultivated Field Hex

Movement: no restriction.

Combat: when firing at a unit in a cultivated field hex: -1 to the "fire value".

Line of sight: a cultivated field hex BLOCKS the LOS.

8.8 Impassable Terrain

Movement: NOT permitted.

Combat: NOT permitted.

Line of sight: an impassable terrain hex BLOCKS the LOS.

9.0 Combat

Check that the enemy unit is in your unit's "frontal arc". Determine the "fire value", making the due modifications (8.0 and 9.2).

Roll the 10-sided die.

To hit the enemy, the result of the die must be equal to or less than the fire value.

If the final "fire value" exceeds "10 or 20", this is one or two automatic hits; roll the die to try to obtain one further hit.

Example: fire value after modifications: 16 = 1 automatic hit and a die roll. With a result of 1 to 6, one further hit is obtained.

9.1 Effects of Combat

Roll the 6-sided die and consult the "Effects of Combat" table, cross-referencing the result of this die with the column for the number of hits inflicted on the target.

The first number represents the number of losses inflicted; the second number refers to the number of hexes of retreat of the enemy unit (facing the enemy).

9.1.1 The figure on its base is always the last to be removed.

Once a unit loses its last figure, that figure is given to the opponent to check the victory conditions.

9.1.2 If an attacker hits more elements than are available, these additional hits are not counted.

9.1.3 Pursuit. If the enemy unit is destroyed or forced to retreat, cavalry must take a morale test (see 15.0 below). If the test is failed, the unit must advance into the hex left free by the enemy unit, unless this would break the ZOC rule (6.2).

9.2 Modifications to the "Fire Value"

General attached to Infantry and Cavalry: +2* *to be applied ONLY when adjacent to the enemy.

Modifications for infantry:

  • Fire on square / flank / rear: +4 (adjacent only).
  • Fire from square: -6.
  • Fire on medium artillery at medium range: -4 (not allowed if the artillery is entrenched in buildings).
  • Fire on cavalry: -2.

Modifications for cavalry:

  • Charging units on flank / rear: +8.
  • Charging infantry NOT in square (in open terrain or on a hill only): +8.
  • Charging infantry in square: -10.
  • Charging artillery: +8.

Modifications for artillery:

  • Fire on infantry in square: +4.
  • Fire on flank / rear: +4 (adjacent only).
  • Fire on artillery: -2 (not if entrenched in buildings).
  • Fire on cavalry: -2.

Target in a hex of:

  • Orchard and cultivated fields: -1.
  • Woods, hill, farm: -2.
  • Village: -3.
  • Fortified building: -5.

Fire from a hex of:

  • Woods, farm: -1 (ignored for artillery).
  • Village: -2 (ignored for artillery).
  • Stream or marsh: -2 (not permitted for artillery).
  • Fortified building: -3 (ignored for artillery).

9.3 Special Actions

A) Opportunity fire from cannon. B) Cavalry counter-charge. C) Forming square.

These actions may be attempted when a cavalry unit charges by moving into a hex adjacent to the unit.

For a unit to carry out the special actions, the enemy cavalry unit must, during its movement, START or PASS THROUGH a hex of the frontal arc of the charged unit.

A unit may NOT react to a cavalry attack that is already adjacent to it.

If cavalry charges a unit on the flank or rear, without passing during its movement through a hex of the frontal arc of the charged unit, the latter may not react.

The chance of success depends on the empty hexes that separate the two units.

Proceed as follows:

  1. Roll one "special actions" die for each hex traversed by the cavalry.

    Important: consider only hexes in the Line of Sight (LOS) of the charged unit.

  2. If the result of the dice shows a flag that corresponds to its own army, the attempt has succeeded, and therefore:

    • The artillery will fire automatically on the first column of the "Effects of Combat", BEFORE the cavalry comes into contact. If the result is retreat (1-2-5-6), the cavalry stops in the adjacent hex without fighting. With a result of 3 or 4, the cavalry unit suffers a loss and, if it survives, may charge the enemy artillery with all the relevant modifiers (see 9.2).
    • The charged cavalry may counter-charge. The combat is simultaneous.
    • The infantry may form square (but may not fire).

Units that successfully carry out "special actions" may rotate in their hex to face the enemy.

Units that fail the "special actions" may NOT change the front of the unit.

If a cavalry unit moves adjacent to 2 or more units, the unit charged will be the one directly adjacent to the front of the cavalry unit.

Units that have used "special actions" may NO LONGER move/fight or carry out "special actions" during this battle round.

9.4 Hitting / Capturing Generals

A General may be hit when he is attached to a unit.

Each time the unit suffers a loss, roll the 10-sided die. With a result of 1, the General has been hit: remove him from the game. If a unit suffers 2 losses from a single fire, the General will be hit on a 1 and a 2.

If a General is hit, the unit MUST retreat one further hex.

9.4.1 CAPTURE of a General. A General who is alone in a hex does NOT control it and does not exert any Zone of Control in the adjacent hexes.

9.4.2 When an enemy unit enters a hex with a friendly General, the General must retreat. Each hex into which the General is forced to retreat carries a +1 modifier to the capture attempt.

Roll 1d10: the General is captured if the result of the die is equal to or less than the capture value.

Example: a cavalry unit is adjacent to an enemy General only in that hex. The cavalry moves, pursuing the fleeing General for 3 hexes. With a result of 1-2-3, the General is captured.

9.4.3 When a General is killed or captured, he is considered an enemy unit eliminated for the purposes of the victory conditions.

9.4.4 If all the elements of a unit in a hex with a General are eliminated, the General (if he survives) MUST retreat if the result of the combat effects shows 1 or more hexes of retreat.

10.0 Retreats

After losses have been assigned, the unit may be obliged to retreat one or two hexes, as indicated by the "Effects of Combat" table (woods and buildings do NOT block the retreat movement).

The retreat movement takes place while keeping the front toward the enemy, moving into one of the 3 hexes indicated by the diagram (see 10.1).

10.1 Retreat Rules

A unit forced to retreat must do so into one of the 3 available hexes on the rear side. Preferably:

first into A (the hex directly behind, with respect to the direction of fire), then B or C.

When the unit cannot retreat into hex "A", it will choose one of the hexes "B" or "C" following these priorities:

  1. Towards its own map edge.
  2. As close as possible to friendly units.

If the retreats indicated above cannot be carried out, retreat adjacent to enemy units.

The defender decides into which hex the unit will be retreated, following these rules:

A) A unit may NOT retreat into a hex containing another combat unit.

B) If a unit CANNOT retreat, it loses one further element and remains in the same hex.

C) A unit forced to retreat off the map edge is considered a unit that cannot retreat; see point "B" above.

D) Retreated units may NOT move in the same round, but may fire.

E) Units in square, in buildings, or with an attached General are NOT obliged to retreat.

F) Infantry units in square that suffer fire at short range from infantry and artillery convert retreat results into losses.

G) Artillery units that suffer fire / a charge at short range convert retreat results into losses.

H) Artillery units that suffer fire from 2 or more hexes away ignore retreat results.

Note: the retreat diagram labels the three rear hexes A, B and C. Hex A is the one directly behind the unit, in the direction of fire.

11.0 Misses

When a die result is higher than the fire value, between 2 and 9, it is counted as a miss.

If the fire value exceeds 10, see the example in 9.0 (combat).

12.0 Recovery of Lost Elements (Rally)

A unit that has suffered losses and is more than 3 hexes from the enemy, or is in a hex NOT in line of sight of the enemy, may try to recover elements.

  • Roll 3 command dice.
  • If the unit is militia, roll 2 dice.
  • If the unit is elite, roll 4 dice.

1 element is recovered for each die showing a symbol identical to the unit's type.

12.1 Attached General

If the General is attached to the unit attempting the recovery, 1 loss is "recovered" EVEN with each General result (white icon) rolled on the dice.

A maximum of 2 elements may be recovered per attempt, up to the unit's initial value.

13.0 Victory Conditions

Each scenario has particular victory conditions.

In hypothetical battles, the victory conditions indicated in 4.2 apply.

14.0 Scenarios

The game contains 3 scenarios: Waterloo, Quatre Bras and Ligny.

Other scenarios, updated rules and new armies can be found on the official website: www.giogames.it

If you are using the optional "Morale" rule (15.0), the number of units lost that the victory conditions require must be reduced by 20%.

Example: if the scenario indicates as a victory condition the loss of 15 units, this must be reduced to 12.

14.1 Waterloo

Notation used in the unit lists below: the figures in brackets after a unit type are its fire value at short range and at medium range (for example, Guard (12/6)); a single figure is the short-range fire value (for example, light cavalry (9)). This reading is inferred from the Reference Sheet, which gives the same values. The figures are otherwise reproduced as printed.

Terrain: see the printed map.

French units:

  • French infantry (9/5) in D5; E4; F5; G4; K4; K5; L4; L5; N5; O6; Q7; R7.
  • "Elite" infantry (11/6) in L1 and N1.
  • "Guard" infantry (12/6) in M2.
  • Light cavalry (9) in O4 and S7.
  • "Dragoons/Lancers" (12) in B5; O3 and R5.
  • Heavy cavalry (14) in G2; G3 and H3.
  • Medium artillery in C4; I4.
  • Heavy artillery in K2; P6.
  • Horse artillery in Q5.
  • Generals in F5; K4; R6.

Anglo-allied units:

  • Militia infantry (7/4) in B10; K10; N10.
  • Regular infantry (8/5) in G10.
  • English infantry (10/5) in C10; D7; I10; O11.
  • "Elite" infantry (10/6) in E9; H10; M11.
  • Light cavalry (9) in D10; Q12; R12.
  • "Dragoons/Lancers" (12) in H12.
  • Heavy cavalry (14) in I11; L11.
  • Medium artillery in C9; F10 and N11.
  • Heavy artillery in K11.
  • Horse artillery in P11.
  • Generals in B12; H11; P12.
  • Garrisons in D8 and M9.

Special rules: Hougoumont is a fortified building (-5). Only infantry units may occupy Hougoumont.

Victory conditions: the French win if they eliminate 12 English units (by the 3rd turn) or 15 Anglo-Prussian units. The allies win if they eliminate 14 French units.

Prussian reinforcements: 1 General; 8 regular infantry units (8/5); 2 cavalry units: 1 medium (12) and 1 light (9); 2 medium artillery units.

The Prussian vanguard may enter the battle from the 4th turn. At the start of each round, roll one "special actions" die. If the result shows the Prussian flag, 1 unit appears in a hex of your choice from V6 to V12. Roll a battle die to designate the type of unit. If the die roll shows a flag, the unit may be chosen freely. If the die roll shows a unit type that is not available, no unit enters the map.

From the 5th turn, at every round, before playing a card, 2 units of the player's choice (from those still available) appear on the map and move before any other unit, without the need to play "order cards". Units already on the map will need "order cards" to be moved.

The entry hex is determined by rolling 1 six-sided die for each unit: 1-3 = V5; 4 = V9; 5 = V11; 6 = T13.

14.2 Quatre Bras

Terrain: arrange the hexes as shown in the diagram.

French units:

  • Infantry (9/5) in B6; C5; G4; H4; L4; N4; Q4; R4.
  • Light cavalry (9) in G2.
  • "Dragoons/Lancers" cavalry (12) in L2.
  • Heavy cavalry (14) in N2.
  • Medium artillery in H5; K4 and M4.
  • Horse artillery in M2.
  • Generals in C3; K3; N2.

Anglo-allied units:

  • Militia infantry (7/4) in E9 and N9.
  • Regular infantry (8/5) in E7; F7; H8.
  • English infantry (10/5) in N8 and Q7.
  • "Elite" infantry (11/6) in K10 and L9.
  • Light cavalry (9) in G8 and K12.
  • Medium artillery in K9 and P7.
  • Generals in E10; G8; I10.

Anglo-allied reinforcements:

  • At the start of the 4th turn: militia infantry (7/4) in A12.
  • At the start of the 5th turn: "elite" infantry (11/6) in I13 and K13.

Special rules: streams may be crossed anywhere on the map, subject to the restrictions in the rules. The lake is impassable but does NOT block line of sight.

Victory conditions:

  • Decisive victory: the French win immediately if they capture Quatre Bras (hexes H11, I10 and I11).
  • Substantial victory (to be checked at the end of the current turn): the French win if they eliminate 8 English units. The English win if they eliminate 8 French units.

Map key (as printed with this scenario): Woods, Hill, Stream, Lake, Village, Farm, Main road.

14.3 Ligny

Terrain: arrange the hexes as shown in the diagram.

French units:

  • French infantry (9/5) in B7; D6; D5; E3; K5; M6; O6.
  • "Elite" infantry (11/6) in E2 and G2.
  • Guard (12/6) in F2.
  • Light cavalry (9) in A7; P5.
  • "Dragoons" cavalry (12) in S4 and U4.
  • Heavy cavalry (14) in E1; I1; Q4.
  • Medium artillery in C6 and N6.
  • Heavy artillery in I5 and L5.
  • Horse artillery in P4.
  • Generals in A5; M4; Q3.

Prussian units:

  • Regular infantry (8/5) in G11; H12; I11; L10; F8; H9; K9; L8; R11; R9; T8; U8.
  • Light cavalry (9) in K11 and V9.
  • "Dragoons" cavalry (12) in C10.
  • Medium artillery in G8; I9; S8.
  • Horse artillery in L11.
  • Generals in D11; I12; S9.
  • Garrisons in E7; F5; K7; L7; Q8; R5; T5.

Special rules: streams may be crossed anywhere on the map, subject to the restrictions in the rules.

Victory conditions: the French win if they eliminate 9 Prussian units. The Prussians win if they eliminate 11 French units.

Map key (as printed with this scenario): Hill, Stream, Town, Main road.

14.4 Hypothetical Battle Scenario

Map: the map shows the 4 hexes of depth within which each player places his units. The 5 central hexes form the contested zone. The three zones are labelled on the map as the Allied zone, the contested zone and the French zone.

Victory conditions: decisive: see 4.2. Substantial: 9 units destroyed. Marginal: see 4.2.

Determining the terrain: use only the following terrain types from "sets 1 and 2": Woods (30), Town (9), Cultivated fields (2), Impassable terrain (2), Orchard (2), Hill (24), Farm (4).

Each player takes 15 of them at random, and places 10 in his "friendly" zone and 5 in the contested zone. The players alternate placing 3 hexes each.

Units available: each player has 18 units and 3 Generals.

  • 10 infantry units: 8 regular (8/5) and 2 "elite" (11/6).
  • 5 cavalry units: 3 light (9) and 2 heavy (14).
  • 3 artillery units (1 medium, 1 heavy and 1 horse).

Unit placement:

  • Each player rolls 1 six-sided die for reconnaissance.
  • If the difference is 1 or 2: the loser places 3 units, the winner places 2 units at a time.
  • If the difference is 3 or 4: the loser places 4 units, the winner places 2 units at a time.
  • If the difference is 5: the loser places all his units first.
  • If the result of the die is even: place a screen to hide the respective placements.
  • Place AT LEAST 4 units per sector.

Initiative: the player with the higher reconnaissance value has the initiative in all cases of equality. If the reconnaissance values are the same, decide the initiative randomly with a die.

Reinforcements: maximum 4 units each.

Reinforcements may enter the map at the start of each round of every turn from the 3rd turn onwards, before drawing the 6 cards. Units enter (2 on the 3rd turn, 1 on the 4th turn and 1 on the 5th turn) in one of the map-edge hexes (including the side edges) of the friendly zone. The sector and the reinforcement unit are determined at random.

Roll 1 or 2 "battle dice" at the start of each battle round to determine the type of unit that will enter as a reinforcement. "Flags" and "Generals" are treated as a delay in the arrival of the reinforcements. Retry at the start of the next round.

Roll 1 six-sided die for the entry sector: 1-2 = left flank (SX); 3-4 = centre; 5-6 = right flank (DX).

15.0 Morale (Optional Rule)

Units that, once they have reached the established number of losses (4 for infantry units, 3 for artillery or cavalry units), are to be removed from the table ONLY if they fail a morale test.

Infantry: apply the following formula:

Fire Value (FV) - 4 = Morale value.

If 1d10 > Morale value, the unit is BROKEN.

Example: a French infantry unit (FV 9) suffers 4 losses. 9 - 4 = 5. If the roll of the d10 is 6 or more, the unit is removed from the map.

Cavalry and artillery: apply the following morale values:

  • Light cavalry: 2
  • Dragoons/Lancers: 3
  • Heavy cavalry: 4
  • All artillery units: 3

If 1d10 > Morale value, the unit is BROKEN and is removed.

If the unit passes the morale test, it remains on the battlefield. Its remaining elements have a "Fire Value" of 0 until elements are recovered (see 12.0).

Identify the unit with a chip.

The unit, if activated afterwards, may retreat.

When a unit that has previously passed the test suffers a further loss (the 5th for infantry, the 4th for artillery and cavalry), it is automatically removed from the map.

Units that have passed the morale test, once they have recovered elements (maximum 1), have their "Fire Value" restored.

Important: if the number of losses inflicted exceeds the value set for the test, the unit is immediately removed from the table.

Example: an infantry unit with 3 losses suffers a further 2 losses; remove it immediately from the map.

Errata

The hexes "D6" and "N7" on the map are misidentified.

Reference Sheet

The Reference Sheet of the rulebook gives the following tables.

Unit types (1.1) and fire values. Columns are the range in hexes (short; medium; 1/2 long; long; max) with the hex count for each (1 to 5 hexes). "NO" appears on the row for the distance a unit moves, where the sheet gives no fire value (see 6.0). "-" means no value.

ElementsUnitMovementShort (1 hex)Medium (2 hexes)3 hexes4 hexes5 hexes
4Guard1 and fire126---
4Guard2NONO---
4Elite infantry1 and fire116--

Note on the table: the sheet's column headings are "corta", "media", "1/2 lun", "lunga" and "max" over the hex counts 1 to 5; they are rendered here as short, medium, 1/2 long, long and max. The "Movement" entries are as printed ("e" meaning "and", i.e. move and fire). Cavalry fire values apply only to an adjacent enemy (see 7.3).

Modifications to the fire value (9.2): see section 9.2 above.

Effects of Combat (9.1):

Die1 hit: losses1 hit: retreat2 hits: losses2 hits: retreat3+ hits: losses3+ hits: retreat
1011121
2011222
3102031
410

Terrain (8.0):

TerrainMovementModifier (target / firing from)Line of sight
WoodsStop-2 (-1)Blocked
Orchard--1-
Hill--2Blocked
FarmStop-2 (-1*)Blocked
VillageStop-3 (-2*)Blocked
Fortified buildingStop-5 (-3*)Blocked
Stream / Marsh

The figure in brackets is the modifier for a unit firing FROM that terrain (the sheet's legend: "modifier for the unit firing from the terrain type specified"). The figure before it is the modifier when firing AT a unit in that terrain. (*) Ignored for artillery.

Round of battle (5.1): the six steps are as set out in section 5.1 above.

-
4Elite infantry2NONO---
4English infantry1 and fire105---
4English infantry2NONO---
4French infantry1 and fire95---
4French infantry2NONO---
4Regular infantry1 and fire85---
4Regular infantry2NONO---
4Militia infantry1 and fire74---
4Militia infantry2NONO---
3Heavy cavalry (H)3 and fire14----
3Dragoons/Lancers (M)3 and fire12----
3Light cavalry (L)3 and fire9----
3Heavy artillery0 and fire1810742
3Heavy artillery1-----
3Medium artillery0 and fire16963-
3Medium artillery1-----
3Horse artillery0 and fire1484--
3Horse artillery2 and fire1063--
1General3-----
1Garrisonno4----
2
0
3
1
5112132
6122232
Stop
(-2)
-
Bridge---
Cultivated fields--1Blocked
ImpassableNONOBlocked