RulesPal
Chat
Rulebook
4th Street Baseball thumbnail

4th Street Baseball

4th Street Baseball Rulebook

Table of Contents

Table of Contents

  • Player Ratings
    • Pitcher Cards
    • Hitter Cards
  • Playing the Game
  • Power
  • Ball Park Effects
    • Weather Effects
  • Base Runner Advancement
  • Stealing Bases
  • Holding Runners
  • Hit and Run
  • Sending Runners
  • Bunting
  • Defending the Bunt
  • Infield In
  • Contact Play
  • Injuries
  • Pitcher Fatigue
  • Clutch Hitting
  • Catcher's Call Game
  • Closers
  • Solitaire Modifications
    • Pitch Selection
  • Out-of-Position Fielders

Player Ratings

As in the game of baseball, everything starts with the pitch. In 4th Street Baseball, the pitcher's ability to throw the ball over the plate and get ahead in the count is key to his team winning the game.

The game engine is run by five dice: one 20-sided (d20), two 10-sided (d10), and two 6-sided (d6).

The d20 is typically used to determine the winner of a player "matchup". All matchups are offense (the batter) and defense (either against the pitcher or one of the fielders).

The two d10 are used in percentile creations. One d10 is colored, the other is white. The two are ordinarily combined in that sequence to create a value from "00" to "99". For example, a green d10 roll of "4" and a white d10 roll of "1" creates a value of "41."

The two d6 are used to determine play results. They are added together to create values from "2" to "12."

Player cards are of two types: pitcher and hitter.

Pitcher Cards

All pitchers contain a "Count" section and a "Match" (matchup) section.

The counts are listed in ball-strike format; a "1-2" count means 1 ball and 2 strikes. This is important because it helps determine strategy and also forces adjustments in the hitter's ratings, sometimes for benefit, sometimes as a detriment.

The matchup columns list the possible defensive matchups that the hitter could face in an at bat. The following table provides a description of each abbreviation found in the columns:

AbbrMatchup
PwGo directly to the hitter's power column
PHitter vs. pitcher's defensive column
CHitter vs. catcher's defensive column
1BHitter vs. first baseman's defensive column
2BHitter vs. second baseman's defensive column
3BHitter vs. third baseman's defensive column
SSHitter vs. shortstop's defensive column
LFHitter vs. left fielder's defensive column
CFHitter vs. center fielder's defensive column
RFHitter vs. right fielder's defensive column
vsPHitter vs. pitcher's appropriate pitching column

Each column has a "0" to "99" range. The roll of "00" ("0") starts at the top, with breaks on each of the different rows. In the "Count" column on the sample pitcher, rolls from "00" (0) to "06" (6) yield a "0-0" count. Rolls from "07" (7) to "22" (22) yield an "0-1" count. Rolls from "23" to "38" yield an "0-2" count, etc. The hitter also has a count column, which is used when the dice roll is from "80" to "99". This is initiated on the pitcher by the term "Bat", which is at the bottom of the pitcher's "Count" column.

The "Match" columns are used in the same manner, except that there is a match column used against left-handed hitters (marked "L") and another for use against right-handed hitters (marked "R").

These two sections are largely responsible for how a pitcher will fare in a ballgame, because the pitcher is largely in control of the count and where the ball is hit. A good pitcher will get ahead in the count with a higher frequency, and therefore reduce the grades of the hitters he faces. A good pitcher will also be able to keep the ball in the ballpark more effectively than a "gopher ball" pitcher. He will also be able to entice more double plays and lazy fly balls than some of his less-dominating contemporaries.

The next four columns on the pitcher are the pitching columns. The two on the left are labeled "vs LHB" and are separated from the two on the right, which are labeled "vs RHB". Each of these two sets include a column labeled "Fst" (fastball) and "Brk" (breaking ball). The number directly below the "Fst" or "Brk" heading is the pitcher's fastball or breaking ball grade, respectively. The grades run from 1 (very poor) to 10 (outstanding) and are used in comparison to the hitter's ratings. On the card shown, all of the pitcher's "Fst" and "Brk" grades are "5," indicating that he is, by and large, an "average" pitcher.

The columns contain results for dice rolls from 2 through 12.

Further to the right, there are the four "Hit" columns entitled "P", "IF", "OF", and "Pw". These are the pitcher's hitting columns and are only used when the pitcher is up to bat. Normal hitters have these columns for appearances against both left-handed and right-handed pitchers, but pitchers only have one set for use against both lefties and right-handers. Again, each of these has an individual grade, but this time they range from 10 (very poor) to 20 (outstanding). The following table gives a little more of an explanation of each column:

AbbrUsed in MatchupDetermination of Grade
PHitter vs. pitcherHitter's put-in-play percentage
IFHitter vs. infielderHitter's batting average
OFHitter vs. outfielderHitter's slugging percentage
PwHitter's powerHitter's homerun frequency

The first rating in "()" behind the word "Hit" is the player's Pull rating. Most pitchers receive a "+0" pull rating, but our sample pitcher is a dead-pull hitter to left field (rating of "-5."). The text that follows (in its own set of "()") is the count when the pitcher is hitting and the dice roll is from "80" to "99," since there isn't enough room for a hitting count column like there is on regular hitters.

The "Pw" grade is a little different than the others, and ranges from -5 to +5. This grade is sometimes used when ballpark effects are put into play.

The next set of two columns are labeled "Bn" (bunt) and "HR" (hit and run). The grades in these two columns are relative indicators of how good the player is at bunting and at the making contact, respectively, but are not actually used in matchups.

The last column, the "D" column, handles defense. Since pitchers are only graded for defending the mound they pitch on, they only have one grade labeled "P" (for "pitcher"). Defensive grades range from 1 (very poor) to 10 (outstanding).

Further ratings are displayed across the top of the pitcher. Some are pitching-related, some are hitting or base-running related. The following table gives a description of each type:

AbbrDescription
BtsPlayer "Bats" either "R", "L", or "B"
ThrPlayer throws either "R" or "L"
HldPitcher's ability to hold runners on base
PitchesPitcher rating that uses pitch count to determine fatigue. First rating is used when the pitcher is starting; rating in "()" is for use when the pitcher is relieving
EndurPitcher's endurance rating(s). First rating is for use as a starting pitcher; rating in "()" is for use as a reliever
ClsPitcher's closer rating, from -5 to +3
RunPlayer's base running rating, ranging from 0 to 20
InjPlayer's injury rating

Finally, the player's general stats for the season are listed at the bottom.

Hitter Cards

A hitter looks similar to the pitcher, except that the Count column only ranges from 80 to 99, the Match section isn't present, and additional hitting columns for use against left-handed and right-handed pitchers are included.

The first set of four columns is used vs. left-handed pitchers, and the second set of four is used vs. right-handed pitchers. The rating in "()" is the player's pull rating against that type of pitcher, and is used when ballpark effects are put into play. Bob Slugger has pull ratings of "+0" against both righties and lefties.

Like pitchers, each hitter has "P", "IF", "OF", and "Pw" grades and columns, but for hitters there is a set for use against each type of pitcher (left-handed or right-handed).

The next set of two columns, "Bn" and "HR", is used for bunting and hit-and-run plays, just as on the pitcher.

The "Defense" section contains grades for up to 4 different positions. Some players played multiple positions and don't have quite enough room for all of their grades, so they may have some combined. Symbols for these special cases are listed below:

AbbrDescription
OFUse this column for any of the 3 outfield positions
RLUse this column for RF and LF
S2Use this column for 2B and SS

Hitters also have several other additional ratings listed across the top, as explained by the descriptions below:

AbbrDescription
BtsPlayer "Bats" either "R", "L", or "B"
ThrPlayer throws either "R" or "L"
CHHitter's clutch hitting rating, ranging from -5 to +5
ArArm rating, ranging from -5 to +5
CThis is the catcher's arm rating, ranging from -5 to +5, and only appears on players who were rated as a catcher
RnPlayer's "run" rating, ranging from 0 to 20
JpPlayer's "jump" rating, used to determine whether he got a good enough jump in order to try to steal a base. Ranges from 0 to 20
StlPlayer's "steal" success rating, ranging from 0 to 20
InjPlayer's injury rating

The player's general batting stats are listed at the bottom.

Playing the Game

Select your teams, select the ballpark you want to play the game in, choose your pitchers and make out your starting lineups. Score sheets are included so that the batting order and positions can be filled in.

On each play, the count must first be determined as several adjustments and decisions are made based on the number of balls and strikes.

Roll the two d10 and combine them (colored die first, white die last). For example, a green "6" and a white "7" make a "67". Look for the range that this value falls in on the pitcher's "Count" column. A "67" on Jim Pitcher gives a "2-1" (two ball, one strike) count. The count is marked on the ball-strike-out section of the ballpark.

The defensive team now selects one of the defensive strategy cards to play and conceals it from view. These can be as simple as the type of pitch that will be thrown to calling for a pitchout. Below is a list of each strategy and a short description of each:

StrategyDescription
Fast BallPitcher will attempt to throw a fast ball for a strike
Breaking BallPitcher will attempt to throw a breaking ball for a strike
PitchoutPitcher will throw a ball intentionally wide so that the catcher has a better opportunity to cut down a suspected base stealer
Charge...An infielder will charge toward home in an attempt to cut off a bunt. Each of these cards also contains a pitch type (fast ball or breaking ball)

The offensive team now selects one of the offensive strategy cards to play, and both managers reveal their selection simultaneously.

Below is a list of offensive strategies and a short description of each:

StrategyDescription
Sit on Fast BallThe batter is "guessing" fast ball. If correct, a 2-point bonus is given to his grades. If incorrect, a 2-point reduction is made to his grades.
Sit on Breaking BallThe batter is "guessing" breaking ball. If correct, a 2-point bonus is given to his grades. If incorrect, a 2-point reduction is made to his grades.
SacrificeThe batter attempts to bunt in order to move the runners up a base. Cannot be used with a runner on 3rd base.
StealLeading base runner will attempt a straight steal. The batter will take the next pitch, even if it is a strike.
Hit-and-RunThe runners will take off with the pitch, and the batter will swing at it, even if it is a ball. The runners have a lower chance of stealing a base if the batter misses the pitch since they need to check to see whether the ball is put into play. On the other hand, they have a much better chance of advancing a base on a hit and keeping out of a double play on a ground out.
Send RunnersThis is similar to a hit-and-run play, but the batter won't necessarily swing at the pitch. Play proceeds normally, except the batter will be less likely to hit into a double play (but more likely to line into one). If the pitch is a ball or if the batter misses, the runners are more likely to be caught stealing. This choice is automatically selected with a 3-2 count and two outs for runners who are forced.
Contact Play ON

Let's assume that Jim Pitcher and Bob Slugger are facing each other with no one on and no one out in the first inning. The relevant ratings and results have been highlighted on the sample cards in order to make it easier to follow along.

To find the count, the two d10 are rolled, resulting in a green "3" and a white "9", a "39." Checking the pitcher's "Count" column reveals that the count is "1-0" (one ball, no strikes; rolls 39-41 would all have resulted in a 1-0 count). The batter is ahead in the count by one ball, and thereby receives a bonus of 1 point on all his grades.

The two managers have selected their strategy cards: the defense has chosen the Fast Ball strategy card, and the offense has also chosen the Fast Ball strategy card. The batter "guessed right" on the pitch.

All five dice are now re-rolled.

The two d10 are again combined and used to determine the matchup. Let's say that this time a green "5" and a white "3" are rolled for a value of "53." Looking under the "Match" section's "R" column (because Bob Slugger bats right-handed, as indicated by his "Bts" rating) on the pitcher (Jim Pitcher), we see that a "53" gives the hitter a matchup with the Pitcher ("vsP"). Rolls from 51-94 would all have resulted in "vsP" matchups when Jim Pitcher faces a right-handed batter.

The pitcher's fastball ("Fst") grade against right-handed batters (Bob Slugger bats right) is "5". The hitter's "P" grade vs. left-handed pitchers (Joe Pitcher is a lefty, as indicated by his "Thr" rating at the top of his card) is "15". Since the batter "guessed" correctly on the pitch, he receives a bonus of 2 points to his grade. Since he is also ahead in the count at 1-0, he receives another bonus of 1 point to his grade (2 balls minus 1 strike = +1). That puts him at "18".

We now subtract the defensive rating ("5") from the offensive rating ("18") and get a result of "13." This value is compared to the d20 roll: if it is from 1 to 13, the offensive player (the batter) wins the matchup. Otherwise, the defensive player (in this case, the pitcher) wins the matchup. As the d20 roll was a "4", Bob Slugger wins the matchup.

The two d6 are now added together. One d6 was a 3, the other d6 was a 4 for a total of "7". We look across from the "7" on Bob Slugger underneath his "P" column in the "vs LHP" section and discover a result of "44", as shown.

The result code of "44" is a walk. Results can be found on the Results and Base-Running Chart.

Had the d6 roll been a "6" or an "8," Bob Slugger would have struck out (a result code of "43").

Winning a matchup for an offensive player does NOT guarantee his getting on base, but it does increase the likelihood drastically. Comparatively, a defensive player winning a matchup will usually result in an out. But sometimes a fielder will be the victim of a bleeder getting through the infield or a bloop falling in front of an outfielder for a single.

Let's try another one with Bob Slugger up to bat, Jim Pitcher pitching, and Bobby Slaphitter playing 2B.

First, find the count. The d10 roll is "89", so the count is found on the hitter's card rather than on the pitcher's, and it sits at 2-1. The batter is ahead in the count at two balls, one strike. Since 2 minus 1 is +1, we will add 1 point to the batter's grades.

Let's say that the offense chooses the "Breaking Ball" strategy card while the defense chooses the "Fast Ball" strategy card. Since the batter guessed incorrectly, we will subtract 2 points from his grades when we find out what they are.

Re-roll all five dice. They are a d10 combination of "16", a d20 roll of "3", and a d6 total of "4".

The d10 combination ("16") is used to find the matchup. Looking under the "R" column in the "Match" section on the pitcher, the matchup is with the "2B" (second baseman; rolls from 10 through 19 would all be matchups with the second baseman on this pitcher when facing a right-handed batter).

The second baseman's (Bobby Slaphitter) fielding grade is "5". The hitter's "IF" grade against left-handed pitchers is "15", but we need to subtract 1 point (add 1 point for getting ahead at 2-1, subtract 2 points for guessing wrong on the pitch type) to put him at "14". 15 - 1 = 14 - 5 is "9", and the d20 roll is a "3". This means that the batter wins the matchup. The d6 roll was "4". Looking at Bob Slugger's card across from 4 under the "IF" column against left-handed pitchers, we find a result of "10", a single. Most other play results are found in similar fashion.

Power

When the matchup calls for "Pwr", the pitcher has "grooved one" to the batter. We need to find out if he hits the ball out of the park. The play result is automatically read off the "Pw" column of the batter using the d6 result, so there is no matchup to resolve.

Example: The count is 1-2, so the pitcher is ahead in the count. The 5 dice are re-rolled, with a d20 of "7", a d10 combo of "02" and a d6 total of "8". When we find the matchup on Jim Pitcher's "Match-R" column, we see that rolls "00" through "03" are matchups of "Pw", or "power."

We go directly to the hitter's "Pw" column (in this case, "vs LHP" since Joe Pitcher is a lefty) and look across from our d6 total of "8." The result code is "48", a homerun to center field!

A player's grade in his "Pw" columns ranges from -5 to +5 and is used when the matchup calls for ballpark effects. Bob Slugger's power grade is "+1" against both right-handed and left-handed pitchers.

Ball Park Effects

Before a game begins, check to see if there are any weather-related changes for the day's game. Rain, cold and hot weather, and wind all can play a role in how the game plays out.

Weather Effects

▼ marks the low range (wind blowing in, cold) and ▲ the high range (wind blowing out, hot); "---" means the effect is ignored.

MonthWind ▼ (blowing in)Wind ▲ (blowing out)RainTemp ▼ (cold)Temp ▲ (hot)
Apr0397140494
May029815---89
Jun019914---83
Jul019920---83
Aug

Before the game begins, roll the two d10 three times:

  • 1st Roll, Wind: If roll is less than or equal to the park's ▼ range, a strong wind is blowing in. If roll is greater than or equal to ▲ range, a strong wind is blowing out. When a "Prk" result comes up (explained in more detail later on in this section), add 1 to all d20 rolls of 11 or more if the wind is blowing out and subtract 1 from all ballpark d20 rolls of 11 or more if the wind is blowing in.
  • 2nd Roll, Rain: If roll is less than or equal to rain range, roll the two d10 before each new inning. If the colored d10 is 2 or under, the rain is beginning to fall, and there is at least a temporary delay in the game. Check the following table to see how long the rain delay lasts. If a "rainout" occurs, the game is called due to rain.
Color d10Delay begins?White d10Delay lasts
0Yes0rainout
1Yes115 min
2Yes230 min
3No345 min
4No460 min
5No575 min
6No

For each 15 minutes of delay, both pitchers lose 1 point on all their pitching grades (minimum of 1). You may want to remove a pitcher if his point total drops to a large degree. If rain begins falling before a pitcher takes the mound, he receives no penalty.

  • 3rd Roll, Temperature: If the game is played at night, subtract 10 from the dice roll (minimum dice roll of "00"). If the roll is less than or equal to the ▼ range, the temperature is below freezing. If the roll is greater than or equal to the ▲ range, the temperature is over 90 degrees. If the temperature is cold, both pitchers gain 1 point on all their pitching grades. If the weather is hot, both starters lose 3 points on their "Endur" (endurance) grade (10 off their "Pitches" grade). There is no effect on relievers.

When a range is marked as "---," ignore the effect altogether, no matter what the dice roll is.

Some teams play in domed stadiums (marked "Dome" on their stadium chart) or in retractable roof (marked "Retractable") stadiums. These parks are immune to rain, heat, and cold weather effects. Domed stadiums are immune to wind effects. Retractable roof stadiums can occasionally be affected by the wind; assume that the other elements are tolerable when this happens.

A few times a game, the park in which the game is being played may alter a play result. A deep fly out in one park can result in a homerun in another, or maybe a smash off the wall in still another park that ends up being a single instead of a double.

When matchups rolls call for "Prk" (ballpark), a couple of the batter's ratings and the positioning of fielders is used to find the play result.

Before the pitch, the defense has the opportunity to move its fielders around the baseball field. Outfielders may be "shaded" to the left or right. A first baseman can be asked to hold a runner on first. The third baseman can be asked to guard the line. Some or all of the infielders may be asked to play "in," etc.

This positioning can modify some of the other play results but is used mostly when ballpark effects are in question. The ballpark has been divided into "lanes" and "depths". There are 15 lanes (marked "A" through "O") and 16 depths (marked "1" through "20") as shown on the printed ballpark diagram. [Diagram not transcribed.]

The gray strips designate the depth where "normal" positioning occurs: the first gray strip (labeled "2-4") is for infielders, the second gray strip (labeled "7-9") is for outfielders. A series of "X" marks indicate where each of the 7 fielders (excluding the pitcher and catcher, who do not enter in to ballpark effect plays) would normally be positioned. These shaded regions represent the most likely areas to which the ball will be hit.

Deeper out, more areas have been darkened, indicating where the fence is located. In order to be hit out of the park, a ball must fly over the fence.

Once we know a "Prk" play is on, re-roll the dice:

  • The d20 is used to determine the depth to which the ball is hit. If the result is 11 or higher, batter's "Pw" grade (ranging from -5 to +5) is added to the die roll.
  • The d10 are combined in the usual manner and the lane to which the ball is hit is found by using the ranges listed right above depth 20 on the ballpark. After the lane is determined, add or subtract the number of lanes from the hitter's pull rating (this rating appears in "()" in the appropriate hitting column ("vs LHP" or "vs RHP")).

For example, let's say we have a hitter with a "Pw" rating of +2 and a pull rating against right-handed pitchers of -1, like Harry Henderson (pictured on the printed page). If a d20 roll of "6" and a d10 combo of "72" is thrown, then ordinarily the ball is hit to depth "6" and to lane "K." Since the d20 roll is less than 11, no adjustment is made to the depth. But because this hitter has a pull rating of -1, the ball is hit to lane "J" rather than lane "K."

Balls hit on ballpark effects are hot line drives, the type which can take the head off an unsuspecting fielder! To find out whether a defender successfully catches the ball, or whether the hit is trouble (or even a homerun), we need to look more closely at the fielders and fences.

Let's assume that the defensive manager has not moved his fielders from their "normal" positions:

  • Balls hit directly at fielders are automatically caught for outs.
  • Balls hit one lane to the left or right of a fielder, or one depth in front of or behind a fielder, can be caught if a new d20 roll is less than or equal to the fielder's grade for the position he is playing.

For more clarification, look at the ballpark picture on the printed page. The second baseman is positioned in lane "J", depth "2-4." If the ball is hit to lane "J" and if the d20 roll is 2, 3 or 4, the second baseman automatically catches the line drive for an out. If the runners were running with the pitch, then they are also out.

Figure 1: If hit directly at a fielder, the ball is caught for an out.

If the ball had been hit to lane "J" but the d20 roll was instead a "1" (hit to depth 1), the ball will only be caught if another d20 roll is less than or equal to the shortstop's "2B" grade.

Figure 2: If hit adjacent to a fielder, the ball is caught only if a new d20 roll is less than or equal to the fielder's grade for that position.

Balls that are not caught in the air by fielders (depths 1-10) are automatic singles, with all runners advancing two bases.

Balls that are not caught in the outfield and land in zones beyond the closest outfielder in depths 11-20 are doubles with runners advancing three bases except in two cases:

  • If the ball lands in a zone over the fence, the hit is a homerun.
  • If the ball strikes the wall in a shaded area (e.g., lane "M" depth "13" on the ballpark previously shown) the ball bounces back to the nearest outfielder and the offensive manager must choose whether to have his hitter attempt to advance to second for a double or hold up at first with a single. Base runners advance two bases.

If an outfielder was unsuccessful at "diving" for a ball hit adjacent to the zone he is positioned, (b) the d20 roll making him unsuccessful was out of his defensive range by 1, (c) the distance from the point the ball landed to the wall is at least 5 depths (include the wall when counting), and (d) the batter has a "Run" rating of at least 12, the hit is a triple. [The printed list begins at item (b); no item (a) appears in the source manual, so the list is transcribed as printed.]

Example: a left fielder with a "LF" grade of 5 is playing "normal" in lane C, depth 7-9. A line drive is hit to lane D depth 8, meaning the LF has a chance to dive and catch the ball. A second d20 roll is a 6; he would have caught the ball had it been a 1-5. The batter's "Run" rating is 13. Since the fence is located seven depths behind where the ball landed, the hit goes for a triple. (Otherwise, the play would have been a single.)

On the same type of play, a fielder diving in an attempt to come up with a line drive: if the d20 roll is "20", the fielder may be injured. Consult the injury chart for more details.

Balls that land in either lane "A" or lane "O" (both of these lanes are "down the line") and are not successfully fielded are doubles, regardless of the depth (except for homeruns, of course) with runners advancing 3 bases.

When adding or subtracting lanes due to a hitter's pull rating, the minimum lane is "A," the maximum lane is "O." In other words, ballpark results are always fair balls.

Base Runner Advancement

At times, base runners and batters may attempt to advance an extra base.

Add the outfielder's "Arm" grade to the batter's "Run" rating and re-roll the d20. If the d20 is less than or equal to this adjusted total, the batter or runner successfully advances. Otherwise, he is thrown out.

Add 5 to a base runner's chances if there are two outs in the inning (this bonus is only awarded to a runner already on base, and not to a hitter who has just reached base safely).

If a runner is on base, the batter hits a single or double, and the lead runner attempts to advance an extra base, the batter may also attempt to advance on the throw. Once the offensive manager has announced that he is sending the lead runner, both managers select their appropriate base-running strategy card; the offensive manager can choose the "Send Batter" card or the "Hold Batter" card, while the defensive manager can choose the "Cut Throw" or the "Throw Through" card.

Whenever there is a play on the lead runner and the runner is safe and the d20 roll is a "1", there is a chance that the outfielder has committed a 1-base throwing error. Roll the d20 and the two d6 and consult the outfielder's fielding column; if the result code is a 2 through 9 and the d20 is less than or equal to the result code, an error has been committed. If the d20 is a "1," all runners advance 2 bases.

After both managers reveal their strategy cards, the following scenarios are resolved:

Base Running Strategy Cards

OffenseDefenseResolution
SendCut ThrowAll runners advance automatically. If d20 re-roll is less than or equal to batter's "Run" rating minus 5, batter also advances an extra base. Otherwise, batter is thrown out attempting to advance.
SendThrow ThroughThere is a play on the lead runner. Resolve it as directed. All other runners and the batter advance one base.
HoldCut ThrowAll runners advance automatically. The batter holds.
HoldThrow ThroughThere is a play on the lead runner. Resolve it as directed below. All other runners advance one base. The batter holds.

Base Running Adjustments & Resolution

Runner's "Run" grade + outfielder's "Arm" + 5 if there are 2 outs + any adjustments from results table.

Stealing Bases

When the offensive manager lays down the "Steal" strategy card, a series of events takes place:

  • The batter will not swing at the pitch, and we need to determine whether the pitch was a ball or strike. Use the d10 combo and look in the Count column on the pitcher. If the result there has a number of strikes that is greater than or equal to the number of balls, the pitch is a strike. Otherwise it is a ball. If the batter already had two strikes on him and the pitch is a strike, the batter has struck out. If the batter already had three balls on him and the pitch is a ball, the batter walks.
  • The d20 is compared to the base runner's "Jmp" rating. If it is less than or equal to this grade, the base runner got a good jump and automatically attempts to steal. If he did not get a good jump, he can attempt to steal, but at a reduced level. He may also choose to return to his original base.
  • If the steal attempt is still on, add the catcher's "C" (arm) grade and the pitcher's "Hld" (hold) grade to the base runner's "Stl" grade. If the base runner was not held, add 5 points. Then, re-roll all the dice. If the d20 is less than or equal to the base runner's adjusted grade, the attempt is successful. If the runner is safe, add the two d6 and look in the catcher's fielding column; if the result code there is 1 through 9, the catcher throws the ball into centerfield if a new d20 roll is less than or equal to the result code, and all runners advance 1 base. If the d20 is a "1", all runners advance 2 bases.
  • If the base being stolen is second, make no adjustments to the above. If the base being stolen is third, subtract 5 points from the adjusted "Stl" grade. If the base being stolen is home, subtract 15 points from the adjusted "Stl" grade, but do not add the catcher's "Arm" grade.
  • If the defensive manager lays down the "Pitchout" strategy card, the base runner automatically gets a poor jump and may not retreat back to his original base. He MUST attempt to steal.
  • If the base runner gets a poor jump, subtract 10 from his adjusted "Stl" grade. Unless the defense has pitched out, the runner may abort the steal attempt and retreat back to his original base.

Stealing Adjustments

Second BaseThird BaseHome
Runner's "Stl" gradeRunner's "Stl" gradeRunner's "Stl" grade
+ catcher's "C"+ catcher's "C"+ pitcher's "Hld"
+ pitcher's "Hld"+ pitcher's "Hld"+ 5 if runner is not held
+ 5 if runner is not held+ 5 if runner is not held-15 penalty for stealing home
-10 if runner gets a poor jump-5 penalty for stealing 3rd-10 if runner gets a poor jump
-10 if runner gets a poor jump

Minimum steal chance after adjustments is 1.

Holding Runners

The defensive manager may choose to hold runners on base in an attempt to prevent them from stealing and/or from preventing them from advancing extra bases on hits to the outfield.

  • To hold a runner on at first base, the first baseman must be positioned in lane "O", depth 1. This greatly reduces the likelihood that the first baseman will successfully field a line drive hit to him when a "Prk" result comes into play.
  • To hold a runner on at second, either the shortstop or second baseman must be positioned in depth 1 in either lane "G", "H", or "I".
  • To hold a runner on at third, the third baseman must be positioned in lane "A", depth 1.

Holding runners on at first is commonplace. Holding them at second is also common. Holding them at third is more of a rarity. You need to consider the speed of the runner(s), the out situation, and the ball-strike count when deciding whether to hold a runner on. For example, holding a runner on at first with two outs and a 3-2 count is unnecessary: the result will either be a walk (moving the runner automatically), a strike (and the end of the inning), or a hit ball (in which case the runner will be on the move, anyway).

A base runner attempting to steal receives a bonus of +5 if he is NOT held. A base runner given the opportunity to advance an extra base has a penalty of -2 points if he IS held.

Hit and Run

At times, your offense may need an extra spark. Sending the runners and attempting to have your hitter spank a hit through a vacated spot in the infield can work wonders.

When the offensive manager plays the "Hit and Run" strategy card, the dice are rolled with the batter automatically winning the matchup. His "HR" column will be used to find the result.

All runners (except a runner on third base) will be running with the pitch. The batter will always swing at the pitch, even on a pitchout, so you should be careful when calling for a hit and run play with two strikes on the batter as he may automatically strike out. If the play is a strike, use the base stealing procedures to determine whether the runners steal successfully. The runners automatically have poor jumps and may not retreat to their original base.

The defense must move its fielders in order to cover a base in case the pitch is a ball or strike and the runner(s) are attempting a stolen base. The defense will attempt to throw out the lead base runner. If the lead runner is on at first, look at the hitter to determine whether the shortstop or the second baseman covers second base; if the hitter is batting right-handed, the second baseman covers the bag. If the hitter is batting left-handed, the shortstop covers the bag. Move the appropriate player to lane "H", depth 1 to receive the throw.

If the lead runner is on at second, the defense will attempt to throw out the runner at third base. Move the third baseman to lane "A", depth 1.

If the lead runner is on at third base, he will not be running with the pitch. Use the next runner as the lead runner.

On singles and doubles, add a bonus of +5 to the base runners when they attempt to advance an extra base.

Sending Runners

Sending runners is similar to calling for a hit and run play, except that:

  • it is done only when the count is full
  • a runner occupies first base
  • bases are not loaded, OR bases are loaded with two out

The batter will not automatically swing at the pitch, and the "HR" column is not used to find the result of the play. Instead, find the result as you normally would except that:

  • The hitter's grades are all reduced by 2 because the pitcher wins the fast ball/breaking ball "guess."
  • A result of "43" is a strikeout. If this is not the third out of the inning, the runner(s) must attempt to steal.

If the result is a strikeout and there are still fewer than 3 outs, then the base runners must attempt to steal. Use the same procedures as with a hit and run play.

Results from "60" to "66" (double plays) are changed to "50" to "56" (ground outs with runners advancing a base).

Results "80", "81", and "83" through "86" (line drive outs) result in all runners (except runners on third base) being doubled (or tripled) off.

On singles and doubles, add a bonus of +5 to the base runners when they attempt to advance an extra base.

The defense must move its fielders in order to cover a base in case the runner(s) are attempting to steal. The defense will attempt to throw out the lead base runner. If the lead runner is on at first, look at the hitter to determine whether the shortstop or the second baseman covers second base; if the hitter is batting right-handed, the second baseman covers the bag. If the hitter is batting left-handed, the shortstop covers the bag. Move the appropriate player to lane "H", depth 1 to receive the throw.

If the lead runner is on at second, the defense will attempt to throw out the runner at third base. Move the third baseman to lane "A", depth 1.

If the lead runner is on at third base, he will not be running with the pitch. Use the next runner as the lead runner.

Bunting

There are three different bunting plays: sacrifice, safety squeeze, and suicide squeeze. A sacrifice is an attempt to move runners up one base from first and/or second base. A suicide squeeze is a bunt play in which a runner sprints home from third while the batter attempts to successfully lay down a bunt in fair territory; the batter will attempt to bunt the pitch no matter where it is thrown. A safety squeeze is similar to a suicide squeeze, except that the runner on third only runs when the ball is actually bunted, and the batter has the option to lay off the pitch if it is out of the strike zone.

In all three cases, the hitter's "Bn" column is used as he automatically wins the matchup.

Find the count as in all other plays. (If the count already includes 3 balls and/or 2 strikes, you may wish to reconsider your decision to bunt.) The two managers select their strategy cards and reveal them simultaneously. All five dice are rolled, and the result of the play is found using the d6 total in the hitter's "Bn" column.

When finding the results, assume that the contact play is ON when a squeeze play (either suicide or safety) is on. Make the following adjustments for these play results:

CodeResultSuicide squeezeSafety squeeze
21BallRunner on 3rd must attempt to steal homeNo change
22StrikeRunner on 3rd must attempt to steal homeNo change
60-66Hard buntRunner on 3rd scores. Batter is thrown out at first base.No change
90-96PopupRunner on 3rd is tagged out on an unassisted double play by the fielderRunner on 3rd holds

Suicide squeeze and safety squeeze plays should not be called when bases are loaded.

A fielder may also commit an error on a bunt, so after finding out who fielded the bunt, re-roll the dice and check the fielder's column. If the two d6 combine to give a result number from 2 through 9, compare the d20 as you normally would to see if an error occurred (e.g., a code of "3" comes up on the fielder's card. On d20 rolls of 1, a two-base error occurs. On d20 rolls of 2-13, a one-base error has occurred.)

An error replaces any "out" play result that had been found previously. For example: the offensive manager elects to bunt with runners on first and second and nobody out. The result of the play found in the batter's "Bn" column is "53", normally a 3-1 putout (first baseman to pitcher), with the runners advancing one base. The dice are re-rolled, and looking under the first baseman's fielding column across from the d6 total, we see a "4". On d20 rolls of 1-14 an error occurs (on a d20 roll of 1, a two-base error occurs. On d20 rolls of 2-14 a one-base error occurs). If the d20 were a 9, an error occurs with the batter reaching base safely and the other two runners advancing one base each. The bases are now loaded with still nobody out.

Defending the Bunt

The defense can attempt to cut down a bunt by "charging" an infielder. Move the infielder to the inner portion of the diamond (in other words, he is not in any of the lanes or depths and cannot field any "Prk" chances hit his way).

If the ball is bunted to the charging infielder, subtract the defender's defensive rating from the batter's "Bn" (bunt) rating and compare the result to the d20. If the d20 is less than or equal to the calculated total, the runners move ahead safely. If not, the lead runner is thrown out, other runners advance 1 base, and the batter is safe at first.

For example, a batter bunts with runners on 2nd and 3rd and the result code found in his column is a "53". The defensive manager has elected to charge his first baseman on the play. This ball is hit to the first baseman, and his defensive rating is "6". The bunter's "Bn" rating is "17". The d20 roll on the play was a "12". Since 12 is greater than 11 (17 - 6 = 11), the lead runner (on 3rd) is thrown out, the runner on first advances to second, and the batter reaches first base safely. Had the d20 roll been 11 or less, the runners would have advanced successfully, and the batter would have been thrown out at first base.

If the defense elects to charge an infielder and the offense does NOT bunt, the player is out of position. Add 5 points to the batter's "IF" rating if the charging infielder is involved in the matchup.

There are several different "Charge Infielder" defensive strategy cards to play.

The defense can also call for a pitchout. The play is a ball (play result "21") unless the offense called for a suicide squeeze, in which case it is a strike (play result "22").

Infield In

When the defense plays the infield in, ground balls hit directly at fielders will quite likely cut a runner down at the plate. The downside is that a hard-hit ball that ordinarily would be fielded by an infielder will quite possibly sneak through for a base hit.

You may play all, some, or none of your infielders "in" by placing them in depth 1 of any lane. Give the batter a bonus of +3 on his "IF" grade in matchups which include an infielder who is playing "in".

When finding a result on the result chart, use the "Infield In" rows only when the infielder in question is playing in. For example, if the defense chooses to play the corner infielders (first baseman and third baseman) "in" and the middle infielders (second baseman and shortstop) at regular depth, and a ball is hit to the shortstop, use the "Infield Back" rows rather than the "Infield In" rows.

Contact Play

The contact play is an offensive strategy which sends a runner home from third base as soon as the ball is hit on the ground. If the ball is hit hard enough, the runner might be cut down at the plate. If the ball is hit softly, the runner will almost certainly score. You can either call the contact play "on" or "off". This is a strategy card that is played when a runner is on third base with fewer than two outs. When the bases are loaded, the contact play is automatically "on".

Injuries

Occasionally a player will be injured. Roll the d20, add the player's "Inj" grade to the roll, and refer to the injury table.

Pitcher Fatigue

There are two options for tracking pitcher fatigue: "Endurance" and "Pitch Count".

  • The "Endurance" method tracks pitcher fatigue by counting the number of batters a pitcher has faced. Pitchers become fatigued when the number of batters they have faced exceeds their "Endur" (endurance) grade during a game.
  • The "Pitch Count" method tracks pitcher fatigue by counting the number of pitches a pitcher has thrown. Pitchers become fatigued when the number of pitches they have thrown exceeds their "Pitches" grade during a game.

After surpassing their endurance or pitches level, each time a batter successfully reaches base by hit, walk, error, or being hit by a pitch, all defensive grades are reduced by 1, including those for fielders.

You can track the number of batters faced by placing a "red card" in the lineup stack or making a mark on the scoresheet. For example, if a pitcher's endurance grade is a "26," the card should be placed behind the 8th batter in the opponent's lineup (26 ÷ 9 = 2 remainder EIGHT). The pitcher will not experience fatigue the first two times through the order, and then begins experiencing fatigue when batters reach after facing the 8th player in the lineup the third time through.

Jim Pitcher's "Endur" rating is "20" when he starts, "5" when he relieves. If he's starting, place the red card following the second hitter in the opponent's lineup (20 ÷ 9 = 2 remainder TWO).

If you prefer to use the pitch count method, track the number of pitches thrown on the game board.

Pitches are counted as follows:

If the count was found on the pitcher and result is a:

  • Walk: add appropriate number of pitches to count in order to give 4 balls
  • Strikeout: add appropriate number of pitches to count in order to give 3 strikes
  • All others: add 1 pitch to count

If the count was found on the batter:

  • Same as above unless there were two strikes in the count, in which case the batter fouled off the following number of pitches, which are added to the above total (use the second dice roll, the one used to find the play result, for the d6 and/or d20 roll):
d6 total23456789101112
Foul balls6543212378d20

Examples:

  • Count is 1-2 (found on pitcher), and batter ends up walking. Pitch count on this plate appearance is 6 (1-2 count for 3 pitches, 3 more pitches to get to 4 balls).
  • Count is 1-1 (found on pitcher), and batter ends up striking out. Pitch count on this plate appearance is 4 (1-1 count for 2 pitches, 2 more pitches to get to 3 strikes).
  • Count is 1-1 (found on batter), and batter ends up striking out. Pitch count on this plate appearance is calculated exactly as in example above because when the count was determined there was only 1 strike and not 2.
  • Count is 1-2 (found on batter), the d6 total is "11", and the batter ends up striking out. Pitch count on this appearance is 12 (1-2 count for 3 pitches, 8 pitches were fouled off, 1 more pitch to get to 3 strikes).
  • Count is 3-2 (found on batter), the d6 total is "4", and the batter hits a double. Pitch count on this plate appearance is 10 (3-2 count for 5 pitches, 4 pitches were fouled off, 1 more pitch which was hit for the double).
  • Count is 2-2 (found on batter), the d6 total is 12, the d20 roll is 14, and the batter walks. Pitch count is 20 (2-2 count for 4 pitches, 14 pitches were fouled off, 2 more pitches to get to 4 balls).

Clutch Hitting

A clutch hitting opportunity is defined in this game as any at bat in which a runner or runners are in scoring position (on 2nd and/or 3rd base) when neither team is leading by more than 2 runs in the 7th inning or later.

Add the batter's "CH" grade to all his other grades whenever this situation arises.

Catcher's Call Game

In "clutch" situations (defined immediately above), add the catcher's "Call" rating, which is found at the top of his defensive section, to his team's defensive grade total.

Closers

All pitchers have been given "Cls" (closer) grades, and some are more effective than others when the game is on the line.

When a pitcher enters the game in the 8th inning or later with the lead and the winning or tying run is either on base, up to bat, or in the on-deck circle, add the pitcher's "Cls" grade to all his pitching grades (not his fielding grade) for the remainder of that inning. Continue adding the closer grade to all his grades until he is either removed from the game or until his team is behind.

Solitaire Modifications

Pitch Selection

A solo pitch selector is located on the back of the Weird Play chart. Using the chart is fairly quick and simple. When determining the count, roll all 5 dice rather than just the two d10. Use the two d10 to determine the count, as usual. Use the d20 to determine what type of pitch the pitcher will throw, and the two d6 to determine which type of pitch the batter will "sit on".

Since pitchers would naturally throw more fastballs if their fastball was their best pitch, the "Fst - Brk" column separates the pitchers by their best pitch. To use it, just subtract the pitcher's "Brk" grade from his "Fst" grade.

The row next the "Fst - Brk" index is cut into two strips: one is shaded and is the fastball range, the other is not shaded and is the breaking ball range. If the d20 roll is in the fastball range, the pitcher throws a fastball. If not, he instead throws a breaking ball.

An additional set of numbers is listed in the fastball range of the pitcher. This is the batter's guess range for the fastball. For example, in the -3 "Fst - Brk" strip, the batter will guess fastball on d6 rolls of 2-5 and 11, and guess breaking ball on the other rolls.

Fst - BrkFastball on d20 rollBatter guesses fastball on d6 total
+51-152-8, 11
+41-142-8
+31-132-7, 11, 12
+21-122-7, 12
+11-112-6, 11
01-102-6, 11, 12
-11-92-6, 12
-21-82-5, 10, 12
-3

[The printed chart is graphical: the fastball range is the shaded bar running from d20 roll 1 to the number shown, and the batter's guess values are printed inside each bar. Values are transcribed from the bars, and the +2 row is checked against the printed example.]

Example: All 5 dice are thrown, and the two d10 are used to determine the count, as normal. The d20 is a 7 and the two d6 add up to 9. The pitcher is facing a right-handed batter, and his "Fst" and "Brk" grades against right-handers are "8" and "6", respectively.

We first determine the "Fst - Brk" differential, which is +2 (8 - 6 = 2). This is the row we'll use for the pitch selection. As you can see in the chart, rolls 1-12 are the fastball range for our pitcher. Since the d20 is a 7, he throws a fastball. Had the d20 been a 13 or higher, he would have thrown a breaking ball.

The batter will guess fastball if the d6 total is from 2-7 or 12. Since the d6 total is 9, the batter guesses breaking ball. He guessed incorrectly, so is penalized 2 points on all his grades.

Out-of-Position Fielders

Playing a fielder in a position that he is not accustomed to is not recommended. However, on occasion, it may become a necessity.

The defensive grade for players out of position is automatically "0." Use the following for their defensive column:

d6 totalC1B2B3BSSLFCFRF
24223142516272829
34113141516171819
441131415

A defensive player who plays a "like" position may use that position's defensive column and rating, with the following changes:

Rated ForOut of PositionPenalty
CNo equivalenceUse rules above
1BNo equivalenceUse rules above
2BSS, 3BReduce rating by 2
SS2B, 3BReduce rating by 2
3B2B, SSReduce rating by 4
2B, 3B, SS1BReduce rating by 2
OFAny other OFReduce rating by 2

Some of the results on a player's card may need to be altered slightly. For example, if a result of "27" occurs on a LF who is playing out of position in CF, change the result to a "28" instead.

The minimum defensive rating for any player meeting the above criteria is "1." If the player is playing a position for which he is not rated comparably, his defensive rating is "0."

Out-of-position catchers are assigned a "+5" arm. Players playing out of position in the outfield (in other words, he has not been rated for any outfield position) is also assigned a "+5" arm. Outfielders playing out of position in another outfield spot should use the same arm rating as they normally would.

PrkLine drive. Determine result on the ballpark
With a runner on at third and fewer than two outs, any ball hit will send the runner toward home. The play will likely either result in a run or an out at home plate. Each of these cards also includes the type of pitch (fast ball or breaking ball) the batter will "sit" on.
Contact Play OFFJust the opposite of the contact play ON.
Safety SqueezeWith a runner on at third, the batter attempts to bunt in order to advance the runner(s). The runner on at third will not run toward home until he sees the ball safely on the ground.
Suicide SqueezeWith a runner on at third, the batter attempts to bunt in order to advance the runner(s). The runner on at third sprints toward home with the pitch. If the ball is popped up, it will result in a double play. If the pitch is not bunted by the batter, the runner will most likely be caught attempting to steal home.
01
99
14
---
84
Sep019916---90
Oct039712---97
6
100 min
7No7115 min
8No8130 min
9No9rainout
1-7
2-5, 11
-41-62-5
-51-52-4, 11
16
17
18
19
54113141516171819
699999999
799999999
899999999
94113141516171819
104113141516171819
114113141516171819
124223142516272829